Professional Documents
Culture Documents
..
Q1:
T(on)
V(dc)
T(off)
T
Formula : V(dc)=(T(on)/T)*V
Frequency=2khz (it is fixed) V=15 (remain fixed) V(dc)=10 (amplitude of waveform and can be varied according to situation) T=time period depending upon frequency T(on)=time period when pulse is on T(off)= time period when pulse is off Compute T(on) from the above equation and difference of T(on) with total time period T will give us T(off). At last plot fft of this waveform.
Q:2 Using all above data and same formula but T(on) for pulse in Q:1 becomes T(off) in this question and vice versa. And plot fft of the wave form.
T(off)
V(dc)
T(on)
T
Q:3 20ms
V(m)
10ms Figure 1
Generate a full rectified waveform Frequency = 50Hz so that to achieve time period of 20ms as shown above.
20ms V(dc)
10ms
figure 2
V(dc)=(2*V(m))(1+cos )
V(m)=15 (is fixed value) V(dc)=10 (can be varied) =3.14 Compute from the above equation so that to generate phase as we generated a week earlier but this is full rectified and frequency is 50Hz. At last plot fft of figure 2.