Professional Documents
Culture Documents
INPUT DATA
Pipe Geometry
262.9
3.5
3.0
Design Condition
1.000
0.900
1000.000
0.031
0.048
Result
pass
Temperature Range
Graph
Method of Calculation
0.30
Pressure (MPa)
0.25
0.20
0.15
0.10
0.05
0.00
Fe=1.5
Fe=3
External
Pressure
2-Longitudinal Compr
Graph
Pressure (MPa)
0.25
External
Pressure
0.20
0.15
0.10
0.05
0.00
0
50
100
150
200
250
300
350
D/tr
4.00
250
53.09
Allowable (Mpa)
92.63
Allowable (Mpa)
Result
pass
Result
Graph
6-Local Hoop (A
Gra
1. This data calculation sheet is protected by intellectual property law including copyright. You as a user are not al
2. The formula and methods which are used in this calculation sheet are based on those mentioned in the technical
3. The owners of CALCSTRESS.COM cannot guarantee the completeness and accuracy of any information includ
for a professional service. So, it must not be used for any professional services. CALCSTRESS IS NOT RESPO
, MPa)
ethod of Calculation
Axial Compressive Stress (Mpa)
4.000
30000
60
emperature Range
Load (KN)
Fa
VS L
Fa
VS D
Euler Str
Load (KN)
Euler Str
L, m (D, mm)
Column K
Allowable Load
Applied
Applied Load
Applied Load
Allowab
3.60
250
44.06
llowable (Mpa)
44.48
Allowable (Mpa)
esult
pass
Result
All
ght. You as a user are not allowed to copy, republish and distribute this calculation sheet without permission.
mentioned in the technical papers on the WWW.CALCSTRESS.COM website. User must be aware of the applied method's re
cy of any information including formula and methods applied and used in this datasheet. Moreover some sheets and cells are u
CSTRESS IS NOT RESPONSIBLE FOR ANY DAMAGES, OMISSIONS AND ERRORS ARISING FROM USING THIS
ion Sheet
Design Code
Mechanical Properties
Mpa)
al/ hoop
g/m3)
ent (, mm/mmC)
, MPa)
Design Factors
25200
12500
124
6400
0.400
1800
1.800E-05
124
Stress (Mpa)
13.50
Allowable Euler Buckling Stress
30.00
Allowable Compressive Load (KN)
33.94
St
vs L
200.00
St
vs T
180.00
160.00
140.00
120.00
100.00 Stress (MPa)
Shell Buckling
80.00
60.00
40.00
20.00
allowable Shell
Buckling stress
Axial Compressive
Stress
Stress
120.00
100.00 Stress (MPa)
Shell Buckling
80.00
60.00
40.00
20.00
0.00
50
100
150
L,m (T, C)
Applied stress
Column U
Allowable Stress
Allowable Stress
200
D/tr
250
300
350
Deflection
9.00
support span
Support Type Selection
support (mm)
(Mpa)
250
6.47
Deflection (mm)
10.00
pass
Result
0.00
0.00
Pipe Span (m
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
20.00
10.00
0.00
0.00
Pipe Span (m
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
Anchored Beam
Allowable Deflection
et. Moreover some sheets and cells are unlocked and the formula can change easily. It has been designed for training only. It
RORS ARISING FROM USING THIS CALCULATION SHEET. This sheet content may change without any prior notice
015
ISO 14692-3
Design Factors
124
45
0.720
0.830
0.900
1.000
1.000
1.000
hl(2,1))(Mpa)
l(0,1))(Mpa)
h ratio (r)
14692 (f2)
692-3 (f3)
66.23
pass
22.86
pass
172.45
pass
allowable Shell
Buckling stress
Axial Compressive
Stress
Stress
150
200
D/tr
250
300
350
Deflection
5.00
925
6.07
12.50
pass
m)
3.00
5.00
6.00
7.00
8.00
3.00
5.00
6.00
7.00
8.00
Anchored Beam
It has been designed for training only. It may not be complete enough
tent may change without any prior notice.