You are on page 1of 1

What is the difference between Cat 5e UTP, STP and FTP cables?

Which one of the above cables would be more suitable for a network of 20 PC's all of them with
an ethernet card 10/100. All are connected to a switch and a broadband router.

Normally, UTP (unshielded twisted pair) Cat5e is sufficient for 100/1000 Mbps ethernet.

The other two have added shielding to provide some protection against electro-magnetic
interference.

In order of protection, STP (shielded twisted pair) is the best, followed by FTP (foil twisted pair),
and then UTP.

Unless you have some special circumstance, UTP is all you need. The shielded cable is more
complicated to use and install. If the shield is not properly grounded, for example, it does no
good.

You might also like