Professional Documents
Culture Documents
Application
Jet nozzles are used for directing large volume of air over longer distances. Used in large
areas, and also for areas where ceiling air distribution solutions is impossible or not
preferred. It is simple to install and commission, as the nozzle can be adjusted up to 45º in
any direction. Flowrate can easily be adjusted with the built-in hit-and-miss damper.
Technical Information
Construction
Jet nozzle from one-piece 1 mm thick aluminium
Hit-and-miss damper is secured by thumb screw
Installation
The BJN is easily installed on top of the opening
Surface Finish
Natural anodised.
1/4
PRUDENTAIRE
Dimensions
45º 45º
D
Neck
Opening
Size N Opening D
150 150 170 75
200 200 220 100
250 250 270 125
300 300 320 150
2/4
PRUDENTAIRE
OR
- xx PT Plenum, internally lined c/w top entry collar
PS Plenum, internally lined, c/w side entry collar
- xxxx OBD Opposed Blade Damper
BD Butterfly Damper c/w Wing nut for locking damper in position
RBD Radial Blade Damper
ROBD Round Opposed Blade Damper
Example: BJN-250-A-ROBD
Nomenclature
3/4
PRUDENTAIRE
Size v 2 3 4 5 6 7 8 10
Pt 7 15 17 25 32 48 66 86
150 V (cmh) 130 196 262 323 393 460 525 655
V (l/s) 36 54 73 90 109 128 146 182
LT 2.6 4 5.5 6.8 8.2 9.6 11 15.2
NC - 26 30 36 43 49 53 56
200 V (cmh) 233 350 467 583 700 816 933 1166
V (l/s) 65 97 130 162 194 227 259 324
LT 3.8 5.6 7.4 9.2 11 13 14.7 20.5
NC - 26 30 36 43 49 53 56
250 V (cmh) 365 548 730 913 1095 1280 1460 1825
V (l/s) 101 152 203 254 304 356 406 507
LT 4.6 7 9.5 11.6 13.8 16.2 18.5 25.4
NC - 24 28 33 38 42 46 50
300 V (cmh) 526 790 1052 1315 1580 1842 2105 2632
V (l/s) 146 219 292 365 439 512 585 731
LT 5.6 8.4 11.2 14 16.8 19.5 22.2 31
NC - 24 29 33 38 42 46 50
4/4