You are on page 1of 29

1 Nokia Siemens Networks

Confidential





VHA AUS


9
th
Mar 2012
Huawei Tools Description
2 Nokia Siemens Networks
Confidential
M2000
3 Nokia Siemens Networks
Confidential
M2000
The main tasks that can be performed on M2000 are:

To fetch the Dump
To activate Measurement counters
Modify the parameters
To define Custom KPIs.
To define KPI report template
To fetch KPI reports
To fetch Alarms(both History and Active)

Note: In M2000, KPI reports can be fetched only either by Cell
level or by RNC level.
Hence PRS tool is preferred to fetch the KPI report which is
more user friendly and also similar to the NGR of NSN.


4 Nokia Siemens Networks
Confidential
M2000: To fetch the Dump
5 Nokia Siemens Networks
Confidential
M2000: To fetch the Dump
1. Open the MML command window
2. Select the NE type
3. Select the RNC of which the dump is required
4. Type the command Exp CFGMML and execute it.(Path and
filename is not mandatory)
5. Open the WebLMT of the respective RNC to download the
configuration file.
a) To open the WebLMT, Go into the Main topology, Right
click on the RNC and select the Maintenance Client.
b) In the main window of Weblmt, Click on the File manager
and browse the file path to download it.

Note: The file downloaded will be in .txt format.
Respective snaps are attached in the next slides.

6 Nokia Siemens Networks
Confidential
Select the type of NE (RNC or BSC)
Type the Command and
execute
The file will be saved in
the mentioned path.
To retrieve the saved file,
please refer the next slide.
M2000: To fetch the Dump// running MML Command
7 Nokia Siemens Networks
Confidential
M2000: To fetch the Dump// WebLMT
Go into the Topology, Click on Main topology, select the Region and then RNC, right
click on RNC and click on Maintainance client.
Select the File manager
8 Nokia Siemens Networks
Confidential
M2000: To fetch the Dump// WebLMT// File Manager
Browse the path, select the file, click on the download tab and give the path.
9 Nokia Siemens Networks
Confidential
M2000: To activate Measurement counters
10 Nokia Siemens Networks
Confidential
M2000: To activate Measurement counters
1. Go into the performance and click on Measurement
management.
2. Select the appropriate Function Subset and NE.
3. In Measurement status, we can check the active counters
4. In Measurement settings, Select the appropriate Function
set and Function subset, find the counter and activate it ()
for either 15min or 60 min or 24 hrs
5. Click Apply to activate the Counters



11 Nokia Siemens Networks
Confidential
M2000: To activate Measurement counters// Measurement Status
In Measurement status, we can check the active counters
12 Nokia Siemens Networks
Confidential
M2000: To activate Measurement counters// Measurement Settings
In Measurement settings, Select the appropriate Function set and Function subset,
find the counter and activate it () for either 15min or 60 min or 24 hrs.
Click Apply to activate the Counters.
13 Nokia Siemens Networks
Confidential
M2000: To Modify the Parameters
14 Nokia Siemens Networks
Confidential
M2000: To Modify the Parameters
It is mandatory to know the commands to change the
parameters.
Different parameters belongs to different classes and each
class has its own syntax.
For example:
If need to modify the CPICH power.
1) Lst UPCPICH to check the existing CPICH power
2) Mod UCELL to modify the CPICH Tx power(note: the
modified power should be in the max and min limit of CPICH
power. To modify the max and min limit use the command
Mod UPCPICH.


15 Nokia Siemens Networks
Confidential
MOD UCELL
LST UPCPICH
M2000: To Modify the Parameters // e.g. Modify CPICH power
16 Nokia Siemens Networks
Confidential
M2000: To define Custom KPIs
17 Nokia Siemens Networks
Confidential
M2000: To define Custom KPIs
1. Customized KPIs can be created using M2000. Click on
Performance and select Custom Counter management.
2. In the Function subset, select the BSC or RNC.
3. To create a new report, click on the tab Add.
4. Give some name for custom counter, Units, Select the
Function set and Function subset. (note: Pay attention to
select Function set and Function subset, we can only find
the counter in related Function set and Function subset)
5. From the Function set, select the counters, use the
arithmetic operations available to add, subtract, multiply.. In
between the counters.
6. Click Apply and then ok
Note: Since we are not using M2000 in VHA-AUS project for
performance management this may not require.
GP of mathematical operator in the window is
measurement period, its unit is minute;
For RNC KPI, we can only select counters of RNC wise;
for cell KPI, we can only select counter of cell wise, M2000 cant
support gather function.
18 Nokia Siemens Networks
Confidential
M2000: To define Custom KPIs// Adding a new KPI// e.g. for SHO attempts
Some Name for
identification
Units
Final formula can be seen in this window.
19 Nokia Siemens Networks
Confidential
M2000: To define KPI report template
20 Nokia Siemens Networks
Confidential
M2000: To define KPI report template
1. Go into the performance select the query result
2. Select New query
3. Select same Function Subset in directory tree of new
window as that of defined KPI formula. We can only select
unique Function Subset in one report, so define all
counters of a report in the same Function Subset. Then
select measurement object in the window of Object
Settings.
4. In the object settings, Select the Objects (RNC, BSC or Cell)
5. In the Counters settings, select the counters that need to be
fetched.(the counters can be system counters or the
customized one)
6. In time conditions, select the time for which the KPI need to
be fetched.
7. Click on Save template and save it with appropriate name.




21 Nokia Siemens Networks
Confidential
M2000: To define KPI report template // Adding a new KPI template
There is some issue with window size when new query is selected. So no more
snaps can be attached for this class
22 Nokia Siemens Networks
Confidential
M2000: To fetch KPI reports
23 Nokia Siemens Networks
Confidential
M2000: To fetch KPI reports
1. Go into the performance select the query result
2. Select the customized KPI template, right click, select the
Query results and then click on any of the time lines
specified. (note: if the report is required for some other
measurement period select Specific)
3. Once the report is generated click on save tab and save it to
local PC.


Note: For VHA AUS there is some restriction in M2000 for
fetching KPIs. PRS is preferred for performance
management.


24 Nokia Siemens Networks
Confidential
M2000: To fetch KPI reports
25 Nokia Siemens Networks
Confidential
M2000: To fetch Alarms(both History and Active)
26 Nokia Siemens Networks
Confidential
M2000: To fetch Alarms
Active alarms
1. Go into the monitor select the Browse alarm list
2. In the Basic settings, select the Severity, status and type
3. In Alarm source, select the NE type and click ok.

History Alarms:
1. Go into the monitor and select the Query Alarm logs.
2. Follow the same procedure as mentioned in the Active
alarms. Mention the history period for which the alarms are
fetched.

27 Nokia Siemens Networks
Confidential
M2000: To fetch Active Alarms
28 Nokia Siemens Networks
Confidential
M2000: To fetch Active Alarms
Select the Object, i.e. RNC or NodeB or Cell.
29 Nokia Siemens Networks
Confidential
End

You might also like