You are on page 1of 5

West Central Railway Engg. Deptt.

Jabalpur Division

STATEMENT SHOWING THE DETAILS OF ESTIMATED COST

Name of work: JBP DIVN: - Annual Maintenance Contract 2010-11 for Paras makes USFD machines

(7 DRTs & 3 SRTs) No. 201/45, 201/72, 201/73, 201/122, 201/123, 201/549, 201/550 (DRTs) &101/420,
101/427, 101/430 (SRTs) With their OEM (M/S Paras Electronics Hyderabad)

Last Estimated
Unit Total accepted Rate of Estimated
Sr.
Description In No. of Rate of each service Total
No.
Nos services each @ 6% above Amount
service
Servicing of DRTs No. 201/122,
201/123, 201/549, 201/550, 07 14 6000/- 6360/-
1 98,210/-
201/712, 201/713, 201/714
Service tax @ 10.30% 618/- 655
Servicing of SRTs No.
03 06 4800/- 5088/-
2 101/420, 101/427, 101/430 33672/-
Service tax @ 10.30% 495/- 524/-
Spares as per requirement (List enclosed) 8,00,000/-
3
Salee tax @ 4% 32,000/-
GRAND TOTAL 9,63,882/-

SPARES LIST

(a) Major Component


Last accepted
Sr.No. Name of component
Price each
01 Cathode Ray Tube 36000/-
02 Instrument Front Panel 3600/-
03 Factory Programmed ICs 1250/-
04 IC 28C64 850/-
05 IC 28C16 525/-
06 IC 74C922 925/-
07 Main Inverter Transformer 750/-
08 EHT Multiplier Box 1250/-
09 Hybrid Micro Circuit PE 01 1050/-
10 Hybrid Micro Circuit PE 02 1450/-
11 Foam Leather cover for instrument 400/-
12 Instrument Handle 600/-
13 Instrument/Battery Connector 350/-
14 IC RT - AMP 3500/-

DRM (W) JBP

Cont…………2
…..2…..

(b) Probes and Parts/Spares of Trolley: -

Last accepted
Sr.No. Name of component
Price each
DRT AXLE ASSEMBLY
01 Wheel drum with SS inserts 2850/-
02 Flange 1350/-
03 Cover 350/-
04 Spacer 185/-
05 Bearing 275/-
06 Complete wheel assembled 6700/-
DRT PROBE ASSEMBLY
07 Guide roller support 575/-
08 Guide roller 275/-
09 Bearing for Guide roller assembly 160/-
10 Sleeve (Teflon) 400/-
11 Liner bearing 1290/-
12 Probe assembly carriage + liner bearings 6800/-
13 Probe assembly housing 4750/-
14 Probe assembly support 4000/-
DRT GENERAL ASSEMBLY
15 Main Frame 11600/-
16 Water tank 2450/-
17 Tool box 2050/-
18 Legs (a) 375/-
19 Legs (b) 250/-
20 Gate valve 300/-
21 Water tank brackets (Pairs) 260/-
ANGLE AND NORMAL PROBE ASSEMBLIES
22 Probe shaft 180/-
23 Probe roller assembly 300/-
24 Angle probe shoe 150/-
25 Normal probe shoe 150/-
26 Probe assembly pivot (pair) 180/-
27 Bearing for probe assembly 165/-
28 Normal probe 4 MHz without shoe and roller assembly 3000/-
29 70 deg (F/B angle probe 2 MHz without shoe and roller assembly 3100/-
30 70 deg angle probe 20mm 2100/-
31 Cable with BNC connectors at both ends 3m long 375/-
32 Spring for probe assembly 75/-
33 70 deg angle probe 8mm 2700/-
34 45 deg S/C 2 MHz angle probe with BNC cable 2475/-
35 45 deg B/F 2MHz angle probe without shoe and roller assembly Not in use
36 0 deg normal probe 2MHz S/C contact probe 2700/-

DRM (W) JBP


Cont…. 3

…3…

Sr.No. Name of component Last accepted


Price each
ANGLE AND NORMAL PROBE ASSEMBLIES
37 70 deg F/B GFC probe 2 MHz Not in use
38 Probe holding assembly (complete set DRT) 3250/-
39 Probe holding assembly (complete set SRT) 2850/-
40 Angle Probe U bracket 650/-
41 Normal Probe U bracket 650/-
SRT WHEEL ASSEMBLY
42 Wheel drum 850/-
43 Flange 550/-
44 Rim 450/-
45 Flange new type 490/-
46 Wheel Assembly Spring 75/-
47 Wheel Assembly Sleeve 190/-
48 Bearing 200/-
49 Thrust bearing 250/-
50 Complete wheel assembled with bracket old type 6000/-
51 Complete wheel assembled with bracket new type 4950/-
SRT GENERAL ASSEMBLY
52 Probe lifting mechanism(SRT) 1250/-
53 SRT frame 8400/-
54 SRT water tank 2100/-
55 SRT tool box 1550/-

(A) Others

Last accepted
Sr.No. Name of component
Price each
56 Power pack complete with box, cable & connector 3600/-
57 Battery without box, cable & connector 2600/-
58 Battery charger 2750/-
59 IIW block (VI) 9000/-
60 Tandem Fixture 2750/-
61 View Hood 475/-
62 Battery connector with cable 350/-
63 Moulded Unit Carrying Case 2200/-
64 Drain Cock 110/-
65 Foam/Rexin cover for CRT unit 350/-
66 Unit Handle 650/-
Std Rail Piece for sensitivity setting of GFC testing as per CS. 1 of RDSO
67 * 4950/-
manual 2006

DRM (W) JBP


Cont......4

.....4......

(B) Others

Last accepted
Sr.No. Name of component
Price each
1 Guide Rod – vertical 800/-
2 Guide Rod – Horizontal 1250/-
3 DRT trolley Lifting Handle Set of 02 Nos. 1200/-
4 DRT Water circulating system (Set) 2500/-
5 Probe Roller Assembly for SRT GFC/NGFC Probe 200/-
6 0 Degree Normal Probe 2 MHz DC 3000/-
7 Probe Holder L- Bracket (SRT) 900/-
8 Probe Holder Housing (SRT) 600/-
9 Probe Holder Tee – Bracket (SRT) Pair 350/-
10 Probe Holder Shaft 450/-
11 Probe Holder F- Bracket (DRT) 1200/-
12 Probe Holder Housing (DRT) 750/-
13 Unit Holding Bracket for SRT 700/-
14 SRT – Water Circulation System 750/-
15 Calibration Block 50x50x60 mm 975/-
16 DRT Extension Arm for GFC 02 Nos 5500/-
17 DRT Junction Box & Panel for GFC 6200/-
18 Aluminum Holder for Sensitivity Block 8000/-
19 * Sensitivity Setting Rail Block for AT Welds 4000/-
20 * Sensitivity Setting Rail Block for SEJ 3200/-
21 Unit Holding Breaker for SRT 700/-
22 SRT – Water Circulation System 750/-
23 DRT Extension Arm for GFC 2 Nos. 5500/-
24 DRT Junction Box & Panel for GFC 6200/-

* For Item A (67), C (19, 20), Railway to supply rail pieces required.

TERMS & CONDITIONS: -

(a) The AMC will be operative for a period of one year from the date of commencement.
(b) Each unit (DRT’s & SRT’s) will be serviced as and when required during the AMC period.
(c) It will also cover the servicing of the trolley and calibration of the unit if required.
(d) Spares as and when required to be replaced with the Prior approval of XEN (MD) JBP.
(e) Suitable Guarantee of spares should be given.
(f) Machine should not be detained at your works for more than 05 days during
servicing/maintenance.
(g) Payment will be made at six months interval after submitting consolidated bills along with
satisfaction of work certified by PWI USFD.

CHARGABLAE: To Revenue

DRM (W) JBP

You might also like