TMS - SELFCLIMBING SYSTEM CLIMBEX The TMS Selfclimbing System Climbex is a hydromechanically driven lifing appliance. In conjuncton with special scafolds connected to it, it can be used for lifing formwork or other loads, as well as wind protecton shield. One of the biggest advantages is the independence of a crane, through the use of hydromechanical components. Further advantages are: The system is guided to the constructon during the climbing process. Secured climbing up to a wind speed of about 70 km/h. Big platorms, variably adjustable in its size and shape according to the building geometry. Arbitrary height of the pouring sectons up to 4.5 m. Refnishing of the concrete surfaces can be made easily from the suspended platorms. CALCULATED WIND LOADS max. 165 km/h (CLIMBEX fxed to the structure) max. 70 km/h during climbing process Live loads: 300 kg/m 2 for platorm level 0 150 kg/m 2 for platorm level +1 and -1 75 kg/m 2 for platorm level -2 When performing the structural design calculatons for the CLIMBEX hydraulic system two diferent load situatons must be considered on the constructon site. The loads in the statcally anchored state, in which all the actual building operatons are carried out. The loads occurring during climbing (especially the max. allowable wind load of about 70 km/h). 133 CLIMBEX HYDRAULIC CLIMBING 134 CLIMBEX HYDRAULIC CLIMBING 135 CLIMBEX HYDRAULIC WIND SHIELD SYSTEM Climbex Windshield System is used in high rise buildings to protect the workers against wind and also as a safeguard not to fall down. This situaton increase the productvity on the job-site a lot! The complete closed protecton can be moved from foor to foor by crane, using a traverse or by TMS hydraulic-system - always designed and optmized for the project!