Professional Documents
Culture Documents
SECTION
CONTENTS
POWER SUPPLY ROUTING CIRCUIT ................. ..... 3 Schematic ........................................................... ..... 3 Wiring Diagram POWER ............................ ..... 5 BATTERY POWER SUPPLY IGNITION SW. IN ANY POSITION ........................................... ..... 5 ACCESSORY POWER SUPPLY IGNITION SW. IN ACC OR ON ......................................... ..... 9 IGNITION POWER SUPPLY IGNITION SW. IN ON ............................................................... ... 10 IGNITION POWER SUPPLY IGNITION SW. IN ON AND/OR START .................................... ....11 IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM) ................................... ... 14 System Description ............................................. ... 14 SYSTEMS CONTROLLED BY IPDM E/R ........ ... 14 CAN COMMUNICATION LINE CONTROL ...... ... 14 IPDM E/R STATUS CONTROL ........................ ... 14 CAN Communication System Description ........... ... 15 FOR TCS MODELS ......................................... ... 15 FOR A/T MODELS ........................................... ... 16 FOR M/T MODELS .......................................... ... 18 Function of Detecting Ignition Relay Malfunction ... 19 Auto Active Test .................................................. ... 19 DESCRIPTION ................................................. ... 19 OPERATION PROCEDURE ............................ ... 19 INSPECTION IN AUTO ACTIVE TEST MODE ... 20 Schematic ........................................................... ... 22 IPDM E/R FUSE AND RELAY ARRANGEMENT ... 23 IPDM E/R TERMINAL ARRANGEMENT ......... ... 23 IPDM E/R Power/Ground Circuit Inspection ....... ... 23 Removal and Installation of IPDM E/R ................ ... 24 GROUND CIRCUIT ................................................ ... 26 Ground Distribution ............................................. ... 26 MAIN HARNESS .............................................. ... 26 ENGINE ROOM HARNESS ............................. ... 28 ENGINE CONTROL HARNESS (QR25DE) ..... ... 30 ENGINE CONTROL HARNESS (VQ35DE) ..... ... 32 BODY HARNESS ............................................. ... 34 BODY NO. 2 HARNESS .................................. ... 35 HARNESS .............................................................. ... 37 Harness Layout ................................................... ... 37 HOW TO READ HARNESS LAYOUT .............. ... 37 OUTLINE .......................................................... ... 38 MAIN HARNESS .............................................. ... 39 ENGINE ROOM HARNESS (LH VIEW) ........... ... 41 ENGINE ROOM HARNESS (RH VIEW) .......... ... 44 ENGINE CONTROL HARNESS (QR25DE) ..... ... 46 ENGINE CONTROL HARNESS (VQ35DE) ..... ... 48 BODY HARNESS ............................................. ... 50 BODY NO. 2 HARNESS .................................. ... 52 ROOM LAMP HARNESS ................................. ... 54 FRONT DOOR LH HARNESS ......................... ... 55 FRONT DOOR RH HARNESS ......................... ... 55 REAR DOOR LH HARNESS ............................ ... 56 REAR DOOR RH HARNESS ........................... ... 56 Wiring Diagram Codes (Cell Codes) ................... ... 57 ELECTRICAL UNITS LOCATION ......................... ... 60 Electrical Units Location ...................................... ... 60 ENGINE COMPARTMENT ............................... ... 60 PASSENGER COMPARTMENT ...................... ... 61 Fuse ..................................................................... ... 63 Fusible Link ......................................................... ... 63 Circuit Breaker (Built Into BCM) .......................... ... 63 HARNESS CONNECTOR ...................................... ... 64 Description ........................................................... ... 64 HARNESS CONNECTOR (TAB-LOCKING TYPE) ............................................................... ... 64 HARNESS CONNECTOR (SLIDE-LOCKING TYPE) ............................................................... ... 65 HARNESS CONNECTOR (DIRECT-CONNECT SRS COMPONENT TYPE) .............................. ... 66 JOINT CONNECTOR (J/C) .................................... ... 67 Terminal Arrangement ......................................... ... 67 ELECTRICAL UNITS ............................................. ... 68 Terminal Arrangement ......................................... ... 68 STANDARDIZED RELAY ....................................... ... 69 Description ........................................................... ... 69 NORMAL OPEN, NORMAL CLOSED AND MIXED TYPE RELAYS ..................................... ... 69 TYPE OF STANDARDIZED RELAYS .............. ... 69
PG
PG-1
2003 Altima
FUSE AND FUSIBLE LINK BOX ........................... ...72 Terminal Arrangement .......................................... ...72
PG-2
2003 Altima
A
EKS003J6
PG
WKWA0093E
PG-3
2003 Altima
WKWA0094E
PG-4
2003 Altima
PG
WKWA0262E
PG-5
2003 Altima
WKWA0263E
PG-6
2003 Altima
PG
WKWA0264E
PG-7
2003 Altima
WKWA0265E
PG-8
2003 Altima
PG
WKWA0266E
PG-9
2003 Altima
WKWA0089E
PG-10
2003 Altima
PG
WKWA0267E
PG-11
2003 Altima
WKWA0268E
PG-12
2003 Altima
PG
WKWA0269E
PG-13
2003 Altima
IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM) IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)
PFP:284B7
System Description
q
EKS003J8
IPDM E/R (Intelligent Power Distribution Module Engine Room) integrates the relay box and fuse block which were originally placed in engine compartment. It controls integrated relay via IPDM E/R control circuit. q IPDM E/R-integrated control circuit performs ON-OFF operation of relay, CAN communication control, oil pressure switch signal reception, etc. q It controls operation of each electrical part via BCM and CAN communication lines. CAUTION: All IPDM E/R-integrated relays cannot be removed.
PG-14
2003 Altima
2.
3.
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads required data only.
LKIA0015E
PG
BCM ABS/TCS control unit R IPDM E/R
PG-15
2003 Altima
Signals Low beam status High beam request High beam status Front fog lights request Front fog light status OD cancel switch signal Brake switch signal
ECM R
TCM
BCM R
IPDM E/R T R T R T R
R R
T R T R
R R R
T T T T R R T T R
Vehicle speed signal Oil pressure switch Sleep request1 Sleep request2 N range switch signal P range switch signal Seat belt buckle switch signal Door switch signal Tail lamp request Turn indicator signal Buzzer output signal Trunk switch signal ASCD main switch signal ASCD cruise signal Wiper operation Wiper stop position signal Rear window defogger switch signal Rear window defogger control signal
R R
T T T R R R R R R T T T T T R R
T T
R R R R T T T R T
LKIA0017E
PG-16
2003 Altima
PG
PG-17
2003 Altima
LKIA0018E
PG-18
2003 Altima
When contact point of integrated ignition relay is stuck and cannot be turned OFF, IPDM E/R turns ON tail and parking lamps for 10 minutes to indicate IPDM E/R malfunction.
EKS003JB
In auto active test mode, operation inspection can be performed when IPDM E/R sends a drive signal to the following systems: Rear window defogger Front wipers Tail and parking lamps Front fog lamps Headlamps (Hi, Lo) A/C compressor (magnet clutch) Cooling fan
OPERATION PROCEDURE
1. Close hood and lift wiper arms away from windshield (to prevent glass damage by wiper operation). H NOTE: When auto active test is performed with hood opened, sprinkle water on windshield beforehand. Turn ignition switch OFF. I Within 20 seconds, turn the ignition switch ON and press the front door switch LH ten times, then turn the ignition switch OFF. CAUTION: J Close front door RH. Turn ignition switch ON. When auto active test mode is actuated, horn chirps once, and oil pressure warning lamp starts blinking. PG After a series of operations is repeated three times, auto active test is completed. NOTE: When auto active test mode has to be cancelled halfway, turn ignition switch OFF. L CAUTION: Be sure to inspect DI-37, "Oil Pressure Warning Lamp Stays Off (Ignition Switch ON)" and BL-28, "Door Switch Check" when the auto active test cannot be performed. M
2. 3.
4. 5. 6.
PG-19
2003 Altima
When auto active test mode is actuated, the following seven steps are repeated three times.
WKIA1010E
Symptom Any of front wipers, tail and parking lamps, front fog lamps, and headlamps (Hi, Lo) do not operate.
Inspection contents OK Perform auto active test. Does system in question operate?
q q
Possible cause BCM signal input system Lamp/motor malfunction Lamp/motor ground system malfunction Harness/connector malfunction between IPDM E/R and system in question IPDM E/R (integrated relay) malfunction BCM signal input system Rear window defogger relay system Open circuit of rear window defogger IPDM E/R malfunction BCM signal input system CAN communication signal between BCM and ECM. CAN communication signal between ECM and IPDM E/R BCM ECM Magnet clutch malfunction Harness/connector malfunction between IPDM E/R and magnet clutch IPDM E/R (integrated relay) malfunction ECM signal input system CAN communication signal between ECM and IPDM E/R ECM Cooling fan motor malfunction Harness/connector malfunction between IPDM E/R and cooling fan motor IPDM E/R (integrated relay) malfunction
NG
q q q
OK
q q
NG
q q q q
OK A/C compressor does not operate. Perform auto active test. Does magnet clutch operate? NG
q q q q q q q
OK Cooling fan does not operate. Perform auto active test. Does cooling fan operate? NG
q q q q q
PG-20
2003 Altima
Possible cause Harness/connector malfunction between IPDM E/R and oil pressure switch Oil pressure switch malfunction CAN communication signal between IPDM E/R and combination meter Combination meter
NG
PG
PG-21
2003 Altima
WKWA0514E
PG-22
2003 Altima
F
WKIA0173E
PG
M
WKIA0116E
EKS003JD
Check that the following fusible links or IPDM E/R fuses are not blown.
Terminal No. 1, 2 Signal name Battery power Ignition power Fuse, fusible link No. F/Lb, F/Ld, Fuse No. 40 Fuse No. 33
PG-23
2003 Altima
WKIA0118E
OK or NG? OK >> Normal. NG >> Replace ground circuit harness of IPDM E/R.
WKIA0119E
EKS003JE
WKIA0120E
4.
WKIA0121E
PG-24
2003 Altima
C
WKIA0122E
PG
PG-25
2003 Altima
WKIA0222E
PG-26
2003 Altima
GROUND CIRCUIT
PG
WKIA0221E
PG-27
2003 Altima
GROUND CIRCUIT
ENGINE ROOM HARNESS
WKIA1044E
PG-28
2003 Altima
GROUND CIRCUIT
PG
WKIA0223E
PG-29
2003 Altima
GROUND CIRCUIT
ENGINE CONTROL HARNESS (QR25DE)
WKIA0224E
PG-30
2003 Altima
GROUND CIRCUIT
PG
WKIA0085E
PG-31
2003 Altima
GROUND CIRCUIT
ENGINE CONTROL HARNESS (VQ35DE)
WKIA0225E
PG-32
2003 Altima
GROUND CIRCUIT
PG
WKIA0226E
PG-33
2003 Altima
GROUND CIRCUIT
BODY HARNESS
WKIA0227E
PG-34
2003 Altima
GROUND CIRCUIT
BODY NO. 2 HARNESS
A
PG
WKIA0089E
PG-35
2003 Altima
GROUND CIRCUIT
WKIA0090E
PG-36
2003 Altima
A
EKS003JG
SEL252V
CONNECTOR SYMBOL
Main symbols of connector (in Harness Layout) are indicated below.
Connector type Male
q q q
J
q
PG
q
PG-37
2003 Altima
HARNESS
OUTLINE
WKIA1005E
PG-38
2003 Altima
HARNESS
MAIN HARNESS
A
PG
WKIA0097E
PG-39
2003 Altima
HARNESS
WKIA1006E
PG-40
2003 Altima
HARNESS
ENGINE ROOM HARNESS (LH VIEW)
A
PG
WKIA0291E
Refer to PG-44, "Engine Room Harness (RH View)" for continuation of engine room harness.
PG-41
2003 Altima
HARNESS
WKIA1043E
PG-42
2003 Altima
HARNESS
Passenger Compartment
A
PG
WKIA0101E
PG-43
2003 Altima
HARNESS
ENGINE ROOM HARNESS (RH VIEW)
WKIA0292E
Refer to PG-41, "Engine Room Harness (LH View)" for continuation of engine room harness.
PG-44
2003 Altima
HARNESS
PG
WKIA0230E
PG-45
2003 Altima
HARNESS
ENGINE CONTROL HARNESS (QR25DE)
WKIA0112E
PG-46
2003 Altima
HARNESS
PG
WKIA0113E
PG-47
2003 Altima
HARNESS
ENGINE CONTROL HARNESS (VQ35DE)
WKIA0114E
PG-48
2003 Altima
HARNESS
PG
WKIA0115E
PG-49
2003 Altima
HARNESS
BODY HARNESS
WKIA1007E
PG-50
2003 Altima
HARNESS
PG
WKIA1008E
PG-51
2003 Altima
HARNESS
BODY NO. 2 HARNESS
WKIA0104E
PG-52
2003 Altima
HARNESS
PG
WKIA1009E
PG-53
2003 Altima
HARNESS
ROOM LAMP HARNESS
WKIA0092E
PG-54
2003 Altima
HARNESS
FRONT DOOR LH HARNESS
A
WKIA0093E
PG
WKIA0094E
PG-55
2003 Altima
HARNESS
REAR DOOR LH HARNESS
WKIA0095E
WKIA0096E
PG-56
2003 Altima
Use the chart below to find out what each wiring diagram code stands for. Refer to the wiring diagram code in the alphabetical index to find the location (page number) of each wiring diagram.
Code 1STSIG 2NDSIG 3RDSIG 4THSIG A/C,A A/C,M A/LIGHT ABS APPS1 APPS2 APPS3 ASCBOF ASC/BS ASCIND ASC/SW AT/IND AUDIO B/COMP BAF/TS BACK/L BRK/SW BYPS/V CAN CAN CAN CHARGE CHIME CIGAR COOL/F D/LOCK DEF DLC DTRL ECM/PW ECTS ENGSS EMNT ETC1 ETC2 ETC3 F/FOG F/PUMP FLS1 FLS2 FLS3 FTS FTTS Section AT AT AT AT ATC MTC LT BRC EC EC EC EC EC EC EC DI AV DI AT LT EC EC AT EC LAN SC DI WW EC BL GW EC LT EC EC AT EC EC EC EC LT EC EC EC EC AT EC A/T 1st Signal A/T 2nd Signal A/T 3rd Signal A/T 4th Signal Auto Air Conditioner Manual Air Conditioner Auto Light Control Anti-Lock Brake System Accelerator Pedal Position Sensor Accelerator Pedal Position Sensor Accelerator Pedal Position Sensor ASCD Brake Switch ASCD Brake Switch ASCD Indicator ASCD Steering Switch A/T Indicator Lamp Audio Board Computer A/T Fluid Temperature Sensor and TCM Power Supply Back-up Lamp Brake Switch Vacuum Cut Valve Bypass Valve CAN Communication Line CAN Communication Line CAN System Charging System Warning Chime Cigarette Lighter Cooling Fan Control Power Door Lock Rear Window Defogger Data Link Connector Headlamp - With Daytime Light System ECM Power Supply for Back-Up Engine Coolant Temperature Sensor Engine Speed Signal Engine Mount Electric Throttle Control Function Throttle Control Motor Relay Throttle Control Motor Front Fog Lamp Fuel Pump Fuel Level Sensor Function (SLOSH) Fuel Level Sensor Circuit Fuel Level Sensor Circuit (Ground Signal) A/T Fluid Temperature Sensor Fuel Tank Temperature Sensor Wiring Diagram Name
PG
PG-57
2003 Altima
HARNESS
FUEL FUELB1 FUELB2 H/LAMP H/MIRR HEATER HO2S1 HO2S1H HO2S2 HO2S2H HORN HSEAT I/MIRR IATS IGNSYS ILL INJECT INT/L IVC IVCB1 IVCB2 IVCSB1 IVCSB2 KEYLES KS LPSV MAFS MAIN MAIN METER MIL MIRROR NATS NONDTC O2H1B1 O2H1B2 O2H2B1 O2H2B2 O2S1B1 O2S1B2 O2S2B1 O2S2B2 OVRCSV PGC/V PHASE PHSB1 PHSB2 PNP/SW PNP/SW POS POWER PRE/SE EC EC EC LT GW MTC EC EC EC EC WW SE GW EC EC LT EC LT EC EC EC EC EC BL EC AT EC AT EC DI EC GW BL AT EC EC EC EC EC EC EC EC AT EC EC EC EC AT EC EC PG EC Fuel Injection System Function Fuel Injection System Function (Bank 1) Fuel Injection System Function (Bank 2) Headlamp Door Mirror with Heated Mirror Heater System Heated Oxygen Sensor 1 (Front) Heated Oxygen Sensor 1 (Front) Heater Heated Oxygen Sensor 2 (Rear) Heated Oxygen Sensor 2 (Rear) Heater Horn Heated Seat Inside Mirror (Auto-Anti Dazzling Mirror) Intake Air Temperature Sensor Ignition System Illumination Injector Spot, Vanity Mirror and Trunk Room Lamps Intake Valve Timing Control Solenoid Valve Intake Valve Timing Control Solenoid Valve Bank 1 Intake Valve Timing Control Solenoid Valve Bank 2 Intake Valve Timing Control Position Sensor Bank 1 Intake Valve Timing Control Position Sensor Bank 2 Remote Keyless Entry System Knock Sensor Line Pressure Solenoid Valve Mass Air Flow Sensor Main Power Supply and Ground Circuit Main Power Supply and Ground Circuit Speedometer, Tachometer, Temp., Oil and Fuel Gauges Malfunction Indicator Lamp Door Mirror Nissan Anti-Theft System Non-detective Items Heated Oxygen Sensor 1(Front) Heater Bank 1 Heated Oxygen Sensor 1 (Front) Heater Bank 2 Rear Heated Oxygen Sensor 2 (Rear) Heater Bank 1 Rear Heated Oxygen Sensor 2 (Rear) Heater Bank 2 Heated Oxygen Sensor 1 (Front) Bank 1 Heated Oxygen Sensor 1 (Front) Bank 2 Heated Oxygen Sensor 2 (Rear) Bank 1 Heated Oxygen Sensor 2 (Rear) Bank 2 Over Run Clutch Solenoid Valve EVAP Canister Purge Volume Control Solenoid Valve Camshaft Position Sensor (PHASE) Camshaft Position Sensor (PHASE) (Bank 1) Camshaft Position Sensor (PHASE) (Bank 2) Park/Neutral Position Switch Park/Neutral Position Switch Crankshaft Position Sensor (CKPS) (POS) Power Supply Routing EVAP Control System Pressure Sensor
PG-58
2003 Altima
HARNESS
PS/SEN PST/SW REMOTE ROOM/L RP/SEN S/SIG SEAT SEN/PW SHIFT SROOF SRS SSV/A SSV/B START STEP/L STOP/L TLID TAIL/L TCCSIG TCS TCV TPS TPS1 TPS2 TPS3 TRNSCV TRSA/T TURN VEHSEC VENT/V VIAS VIAS/V VSSA/T VSSMTR W/ANT WARN WINDOW WIPER EC EC AV LT EC EC SE EC AT RF SRS AT AT SC LT LT BL LT AT BRC AT AT EC EC EC BL AT LT BL EC EC EC AT AT AV DI GW WW Power Steering Oil Pressure Sensor Power Steering Oil Pressure Switch Audio (Remote Control Switch) Interior Room Lamp Refrigerant Pressure Sensor Start Signal Power Seat Sensor Power Supply A/T Shift Lock System Sunroof Supplemental Restraint System Shift Solenoid Valve A Shift Solenoid Valve B Starting System Step Lamp Stop Lamp Trunk Lid Opener Parking, License and Tail Lamps A/T TCC Signal (Lock Up) Traction Control System Torque Converter Clutch Solenoid Valve Throttle Position Sensor Throttle Position Sensor Throttle Position Sensor Throttle Position Sensor HOMELINK Universal Transceiver Turbine Revolution Sensor Turn Signal and Hazard Warning Lamps Vehicle Security System EVAP Canister Vent Control Valve Variable Air Induction Control System Variable Air Induction Control System Valve Vehicle Speed Sensor A/T (Revolution Sensor) Vehicle Speed Sensor Meter Audio Antenna Warning Lamps Power Window Front Wiper and Washer
PG
PG-59
2003 Altima
WKIA0124E
PG-60
2003 Altima
PG
WKIA0125E
PG-61
2003 Altima
WKIA0131E
PG-62
2003 Altima
If fuse is blown, be sure to eliminate cause of incident before installing new fuse. Use fuse of specified rating. Never use fuse of more than specified rating. Do not partially install fuse; always insert it into fuse holder properly. Remove fuse for ELECTRICAL PARTS (BAT) if vehicle is not used for a long period of time.
CEL083
Fusible Link
A melted fusible link can be detected either by visual inspection or by feeling with finger tip. If its condition is questionable, use circuit tester or test lamp. CAUTION: q If fusible link should melt, it is possible that critical circuit (power supply or large current carrying circuit) is shorted. In such a case, carefully check and eliminate cause of incident. q Never wrap outside of fusible link with vinyl tape. Important: Never let fusible link touch any other wiring harness, vinyl or rubber parts.
EKS003JK
H
WKIA0123E
EKS003JL
PG
L
SBF284E
PG-63
2003 Altima
PFP:B4341
EKS003JM
SEL769DA
PG-64
2003 Altima
HARNESS CONNECTOR
HARNESS CONNECTOR (SLIDE-LOCKING TYPE)
A new style slide-locking type connector is used on certain systems and components, especially those related to OBD. q The slide-locking type connectors help prevent incomplete locking and accidental looseness or disconnection. q The slide-locking type connectors are disconnected by pushing or pulling the slider. Refer to the illustration below. CAUTION: q Do not pull the harness or wires when disconnecting the connector. q Be careful not to damage the connector support bracket when disconnecting the connector. [Example]
q
PG
M
AEL299C
PG-65
2003 Altima
HARNESS CONNECTOR
HARNESS CONNECTOR (DIRECT-CONNECT SRS COMPONENT TYPE)
SRS direct-connect type harness connectors are used on certain SRS components such as air bag modules and seat belt pre-tensioners. q Always pull up to release black locking tab prior to removing connector from SRS component. q Always push down to lock black locking tab after installing connector to SRS component. When locked, the black locking tab is level with the connector housing. CAUTION: q Do not pull the harness or wires when removing connectors from SRS components.
q
WHIA0103E
PG-66
2003 Altima
A
EKS003JN
PG
WKIA0126E
PG-67
2003 Altima
WKIA0127E
PG-68
2003 Altima
A
EKS003JQ
SEL881H
PG
SEL882H
1M 1T
1 Make 1 Transfer
2M 1M1B
PG-69
2003 Altima
STANDARDIZED RELAY
LEL638
PG-70
2003 Altima
A
EKS003JR
PG
WKIA1748E
PG-71
2003 Altima
FUSE AND FUSIBLE LINK BOX FUSE AND FUSIBLE LINK BOX Terminal Arrangement
PFP:24381
EKS003JS
WKIA0130E
PG-72
2003 Altima