Professional Documents
Culture Documents
>>User password:
UA5000>enable
UA5000#config
// add frame (MAIN_HABM_30(HABA)) for
indoor, MAIN_HAFM_30(HABD) for outdoor
UA5000(config)#frame add 0
FrameType:
0 : MAIN_HABM_30(HABA)
1 : MAIN_HAFM_30(HABD)
2 : MAIN_HAFM_6(HABL)
3 : MAIN_H602HABD(HABD)
4 : MAIN_H601HABC(HABC)
5 : MAIN_H601HABO(HABO)
6 : MAIN_H601HABM(HABM)
7 : SLAVE_HAFS_32(HABE)
8 : SLAVE_HABS_32(HABB)
9 : SLAVE_HABS_30(HABA)
10 : SLAVE_HAFS_30(HABD)
11 : SLAVE_H602HABD(HABD)
12 : SLAVE_H602HABE(HABE)
13 : RSU_HAFS_30(HABD)
14 : RSU_HABS_30(HABA)
15 : RSU_HAFS_12(HABC)
16 : RSU_HAFS_6(HABL)
17 : RSUG_ONU60A(HUBO)
18 : RSUG_ONU04A
19 : RSUG_ONU08A
20 : RSP_19(HCB)
21 : RSP_15(HDB)
22 : RSP_14(HIB)
23 : RSP_12(HFB)
24 : RSP_10(HGB)
25 : RSP_6A(HMB)
26 : RSP_6B(HLB)
27 : UAM_R (HUBM)
28 : UAS_R (HUBS)
29 : UAFM_R(HUBE)
30 : UAFS_R(HUBF)
31 : UAMB_R(HUBB)
32 : ONU60A_R(HUBO)
33 : ONUF01D100_R(HUBL)
34 : VRSP_12(HABA)
35 : VRSP_18(HABA)
36 : HWTA(HIB_1)
37 : HWTA(HIB_2)
38 : HWTA(HIB_3)
// add frame (MAIN_HABM_30(HA
BA))
Please select frame type (0 ~ 38):0
UA5000(config)#frame add 1
// if have,add frame (SLAVE_HABS
_30(HABA)) for indoor if we have, for outdoor need to check the real frame type
FrameType:
0 : MAIN_HABM_30(HABA)
2 : MAIN_HAFM_6(HABL)
4 : MAIN_H601HABC(HABC)
6 : MAIN_H601HABM(HABM)
8 : SLAVE_HABS_32(HABB)
10 : SLAVE_HAFS_30(HABD)
12 : SLAVE_H602HABE(HABE)
14 : RSU_HABS_30(HABA)
16 : RSU_HAFS_6(HABL)
18 : RSUG_ONU04A
20 : RSP_19(HCB)
22 : RSP_14(HIB)
24 : RSP_10(HGB)
26 : RSP_6B(HLB)
28 : UAS_R (HUBS)
30 : UAFS_R(HUBF)
32 : ONU60A_R(HUBO)
34 : VRSP_12(HABA)
36 : HWTA(HIB_1)
38 : HWTA(HIB_3)
Please select frame type (0 ~ 38):9
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
MAIN_HAFM_30(HABD)
MAIN_H602HABD(HABD)
MAIN_H601HABO(HABO)
SLAVE_HAFS_32(HABE)
SLAVE_HABS_30(HABA)
SLAVE_H602HABD(HABD)
RSU_HAFS_30(HABD)
RSU_HAFS_12(HABC)
RSUG_ONU60A(HUBO)
RSUG_ONU08A
RSP_15(HDB)
RSP_12(HFB)
RSP_6A(HMB)
UAM_R (HUBM)
UAFM_R(HUBE)
UAMB_R(HUBB)
ONUF01D100_R(HUBL)
VRSP_18(HABA)
HWTA(HIB_2)
UA5000(config)#frame add 2
//if have,add frame (SLAVE_HABS_30(
HABA)) for indoor, for out door need to check the real frame type.
FrameType:
0 : MAIN_HABM_30(HABA)
2 : MAIN_HAFM_6(HABL)
4 : MAIN_H601HABC(HABC)
6 : MAIN_H601HABM(HABM)
8 : SLAVE_HABS_32(HABB)
10 : SLAVE_HAFS_30(HABD)
12 : SLAVE_H602HABE(HABE)
14 : RSU_HABS_30(HABA)
16 : RSU_HAFS_6(HABL)
18 : RSUG_ONU04A
20 : RSP_19(HCB)
22 : RSP_14(HIB)
24 : RSP_10(HGB)
26 : RSP_6B(HLB)
28 : UAS_R (HUBS)
30 : UAFS_R(HUBF)
32 : ONU60A_R(HUBO)
34 : VRSP_12(HABA)
36 : HWTA(HIB_1)
38 : HWTA(HIB_3)
Please select frame type (0 ~ 38):14
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
MAIN_HAFM_30(HABD)
MAIN_H602HABD(HABD)
MAIN_H601HABO(HABO)
SLAVE_HAFS_32(HABE)
SLAVE_HABS_30(HABA)
SLAVE_H602HABD(HABD)
RSU_HAFS_30(HABD)
RSU_HAFS_12(HABC)
RSUG_ONU60A(HUBO)
RSUG_ONU08A
RSP_15(HDB)
RSP_12(HFB)
RSP_6A(HMB)
UAM_R (HUBM)
UAFM_R(HUBE)
UAMB_R(HUBB)
ONUF01D100_R(HUBL)
VRSP_18(HABA)
HWTA(HIB_2)
UA5000(config)#frame connect
he same rack
{ upframeid<U><0,97> }:0
{ downframeid<U><0,97> }:1
Command:
frame connect 0 1
UA5000(config)#frame link
D and RSU frame acurdding to the
{ start<K> }:start
{ frameid/slotid/portid<S><1,15>
{ end<K> }:end
{ frameid/slotid/portid<S><1,15>
Command:
frame link start 0/4/0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
{ A32<K>|ASL<K>|ATI<K>|CDI<K>|CSM<K>|CSR<K>|DSL<K>|H301HWTA<K>|H601DSLD<K>|H601D
SLE<K>|H601EDTB<K>|H601EP1A<K>|H601GP1A<K>|H601PVMD<K>|H602PWX<K>|H602RSUG<K>|H6
11SDLE<K>|H612EDTB<K>|HSL<K>|PWX2<K>|PWX3<K>|PWXA<K>|RSP<K>|RSU4<K>|RSU8<K>|SDL<
K>|TSS<K>|VFB<K> }:tss
Command:
board add 0/17 tss
0 frame 17 slot board add successfully
//add TSS for frame 0
UA5000(config)#board confirm 0
e 0
-------
UA5000(config)#board confirm 0
// confirm board for frame
0, for the other frame just change frame ID and the real slot No.
UA5000(config)#display ip address
dy existing
Eth:
IPAddress............: 172.1 .1.20
SubMask..............: 255.255.255.0
GateWay..............:
MacIndex.............: 0
MacAddress...........: 00-18-82-B6-0C-3C
VlanID...............:
UA5000(config)#interface eth
de
UA5000(interface-eth)#ip modify
// Modify existing IP(Managment IP)if nec
essaries according to the IP PLAN
{ ip_address<I><X.X.X.X> }:172.1.1.20
{ gateway<K>|ip_address<K>|submask<K>|vlan_tag<K> }:ip_address
{ ip_address<I><X.X.X.X> }:10.1.16.145
{
{
{
{
{
<cr>|gateway<K>|submask<K>|vlan_tag<K> }:gateway
gateway<I><X.X.X.X> }:10.1.16.253
<cr>|submask<K>|vlan_tag<K> }:vlan_tag
vlan_tag<U><0,4095> }:4000
<cr>|submask<K> }:
Command:
255.255.255.0
10.1.16.253
0
00-18-82-B6-0C-3C
4000
UA5000(interface-eth)#quit
0
1
2
3
120
120
120
120
UA5000(config)#interface v5 120
intrface mode
// add V5 ID or inter to V5
// add link
{ frameid/slotid/portid<S><1,15> }:0/4/0
{ linkid<U><0,255> }:0
Command:
link add 0/4/0 0
UA5000(config-if-v5-120)#link add 0/5/0 1
UA5000(config-if-v5-120)#link add 0/4/1 2
UA5000(config-if-v5-120)#link add 0/5/1 3
UA5000(config-if-v5-120)#c-channel add 0/4/0
// add c- channel for acti
ve link
{ tsno<K> }:tsno 16
{ type<E><1:protc1_act,2:protc1_std,3:protc2_act,4:protc2_std> }:1:protc1_act
{ <cr>|logiccid<U><0,65534> }:0
Command:
c-channel add 0/4/0 tsno 16 1:protc1_act 0
UA5000(config-if-v5-120)#c-channel add 0/5/0
{ tsno<K> }:tsno
// add c- channel for stunb
y link
{ tsno<E><15,16,31> }:16
{ type<E><1:protc1_act,2:protc1_std,3:protc2_act,4:protc2_std> }:2:protc1_std
{ <cr>|logiccid<U><0,65534> }:
Command:
c-channel add 0/5/0 tsno 16 2:protc1_std
UA5000(config-if-v5-120)#reset
UA5000(config)#interface h248 0
// inter to h248 mode with h248 id 0
(to conect with NGN)
UA5000(config-if-h248-0)#if-h248 attribute mgip 10.1.20.65 mgport 2944 mg
-media-ip 10.1.13.65 transfer udp mgcip_1 192.168.2.2 mgcport_1 2944 domainName
SANB
{ 2833encrypt<K>|<cr>|code<K>|desc<K>|deviceName<K>|heartBeatGenTimer<K>|heartBe
atRetransTimer<K>|heartBeatRetransTimes<K>|mgc-domain-name1<K>|mgc-domain-name2<
K>|mgcip_2<K>|mgcport_2<K>|MIDType<K>|profile-index<K>|profile-negotiation<K>|st
art-negotiate-version<K> }:
Command:
if-h248 attribute mgip 10.1.20.65 mgport 2944 mg-media-ip 10.1.13.65
transfer udp mgcip_1 192.168.2.2 mgcport_1 2944 domainName SANB // add h248 bet
ween UA5K and softSwitch example
UA5000(config-if-h248-0)#reset coldstart
Are you sure to reset MG interface?(y/n)[n]:y
UA5000(config-if-h248-0)#quit
// reset h248
UA5000(config)#esl user
// inter to esl user to add
users
UA5000(config-esl-user)# mgpstnuser batadd 1/6/0 1/6/2 0
// add batch users
frame/slot/port
{ <cr>|priority<K>|step<K>|telno<K>|terminalid<K> }:terminalid
{ terminalid<U><0,9999> }:0
{ <cr>|priority<K>|step<K>|telno<K> }:telno
{ telno<S><1,16> }:315012
{ <cr>|priority<K>|step<K> }:
Command:
mgpstnuser batadd 1/6/0 1/6/2 0 terminalid 0 telno 315012
UA5000(config)#save
// save
{ <cr>|configuration<K>|data<K> }:
Command:
save
>>User name:root
MD
>>User password:
UA5000>enable
UA5000#config
UA5000(config)#vlan
signaling)
UA5000(config)#vlan
media)
UA5000(config)#port
UA5000(config)#port
frame/slot/port
UA5000(config)#port
UA5000(config)#port
UA5000(config)#port
UA5000(config)#port
1218 standard
1418 standard
vlan
vlan
vlan
vlan
1218
1418
1418
1418
0/2
0/2
0/2
0/2
7
0
6
7
//save