Professional Documents
Culture Documents
2008 | ADDENDUM 2: NOVEMBER 2009 | EFFECTIVE DATE: MAY 1, 2010 haseebahm@gmail.com DEVELOPED AND DISTRIBUTED BY: HASEEB AHMED | ISSUE DATE: 6th SEPTEMBER, 2011 | FOR COMMENTS / SUGGESTIONS PLEASE CONTACT AT
48.5 m 11.5 m
Plates in Length of Total Height of Shell Thickness Shell Vertical RT Course (m) (mm) Course Joints (m) Spots
0 0 0 0 4 13 2 9 8
0 0 0 0 0 8 8 19 30
0 0 0 0 1 2 1 9 Full
0 0 0 0 0 8 8
9th Shell 8th Shell 7th Shell 6th Shell 5th Shell 4th Shell 3rd Shell
Plates in Shell Course 8 Full Joints LEGEND A One random spot per 30m of vertical joint welding. 1 One T joint to be taken on the higher thickness side. 2 Two T joints to be taken. 3 Total three spots to be taken as follows: a. One T joint to be taken on the lowest course and b. Two random spots shall be taken, one of which is as close to the bottom as possible.
3 152.387 457.161 9
Nos. m m Nos.
SPOTS TO BE CONSIDERED TOTAL SPOTS TO BE CONSIDERED Precentage Contigency for Repairs/Reshoots TOTAL SPOTS TO BE CONSIDERED APPROXIMATE NUMBER OF RT CREW VISITS
Full Joints
5 Visits
(@ 9 Spots/Visit)