You are on page 1of 1
Toplok Components BB inside Board Transoms These are used where facility for a single inside board platform is required. When using scaffold boards the Inside Board Transom is utilised, It spans across the ledgers for midbay support. The unit is similar in operations to intarraciae ransom een eS & HH Hop-up Branckets 2 & 3 Boards Hop-Up Brackets provide for extra wide working platforms, lift A adaptations, or where scaffolds cannot be located directly = adjacent to the work face, Available in two sizes, of 565mm, and 7250. Sram eeesere | Two Board | 01038 ‘Three Board | 01039 Hl Cantilever Frames They are used for supporting decking or formwork at the edges, of slabs. The frames have blade ends for locating in the cup joint and can accept Jacks in three positions | ‘This is suitable for beams or panels of 1.2m, 1.25m. of 1.3m. Available in two sizes fora 1.5m. anda 1.0m. if | [HB Beam Bracket Eliminates full height support to beam formwork by locating on to slab support verticals as shown, accepts standard jacks and forkheads. Ithasa safe working load of 1500 kas Grtesern download the free tal online st nitropat.com/professional

You might also like