You are on page 1of 3

D13086

OD
14
C17
RY
11
E5
ECM
OD1
Cruise Control ECU
DIAGNOSTICS AUTOMATIC TRANSMISSION (A340E, A340F)
DI519
781 Author : Date :
2003 TOYOTA TACOMA (RM1002U)
O/D Cancel Signal Circuit (Only for 3RZ FE)
CIRCUIT DESCRIPTION
While driving uphill with cruise control activated, in order to minimize gear shifting and provide smooth cruis-
ing O/D may be prohibited temporarily under some conditions.
The cruise control ECU sends O/D cut signals to the ECM as necessary and the ECM cancels O/D shifting
until these signals are discontinued.
WIRING DIAGRAM
DI0T114
D13087
OD1 () (+)
I22453
O/D
ON
() (+)
DI520
DIAGNOSTICS AUTOMATIC TRANSMISSION (A340E, A340F)
782 Author : Date :
2003 TOYOTA TACOMA (RM1002U)
INSPECTION PROCEDURE
1 Check voltage between terminal OD1 of ECM and body ground.
PREPARATION:
Turn the ignition switch ON.
CHECK:
Measure voltage between terminal OD1 of ECM and body
ground.
OK:
Voltage: 4 6 V
OK Proceed to next circuit inspection shown on
matrix chart (See page DI476).
NG
2 Check voltage between terminal OD of cruise control ECU harness side connec-
tor and body ground.
PREPARATION:
(a) Disconnect the cruise control ECU connector.
(b) Turn the ignition switch ON.
CHECK:
Measure voltage between terminal OD of cruise control ECU
harness side connector and body ground.
OK:
Voltage: 9 14 V
OK Check and replace the cruise control ECU
(See page IN28).
NG
DIAGNOSTICS AUTOMATIC TRANSMISSION (A340E, A340F)
DI521
783 Author : Date :
2003 TOYOTA TACOMA (RM1002U)
3 Check harness and connector between cruise control ECU and ECM
(See page IN28).
NG Repair or replace the harness or connector.
OK
Check and replace the ECM
(See page IN28).

You might also like