The 4 in. Multi-discharge Nozzle is used only for total flooding applications. The nozzle insert is brass and the remainder of the nozzle is steel. Nozzle is painted red with chrome or nickel plating available as an option.
The 4 in. Multi-discharge Nozzle is used only for total flooding applications. The nozzle insert is brass and the remainder of the nozzle is steel. Nozzle is painted red with chrome or nickel plating available as an option.
The 4 in. Multi-discharge Nozzle is used only for total flooding applications. The nozzle insert is brass and the remainder of the nozzle is steel. Nozzle is painted red with chrome or nickel plating available as an option.
Description The 4 in. multi-discharge nozzle is used only for total flood- ing applications. The nozzle insert is brass and the remain- der of the nozzle is steel. The nozzle is available in orifice sizes ranging from 2 through 18. The dischargerate of the nozzle depends on the orifice size and the nozzle pressure. The nozzle is painted red with chrome or nickel plating available as an option. ANSUL Component Material Thread Size/Type Orifice Size Approvals 4 in. MD Nozzle Nozzle: 1/2 in. NPT Female 2 through 4.5 U.S. Coast Guard (162.038/7/0) w/Strainer Steel UL (EX-2968) Insert: FM Approved Brass 4 in. MD Nozzle Nozzle: 1/2 in. NPT Female 5 through 10 U.S. Coast Guard (162.038/7/0) Steel UL (EX-2968) Insert: FM Approved Brass 4 in. MDL Nozzle Nozzle: 3/4 in. NPT Female 8 through 18 U.S. Coast Guard (162.038/7/0) Steel UL (EX-2968) Insert: FM Approved Brass 1-16 Shipping Assembly Part No. Description Orifice Code 426106 4 in MD nozzle with strainer 2 4.5 426107 4 in MD nozzle 5 10 426108 4 in MD nozzle 8 18 NOTE: When ordering, specify orifice code required: Example Part No. 426107 6.5. ANSUL INCORPORATED, ONE STANTON STREET, MARINETTE, WI 54143-2542 715-735-7411 Form No. F-90221-2 1998 Ansul Incorporated Litho in U.S.A. Multi-Discharge Nozzle 4 MD with Strainer Multi-Discharge Nozzle 4 MD and 4 MDL STRAINER METAL HORN BRASS NOZZLE INSERT CODE NO. OF ORIFICE STAMPED ON CONNECTOR 1/2 IN. NPT 5 13/16 (13.1 cm) 3 1/2 IN. (8.8 cm) METAL HORN BRASS NOZZLE INSERT CODE NO. OF ORIFICE STAMPED ON CONNECTOR 1/2 IN. OR 3/4 IN. NPT (SEE TABLE) 5 13/16 (13.1 cm) 3 1/2 IN. (8.8 cm) 001831a 001831b 001835a ANSUL is a registered trademark. 001835b