Professional Documents
Culture Documents
EN19 - 709M40
EN19 - 709M40 Black (As rolled, forged or heat treated) (ALLOY STEEL) (Direct hardening or nitriding) (Chromium/Moly)
Equivalents: BS970 Part 1 1983, 709M40 BS970 of 1955 EN19 German W. Stoff No. 1.7225 | American AISI 4140 Chemical: Composition % Carbon = 0,36 - 0,44 Silicon = 0,10 - 0,35 Manganese = 0,70 - 1,00 Chromium = 0,90 - 1,20 Molybdenum = 0,25 - 0,35 Sulphur = 0,035 max
Rolled
Heat Treated
Phosphorus
= 0,040 max
Characteristics: A 6% allowance should always be made for removal of surface defects during machining Machinability good Ideal for 60 ton tensile applications up to 100mm max. Sizes above limited ruling section will be heat treated to a hardness only, with no guarantee on mechanical properties Weldable Typical Applications: Axles Drive Shafts Crankshafts Connecting Rods High Tensile Bolts Studs Propeller Shaft Joints Rifle Barrels Breech Mechanisms for Small Arms Induction Hardened Pins
Mechanical Properties
Heat Treatment
R S T U V W
RP 0,2 MPA
480 540 570 665 740 835 925
Hardness HB
201/255 223/277 223/277 248/302 269/331 293/352 311/375
Tel: +27 (0)11 865 4939. Fax: +27 (0)11 902 8995. e-mail: sales@specialsteels.co.za