Professional Documents
Culture Documents
In RXI
pr .<iub> eg. pr .0095
lk <proxy>
st atmport=ms-x-y
bl
lget ms-2-2 (then check iub number with STR printout – see tally or not)
reservedBy Aal2PathVccTp=b0001a2 <----- iub # = 0001
In RBS (when port is ready but E1 not pull through yet – so that no alarm)
pr atmport
get <proxy> ie. get 1345
lget Subrack=1,Slot=2,PlugInUnit=1,Etm1=1,E1PhysPathTerm=pp2
set <proxy> administrativeState 0 (to lock the 2nd physical port)
set 194 administrativeState 0 (to lock the 2nd physical port)
pr aal2routingcase 6012200500<rncid><iub-no>
del <proxy>
lst .b<iub-no> eg. lst .b0095
ldel .b<iub-no>
lpr atmport=ms-18-1
lget atmport=ms-18-1
del <proxydown>-<proxytop-1> WARNING : Don’t remove the MS port
del AtmPort=MS-20-1-* (to delete the whole 63 ports of the ETMC41)
lst Slot=18.*Vc12Ttp=1 or to block all ports : lbl Slot=18.*Vc12Ttp=*
20. To change maxtxpowerdl for specific cell (usually to clear CONGESTION alarms)
In RNC
get CUV1BU_1 maxtxpowerdl --> in EMAS, click Utrancell, Properties, Cell (PCIPCH in Common Channel)
set CUV1BU_1 maxtxpowerdl 402
maxtxpowerdl value stated as x10dBm (actual = 0.1x)
maxtxpowerdl value usually 0.4 dBm lesser than maxDlPowerCapability (from RBS)
thus if maxDlPowerCapability 422, maxtxpowerdl 418 (422 – 4)
in P3 - get SOGXBU_1 maximumtransmissionpower
26. To autocreateCV
In RNC & RBS
Get config
Cv ls (2 CVs will be used for the autocreate CV function)
Set “proxy” autoCreatedCVIsTurnedOn true/false
Set timeForAutoCreatedCV (UTC time)
Set timeForAutoCreatedCV 13:00 (cv autocreated at 9pm)
30. To create CV
In RNC,RXI & RBS
cvms CXP9010373%1_R11G_050725_1516 emfauzi change_ntpserver_ip
cvms CXP9010373%1_R11G_050725_1516 followed by comments for the CV
cvset CXP9010373%1_R11G -- to set the CV startable
31. To change LAC (Location Area Code)
In RNC
get servicearea=132
get locationarea
get routingarea
get externalutrancell LAC --> corresponding LAC changed at neighbour RNC (if defined)
set ExternalUtranCell=uefaMU_1 lac 12050 -->to change the externalutrancell LAC parameter for the
particular cell at another/neighbour RNC
get utrancell=uefa lac --> to view externalutrancell LAC parameter at neighbour RNC
get utrancell=cinoMU_3
060206-11:09:22
.......
===========================================================================
==========================
SMN APN BOARD GREEN YELLOW RED PRODUCT NR REV DATE SERIAL NR TEMP COREMGR
===========================================================================
==========================
0 1 SCB2 ON OFF OFF ROJ 119 2108/3 R3D 20050608 TU86364489
0 2 HUB MP ON OFF OFF ROJ 119 2106/40 R5A 20050626 TU86494707 +32C Active
0 3 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050626 TU86494699 +31C StandbyReady
0 4 TUB ON OFF OFF ROJ 119 2104/4 R3B 20050620 TU86442436
0 5 TUB ON OFF OFF ROJ 119 2104/4 R3B 20050620 TU86442439
0 8 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644146
0 10 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644042
0 12 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644052
0 14 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644056
0 16 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644037
0 18 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644067
0 20 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050708 TU86592867
0 24 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86545997
0 25 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86545998
0 26 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86545996
0 27 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86546001
0 0 SCB2 ON OFF OFF ROJ 119 2108/3 R3D 20050608 TU86364157
-----------------------------------------------------------------------------------------------------
1 is slot 1
0 is slot 28
46. redefine TD in VC
In RXI
Resources for CELL does not come up – apparently TD is defined as U42
lget AtmPort=MS-24-1,VplTp=vp1,VpcTp=1,VclTp=vc39
lrset AtmPort=MS-24-1,VplTp=vp1,VpcTp=1,VclTp=vc39 atmTrafficDescriptorId AtmTrafficDescriptor=C2P4000
In node
lacc AtmPort=MS-27-1,VplTp=vp5 eteloopback
060303-10:58:44
===========================================================================
========
Proxy Adm State Op. State MO
===========================================================================
========
1208 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1
1210 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Ssch=1
1211 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Psch=1
1212 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Pcpich=1
1213 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Pccpch=1
1214 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Pccpch=1,Bch=1
1215 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Prach=1
1216 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Prach=1,Rach=1
1217 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Aich=1
1218 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=2
1219 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=2,Fach=1
1220 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=2,Fach=2
1221 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=1
1222 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=1,Pch=1
1223 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Pich=1
1225 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1
1227 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Ssch=1
1228 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Psch=1
1229 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Pcpich=1
1230 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Pccpch=1
1231 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Pccpch=1,Bch=1
1232 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Prach=1
1233 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Prach=1,Rach=1
1234 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Aich=1
1235 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=2
1236 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=2,Fach=1
1237 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=2,Fach=2
1238 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=1
1239 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=1,Pch=1
1240 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Pich=1
1242 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1
1244 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Ssch=1
1245 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Psch=1
1246 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pcpich=1
1247 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pccpch=1
1248 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pccpch=1,Bch=1
1249 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=2
1250 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=2,Fach=1
1251 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=2,Fach=2
1252 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=1
1253 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=1,Pch=1
1254 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pich=1
1255 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Prach=1
1256 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Prach=1,Rach=1
1257 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Aich=1
===========================================================================
========
Total: 45 MOs - for fully operational site
==============================================================================
===================================
5576 TransportNetwork=1,AtmPort=MS-7-1,VplTp=vp101,VpcTp=1,VclTp=vc20932
==============================================================================
===================================
VclTpId vc20932
atmTrafficDescriptorId AtmTrafficDescriptor=U4
availabilityStatus 0 (NO_STATUS)
externalVci 20932
operationalState 1 (ENABLED)
reservedBy AtmCrossConnection=b209ib
userLabel
==============================================================================
===================================
5848 TransportNetwork=1,AtmPort=MS-6-1,VplTp=vp101,VpcTp=1,VclTp=vc20932
==============================================================================
===================================
VclTpId vc20932
atmTrafficDescriptorId AtmTrafficDescriptor=U4
availabilityStatus 0 (NO_STATUS)
externalVci 20932
operationalState 1 (ENABLED)
reservedBy AtmCrossConnection=b209ia
userLabel
==============================================================================
===================================
Total: 10 MOs
60. To check how many HSDPA users in a cell (must know CID)
In node RNC
dyncelldata cid 02301
060425-10:51:23
Trying password from ipdatabase file: /home/emfauzi/moshell/sitefiles/ipdatabase...
$ dyncelldata cid 02301
cId: 2301
Cell froId: 65
CC SP: 011000/sp0.lnh/CommonChMainPT
rncModuleId: 4
IubLink froId: 22
Total ASE DL: 944
aseDlAdm: 240
beMarginAseDl: 100
Total ASE UL: 16748
aseUlAdm: 500
aseUlAdmOffset: 40
beMarginAseUl: 0
CPM RL Count: 0
compModeAdm: 15
HSDPA UE Count: 5 <------------------------- 5 user currently
hsdpaUsersAdm: 20
SF8 RL DL Count: 0
sf8Adm: 1
SF16 RL DL Count: 0
sf16Adm: 16
SF32 RL DL Count: 0
sf32Adm: 32
SF4 RL UL Count: 5
sf4AdmUl: 20
DL Code Allocation Level: 40.23 %
dlCodeAdm: 80 %
beMarginDlCode: 5
UL Interference: -105.2 dBm
Filtered DL Power: 23.44 %
pwrAdm: 75 %
pwrAdmOffset: 10 %
beMarginDlPwr: 10
Congestion State: Uncongested
$