Professional Documents
Culture Documents
Bi-CMOS IC
LV762XXX Series
Overview
Built-in CTV Microcontroller Video and Sound Processing ICs (VIF/SIF/Y/C/Deflection/CbCr IN)
The LV762XXX series is a single-chip video and sound processor IC with a built-in microcontroller that supports all of the NTSC, PAL and SECAM broadcasting systems. The IC provides fully integrated solution to rationalize the design of color TV sets, increase productivity, and reduce total costs.
Functions
I2C bus control system with a built-in microcontroller VIF/SIF/Y/C/Deflection/CbCr IN Adjustment-free VIF/SIF 1Xtal multi-system that supports NTSC, PAL and SECAM broadcasting systems No VCO coil required Internal sound carrier BPF, 4-system sound carrier trap Digital AFT system
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment.
52009 MS No.A1447-1/6
LV762XXX Series
Lineup
Type No. LV762102F LV762102C LV762113F LV762113C LV762133F LV762133C LV762213F LV762213C LV762232F LV762232C LV762233F LV762233C LV76233N5F SECAM Tone/Surround E/W Teletext ROM Flash 64K(P:48K,GC:16K) MASK 64K(P:48K,GC:16K) Flash 128K(P:96K,GC:32K) MASK 128K(P:96K,GC:32K) Flash 128K(P:96K,GC:32K) MASK 128K(P:96K,GC:32K) Flash 128K(P:96K,GC:32K) MASK 128K(P:96K,GC:32K) Flash 64K(P:48K,GC:16K) MASK 64K(P:48K,GC:16K) Flash 128K(P:96K,GC:32K) MASK 128K(P:96K,GC:32K) Flash 192K(P:140K,GC:52K)
Specifications
Maximum Ratings (BIP Chip) at Ta = 25C
Parameter Maximum supply voltage Symbol V62 max V4 max Maximum supply current I9 max I20 max I49 max Allowable power dissipation Operating temperature Storage temperature Pd max Topr Tstg Ta 65C * Conditions Ratings 6.0 6.0 15 20 26.5 1.3 -10 to +65 -55 to +150 Unit V V mA mA mA W C C
No.A1447-2/6
LV762XXX Series
Operating Conditions (BIP Chip) at Ta = 25C
Parameter Recommended supply voltage Symbol V62 V4 Recommended supply current I9 I20 I49 Operating supply voltage range V62 V4 Operating supply current range I9 I20 I49 Conditions Ratings 5.0 5.0 11 13 22 4.7 to 5.3 4.7 to 5.3 9 to 13 11 to 15 20.5 to 26.5 Unit V V mA mA mA V V mA mA mA
(Note) FLASH-ROM erase/write temperature range : Ta = 252C (VDD = 4.5 to 5.5V) (*1) Relational expression between tCYC and oscillation frequency ; 1/1 frequency dividing : 3/FmVCO1, 1/2 frequency dividing : 6/FVCO1. (*2) OCKSEL is the selectable register for OSD clock frequency. (See the LC873200 users manual for details.)
No.A1447-3/6
LV762XXX Series
Package Dimensions
unit : mm (typ) 3300
57.2
64
33
0.95
5.1max
0.51min
3.8
(4.25)
1.78 (1.01)
0.5
SANYO : DIP64S(600mil)
0.2
32
15.24
13.8
No.A1447-4/6
1M
+ +
100F 0.01F 12k
Block Diagram
100
1 F
ADC HOR VCO 1/256 COLOR CLAMP DC REST OSD CONTRAST BRIGHT RGB MATRIX AFC1 HOR C/D SYNC SEP
P15/SCK10 0.01F
EXT-L EXT-R IN IN
+ +
P13/TVPWMD 100F 100F 0.01F (M) 0.1F 0.1F 0.1F 0.1F 0.1F 0.1F 0.1F 30k
P00/INT0/SO0
0.1F
0.1F
+ 22k
20k
+ CPU VDD2 26
C_SYNC HS VS PHASE SHIFTER AFC2 VER C/D CLMP SW FBP VER SEP TINT SW 1H DL BUS DC ADJ SW PAL SW DEMO VER RAMP FSC (EHT) VCO DDS APC2
0.01F FILT 25
32
HOR OUT APC1 VXO 1CHIP VDD HOR VCC (2 1) (2 3) E/W (22 ) (23 ) SECAM DECODER BPF ACC BS SG DL SHARP V/Y SW OSD CONTRAST 900K DET OSD SW EXT RGB SW BPF LIM AMP VCO V DET RESET DRIVE/OUT-OFF ABL ACL EXT RGB CONTRAST DRIVE OUT-OFF VIDEO DET BPF SPLL SOUND DET VIF AMP TRAP RF AGC
I/O PORT 1
TIMER 0
31
30
CLOCK CONTROL
29
BUS
28
PLL
OSD
27
24
23
22
21
20
19
18
17
16
15
14
13
12
10
CLMP
SW
VS
HS
CLOCK
VIDEO SW
DATA
(2 2) (2 3) TONE
VDD3
CPU CLOCK
DC VOL YC SW
XTSEL
RAM
ROM
BASE TIMER
CPU CORE
FS
TRAP
G FM DET FMAMP
RESET
LV762XXX Series
I/O PORT 0
AFT
RST
PED_IN
CVBS
SW
VDD5
34 P12
B OUT G OUT R OUT
35
36
37
38
39
40
10H 100pF
3300pF
10k 0.47F
P17/SCK11
P04/AN4
P05/AN5
0.33F P07/AN7/XT1
P06/AN6/XT2
560 0.47F
0.47F(M)
P03/INT3 IRDA
RES
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
0.022F
0.022F
100F
100F
0.01F
SAW FIL
5.6H
P16/SO1/SI11, SB11/T1PWML
P11
AUDIO L OUT
AUDIO R OUT
68pF 33pF
IF IN
RF AGC
39
RGB VCC (9.0V)
33pF
VCC : 5V IF
FM OUT (MONI-L)
No.A1447-5/6
LV762XXX Series
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above.
This catalog provides information as of May, 2009. Specifications and information herein are subject to change without notice. PS No.A1447-6/6