You are on page 1of 1

Oracle University | Contact Us: +27 (0)11 319-4111

PTR Only Entry Level-Servers and Oracle Hardware Support Principles (TDC-1001) - SP
Duration: 5 Days
What you will learn
Day 1
Introductions About the course Sun System Handbook Electrostatic Discharge
Day 2
Service processors, with LABs on tip, ALOM and ILOM setup and connection ( serial and network ) Oracle X86
hardware range overview Oracle X86 machine architecture X4270 Service manual and Lab on FRU replacement on X86
HW .
Day 3
Sparc Entry-level machine power on sequence POST + OBP ( Variables and their meaning, as well as OBP upgrades )
Physical Device Paths Sparc Entry-level range and Architecture overview Fault management in Sparc hardware as
handled by the SP How faults are monitored How faults are reported How faults arre cleared ( with or without actual HW
replacement ) POST and PSH fault handling Lab on T1000s covering Connection to SP Finding the fault Preparing for
fix actual HW fix ( and HW lab ) test and verify the fix return the machine to normal state.
Day 4
T5240 Service manual HW FRU replacement LAB on T5220 Blade 6000 overview Blade 6000 HW lab ( and Blade 8000
demo ) Blade 6000 configuration through ILOM Disk Blade management in Blade 6000 ( including REM & NEM basics)
Day 5
Enterprise Installation Standards ( EIS ) History and why structure of DVD Setup standard ( + LAB ) Patching using EIS
dvd ( + LAB ) EIS checklists Solaris Utility Environment ( SUE ) Where to get How to use Certification Test on week 1
contents.

Copyright 2012, Oracle. All rights reserved.

Page 1

You might also like