SAIL

Water Woes

Without much reflection, I recently replaced my broken bilge pump with a slightly larger model.

after all, I thought, surely an 800 gallon-per-hour (gph) pump will outperform the previous 500gph unit? Well, yes, but that’s no reason to feel much safer, as I soon discovered.

The reason is that no pump is designed to deliver its rated output for long—at least not in real-world scenarios. And even a modest breach in the hull is likely to overpower the pumps supplied with most boats—just look at ingress rates on the opposite page in the Fig. 1. Small wonder that the Coast Guard attended over 1,100 distress calls last year to vessels taking on water.

Part of the problem is that boatbuilders simply aren’t required to supply a system that can deal with damage control. Between the strict requirements of the European Union’s Recreational Craft Directive and the American Boat and Yacht Council’s (ABYC) guidelines, boats only need to be equipped with a system to remove “normal accumulations” of water in the bilge—meaning occasional spray, rainwater or slow leaks.

As ABYC technical standards specialist David Broadbent says, “Our construction standards

You’re reading a preview, subscribe to read more.

More from Sail

Sail2 min read
Sailing Scene
ARE YOU OUT THERE SAILING, CRUISING AND LIVING THE SAILING LIFE? Share your experiences with other readers. Send your photos to sailmail@sailmagazine.com And don’t forget to sign up for our free eNewsletter, Under Sail, at sailmagazine.com/newsletter
Sail2 min read
Cruising Tips
In these days of electronic routes, the obvious option is to steer for the shortest distance between two points. In heavy seas, however, particularly if they are on the beam, sticking slavishly to this doctrine can be uncomfortable or worse. Put simp
Sail4 min read
An Undefinable Something
The year is 1966, in the heart of Orange County, California, when White Seal is laid up in fiberglass, by hand, at the Jansen Marine Yacht Yard. Fresh off the production line at the height of a booming marine industry, the boat’s gelcoat and varnish

Related