Professional Documents
Culture Documents
surface conditions.
The HT-400 is designed for use on the DM4 family of instruments and the HT-400A is
designed for exclusive use on the DMS family of instruments.
NOTE : Measurement range is limited by surface temperature, material and coupling factor
(thickness measurements of 10.0"/254mm are not obtainable at 1,000 F/540 C). Use at
elevated temperatures may require probe cycling.
Accessories shown above :
Identifier
ET-103
ET-104
BH-342
KBA-535
KBA-536
Description
4" Plastic Probe Extender
7" Plastic Probe Extender
S. Steel Bell Housing
Armored Jacket Cable
Rubber Jacket Cable
Type
HI-Tempco 2.0 oz. Tube
ZGM 4 oz. Tube
Description
Silicon Grease Base for use up to 550 F / 288 C
Thick Putty for use from 400 F to 1,000 F (204C to
540C)
Probe Specifications:
Nominal Frequency
Contact Diameter
Measuring Range
Temperature Range
Length
Diameter
5.00 MHz
0.500" (12.7 mm)
0.040" to 10.00" ( 1 - 254 mm)
< 1000 F (540 C)
2.5" ( 64 mm)
0.875" (23 mm)