GUARANTEED TECHNICAL PARTICULARS OF ACSR MOOSE ZEBRA CONDUCTORS.
SL. DESCRIPTION UNIT [VALUE GUARANTEED BY BIDDER
NO. ‘ACSRMOOSE | ACSRZEBRA |
4 Name & Address of Manufacturer _Apar Industries Lid. +H
2 Particulars of Raw Materials,
2.4___| Aluminum t
a ‘Minimum Purity of Aluminum % 395 395
b ‘Maximum Copper Content % [0.04 0.04
22__| Steel Wires | Rods 7
a ‘Carbon a % 05010085 | 0.8010 085
b Manganese % 0.50 t0 1.10 0.50 to 1.10
| Phosphorus % ‘0.035 (max). (0,036 (max)
¢ ‘Sulphur % (0.045 (ma) 0.045 (max)
e Silicon % 0.40 t0 0.36 0.10 to 0.38
23 | Zine
fa Minimum purity of Zine 85 | 9988
3 ‘Aluminum Strands after stranding
31__| Diameter a
a ‘Nominal mm 358 eH
b Maximum [im 3.55 3.21
c Minimum, mm 3.51 3.15
32. [ Minimum Breaking load of Strand is
a Before Stranding_ KN 157 T 129
b After Stranding KN 1.49) 74.23
33 | Resistance of t m length of strand [Ohm
lit reo desc et 0.002921 0.003651
4 Steel Strands afer Stranding
‘44 | Diameter : a
a ‘Nominal mam 358 3.18
b Maximum mm 3.59 324 |
c Minimum mm 349 "3.42
‘45_| Minimum Breaking load of strand
a Before Stranding iN 12.86 356
b After Stranding [aN 12.22 9.45
5 ‘Galvanizing 7
a ‘Minimum mass of zine coating per
L sqm, Of uncoated wire urate om ar fee
b ‘Minimum number of one minute
dips that the galvanized strand can 3 4
withstand in the standard preece
test 2
¢ ‘Minimum no of twists which @
single strand shall withstand during ia ie
torsiop,testtor a Jength equal to 100
times ia of wite after stranding =
A Apes
Let
by
The cor
only 8
‘af aime:
EL ed
fins,[ACER Conductor
61 [UTS of Conductor WT Ted 13032
62 | Lay Ratio of conductor =
2} Outer Steel layer Nos_| 184878] 78
bh |-72 wire aluminum layer Nos 44 |_12 [a7] 10
| 16-wire aluminum layer Nos_[ 13] a1_| 16 | 0
@ | 24 wire aluminum layer Nos_|f2 | 10 | “#440
83 [Be Resstance of eoncieor a2 Tomy | 08882 aedee
6a | Minimum Corona Extinction
Voltage (line to ground) under Dry_| kV (cms) 320 154
Condition
65 | RiVat1 MHizat 308 KV Gms Tiere
under dry eonations volts | _1000(max) | 1000 (max)
&5__| Standard length of conductor Mt 7600 7500
67 | Maximum Iength of conductor that
can be offered as single length M a eee
&B | Tolerance on standard length of :
conductor id cee fae
Direction of lay Tor Outside layer | Right Hand
Linear mass of the conductor
[Standard Kaiki 2008 Tei
Minimum, oe Kalk 96¢__| 1680
Maximum Kalki 2044 1853,
Drum is a& per specification YESINO Yes Yes
No.of Cold pressure butt welding | yo 7 3
equipment available at works