This document provides the specifications for a 12V 500W switching mode power supply (SMPS) with IR2085 controller including an idle current of 0.3A with no load, input current of 37A at 500W output, efficiency between 85-92% at 500W, and dimensions of 3" width x 5.3" length x 1.5" height.
This document provides the specifications for a 12V 500W switching mode power supply (SMPS) with IR2085 controller including an idle current of 0.3A with no load, input current of 37A at 500W output, efficiency between 85-92% at 500W, and dimensions of 3" width x 5.3" length x 1.5" height.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online from Scribd
This document provides the specifications for a 12V 500W switching mode power supply (SMPS) with IR2085 controller including an idle current of 0.3A with no load, input current of 37A at 500W output, efficiency between 85-92% at 500W, and dimensions of 3" width x 5.3" length x 1.5" height.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online from Scribd
Product Specifications All specs are at 14.4V Idle current with no load ACC Remote ON/OFF Level ACC Remote input impedance Turn ON delay In-Rush Current Idle current with no load Output voltage Regulation Output Current per supply Input current at 500W outputs Efficiency at 500W Isolation between Battery and Outputs Gnd Battery OVP Battery UVP Battery SCP Outputs OVP Indicators Size 0.3A +/- 10% 4.5-6V 10k+/- 10% 1-1.5 Sec 30A Max 0.3A +/- 35V +/-10% Non Regulated 7A 37A 85-92% 1k Ohm 18-18.5V 8.0-8.5V 80A 40-45V Red LED= SCP, Blue LED= OK 3 W x 5.3 Lx 1.5 H