You are on page 1of 1

ANNEXURE-1A

PAINTING SYSTEM
Sr. no Description
Overground non insulated pipework inclusive of pipe , fittings, supports etc. , Indoor & outdoor, for Temperature below 150 Deg. Cent. Overground non insulated pipework inclusive of pipe , fittings, supports etc. , Indoor & outdoor, for Temperature over 150 Deg. Cent. Overground insulated pipework inclusive of pipe , fittings, supports etc. , Indoor & outdoor, for Temperature below 150 Deg. Cent. Overground insulated pipework inclusive of pipe , fittings, supports etc. , Indoor & outdoor, for Temperature over 150 Deg. Cent.

Nature of exposure

Treatment in the shop


Surface quality
Sa 2 1/2

Treatment at site
Surface No. of DFT/COAT quality coats in microns
clean & retouch 2F 1F 30 40

No. of coats
1P 1I

DFT/COAT in microns
40 50-60

Paint system
two component epoxy polyamide zinc chromate two component epoxy polyamide with MIO

paint system
two component epoxy polyamide enamel two component Polyurethane

Total DFT in microns(shop & site)


190 - 200

Extreme corrosive

Extreme corrosive

Sa 3

1P

40-70

Zinc ethyl silicate

clean & retouch

2F

15

silicone aluminium

90-100

Extreme corrosive

Sa 2 1/2

1P

40

two component epoxy polyamide zinc chromate

no finish coat

40

Extreme corrosive

clean

40-60

Corrosion protective wax or grease

no finish coat

40-60

Note :-

1) Sa 1, Sa 2 , Sa 2 1/2 , Sa 3 refers Blast cleanings & in the order of increasing cleanliness. 2 ) P - Primer coat, I - Intermediate coat , F - Finishing coat , DFT - Dry film thickness in microns , MIO - Micaceous iron oxide , WP - Wash primer

SPEC NO. TC/S/ESHL/47/0/881/04/003 (ReV.-1)

You might also like