Mathematics in Science and Engineering Series
3.5/5
()
About this series
Proper Orthogonal Decomposition Methods for Partial Differential Equations evaluates the potential applications of POD reduced-order numerical methods in increasing computational efficiency, decreasing calculating load and alleviating the accumulation of truncation error in the computational process. Introduces the foundations of finite-differences, finite-elements and finite-volume-elements. Models of time-dependent PDEs are presented, with detailed numerical procedures, implementation and error analysis. Output numerical data are plotted in graphics and compared using standard traditional methods. These models contain parabolic, hyperbolic and nonlinear systems of PDEs, suitable for the user to learn and adapt methods to their own R&D problems.
- Explains ways to reduce order for PDEs by means of the POD method so that reduced-order models have few unknowns
- Helps readers speed up computation and reduce computation load and memory requirements while numerically capturing system characteristics
- Enables readers to apply and adapt the methods to solve similar problems for PDEs of hyperbolic, parabolic and nonlinear types
Titles in the series (100)
- Differential Forms with Applications to the Physical Sciences by Harley Flanders
11
In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation; methods for low-rank matrix approximations; hybrid methods based on a combination of iterative procedures and best operator approximation; and methods for information compression and filtering under condition that a filter model should satisfy restrictions associated with causality and different types of memory. As a result, the book represents a blend of new methods in general computational analysis, and specific, but also generic, techniques for study of systems theory ant its particular branches, such as optimal filtering and information compression. - Best operator approximation, - Non-Lagrange interpolation, - Generic Karhunen-Loeve transform - Generalised low-rank matrix approximation - Optimal data compression - Optimal nonlinear filtering
- Random Processes in Nonlinear Control Systems by A A Pervozvanskii
15
In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation; methods for low-rank matrix approximations; hybrid methods based on a combination of iterative procedures and best operator approximation; and methods for information compression and filtering under condition that a filter model should satisfy restrictions associated with causality and different types of memory. As a result, the book represents a blend of new methods in general computational analysis, and specific, but also generic, techniques for study of systems theory ant its particular branches, such as optimal filtering and information compression. - Best operator approximation, - Non-Lagrange interpolation, - Generic Karhunen-Loeve transform - Generalised low-rank matrix approximation - Optimal data compression - Optimal nonlinear filtering
- Optimization Techniques: With Applications to Aerospace Systems
5
During the past decade there has been a remarkable growth of interest in problems of systems optimization and of optimal control. And with this interest has come an increasing need for methods useful for rendering systems optimum. Rising to meet this challengc there have sprung up various “schools, often championing onc method and regarding it superior to all others. Long experience has shown that life is not so simple, that the picture is not all white and black. In short, one may expect that a particular method is superior to others for the solution of some problems-rarely for all problems. Furthermore, since the basic mathematical formulation of optimization problems is often essentially the same in many approaches, it is not unreasonable to expect that there may be a great deal of similarity among various methods, a similarity - often, indeed, an identity-which is obscured by dissimilarities in language and notation. To help the uncommitted in his search for and rhoice of the optimum optimization technique is the fundamental aim of this volume. To accomplish this aim there are assembled in one book ten chapters dealing &h the various methods currently espoused for the solution of problems in systems optimization and optimal control. The choice of authors has been dictated solely by a consideration of an author’s interest and expertiless in a particular method. With the advantages of such an eclectic approach and the ensuing multiple authorship there comes some loss of smoothness of over - all presentation, for which the Editor must take the sole blame. On the one hand, correlation between the various chapters has been achieved by cross-referencing; on the other hand, each chapter can be read as a separate entity setting forth the technique championed by a particular “School. While each of the ten chapters dealing with methods includes simple examples, primarily for didactic purposes, it has been thought useful to present four additional chapters dealing with applications alone. Of these, the first three, Chapters 11-13, cover specific optimization problems, and the final chapter contains a discussion of problems in the optimization of a complete system, in this case a nuclear propulsion system.
- Nonlinear Partial Differential Equations in Engineering
18
Nonlinear Partial Differential Equations in Engineering
- Plastic Flow and Fracture in Solids by Tracy Y Thomas
2
In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation; methods for low-rank matrix approximations; hybrid methods based on a combination of iterative procedures and best operator approximation; and methods for information compression and filtering under condition that a filter model should satisfy restrictions associated with causality and different types of memory. As a result, the book represents a blend of new methods in general computational analysis, and specific, but also generic, techniques for study of systems theory ant its particular branches, such as optimal filtering and information compression. - Best operator approximation, - Non-Lagrange interpolation, - Generic Karhunen-Loeve transform - Generalised low-rank matrix approximation - Optimal data compression - Optimal nonlinear filtering
- Optimal Control Systems by AA Fel'Dbaum
22
In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation; methods for low-rank matrix approximations; hybrid methods based on a combination of iterative procedures and best operator approximation; and methods for information compression and filtering under condition that a filter model should satisfy restrictions associated with causality and different types of memory. As a result, the book represents a blend of new methods in general computational analysis, and specific, but also generic, techniques for study of systems theory ant its particular branches, such as optimal filtering and information compression. - Best operator approximation, - Non-Lagrange interpolation, - Generic Karhunen-Loeve transform - Generalised low-rank matrix approximation - Optimal data compression - Optimal nonlinear filtering
- Control Systems Functions and Programming Approaches by Dimitris N Chorafas
27
In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation; methods for low-rank matrix approximations; hybrid methods based on a combination of iterative procedures and best operator approximation; and methods for information compression and filtering under condition that a filter model should satisfy restrictions associated with causality and different types of memory. As a result, the book represents a blend of new methods in general computational analysis, and specific, but also generic, techniques for study of systems theory ant its particular branches, such as optimal filtering and information compression. - Best operator approximation, - Non-Lagrange interpolation, - Generic Karhunen-Loeve transform - Generalised low-rank matrix approximation - Optimal data compression - Optimal nonlinear filtering
- Network Flow, Transportation, and Scheduling; Theory and Algorithms
57
Network Flow, Transportation, and Scheduling; Theory and Algorithms
- Dynamic Programming in Chemical Engineering and Process Control by Sanford M Roberts
12
In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation; methods for low-rank matrix approximations; hybrid methods based on a combination of iterative procedures and best operator approximation; and methods for information compression and filtering under condition that a filter model should satisfy restrictions associated with causality and different types of memory. As a result, the book represents a blend of new methods in general computational analysis, and specific, but also generic, techniques for study of systems theory ant its particular branches, such as optimal filtering and information compression. - Best operator approximation, - Non-Lagrange interpolation, - Generic Karhunen-Loeve transform - Generalised low-rank matrix approximation - Optimal data compression - Optimal nonlinear filtering
- Stochastic Models, Estimation, and Control
3
This volume builds upon the foundations set in Volumes 1 and 2. Chapter 13 introduces the basic concepts of stochastic control and dynamic programming as the fundamental means of synthesizing optimal stochastic control laws.
- Mathematical Theory of Connecting Networks and Telephone Traffic
17
Mathematical Theory of Connecting Networks and Telephone Traffic
- Lectures on Functional Equations and Their Applications
19
Numerous detailed proofs highlight this treatment of functional equations. Starting with equations that can be solved by simple substitutions, the book then moves to equations with several unknown functions and methods of reduction to differential and integral equations. Also includes composite equations, equations with several unknown functions of several variables, vector and matrix equations, more. 1966 edition.
- Dynamic Programming and the Calculus of Variations
21
Dynamic Programming and the Calculus of Variations
- Adaptive Processes in Economic Systems by Roy E Murphy
20
In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation; methods for low-rank matrix approximations; hybrid methods based on a combination of iterative procedures and best operator approximation; and methods for information compression and filtering under condition that a filter model should satisfy restrictions associated with causality and different types of memory. As a result, the book represents a blend of new methods in general computational analysis, and specific, but also generic, techniques for study of systems theory ant its particular branches, such as optimal filtering and information compression. - Best operator approximation, - Non-Lagrange interpolation, - Generic Karhunen-Loeve transform - Generalised low-rank matrix approximation - Optimal data compression - Optimal nonlinear filtering
- Methods of Nonlinear Analysis
61
In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation; methods for low-rank matrix approximations; hybrid methods based on a combination of iterative procedures and best operator approximation; and methods for information compression and filtering under condition that a filter model should satisfy restrictions associated with causality and different types of memory. As a result, the book represents a blend of new methods in general computational analysis, and specific, but also generic, techniques for study of systems theory ant its particular branches, such as optimal filtering and information compression. - Best operator approximation, - Non-Lagrange interpolation, - Generic Karhunen-Loeve transform - Generalised low-rank matrix approximation - Optimal data compression - Optimal nonlinear filtering
- Linear Systems of Ordinary Differential Equations, with Periodic and Quasi-Periodic Coefficients
28
Linear Systems of Ordinary Differential Equations, with Periodic and Quasi-Periodic Coefficients
- Dynamic Programming: Sequential Scientific Management
37
This work discusses the value of dynamic programming as a method of optimization for the sequential phenomena encountered in economic studies or in advanced technological programs such as those associated with space flights. The dynamic programs which are considered are defined for a deterministic universe, or one with probabilities; both categories are of equal importance in the practice of operations research or of scientific management.
- Function Theoretic Methods in Partial Differential Equations
54
Function Theoretic Methods in Partial Differential Equations
- Variable Phase Approach to Potential Scattering by F Calogero
35
In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation; methods for low-rank matrix approximations; hybrid methods based on a combination of iterative procedures and best operator approximation; and methods for information compression and filtering under condition that a filter model should satisfy restrictions associated with causality and different types of memory. As a result, the book represents a blend of new methods in general computational analysis, and specific, but also generic, techniques for study of systems theory ant its particular branches, such as optimal filtering and information compression. - Best operator approximation, - Non-Lagrange interpolation, - Generic Karhunen-Loeve transform - Generalised low-rank matrix approximation - Optimal data compression - Optimal nonlinear filtering
Related to Mathematics in Science and Engineering
Related ebooks
Vector Calculus Rating: 4 out of 5 stars4/5Applied Mathematics: Made Simple Rating: 4 out of 5 stars4/5Outline Course of Pure Mathematics Rating: 5 out of 5 stars5/5Elements of Classical Physics Rating: 0 out of 5 stars0 ratingsPrinciples of Mathematical Modeling Rating: 0 out of 5 stars0 ratingsAn Introduction to Mathematical Modeling Rating: 5 out of 5 stars5/5Multivariable Calculus, Linear Algebra, and Differential Equations Rating: 4 out of 5 stars4/5Calculus Refresher Rating: 3 out of 5 stars3/5Elementary Linear Programming with Applications Rating: 4 out of 5 stars4/5Introduction to Engineering Plasticity: Fundamentals with Applications in Metal Forming, Limit Analysis and Energy Absorption Rating: 0 out of 5 stars0 ratingsWorkbook to Accompany Physics for Students of Science and Engineering Rating: 0 out of 5 stars0 ratingsProbability Theory: A Concise Course Rating: 4 out of 5 stars4/5Optimization Theory with Applications Rating: 4 out of 5 stars4/5Advanced Mathematics for Engineers and Scientists Rating: 4 out of 5 stars4/5Linear Algebra Problem Solver (REA) Rating: 4 out of 5 stars4/5Mathematical Formulas for Industrial and Mechanical Engineering Rating: 5 out of 5 stars5/5Mathematical Analysis and Proof Rating: 0 out of 5 stars0 ratingsUnderstanding Engineering Mathematics Rating: 3 out of 5 stars3/5Special Matrices and Their Applications in Numerical Mathematics: Second Edition Rating: 5 out of 5 stars5/5Calculus of One Variable Rating: 3 out of 5 stars3/5Modern Calculus and Analytic Geometry Rating: 4 out of 5 stars4/5Elementary Vectors: Pergamon International Library Rating: 5 out of 5 stars5/5Computational Nuclear Engineering and Radiological Science Using Python Rating: 0 out of 5 stars0 ratingsComplex Analysis Rating: 3 out of 5 stars3/5How to Solve Mathematical Problems Rating: 4 out of 5 stars4/5Matrices and Linear Algebra Rating: 4 out of 5 stars4/5Elementary Functions and Analytic Geometry Rating: 0 out of 5 stars0 ratingsAdvanced Theoretical Mechanics: A Course of Mathematics for Engineers and Scientists Rating: 0 out of 5 stars0 ratings
Mathematics For You
The Thirteen Books of the Elements, Vol. 1 Rating: 0 out of 5 stars0 ratingsThe Little Book of Mathematical Principles, Theories & Things Rating: 3 out of 5 stars3/5My Best Mathematical and Logic Puzzles Rating: 5 out of 5 stars5/5Standard Deviations: Flawed Assumptions, Tortured Data, and Other Ways to Lie with Statistics Rating: 4 out of 5 stars4/5Quantum Physics for Beginners Rating: 4 out of 5 stars4/5Basic Math & Pre-Algebra For Dummies Rating: 4 out of 5 stars4/5Mental Math Secrets - How To Be a Human Calculator Rating: 5 out of 5 stars5/5Algebra - The Very Basics Rating: 5 out of 5 stars5/5Calculus Made Easy Rating: 4 out of 5 stars4/5The Math Book: From Pythagoras to the 57th Dimension, 250 Milestones in the History of Mathematics Rating: 3 out of 5 stars3/5Alan Turing: The Enigma: The Book That Inspired the Film The Imitation Game - Updated Edition Rating: 4 out of 5 stars4/5Game Theory: A Simple Introduction Rating: 4 out of 5 stars4/5Flatland Rating: 4 out of 5 stars4/5The Everything Everyday Math Book: From Tipping to Taxes, All the Real-World, Everyday Math Skills You Need Rating: 5 out of 5 stars5/5The Everything Guide to Algebra: A Step-by-Step Guide to the Basics of Algebra - in Plain English! Rating: 4 out of 5 stars4/5The Math of Life and Death: 7 Mathematical Principles That Shape Our Lives Rating: 4 out of 5 stars4/5Geometry For Dummies Rating: 5 out of 5 stars5/5ACT Math & Science Prep: Includes 500+ Practice Questions Rating: 3 out of 5 stars3/5Real Estate by the Numbers: A Complete Reference Guide to Deal Analysis Rating: 0 out of 5 stars0 ratingsIs God a Mathematician? Rating: 4 out of 5 stars4/5Summary of The Black Swan: by Nassim Nicholas Taleb | Includes Analysis Rating: 5 out of 5 stars5/5Algebra I Workbook For Dummies Rating: 3 out of 5 stars3/5The Golden Ratio: The Divine Beauty of Mathematics Rating: 5 out of 5 stars5/5How Not To Be Wrong | Summary Rating: 5 out of 5 stars5/5
Related categories
Reviews for Mathematics in Science and Engineering
21 ratings0 reviews