You are on page 1of 2

ABSTRACT

STUDY THE EFFECTIVENESS OF ALUMINUM SULFATE, POLYALUMINUM


CHLORIDE AND FERRIC CHLORIDE AS COAGULANTS IN TEXTILES
WASTEWATER TREATMENT.

Three type of chemical coagulants, aluminum sulfate (Alum), polyaluminum chloride


(PAC) and ferric chloride (FeCl3) have been used to investigate the effectiveness of
coagulation and flocculation process in the removal of turbidity, suspended solid and
chemical oxygen demand in textiles wastewater. Initial concentration of synthetic
textiles wastewater is 1.0 g/l with the initial turbidity is 24.3 NTU. Coagulant used
with polyacrylmide as flocculent aid. Optimum dosage of Alum achieve 96%
turbidity removal is very high with 4500 mg coag. / m3dye w.w of coagulant while the
optimum pH is 6.5 with the turbidity removal is 97%. Additions of 5 mg floc.. / m3dye w.w
of polyacrylmide as flocculent aid improves the turbidity removal to 98%. After
flocculation process DO Level and COD level also reduce from 9.67 mg/l to 7 and
from 5.5 mg/l to 1.6 mg/l. PAC also effective in polluted removal capacity, by using
250 mg/l of PAC as coagulant with adjustment ph to 6.5 by optimum of dosage and
pH with the removal turbidity is 96%. COD reduce to 0mg//l and DO reduce to 7.6
mg/l. FeCl3 with optimum dosage of coagulant is 300mg coag/ m3dye w.w and flocculent is
2 mg floc../ m3dye w.w and optimum pH 7 can remove 98% turbidity.

i
ABSTRAK

KAJIAN KEBERKESANAN ALUMINUM SULFAT, POLIALUMINUM


KLORIDA DAN FERRIC KLORIDA UNTUK KOAGULASI DALAM
PENGOLAHAN TEKSTIL LIMBAH CAIR.

Tiga jenis koagulan kimia, Aluminium Sulfat (Alum), Polyaluminum Chloride (PAC)
dan Ferric Klorida (FeCl3) telah digunakan untuk mengkaji keberkesanan dari proses
koagulasi dan flokulasi untuk menghilangkan kekeruhan, keperluan oksigen pepejal
terlarut daripada air sisa tekstil. Konsentrasi awal air sisa tekstil sintetik adalah 1.0 g /
l dengan kekeruhan awal adalah 24.3 NTU. Koagulasi bersama polyacrylmide untuk
menambah flokulasi. Dos optimum Alum boleh mengurangkan kekeruhan sehingga
96% ialah 4500 coag/ m3dye w.w dengan pH optimumnya adalah 6.5 boleh menghilangkan
kekeruhan hingga 97%. Penambahan 5 floc.. / m3dye w.w polyacrylmide sebagai bantuan
flokulasi dapat meningkatkan kadar penghapusan kekeruhan hingga 98%. Setelah
proses flokulasi, kandungan DO dan COD juga mengurangkan dari 9.67 mg / l untuk
pH 7 dan dari 5.5 mg / l menjadi 1.6 mg / l. Polyaluminum Klorida juga berkesan
dalam penghapusan kapasiti tercemar, dengan menggunakan 250 / m3dye
coag w.w

koagulan PAC dengan penyesuaian ph 6.5 dengan optimum dos dan pH dengan
meningkatkan penghapusan kekeruhan kepada 96%. COD telah menurun kepada 0
mg /l dan DO menurun kepada 7.6 mg / l. FeCl 3 dengan dos optimum pH koagulan
dan flocculent dan optimum dapat menghilangkan kekeruhan 98%.

ii

You might also like