Remove top panel after removing screws and remove 4 screws from back of tube head. Remove board that is nearest to cassette by pressing the 4 clips. This will expose the motor remove Screw and spring and the motor will be removable. Remember to remove the wire too.
Remove top panel after removing screws and remove 4 screws from back of tube head. Remove board that is nearest to cassette by pressing the 4 clips. This will expose the motor remove Screw and spring and the motor will be removable. Remember to remove the wire too.
Remove top panel after removing screws and remove 4 screws from back of tube head. Remove board that is nearest to cassette by pressing the 4 clips. This will expose the motor remove Screw and spring and the motor will be removable. Remember to remove the wire too.
with Allen Key and bottom 2 with Remove 4 screws Philips from back of tube head using Allen Remove board that is nearest to cassette by pressing the 4 clips. This will expose the motor Remove Screw and spring and the motor will be removable. Remember to remove the wire too. Replace with new motor and spring.