You are on page 1of 2

Data from MTL

1. Engine Specifications
No. of Cylinder
Bore diameter
Stroke
Connecting rod length
Compression ratio
Maximum power
Maximum torque
2. Exhaust specifications
Temperature(C)
Pressure(Pa)
Flow rate (kg/s)
COx (g/kWhr)
NOx (g/kWhr)
HC (g/kWhr)
PM (g/kWhr)
Smoke (m-1)
Cpe (specific heat capacity at constant pressure)
Water inlet temperature (C)
Water outlet temperature (C)
Density of exhaust gases kg/m3
Velocity of exhaust gases m/s
Thermal conductivity (W/m.K)
3. Intake Specifications
Temperature(C)
Pressure(Pa)
Flow rate (kg/s)
Density of intake air kg/m3
Velocity of intake air m/s
Thermal conductivity (W/m.K)
4. Oil Bath Cleaning Unit
Pressure at inlet
Temperature inlet
Velocity inlet

Flow Rate inlet


Lubricating Oil level or quantity
Pressure at outlet
Temperature outlet
Velocity outlet
Flow Rate outlet

You might also like