NOLLVASTAWater Bird
WATER TREATHENT CHEMICALSL.LC,
10,
Continua’
DUPLEX WATER SGFTED
METHOD OF INSTALLATION
Inspect the tank visually for any damages like cracks, dents etc
‘Make sure the plug on the bottom of the tank (if any) is fully tight,
Fill the tank with water and check for leaks.
Cut the riser to be to the desired length as per the manufacturer's
recommendation & install it in the tank
Close the riser tube with a tape, so that no media enters the tube
during media filling.
Fill the vessel with the supplied resin
Remove the tape on the riser tube, and install the valve on the top
of the vessel.
Connect the inlet, outlet and drain lines to the valve as per the
indications/ direction arrows on the valve.
Instail isolation valves, bypass valves and unions on the iniet, outlet
& drain lines to facilitate maintenance,
Install the Air check assembly in the brine tank, and connect it to
the respective valves with the supplied tubing.