Professional Documents
Culture Documents
ms_office
RNC V200R009
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please c headquarters.
http://www.huawei.com support@huawei.com
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Te
Notice
The information in this document is subject to change without notice. Every effort has been made in the preparation of this documen
4/11/2012
12167
92159804.xls.ms_office
pport and service. For any assistance, please contact our local office or company
s been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this docume
4/11/2012
22167
92159804.xls.ms_office
ation, and recommendations in this document do not constitute the warranty of any kind, express or implied.
4/11/2012
32167
92159804.xls.ms_office
Purpose
This describes RNC parameters, including the meaning, values, and usage of RNC parameters.
Version
The product version related to this document is: BSC6810 V200R011C00SPC100.
Intended Audience
Network planners Field engineers System engineers Shift operators
Organization
Each parameter is described in the following aspects. Description Parameter ID Parameter Name MML Command NE Meaning Value Type GUI Value Range Actual Value Range Unit Default Value Recommended Value Impact Parameter Relationship Service Interrupted After Modification Interruption Scope Interruption Duration (min) Caution
4/11/2012
42167
4/11/2012
52167
92159804.xls.ms_office
cribed in the following aspects. Remarks Simple string for identifying a parameter Full name of the parameter Commands for setting the parameter, and optional/mandatory attribute of the parameter in each command NEs on which the parameter is set Functions, functioning ways, and protocols of the parameter Parameter value type Parameter value range displayed on the GUI Actual parameter value range corresponding to the GUI Value Range. For example, the GUI Value Range is 0, and the corresponding Actual Value Range is OFF. Parameter value unit Initial value provided by the system Values recommended in different scenarios Parameter impact scope, that is, objects specified when the parameter is set Relationship between this parameter and other parameters. For example, to use this parameter, you need to set related switches and parameters. Whether modifying the parameter value may interrupt the existing services Possible interruption scope in the case that modifying the parameter value may interrupt the existing services Possible interruption duration in the case that modifying the parameter value may interrupt the existing services Cautions to be taken during the modification
4/11/2012
62167
92159804.xls.ms_office Whether this parameter is read/write or read only Whether this parameter is a radio parameter, a transport parameter, or an equipment parameter Version in which this parameter is introduced
4/11/2012
72167
Parameter ID AAL2PATHT AbsTime Ac09ToAsc Ac10ToAsc Ac11ToAsc Ac12ToAsc Ac13ToAsc Ac14ToAsc Ac15ToAsc AccessServiceClass
Parameter Name AAL2 Path Type Specify Time AC 0~9 to ASC mapping AC 10 to ASC mapping AC 11 to ASC mapping AC 12 to ASC mapping AC 13 to ASC mapping AC 14 to ASC mapping AC 15 to ASC mapping Access service class
MML Command
NE
ADD AAL2PATH(Mandatory) RNC SET POOLPRIMHOSTPOLICY(Mandatory) RNC ADD PRACHACTOASCMAP(Optional) RNC ADD PRACHACTOASCMAP(Optional) RNC ADD PRACHACTOASCMAP(Optional) RNC ADD PRACHACTOASCMAP(Optional) RNC ADD PRACHACTOASCMAP(Optional) RNC ADD PRACHACTOASCMAP(Optional) RNC ADD PRACHACTOASCMAP(Optional) RNC ADD PRACHASC(Mandatory) RNC ADD PPPLNK(Optional) ADD MPLNK(Optional)
Address and control field compress RNC AC Restriction Interval Of Cell ACALGO(Mandatory) RNC SET Access Class Restriction interval between Cells SET DSACAUTOALGO(Mandatory) RNC
AcRange AcRestriction
Range of restrained Access Class RNC AC Restriction Indicator ADD CELLDSACMANUALPARA(Mandatory) RNC
AcRstrctIntervalLen Interval length of Domain Specific Access Class Restriction RNC AcRstrctPercent AC Restriction Percent SET ACALGO(Mandatory) RNC AcRstrctSwitch AC Restriction Switch SET ACALGO(Optional) RNC ACTOBJECT Activate Object ACT LICENSE(Optional) RNC ACTTYPE Type ACT GPS(Mandatory) RNC ACU Added CPU occupancy STR CPUUSAGETST(Mandatory) RNC AFSetObj AFSetObj SET ADMCTRL(Mandatory) RNC AgpsActivateFlag A-GPS Method Active Flag ADD SMLCCELL(Optional)RNC AGPSAddAssDataSendFlag A-GPS Additional Data SendSET SMLC(Optional) Flag RNC AGPSMethodType A-GPS Method Type SET SMLC(Optional) RNC ADD GPS(Mandatory) ACT GPS(Mandatory) AGPSRECEIVERID GPS ID RNC
ADD GPS(Mandatory) RNC ADD CHPWROFFSET(Optional) RNC ADD AICH(Optional) RNC SET ALMLVL(Mandatory) SET BOXRPT(Mandatory) SET ALMPORT(Optional)
Alarm ID align type Bandwidth Allocate Code Mode GPS antenna altitude GPS antenna altitude Alarm Severity
RNC SET HSSCCHLESSOPPARA(Mandatory) RNC ADD RSCGRP(Mandatory) RNC ADD CELLHSDPA(Optional) RNC ADD GPS(Mandatory) RNC ADD GPS(Mandatory) RNC SET ALMLVL(Mandatory) RNC
AmntOfRpt2B
RNC
AmntOfRpt2C
RNC
AmntOfRpt3A
RNC
AmntOfRpt3C 3C event retry max times RNC AmRlcCfgPara RLC AM mode parameters selection ADD TYPRABRLC(Mandatory) RNC AMRQosPerform QOS Switch For AMR Traffic QOSACT(Optional) RNC SET AmrRabAbnormRelRatioThd AMR call drop ratio Per Spu SET KPIALMTHD(Optional) RNC AmrRabEstabAttMinNum The minimum of AMR Rab attempt setup Per Spu SET KPIALMTHD(Optional) RNC AmrRabEstabSuccRatioThd AMR Rab successful setup ratio Per Spu SET KPIALMTHD(Optional) RNC AmrRabRelMinNum The number of AMR drop Per Spu SET KPIALMTHD(Optional) RNC
AmrUlRateAdjTimerLen
RNC
ADD ADJNODE(Mandatory) ADD AAL2PATH(Mandatory) ADD AAL2RT(Mandatory) ADD ADJMAP(Mandatory) ADD IPPATH(Mandatory) ADD IPPATHBIND(Mandatory) ACT IPPM(Mandatory) ACT VCLCC(Mandatory) LOP VCL(Mandatory)
AntennaLatitudeDegree
ADD SMLCCELL(Optional)RNC
ADD SMLCCELL(Optional)RNC
AntennaLongitudeDegree Cell Antenna Longitude AntennaLongitudeDegreeSecCell Antenna Longitude AntennaOpening Cell Antenna Opening AntennaOrientation Cell Antenna Orientation
ADD SMLCCELL(Optional)RNC ADD SMLCCELL(Optional)RNC ADD SMLCCELL(Mandatory) RNC ADD SMLCCELL(Mandatory) RNC
APFlag APP AppliedDirect AREAFLAG AREAFLAG ARP10Priority ARP11Priority ARP12Priority ARP13Priority ARP14Priority ARP1Priority ARP2Priority ARP3Priority ARP4Priority ARP5Priority ARP6Priority ARP7Priority
APFlag ADD NRNCCELL(Optional)RNC Application type ADD SCTPLNK(Mandatory) RNC RAB applied direction ADD TYPRABBASIC(Mandatory) RNC Area flag SYN BRDAREA(Optional) RNC Area flag LOD PATCH(Optional) RNC User_priority of Allocation/Retention priority 10 SET USERPRIORITY(Optional) RNC User_priority of Allocation/Retention priority 11 SET USERPRIORITY(Optional) RNC User_priority of Allocation/Retention priority 12 SET USERPRIORITY(Optional) RNC User_priority of Allocation/Retention priority 13 SET USERPRIORITY(Optional) RNC User_priority of Allocation/Retention priority 14 SET USERPRIORITY(Optional) RNC User_priority of Allocation/Retention priority 1 SET USERPRIORITY(Optional) RNC User_priority of Allocation/Retention priority 2 SET USERPRIORITY(Optional) RNC User_priority of Allocation/Retention priority 3 SET USERPRIORITY(Optional) RNC User_priority of Allocation/Retention priority 4 SET USERPRIORITY(Optional) RNC User_priority of Allocation/Retention priority 5 SET USERPRIORITY(Optional) RNC User_priority of Allocation/Retention priority 6 SET USERPRIORITY(Optional) RNC User_priority of Allocation/Retention priority 7 SET USERPRIORITY(Optional) RNC
User_priority of Allocation/Retention priority 8 SET USERPRIORITY(Optional) RNC User_priority of Allocation/Retention priority 9 SET USERPRIORITY(Optional) RNC ARP packet resend times STR IPCHK(Optional) RNC ARP packet time-out STR IPCHK(Optional) RNC The ATM Logic Port Number STR NODEBBWRPT(Mandatory) RNC NodeB ATM_TRANS Slot No. NODEBIP(Mandatory)RNC ADD NodeB ATM_TRANS Subrack No. ADD NODEBIP(Mandatory)RNC Attach/detach indication ADD CNDOMAIN(Optional) RNC ADD PPPLNK(Mandatory) ADD MPGRP(Mandatory)
AUTHMODE
RNC
AUTHNAME
RNC
AUTHPWD
RNC
AUTHTYPE
RNC
AUTO Auto negotiation SET ETHPORT(Optional) RNC AvailablesignatureEndIndex Available signature end index ADD PRACHASC(Optional)RNC AvailablesignatureStartIndexAvailable signature start index ADD PRACHASC(Optional)RNC AvailableSubchannelCtrlWord Available subchannel controlADD PRACHASC(Optional)RNC word AvailCap Capability of CN Node ADD CNNODE(Mandatory) RNC AVOL Alarm VOL. SET ALMPORT(Optional) RNC BACK8KCLKSW1 Output Switch of backplane 8K OutClock 1 SET CLK(Optional) RNC BACK8KCLKSW2 Output Switch of backplane 8K OutClock 2 SET CLK(Optional) RNC BackgroundNoise Background noise ADD CELLCAC(Optional) RNC BACKUPPATH Path of Backup File BKP DB(Optional) RNC BAKIP Backup port IP address STR IPCHK(Optional) RNC BAKMASK Backup port mask STR IPCHK(Optional) RNC BAMIP BAM External Network Virtual IP EMSIP(Optional) ADD RNC BAMMASK BAM External Network Mask ADD EMSIP(Optional) RNC ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Man datory) ADD GSMCELL(Optional) ADD NRNCCELL(Mandatory) BandInd Band indicator RNC BandWidthForFACH Bandwidth of Fach SET FACHBANDWIDTH(Optional) RNC BCC BS color code ADD GSMCELL(Mandatory) RNC
Inter-RAT cell frequency number GSMCELL(Mandatory) ADD RNC BCCH HS-PDSCH power ADD CELLEFACH(Optional) RNC BCCH HS-SCCH power ADD CELLEFACH(Optional) RNC BCH transmit power ADD BCH(Optional) RNC
BearType Bear Type SET USERGBR(Mandatory)RNC BEARTYPE DSP bear type ADD N7DPC(Mandatory) RNC BeatDectThred HeatBeat Lost Times Threshold RNCPOOL(Optional) RNC ADD BeatRecvrThred HeatBeat Recover Times Threshold ADD RNCPOOL(Optional) RNC BeatSendingDis HeatBeat Sending Time Interval RNCPOOL(Optional) RNC ADD BeBitRateThd BE service handover rate threshold SET HOCOMM(Optional) RNC BeCpc2EFachStateTransTimer CPC to E_FACH Transition Timer BE SET UESTATETRANSTIMER(Optional) RNC BeCpc2FStateTransTimer BE CPC to FACH TransitionSET UESTATETRANSTIMER(Optional) Timer RNC BeD2EFachStateTransTimer BE DCH to E_FACH Transition Timer SET UESTATETRANSTIMER(Optional) RNC BeD2FStateTransTimer BE DCH to FACH Transition Timer SET UESTATETRANSTIMER(Optional) RNC
BeDlAct1
RNC
BeDlAct2
RNC
BeDlAct3 BeE2FStateTransTimer
Third Action For BE Downlink QOS SET QOSACT(Optional) RNC BE E-DCH To FACH State Transition Timer SET UESTATETRANSTIMER(Optional) RNC
BeEFach2CpcTvmThd BE E_FACH2CPC 4A Threshold UESTATETRANS(Optional) SET RNC BeEFach2CpcTvmTimeToTrig E_FACH2CPC 4A Time SET UESTATETRANS(Optional) BE RNC
BeEFach2DTvmThd BE E_FACH2D 4A Threshold UESTATETRANS(Optional) SET RNC BeEFach2DTvmTimeToTrigBE E_FACH2D 4A Time SET UESTATETRANS(Optional) RNC
BeEFach2HTvmThd BE E_FACH2HS-DSCH 4A SET UESTATETRANS(Optional) Threshold RNC BeEFach2HTvmTimeToTrigBE E_FACH2HS-DSCH 4A SET UESTATETRANS(Optional) Time RNC BeF2CpcETvmThd BE F2CPC_E-DCH 4A ThresholdUESTATETRANS(Optional) SET RNC BeF2CpcETvmTimeToTrig BE FACH2CPC_E-DCH 4A SET UESTATETRANS(Optional) Time RNC
BeF2CpcHTvmThd BE F2CPC_HS-DSCH 4A Threshold SET UESTATETRANS(Optional) RNC BeF2CpcHTvmTimeToTrig BE F2CPC_HS-DSCH 4A Time UESTATETRANS(Optional) SET RNC
BeF2DTvmThd
BE F/R2D 4A Threshold
BE F/R2D 4A Time SET UESTATETRANS(Optional) RNC BE F2E-DCH 4A Threshold SET UESTATETRANS(Optional) RNC BE F2E-DCH 4A Time SET UESTATETRANS(Optional) RNC
BeF2HTvmThd BE F2HS-DSCH 4A Threshold UESTATETRANS(Optional) SET RNC BeF2HTvmTimeToTrig BE F2HS-DSCH 4A Time SET UESTATETRANS(Optional) RNC BeF2PStateTransTimer BE FACH to PCH TransitionSET UESTATETRANSTIMER(Optional) Timer RNC BeH2EFachStateTransTimer BE HSPA to E_FACH Transition UESTATETRANSTIMER(Optional) SET Timer RNC BeH2FStateTransTimer BE HS-DSCH to FACH Transition Timer SET UESTATETRANSTIMER(Optional) RNC BeH2FTvmPTAT BE HS-DSCH2F 4B PendingSET UESTATETRANS(Optional) Time RNC
BE HS-DSCH2F 4B Threshold UESTATETRANS(Optional) SET RNC BE HS-DSCH2F 4B Time SET UESTATETRANS(Optional) RNC Rate threshold of BE on 2ms SET of HSUPA TTI FRC(Optional) RNC Timer For BE Inter Iur Rate SET QOSACT(Optional) RNC ADD CELLDCCC(Optional) BE Event F Reporting PowerSET DCCC(Optional) Margin RNC QOS Switch For BE Traffic SET QOSACT(Optional) RNC Reference BetaC ADD TYPRABBASIC(Mandatory) RNC Reference BetaD ADD TYPRABBASIC(Mandatory) RNC
BeUlAct1
RNC
BeUlAct2
RNC
Third Action For BE Uplink QOS QOSACT(Optional) SET Indicator For BE Uplink QOS Event SET QOSACT(Optional) Measurement Of 5A Switch SET QOSACT(Optional) Measurement Of 6A1 SwitchSET QOSACT(Optional) Measurement Of 6D Switch SET QOSACT(Optional)
Wait Timer For BE Uplink Rate QOSACT(Optional) RNC SET detect multiplier of BFD packet IPCHK(Optional) STR RNC Background MAC-c flow GBR ADD CELLEFACH(Optional) RNC Background MAC-c flow MBR CELLEFACH(Optional) ADD RNC
BgnAbnormalThd BGNAdjustTimeLen
Background noise abnormal threshold ADD CELLCAC(Optional) RNC Background noise update continuance time ADD CELLCAC(Optional) RNC
BgnEndTime BGNEqUserNumThd
Background noise update endADD CELLCAC(Mandatory) time RNC Equivalent user number threshold for background noise RNC ADD CELLCAC(Optional)
BgnStartTime BGNSwitch
Background noise update start timeCELLCAC(Mandatory) ADD RNC Auto-adaptive background noise update switch ADD CELLCAC(Optional) RNC
BgnUpdateThd BLERQuality
Background noise update trigger threshold ADD CELLCAC(Optional) RNC Target value of service DCH_BLER ADD TYPRABOLPC(Mandatory) RNC
BlindHoFlag Blind handover flag RNC BlindHOIntrafreqMRAmount Intrafrequency measurement report amount of blind handover SET INTRAFREQHO(Optional) RNC BlindHOIntrafreqMRIntervalIntrafrequency measurement report interval of blind HO RNC SET INTRAFREQHO(Optional)
BlindHOPrio
BlindHOQualityCondition
1F event blind handover trigger condition RNC Blocking request timer SET AAL2TMR(Optional) RNC Report Flag SET BOXRPT(Mandatory) RNC Board class ADD BRD(Mandatory) RNC Board type ADD BRD(Optional) RNC Board type. SET ETHPORT(Mandatory) RNC Board type ADD PPPLNK(Mandatory) RNC Board type ADD MPLNK(Mandatory) RNC
ADD CELLINTERRATHONCO V(Optional) ADD CELLINTERRATHOCOV (Optional) SET INTERRATHONCOV(Opt ional) SET INTERRATHOCOV(Optio nal) ADD CELLMBDRINTERRAT( Optional)
BSICVerify BT BT BT BT BT BT BT BT BT BT BWADJ
BSIC verify switch RNC Board type SET E1T1LOP(Mandatory) RNC Board type LOP E1T1(Mandatory) RNC Board type STR E1T1TST(Mandatory) RNC Board type LOD PATCH(Mandatory) RNC Board type SET CLK(Mandatory) RNC Board type SET E1T1(Mandatory) RNC Board type SET CPUTHD(Mandatory) RNC Board Type ADD IMAGRP(Mandatory) RNC Board type SET OPT(Mandatory) RNC Board type ADD ATMLOGICPORT(Optional) RNC Auto adjust bandwidth switch ADD IPLOGICPORT(Optional) RNC
ADD PPPLNK(Optional) ADD IMAGRP(Optional) ADD FRALNK(Optional) ADD UNILNK(Optional) ADD MPGRP(Optional)
BWDCONGBW
RNC
BWDCONGBW BWDCONGBW
Backward congestion threshold ADD IPLOGICPORT(Optional) RNC Backward congestion threshold ADD ATMLOGICPORT(Optional) RNC
BWDCONGBW
BWDCONGBW
RNC
BWDCONGBW
RNC
ADD PPPLNK(Optional) ADD IMAGRP(Optional) ADD FRALNK(Optional) ADD UNILNK(Optional) ADD MPGRP(Optional)
BWDCONGCLRBW
RNC
BWDCONGCLRBW BWDCONGCLRBW
Backward congestion clear threshold ADD IPLOGICPORT(Optional) RNC Backward congestion clear threshold ADD ATMLOGICPORT(Optional) RNC
BWDCONGCLRBW
BWDCONGCLRBW
RNC
BWDCONGCLRBW
RNC
ADD PPPLNK(Optional) ADD MPGRP(Optional) ADD UNILNK(Optional) ADD FRALNK(Optional) ADD IMAGRP(Optional)
BWDHORSVBW
RNC
BWDHORSVBW BWDHORSVBW
Backward handover reserved ADD IPLOGICPORT(Optional) bandwidth RNC Backward handover reserved ADD ATMLOGICPORT(Optional) bandwidth RNC
BWDHORSVBW
BWDHORSVBW
RNC
Backward handover reserved ADD RSCGRP(Optional) RNC bandwidth Max bandwidth estimate ratio ADD IPLOGICPORT(Optional) RNC Bandwidth Mode ADD RSCGRP(Mandatory) RNC Load Control algorithm BandWidthIPLOGICPORT(Optional) ADD THD RNC
CacSwitch
Call Shock Control Switch SET CALLSHOCKCTRL(Optional) RNC Call Shock Judge Period timeSET CALLSHOCKCTRL(Optional) length RNC Indicator of Carrier Type Priority USERPRIORITY(Optional) SET RNC Bearing subrack No. ADD AAL2PATH(Mandatory) RNC Carry Flag ADD IPPATH(Optional) RNC
CARRYFRAATMLNKN
RNC
CARRYIMAGRPN CARRYLNKT
Bearing IMA group No. Bearing link type ADD NCP(Mandatory) ADD CCP(Mandatory)
RNC RNC
CARRYNCOPTN CARRYPN
Bearing slot No. RNC Bearing subrack No. ADD SAALLNK(Mandatory) RNC The bearing type of the logic ADD IPLOGICPORT(Mandatory) port RNC The bearing type of the logical portATMLOGICPORT(Mandatory) ADD RNC
CARRYT
Bearing type
RNC
CARRYUNILNKN
Bearing UNI link No. ADD SAALLNK(Mandatory) ADD IPOAPVC(Optional) ADD SAALLNK(Mandatory) ADD IPOAPVC(Optional)
RNC
CARRYVCI
Bearing VCI
RNC
CARRYVPI
Bearing VPI
RNC
ADD IPOAPVC(Mandatory) ADD SAALLNK(Mandatory) ADD AAL2PATH(Mandatory) CARRYVPN CBCIPADDR CBCMASK CBS CBSOpIndex Bearing ATMLGCPORT port No. RNC CBS CBC IP address ADD CBSADDR(Mandatory) RNC Subnet mask ADD CBSADDR(Mandatory) RNC Consent burst size ADD IPLOGICPORT(Optional) RNC CBS Operator Index ADD QUICKCELLSETUP(Mandatory) RNC ADD CELLCBSSAC(Mandatory ) ADD QUICKCELLSETUP(Man CBS SAC RNC datory) CB Switch SET RNCCBPARA(Optional) RNC CCCH MAC-c flow GBR ADD CELLEFACH(Optional) RNC CCCH MAC-c flow MBR ADD CELLEFACH(Optional) RNC
CCHPRIPATH CCHPRITH
Common channel primary path ADD TRMMAP(Optional) RNC Common channel pri path load threshold ADD LOADEQ(Optional) RNC
Common channel secondary path TRMMAP(Optional) ADD Common channel pri sec path load LOADEQ(Optional) ADD ratio threshold CCM Send Prid ADD ETHMA(Optional) Activation mode ACT VCLCC(Optional)
Timer_CC ADD SAALLNK(Optional) RNC Cell delay variation toleranceADD ATMTRF(Optional) RNC AMR_RRC Number per Second for Cell SET CALLSHOCKCTRL(Optional) RNC Cell Average Altitude ADD SMLCCELL(Optional)RNC Cell Average Altitude ADD SMLCCELL(Optional)RNC
CellCenterLatitude CellCenterLatitudeSec
CellCenterLongitude
ADD SMLCCELL(Optional)RNC
Cell Center Longitude Target cell choice Cell Environment Case Cell environment type
CellHeightStd
Cell Altitude Standard Deviation SMLCCELL(Optional)RNC ADD HiPri_RRC Number per Second for Cell SET CALLSHOCKCTRL(Optional) RNC Cell Host Type ADD NRNCCELL(Optional)RNC
CellName
ADD CELLSETUP(Mandatory) ADD GPS(Mandatory) ADD CELLCMCF(Mandatory) ADD CELLINTRAFREQHO(Ma ndatory) ADD CELLQOSHO(Mandatory) ADD GSMNCELL(Mandatory) ADD CELLINTERFREQHOCO V(Mandatory) ADD CELLINTERFREQHONC OV(Mandatory) ADD CELLHOCOMM(Mandator y) ADD CELLINTERRATHOCOV (Mandatory) ADD CELLINTERRATHONCO V(Mandatory) ADD INTERFREQNCELL(Man datory) ADD INTRAFREQNCELL(Man datory) Cell ID RNC ADD Cell ID Changing Period time length SET CIDCHG(Optional) RNC Cell ID Changing Switch SET CIDCHG(Optional) RNC CELLID+RTT Method Active FlagSMLCCELL(Optional)RNC ADD CELLID+RTT Method Type SET SMLC(Optional) RNC Cell LDR SF reserved threshold CELLLDR(Optional) RNC ADD Cell Location Setting Type ADD SMLCCELL(Mandatory) RNC ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Man datory) ADD NRNCCELL(Mandatory) Cell name RNC
CellOverrunThd CellReSelectCounter
Cell overload threshold ADD CELLLDB(Optional) RNC Cell Reselection Counter Threshold SET UESTATETRANS(Optional) RNC
CellReSelectTimer Cell Reselection Timer SET UESTATETRANSTIMER(Optional) RNC CellReservationExtension Cell reservation extension ADD CELLACCESSSTRICT(Optional) RNC CellReservedForOperatorUseCell reserved for operator useADD CELLACCESSSTRICT(Optional) RNC
CellsForbidden1A
CellsForbidden1B CellTotalRrcNumThd
Affect 1B threshold flag ADD INTRAFREQNCELL(Optional) RNC Cell Call Shock Trigger ThresholdCALLSHOCKCTRL(Optional) SET RNC
CellUnderrunThd
CfgRacInd
ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Man datory) ADD NRNCCELL(Mandatory) ADD GSMCELL(Mandatory) RAC Configuration Indication
RNC
Channel configuration strategy switch SET CORRMALGOSWITCH(Optional) RNC Channel Retry Ho Timer Length COIFTIMER(Optional) RNC SET Channel Retry Timer Length SET COIFTIMER(Optional) RNC Channel code type ADD FACH(Optional) RNC Ping Check Timeout Counts ADD IPPATH(Optional) RNC Channel Index SET MBMSPERF(Mandatory) RNC ADD IPPATHBIND(Mandatory) STR IPCHK(Optional)
Check Index Calculate checksum when receive message ADD SCTPLNK(Optional) Calculate checksum when send message ADD SCTPLNK(Optional) Checksum arithmetic ADD SCTPLNK(Optional)
CHKTYPE
STR IPCHK(Mandatory) SET LDM(Optional) ChoiceRprtUnitForDlBasicMeas unit for DL basic meas SETcycle Time rprt SATLDM(Optional) SET LDM(Optional) ChoiceRprtUnitForDlOlcMeas Time unit for DL OLC meas SETcycle rprt SATLDM(Optional) SET LDM(Optional) SET SATLDM(Optional) ChoiceRprtUnitForHsdpaPwrMeasunit of HSDPA need pwr meas cycle Time SET LDM(Optional) ChoiceRprtUnitForHsdpaRateMeas Time unit of HSDPA bit rate SET SATLDM(Optional) meas cycle ChoiceRprtUnitForHsupaRateMeas Time unit of HSUPA bit rate SET LDM(Optional) meas cycle
Check type
ChoiceRprtUnitForUlBasicMeas unit for UL basic meas rprt cycle Time SET LDM(Optional) ChoiceRprtUnitForUlOlcMeas Time unit for UL OLC meas SETcycle rprt SATLDM(Optional)
RNC RNC
ChoiceRptUnitForAmrE
ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional ) AMR Reporting Period Unit For Event E RNC ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional ) BE Reporting Period Unit For Event E RNC ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional ) BE Reporting Period Unit For Event F RNC
ChoiceRptUnitForBeE
ChoiceRptUnitForBeF
CIO
ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional ) VP Reporting Period Unit For Event E RNC Channel Switch SET MBMSPERF(Mandatory) RNC GSM cell ID ADD GSMCELL(Mandatory) RNC ADD CELLSETUP(Optional) ADD Cell oriented Cell IndividualNRNCCELL(Optional) Offset RNC
CIO
CIOOffset
Neighboring cell oriented CIO RNC Bandwidth ADD IPLOGICPORT(Mandatory) RNC Clock board type SET CLKTYPE(Mandatory) RNC Closed loop time adjust modeADD CELLSETUP(Optional) indication RNC
CmCap
CmcfCellType
CM cell type
RNC
CmcfSwitch CmchRsrcRspTmr
CMCF algorithm switch SET CORRMALGOSWITCH(Optional) RNC CMCH RSRC response timerSET STATETIMER(Optional) RNC
CmpSwitch
Compatibility switch
SET CORRMALGOSWITCH(Optional) RNC ADD CNDOMAIN(Mandatory) ADD CELLRLPWR(Mandatory) ADD TYPRABBASIC(Mandator y) ADD CNNODE(Mandatory) RST IURESOURCE(Mandatory) RST IU(Mandatory) RNC
CNDomainId
CN domain ID
ADD CNNODE(Mandatory) SET IUTIMERANDNUM(Man datory) ADD NRIGLBCNIDMAP(Mand atory) ADD IMSIIDNNSCNIDMAP(M andatory) RST IU(Mandatory) RST IURESOURCE(Mandatory) RNC CN node ID Status of CN Node ADD CNNODE(Mandatory) RNC Resource Management ModeADD ADJMAP(Mandatory) RNC Cn Operator Index ACT LICENSE(Optional) RNC Cn Operator Name ADD CNOPERATOR(Mandatory) RNC Cn Operator Group Index ADD CNOPERGROUP(Mandatory) RNC
ADD NRNCCELL(Mandatory) ADD GSMCELL(Mandatory) ADD QUICKCELLSETUP(Man datory) ADD CELLSETUP(Mandatory) CnOpGrpIndex CnOpGrpName CnOpIndex CN Operator Group Index Cn Operator Group Name Cn Operator Index RNC ADD CNOPERGROUP(Mandatory) RNC ADD NRNCURA(Mandatory) RNC
ADD CNOPERATOR(Mandator y) ADD RSCGRP(Mandatory) ADD ADJMAP(Mandatory) ADD IPLOGICPORT(Mandatory ) ADD ATMLOGICPORT(Option al) ADD CZ(Mandatory) RST IU(Mandatory) RST IURESOURCE(Mandatory) ADD CELLCBSSAC(Mandatory ) SET IUTIMERANDNUM(Man datory) ADD CNNODE(Mandatory) ADD NRIGLBCNIDMAP(Mand atory) ADD IMSIIDNNSCNIDMAP(M andatory) ADD RNCCBCPUID(Mandatory CnOpIndex Cn Operator Index RNC ) CnOpIndex1 Operator 1 Index ADD CNOPERGROUP(Mandatory) RNC CnOpIndex2 Operator 2 Index ADD CNOPERGROUP(Mandatory) RNC CnOpIndex3 Operator 3 Index ADD CNOPERGROUP(Mandatory) RNC CnOpIndex4 Operator 4 Index ADD CNOPERGROUP(Mandatory) RNC CnOpIndexComm Common Operator Index ADD CNOPERGROUP(Optional) RNC CnOpNum Operator Number ADD CNOPERGROUP(Mandatory) RNC CNProtclVer CN protocol version ADD CNNODE(Mandatory) RNC CodeAdjForHsdpaSwitch Code Adjust Switch for HSDPA CELLHSDPA(Optional) ADD RNC CodeAdjForHsdpaUserNumThd Number for Code Adjust for HSDPA User ADD CELLHSDPA(Optional) RNC
RNC
RNC
CodeBalancingDrdSwitch Code balance drd switch RNC CodeCongSelInterFreqHoIndCode congestion select inter-freq indication ADD CELLLDR(Optional) RNC CodeScheme Code Scheme SET RNCCBPARA(Optional) RNC
CoexistMeasThdChoice CombNCellPercent
InterFreq and InterRat coexist measure threshold choice RNC Combine Neighbour Cell Percent RNCMBMSPARA(Optional) SET RNC ADD CELLDCCC(Optional) SET DCCC(Optional) Comb Event F Reporting Power Margin RNC Comm Plmn Using Type SET OPERATORSHARINGMODE(Optional) RNC Timer T1 ADD SAALLNK(Optional) RNC Timer T2 ADD SAALLNK(Optional) RNC Timer T3 ADD SAALLNK(Optional) RNC Recover threshold of queue 0ADD PORTFLOWCTRLPARA(Optional) RNC Recover threshold of queue 1ADD PORTFLOWCTRLPARA(Optional) RNC Recover threshold of queue 2ADD PORTFLOWCTRLPARA(Optional) RNC Recover threshold of queue 3ADD PORTFLOWCTRLPARA(Optional) RNC
CONGCLRTHD4
Recover threshold of queue 5ADD PORTFLOWCTRLPARA(Optional) RNC Congestion threshold of queue 0 PORTFLOWCTRLPARA(Optional) ADD RNC Congestion threshold of queue 1 PORTFLOWCTRLPARA(Optional) ADD RNC Congestion threshold of queue 2 PORTFLOWCTRLPARA(Optional) ADD RNC Congestion threshold of queue 3 PORTFLOWCTRLPARA(Optional) ADD RNC
CONGTHD4
CONGTHD5 ConnCellBarred
Congestion threshold of queue 5 PORTFLOWCTRLPARA(Optional) ADD RNC Cell barred indicator for SIB4 ADD CELLACCESSSTRICT(Mandatory) RNC
ConnectFailRrcRedirSwitch RRC redirect switch SET DRD(Optional) RNC ConnIntraFreqReselection Intra-freq cell reselection ind ADD CELLACCESSSTRICT(Optional) for SIB4 RNC CONNPWR Is connecting power monitor ADD SUBRACK(Optional) RNC
ConnQhyst1s
ConnQhyst2s
ConnQoffset1sn
ConnQoffset1sn
RNC
ConnQoffset2sn ConnSintersearch ConnSintrasearch ConnTbarred Constantvalue CONTEXTTYPE CONTPING ConverDlMBR ConverUlMBR CONVGBR CONVMBR
ConnQoffset2sn RNC Inter-freq cell reselection threshold CELLSELRESEL(Optional) ADD for connect mode RNC Intra-freq cell reselection threshold CELLSELRESEL(Optional) ADD for connect mode RNC Time barred for SIB4 ADD CELLACCESSSTRICT(Optional) RNC Constant value for calculating initial TX power ADD PRACHBASIC(Optional) RNC Context Type RST IUR(Mandatory) RNC Continue ping or not PING IP(Optional) RNC Downlink maximum bit rate of Conversation SET USERMBR(Optional) RNC Uplink maximum bit rate of Conversation SET USERMBR(Optional) RNC Conversational MAC-c flow GBR CELLEFACH(Optional) ADD RNC Conversational MAC-c flow MBR CELLEFACH(Optional) ADD RNC
CopperMaxMode
RNC
Max Mode Of Narrowband AMRC For Copper Users Send PKT Count PING MAC(Optional) Count-C threshold SET CNTCHK(Mandatory) Counter check switch SET CNTCHK(Optional)
ADD CELLSETUP(Optional) ADD NRNCCELL(Optional) CP1SupInd CP1 support indicator RNC CqiDtxTimer CQI Activity Timer SET DTXDRXPARA(Optional) RNC CQIFbCkinInDTXDRXmode CQI Feedback Cycke in DTX-DRX mode SET DTXDRXPARA(Optional) RNC CRMaxNum Max number of cell reselection ADD CELLHCS(Optional) RNC CROSSIPFLAG Cross IP address available flag ADD SCTPLNK(Optional) RNC CSCONVDL R99 CS conversational service downlink factor ADD TRMFACTOR(Optional) RNC
CSCONVPRIPATH CSCONVPRITH
R99 CS conversational primary path ADD TRMMAP(Optional) RNC R99 CS conversational pri path load threshold ADD LOADEQ(Optional) RNC
R99 CS conversational secondary path ADD TRMMAP(Optional) RNC R99 CS conversational pri sec path LOADEQ(Optional) RNC ADD load ratio threshold R99 CS conversational service uplink factor ADD TRMFACTOR(Optional) RNC Max User Number of CS ACT LICENSE(Optional) RNC
CS domain Reloc GSM load THD RNC CS Information Update Switch OPERATORCFGPARA(Optional) SET RNC CS Information Update ProtectionOPERATORCFGPARA(Mandatory) SET Timer RNC
CsNriCfgMode CSNRILength
CsRestriction
Feature Supporting Mode of CS Domain SET OPERATORCFGPARA(Optional) RNC Length of CS NRI in bits SET OPERATORCFGPARA(Mandatory) RNC SET DSACAUTOALGO(Mand atory) ADD CELLDSACMANUALPA RA(Mandatory) Restriction for CS RNC
CSServiceHOSwitch CSSTRMDL
Inter-RAT CS handover switch ADD CELLHOCOMM(Optional) RNC R99 CS streaming service downlink factor ADD TRMFACTOR(Optional) RNC
CSSTRMPRIPATH CSSTRMPRITH
R99 CS streaming primary path TRMMAP(Optional) RNC ADD R99 CS streaming pri path load threshold ADD LOADEQ(Optional) RNC
R99 CS streaming secondary ADD TRMMAP(Optional) RNC path R99 CS streaming pri sec path loadLOADEQ(Optional) RNC ADD ratio threshold R99 CS streaming service uplink factor ADD TRMFACTOR(Optional) RNC
CsSwitch
CS algorithm switch
CTFC
CS voice channel type SET FRCCHLTYPEPARA(Optional) RNC CS Voice Hspa Dl Relative Delay FRC(Optional) SET RNC CS Voice Hspa Ul Relative Delay FRC(Optional) SET RNC HSUPA TTI type of CS voice traffic SET FRC(Optional) RNC CS Voice Over Hspa SupportADD NRNC(Optional) Indication RNC ADD SCCPCHTFC(Mandatory) ADD PRACHTFC(Mandatory) Calculated transport format combination RNC ADD SCCPCHBASIC(Optional) ADD PRACHBASIC(Optional) RNC CTFC length of TFCS Control plane sharing out offset CTRLPLNSHAREPARA(Optional) SET RNC Control plane sharing out threshold SET CTRLPLNSHAREPARA(Optional) RNC Slot No. ADD RSCGRP(Mandatory) RNC CM control enable switch SET CMCTRLSW(Mandatory) RNC Cross type ADD VPCLCX(Mandatory) RNC Classified Zone ID ADD CZ(Mandatory) RNC
BE D2F/R Or F/R2P 4B Threshold SET UESTATETRANS(Optional) RNC BE D2F/R 4B Pending Time SET UESTATETRANS(Optional) RNC BE D2F/R 4B Time SET UESTATETRANS(Optional) RNC 1A Rate Down Penalty Time SET DCCC(Optional) Length RNC
Period of penalty timer for SHO failure after down rate RNC SET INTRAFREQHO(Optional) DCCC Strategy SET DCCC(Optional) RNC DCCC Rate Up Fail Penalty TimeDCCC(Optional) SET Length RNC DCH Throu Meas Period SET DCCC(Optional) RNC Period Amount after trigger 4B on DCH ADD TYPRABDCCCMC(Optional) RNC Period Amount to trigger 4B ADD TYPRABDCCCMC(Optional) on DCH RNC Debugging Subnet No. SET SUBNET(Optional) RNC Default CnOperator SET OPERATORSHARINGMODE(Optional) RNC
Constant value configured bySET FRC(Optional) default RNC Default PCPICH Ec/No ADD CELLCAC(Optional) RNC Delay Time Length SET POOLPRIMHOSTPOLICY(Mandatory) RNC
DELAY
ADD IMAGRP(Optional)
RNC
DelayClass DeltaCodeOccupiedRate
DeltaQrxlevmin
RNC
Destination entity No. Destination IP address Destination IP address RMEP ID RMEP ID DGPS data report period
PING IP(Mandatory) TRC IPADDR(Mandatory) PING MAC(Mandatory) TRC MAC(Mandatory) ADD GPS(Optional)
Direction
Direction
DivCtrlField DlAmrConvAF
Softer handover combination SET HOCOMM(Optional) indication switch DL AF of R99 AMR conv service ADMCTRL(Optional) SET ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional DlAmrTrigTimeE AMR Trigger Time Of Event E ) DlBackgroundAF DL AF of R99 background serviceADMCTRL(Optional) SET SET LDM(Optional) SET SATLDM(Optional) DlBasicCommMeasFilterCoeff basic common measure filter coeff DL DlBeH2DInitialRate DL rate of HSDPA BE traffic as H2D SET FRC(Optional)
RNC RNC
SET FRCCHLTYPEPARA(Opti onal) ADD CELLFRC(Optional) DL BE traffic DCH decision threshold RNC DL BE traffic Initial bit rate SET FRC(Optional) RNC DL BE traffic threshold on HSDPA SET FRCCHLTYPEPARA(Optional) RNC
DlBeTrigTimeE
ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional BE Trigger Time Of Event E )ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional BE Trigger Time Of Event F ) SET LDM(Optional) SET DL CAC smoothing filter length SATLDM(Optional) DL common channel load reserved CELLCAC(Optional) ADD coefficient
RNC
DlCellTotalThd
DlCmMethod
DLCODENO
Reserved DL code No
DlConvAMRThd
DlConvNonAMRThd
ADD CELLLDR(Optional) ADD NODEBLDR(Optional) DlCSInterRatShouldBeHOUeNum should be HO user number DL CS RNC ADD CELLLDR(Optional) ADD NODEBLDR(Optional) DlCSInterRatShouldNotHOUeNum should not be HO user number DL CS RNC
DlDcccRateThd
RNC
DlFullCvrRate
RNC
DlGBR
DlHoCeCodeResvSf
DlHOThd DL handover access threshold ADD CELLCAC(Optional) DlHSUPARsvdFactor DL HSUPA reserved factor ADD CELLCAC(Optional) DlInteractAF DL AF of R99 interactive service ADMCTRL(Optional) SET DlInterFreqHoBWThd DL HO maximum bandwidthADD CELLLDR(Optional) DlInterFreqHoCellLoadSpaceThd load space threshold ADD CELLLDR(Optional) DL HO DlLdrAMRRateReductionRabNum DL LDR-AMR rate reduction RABCELLLDR(Optional) ADD number SET LDM(Optional) SET DlLdrAvgFilterLen DL LDR smoothing filter length SATLDM(Optional)
ADD CELLLDR(Optional) ADD NODEBLDR(Optional) DlLdrBERateReductionRabNumLDR-BE rate reduction RAB number DL RNC ADD CELLLDR(Optional) ADD NODEBLDR(Optional) DL LDR credit SF reserved threshold RNC DL LDR eighth action ADD CELLLDR(Optional) RNC ADD CELLLDR(Optional) ADD NODEBLDR(Optional)
DlLdrCreditSfResThd DlLdrEighthAction
DlLdrFifthAction
RNC
DlLdrFirstAction
RNC
DlLdrFourthAction DlLdrNinthAction
ADD CELLLDR(Optional) ADD NODEBLDR(Optional) DlLdrPsRTQosRenegRabNum LDR un-ctrl RT Qos re-nego RAB num DL RNC
DlLdrRelThd
ADD CELLLDR(Optional) ADD NODEBLDR(Optional) DlLdrSecondAction DlLdrSeventhAction DL LDR second action DL LDR seventh action RNC ADD CELLLDR(Optional) RNC ADD CELLLDR(Optional) ADD NODEBLDR(Optional)
DlLdrSixthAction DlLdrTenthAction
DlMeasFilterCoef DlMidRateCalc
DL LDR trigger threshold ADD CELLLDM(Optional) RNC DL State Trans Hysteresis threshold ADD CELLLDM(Optional) RNC Downlink Maximum NumberADD NODEBLMTPARA(Optional) of TFC RNC DL MBMS reserved factor ADD CELLCAC(Optional) RNC ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional DL TCP Measurement Filter Coefficient RNC ) Downlink Mid Bit Rate Calculate DCCC(Optional) SET Method RNC
DlMidRateThd
RNC
SET AMRC(Optional) SET AMRCWB(Optional) DlModeChangeTimerLen DL Mode Change Waiting Timer Length RNC
DlNonAmrConvAF DlOlcAvgFilterLen
DL AF of R99 non AMR conv service SET ADMCTRL(Optional) RNC SET LDM(Optional) SET DL OLC smoothing filter length SATLDM(Optional) RNC
DlOlcFTFRstrctRabNum
DlOlcFTFRstrctTimes DlOlcMeasFilterCoeff
DL OLC fast TF restrict times ADD CELLOLC(Optional) RNC SET LDM(Optional) SET DL overload measure filter coeff SATLDM(Optional) RNC
DlOlcRelThd
DlOlcTraffRelRabNum DlOlcTrigHyst
DL OLC traff release RAB numberCELLOLC(Optional) RNC ADD SET LDM(Optional) DL OLC trigger hysteresis SET SATLDM(Optional) RNC
DlOlcTrigThd
DlOtherThd
DLOVSFSF
ADD CELLLDR(Optional) ADD NODEBLDR(Optional) DlPSInterRatShouldBeHOUeNum should be HO user number DL PS RNC ADD CELLLDR(Optional) ADD NODEBLDR(Optional) DlPSInterRatShouldNotHOUeNum should not be HO user number DL PS DlQosAmrAdjSwitch Switch Of AMR Downlink Rate Adjustment SET QOSACT(Optional) DlQosAmrInterFreqHoSwitch InterFreq HO Switch For Downlink AMR SET QOSACT(Optional) DlQosAmrInterRatHoSwitchInterRat HO Switch For DownlinkQOSACT(Optional) SET AMR
DLQosMcTimerLen Down Link Qos Measure timer length RNC DlQosVpInterFreqHoSwitch InterFreq HO Switch For Downlink VP SET QOSACT(Optional) RNC DlQosWAmrAdjSwitch Switch For WAMR Downlink Rate SET QOSACT(Optional) RNC DlQosWAmrInterFreqHoSwitch InterFreq HO Switch For WAMR QOSACT(Optional) RNC SET Downlink DlQosWAmrInterRatHoSwitch InterRat HO Switch For WAMR Downlink SET QOSACT(Optional) RNC DlR99CongCtrlSwitch DL R99 Congestion Control Switch SET DPUCFGDATA(Optional) RNC DlRateDnAdjLevel Downlink Rate Decrease Adjust Level SET DCCC(Optional) RNC DlRateUpAdjLevel Downlink Rate Increase Adjust Level SET DCCC(Optional) RNC
Down Link RSCP Used-Freq THD Hyst RNC Downlink spreading factor ADD CELLRLPWR(Mandatory) RNC Dl SF limit CM ind SET CMCF(Optional) RNC
DL SF threshold RNC DL AF of SRB SET ADMCTRL(Optional) RNC DL AF of R99 Streaming service ADMCTRL(Optional) RNC SET DL streaming traffic threshold on HSDPA SET FRCCHLTYPEPARA(Optional) RNC
SET AMRC(Optional) SET AMRCWB(Optional) DlThdF2 DlTotalEqUserNum DL F2 Event Relative Threshold RNC DL total equivalent user number CELLCAC(Optional) RNC ADD ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional VP Trigger Time Of Event E RNC )
DlVpTrigTimeE
DpchDivModforMIMO
Expected diff delay guard-band IMAGRP(Optional) RNC ADD Blocked domain type ADD RNCALLCELLBLK(Mandatory) RNC Enable Door Status Alarm Reporting ADD EMU(Optional) RNC DSP code ADD N7DPC(Mandatory) RNC DPCCH Transmission Burst 1 SET DTXDRXPARA(Optional) RNC DPCCH Transmission Burst 2 SET DTXDRXPARA(Optional) RNC prefered DPCCH slot format SET FRC(Optional) for HSPA RNC DSP code ADD N7DPC(Mandatory) RNC ADD CELLSETUP(Optional) ADD NRNCCELL(Optional) DPCH diversity mode for MIMO user RNC
ADD CELLSETUP(Optional) ADD NRNCCELL(Optional) DpchPrioTxDiversityMode DPCH priority Tx diversity mode RNC
DpcMode
SET FRC(Optional)
RNC
ADD N7DPC(Mandatory) ADD M3DE(Mandatory) ADD MTP3LKS(Mandatory) ADD ADJNODE(Mandatory) ADD CNNODE(Mandatory) ADD NRNC(Mandatory) ADD MTP3RT(Mandatory)
DPX DR
ACT VCLCC(Optional)
RNC RNC
DraSwitch
DRMaxGSMNum DrncBeDlRlcQosSwitch
Drd Ec/N0 threshold RNC DRL AAL2 establishment indication timer SET STATETIMER(Optional) RNC DRL reconfiguration commitSET STATETIMER(Optional) timer RNC SET DRD(Optional) ADD CELLDRD(Optional) Max inter-RAT direct retry number RNC Drnc Parameter for BE Downlink RLC QOS SET QOSACT(Optional) RNC
Packet discard threshold of queue 0PORTFLOWCTRLPARA(Optional) ADD RNC Packet discard threshold of queue 1PORTFLOWCTRLPARA(Optional) ADD RNC Packet discard threshold of queue 2PORTFLOWCTRLPARA(Optional) ADD RNC Packet discard threshold of queue 3PORTFLOWCTRLPARA(Optional) ADD RNC
DROPPKTTHD4
DROPPKTTHD5
DrSwitch
DrxCycle
DRX Cycle
Paging DRX cycle coefficient SET FRC(Optional) RNC DRX cycle length coefficientADD CNDOMAIN(Optional) RNC UE DRX Grant Monitoring Decision SET DTXDRXPARA(Optional) RNC DRX Parameter Switch SET DTXDRXPARA(Optional) RNC ADD PPPLNK(Mandatory) ADD MPLNK(Mandatory)
DS1 DsacAutoSwitch
PING IP(Optional) SET DSCPMAP(Mandatory) ADD SCTPLNK(Optional) SET PHBMAP(Mandatory) Differentiated services code point RNC Dsp No. STR IPLOPTST(Mandatory)RNC DaylightSave SET TZ(Optional) RNC Destination link No. ADD TSCROSS(Mandatory)RNC
DSTIP Destination IP address RNC DSTMASK Destination address mask ADD IPRT(Mandatory) RNC DSTMASK Destination address mask ADD IPRTBIND(Mandatory) RNC DSTTSN Destination time slot No. ADD TSCROSS(Mandatory)RNC DtxCycle1 DPCCH Transmission Cycle SET DTXDRXPARA(Optional) 1 RNC DtxCycle2 DPCCH Transmission Cycle SET DTXDRXPARA(Optional) 2 RNC DtxDrxEnablingDelay delay time of DTX_DRX in actionFRC(Optional) SET RNC DtxLongPreamble Long DPCCH Preamble SET DTXDRXPARA(Optional) RNC Dtxvalid DTX Parameter Switch SET DTXDRXPARA(Optional) RNC DUPLEX Duplex Mode SET ETHPORT(Optional) RNC DynCellOpenJudgeTimerlen Period Timer Length For Cell Dynamic ShutDown feature RNC SET RNCCELLSHUTDOWNPARA(Optional) DynCellShutdownProtectTimerlen Timer Length For Cell Dynamic ShutDown featureRNC Protect SET RNCCELLSHUTDOWNPARA(Optional) DynCellShutDownSwitch Cell Dynamic ShutDown Switch For RNC SET RNCCELLSHUTDOWNPARA(Optional) RNC DynShutdownSwitch Cell Dynamic ShutDown Switch CELLDYNSHUTDOWN(Mandatory) ADD RNC DynShutDownType Cell Dynamic ShutDown Type ADD CELLDYNSHUTDOWN(Optional) RNC E1T1LNKN Bearing link No. ADD FRALNK(Mandatory) RNC E2FThrouMeasPeriod E-DCH Throu Meas Period SET UESTATETRANS(Optional) RNC E2FThrouPTAT E-DCH2F 4B Pending Period Amount SET UESTATETRANS(Optional) RNC E2FThrouThd E-DCH2F 4B Threshold SET UESTATETRANS(Optional) RNC E2FThrouTimeToTrig E-DCH2F 4B Period Amount SET UESTATETRANS(Optional) RNC EagchCodeNum Code Number for E-AGCH ADD CELLHSUPA(Optional) RNC ECHOIP Check IP address ADD IPPATH(Mandatory) RNC EcN0AdjStep Ec/N0 Adjustment Step SET RACHMEASUREPARA(Optional) RNC EcN0AdjTimerLen Ec/N0 Adjustment Measurement Period SET RACHMEASUREPARA(Optional) RNC
EcN0EffectTime
RNC
EcN0MaxDownAdjStep EcN0MaxUpAdjStep
Maximum Ec/N0 Down Step SET RACHMEASUREPARA(Optional) RNC Maximum Ec/N0 Up Step SET RACHMEASUREPARA(Optional) RNC
EcN0Ths
Ec/N0 threshold
RNC
EDAY EdchMacdPduSize1 EdchMacdPduSize10 EdchMacdPduSize11 EdchMacdPduSize12 EdchMacdPduSize2 EdchMacdPduSize3 EdchMacdPduSize4 EdchMacdPduSize5 EdchMacdPduSize6 EdchMacdPduSize7 EdchMacdPduSize8 EdchMacdPduSize9 EdchMacdPduSizeNum EdchPendingTime4A EdchPendingTime4B
End date SET TZ(Mandatory) RNC E-DCH MAC-D PDU size1 ADD TYPRABHSPA(Optional) RNC E-DCH MAC-D PDU size10ADD TYPRABHSPA(Optional) RNC E-DCH MAC-D PDU size11ADD TYPRABHSPA(Optional) RNC E-DCH MAC-D PDU size12ADD TYPRABHSPA(Optional) RNC E-DCH MAC-D PDU size2 ADD TYPRABHSPA(Optional) RNC E-DCH MAC-D PDU size3 ADD TYPRABHSPA(Optional) RNC E-DCH MAC-D PDU size4 ADD TYPRABHSPA(Optional) RNC E-DCH MAC-D PDU size5 ADD TYPRABHSPA(Optional) RNC E-DCH MAC-D PDU size6 ADD TYPRABHSPA(Optional) RNC E-DCH MAC-D PDU size7 ADD TYPRABHSPA(Optional) RNC E-DCH MAC-D PDU size8 ADD TYPRABHSPA(Optional) RNC E-DCH MAC-D PDU size9 ADD TYPRABHSPA(Optional) RNC The Number of E-DCH MAC-D PDU Size ADD TYPRABHSPA(Optional) RNC Period Amount after trigger 4A on EDCH ADD TYPRABDCCCMC(Optional) RNC Period Amount after trigger 4B on EDCH ADD TYPRABDCCCMC(Optional) RNC
EdchRateAdjustSet EdchSirMaxDownStep
HSUPA UpLink Rate AdjustSET EDCHRATEADJUSTSET(Optional) Set RNC Maximum E-DCH SIR decrease step ADD TYPRABOLPC(Mandatory) RNC
EdchTargetLargeRetransNum Edch Target Large Number of E-DCH PDU retransfer ADD TYPRABOLPC(Mandatory) RNC
EdchTargetLittleRetransNum Edch Little Target Number of E-DCH PDU retransfer ADD TYPRABOLPC(Mandatory) RNC EdchTimetoTrigger4A Period Amount to trigger 4A ADD TYPRABDCCCMC(Optional) on EDCH RNC EdchTimetoTrigger4B Period Amount to trigger 4B ADD TYPRABDCCCMC(Optional) on EDCH RNC EdchTtiType Edch TTI type SET DTXDRXPARA(Mandatory) RNC EFACHDL EFACH channel forward factor TRMFACTOR(Optional) ADD RNC EFACHDTCHGBP EFACH DTCH GBP ADD CELLEFACH(Optional) RNC EFachSupInd EFachSupInd ADD NRNCCELL(Mandatory) RNC EFachSwitch switch for RRC established on E_FACH SET RRCESTCAUSE(Optional) RNC EHSPACMPermissionInd CM permission ind on HSPA+ CMCF(Optional) SET RNC EM EndType SET TZ(Mandatory) RNC EmcPreeRefVulnSwitch Preemptvulnerability for Emergency call switch SET QUEUEPREEMPT(Optional) RNC EMERGENCY Emergency verification ADD MTP3LKS(Optional) RNC EmergLCSSwitch Emergency LCS Switch SET SMLC(Optional) RNC
EMONTH EMSIP EncryptionAlgo EndTime1 EndTime2 EndTime3 ENTITYT ERFAMEventPara ERFAMEventPrid ERFAMPRDEventPara ERFAMPRDEventPrid ERFAMSCDEventPara ERFAMSCDEventPrid
End month SET TZ(Mandatory) RNC EMS IP Address ADD EMSIP(Mandatory) RNC Encryption algorithm SET UEA(Optional) RNC First Cell Dynamic ShutDown Interval End Time ADD CELLDYNSHUTDOWN(Mandatory) RNC Second Cell Dynamic ShutDown Interval End Time ADD CELLDYNSHUTDOWN(Mandatory) RNC Third Cell Dynamic ShutDown Interval End Time ADD CELLDYNSHUTDOWN(Mandatory) RNC ADD M3DE(Mandatory) ADD M3LE(Mandatory) Destination entity type RNC Err Frmae Event Para ACT ETHOAMAH(Optional) RNC Err Frmae Event Prid ACT ETHOAMAH(Optional) RNC Err Frmae Cyc Event Para ACT ETHOAMAH(Optional) RNC Err Frmae Cyc Event Prid ACT ETHOAMAH(Optional) RNC Err Frmae Sec Event Para ACT ETHOAMAH(Optional) RNC Err Frmae Sec Event Prid ACT ETHOAMAH(Optional) RNC
Code Number for E-RGCH/E-HICH ADD CELLHSUPA(Optional) RNC Establishment indication timer AAL2TMR(Optional) RNC SET Establishment request timer SET AAL2TMR(Optional) RNC EndTime SET TZ(Mandatory) RNC Traffic Measurement Event 4A threshold ADD TYPRABDCCCMC(Optional) RNC Traffic Measurement Event 4B threshold ADD TYPRABDCCCMC(Mandatory) RNC Event A report delay ADD TYPRABRLC(Optional) RNC Event A threshold ADD TYPRABRLC(Optional) RNC
EventBThred EWEEK EWSEQ EX_ANO1_SIG_MAX EX_ANO1_SIG_MIN EX_ANO1_TYPE EX_ANO1_VAL_MAX EX_ANO1_VAL_MIN EX_ANO2_SIG_MAX EX_ANO2_SIG_MIN EX_ANO2_TYPE EX_ANO2_VAL_MAX EX_ANO2_VAL_MIN EX_ANO3_SIG_MAX EX_ANO3_SIG_MIN EX_ANO3_TYPE EX_ANO3_VAL_MAX EX_ANO3_VAL_MIN EX_ANO4_SIG_MAX EX_ANO4_SIG_MIN EX_ANO4_TYPE EX_ANO4_VAL_MAX EX_ANO4_VAL_MIN F2PTvmPTAT F2PTvmTimeToTrig FachId FachIdforMcch
Event B threshold ADD TYPRABRLC(Optional) RNC End week SET TZ(Mandatory) RNC End week sequence SET TZ(Mandatory) RNC Upper Limit of Signal OutputADD EMU(Optional) of External Analog 1 RNC Lower Limit of Signal Output of External Analog 1 ADD EMU(Optional) RNC Sensor Type of External Analog 1 EMU(Optional) ADD RNC Upper Limit of MeasurementADD EMU(Optional) Range of External Analog 1 RNC Lower Limit of MeasurementADD EMU(Optional) Range of External Analog 1 RNC Upper Limit of Signal OutputADD EMU(Optional) of External Analog 2 RNC Lower Limit of Signal Output of External Analog 2 ADD EMU(Optional) RNC Sensor Type of External Analog 2 EMU(Optional) ADD RNC Upper Limit of MeasurementADD EMU(Optional) Range of External Analog 2 RNC Lower Limit of MeasurementADD EMU(Optional) Range of External Analog 2 RNC Upper Limit of Signal OutputADD EMU(Optional) of External Analog 3 RNC Lower Limit of Signal Output of External Analog 3 ADD EMU(Optional) RNC Sensor Type of External Analog 3 EMU(Optional) ADD RNC Upper Limit of MeasurementADD EMU(Optional) Range of External Analog 3 RNC Lower Limit of MeasurementADD EMU(Optional) Range of External Analog 3 RNC Upper Limit of Signal OutputADD EMU(Optional) of External Analog 4 RNC Lower Limit of Signal Output of External Analog 4 ADD EMU(Optional) RNC Sensor Type of External Analog 4 EMU(Optional) ADD RNC Upper Limit of MeasurementADD EMU(Optional) Range of External Analog 4 RNC Lower Limit of MeasurementADD EMU(Optional) Range of External Analog 4 RNC BE F2P 4B Pending Time SET UESTATETRANS(Optional) RNC BE F2P 4B Time SET UESTATETRANS(Optional) RNC FACH ID ADD CTCH(Mandatory) RNC FACH ID for MCCH ADD CELLMCCH(Mandatory) RNC ADD CELLMBMSFACH(Option al) SET MBMSFACH(Optional) SET MSCHFACH(Optional) Fach Max Power RNC FACH Meas Indicator ADD CELLMEAS(Optional)RNC FACH power reduce value ADD CELLOLC(Optional) RNC SPI Factor SET SPIFACTOR(Mandatory) RNC Factor SET CTRLFACTOR(Mandatory) RNC DCCC Rate Up Fail Time Threshold SET DCCC(Optional) RNC Flow Control SET ETHPORT(Optional) RNC
ADD FRALNK(Optional) ADD IMAGRP(Optional) SET OPT(Mandatory) SET ETHPORT(Mandatory) ADD MPGRP(Optional) ADD PPPLNK(Optional) ADD UNILNK(Optional) ADD ATMLOGICPORT(Option al) ADD PORTFLOWCTRLPARA( Mandatory) ADD IPLOGICPORT(Optional)
FCINDEX
RNC
FCSTYPE FddTpcDlStepSize
CRC check mode RNC FDD DL power control step size FRC(Optional) SET RNC ADD CELLSETUP(Optional) ADD NRNCCELL(Optional) FdpchDivModforMIMO F-DPCH diversity mode for MIMO user RNC ADD CELLSETUP(Optional) ADD NRNCCELL(Optional) FdpchDivModforNonMIMO F-DPCH diversity mode for non MIMO user RNC FdpchMaxRefPwr FDPCH maximum reference SET FDPCHRLPWR(Optional) power RNC FdpchMinRefPwr FDPCH minimum reference power SET FDPCHRLPWR(Optional) RNC FdpchPO2 F-DPCH Power Offset SET FDPCHPARA(Optional) RNC FEDHCPSVRIP FE Dhcp Server IP ADD NODEBESN(Mandatory) RNC EXP CFGMML(Optional) BKP DB(Optional) FILENAME FILEPATH Export file name Export file path EXP CFGMML(Optional) RNC RNC
FilterCoef
2D2F filter coeff RNC Fixed MAC-hs window size ADD NODEBLMTPARA(Optional) RNC Flc Algo Switch ADD CELLMCCH(Optional) RNC
ADD FRALNK(Optional) SET OPT(Optional) ADD PPPLNK(Optional) ADD IMAGRP(Optional) ADD IPLOGICPORT(Optional) ADD MPGRP(Optional) ADD UNILNK(Optional) ADD ATMLOGICPORT(Option al) SET ETHPORT(Optional)
Flow control switch RNC Flow ID ADD FLOW(Mandatory) RNC File Name ACT LICENSE(Optional) RNC File Name EXP ELABEL(Optional) RNC ForcedSho Switch In CELLID+RTT Method SET SMLC(Optional) RNC FPMUX flag ADD IPPATH(Optional) RNC the maximal time for FP MUX ADD IPPATH(Optional) RNC MP flake size ADD MPGRP(Optional) RNC Fractional link No. ADD FRALNK(Mandatory) RNC
Fractional link type TX frame length Factor table index Factor table index Function Switch1 Function Switch2 Function Switch3 Function Switch4
ADD FRALNK(Mandatory) RNC ADD IMAGRP(Optional) RNC ADD ADJMAP(Mandatory) RNC ADD TRMFACTOR(Mandatory) RNC ACT LICENSE(Optional) RNC ACT LICENSE(Optional) RNC ACT LICENSE(Optional) RNC ACT LICENSE(Optional) RNC
ADD PPPLNK(Optional) ADD MPGRP(Optional) ADD FRALNK(Optional) ADD IMAGRP(Optional) ADD UNILNK(Optional) ADD IPLOGICPORT(Optional)
FWDCONGBW FWDCONGBW
FWDCONGBW
FWDCONGBW
RNC
FWDCONGBW
RNC
ADD PPPLNK(Optional) ADD MPGRP(Optional) ADD FRALNK(Optional) ADD IMAGRP(Optional) ADD UNILNK(Optional)
FWDCONGCLRBW
RNC
FWDCONGCLRBW FWDCONGCLRBW
Forward congestion clear threshold IPLOGICPORT(Optional) ADD RNC Forward congestion clear threshold ATMLOGICPORT(Optional) ADD RNC
FWDCONGCLRBW
FWDCONGCLRBW
RNC
FWDCONGCLRBW
RNC
ADD PPPLNK(Optional) ADD MPGRP(Optional) ADD FRALNK(Optional) ADD IMAGRP(Optional) ADD UNILNK(Optional) ADD IPLOGICPORT(Optional)
FWDHORSVBW
RNC
FWDHORSVBW
FWDHORSVBW
FWDHORSVBW
RNC
Forward handover reserved bandwidth ADD RSCGRP(Optional) RNC Gain Factor BetaC ADD PRACHTFC(Mandatory) RNC Gain Factor BetaD ADD PRACHTFC(Optional)RNC Check IP address STR IPCHK(Mandatory) RNC Geo-coordinate data format ADD SMLCCELL(Optional)RNC
GCDF ADD GPS(Optional) RNC General common channel service downlink factor ADD TRMFACTOR(Optional) RNC General common channel service uplink factor ADD TRMFACTOR(Optional) RNC
GoldMaxMode
RNC
GoldMaxMode Max Mode Of Narrowband AMRC For Golden Users RNC GoldUserLoadControlSwitchGold user load control switchADD CELLLDR(Optional) RNC GPSPERIOD GPS data report period ADD GPS(Optional) RNC GRPID Transport Resource Group No. ADD RSCGRP(Mandatory) RNC GRPT Transport Resource Group Type RSCGRP(Mandatory) RNC ADD ADD GSMCELL(Mandatory) HO CELL(Optional) ADD GSMNCELL(Mandatory) GSMCellIndex GSM cell index RNC GSMCellName GSM cell name ADD GSMCELL(Mandatory) RNC HangBlockNum5A Interval Block Number ADD TYPRABQUALITYMEAS(Mandatory) RNC HappyBR Happy bit rate SET USERHAPPYBR(Optional) RNC HarqPreaCap HARQ Preamble capability indication ADD NRNCCELL(Optional)RNC HBDelaycnd Happy bit delay time ADD TYPRABHSPA(Optional) RNC HBINTER Heartbeat interval ADD SCTPLNK(Optional) RNC
HCARRYT
HCodeAdjPunshTimerLength Punish Timer Length for Code Adjust for HSDPA ADD CELLHSDPA(Optional) RNC
HCSPrio HDBKGDL
HCS priority level RNC HSDPA background service downlink factor ADD TRMFACTOR(Optional) RNC
HDBKGPRIPATH HDBKGPRITH
HSDPA background primary ADD TRMMAP(Optional) RNC path HSDPA background pri path ADDthreshold load LOADEQ(Optional) RNC
HSDPA background secondary path ADD TRMMAP(Optional) RNC HSDPA background pri sec path load ratio threshold ADD LOADEQ(Optional) RNC HSDPA conversational service downlink factor ADD TRMFACTOR(Optional) RNC
HDCONVPRIPATH HDCONVPRITH
HSDPA conversational primary path ADD TRMMAP(Optional) RNC HSDPA conversational pri path load threshold ADD LOADEQ(Optional) RNC
HDCONVSECPATH HSDPA conversational secondary path ADD TRMMAP(Optional) RNC HDCONVSECWHT HSDPA conversational pri sec pathLOADEQ(Optional) RNC ADD load ratio threshold HDHIGHINTERACTPRITHHSDPA high interactive pri path load threshold ADD LOADEQ(Optional) RNC HDHIGHINTERACTSECWHT HSDPA high pri sec path load ratioLOADEQ(Optional) RNC ADD threshold HDINTERDL HSDPA interactive service downlink factor ADD TRMFACTOR(Optional) RNC
HDINTHGHPRIPATH
HDINTHGHSECPATH
HDINTLOWPRIPATH
HDINTLOWSECPATH
HDINTMIDPRIPATH
HDINTMIDSECPATH HSDPA middle PRI interactive secondary path ADD TRMMAP(Optional) RNC HDLOWINTERACTPRITH HSDPA low interactive pri path load threshold ADD LOADEQ(Optional) RNC HDLOWINTERACTSECWHT HSDPA low interactive pri sec path load ratio threshold RNC ADD LOADEQ(Optional) HDMIDINTERACTPRITH HSDPA mid interactive pri path load threshold ADD LOADEQ(Optional) RNC HDMIDINTERACTSECWHT HSDPA mid interactive pri sec path load ratio threshold RNC ADD LOADEQ(Optional) HDSIPDL HSDPA IMS signal downlink factor ADD TRMFACTOR(Optional) RNC
HDSIPPRIPATH HDSIPPRITH
HSDPA IMS Signal primary ADD TRMMAP(Optional) RNC path HSDPA IMS Signal pri path ADDthreshold load LOADEQ(Optional) RNC
HSDPA IMS Signal secondary path ADD TRMMAP(Optional) RNC HSDPA IMS Signal pri sec path load ratio threshold ADD LOADEQ(Optional) RNC HSDPA signal downlink factor ADD TRMFACTOR(Optional) RNC
HDSRBPRIPATH HDSRBPRITH
HSDPA Signal primary path ADD TRMMAP(Optional) RNC HSDPA Signal pri path load threshold ADD LOADEQ(Optional) RNC
HSDPA Signal secondary path ADD TRMMAP(Optional) RNC HSDPA Signal pri sec path load ratio threshold ADD LOADEQ(Optional) RNC HSDPA streaming service downlink factor ADD TRMFACTOR(Optional) RNC
HDSTRMPRIPATH HDSTRMPRITH
HSDPA streaming primary path TRMMAP(Optional) RNC ADD HSDPA streaming pri path load threshold ADD LOADEQ(Optional) RNC
HSDPA streaming secondaryADD TRMMAP(Optional) RNC path HSDPA streaming pri sec path loadLOADEQ(Optional) RNC ADD ratio threshold HSDPA voice service downlink factor ADD TRMFACTOR(Optional) RNC
HDVOICEPRIPATH
HDVOICESECPATH HFRAATMLNKN
HSDPA Voice secondary path ADD TRMMAP(Optional) RNC High FRAATM link No. ADD VPCLCX(Optional) RNC
Relocation with HHO process switch ADD NRNC(Optional) RNC HHO cross IUR trigger ADD NRNC(Mandatory) RNC High IMA group No. ADD VPCLCX(Optional) RNC HO active set update response timer SET STATETIMER(Optional) RNC HO cell update response timer SET STATETIMER(Optional) RNC
The priority of coverage based inter-frequency handover RNC ADD INTERFREQNCELL(Optional) HO paging response timer SET STATETIMER(Optional) RNC HO PhyCh reconfiguration timer STATETIMER(Optional) SET RNC HO relocation request timer SET STATETIMER(Optional) RNC
HostType
ADD NODEB(Optional)
RNC
HoSwitch
HandOver switch
HOThdEcN0
Inter-freq measure target frequencyCELLMBDRINTERFREQ(Optional) ADD trigger RSCP THD RNC HO wait timer for TrCH or RB reconfiguration response RNC SET STATETIMER(Optional) High NCOPT port No. ADD VPCLCX(Optional) RNC AF of hsdpa background service ADMCTRL(Optional) RNC SET HSDPA best effort PBR threshold CELLCAC(Optional) RNC ADD
CM permission ind on HSDPA CMCF(Optional) SET RNC AF of hsdpa conv service SET ADMCTRL(Optional) RNC AF of hsdpa interactive service ADMCTRL(Optional) RNC SET SET LDM(Optional) HsdpaNeedPwrFilterLen HSDPA need power filter lenSET SATLDM(Optional) RNC SET LDM(Optional) SET SATLDM(Optional) RNC HsdpaPrvidBitRateFilterLen HSDPA bit rate filter len HsdpaRabEstAttMinNum The minimum of HSDPA Rab attempt setup Per Spu SET KPIALMTHD(Optional) RNC HsdpaRabEstSuccRatioThd HSDPA Rab successful setup ratio Per Spu SET KPIALMTHD(Optional) RNC HsdpaStreamAF AF of hsdpa streaming service SET ADMCTRL(Optional) RNC HsdpaStrmPBRThd HSDPA streaming PBR threshold CELLCAC(Optional) RNC ADD HSDPAthroughput Max throughput of HSDPA ACT LICENSE(Optional) RNC HsdpaUserNumThd Cell Dynamic ShutDown Hsdpa User number Threshold RNC ADD CELLDYNSHUTDOWN(Optional) HsdschMacdPduSize1 HS-DSCH MAC-D PDU size1 ADD TYPRABHSPA(Optional) RNC HsdschMacdPduSize2 HS-DSCH MAC-D PDU size2 ADD TYPRABHSPA(Optional) RNC HsdschMacdPduSize3 HS-DSCH MAC-D PDU size3 ADD TYPRABHSPA(Optional) RNC HsdschMacdPduSize4 HS-DSCH MAC-D PDU size4 ADD TYPRABHSPA(Optional) RNC HsdschMacdPduSize5 HS-DSCH MAC-D PDU size5 ADD TYPRABHSPA(Optional) RNC HsdschMacdPduSize6 HS-DSCH MAC-D PDU size6 ADD TYPRABHSPA(Optional) RNC HsdschMacdPduSize7 HS-DSCH MAC-D PDU size7 ADD TYPRABHSPA(Optional) RNC HsdschMacdPduSize8 HS-DSCH MAC-D PDU size8 ADD TYPRABHSPA(Optional) RNC HsdschMacdPduSizeNum The Number of HS-DSCH MAC-DTYPRABHSPA(Optional) ADD PDU Size RNC HSN High slot No. ADD VPCLCX(Mandatory) RNC
HspaEnhSwitch HSPAPlusSelection HspaPlusSwitch HspaPower HspaTimerLen HspdcchSecondCodeSupp1 HspdcchSecondCodeSupp2 HspdcchSecondCodeSupp3 HspdcchSecondCodeSupp4 HsPdschCodeNum
Cell Hspa Enhanced functionADD CELLALGOSWITCH(Optional) switch RNC prefered HSPA PLUS character FRC(Optional) SET RNC Cell Hspa Plus function switch ADD CELLALGOSWITCH(Optional) RNC The Offset of HSPA Total Power CELLHSDPA(Optional) ADD RNC HSPA hysteresis timer lengthSET HOCOMM(Optional) RNC Support second code Flag forSET HSSCCHLESSOPPARA(Optional) Tb1 RNC Support second code Flag forSET HSSCCHLESSOPPARA(Optional) Tb2 RNC Support second code Flag forSET HSSCCHLESSOPPARA(Optional) Tb3 RNC Support second code Flag forSET HSSCCHLESSOPPARA(Optional) Tb4 RNC Code Number for HS-PDSCH ADD CELLHSDPA(Optional) RNC
HsPdschMaxCodeNum
HsPdschMinCodeNum HsPdschMPOConstEnum
Code Min Number for HS-PDSCH CELLHSDPA(Optional) ADD RNC HS-PDSCH MPO Constant ADD CELLHSDPA(Optional) RNC
ADD CELLSETUP(Optional) ADD NRNCCELL(Optional) HspdschPrioTxDiversityMode Hspdsch priority Tx diversity mode RNC HSRN High subrack No. ADD VPCLCX(Mandatory) RNC HsScchCodeNum Code Number for HS-SCCH ADD CELLHSDPA(Optional) RNC Hsupa10msSchPrdForGrant HSUPA TTI 10ms schedule period with grant SET FRC(Optional) RNC
Hsupa10msSchPrdForNonGrant HSUPA TTI 10ms schedule period without grant SET FRC(Optional) RNC Hsupa2msSchPrdForGrant HSUPA TTI 2ms schedule period FRC(Optional) SET with grant RNC Hsupa2msSchPrdForNonGrant HSUPA TTI 2ms schedule period FRC(Optional) SET without grant RNC HsupaBackGroundAF AF of hsupa background service ADMCTRL(Optional) RNC SET HsupaBeShoRateThd HSUPA BE SHO THD RATE DCCC(Optional) SET RNC HsupaCeConsumeSelection HSUPA Credit Consume Type ADD NODEBALGOPARA(Optional) RNC
HsupaCMPermissionInd CM permission ind on HSUPA CMCF(Optional) SET RNC HsupaConvAF AF of hsupa conv service SET ADMCTRL(Optional) RNC HsupaDcccStg HSUPA DCCC Strategy SET DCCC(Optional) RNC HsupaEqualPriorityUserPBRThd priority HSUPA user PBR threshold Equal ADD CELLCAC(Optional) RNC HsupaHighPriorityUserPBRThd priority HSUPA user PBR threshold High ADD CELLCAC(Optional) RNC HsupaInitialRate Initial rate of HSUPA BE traffic FRC(Optional) SET RNC HsupaInteractAF AF of hsupa interactive service ADMCTRL(Optional) RNC SET HsupaLowPriorityUserPBRThd priority HSUPA user PBR threshold Low ADD CELLCAC(Optional) RNC HsupaPrvidBitRateFilterLen HSUPA bit rate filter len SET LDM(Optional) RNC HsupaRabEstAttMinNum The minimum of HSUPA Rab attempt setup Per Spu SET KPIALMTHD(Optional) RNC HsupaRabEstSuccRatioThd HSUPA Rab successful setup ratio Per Spu SET KPIALMTHD(Optional) RNC HsupaStreamAF AF of hsupa streaming service SET ADMCTRL(Optional) RNC HSUPAthroughput Max throughput of HSUPA ACT LICENSE(Optional) RNC
HsupAuRetrnsLdRelThd
HsupAuRetrnsLdTrigThd HsupaUserNumThd
HSUPA auto retransmit load ADD CELLLDM(Optional) RNC trigger threshold Cell Dynamic ShutDown Hsupa User number Threshold RNC ADD CELLDYNSHUTDOWN(Optional)
HUBKGPRIPATH HUBKGPRITH
HSUPA background primary ADD TRMMAP(Optional) RNC path HSUPA background pri path ADDthreshold load LOADEQ(Optional) RNC
HSUPA background secondary path ADD TRMMAP(Optional) RNC HSUPA background pri sec path load ratio threshold ADD LOADEQ(Optional) RNC HSUPA background service uplinkTRMFACTOR(Optional) ADD factor RNC
HUCONVPRIPATH HUCONVPRITH
HSUPA conversational primary path ADD TRMMAP(Optional) RNC HSUPA conversational pri path load threshold ADD LOADEQ(Optional) RNC
HUCONVSECPATH HSUPA conversational secondary path ADD TRMMAP(Optional) RNC HUCONVSECWHT HSUPA conversational pri sec pathLOADEQ(Optional) RNC ADD load ratio threshold HUCONVUL HSUPA conversational service uplink factor ADD TRMFACTOR(Optional) RNC HUHIGHINTERACTPRITHHSUPA high interactive pri path load threshold ADD LOADEQ(Optional) RNC HUHIGHINTERACTSECWHT HSUPA high interactive pri sec path load ratio threshold RNC ADD LOADEQ(Optional) HUINTERUL HSUPA interactive service uplink factor ADD TRMFACTOR(Optional) RNC
HUINTHGHPRIPATH
HUINTHGHSECPATH
HUINTLOWPRIPATH
HUINTLOWSECPATH
HUINTMIDPRIPATH
HUINTMIDSECPATH HSUPA middle PRI interactive secondary path ADD TRMMAP(Optional) HULOWINTERACTPRITH HSUPA low interactive pri path load threshold ADD LOADEQ(Optional) HULOWINTERACTSECWHT HSUPA low interactive pri sec path load ratio threshold ADD LOADEQ(Optional) HUM_MASK Enable Humidity Alarm Reporting EMU(Optional) ADD HUM_THD_HIGH Upper Limit of Humidity Alarm EMU(Optional) ADD HUM_THD_LOW Lower Limit of Humidity Alarm EMU(Optional) ADD HUMIDINTERACTPRITH HSUPA mid interactive pri path load threshold ADD LOADEQ(Optional) HUMIDINTERACTSECWHT HSUPA mid interactive pri sec path load ratio threshold ADD LOADEQ(Optional) HUNILNKN High UNI link No. ADD VPCLCX(Optional)
HUSIPPRIPATH HUSIPPRITH
HSUPA IMS Signal primary ADD TRMMAP(Optional) RNC path HSUPA IMS Signal pri path ADDthreshold load LOADEQ(Optional) RNC
HSUPA IMS Signal secondary path ADD TRMMAP(Optional) RNC HSUPA IMS Signal pri sec path load ratio threshold ADD LOADEQ(Optional) RNC HSUPA IMS signal uplink factor TRMFACTOR(Optional) ADD RNC
HUSRBPRIPATH HUSRBPRITH
HSUPA Signal primary path ADD TRMMAP(Optional) RNC HSUPA Signal pri path load threshold ADD LOADEQ(Optional) RNC
HSUPA Signal secondary path ADD TRMMAP(Optional) RNC HSUPA Signal pri sec path load ratio threshold ADD LOADEQ(Optional) RNC HSUPA signal uplink factor ADD TRMFACTOR(Optional) RNC
HUSTRMPRIPATH HUSTRMPRITH
HSUPA streaming primary path TRMMAP(Optional) RNC ADD HSUPA streaming pri path load threshold ADD LOADEQ(Optional) RNC
HSUPA streaming secondaryADD TRMMAP(Optional) RNC path HSUPA streaming pri sec path loadLOADEQ(Optional) RNC ADD ratio threshold HSUPA streaming service uplink factor ADD TRMFACTOR(Optional) RNC
HUVOICEPRIPATH
HSUPA Voice secondary path ADD TRMMAP(Optional) RNC HSUPA voice service uplink ADD TRMFACTOR(Optional) factor RNC High VCI ADD VPCLCX(Optional) RNC High VPI ADD VPCLCX(Mandatory) RNC
HystFor1A
1A hysteresis
RNC
HystFor1B
1B hysteresis
RNC
HystFor1C
1C hysteresis
RNC
HystFor1D
1D hysteresis
RNC
HystFor1F
1F hysteresis
RNC
HystFor1J
1J hysteresis
RNC
HystFor2B
2B hysteresis
RNC
Hystfor2C
2C hysteresis
RNC
ADD CELLINTERFREQHOCO V(Optional) SET INTERFREQHOCOV(Opti onal) ADD CELLINTERRATHOCOV (Optional) SET INTERRATHOCOV(Optio nal)
HystFor2D
2D hysteresis
RNC
ADD CELLINTERFREQHOCO V(Optional) SET INTERFREQHOCOV(Opti onal) ADD CELLINTERRATHOCOV (Optional) SET INTERRATHOCOV(Optio nal)
HystFor2F
2F hysteresis
RNC
Hystfor3A
3A hysteresis
RNC
Hystfor3C
3C hysteresis
RNC
HystforInterRAT
Inter-RAT hysteresis
RNC
RNC SET SCCPTMR(Optional) RNC SET SCCPTMR(Optional) RNC ADD IPPATH(Optional) RNC
ID IdleCellBarred IdleIntraFreqReselection
Task ID STR SCHTSK(Optional) RNC Cell barred indicator for SIB3 ADD CELLACCESSSTRICT(Mandatory) RNC Intra-freq cell reselection ind ADD CELLACCESSSTRICT(Optional) for SIB3 RNC
IdleQhyst1s
IdleQhyst2s
IdleQoffset1sn
IdleQoffset1sn
RNC
IdleQoffset2sn RNC Inter-freq cell reselection threshold CELLSELRESEL(Optional) ADD for idle mode RNC Intra-freq cell reselection threshold CELLSELRESEL(Optional) ADD for idle mode RNC Time barred for SIB3 ADD CELLACCESSSTRICT(Optional) RNC
IDLETMR Timer_Idle ADD SAALLNK(Optional) RNC IFAntiPingpangTimerLengthThe timer length of anti pingpong HOCOMM(Optional) RNC SET NCOV interfreq handover IgorTmr TigOR SET IUTIMERANDNUM(Optional) RNC ADD IMAGRP(Mandatory) ADD FRALNK(Mandatory) ADD IMALNK(Mandatory) IMAGRPN IMA group No. RNC IMAID IMA ID ADD IMAGRP(Optional) RNC
IMALNKN IMAVER
ADD IMAGRP(Optional)
RNC RNC
ImsBearEnhancedSwitch
RNC
IMS channel type IMS MAC-c flow GBR IMSI ID The end of IMSI The start of IMSI
SET FRCCHLTYPEPARA(Optional) RNC ADD CELLEFACH(Optional) RNC RST IUR(Mandatory) RNC ADD IMSISNAMAP(Mandatory) RNC ADD IMSISNAMAP(Mandatory) RNC
ImsInitialAccessRate IMS initial rate SET FRC(Mandatory) RNC ImsiRtMax Maximum of IMSI route parameterIMSIIDNNSCNIDMAP(Mandatory) ADD in IDNNS RNC ImsiRtMin Minimum of IMSI route parameter IMSIIDNNSCNIDMAP(Mandatory) ADD in IDNNS RNC IMSMBR IMS MAC-c flow MBR ADD CELLEFACH(Optional) RNC InactThsForCycle2 Threshold For DPCCH Transmission Cycle 2 SET DTXDRXPARA(Optional) RNC InactThsForDrxCycle DRX Inactivity Threshold SET DTXDRXPARA(Optional) RNC InactThsForGrantMonitoringInactivity Threshold for UE Grant DTXDRXPARA(Optional) SET Monitoring RNC INFRA_RED_MASK Enable Infrared Sensor Alarm Reporting ADD EMU(Optional) RNC INHT Inhibit Type INH BRD(Mandatory) RNC INHTMR Timer_NO-CREDIT ADD SAALLNK(Optional) RNC IntegrityProtectAlgo Integrity protection algorithmSET UIA(Optional) RNC INTERACTGBR Interactive MAC-c flow GBR ADD CELLEFACH(Optional) RNC INTERACTMBR Interactive MAC-c flow MBR ADD CELLEFACH(Optional) RNC InterFreqActiveType MBDR switch ADD CELLMBDRINTERFREQ(Optional) RNC
InterFreqCovHOThdEcN0 Inter-freq measure target frequencyCELLINTERFREQHONCOV(Optional) ADD trigger Ec/No THD RNC
InterFreqCSThd2DEcN0
RNC
InterFreqCSThd2DRSCP
RNC
InterFreqCSThd2FEcN0
RNC
InterFreqCSThd2FRSCP Inter-freq CS measure stop RSCP THD RNC InterFreqDlMbdrTrigThreshold theshold DL ADD CELLMBDRINTERFREQ(Optional) RNC
ADD CELLINTERFREQHOCO V(Optional) SET INTERFREQHOCOV(Opti onal) ADD CELLINTERFREQHONC OV(Optional) SET INTERFREQHONCOV(O ptional) ADD CELLMBDRINTERFREQ( Optional)
InterFreqFilterCoef
RNC
InterFreqHOSwitch
InterFreqHThd2DEcN0
RNC
InterFreqHThd2DRSCP
RNC
InterFreqHThd2FEcN0
RNC
InterFreqHThd2FRSCP InterFreqInterRatMeasInd
Inter-freq H measure stop RSCP THD RNC Inter-freq/Inter-RAT Meas Ctrl Info Ind ADD CELLMEAS(Optional)RNC
InterFreqMeasQuantity
ADD CELLINTERFREQHOCO V(Optional) SET INTERFREQHOCOV(Opti onal) ADD CELLINTERFREQHONC OV(Optional) SET INTERFREQHONCOV(O ptional) ADD CELLMBDRINTERFREQ( Optional)
InterFreqMeasTime Inter-freq measure timer length RNC InterFreqNCellDetectSwitch Inter-Frequency NeighboringSET NCELLDETECTSWITCH(Optional) Cell Detect Switch RNC
InterFreqNCovHOThdEcN0 Inter-freq measure target frequency trigger Ec/No THD RNC SET INTERFREQHONCOV(Optional)
RNC
RNC
RNC
RNC
InterFreqRATSwitch
InterFreqReportMode Inter-frequency measure report mode RNC InterFreqTreselScalingFactorInter-freqency scaling factor for reselection delay ADD CELLSELRESEL(Optional) RNC InterFreqUlMbdrTrigThreshold theshold UL ADD CELLMBDRINTERFREQ(Optional) RNC InterPlmnHoAllowedInterRat Inter RAT Inter Plmn Ho AllowedOPERATORSHARINGMODE(Optional) SET RNC InterPlmnHoAllowedIntraRat Intra RAT Inter Plmn Ho AllowedOPERATORSHARINGMODE(Optional) SET RNC InterRatActiveType MBDR switch ADD CELLMBDRINTERRAT(Optional) RNC
InterRATCSThd2DEcN0
RNC
InterRATCSThd2DRSCP
RNC
InterRATCSThd2FEcN0
RNC
InterRATCSThd2FRSCP Inter-RAT CS measure stop RSCP THD RNC InterRatDlMbdrTrigThreshold theshold DL ADD CELLMBDRINTERRAT(Optional) RNC
ADD CELLINTERRATHOCOV (Optional) SET INTERRATHOCOV(Optio nal) ADD CELLINTERRATHONCO V(Optional) SET INTERRATHONCOV(Opt ional) ADD CELLMBDRINTERRAT( Optional)
InterRATFilterCoef
RNC
InterRATHOAttempts InterRatHOPermit
Inter-RAT handover max attempt times Emergency LCS Inter-Rat Handover Permit SET SMLC(Optional)
RNC RNC
InterRATHOThd InterRatHOType
Inter-RAT CS handover decision THD ADD CELLMBDRINTERRAT(Optional) RNC Inter-Rat Handover Type SET SMLC(Optional) RNC
InterRATHThd2DEcN0
RNC
InterRATHThd2DRSCP
RNC
InterRATHThd2FEcN0
RNC
InterRATHThd2FRSCP
RNC
ADD CELLINTERRATHOCOV (Optional) SET INTERRATHOCOV(Optio nal) ADD CELLINTERRATHONCO V(Optional) SET INTERRATHONCOV(Opt ional) ADD CELLMBDRINTERRAT( Optional)
InterRATMeasTime Inter-RAT measure timer length RNC InterRatNCellDetectSwitch Inter-Rat Neighboring Cell DetectNCELLDETECTSWITCH(Optional) SET Switch RNC
InterRATNCovHOCSThd
RNC
InterRATNCovHOPSThd
RNC
InterRATPeriodReportInterval Inter-RAT period report interval ADD CELLINTERRATHOCOV (Optional) ADD CELLINTERRATHONCO V(Optional) SET INTERRATHOCOV(Optio nal) SET INTERRATHONCOV(Opt ional) InterRatPhyChFailNum Inter-RAT HO physical channel failure THD
RNC
RNC
InterRATPingPongHyst
RNC
InterRATPingPongTimer
RNC
RNC
RNC
RNC
RNC
InterRatReportMode Inter-RAT report mode RNC InterRatTreselScalingFactor Inter-RAT scaling factor for reselection delay ADD CELLSELRESEL(Optional) RNC InterRatUlMbdrTrigThreshold theshold UL ADD CELLMBDRINTERRAT(Optional) RNC INTERVAL Send PKT Interval STR ETHOAMLOOPTST(Optional) RNC
IntraAblThdFor1FEcNo
RNC
IntraAblThdFor1FRSCP
RNC
IntraFreqFilterCoef
IntraFreqLdbPeriodTimerLen Intra-frequency LDB period timer length RNC IntraFreqMeasInd Intra-freq Meas Ctrl Info Ind ADD CELLMEAS(Optional)RNC
ADD CELLINTRAFREQHO(Op tional) SET INTRAFREQHO(Optional) IntraFreqMeasQuantity Intra-freq Measure Quantity RNC IntraFreqNCellDetectSwitch Intra-Frequency NeighboringSET NCELLDETECTSWITCH(Optional) Cell Detect Switch RNC IntraRelThdFor1A 1A Event Relative ThresholdSET SMLC(Mandatory) RNC
RNC
IntraRelThdFor1ACSVP
RNC
IntraRelThdFor1APS IntraRelThdFor1B
RNC RNC
IntraRelThdFor1BCSNVP
RNC
IntraRelThdFor1BCSVP
RNC
PS service 1B event relative threshold RNC TinTR SET IUTIMERANDNUM(Optional) RNC IP address LOP VCL(Mandatory) RNC ADD ETHIP(Mandatory) ADD DEVIP(Mandatory) ADD IPOAPVC(Mandatory) ACT VCLCC(Mandatory) ADD ETHTRKIP(Mandatory)
Local IP address Next Hop IP Address Local IP address Head compress Head compress
RNC ADD VLANID(Mandatory) RNC ADD IPPATH(Mandatory) RNC ADD PPPLNK(Optional) RNC ADD MPGRP(Optional) RNC ADD ETHIP(Mandatory) ADD ETHTRKIP(Mandatory) IP address index RNC Whether Binding logical portADD NODEBIP(Mandatory)RNC or not Logic port No. ADD NODEBIP(Mandatory)RNC
NodeB IP_TRANS Slot No. ADD NODEBIP(Mandatory)RNC NodeB IP_TRANS Subrack No. NODEBIP(Mandatory)RNC ADD IP Trans Apart Ind ADD NODEB(Mandatory) RNC
IPTYPE IsAccessClass0Barred IsAccessClass10Barred IsAccessClass11Barred IsAccessClass12Barred IsAccessClass13Barred IsAccessClass14Barred IsAccessClass15Barred IsAccessClass1Barred IsAccessClass2Barred IsAccessClass3Barred IsAccessClass4Barred IsAccessClass5Barred IsAccessClass6Barred IsAccessClass7Barred IsAccessClass8Barred IsAccessClass9Barred ISCARRYMASTERFLG ISFIRSTCLASS
IP address type RNC Access class 0 barred indicator ADD CELLACCESSSTRICT(Optional) RNC Access class 10 barred indicator CELLACCESSSTRICT(Optional) ADD RNC Access class 11 barred indicator CELLACCESSSTRICT(Optional) ADD RNC Access class 12 barred indicator CELLACCESSSTRICT(Optional) ADD RNC Access class 13 barred indicator CELLACCESSSTRICT(Optional) ADD RNC Access class 14 barred indicator CELLACCESSSTRICT(Optional) ADD RNC Access class 15 barred indicator CELLACCESSSTRICT(Optional) ADD RNC Access class 1 barred indicator ADD CELLACCESSSTRICT(Optional) RNC Access class 2 barred indicator ADD CELLACCESSSTRICT(Optional) RNC Access class 3 barred indicator ADD CELLACCESSSTRICT(Optional) RNC Access class 4 barred indicator ADD CELLACCESSSTRICT(Optional) RNC Access class 5 barred indicator ADD CELLACCESSSTRICT(Optional) RNC Access class 6 barred indicator ADD CELLACCESSSTRICT(Optional) RNC Access class 7 barred indicator ADD CELLACCESSSTRICT(Optional) RNC Access class 8 barred indicator ADD CELLACCESSSTRICT(Optional) RNC Access class 9 barred indicator ADD CELLACCESSSTRICT(Optional) RNC Carry port master flag or not ACT ETHOAMAH(Optional) RNC Is First Class Transport Resource Group ADD RSCGRP(Mandatory) RNC
Is MAC-hs window size fixed or not ADD NODEBLMTPARA(Optional) RNC Primary Operator Flag ACT LICENSE(Optional) RNC IS QOSPATH ACT IPPM(Mandatory) RNC Is Root Node ADD ADJNODE(Mandatory) RNC ADD TRMMAP(Mandatory) ADD ADJMAP(Mandatory) ADD IPPATH(Mandatory) RNC Interface Type AC Restriction Interval of Cell ByACALGO(Optional) RNC SET IU DL OLC released RAB number NODEBOLC(Optional) ADD RNC UL OLC released RAB number NODEBOLC(Optional) ADD RNC Iu CS Release protection timer STATETIMER(Optional) SET RNC Iu PS Release protection timer SET STATETIMER(Optional) RNC
IurCongCtrlSuppInd IurExistInd IurHsdpaSuppInd IurHsupaSuppInd IUSIGCONNID IuStatePolicyForPool J0RXT J0RXVALUE J0TXT J0TXVALUE J1RXT J1RXVALUE J1TXT J1TXVALUE
Congestion Control IndicatorADD IUR for NRNC over NRNC(Optional) RNC IUR Interface Existing Indication NRNC(Mandatory) RNC ADD Hsdpa cap ind over IUR for NRNCNRNC(Optional) ADD RNC Hsupa cap ind over IUR for NRNCNRNC(Optional) ADD RNC IU signalling Id RST IURESOURCE(Mandatory) RNC Iu State Policy For RncPool ADD RNCPOOL(Optional) RNC J0 expected incept type SET OPT(Optional) RNC J0 expected incept value SET OPT(Optional) RNC J0 transmit type SET OPT(Optional) RNC J0 transmit value SET OPT(Optional) RNC J1 expected incept type SET OPT(Optional) RNC J1 expected incept value SET OPT(Optional) RNC J1 transmit type SET OPT(Optional) RNC J1 transmit value SET OPT(Optional) RNC
J2RXT
J2RXVALUE
J2TXT
J2 transmit type
Key detect or not STR IPCHK(Mandatory) RNC The Period of KPI Alarm Check KPIALMTHD(Optional) SET RNC RNC Report KPI Alarm Switch KPIALMTHD(Optional) SET RNC ADD LAC(Mandatory) ADD RAC(Mandatory) ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Man datory) ADD SAC(Mandatory) ADD NRNCCELL(Mandatory) ADD GSMCELL(Mandatory) ADD CZ(Mandatory) ADD LASNAMAP(Mandatory)
LAC LATITUDE LATITUDESEC LATPRD LATSUSTM LATTH LATUDK LATUPK LCARRYT LdbAvgFilterLen
Location area code RNC GPS antenna latitude ADD GPS(Mandatory) RNC GPS antenna latitude ADD GPS(Mandatory) RNC Delay measure period ADD IPLOGICPORT(Optional) RNC Delay adjust suspend period ADD IPLOGICPORT(Optional) RNC Rate down threshold for delay ADD IPLOGICPORT(Optional) RNC average delay down filter mantissa IPLOGICPORT(Optional) ADD RNC average delay up filter mantissa IPLOGICPORT(Optional) ADD RNC Low bearing type ADD VPCLCX(Mandatory) RNC SET LDM(Optional) LDB smoothing filter length SET SATLDM(Optional) RNC
LdbDRDchoice
RNC
RNC
LdbDRDLoadRemainThdHSDPA balance DRD power remain threshold for HSDPA RNC Dl load LdbDRDOffsetDCH Load balance DRD offset forSET DRD(Optional) DCH RNC LdbDRDOffsetHSDPA Load balance DRD offset forSET DRD(Optional) HSDPA RNC
LdbDRDSwitchDCH
RNC
LdbDRDSwitchHSDPA LdbDRDTotalPwrProThd
Load balance DRD switch for HSDPA Load balance DRD total power protect threshold SET DRD(Optional)
RNC RNC
load control algorithm switchSET LDCALGOPARA(Optional) RNC LDR code priority indicator ADD CELLLDR(Optional) RNC InterFreq HO code used ratioADD CELLLDR(Optional) RNC space threshold
LdrFirstPri
LdrFourthPri
LdrPeriodTimerLen
RNC
LdrSecondPri
LdrThirdPri
Path Load EQ Threshold Table Index ADD LOADEQ(Mandatory) RNC Bronze user Load EQ index ADD ADJMAP(Mandatory) RNC Gold user Load EQ index ADD ADJMAP(Mandatory) RNC Silver user Load EQ index ADD ADJMAP(Mandatory) RNC ADD M3LE(Mandatory) ADD M3DE(Mandatory)
Local entity No. Alarm mask switch MD Level Low FRAATM link No. Logic function type
Logic function type ADD BRD(Optional) Logic function type SET OPT(Mandatory) Low IMA group No. ADD VPCLCX(Optional) Dl SF threshold to limit CM SET CMCF(Mandatory) Low Activity Bit Rate Threshold DCCC(Optional) SET Lower Limit SET ALMPORT(Optional)
LNKCODE
Line code
SET E1T1(Optional)
RNC
SET E1T1LOP(Optional) LOP E1T1(Optional) STR E1T1TST(Optional) SET E1T1(Optional) SET COPTLNK(Mandatory)
LNKN
Link No.
RNC
Initial bearing traffic active tag ADD M3LNK(Optional) RNC ADD MTP3LKS(Optional) ADD M3LKS(Optional) Signalling link mask RNC Frame Structure SET E1T1(Optional) RNC
ACT VCLCC(Mandatory) LOP VCL(Mandatory) LNKT LOCALIP LOCALIP LOCALIP Link type Local IP address Local IP address Local IP RNC ADD PPPLNK(Mandatory) RNC ADD MPGRP(Mandatory) RNC STR IPLOPTST(Mandatory)RNC ADD LOCELL(Mandatory) ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Man RNC datory) ADD SCTPLNK(Mandatory) RNC ADD SCTPLNK(Optional) RNC ADD SCTPLNK(Mandatory) RNC SET LODCTRL(Mandatory)RNC ADD SCTPLNK(Mandatory) RNC ADD SCTPLNK(Mandatory) RNC ADD SCTPLNK(Mandatory) RNC ADD GPS(Mandatory) RNC ADD GPS(Mandatory) RNC
LoCell LOCIP1 LOCIP2 LOCPN LODCTRL LOGPORTFLAG LOGPORTNO LOGPORTSN LONGITUDE LONGITUDESEC
Local cell ID First local IP address Second local IP address Local SCTP port No. Board start load control. Logic Port Flag Logic Port No. Logic Port Slot No. GPS antenna longitude GPS antenna longitude
LPN
Loop type RNC Lost adjust suspend period ADD IPLOGICPORT(Optional) RNC Low NCOPT port No. ADD VPCLCX(Optional) RNC ADD IPLOGICPORT(Mandatory ) ADD IPPATH(Mandatory) RNC Logic port No.
The Logical Port Number IP Logic Port Slot No. Type of the logical port Link select
ADD ATMLOGICPORT(Optional) RNC ADD IPPATH(Mandatory) RNC ADD ATMLOGICPORT(Mandatory) RNC SET E1T1(Optional) RNC
LS Link select SET COPTLNK(Mandatory)RNC LSN Low slot No. ADD VPCLCX(Mandatory) RNC LSRN Low bearing subrack No. ADD VPCLCX(Mandatory) RNC LUNILNKN Low UNI link No. ADD VPCLCX(Optional) RNC LVCI Low VCI ADD VPCLCX(Optional) RNC LVPI Low VPI ADD VPCLCX(Mandatory) RNC M3UASRVPN M3UA service listening port SET SCTPSRVPORT(Optional) No. RNC MaccPageRepeatTimes Number of page re-TX SET DPUCFGDATA(Optional) RNC MacDtxCycle MAC Transmission Cycle SET DTXDRXPARA(Optional) RNC MacInactiveThreshold MAC Inactivity Threshold SET DTXDRXPARA(Optional) RNC MacPduMaxSizeForEFach Cell_FACH L2 enhance maxSET FRC(Optional) PDU size RNC MacPduMaxSizeForL2Enhance Cell_DCH L2 enhance max PDU size SET FRC(Optional) RNC ADD ETHMA(Mandatory) ADD ETHMEP(Mandatory) ACT ETHCC(Mandatory) PING MAC(Mandatory) TRC MAC(Mandatory)
Service mapping strategy switch CORRMALGOSWITCH(Optional) SET RNC SRNTI Mask RST IUR(Mandatory) RNC Subnet mask ADD DEVIP(Mandatory) RNC Subnet mask ADD PPPLNK(Mandatory) RNC Subnet mask ADD MPGRP(Mandatory) RNC Subnet mask ADD ETHIP(Mandatory) RNC Subnet mask ADD EMSIP(Mandatory) RNC Subnet mask ADD ETHTRKIP(Mandatory) RNC ADD CELLSELRESEL(Optional ) ADD MaxAllowedUlTxPower Max allowed UE UL TX power RNC NRNCCELL(Mandatory) MaxAllowedUlTxPowerInd Max allowed UE UL TX power indNRNCCELL(Optional)RNC ADD
MaxAntennaRange
MaxAntennaRangeImp MAXASSOCRETR
Cell Antenna Max Coverage ADD SMLCCELL(Optional)RNC Association max retransfer ADD SCTPLNK(Optional) RNC
MaxAttNum MaxAttNum
MaxBitRate
Inter-Freq DRD max attempt ADD CELLMBDRINTERFREQ(Optional) times RNC Inter-RAT DRD max attemptADD CELLMBDRINTERRAT(Optional) times RNC ADD TYPRABBASIC(Mandator y) ADD CELLRLPWR(Mandatory) RNC Max rate
MAXBW
Max bandwidth
MaxCAPSLowLoad
MaxCAPSMidLoad MAXCC
Max capability middle load SET CTRLPLNSHAREPARA(Optional) RNC MaxCC ADD SAALLNK(Optional) RNC
MaxCellInActiveSet MaxCmchPi MaxEcN0Value MaxEdchCellInActiveSet MaxEdchRetransNum MaxEFachUserNum MaxFachPower MAXFRAMELEN MaxGpsSats MaxHsdpaUserNum MaxHsupaUserNum
Max number of cell in active set RNC Max Common channel priority ADD FACH(Optional) RNC Maximum Ec/N0 Value SET RACHMEASUREPARA(Optional) RNC Max number of cell in EDCH active set SET HOCOMM(Optional) RNC Maximum Number of E-DCH PDUTYPRABOLPC(Mandatory) ADD retransfer RNC Maximum EFACH user number CELLCAC(Optional) RNC ADD Max transmit power of FACH ADD FACH(Optional) RNC Maximum Frame Length ADD IPPATH(Optional) RNC Maximum Num Of GPS SatellitesSMLC(Optional) SET RNC Maximum HSDPA user number CELLCAC(Optional) RNC ADD Maximum HSUPA user number CELLCAC(Optional) RNC ADD
RNC
PPP mux max mux-frame length RNC Maximum codes of uplink DPDCHNODEBLMTPARA(Optional) ADD RNC Max_NRP ADD SAALLNK(Optional) RNC Path max retransfer ADD SCTPLNK(Optional) RNC Max transmit power of PCPICH PCPICH(Optional) ADD RNC Max Poll Data Count ADD SAALLNK(Optional) RNC
MaxQueueTimeLen
PPP mux max son-frame length RNC Maximum Target Uplink load Factor ADD CELLHSUPA(Optional) RNC Maximum time for posave STR POSAVE(Optional) RNC ADD CELLSETUP(Optional) ADD QUICKCELLSETUP(Optio Max transmit power of cell nal) RNC Max UL TX power of background service ADD CELLCAC(Optional) RNC Max UL TX power of conversational service ADD CELLCAC(Optional) RNC Max UL TX power of interactive service ADD CELLCAC(Optional) RNC Max UL TX power of streaming service ADD CELLCAC(Optional) RNC Max user number of code adjust CELLLDR(Optional) RNC ADD
MBDRFlag
RNC
MBDRPrio MBFDCHKN MBFDLOCALIP MBFDSN MBFDSRN MbmsAF MBMSCCHDL MbmsChInd MbmsDecPowerRabThd MbmsInactTmr MbmsIubSharingSwitch MbmsMCC MbmsMNC MbmsNCellInd
The priority of MBDR neighbor cell RNC Check Check Index ADD IPRTBIND(Mandatory) RNC Multi hop BFD detect local ip STR IPCHK(Mandatory) RNC Check Slot No. ADD IPRTBIND(Mandatory) RNC Check Subrack No. ADD IPRTBIND(Mandatory) RNC AF of MBMS service SET ADMCTRL(Optional) RNC MBMS common channel service downlink factor ADD TRMFACTOR(Optional) RNC Mbms Channel Indicator ADD SCCPCHBASIC(Optional) RNC MBMS descend power rab threshold ADD CELLLDR(Optional) RNC Set mbms data check timer SET MBMSALARMPARA(Mandatory) RNC MBMS Iub Sharing switch SET MBMSSWITCH(Optional) RNC Mobile country code ADD MBMSALARMSERVICE(Mandatory) RNC Mobile network code ADD MBMSALARMSERVICE(Mandatory) RNC MBMS neighboring cell indicator INTRAFREQNCELL(Optional) ADD RNC
MbmsTransMode MBS
MBMS services number released CELLOLC(Optional) RNC ADD Mbms PreemptAlgoSwitch SET QUEUEPREEMPT(Optional) RNC Mbms Ptp UpLink Bit Rate SET RNCMBMSPARA(Optional) RNC ADD CELLMBMSSA(Mandator y) ADD MBMSSA(Mandatory) ADD SAMBMSPARA(Mandator y) MBMS SA ID RNC MBMS ServiceId ADD MBMSALARMSERVICE(Mandatory) RNC MBMS Control Switch SET MBMSSWITCH(Mandatory) RNC Max throughout of MBMS ACT LICENSE(Optional) RNC ADD CELLMBMSPARA(Option al) ADD SAMBMSPARA(Optional) SET RNCMBMSPARA(Optiona l) Mbms Transfer Mode RNC Max burst size ADD ATMTRF(Optional) RNC ADD CNOPERATOR(Mandator y) ADD LASNAMAP(Mandatory) ADD IMSISNAMAP(Mandatory) ADD GSMCELL(Mandatory) SET MBMSPERF(Mandatory)
MCC
RNC
McchAccessPeriodCoef
McchModPeriodCoef
Mcch Repetition Period coefficient SET MCCHPERIODCOEF(Optional) RNC MC PRI number ADD MPGRP(Optional) RNC Minimum cell rate ADD ATMTRF(Optional) RNC ADD ETHMD(Mandatory) ADD ETHMA(Mandatory)
MDIDX MDNAME
MD Index MD Name
MeasQuantityOf3A
3A Measure Quantity
MEPID MEPSN MEPTYPE MHF MichId MichPower MichSttdInd MINBW MinCmchPi MinDlChCodeLen MinEcN0Value
MinForAmrE
MEP Type ADD ETHMEP(Mandatory) RNC MP/MC list head option ADD MPGRP(Optional) RNC MICH ID ADD CELLMCCH(Mandatory) RNC MICH Power ADD CELLMCCH(Optional) RNC MICH STTD Indicator ADD CELLMCCH(Optional) RNC Min bandwidth ADD IPLOGICPORT(Mandatory) RNC Min Common channel priority ADD FACH(Optional) RNC Minimum SF of downlink DPCH NODEBLMTPARA(Optional) ADD RNC Minimum Ec/N0 Value SET RACHMEASUREPARA(Optional) RNC ADD CELLQUALITYMEAS(M andatory) SET QUALITYMEAS(Mandato ry) AMR Event E Reporting Period In Min RNC
MinForBeE
MinForBeF
ADD CELLQUALITYMEAS(M andatory) SET QUALITYMEAS(Mandato ry) BE Event E Reporting Period In Min RNC ADD CELLQUALITYMEAS(M andatory) SET QUALITYMEAS(Mandato ry) BE Event F Reporting Period In Min RNC
MinForDlBasicMeas
RNC
SET LDM(Mandatory) SET SATLDM(Mandatory) MinForDlOlcMeas DL OLC meas rprt cycle SET LDM(Mandatory) SET MinForHsdpaPrvidRateMeasHSDPA bit rate meas cycle SATLDM(Mandatory) SET LDM(Mandatory) SET SATLDM(Mandatory) MinForHsdpaPwrMeas HSDPA need pwr meas cycle
RNC
RNC
RNC
RNC
MinForUlBasicMeas
MinForUlOlcMeas
MinForVpE MINLNKNUM
RNC SET LDM(Mandatory) SET SATLDM(Mandatory) UL OLC meas rprt cycle RNC ADD CELLQUALITYMEAS(M andatory) SET QUALITYMEAS(Mandato ry) VP Event E Reporting Period In Min RNC Min Number of Links Activated IMAGRP(Optional) RNC ADD
Min transmit power of PCPICH PCPICH(Optional) ADD RNC Min interval of BFD packet receive STR IPCHK(Optional) RNC Min interval of BFD packet send IPCHK(Optional) STR RNC Minimum SF of uplink DPDCH NODEBLMTPARA(Optional) ADD RNC Max preamble loop ADD RACH(Optional) RNC
Mobile network code MOCN Control Switch MOCN Support Configure mode Backup mode System clock working mode Check mode
ADD CNOPERATOR(Mandator y) ADD GSMCELL(Mandatory) ADD LASNAMAP(Mandatory) ADD IMSISNAMAP(Mandatory) SET MBMSPERF(Mandatory)
RNC SET OPERATORSHARINGMODE(Optional) RNC SET OPERATORSHARINGMODE(Optional) RNC SET QUICKCFG(Mandatory) RNC SET MSP(Optional) RNC SET CLKMODE(Mandatory) RNC STR IPCHK(Mandatory) RNC
Signalling link mode ADD SCTPLNK(Mandatory) RNC AAL2 modifying indication timer AAL2TMR(Optional) RNC SET AAL2 modifying request timer AAL2TMR(Optional) RNC SET re-TX monitor period ADD TYPRABRLC(Optional) RNC DCCC Rate Up Fail Monitor SET DCCC(Optional) Time length RNC MP Dhcp Server IP ADD NODEBESN(Mandatory) RNC
ADD MPGRP(Mandatory) ADD MPLNK(Mandatory) MPGRPN MPS MPTYPE MPUSLOT MrIntraFreqPeriod MLPPP Group No. RNC Management proving status ADD SAALLNK(Optional) RNC MLPPP type ADD MPGRP(Optional) RNC MPU Slot No. ADD BRD(Optional) RNC MR Intra-freq Measurement period SET MRRNCCTRL(Optional) RNC
MRScopeCtrl MrSwitch
MrTrafficType MR Trace Traffic Type SET MRRNCCTRL(Optional) RNC MschSwitchForMtchMulti Msch Switch For MtchMulti SET MBMSSWITCH(Optional) Sccpch RNC MschSwitchForNonMtchMulti Msch Switch For NonMtchMulti Sccpch SET MBMSSWITCH(Optional) RNC MsgContent Msg Content ADD CELLCBSSAC(Mandatory) RNC MsgInd Message Indicator ADD CELLCBSSAC(Optional) RNC MSPCMD MSP Control Command SET MSPCMD(Mandatory) RNC
MtchMaxPwr
MtchMaxSf
MTCH maximal SF
MtchMinPerc0
ADD CELLCAC(Optional) RNC ADD CELLMBMSFACH(Option al) SET MBMSFACH(Optional) Mtch Minimal Power Percent for priority 0 RNC ADD CELLMBMSFACH(Option al) SET MBMSFACH(Optional) Mtch Minimal Power Percent for priority 15 RNC MTCH Multiplex Threshold SET RNCMBMSPARA(Optional) RNC Mtch Rohc Switch SET MTCH(Optional) RNC
MtchRsvPwr
MtchRsvSf MTRLGY
MTRLGY
MTRLGY
RNC
MTU
RNC
PPP mux frame group out-time RNC My discriminator of BFD STR IPCHK(Optional) RNC N1 ADD SAALLNK(Optional) RNC Constant 300 SET IDLEMODETIMER(Optional) RNC Constant 302 SET CONNMODETIMER(Optional) RNC Constant 304 SET CONNMODETIMER(Optional) RNC Constant 308 SET CONNMODETIMER(Optional) RNC SET CONNMODETIMER(Opti onal) SET IDLEMODETIMER(Optio nal) Constant 312 RNC Constant 313 SET CONNMODETIMER(Optional) RNC Constant 315 SET CONNMODETIMER(Optional) RNC Constant 381 SET CONNMODETIMER(Optional) RNC ADD MTP3RT(Mandatory) ADD MTP3LKS(Mandatory) ADD ADJNODE(Mandatory) ADD MTP3LNK(Mandatory) ADD M3DE(Mandatory) ADD M3LE(Mandatory) ADD M3LKS(Mandatory) ADD M3LNK(Mandatory) ADD M3RT(Mandatory) ADD N7DPC(Mandatory) ADD OPC(Mandatory)
NAME
RNC
NB01max
RNC
NB01min NBAmrRrcNum NBAPSRVPN NBATMOAMIP NBATMOAMMASK NBHighPriRrcNum NBIPOAMIP NBIPOAMMASK NBLB1 NBLB2
Random back-off lower limit ADD RACH(Optional) RNC AMR_RRC Number per Second for NodeB SET CALLSHOCKCTRL(Optional) RNC NBAP service listening port No. SCTPSRVPORT(Optional) SET RNC NodeB ATM_TRANS IP address NODEBIP(Mandatory)RNC ADD NodeB ATM_TRANS IP Mask NODEBIP(Mandatory)RNC ADD HiPri_RRC Number per Second for NodeB SET CALLSHOCKCTRL(Optional) RNC NodeB IP_TRANS IP address ADD NODEBIP(Mandatory)RNC NodeB IP_TRANS IP Mask ADD NODEBIP(Mandatory)RNC The First Serial Number ADD NODEBESN(Mandatory) RNC The Second Serial Number ADD NODEBESN(Mandatory) RNC
NBMCacAlgoSwitch
NBMLdcAlgoSwitch
NCellId NCellLdrRemainThd
NCellRncId NcMode
Set WPS user priority SET WPSALGO(Optional) RNC Set WPS Algorithm Switch SET WPSALGO(Optional) RNC NodeB Call Shock Trigger Threshold SET CALLSHOCKCTRL(Optional) RNC NodeB TransType ADD NODEBIP(Mandatory)RNC Network color code ADD GSMCELL(Mandatory) RNC ADD INTERFREQNCELL(Man datory) ADD INTRAFREQNCELL(Man datory) Neighboring cell ID RNC Cell Dynamic ShutDown Neighbour Cell Load Remain threshold ADD CELLDYNSHUTDOWN(Optional) RNC ADD INTRAFREQNCELL(Man datory) ADD INTERFREQNCELL(Man datory) RNC ID of a neighboring cell RNC Network Control Mode ADD GSMCELL(Optional) RNC ADD CELLMBMSPARA(Option al) ADD SAMBMSPARA(Optional) SET RNCMBMSPARA(Optiona l) Counting Threshold RNC NCOV Reloc Ind based on GSM cell load SET INTERRATHONCOV(Optional) RNC Non-HCS NCR ADD CELLSELRESEL(Optional) RNC Adjacent flag ADD N7DPC(Optional) RNC Forward route address ADD BAMIPRT(Mandatory) RNC ADD IPRT(Mandatory) ADD IPRTBIND(Mandatory)
NEXTHOP
RNC
NFastSpdEst NI
RNC RNC
Num of continuous in sync ind ADD CELLSETUP(Optional) RNC Network mode of operation ADD CNDOMAIN(Optional) RNC Timer NNSF SET OPERATORCFGPARA(Optional) RNC NodeB Cab No. STR NODEBBWRPT(Mandatory) RNC NodeB Max HSDPA User NumberNODEBALGOPARA(Optional) ADD RNC NodeB Max HSUPA User NumberNODEBALGOPARA(Optional) ADD RNC ADD NODEB(Mandatory) ADD ADJNODE(Mandatory) SET MRSCOPECTRL(Mandato ry) ADD NODEBIP(Mandatory) ADD NODEBESN(Mandatory) STR NODEBDETECT(Mandato ry) RNC STR NODEBBWRPT(Mandatory) RNC
NodeBId NODEBIMAGRPN
NodeBLdcAlgoSwitch
ADD NODEB(Mandatory) ADD NBNODESYNCMONPAR A(Mandatory) ADD LOCELL(Mandatory) ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Man datory) ADD NODEBLDR(Mandatory) ADD NODEBALGOPARA(Man datory) ADD IPDL(Mandatory) ADD NCP(Mandatory) ADD CCP(Mandatory) ADD NODEBOLC(Mandatory) STR NODEBBWRPT(Mandator NodeBName NodeB name RNC y) NodeBProtclVer NodeB Protocol version ADD NODEB(Optional) RNC NODEBRPTPERIOD Report period STR NODEBBWRPT(Optional) RNC NODEBRPTTYPE Report type STR NODEBBWRPT(Optional) RNC NODEBSN NodeB Slot No. STR NODEBBWRPT(Mandatory) RNC NODEBSRN NodeB Subrack No. STR NODEBBWRPT(Mandatory) RNC NODEBSUBBRDTYPE NodeB Subboard type STR NODEBBWRPT(Mandatory) RNC NodeBType NodeB Type ADD NODEB(Optional) RNC NodeSyncPeriod Measurement period ADD NBNODESYNCMONPARA(Mandatory) RNC NodeSyncTime Measurement start time ADD NBNODESYNCMONPARA(Mandatory) RNC NODET Adjacent Node Type ADD ADJNODE(Mandatory) RNC NodeType Small-scaled base station type ADD NODEBLMTPARA(Mandatory) RNC NonhcsInd Non-HCS indicator ADD CELLSELRESEL(Optional) RNC NonServToTotalEdchPwrRatio Target Non-serving E-DCH to Total E-DCH Power ratio RNC ADD CELLHSUPA(Optional) NOutsyncInd Num of continuous out of sync ind CELLSETUP(Optional) ADD RNC
NPrio
RNC
NPrio
NPrioFlag
RNC
NPtpToPtmOffset
RNC
NRI
NRncId
Neighboring RNC ID
ADD NRNC(Mandatory) ADD NRNCURA(Mandatory) ADD NRNCCELL(Mandatory) ADD RNCPOOLMEMBER(Man datory) RNC
NSAP
NSAP
RNC
NSlowSpdEst NullNRI
Threshold for UE slow speed decision RNC NullNRI VALUE SET OPERATORCFGPARA(Optional) RNC
NumberOfACs
RNC
ADD PPPLNK(Optional) SET ETHPORT(Optional) ADD MPGRP(Optional) ADD IPLOGICPORT(Optional) OAMFLOWBW OAMFLOWDSCP OAMMINBWKEY OffQoffset1Heavy OffQoffset1Light OffQoffset2Heavy OffQoffset2Light OffSinterHeavy OffSinterLight OAM flow minimum bandwidth RNC DSCP of OAM flow SET QUEUEMAP(Mandatory) RNC OAM flow min bandwidth switch QUEUEMAP(Optional)RNC SET Qoffset1 offset 2 ADD CELLPUC(Optional) RNC Qoffset1 offset 1 ADD CELLPUC(Optional) RNC Qoffset2 offset 2 ADD CELLPUC(Optional) RNC Qoffset2 offset 1 ADD CELLPUC(Optional) RNC Sintersearch offset 2 ADD CELLPUC(Optional) RNC Sintersearch offset 1 ADD CELLPUC(Optional) RNC
OlcPeriodTimerLen
RNC
OperatorType OppositeTrchType
Operator Type ADD CNOPERATOR(Mandatory) RNC Opposite direction transport channel type ADD TYPRABRLC(Mandatory) RNC
Map mode of opt and DS1 SET COPTLNK(Optional) RNC Optional IE Send Switch SET SMLC(Optional) RNC Optical interface standard SET OPT(Optional) RNC Cell Center Orientation Of Major Axis ADD SMLCCELL(Mandatory) RNC Operation type LOD PATCH(Optional) RNC OTDOA Method Active FlagADD SMLCCELL(Optional)RNC OTDOA Method Type SET SMLC(Optional) RNC
OverLay Network Mobility Flag NRNCCELL(Optional)RNC ADD AAL2 Path ownership ADD AAL2PATH(Optional)RNC Destination ATM address ownership ADD AAL2RT(Optional) RNC IP Path check flag ADD IPPATH(Optional) RNC
PATHID
AAL2 Path ID ADD IPPATH(Mandatory) ACT IPPM(Mandatory) ADD IPPATHBIND(Mandatory) ADD IPPATH(Optional) LOD PATCH(Mandatory) ADD PCH(Optional)
RNC
PCPICHPower PCPICHPowerPace
PCPICH transmit power RNC Pilot power adjustment step ADD CELLLDB(Optional) RNC
PCR
ADD ATMTRF(Optional)
RNC
PDUSize
ACT ETHOAMAH(Optional) RNC ADD QUICKCELLSETUP(Man datory) ADD CELLSETUP(Mandatory) RNC Peer Cell ID Peer IP address ADD PPPLNK(Mandatory) RNC Peer IP address ADD MPGRP(Mandatory) RNC Peer IP STR IPLOPTST(Mandatory)RNC First destination IP address ADD SCTPLNK(Mandatory) RNC Second destination IP address ADD SCTPLNK(Optional) RNC
PEERIPADDR PEERIPADDR
RNC ADD IPPATH(Mandatory) RNC ADD QUICKCELLSETUP(Optio nal) ADD CELLSETUP(Optional) Peer Cell Is Valid Or Not RNC Peer subnet mask ADD IPPATH(Optional) RNC Peer NodeB ID ADD NODEB(Mandatory) RNC Destination SCTP port No. ADD SCTPLNK(Mandatory) RNC Peer RNC ID ADD NODEB(Mandatory) RNC Peer type ADD IPOAPVC(Mandatory)RNC
ADD CELLINTERRATHOCOV (Optional) ADD CELLINTERRATHONCO V(Optional) SET INTERRATHOCOV(Optio nal) SET INTERRATHONCOV(Opt ional) PenaltyTimeForPhyChFail Inter-Rat HO physical channel failure penalty timer RNC PenaltyTimer Inter-RAT Penalty timer length ADD CELLMBDRINTERRAT(Optional) RNC PendingTime4A Pending time after trigger 4AADD TYPRABDCCCMC(Optional) RNC PendingTime4B Pending time after trigger 4BADD TYPRABDCCCMC(Optional) RNC PendingTimeA Event A pending time after trigger TYPRABRLC(Optional) ADD RNC PendingTimeB Event B pending time after trigger TYPRABRLC(Optional) ADD RNC PERIOD Ping Check Period ADD IPPATH(Optional) RNC
PeriodFor2B
RNC
PeriodFor2C
RNC
PeriodFor3A
RNC
PeriodFor3C
RNC ADD CELLINTRAFREQHO(Op tional) SET INTRAFREQHO(Optional) RNC PeriodMRReportNumfor1A 1A event to periodical rpt number ADD CELLINTRAFREQHO(Op tional) SET INTRAFREQHO(Optional) RNC PeriodMRReportNumfor1C 1C event to periodical rpt number ADD CELLINTRAFREQHO(Op tional) SET INTRAFREQHO(Optional) RNC PeriodMRReportNumfor1J 1J event to periodical rpt number SET LDM(Optional) SET SATLDM(Optional) RNC PeriodProtectTimerCoeff Period common measure protect timer coeff PersistScalingFactor Persist Scaling Factor ADD PRACHASC(Mandatory) RNC ADD PPPLNK(Optional) ADD MPLNK(Optional) PFC PHB PHB Protocol field compress PHB Per-Hop Behavior RNC ACT IPPM(Mandatory) RNC SET PHBMAP(Mandatory) RNC
PhyChId PhyChIdforMcch PICHId PICHMode PICHPowerOffset PIUSN PKTCOUNT PKTLEN PKTMAXLEN PKTSIZE PKTSIZE
SCCPCH ID SCCPCH ID for MCCH PICH ID PICH mode PICH power offset Piu Slot No. PKT Count PKT Size Max Packet Length Size of packet PKT Size
ADD SCCPCHBASIC(Mandator y) ADD PCCPCH(Optional) ADD AICH(Optional) ADD RACH(Optional) ADD PCPICH(Optional) ADD SCCPCHTFC(Mandatory) ADD PCH(Mandatory) ADD PRACHACTOASCMAP(O ptional) ADD PRACHSLOTFORMAT(O ptional) ADD PRACHASC(Optional) ADD PICH(Mandatory) ADD FACH(Mandatory) ADD PRACHTFC(Optional) ADD PRACHBASIC(Optional) ADD PSCH(Optional) ADD SSCH(Optional)
RNC ADD CELLMCCH(Mandatory) RNC ADD PICH(Optional) RNC ADD PICH(Optional) RNC ADD CHPWROFFSET(Optional) RNC STR IPLOPTST(Mandatory)RNC STR ETHOAMLOOPTST(Optional) RNC STR ETHOAMLOOPTST(Optional) RNC STR IPLOPTST(Optional) RNC PING IP(Optional) RNC PING MAC(Optional) RNC
ADD LAC(Mandatory) ADD RAC(Mandatory) PlmnValTagMax Max PLMN value tag RNC
ADD LAC(Mandatory) ADD RAC(Mandatory) PlmnValTagMin PLPRD PLTH PMPRD Min PLMN value tag RNC Packet lost measure period ADD IPLOGICPORT(Optional) RNC Packet discard threshold ADD IPLOGICPORT(Optional) RNC IPPM packet send period ACT IPPM(Optional) RNC
SET ETHPORT(Optional) SET MSPCMD(Mandatory) CLR MSPREP(Optional) SET OPTLOP(Mandatory) SWP ETHPORT(Mandatory) SET MSP(Mandatory) ACT MSP(Optional) SET OPT(Optional) SET COPTLNK(Mandatory) ACT ETHPORT(Mandatory) ADD ETHREDPORT(Mandatory ) ADD ETHIP(Mandatory) ADD IPLOGICPORT(Mandatory ) ADD CCP(Mandatory)
PN PN PN PN PN PN PN POINTDESINFO POINTNAME
Port No. Port No. Port No. Port NO. Port No. Port No. Port No. Rollbackpoint Description Rollbackpoint Name
RNC SET SCUPORT(Optional) RNC ACT ETHOAMAH(Mandatory) RNC ADD ETHMEP(Optional) RNC STR ETHOAMLOOPTST(Mandatory) RNC STR IPCHK(Mandatory) RNC SET ALMPORT(Mandatory)RNC ADD ROLLBACKPOINT(Optional) RNC ADD ROLLBACKPOINT(Mandatory) RNC
PollTimerLen POLLTMR Port PORTPROTYPE PORTTYPE POWER_RELAY1 POWER_RELAY2 POWER_RELAY3 POWER_RELAY4 POWER_RELAY5
Poll timer length Timer_Poll Destination Port Port protocol type Port Type Switch for Relay 1 Switch for Relay 2 Switch for Relay 3 Switch for Relay 4 Switch for Relay 5
SET QUEUEPREEMPT(Optional) RNC ADD SAALLNK(Optional) RNC ADD FTPSCLTDPORT(Mandatory) RNC ADD PORTFLOWCTRLPARA(Mandatory) RNC ADD ETHMEP(Mandatory) RNC ADD EMU(Optional) RNC ADD EMU(Optional) RNC ADD EMU(Optional) RNC ADD EMU(Optional) RNC ADD EMU(Optional) RNC
Switch for Relay 6 Power offset Power increase step PPP Dhcp Server IP PPP link No.
ADD EMU(Optional) RNC ADD PRACHTFC(Mandatory) RNC ADD PRACHBASIC(Optional) RNC ADD NODEBESN(Mandatory) RNC ADD IPLOGICPORT(Mandatory) RNC ADD PPPLNK(Optional) ADD MPLNK(Mandatory)
PPPLNKN
RNC
Inter-frequency measure periodical rpt period RNC Max preamble retransmissionADD PRACHBASIC(Optional) RNC Preamble signatures ADD PRACHBASIC(Mandatory) RNC Preempt algorithm switch SET QUEUEPREEMPT(Optional) RNC PreemptRefArpSwitch SET QUEUEPREEMPT(Optional) RNC
Priority PRIORITY
RNC RNC
PRIORITY
RNC
PriorityReference PriorityServiceForExtRab
Integrate Priority Configured SET USERPRIORITY(Optional) Reference RNC Service priority of Other service SPG(Optional) ADD RNC
Service priority of HSDPA service SPG(Optional) ADD RNC Service priority of HSUPA service SPG(Optional) ADD RNC Service priority of R99 NRT ADD SPG(Optional) service RNC Service priority of R99 RT service SPG(Optional) ADD RNC Processing duration ADD RNCALLCELLBLK(Mandatory) RNC
PROCESSSWITCH
Process switch
PROT
ADD N7DPC(Optional)
RNC
ProtectTmrForBac
Background service T2
ProtectTmrForCon
Conversational service T2
ProtectTmrForImsSig
IMS signal T2
ProtectTmrForInt
Interactive service T2
ProtectTmrForStr PS PsBeProcType
Streaming service T2 SET PSINACTTIMER(Optional) RNC Port select SET OPT(Mandatory) RNC Handover Type for PS BE Traffic NRNC(Optional) ADD RNC
PSBKGDL
PSBKGPRIPATH PSBKGPRITH
R99 PS background primary path TRMMAP(Optional) RNC ADD R99 PS background pri path load threshold ADD LOADEQ(Optional) RNC
R99 PS background secondary pathTRMMAP(Optional) RNC ADD R99 PS background pri sec path load ratio threshold ADD LOADEQ(Optional) RNC R99 PS background service uplink TRMFACTOR(Optional) ADD factor RNC PSCH transmit power ADD PSCH(Optional) RNC R99 PS conversational service downlink factor ADD TRMFACTOR(Optional) RNC
PSCONVPRIPATH
PSCONVPRITH
RNC
R99 PS conversational secondary path ADD TRMMAP(Optional) RNC R99 PS conversational pri sec path LOADEQ(Optional) RNC ADD load ratio threshold R99 PS conversational service uplink factor ADD TRMFACTOR(Optional) RNC ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Man datory) ADD PScrambCode DL primary scrambling codeNRNCCELL(Mandatory) RNC PSHIGHINTERACTPRITH R99 PS high interactive pri path load threshold ADD LOADEQ(Optional) RNC PSHIGHINTERACTSECWHT PS high interactive pri sec path load ratio threshold RNC R99 ADD LOADEQ(Optional)
PSHOOut2GloadThd
RNC
PsInactTmrForBac
Background service T1
PsInactTmrForCon
Conversational service T1
PSInactTmrForImsSig
IMS signal T1
PsInactTmrForInt
Interactive service T1
Streaming service T1 SET PSINACTTIMER(Optional) RNC PS Information Update Switch OPERATORCFGPARA(Optional) SET RNC PS Information Update Protection OPERATORCFGPARA(Mandatory) SET Timer RNC R99 PS interactive service downlink factor ADD TRMFACTOR(Optional) RNC R99 PS interactive service uplink factor ADD TRMFACTOR(Optional) RNC
PSINTHGHPRIPATH
PSINTHGHSECPATH
PSINTLOWPRIPATH
PSINTLOWSECPATH
PSINTMIDPRIPATH
PSINTMIDSECPATH R99 PS middle PRI interactive secondary path ADD TRMMAP(Optional) PSLOWINTERACTPRITH R99 PS low interactive pri path load threshold ADD LOADEQ(Optional) PSLOWINTERACTSECWHT PS low interactive pri sec pathLOADEQ(Optional) R99 ADD load ratio threshold PSMIDINTERACTPRITH R99 PS mid interactive pri path load threshold ADD LOADEQ(Optional) PSMIDINTERACTSECWHT PS mid pri sec path loadADD threshold R99 ratio LOADEQ(Optional)
PsRestriction
Feature Supporting Mode of PS Domain SET OPERATORCFGPARA(Optional) RNC Length of PS NRI in bits SET OPERATORCFGPARA(Mandatory) RNC PS call drop ratio Per Spu SET KPIALMTHD(Optional) RNC The minimum of PS Rab attempt setup Per Spu SET KPIALMTHD(Optional) RNC PS Rab successful setup ratioSET Spu Per KPIALMTHD(Optional) RNC The number of PS drop Per Spu KPIALMTHD(Optional) SET RNC SET DSACAUTOALGO(Mand atory) ADD CELLDSACMANUALPA RA(Mandatory) Restriction for PS RNC
PSServiceHOSwitch PSSTRMDL
Inter-RAT PS handover switch ADD CELLHOCOMM(Optional) RNC R99 PS streaming service downlinkTRMFACTOR(Optional) ADD factor RNC
PSSTRMPRIPATH PSSTRMPRITH
R99 PS streaming primary path ADD TRMMAP(Optional) RNC R99 PS streaming pri path load threshold ADD LOADEQ(Optional) RNC
R99 PS streaming secondary ADD TRMMAP(Optional) RNC path R99 PS streaming pri sec path load LOADEQ(Optional) RNC ADD ratio threshold R99 PS streaming service uplink factor ADD TRMFACTOR(Optional) RNC
PS rate negotiation switch Max throughput of PS Port Type NodeB Interface IP Address NodeB Interface IP Mask
SET CORRMALGOSWITCH(Optional) RNC ACT LICENSE(Optional) RNC SET ALMPORT(Mandatory)RNC ADD NODEBESN(Mandatory) RNC ADD NODEBESN(Mandatory) RNC
Ptm Null Stream Passivity Switch RNCMBMSPARA(Optional) SET RNC Ptm Preempt Switch SET RNCMBMSPARA(Optional) RNC Ptm Stream Passivity Switch SET RNCMBMSPARA(Optional) RNC Port type SET ETHPORT(Mandatory) RNC SET LDM(Optional) PUC smoothing filter length SET SATLDM(Optional) RNC
PUC period timer length RNC Punish Time SET RNCMBMSPARA(Optional) RNC Power control algorithm selection FRC(Optional) SET RNC Min DSCP of queue 0 SET QUEUEMAP(Optional)RNC Min DSCP of queue 1 SET QUEUEMAP(Optional)RNC Min DSCP of queue 2 SET QUEUEMAP(Optional)RNC Min DSCP of queue 3 SET QUEUEMAP(Optional)RNC Min DSCP of queue 4 SET QUEUEMAP(Optional)RNC Qaal2 Protocol Version ADD ADJNODE(Optional) RNC
Qhcs
RNC
Qhyst1sfach
Qhyst1spch
Qhyst2sfach
Qhyst2spch
Qoffset1sn
Qoffset1sn
Qqualmin
QqualminInd
ADD NRNCCELL(Optional)RNC
Qrxlevmin
Min RX level
Qrxlevmin
ADD GSMNCELL(Optional) RNC ADD CELLSELRESEL(Optional ) ADD Min Rx level RNC NRNCCELL(Mandatory) ADD CELLSELRESEL(Optional ) ADD Min Rx level Extend Support RNC NRNCCELL(Optional) Min RX level ind ADD NRNCCELL(Optional)RNC Cell Sel-reselection quality measure ADD CELLSELRESEL(Optional) RNC Queue algorithm switch SET QUEUEPREEMPT(Optional) RNC Queue length SET QUEUEPREEMPT(Optional) RNC ADD TYPRABOLPC(Mandatory ) ADD TYPRABDCCCMC(Mand atory) ADD TYPRABRLC(Mandatory) ADD TYPRABHSPA(Mandatory ) ADD TYPRABBASIC(Mandator y) ADD TYPRABQUALITYMEAS (Mandatory) Service parameter index RNC Rab Modify Timer Length SET COIFTIMER(Optional) RNC
RabIndex RabModifyTimerLen
ADD RAC(Mandatory) ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Man datory) ADD GSMCELL(Mandatory) ADD NRNCCELL(Mandatory) Routing area code RNC RACH sub channel no. ADD PRACHBASIC(Mandatory) RNC Trafc SET IUTIMERANDNUM(Optional) RNC RAN Sharing Support SET OPERATORSHARINGMODE(Optional) RNC Inter-RAT cell type ADD GSMCELL(Mandatory) RNC Tratc SET IUTIMERANDNUM(Optional) RNC ADD FACH(Optional) ADD RACH(Optional) ADD PCH(Optional) Rate matching attribute RNC DL TF rate recover timer length CELLOLC(Optional) RNC ADD DL TF rate restrict coefficient ADD CELLOLC(Optional) RNC DL TF rate restrict timer length CELLOLC(Optional) RNC ADD BEG FORWARD(Mandatory) BEG ROLLBACK(Mandatory) name of rollback point RNC type of rollback point BEG FORWARD(Mandatory) RNC Wait RB reconfiguration response STATETIMER(Optional) SET timer RNC Wait RB release response timer STATETIMER(Optional) SET RNC Wait RB setup response timer SET STATETIMER(Optional) RNC Rate down coefficient ADD IPLOGICPORT(Optional) RNC Recounting Period SET RNCMBMSPARA(Optional) RNC DL TF rate recover coefficient ADD CELLOLC(Optional) RNC
RECOVERTHD RED
Decrease rate alarm recover threshold ADD IPLOGICPORT(Optional) RNC Backup ADD BRD(Mandatory) RNC
ReDirBandInd
RNC
RedirFactorOfLDR
RNC
RedirFactorOfNorm
RedirSwitch
Redirection Factor Of Normal RNC SET REDIRECTION(Optional) ADD CELLREDIRECTION(Opti onal) Redirection Switch RNC
ReDirUARFCNDownlink
RNC
ReDirUARFCNUplink
RNC
ReDirUARFCNUplinkInd
RNC
REF2MCLKSRC
RNC
REF2MCLKSRCBAK REF2MCLKSW1 REF2MCLKSW2 RegByFachSwitch ReHostPolicy RELINDTMR RelocAnotherTmr RelocCmdTmr RelocCommitTmr RelocDataFwdTmr RelocFailIuRelCmdTmr RelocIuRelCmdTmr RelocMobilConfTmr RelocPhychRecfgTmr RelocUtranHoCmpTmr RELREQTMR
Backup clock source of output clock SET CLK(Optional) RNC Output switch of 2M output clock CLK(Optional) SET 1 RNC Output switch of 2M output clock CLK(Optional) SET 2 RNC Register Bear by Fach Switch SET CALLSHOCKCTRL(Optional) RNC Re-host Policy Type SET POOLPRIMHOSTPOLICY(Optional) RNC Release indication timer SET AAL2TMR(Optional) RNC Relocation another request timer STATETIMER(Optional) SET RNC Relocation Command timer SET STATETIMER(Optional) RNC Relocation commit timer SET STATETIMER(Optional) RNC Relocation data forwarding timer STATETIMER(Optional) SET RNC Relocation failed Iu release command timer SET STATETIMER(Optional) RNC Relocation Iu release command timer SET STATETIMER(Optional) RNC Relocation mobile info confirmation timer SET STATETIMER(Optional) RNC Relocation PhyCh reconfiguration STATETIMER(Optional) SET timer RNC Relocation Inter-RAT HO completion timer SET STATETIMER(Optional) RNC Release request timer SET AAL2TMR(Optional) RNC
RelThdForDwnGrd
REMARK
RNC ADD LOADEQ(Mandatory) ADD TRMMAP(Optional) ADD TRMFACTOR(Mandatory) RNC SET RNCCBPARA(Optional) RNC SET RNCCBPARA(Optional) RNC
ReportIntervalfor1A
ReportIntervalfor1C
ADD CELLINTRAFREQHO(Op tional) SET INTRAFREQHO(Optional) RNC 1A event to periodical rpt period ADD CELLINTRAFREQHO(Op tional) SET INTRAFREQHO(Optional) RNC 1C event to periodical rpt period ADD CELLINTRAFREQHO(Op tional) SET INTRAFREQHO(Optional) RNC 1J event to periodical rpt period Required 2G Capability ADD TYPRABBASIC(Mandatory) RNC CORRM Algo reserved switch 0 CORRMALGOSWITCH(Optional) SET RNC CORRM Algo reserved switch 1 CORRMALGOSWITCH(Optional) SET RNC CORRM Algo reserved U32 SET CORRMALGOSWITCH(Optional) Para 0 RNC CORRM Algo reserved U32 SET CORRMALGOSWITCH(Optional) Para 1 RNC CORRM Algo reserved U8 Para 0CORRMALGOSWITCH(Optional) SET RNC CORRM Algo reserved U8 Para 1CORRMALGOSWITCH(Optional) SET RNC Reset request timer SET AAL2TMR(Optional) RNC ADD PPPLNK(Optional) ADD MPLNK(Optional)
son-protocol confer out time RNC Restriction Type ADD CELLDSACMANUALPARA(Mandatory) RNC re-TX measure filter coef ADD TYPRABRLC(Optional) RNC BIT MAP of retry HSPA PLUS character SET FRC(Optional) RNC
RlcMode
RLC size RL Max DL TX power RL Min DL TX power RL reconfiguration timer RL release timer RL restoration timer RL setup response timer
ADD FACHDYNTFS(Mandatory ) ADD PCHDYNTFS(Mandatory) ADD RACHDYNTFS(Mandator y) RNC ADD CELLRLPWR(Mandatory) RNC ADD CELLRLPWR(Mandatory) RNC SET STATETIMER(Optional) RNC SET STATETIMER(Optional) RNC SET STATETIMER(Optional) RNC SET STATETIMER(Optional) RNC ADD CELLINTRAFREQHO(Ma ndatory) ADD INTRAFREQNCELL(Man datory) ADD INTERFREQNCELL(Man datory) ADD GSMNCELL(Mandatory) ADD SMLCCELL(Mandatory) RST IUR(Mandatory) ADD RNCBASIC(Mandatory) ADD GPS(Mandatory) RST RNC(Mandatory) RNC ADD CBSADDR(Mandatory) RNC ADD RNCPOOL(Mandatory) ADD RNCPOOLMEMBER(Mandatory) RNC ADD RNCPOOL(Mandatory) RNC ADD NRNC(Mandatory) RNC
RNC ID CBS RNC IP address RncPool Index RncPool Name RNC protocol version
RPTTHD Decrease rate alarm report threshold ADD IPLOGICPORT(Optional) RNC RrcCause Cause of RRC connection establishment SET RRCESTCAUSE(Mandatory) RNC RrcConnEstabAttMinNum The minimum of Rrc connection request Per Spu SET KPIALMTHD(Optional) RNC RrcConnEstabSuccRatioThd Rrc connection successful ratio Per Spu SET KPIALMTHD(Optional) RNC RrcConnRejWaitTmr Wait Time In RRC Connection Reject Message SET STATETIMER(Optional) RNC RrcInitDtTmr RRC initial DT timer SET STATETIMER(Optional) RNC RrcIuRelCmdTmr RRC Iu release command timer STATETIMER(Optional) SET RNC RrcPaingType1Tmr RRC paging type 1 response SET STATETIMER(Optional) timer RNC RrcRelRetranTmr RRC release retransmission timer STATETIMER(Optional) SET RNC
RRC RLC completion acknowledgement timer SET STATETIMER(Optional) RNC RRC security mode completion timer SET STATETIMER(Optional) RNC RRC UE response timer SET STATETIMER(Optional) RNC Add To Rscgrp Flag ADD AAL2PATH(Mandatory) RNC Rscgrp No. ADD AAL2PATH(Mandatory) RNC Rscgrp No. ADD IPPATH(Mandatory) RNC Resource Management ModeADD NODEB(Optional) RNC ADD IPLOGICPORT(Mandatory ) ADD RSCGRP(Mandatory) ADD ATMLOGICPORT(Option Resource management modeal) RNC Lock Reason LCK CMCTRL(Mandatory) RNC Timer_No-Response ADD SAALLNK(Optional) RNC
CN Type by Reset RST IU(Mandatory) RNC Restart switch ADD OPC(Optional) RNC Times of resending reset message IUTIMERANDNUM(Optional) SET to CN RNC Reset Type RST IUR(Mandatory) RNC Reserved parameter 1 SET RRCTRLSWITCH(Optional) RNC Reserved parameter 1 ADD NRNC(Optional) RNC Reserved parameter 1 ADD CNNODE(Optional) RNC Reserved Parameter 1 SET DEVPATCHPARA(Optional) RNC ADD CELLALGOSWITCH(Opti onal) ADD NODEBALGOPARA(Opti onal) SET CACALGOSWITCH(Optio nal)
RsvdPara1 RsvdPara1 RSVDPARA10 RsvdPara10 RsvdPara11 RsvdPara12 RsvdPara13 RsvdPara14 RsvdPara15 RsvdPara16 RsvdPara2 RsvdPara2
Reserved parameter 1 Reserved Parameter1 Reserved Parameter 10 Reserved Parameter10 Reserved Parameter11 Reserved Parameter12 Reserved Parameter13 Reserved Parameter14 Reserved Parameter15 Reserved Parameter16 Reserved parameter 2 Reserved parameter 2
RNC SET DPUCFGDATA(Optional) RNC SET DEVPATCHPARA(Optional) RNC SET DPUCFGDATA(Optional) RNC SET DPUCFGDATA(Optional) RNC SET DPUCFGDATA(Optional) RNC SET DPUCFGDATA(Optional) RNC SET DPUCFGDATA(Optional) RNC SET DPUCFGDATA(Optional) RNC SET DPUCFGDATA(Optional) RNC ADD NRNC(Optional) RNC ADD CNNODE(Optional) RNC
RSVDPARA2
SET DEVPATCHPARA(Optional) RNC ADD CELLALGOSWITCH(Opti onal) ADD NODEBALGOPARA(Opti onal) SET CACALGOSWITCH(Optio nal) RsvdPara2 Reserved parameter 2 RNC RsvdPara2 Reserved Parameter2 SET DPUCFGDATA(Optional) RNC RSVDPARA3 Reserved Parameter 3 SET DEVPATCHPARA(Optional) RNC ADD CELLALGOSWITCH(Opti onal) ADD NODEBALGOPARA(Opti onal) SET CACALGOSWITCH(Optio nal) RsvdPara3 Reserved parameter 3 RNC RsvdPara3 Reserved Parameter3 SET DPUCFGDATA(Optional) RNC RSVDPARA4 Reserved Parameter 4 SET DEVPATCHPARA(Optional) RNC RsvdPara4 Reserved Parameter4 SET DPUCFGDATA(Optional) RNC RSVDPARA5 Reserved Parameter 5 SET DEVPATCHPARA(Optional) RNC RsvdPara5 Reserved Parameter5 SET DPUCFGDATA(Optional) RNC RSVDPARA6 Reserved Parameter 6 SET DEVPATCHPARA(Optional) RNC RsvdPara6 Reserved Parameter6 SET DPUCFGDATA(Optional) RNC RSVDPARA7 Reserved Parameter 7 SET DEVPATCHPARA(Optional) RNC RsvdPara7 Reserved Parameter7 SET DPUCFGDATA(Optional) RNC RSVDPARA8 Reserved Parameter 8 SET DEVPATCHPARA(Optional) RNC RsvdPara8 Reserved Parameter8 SET DPUCFGDATA(Optional) RNC RSVDPARA9 Reserved Parameter 9 SET DEVPATCHPARA(Optional) RNC RsvdPara9 Reserved Parameter9 SET DPUCFGDATA(Optional) RNC RT Revertive type SET MSP(Optional) RNC ADD M3LE(Optional) ADD M3DE(Optional) RTCONTEXT Routing Context RNC RTCPBWRatio RATE OF RTCP BANDWIDTH CNNODE(Optional) RNC ADD RtCpc2EFachStateTransTimer Realtime CPC to E_FACH Transition Timer SET UESTATETRANSTIMER(Optional) RNC RtCpc2FStateTransTimer Realtime CPC to FACH Transition Timer SET UESTATETRANSTIMER(Optional) RNC RTCPSwitch RTCP SWITCH ADD CNNODE(Optional) RNC RTDEST Destination network address ADD BAMIPRT(Mandatory) RNC RTDESTMASK Destination address mask ADD BAMIPRT(Mandatory) RNC RtDH2EFachStateTransTimer Realtime DCH or HSPA to E_FACH Transition Timer RNC SET UESTATETRANSTIMER(Optional) RtDH2FStateTransTimer Realtime DCH or HSPA To FACH Transition Timer SET UESTATETRANSTIMER(Optional) RNC RtDH2FTvmPTAT RT D/HSPA2F 4B Pending Time UESTATETRANS(Optional) SET RNC
Reserved Parameter 2
RtDH2FTvmThd RtDH2FTvmTimeToTrig
RT D/HSPA2F 4B Threshold SET UESTATETRANS(Optional) RNC RT D/HSPA2F 4B Time SET UESTATETRANS(Optional) RNC
RtEFach2CpcTvmThd RT E_FACH2CPC_HSPA 4A Threshold SET UESTATETRANS(Optional) RNC RtEFach2CpcTvmTimeToTrig E_FACH2CPC_HSPA 4A Time RT SET UESTATETRANS(Optional) RNC
RtEFach2DHTvmThd RT E_FACH2D/HSPA 4A Threshold SET UESTATETRANS(Optional) RNC RtEFach2DHTvmTimeToTrig E_FACH2D/HSPA 4A Time UESTATETRANS(Optional) RT SET RNC
RtF2CpcTvmThd RtF2CpcTvmTimeToTrig
RT F2CPC_HSPA 4A Threshold UESTATETRANS(Optional) SET RNC RT F2CPC_HSPA 4A Time SET UESTATETRANS(Optional) RNC
RT F2D/HSPA 4A Threshold SET UESTATETRANS(Optional) RNC RT F2D/HSPA 4A Time SET UESTATETRANS(Optional) RNC RTO alpha value ADD SCTPLNK(Optional) RNC RTO beta value ADD SCTPLNK(Optional) RNC RTO initial value ADD SCTPLNK(Optional) RNC RTO max value ADD SCTPLNK(Optional) RNC RTO min value ADD SCTPLNK(Optional) RNC Route index ADD AAL2RT(Optional) RNC
Rate up step Rate up step adjust period Backward bandwidth Backward bandwidth Backward Bandwidth
ADD IPLOGICPORT(Optional) RNC ADD IPLOGICPORT(Optional) RNC ADD ATMLOGICPORT(Mandatory) RNC ADD IPPATH(Mandatory) RNC ADD RSCGRP(Mandatory) RNC
RXTRFX
RNC
RxTxtoTrig6F
SAALLNKN
RNC
SAC SATELLITEIND
Saal Link No. RNC Interface type ADD SAALLNK(Mandatory) RNC SAAL link connection timer SET MTP3TMR(Optional) RNC ADD SAC(Mandatory) ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Man datory) ADD CZ(Mandatory) Service area code RNC Satellite Trans Ind ADD NODEB(Optional) RNC
SCCPCHOffset ScopeType
SCR ScrambCode
SCRAMBLESW
Scramble Switch ADD SCTPLNK(Mandatory) ADD M3LNK(Mandatory) ADD CCP(Mandatory) ADD NCP(Mandatory)
RNC
SCTPLNKN
RNC
Start date SET TZ(Mandatory) RNC SD Enable SET MSP(Optional) RNC SDSF Priority SET MSP(Optional) RNC Seed of the pseudo-random sequence generator ADD IPDL(Mandatory) RNC Detect type STR NODEBDETECT(Optional) RNC Sequence of user release ADD CELLOLC(Optional) RNC FTP Server IP Address ADD FTPSCLTDPORT(Mandatory) RNC Server name ADD PPPLNK(Mandatory) RNC ADD CELLMBMSSCCPCH(Ma ndatory) SET MBMSSCCPCH(Mandator y) ADD CELLMBMSFACH(Manda tory) SET MBMSFACH(Mandatory) SET MTCH(Mandatory) RNC
ServiceBitRate
Service differential drd switch RNC Service ID SET MBMSPERF(Mandatory) RNC CN domain indication ADD NRNC(Mandatory) RNC ADD CELLMBMSSCCPCH(Ma ndatory) SET MBMSSCCPCH(Mandator y) ADD CELLMBMSFACH(Manda tory) SET MBMSFACH(Mandatory) SET MTCH(Mandatory) RNC ADD ADJNODE(Mandatory) RNC
ServiceType SGSNFLG
SharingOutCAPSMidLoad Sharing out capability middleSET CTRLPLNSHAREPARA(Optional) load RNC SharingType Sharing Type Of NodeB ADD NODEB(Mandatory) RNC SHCSRat HCS inter-rat reselection threshold CELLHCS(Optional) RNC ADD
SHInd
ShoFailNumForDwnGrd ShoFailPeriod
Threshold number of SHO failure INTRAFREQHO(Optional) SET RNC Max evaluation period of SHO failure SET INTRAFREQHO(Optional) RNC
SHOQualmin
RNC
SHOTRIG
ADD NRNC(Mandatory)
RNC
SIB11Ind
SIB11 Indicator
RNC
SIB12Ind SibCfgBitMap
SigChType
channel type for RRC establishment SET RRCESTCAUSE(Optional) RNC ADD MTP3LKS(Mandatory) ADD MTP3LNK(Mandatory) ADD MTP3RT(Mandatory) ADD M3RT(Mandatory) ADD M3LKS(Mandatory) ADD M3LNK(Mandatory) RNC Signalling linkset index Signalling link ID ADD M3LNK(Mandatory) RNC Bearing signal indication ADD FACH(Optional) RNC Signalling link code ADD MTP3LNK(Mandatory) RNC
SilverMaxMode
RNC
Max Mode Of Narrowband AMRC For Silver Users RNC Downlink maximum bit rate of Signal SET USERMBR(Optional) RNC Uplink maximum bit rate of Signal SET USERMBR(Optional) RNC Source IP address PING IP(Mandatory) RNC IMS SRB service downlink factor TRMFACTOR(Optional) ADD RNC
SIPPRIPATH SIPPRITH
IMS SRB primary path ADD TRMMAP(Optional) RNC IMS Signal pri path load threshold LOADEQ(Optional) RNC ADD
IMS SRB secondary path ADD TRMMAP(Optional) RNC IMS Signal pri sec path load ratio threshold ADD LOADEQ(Optional) RNC IMS SRB service uplink factor ADD TRMFACTOR(Optional) RNC HCS search inter-rat limit threshold ADD CELLHCS(Optional) RNC Slot format ADD SCCPCHBASIC(Mandatory) RNC Slot format 1 ADD PRACHSLOTFORMAT(Optional) RNC Slot format 2 ADD PRACHSLOTFORMAT(Optional) RNC Slot format 3 ADD PRACHSLOTFORMAT(Optional) RNC
SN SN SN SN SN SN SN SN SN
SN SN SN
SN
Slot format 4 ADD PRACHSLOTFORMAT(Optional) RNC Number of PRACH slot formats PRACHSLOTFORMAT(Mandatory) ADD RNC Signalling route mask ADD N7DPC(Optional) RNC StartType SET TZ(Mandatory) RNC UE Positioning Method SET SMLC(Optional) RNC Enable Smoke Alarm Reporting EMU(Optional) ADD RNC Start month SET TZ(Mandatory) RNC ADD CBSADDR(Mandatory) SET NCELLDETECTSWITCH( Mandatory) ADD IURCOMMSCCP(Mandato ry) ADD NODEB(Mandatory) RNC Slot No. Slot No. SET MRSCOPECTRL(Mandatory) RNC Slot No. ACT CRC(Optional) RNC Slot No. ADD RNCCBCPUID(Mandatory) RNC Slot No. SWP BRD(Mandatory) RNC Slot No. LOP VCL(Mandatory) RNC Slot No. LOD PATCH(Optional) RNC Slot No. SET OPTLOP(Mandatory) RNC Slot No. PING IP(Mandatory) RNC ADD BRD(Optional) CLR BRD(Mandatory) STR CPUUSAGETST(Mandator y) ULD RSTINFO(Mandatory) Slot No. RNC Slot No. SET QUEUEMAP(Mandatory) RNC Slot No. SET E1T1(Mandatory) RNC ACT MSP(Mandatory) SET MSPCMD(Mandatory) CLR MSPREP(Mandatory) SWP ETHPORT(Mandatory) SET MSP(Mandatory) ADD ETHREDPORT(Mandatory ) Slot No. RNC
SN
Slot No.
INH BRD(Optional)
RNC
SN
Slot No.
UIN BRD(Optional)
RNC
SN
Slot No.
SET COPTLNK(Mandatory)RNC
SN SN SN SN SN SN SN SN SN
Slot No. Slot No. Slot No. Slot No. Slot No. Slot No. Control slot No. Slot No. Slot No.
ADD PPPLNK(Mandatory) STR IMATST(Mandatory) SET E1T1LOP(Mandatory) LOP E1T1(Mandatory) STR E1T1TST(Mandatory) TRC IPADDR(Mandatory) SET CLK(Mandatory) ADD FRALNK(Mandatory) ADD TSCROSS(Mandatory) ADD IMAGRP(Mandatory) ADD UNILNK(Mandatory) ADD IMALNK(Mandatory) ADD DEVIP(Mandatory) ADD IPRT(Mandatory) SET OPT(Mandatory) ACT ETHPORT(Mandatory) SET ETHPORT(Mandatory) ADD MPGRP(Mandatory) ADD MPLNK(Mandatory) ADD ETHIP(Mandatory) ADD VLANID(Mandatory) ADD RNC IPPATHBIND(Mandatory) ACT FAN(Mandatory) RNC ACT VCLCC(Mandatory) RNC ADD SAALLNK(Mandatory) RNC ADD ADJNODE(Mandatory) RNC ADD SCTPLNK(Mandatory) RNC ADD M3LNK(Mandatory) RNC SET PHBMAP(Mandatory) RNC ADD MTP3LNK(Mandatory) RNC ADD LASNAMAP(Mandatory) ADD IMSISNAMAP(Mandatory)
SNAC
RNC
SnaExistInd
SndLdInfo2GsmInd
SpdEstSwitch
Algorithm Switch for UE speed estimation ADD CELLHCSHO(Optional) RNC ADD N7DPC(Optional) ADD OPC(Optional) SPDF Signal point data format RNC SPEED FE port speed SET ETHPORT(Optional) RNC SpeedDependentScalingFactor Speed dependent scaling factor for CELLSELRESEL(Optional) ADD reselection delay RNC ADD SPG(Mandatory) ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Man datory) SpgId Service priority group Identity RNC SET SPIFACTOR(Mandatory) SET SCHEDULEPRIOMAP(M SPI Scheduling Priority Indicatorandatory) RNC SPORTNO Src Port NO. STR IPLOPTST(Mandatory)RNC
SpucHeavy
SpucHyst
SpucLight SPUShareThd
Load level division threshold ADD CELLPUC(Optional) RNC 2 SPU traffic share threshold SET SPUSHARETHD(Optional) RNC
SrbChlType
SRB channel type RRC effect flagFRCCHLTYPEPARA(Optional) SET RNC SRB service downlink factor ADD TRMFACTOR(Optional) RNC SRB MAC-c flow GBR ADD CELLEFACH(Optional) RNC SRB MAC-c flow MBR ADD CELLEFACH(Optional) RNC
SRBPRIPATH SRBPRITH
SRB primary path ADD TRMMAP(Optional) RNC Signal pri path load thresholdADD LOADEQ(Optional) RNC
SRB secondary path ADD TRMMAP(Optional) RNC Signal pri sec path load ratio ADD LOADEQ(Optional) RNC threshold SRB service uplink factor ADD TRMFACTOR(Optional) RNC Source link No. ADD TSCROSS(Mandatory)RNC Clock source priority ADD CLKSRC(Mandatory) RNC Currently system clock priority CLKMODE(Mandatory) SET RNC
SRCIP
Source IP
RNC
SRN
Subrack No.
SRN SRN
RNC ADD CLKSRC(Mandatory) RNC ADD TSCROSS(Mandatory)RNC ADD SAALLNK(Optional) RNC ADD CBSADDR(Mandatory) SET NCELLDETECTSWITCH( Mandatory) ADD IURCOMMSCCP(Mandato ry) ADD NODEB(Mandatory) RNC FMT DATA(Optional) SET OFFLINE(Optional) SET ONLINE(Optional) ACT CRC(Optional) SET MRSCOPECTRL(Mandato ry) RNC ADD SUBRACK(Mandatory) RNC
SRN SRN SRN SRN SRN SRN SRN SRN SRN SRN SRName SrncBeDlRlcQosSwitch SrnsRabCnDomainType
ADD BRD(Mandatory) SWP BRD(Mandatory) CLR BRD(Mandatory) SET MSPCMD(Mandatory) CLR MSPREP(Mandatory) ULD LOGTOBAM(Mandatory) STR CPUUSAGETST(Mandator y) STR IMATST(Mandatory) SET E1T1LOP(Mandatory) LOP E1T1(Mandatory) STR E1T1TST(Mandatory) LOD PATCH(Optional) SET OPTLOP(Mandatory) ULD RSTINFO(Mandatory) PING IP(Mandatory) SWP ETHPORT(Mandatory) SET QUEUEMAP(Mandatory) SET E1T1(Mandatory) SET MSP(Mandatory) ACT MSP(Mandatory) ADD FRALNK(Mandatory) ADD TSCROSS(Mandatory) Subrack No. RNC ADD Subrack No. SET CLK(Mandatory) RNC Subrack No. ADD EMU(Mandatory) RNC Subrack No. ADD SAALLNK(Mandatory) RNC Subrack No. ADD ADJNODE(Mandatory) RNC Subrack No. ADD SCTPLNK(Mandatory) RNC Subrack No. ADD RSCGRP(Mandatory) RNC Control subrack No. ADD M3LNK(Mandatory) RNC Subrack No. SET PHBMAP(Mandatory) RNC Subrack No. ADD MTP3LNK(Mandatory) RNC Subrack name ADD SUBRACK(Mandatory) RNC Srnc Parameter for BE Downlink RLC QOS SET QOSACT(Optional) RNC SRNS relocation-allowed traffic type SET SRNSR(Optional) RNC
SRNSRDelayOffset Estimated non-measurement delaySRNSR(Optional) SET offset SRNSRExpiryTime SRNS relocation expiry time SET SRNSR(Optional) SRNSRIurReselectTimerLenSRNSR Iur reselection timer SET SRNSR(Optional) SrnsrSeparateDuration Duration of triggering static relocation SET SRNSR(Optional)
SrnsrSwitch SRNSR algorithm switch SET CORRMALGOSWITCH(Optional) RNC SRNSRTrigTimer Relocation trigger timer afterSET SRNSR(Optional) IurCCH RNC SRNTI SRNTI RST IUR(Mandatory) RNC SRT Subrack type SET CLK(Mandatory) RNC SSCHPower SSCH transmit power ADD SSCH(Optional) RNC SSCPUAVEUSAGEALMTHD occupancy alarm clearance threshold CPU SET CPUTHD(Optional) RNC SSCPUMAXUSAGEALMTHD occupancy alarm threshold CPUTHD(Optional) RNC CPU SET
Ssd
Source description
RNC
SSDSPMAXUSAGEALMTHD occupancy alarm threshold CPUTHD(Optional) RNC DSP SET SsearchHCS HCS cell reselection threshold ADD CELLHCS(Optional) RNC SsearchRat Inter-RAT cell reselection threshold ADD CELLSELRESEL(Optional) RNC ACT CRC(Optional) CMP TBLDATA(Mandatory) SSN Subsystem No. RNC ADD RNCCBCPUID(Mandatory ) SET MRSCOPECTRL(Mandato ry) ADD NODEB(Optional) STR CPUUSAGETST(Mandator y) ULD SSN Subsystem No. RNC RSTINFO(Mandatory) ST StartTime SET TZ(Mandatory) RNC
ST Service type ADD ATMTRF(Mandatory) RNC StaBlkNum5A Statistic Block Number For 5A Event ADD TYPRABQUALITYMEAS(Mandatory) RNC StartFlag GPS Frame Timing Active Flag CELLGPSFRMTIMING(Optional) ADD RNC StartTime1 First Cell Dynamic ShutDown Interval Start Time ADD CELLDYNSHUTDOWN(Mandatory) RNC StartTime2 Second Cell Dynamic ShutDown Interval Start Time ADD CELLDYNSHUTDOWN(Mandatory) RNC StartTime3 Third Cell Dynamic ShutDown Interval Start Time ADD CELLDYNSHUTDOWN(Mandatory) RNC StateIndTmr CN protection timer SET IUTIMERANDNUM(Optional) RNC StateIndTMR Sccp state ind protection timer ADD NRNC(Optional) RNC STATLEN MaxSTAT ADD SAALLNK(Optional) RNC STP STP function switch ADD N7DPC(Optional) RNC STPMODE Stop mode STR CPUUSAGETST(Mandatory) RNC StreamDlMBR Downlink maximum bit rate of Streaming SET USERMBR(Optional) RNC STREAMGBR Streaming MAC-c flow GBRADD CELLEFACH(Optional) RNC StreamHsupa2msTtiRateThs Rate threshold of Streaming on 2ms TTI of HSUPA SET FRC(Optional) RNC STREAMMBR Streaming MAC-c flow MBR ADD CELLEFACH(Optional) RNC StreamUlMBR Uplink maximum bit rate of Streaming SET USERMBR(Optional) RNC ADD SCCPCHBASIC(Optional) ADD AICH(Optional) ADD PICH(Optional) ADD CELLMBMSSCCPCH(Opt ional) SET MBMSSCCPCH(Optional) RNC STTDInd STTD indicator
ADD CELLSETUP(Optional) ADD NRNCCELL(Optional) STTDSupInd STTD support indicator RNC ADD TYPRABOLPC(Mandatory ) ADD TYPRABRLC(Mandatory) RNC Service subflow index Max subframe length ADD IPPATH(Optional) RNC Subnet No. SET SUBNET(Mandatory) RNC CBS support ADD QUICKCELLSETUP(Optional) RNC Support downlink DPCH SF 512 NODEBLMTPARA(Optional) ADD RNC Support DPC mode Change ind NRNCCELL(Optional)RNC ADD
Support DPC mode TRIPLET ADD NODEBLMTPARA(Optional) RNC IUR CCH support flag ADD NRNC(Optional) RNC Is support back clock source SET CLK(Optional) RNC
SupportCRType SuppPSHOFlag SuppPsRtServOnHsdpa SuppRIMFlag SW SWEEK Switch SWITCH Switch3GPP25415CR0125 SWITCHBACKFLAG SWITCHBACKHBNUM SwitchParameter1 SwitchParameter10 SwitchParameter2 SwitchParameter3 SwitchParameter4 SwitchParameter5 SwitchParameter6 SwitchParameter7 SwitchParameter8 SwitchParameter9 SWSEQ SysAmrRrcNum SYSCONTACT
CR support type ADD CNNODE(Optional) RNC Inter-RAT cell support PS HO indicator ADD GSMCELL(Optional) RNC Support PS realtime traffic on HSDPA ADD NODEBLMTPARA(Optional) RNC Inter-RAT cell support RIM indicator ADD GSMCELL(Optional) RNC Switch SET ALMPORT(Optional) RNC Start week SET TZ(Mandatory) RNC Port switch SET SCUPORT(Mandatory) RNC Bfd Protocol Switch SET BFDPROTOSW(Mandatory) RNC Switch3GPP25415CR0125 ADD CNNODE(Optional) RNC Switch primary IP address flag ADD SCTPLNK(Optional) RNC Switch back HB number ADD SCTPLNK(Optional) RNC SwitchParameter1 SET SS7PATCHSWITCH(Optional) RNC SwitchParameter10 SET SS7PATCHSWITCH(Optional) RNC SwitchParameter2 SET SS7PATCHSWITCH(Optional) RNC SwitchParameter3 SET SS7PATCHSWITCH(Optional) RNC SwitchParameter4 SET SS7PATCHSWITCH(Optional) RNC SwitchParameter5 SET SS7PATCHSWITCH(Optional) RNC SwitchParameter6 SET SS7PATCHSWITCH(Optional) RNC SwitchParameter7 SET SS7PATCHSWITCH(Optional) RNC SwitchParameter8 SET SS7PATCHSWITCH(Optional) RNC SwitchParameter9 SET SS7PATCHSWITCH(Optional) RNC Start week sequence SET TZ(Mandatory) RNC AMR_RRC Number per Second for System SET CALLSHOCKCTRL(Optional) RNC Contact mode of the manufacturerSYS(Optional) SET RNC
SYSDESC SysHighPriRrcNum SysHoPsResumeTmr SYSLOCATION SYSOBJECTID SysRrcRejNum SYSSERVICES SysTotalRrcNumThd T10TMR T12TMR T13TMR T14TMR T17TMR T1TMR T22TMR T23TMR T2TMR T300 T302 T304 T305 T307 T308 T309
T312 T313
System description SET SYS(Optional) RNC HiPri_RRC Number per Second for System SET CALLSHOCKCTRL(Optional) RNC PS resume timer after SYSHO STATETIMER(Optional) SET RNC System Location SET SYS(Optional) RNC System ID SET SYS(Optional) RNC Max RRC_REJ Number per Second for System SET CALLSHOCKCTRL(Optional) RNC System services SET SYS(Optional) RNC System Call Shock Trigger Threshold SET CALLSHOCKCTRL(Optional) RNC Signalling route set test timerSET MTP3TMR(Optional) RNC Uninhibit ACK timer SET MTP3TMR(Optional) RNC Force uninhibit timer SET MTP3TMR(Optional) RNC Inhibition ACK timer SET MTP3TMR(Optional) RNC Link realignment timer SET MTP3TMR(Optional) RNC Time-control changeover timer MTP3TMR(Optional) RNC SET Local inhibit test timer SET MTP3TMR(Optional) RNC Remote inhibit test timer SET MTP3TMR(Optional) RNC Changeover ACK timer SET MTP3TMR(Optional) RNC Timer 300 SET IDLEMODETIMER(Optional) RNC Timer 302 SET CONNMODETIMER(Optional) RNC Timer 304 SET CONNMODETIMER(Optional) RNC Timer 305 SET CONNMODETIMER(Optional) RNC Timer 307 SET CONNMODETIMER(Optional) RNC Timer 308 SET CONNMODETIMER(Optional) RNC Timer 309 SET CONNMODETIMER(Optional) RNC SET CONNMODETIMER(Opti onal) SET IDLEMODETIMER(Optio nal) Timer 312 RNC Timer 313 SET CONNMODETIMER(Optional) RNC
T314
Timer 314
Timer 315 SET CONNMODETIMER(Optional) RNC Timer 316 SET CONNMODETIMER(Optional) RNC Periodical location update timer CNDOMAIN(Optional) ADD RNC Timer 381 SET CONNMODETIMER(Optional) RNC Time-control changeback timer MTP3TMR(Optional) RNC SET Changeover ACK first attempt timer SET MTP3TMR(Optional) RNC Changeover ACK second attempt timer SET MTP3TMR(Optional) RNC Transmission prohibited inhibitionMTP3TMR(Optional) RNC SET timer Target RLC Retransmission rate RACHMEASUREPARA(Optional) SET RNC
TargetFreqCsThdEcN0
RNC
TargetFreqCsThdRscp
RNC
TargetFreqHThdEcN0
RNC
TargetFreqHThdRscp
RNC
RNC
RNC
TargetRatCsThd
RNC
TargetRatHThd
RNC
TargetRatR99PsThd
RNC
TB TbIndexNum
Output Segment No. EXP DEVFILE(Optional) RNC Configured TBS Count for HS-SCCH Less Mode SET HSSCCHLESSOPPARA(Optional) RNC ADD FACHDYNTFS(Optional) ADD PCHDYNTFS(Optional) ADD RACHDYNTFS(Optional)
TbNumber1
TB number of TF1
TbNumber2 TbNumber3
RNC ADD FACHDYNTFS(Optional) ADD PCHDYNTFS(Optional) ADD RACHDYNTFS(Optional) RNC ADD FACHDYNTFS(Optional) RNC
TbSizeIndex1
TB Size Index 1
TbSizeIndex2
TB Size Index 2
TbSizeIndex3
TB Size Index 3
TbSizeIndex4 TC
SET HSSCCHLESSOPPARA(Optional) RNC ADD MTP3LNK(Optional) RNC ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Man datory) Time offset RNC Target cell ID HO CELL(Optional) RNC Test code length ADD MTP3LNK(Optional) RNC Time for evaluating max cell ADD CELLHCS(Optional) RNC reselection Time before revert to low-mobility CELLHCS(Optional) RNC ADD meas Non-HCS TCR max hysteresis ADD CELLSELRESEL(Optional) RNC Non-HCS max TCR ADD CELLSELRESEL(Optional) RNC
Period of UE slow speed decision Enable Temperature Alarm Reporting ADD EMU(Optional) Upper Limit of Temperature AlarmEMU(Optional) ADD Lower Limit of Temperature ADD EMU(Optional) Alarm
ADD INTRAFREQNCELL(Opti onal) ADD INTERFREQNCELL(Optio nal) ADD GSMNCELL(Optional) TempOffset1 HCS Cell Reselect TempOffset1 RNC
ADD INTRAFREQNCELL(Opti onal) ADD INTERFREQNCELL(Optio nal) TempOffset2 HCS Cell Reselect TempOffset2 ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional AMR Event E Reporting Period In 10ms )ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional BE Event E Reporting Period In 10ms )ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional BE Event F Reporting Period In 10ms ) RNC
TenMsecForAmrE
RNC
TenMsecForBeE
RNC
TenMsecForBeF
RNC
TenMsecForDlBasicMeas
DL basic meas rprt cycle SET LDM(Mandatory) SET SATLDM(Mandatory) SET LDM(Mandatory) SET SATLDM(Mandatory)
RNC
TenMsecForDlOlcMeas
RNC
TenMsecForHsdpaPrvidRateMeas bit rate meas cycle HSDPA SET LDM(Mandatory) SET SATLDM(Mandatory) TenMsecForHsdpaPwrMeas HSDPA need pwr meas cycle TenMsecForHsupaPrvidRateMeas bit rate meas cycle SET LDM(Mandatory) HSUPA
RNC
RNC RNC
TenMsecForUlBasicMeas
TenMsecForUlOlcMeas
TenMsecForVpE
RNC SET LDM(Mandatory) SET SATLDM(Mandatory) UL OLC meas rprt cycle RNC ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional VP Event E Reporting Period In 10ms RNC )
TFastSpdEst
RNC
TFCIpresence
TFsNumber TG Thd5A ThdEa ThdEb THP THP10Class THP11Class THP12Class THP13Class THP14Class THP15Class THP1Class THP2Class THP3Class THP4Class THP5Class THP6Class THP7Class THP8Class THP9Class THPClass TIMEOUT TIMEOUT Timer TIMERCU TIMES
ADD SCCPCHBASIC(Mandatory) RNC ADD FACHDYNTFS(Mandatory ) ADD PCHDYNTFS(Mandatory) ADD RACHDYNTFS(Mandator y) Number of TFs RNC Target BAM SWP BAMAREA(Mandatory) RNC Event 5A Threshold ADD TYPRABQUALITYMEAS(Mandatory) RNC Event Ea Relative Threshold ADD TYPRABQUALITYMEAS(Mandatory) RNC Event Eb Relative Threshold ADD TYPRABQUALITYMEAS(Mandatory) RNC Traffic Handling Priority SET SCHEDULEPRIOMAP(Mandatory) RNC User Class of Traffic Handler Priority 10 SET IAVUSERTHPCLASS(Optional) RNC User Class of Traffic Handler Priority 11 SET IAVUSERTHPCLASS(Optional) RNC User Class of Traffic Handler Priority 12 SET IAVUSERTHPCLASS(Optional) RNC User Class of Traffic Handler Priority 13 SET IAVUSERTHPCLASS(Optional) RNC User Class of Traffic Handler Priority 14 SET IAVUSERTHPCLASS(Optional) RNC User Class of Traffic Handler Priority 15 SET IAVUSERTHPCLASS(Optional) RNC User Class of Traffic Handler Priority 1 SET IAVUSERTHPCLASS(Optional) RNC User Class of Traffic Handler Priority 2 SET IAVUSERTHPCLASS(Optional) RNC User Class of Traffic Handler Priority 3 SET IAVUSERTHPCLASS(Optional) RNC User Class of Traffic Handler Priority 4 SET IAVUSERTHPCLASS(Optional) RNC User Class of Traffic Handler Priority 5 SET IAVUSERTHPCLASS(Optional) RNC User Class of Traffic Handler Priority 6 SET IAVUSERTHPCLASS(Optional) RNC User Class of Traffic Handler Priority 7 SET IAVUSERTHPCLASS(Optional) RNC User Class of Traffic Handler Priority 8 SET IAVUSERTHPCLASS(Optional) RNC User Class of Traffic Handler Priority 9 SET IAVUSERTHPCLASS(Optional) RNC Traffic Handler Priority Class SET USERGBR(Mandatory)RNC Reply Time-Out PING IP(Optional) RNC PING MAC(Optional) TRC MAC(Optional) Time Out RNC Block time BLK CELL(Mandatory) RNC Timer_CU timer ADD AAL2PATH(Optional)RNC Number of ping packets PING IP(Optional) RNC
TimeToInterfreqHO TimeToMoniter
Inter-freq coverage handover delay trig time RNC Time to start re-TX monitor ADD TYPRABRLC(Optional) RNC
TimeToTrig2B
RNC
TimeToTrig2D
RNC
TimeToTrig2F
RNC
TimeToTrigForNonVerify
RNC
RNC
Time to trigger for verified GSM cell RNC Time to trigger 4A ADD TYPRABDCCCMC(Optional) RNC Time to trigger 4B ADD TYPRABDCCCMC(Optional) RNC
Event A time to trigger ADD TYPRABRLC(Optional) RNC Event B time to trigger ADD TYPRABRLC(Optional) RNC TRMMAP ID ADD TRMMAP(Mandatory)RNC Bronze user TRMMAP index ADD ADJMAP(Mandatory) RNC Gold user TRMMAP index ADD ADJMAP(Mandatory) RNC Silver user TRMMAP index ADD ADJMAP(Mandatory) RNC Signalling link test ACK timer MTP3TMR(Optional) RNC SET Signalling link repeat test timer MTP3TMR(Optional) RNC SET
ToAWE
IUB trans bearer type ADD NODEB(Optional) IUR transmission bearer typeADD NRNC(Mandatory) Iu transfers bearer type ADD CNNODE(Optional) AdjustMethod SET TZ(Mandatory) ADD FACH(Mandatory) ADD PCH(Optional) ADD CELLMBMSFACH(Option al) SET MBMSFACH(Optional) Time of arrival window endpoint
ToAWS TotalUserNumThd
RNC ADD FACH(Mandatory) ADD PCH(Optional) ADD CELLMBMSFACH(Option al) SET MBMSFACH(Optional) Time of arrival window startpoint RNC Cell Dynamic ShutDown Total User number Threshold RNC ADD CELLDYNSHUTDOWN(Optional)
TP
Log type
TpenaltyHcsReselect TrafficClass
COL FAMLOG(Mandatory) RNC ADD INTRAFREQNCELL(Opti onal) ADD INTERFREQNCELL(Optio nal) ADD GSMNCELL(Optional) HCS Cell Reselect Penalty Timer RNC Traffic Class ADD TYPRABBASIC(Mandatory) RNC SET SCHEDULEPRIOMAP(M andatory) SET USERGBR(Mandatory) SET FACHBANDWIDTH(Man datory) SET USERHAPPYBR(Mandato ry) SET DTXDRXPARA(Mandator y) SET HSSCCHLESSOPPARA( Mandatory) RNC SET REDIRECTION(Mandator y) ADD CELLREDIRECTION(Man datory) RNC
TrafficClass
Traffic Class
TrafficType
Traffic Type
TRAMODE
Traffic mode
ADD M3LKS(Optional)
RNC
Transfer Common Channel User number ADD CELLOLC(Optional) RNC IUB Trans Delay ADD NODEB(Optional) RNC Transport Type ADD IPPATH(Optional) RNC
TRANST
Transport Type
RNC
FACH ID Transport channel type Transport channel type Transport channel type
ADD FACH(Mandatory) ADD FACHLOCH(Mandatory) ADD RACH(Optional) ADD PCHDYNTFS(Optional) ADD FACHDYNTFS(Mandatory ) ADD PCH(Optional) ADD RACHDYNTFS(Optional) ADD BCH(Optional) RNC ADD TYPRABHSPA(Mandatory) RNC ADD TYPRABOLPC(Mandatory) RNC ADD TYPRABRLC(Mandatory) RNC
TRelateLength
RNC
Reselection delay time ADD CELLSELRESEL(Optional) RNC Reselection delay time for UE in CELL_FACH state ADD CELLSELRESEL(Optional) RNC Reselection delay time for UE in PCH state ADD CELLSELRESEL(Optional) RNC Traffic record index ADD ATMTRF(Mandatory) RNC
TrigTime1A
RNC
TrigTime1B
RNC
TrigTime1C
RNC
TrigTime1D
RNC
TrigTime1F
RNC
TrigTime1J
RNC
TrigTime2C
RNC
TrigTime2D
RNC
TrigTime2F
RNC
TrigTime3A
RNC
3C event trigger delay time 6F event trigger delay time 6G event trigger delay time Trunk Link No. Trunk Link Slot No.
RNC SET HOCOMM(Optional) RNC SET HOCOMM(Optional) RNC ADD ETHTRKLNK(Mandatory) RNC ADD ETHTRKLNK(Mandatory) RNC ADD ETHTRK(Mandatory) ADD ETHTRKIP(Mandatory) ADD ETHTRKLNK(Mandatory) RNC Trunk No. Radio link failure timer length ADD CELLSETUP(Optional) RNC RNC ID of Target Cell HO CELL(Optional) RNC TRUNK Dhcp Server IP ADD NODEBESN(Mandatory) RNC NodeB Interface IP Address ADD NODEBESN(Mandatory) RNC NodeB Interface IP Mask ADD NODEBESN(Mandatory) RNC The Trunk group No. ADD IPLOGICPORT(Mandatory) RNC time slot No. LOP E1T1(Mandatory) RNC 16TimeSlot switch SET E1T1(Optional) RNC
Time window for UE slow speed decision RNC MGWTST USER IMSI SET MGWTST(Mandatory) RNC Test Len STR IPLOPTST(Optional) RNC MGWTST SWITCH SET MGWTST(Mandatory) RNC Duration time STR CPUUSAGETST(Mandatory) RNC PKT TTL TRC MAC(Optional) RNC Forward bandwidth ADD ATMLOGICPORT(Mandatory) RNC Forward bandwidth ADD IPPATH(Mandatory) RNC Forward Bandwidth ADD RSCGRP(Mandatory) RNC ADD CELLSETUP(Mandatory) ADD NRNCCELL(Mandatory) TX diversity indication RNC Interval of send PING IP(Optional) RNC Interval of Packet Send STR IPLOPTST(Optional) RNC
TXTRFX TYPE
UARFCNDownlink
Downlink UARFCN
RNC
UARFCNUplink
RNC ADD CELLSETUP(Optional) ADD NRNCCELL(Optional) UARFCNUplinkInd UL frequency ind RNC UBLREQTMR Unblocking request timer SET AAL2TMR(Optional) RNC UDPMUXLEN UDP MUX Max Length ADD IPPATH(Optional) RNC UDPMUXMODRECV Receive UDP MUX Mode ADD IPPATH(Optional) RNC UDPMUXMODSEND Sender UDP MUX Mode ADD IPPATH(Optional) RNC UDPMUXTIME UDP MUX Max Time ADD IPPATH(Optional) RNC UeAssAgpsAssDataSwitch UE-assisted A-GPS Data Send switch SET SMLC(Optional) RNC UeBasAgpsAssDataSwitch UE-based A-GPS Data Send SET SMLC(Optional) Switch RNC UeCapEnqRspTmr UE capability enquiry response timer SET STATETIMER(Optional) RNC UeCntCheckRspTmr UE counter check response timer STATETIMER(Optional) SET RNC UINT Uninhibit Type UIN BRD(Mandatory) RNC UINTTIME Unit time STR E1T1TST(Optional) RNC UL Upper Limit SET ALMPORT(Optional) RNC UlAmrConvAF UL AF of R99 AMR conv service ADMCTRL(Optional) RNC SET
Uplink UARFCN
UlAmrTrigTime6A1
UlAmrTrigTime6A2
UlAmrTrigTime6B1
UlAmrTrigTime6B2
UlAmrTrigTime6D UlBackgroundAF
ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional AMR Trigger Time 6A1 )ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional AMR Trigger Time 6A2 )ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional AMR Trigger Time 6B1 )ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional AMR Trigger Time 6B2 )ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional AMR Trigger Time 6D ) UL AF of R99 background serviceADMCTRL(Optional) SET
RNC
RNC
RNC
RNC
RNC RNC
RNC
SET FRCCHLTYPEPARA(Opti onal) ADD CELLFRC(Optional) UL BE traffic DCH decision threshold RNC UL BE traffic Initial bit rate SET FRC(Optional) RNC UL BE traffic threshold on HSUPA SET FRCCHLTYPEPARA(Optional) RNC
UlBeTrigTime6A1
UlBeTrigTime6A2
UlBeTrigTime6B1
UlBeTrigTime6B2
UlBeTrigTime6D UlCacAvgFilterLen
ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional BE Trigger Time 6A1 )ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional BE Trigger Time 6A2 )ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional BE Trigger Time 6B1 )ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional BE Trigger Time 6B2 )ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional BE Trigger Time 6D ) SET LDM(Optional) SET UL CAC smoothing filter length SATLDM(Optional)
RNC
RNC
RNC
RNC
RNC RNC
UlCCHLoadFactor
UlCellTotalThd
UlCmMethod
ADD CELLLDR(Optional) ADD NODEBLDR(Optional) UlCSInterRatShouldBeHOUeNum should be HO user number UL CS RNC ADD CELLLDR(Optional) ADD NODEBLDR(Optional) UlCSInterRatShouldNotHOUeNum should not be HO user number UL CS RNC
UlDcccRateThd UlFpMode
UlFullCvrRate
Uplink Bit Rate Threshold For DCCC SET DCCC(Optional) RNC UL FP Mode ADD TYPRABBASIC(Mandatory) RNC ADD CELLDCCC(Optional) SET Uplink Full Coverage Bit Rate DCCC(Optional) RNC
UlGBR
UlHoCeResvSf UL handover credit reserved ADD CELLCAC(Optional) SF UlHsDpcchRsvdFactor UL HS-DPCCH reserve factor ADD CELLCAC(Optional) UlIMSTransModeOnHsupa IMS signalling transmission modeFRC(Optional) SET on HSUPA UlInteractAF UL AF of R99 interactive service ADMCTRL(Optional) SET UlInterFreqHoBWThd UL HO maximum bandwidthADD CELLLDR(Optional) UlInterFreqHoCellLoadSpaceThd load space threshold ADD CELLLDR(Optional) UL HO UlLdrAMRRateReductionRabNum UL LDR-AMR rate reduction RABCELLLDR(Optional) ADD number SET LDM(Optional) SET UlLdrAvgFilterLen UL LDR smoothing filter length SATLDM(Optional)
ADD CELLLDR(Optional) ADD NODEBLDR(Optional) UlLdrBERateReductionRabNumLDR-BE rate reduction RAB number UL RNC ADD CELLLDR(Optional) ADD NODEBLDR(Optional) UL LDR credit SF reserved threshold RNC UL LDR eighth action ADD CELLLDR(Optional) RNC ADD CELLLDR(Optional) ADD NODEBLDR(Optional)
UlLdrCreditSfResThd UlLdrEighthAction
UlLdrFifthAction
RNC
UlLdrFirstAction
RNC
UlLdrFourthAction
RNC
ADD CELLLDR(Optional) ADD NODEBLDR(Optional) UlLdrPsRTQosRenegRabNum LDR un-ctrl RT Qos re-nego RAB num UL RNC
UlLdrRelThd
ADD CELLLDR(Optional) ADD NODEBLDR(Optional) UlLdrSecondAction UlLdrSeventhAction UL LDR second action UL LDR seventh action RNC ADD CELLLDR(Optional) RNC ADD CELLLDR(Optional) ADD NODEBLDR(Optional) ADD CELLLDR(Optional) ADD NODEBLDR(Optional)
UlLdrSixthAction
RNC
UlLdrThirdAction
RNC
UlLdrTrigThd UlMaxNumOfTfc
UlMeasFilterCoef UlMidRateCalc
UL LDR trigger threshold ADD CELLLDM(Optional) RNC Uplink Maximum Number ofADD NODEBLMTPARA(Optional) TFC RNC ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional UL Measurement Filter Coefficient RNC ) Uplink Mid Bit Rate Calculate Method SET DCCC(Optional) RNC
UlMidRateThd
RNC
SET AMRC(Optional) SET AMRCWB(Optional) UlModeChangeTimerLen UlNonAmrConvAF UL Mode Change Timer Length RNC UL AF of R99 non AMR conv service SET ADMCTRL(Optional) RNC
UlNonCtrlThdForAMR
UlNonCtrlThdForHo
UlNonCtrlThdForOther UlOlcAvgFilterLen
UL threshold of other services ADD CELLCAC(Optional) RNC SET LDM(Optional) SET UL OLC smoothing filter length SATLDM(Optional) RNC
UlOlcFTFRstrctRabNum
UlOlcFTFRstrctTimes UlOlcMeasFilterCoeff
UL OLC fast TF restrict times ADD CELLOLC(Optional) RNC SET LDM(Optional) SET UL overload measure filter coeff SATLDM(Optional) RNC
UlOlcRelThd
UlOlcTraffRelRabNum UlOlcTrigHyst
UL OLC traff release RAB numberCELLOLC(Optional) RNC ADD SET LDM(Optional) UL OLC trigger hysteresis SET SATLDM(Optional) RNC
UlOlcTrigThd
ADD CELLLDR(Optional) ADD NODEBLDR(Optional) UlPSInterRatShouldBeHOUeNum should be HO user number UL PS RNC ADD CELLLDR(Optional) ADD NODEBLDR(Optional) UlPSInterRatShouldNotHOUeNum should not be HO user number UL PS RNC
UlQosAmrAdjSwitch Adjustment Switch For AMRSET QOSACT(Optional) Uplink Rate UlQosAmrInterFreqHoSwitch InterFreq HO For Switch ForSET QOSACT(Optional) Uplink AMR UlQosAmrInterRatHoSwitchInterRat HO Switch For Uplink AMR SET QOSACT(Optional)
ULQosMcTimerLen Up Link Qos Measure timer length UlQosVpInterFreqHoSwitch InterFreq HO Switch For Uplink VP SET QOSACT(Optional) UlQosWAmrAdjSwitch Switch Of WAMR Uplink Rate Adjustment SET QOSACT(Optional) UlQosWAmrInterFreqHoSwitch InterFreq HO Switch For Uplink WAMR SET QOSACT(Optional) UlQosWAmrInterRatHoSwitch InterRat HO Switch For Uplink WAMR SET QOSACT(Optional) UlRateDnAdjLevel Uplink Rate Decrease AdjustSET DCCC(Optional) Level UlRateUpAdjLevel Uplink Rate Increase Adjust LevelDCCC(Optional) SET
UL SF threshold RNC UL AF of SRB SET ADMCTRL(Optional) RNC SRB transmission mode on HSUPA SET FRC(Optional) RNC UL AF of R99 Streaming service ADMCTRL(Optional) RNC SET UL streaming traffic threshold on HSUPA SET FRCCHLTYPEPARA(Optional) RNC Streaming traffic transmission mode on HSUPA SET FRC(Optional) RNC
UlThd6A1
UlThd6A2
UlVpTrigTime6A1
UlVpTrigTime6B1
UlVpTrigTime6D
Uplink Event 6B1 Relative Threshold ADD TYPRABQUALITYMEAS(Mandatory) RNC Uplink Event 6B2 Relative Threshold ADD TYPRABQUALITYMEAS(Mandatory) RNC UL total equivalent user number CELLCAC(Optional) RNC ADD UL closed loop power control stepFRC(Optional) SET size RNC ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional VP Trigger Time 6A1 RNC )ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional VP Trigger Time 6B1 RNC )ADD CELLQUALITYMEAS(Op tional) SET QUALITYMEAS(Optional VP Trigger Time 6D RNC )
UncertAltitude
UncertAltitudeImp
UncertSemiMajor
UncertSemiMajorImp
UncertSemiMinor
UncertSemiMinorImp UNILNKN UpLimitCountingTime UPPERANI UPPERGRPID UPPERVP URA1 URA2 URA3 URA4 URA5 URA6 URA7 URA8
URAId URANUM
Cell Center Uncertainty Semi-minor ADD SMLCCELL(Optional)RNC UNI link No. ADD UNILNK(Mandatory) RNC Up Limit Counting Time SET RNCMBMSPARA(Optional) RNC Upper Ani ADD ADJNODE(Mandatory) RNC Upper Class Transport Resource Group No. ADD RSCGRP(Mandatory) RNC The Upper Logical port Number ATMLOGICPORT(Optional) ADD RNC URA ID 1 ADD QUICKCELLSETUP(Mandatory) RNC URA ID 2 ADD QUICKCELLSETUP(Mandatory) RNC URA ID 3 ADD QUICKCELLSETUP(Mandatory) RNC URA ID 4 ADD QUICKCELLSETUP(Mandatory) RNC URA ID 5 ADD QUICKCELLSETUP(Mandatory) RNC URA ID 6 ADD QUICKCELLSETUP(Mandatory) RNC URA ID 7 ADD QUICKCELLSETUP(Mandatory) RNC URA ID 8 ADD QUICKCELLSETUP(Mandatory) RNC ADD URA(Mandatory) ADD CELLURA(Mandatory) ADD NRNCURA(Mandatory) URA ID RNC URA number ADD QUICKCELLSETUP(Mandatory) RNC
ADD CELLINTERFREQHOCO V(Optional) SET INTERFREQHOCOV(Opti onal) ADD CELLINTERRATHOCOV (Optional) SET INTERRATHOCOV(Optio nal)
UsedFreqCSThdEcN0
RNC
ADD CELLINTERFREQHOCO V(Optional) SET INTERFREQHOCOV(Opti onal) ADD CELLINTERRATHOCOV (Optional) SET INTERRATHOCOV(Optio nal)
UsedFreqCSThdRSCP
RNC
ADD CELLINTERFREQHOCO V(Optional) SET INTERFREQHOCOV(Opti onal) ADD CELLINTERRATHOCOV (Optional) SET INTERRATHOCOV(Optio nal)
UsedFreqHThdEcN0
RNC
ADD CELLINTERFREQHOCO V(Optional) SET INTERFREQHOCOV(Opti onal) ADD CELLINTERRATHOCOV (Optional) SET INTERRATHOCOV(Optio nal)
UsedFreqHThdRSCP
RNC
RNC
ADD CELLINTERFREQHOCO V(Optional) SET INTERFREQHOCOV(Opti onal) ADD CELLINTERRATHOCOV (Optional) SET INTERRATHOCOV(Optio nal)
UsedFreqR99PsThdEcN0
RNC
ADD CELLINTERFREQHOCO V(Optional) SET INTERFREQHOCOV(Opti onal) ADD CELLINTERRATHOCOV (Optional) SET INTERRATHOCOV(Optio nal)
UseOfHcs USEPPP
Inter-freq R99 PS Used frequency trigger RSCP THD RNC Use FE or not ADD NODEBESN(Mandatory) RNC Mac-ehs use flg SET HSSCCHLESSOPPARA(Mandatory) RNC Use MP or not ADD NODEBESN(Mandatory) RNC Use the second Serial Number or not ADD NODEBESN(Optional) RNC ADD CELLHCS(Optional) ADD GSMCELL(Optional) ADD NRNCCELL(Optional) Use of HCS RNC Use PPP or not ADD NODEBESN(Mandatory) RNC
UserPercentage ADD CELLMBDRINTERRAT(Optional) RNC Percentage of User Plane Sharing USERPLNSHAREPARA(Optional) SET Out Offset RNC Percentage of User Plane Sharing USERPLNSHAREPARA(Optional) SET Out threshold RNC SET SCHEDULEPRIOMAP(M andatory) SET USERGBR(Mandatory) SET FACHBANDWIDTH(Man datory) SET USERHAPPYBR(Mandato ry) RNC ADD NODEBESN(Mandatory) RNC ADD ATMTRF(Optional) RNC ADD AAL2PATH(Mandatory) RNC ACT VCLCC(Mandatory) RNC ADD SCTPLNK(Optional) ADD IPPATH(Optional)
User Priority Use TRUNK or not Rate unit Bearing VCI VCL act type
VLANFlAG
VLANID Flag
RNC
ADD VLANID(Mandatory) ADD IPPATH(Mandatory) ADD SCTPLNK(Mandatory) ADD ETHMA(Mandatory) VLANID VLAN ID RNC
VLANPRI VOICEDL
VLAN Priority SET DSCPMAP(Optional) RNC AMR voice service downlinkADD TRMFACTOR(Optional) factor RNC
VOICEPRIPATH VOICEPRITH
AMR voice primary path ADD TRMMAP(Optional) RNC AMR voice pri path load threshold LOADEQ(Optional) RNC ADD
AMR voice secondary path ADD TRMMAP(Optional) RNC AMR voice pri sec path load ADDthreshold ratio LOADEQ(Optional) RNC AMR voice service uplink factor TRMFACTOR(Optional) ADD RNC
VoipChlType VoipHsupaTti VOL24_MASK VOL24_THD_HIGH VOL24_THD_LOW VOL48_MASK VOL48_THD_HIGH VOL48_THD_LOW VPCLCXN VPI
VOIP channel type SET FRCCHLTYPEPARA(Optional) RNC HSUPA TTI type of VOIP traffic FRC(Optional) SET RNC Enable Alarm Reporting for 24V Power ADD EMU(Optional) RNC Upper Limit of Alarm for 24V Power ADD EMU(Optional) RNC Lower Limit of Alarm for 24V Power ADD EMU(Optional) RNC Enable Alarm Reporting for 48V Power ADD EMU(Optional) RNC Upper Limit of Alarm for 48V Power ADD EMU(Optional) RNC Lower Limit of Alarm for 48V Power ADD EMU(Optional) RNC Cross connect index ADD VPCLCX(Optional) RNC Bearing VPI ADD AAL2PATH(Mandatory) RNC ADD QUICKCELLSETUP(Optio nal) ADD CELLSETUP(Optional) ADD NRNCCELL(Optional) VPLimitInd Cell VP limit indicator RNC VPQosPerform QOS Switch For VP Traffic SET QOSACT(Optional) RNC VpRabAbnormRelRatioThd VP call drop ratio Per Spu SET KPIALMTHD(Optional) RNC VpRabEstAttMinNum The minimum of VP Rab attempt setup Per Spu SET KPIALMTHD(Optional) RNC VpRabEstSuccRatioThd VP Rab successful setup ratio Per KPIALMTHD(Optional) SET Spu RNC VpRabRelMinNum The number of VP drop Per Spu KPIALMTHD(Optional) SET RNC WAmrUlRateAdjTimerLen Wait Timer For WAMR Uplink QOSACT(Optional) RNC SET WATER_MASK Enable Water Alarm Reporting ADD EMU(Optional) RNC
Weight
Weighted factor
RNC
ADD CELLINTERFREQHOCO V(Optional) SET INTERFREQHOCOV(Opti onal) ADD CELLINTERRATHOCOV (Optional) SET INTERRATHOCOV(Optio nal)
WeightForUsedFreq WINDOWSIZE
WKMODE Work mode ADD M3LKS(Optional) RNC WORKAREA Work area flag FMT DATA(Optional) RNC WORKMODE Work Mode SET E1T1(Optional) RNC WTRT WTR Time SET MSP(Optional) RNC XOffset X Offset SET RNCMBMSPARA(Optional) RNC ZeroRateUpFailToRelTimerLen Release 0 kbit/s Timer lengthSETfailed to rate up for COIFTIMER(Optional) RNC ZONET TimeZone SET TZ(Optional) RNC
Meaning
Value Type
The type of service carried by the AAL2 path that users expect. HSPA, SHARE Enumeration Type R99, R99,HSPA,SHARE This parameter specifies the time to execute re-host policyhour, min, sec hosted NodeB, after the RNC recovers from disaster and starts to ope Compound Type for the primary 00:00:00~23:59:59 It defines the mapping of ACIntervalASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. 0~9 to Type 0~7 0~7 It defines the mapping of ACInterval TypeFor detailed information of this parameter, refer to 3GPP TS 22.011. 10 to ASCs. 0~7 0~7 It defines the mapping of ACInterval TypeFor detailed information of this parameter, refer to 3GPP TS 22.011. 11 to ASCs. 0~7 0~7 It defines the mapping of ACInterval TypeFor detailed information of this parameter, refer to 3GPP TS 22.011. 12 to ASCs. 0~7 0~7 It defines the mapping of ACInterval TypeFor detailed information of this parameter, refer to 3GPP TS 22.011. 13 to ASCs. 0~7 0~7 It defines the mapping of ACInterval TypeFor detailed information of this parameter, refer to 3GPP TS 22.011. 14 to ASCs. 0~7 0~7 It defines the mapping of ACInterval TypeFor detailed information of this parameter, refer to 3GPP TS 22.011. 15 to ASCs. 0~7 0~7 Identifying an ASC. Enumeration Type ASC0, ASC1, ASC2, ASC3, ASC0, ASC1, ASC2, ASC3, ASC4, ASC5, ASC6, ASC ASC4, ASC5, ASC6, ASC7
This parameter specifies whether to enableType Enumeration the address andDisable, fields compression switch. (not support the address and control field compr control Enable Disable Interval of automatic access classes restriction between cells. When a subsystem of an RNC performs access classes restriction on cells manage Interval Type 1~36000 10~360000, step:10 Specifies the interval between consecutive pollings imposed on the PS domain and CS domain in different cells according to the flexible polling Interval Type 1~36000 1~36000
Specifies the restricted access class according to the flexible polling restriction mode. AC0,AC1,AC2,AC3,AC4,AC5,AC6,AC7,AC8,AC9,AC Bit Field Type AC0(Access Class 0 Restriction), AC1(Access Class 1 Restriction), AC2(Access Cl Specifies the access classes that are restricted according toAC0(Access Class 0 mode. AC0,AC1,AC2,AC3,AC4,AC5,AC6,AC7,AC8,AC9,AC Bit Field Type the fixed restriction Restriction), AC1(Access Class 1 Restriction), AC2(Access Cl
Specifies the interval delay between consecutive pollings according to the flexible polling restriction mode. Interval Type 6~3600 6~3600 Access restriction ratio. When a cell performs access classes restriction, you can select some access classes from AC0 to AC9 based on the ratio Interval Type 1~10 0.1~1, step:0.1 OFF indicates that the AC algorithm is automatically disabled. ON indicates that the AC algorithm is automatically enabled. Enumeration Type OFF, ON OFF, ON This parameter specifies the license file to Type Enumeration be activated. "Local" indicates File), SHARE(Share is activated, and "SHARE" indicates that the shar LOCAL(Local the local license file Value) LOCAL,SHARE This parameter specifies the type of the GPS assistance data to be activated. Enumeration Type GPS(Global Position System), DGPS(Differential Global Position System), BOTH(bo GPS(Global Position System),DGPS(Differential Globa This parameter specifies the CPU usage to be increased. 1~95 Interval Type 1 to 95 The activity factor at the radio layer varies Type the serviceNOPRIORITY(NOPRIORITY), GOLD(GOLD),is performed based on the priorities o Enumeration with priority. The configuration of the activity factor SILVER(SILVER), COPPER(COP NOPRIORITY, GOLD, SILVER, COPPER Flag of A-GPS location activation. Enumeration Type INACTIVE, ACTIVE INACTIVE, ACTIVE This parameter indicates whether the GPS Type Enumeration Additional Assistance Data Request is sent when the A-GPS method is used. NODELIVERY, DELIVERY NODELIVERY, DELIVERY UE positioning mode when the A-GPS method is selected.UE_BASED, UE_ASSISTED, UE_BASED_PREFERRED, UE_BASED_PREFERR Enumeration Type The UE supports both UE-based A-GPS mode and UE-assisted A-GPS mode. UE_BASED, UE_ASSISTED, UE_ASSISTED_PREFE This parameter specifies a GPS reference receiver. Interval Type 0~65534 0 to 65534
This parameter specifies the type of the GPS reference receiver. A GPS reference receiver can be configured on the local RNC, a NodeB of the Enumeration Type RNC(Local RNC), NODEB(Local NodeB), NRNC_RNC(Nearby RNC), NRNC_RN RNC(Local RNC), NODEB(Local NodeB), NRNC_NO Difference between the transmit power of AICH and that of PCPICH. If the value is set -22~5 Interval Type -22~5 too small, the UEs on the cell edge cannot receive the ac Transmission timing information of an AICH. "0" indicates that there are 7680 chips offset between the access preamble of the PRACH and AIC Interval Type 0~1 0~1
This parameter specifies the alarm IDType alarm configuration record to be modified. 1~65535 Interval of the 1~65535 This parameter specifies whether the configured HS-SCCH Less Operation parameters adopt the octet_align or bit_align mode. Enumeration Type BIT_ALIGN(Bit aligned mode), OCTET_ALIGN(Octet aligned mode) BIT_ALIGN, OCTET_ALIGN The unit is kbps. This parameter is valid only when Transport Resource Group Type is IP and Bandwidth mode is HALF_DUPLEX. Interval Type 0~4000000 0~4000000 If Manual is chosen, allocating [Code Number for HS-PDSCH] the equal of configured Manual, Automatic Enumeration Type Manual(Manual), Automatic(Automatic) code number. If Automatic is chosen, alloc HS-PDSCH This parameter specifies the antenna altitude of the GPS reference receiver. Interval Type -1000~10000 -1000 to 10000 This parameter specifies the antenna altitude of the GPS reference receiver. (IMP unit: Feet) Interval Type -3281~32810 -3281~32810 This parameter specifies the alarm severityType set. Enumeration to be Critical(Critical), Major(Major), Minor(Minor), Warning(Warning) Critical,Major,Minor,Warning
Maximum number of times for event 2B retry. This parameter defines the number of times for event 2B retry when the measurement control is valid. The larger the value of this parameter, the larger the number of times for inter-frequency handover retry, and the higher probability for the UE to be successfully handed over to the target cell whose load is restored. After the maximum number of times for event 2B retry, the RNC sends the inter-frequency measurement control message again to hand over the UEs to the other cells of this frequency. If the measurement control message is released, the retry will be immediately stopped.
Interval Type
0~63
Maximum retry times of the event 2C. This parameter defines the number of times for event 2C retry when the measurement control is valid. The larger the value of this parameter, the larger the number of times for interfrequency handover retry, and the higher probability for the UE to be successfully handed over to the target cell whose load is restored. When the retry times reaches the maximum value, the RNC stops the retry process. Or if the measurement control message is released, the retry will be immediately stopped. Interval Type
0~63
Maximum retry times of the event 3A. This parameter defines the number of times for event 3A retry when the measurement control is valid. The larger the value of this parameter, the larger the number of times for inter-RAT handover retry, and the higher probability the UE is successfully handed over to the target cell whose load is restored. When the retry times reaches the maximum value, the RNC stops the retry process. Or if the measurement control message is released, the retry will be immediately stopped. Interval Type
0~63
Maximum retry times of the event 3C. This parameter defines the number of times for event 3C retry when the measurement control is valid. The larger the value of this parameter, the larger the number of times for inter-RAT handover retry, and the higher probability the UE is successfully handed over to the target cell whose load is restored. When the retry times reaches the maximum value, the RNC stops the retry process. Or if the measurement control message is released, the retry will be immediately stopped. Interval Type 0~63 0~62, 63: Infinity This parameter specifies to edit sender parameters, receiver parameters, or flow control SENDER_PARA, RECEIVE_PARA, FLOWCONTRO Enumeration Type SENDER_PARA, RECEIVE_PARA, FLOWCONTROL_PARA parameters. When the parameter is set to YES, the QOS control algorithm is used for AMR services. When the parameter is set to NO, the QOS control algo Enumeration Type NO, YES NO, YES AMR CDR(Call Drop Ratio) Interval Type ratio is higher0~100 threshold in a checking period, need arise KPI alarm. Per Spu, if the than this 0~100 The minimum number of AMR service attempt Per Spu, the sum of AMR service attempt need to be higher than this threshold to arise KPI alarm Interval Type 0~65534 0~65534 Successful AMR service setup ratio Per Spu, if the ratio is 0~100 than this threshold in a0~100 Interval Type lower checking period, need arise KPI alarm. The Minimum number of AMR release Per Spu, the sum of AMR release need to be higher than this threshold to trigger arise KPI alarm which Interval Type 0~65534 0~65534
Timer for triggering a second adjustment of the UL AMR mode. This parameter specifies the duration of waiting for the voice quality enhanced acknowledgement after the UL AMR mode adjustment when the associated command is delivered. The UL AMRC rate adjust timer starts when AMRC mode adjustment procedure is triggered, and stops when the next measurement report is received. If no measurement report is received when the UL AMRC timer expires, you can infer that the measured value remains in the same state as that before the previous UL AMRC mode adjustment. The previous AMRC mode adjustment is not effective, and another adjustment is required. The longer the UL AMRC timer is, the less frequently the AMRC mode is adjusted. In addition, the response to measurement reports becomes slower Interval Type accordingly.
20~64000
20~64000
ID of the adjacent node. An RNC canType Interval be configured with at most 2000 adjacent nodes. 0~1999 0~1999 Altitude of the cell antenna in the WGS-84 coordinates. This is a necessary parameter, controlled by MTRLGY and valid when MET~0(metric s Interval Type -32767~32767 -32767~32767 Altitude of the cell antenna in the WGS-84 coordinates. This is controlled by MTRLGY-107502~107502IMP~1(British measurement).The value Interval Type -107502~107502 and valid when
Latitude of the cell antenna in the WGS-84 coordinates. The value corresponding to the latitude A degrees B minutes C seconds is [A + (B/60) + (C/3600)] / 0.000001. For example, the value corresponding to the latitude 31 degrees 30 minutes 36 seconds is [31 + (30/60) + (36/3600)] / 0.000001 = 31510000. This is controlled by GCDF and valid when DEG~0(degree format).The value of this parameter has effect on the location result. Interval Type This parameter specifies the latitude of the cell antenna in the WGS-84 coordinates. The input format is ddd:mm:ss.ssss. This is controlled by GCDF and valid when SEC~1(degree, minute, second format).The value of this parameter has effect on the location result. String Type -90000000~90000000 -90~90, step: 0.000001
-90~90
Longitude of the cell antenna in the WGS-84 coordinates. The value corresponding to the longitude A degrees B minutes C seconds is [A + (B/60) + (C/3600)] / 0.000001. For example, the value corresponding to the longitude 121 degrees 40 minutes 36 seconds is [121 + (40/60) + (36/3600)] / 0.000001 = 121676666. This is controlled by GCDF and valid when DEG~0(degree format).The value of this parameter has effect on the location result. Interval Type -180000000~180000000 -180~180, step: 0.000001 Longitude of the cell antennaString Type in the WGS-84 coordinates. The input format is ddd:mm:ss.ssss. This is controlled by GCDF and valid when SEC -180~180 Coverage angle of a sector. For an omni-directional cell, the value is 360.The value of this parameter0.1 effect on the location result. Interval Type 0~3600 0~360, step: has Azimuth of the main lobe of the cell antenna (the counter-clockwise angle from the direction ofstep:main lobe to the north).The value of this par Interval Type 0~3600 0~360, the 0.1
Access point(AP) cell indicator. When the Type Enumeration indicator is TRUE, it indicates that the cell isFALSE,TRUE TRUE, FALSE AP cell. Upper-layer application type Enumeration link.At Iu-b Interface the Upper-Layer application type is NBAP,at Iu-r, Iu-PS and Iu-CS Interface th of the SCTP Type NBAP, M3UA NBAP, M3UA This parameter specifies the direction where the current typical RAB parameters are applied. Enumeration Type APPLIED_ON_UPLINK, APPLIED_ON_DOWNLINK, APPLIED_ON_BOTH APPLIED_ON_UPLINK, APPLIED_ON_DOWNLINK Area flag. Enumeration Type PRIMARY(Active Area), STANDBY(Standby area), ALL PRIMARY,STANDBY,ALL This parameter specifies the flag of the active and standbyPRIMARY(Primary), STANDBY(Standby), ALL Enumeration Type areas. PRIMARY, STANDBY, ALL User_priority corresponding to Allocation/Retention priority 10. Silver, Copper Enumeration Type Gold, Gold,Silver,Copper User_priority corresponding to Allocation/Retention priority 11. Silver, Copper Enumeration Type Gold, Gold,Silver,Copper User_priority corresponding to Allocation/Retention priority 12. Silver, Copper Enumeration Type Gold, Gold,Silver,Copper User_priority corresponding to Allocation/Retention priority 13. Silver, Copper Enumeration Type Gold, Gold,Silver,Copper User_priority corresponding to Allocation/Retention priority 14. Silver, Copper Enumeration Type Gold, Gold,Silver,Copper User_priority corresponding to Allocation/Retention priority 1. Silver, Copper Enumeration Type Gold, Gold,Silver,Copper User_priority corresponding to Allocation/Retention priority 2. Silver, Copper Enumeration Type Gold, Gold,Silver,Copper User_priority corresponding to Allocation/Retention priority 3. Silver, Copper Enumeration Type Gold, Gold,Silver,Copper User_priority corresponding to Allocation/Retention priority 4. Silver, Copper Enumeration Type Gold, Gold,Silver,Copper User_priority corresponding to Allocation/Retention priority 5. Silver, Copper Enumeration Type Gold, Gold,Silver,Copper User_priority corresponding to Allocation/Retention priority 6. Silver, Copper Enumeration Type Gold, Gold,Silver,Copper User_priority corresponding to Allocation/Retention priority 7. Silver, Copper Enumeration Type Gold, Gold,Silver,Copper User_priority corresponding to Allocation/Retention priority 8. Enumeration Type Gold, Silver, Copper Gold,Silver,Copper User_priority corresponding to Allocation/Retention priority 9. Silver, Copper Enumeration Type Gold, Gold,Silver,Copper This parameter specifies the number of times the ARP resends after the specified time exceeds. Assume that "ARP packet resend times" is set to Interval Type 3~10 3 to 10 This parameter specifies the time-out Type for the ARP packets. Interval value 3~10 300 to 1000 This parameter specifies the number of an ATM logical port. Interval Type 0~255 0 to 255 This parameter specifies the number of the slot bearing NodeB ATM transport. Interval Type 14~27 14 to 27 This parameter specifies the number of the subrack bearing NodeB ATM transport. Interval Type 0~5 0 to 5 Indicating whether attach/detach is allowed. NOT_ALLOWED indicates that MS cannot apply the IMSI attach/detach procedure. ALLOWED i Enumeration Type NOT_ALLOWED, ALLOWED NOT_ALLOWED,ALLOWED
This parameter specifies the authenticationType during PPP or MLPPP link negotiation. Enumeration mode SERVER, CLIENT SERVER(sever mode), CLIENT(client mode)
This parameter specifies the user name for PPP or MLPPP-link negotiation. String Type
0 to 63 character
This parameter specifies the password for PPP or MLPPP - negotiation. String Type link
0 to 15 character
This parameter specifies the authenticationType Enumeration protocol type during PPP or MLPPP link negotiation. verify), PAP_V(PAP verify), CHAP_V(CHA NO_V, PAP_V, CHAP_V NO_V(not
This parameter specifies whether the auto negotiation is enabled. 1. The auto negotiation must be enabled when "Board type " is set to FG2a, and "Port type" is set to GE. 2. If the auto negotiation is enabled, the transmission rate over the FE port, work mode, and flow control mode depend on the negotiation results. If the auto negotiation not disabled, you can set the transmission rate over the FE port, work mode, and flow control mode. In this case, ensure that the settings are the same as those of the peer end; otherwise, transport failure may occur. 3. If the auto negotiation is enabled at the local end, the auto negotiation must be enabled at the peer end.
Enumeration Type ENABLE, DISABLE ENABLE, DISABLE Identifying the available signature end index of an ASC. For detailed information of this parameter, refer to 3GPP TS 25.304. Interval Type 0~15 0~15 Identifying the available signature start index of an ASC. For detailed information of this parameter, refer to 3GPP TS 25.304. Interval Type 0~15 0~15 Identifying the available sub channelsType ASC. When a 0~15 been accessed to a sub channel, if [AICH transmission timing] is set to 1 (usi Interval of an UE has 0~15 The Capability of CN node. Interval Type 0~65535 0~65535000 step:1000 This parameter specifies the alarm level. Type Enumeration LOW(Low), HIGH(High) LOW,HIGH This parameter specified the output switch TypekHz outputOFF, ON Enumeration of 8 clock 1. OFF, ON This parameter specified the output switch TypekHz outputOFF, ON Enumeration of 8 clock 2. OFF, ON If [Auto-Adaptive Background Noise Type Switch] is set to OFF, it is used to set background noise of the cell. If [Auto-Adaptive Background Interval Update 0~621 -112~-50,step:0.1 This parameter specifies the full path for saving the backup file. If the specified path is not a128 characters it will be treated as the relative path String Type 0 to full path, then This parameter specifies the IP address of the standby port. IP Address Type 0.0.0.0~255.255.255.255 This parameter specifies the mask of the Type port. IP Address standby 0.0.0.0~255.255.255.255 This parameter specifies the virtual IP address for the BAM external network. IP Address Type 0.0.0.0~255.255.255.255 This parameter specifies the subnet maskType BAM external network. IP Address of the 0.0.0.0~255.255.255.255
Indicating the selected frequency Band in the cell setup process. For detailed information Band5,parameter, refer Band8, Band9, BandIndNotUs Enumeration Type Band1, Band2, Band3, Band4, of this Band6, Band7, to 3GPP TS 25.433. Band7, B Band1, Band2, Band3, Band4, Band5, Band6, This parameter specifies the maximum available bandwidth for each traffic class in the Cell_FACH state with the downlink HSDSCH in use. If Interval Type 1~1000 1~1000 Uniquely identifying a neighboring base station with the same carrier. Interval Type 0~7 0~7
Identifying BCCH frequency number of the inter-RAT cell. BCCH: Broadcast Control Channel GSM1900 Frequency number: (511811) GSM1800 Frequency number: (511866) GSM900 Frequency number: (0-125) or (954-1024) GSM850 Frequency number: (127252) GSM450 Frequency number: (258294) GSM480 Frequency number: (305341) Interval Type 0~1023 0~1023 This parameter specifies the transmission power of the HS-PDSCH that sends the data carried on the BCCH. When UE receive data from the HS Interval Type -350~150 -35~15,step:0.1 When UE is in Enhanced CELL_FACH state, the data on the BCCH is also sent on the -35~15,step:0.1 Interval Type -350~150 HS-PDSCH. Meanwhile, the HS-SCCH shall send signa Offset of the BCH transmit power from the PCPICH transmit power in a cell. If the value is set too small, the UEs on the cell edge cannot receiv Interval Type -350~150 -35~15, step: 0.1 This parameter specifies the bearer type of the service. - R99: The service is carried on a non-HSPA channel. - HSPA: The service is carried on an HSPA Enumeration Type R99, HSPA R99, HSPA channel. Indicating the bear type of the DSP is MTP3 or M3UA. MTP3, M3UA Enumeration Type MTP3, M3UA HeatBeat Sending Time Interval. Interval Type 1~10 5 HeatBeat Sending Time Interval. Interval Type 1~10 2 HeatBeat Sending Time Interval. Interval Type 1~60 1~60 The bit rate threshold used toEnumeration Type to perform soft handoverD64, D128, D144, D256,service 144, 256, If current DL DCH bit rates determine whether D8, D16, D32, for the Best Effort (BE) D384 on DCH. 384 8, 16, 32, 64, 128, Timer for state transition from CPC_HS-DSCH to E_FACH of BE services, used to detect whether a BE UE in CELL_DCH(with CPC_HS-DS Interval Type 1~65535 1~65535 Timer for state transition from CPC_HS-DSCH to FACH of BE services, used to detect1~65535 a BE UE in CELL_DCH(with CPC_HS-DSCH Interval Type 1~65535 whether Timer for state transition from DCH to E_FACH of BE services, used to detect whether1~65535 in CELL_DCH(with DCH) state is in stable lo Interval Type 1~65535 a BE UE Timer for state transition from DCH to FACH of BE services, used to check whether the UE in the CELL_DCH state with non-real-time service Interval Type 1~65535 1~65535
The first action selected by the QoS control algorithm when the DL QoS of BE InterFreqHO, InterRatHO action is RateDegrade, then the rate w Enumeration Type None, RateDegrade, service deteriorates.If QoS InterFreqHO, InterRatHO None, RateDegrade,
The second action selected by the QoS control algorithm when the DL QoS of BE service deteriorates.If QoSInterFreqHO, InterRatHO the ra Enumeration Type None, RateDegrade, InterFreqHO, InterRatHO None, RateDegrade, action is RateDegrade, then
The third action selected by the QoS control algorithm when the DL QoS of BEInterFreqHO, InterRatHO action is RateDegrade, then the rate Enumeration Type None, RateDegrade, service None, RateDegrade, InterFreqHO, InterRatHO deteriorates.If QoS Timer for state transition from E-DCH to FACH of BE services, used to check whether 1~65535 Interval Type 1~65535 the UE with BE services carried over the E-DCH is in th
This parameter specifies the threshold of the traffic volume of 4A event forD128, D256,16, 32, 64, 128, D2k, 512, 1024, 2k, 3k, 4k,to CPC.D16k Enumeration Type D16, D32, D64, triggering the transition of BE services D4k, D6k, D8k, 6k, 8k, 12k, D512, D1024, 256, D3k, from E_FACH D12k, If the This parameter specifies the occurrence time of 4A event for triggering the transitionD80, 10, 20, D120, D160, D200, D240,200, 240, 320,D128 Enumeration Type D0, D10, D20, D40, D60, of0, D100, 40,from80, 100, 120, CPC. D320, D640, 640, BE services 60, E_FACH to 160, This parameter pre
This parameter specifies the threshold of the traffic volume of 4A event forD128, D256,16, 32, 64, 128, D2k, 512, 1024, 2k, 3k, 4k,to DCH.12k, Enumeration Type D16, D32, D64, triggering the transition of BE services D4k, D6k, D8k, 6k, 8k,D16k D512, D1024, 256, D3k, from E_FACH D12k, If th This parameter specifies the occurrence time of 4A event for triggering the transitionD80, 10, 20, D120, D160, D200, D240,200, 240, 320,D128 Enumeration Type D0, D10, D20, D40, D60, of0, D100, 40,from80, 100, 120, DCH.D320,parameter pre BE services 60, E_FACH to 160, This D640, 640,
This parameter specifies the threshold of the traffic volume of 4A event forD128, D256,16, 32, 64, 128, D2k, 512, 1024, 2k, 3k, 4k,to HS-DSCH Enumeration Type D16, D32, D64, triggering the transition of BE services D4k, D6k, D8k, 6k, 8k,D16k D512, D1024, 256, D3k, from E_FACH D12k, 12k, This parameter specifies the occurrence time of 4A event for triggering the transitionD80, 10, 20, D120, D160, D200, D240,200, 240, 320,D128 Enumeration Type D0, D10, D20, D40, D60, of0, D100, 40,from80, 100, 120, HS-DSCH. This paramet BE services 60, E_FACH to 160, D320, D640, 640, This parameter specifies the threshold of the traffic volume of 4A event forD128, D256,16, 32, 64, 128, D2k, 512, 1024, 2k, 3k, 4k,E-DCH D16k Enumeration Type D16, D32, D64, triggering the transition of BE services D4k, D6k, D8k, 6k, 8k, with D512, D1024, 256, D3k, from FACH to D12k, 12k, This parameter specifies the occurrence time of 4A event for triggering the transitionD80, 10, 20, D120, D160, D200, D240,200, 240, 320,D128 Enumeration Type D0, D10, D20, D40, D60, of0, D100, 40,from80, 100, to E-DCH with CPC technolog BE services 60, FACH 120, 160, D320, D640, 640,
This parameter specifies the threshold of the traffic volume of 4A event forD128, D256,16, 32, 64, 128, D2k, 512, 1024, 2k, 3k, 4k,HS-DSCH wi Enumeration Type D16, D32, D64, triggering the transition of BE services D4k, D6k, D8k, 6k, 8k,D16k D512, D1024, 256, D3k, from FACH to D12k, 12k, This parameter specifies the occurrence time of 4A event for triggering the transitionD80, 10, 20, D120, D160, D200, D240,200, 240, 320,D128 Enumeration Type D0, D10, D20, D40, D60, of0, D100, 40,from80, 100, to HS-DSCH withD640, techno BE services 60, FACH 120, 160, D320, CPC 640,
This parameter specifies the threshold of the traffic volume of 4A event forD128, D256,16, 32, 64, 128, D2k, 512, 1024, 2k, 3k, 4k,DCH. IfD16k Enumeration Type D16, D32, D64, triggering the transition of BE services D4k, D6k, D8k, 6k, 8k, 12k,v D512, D1024, 256, D3k, from FACH to D12k, the
This parameter specifies the occurrence time of 4A event for triggering the transitionD80, 10, 20, D120, D160, D200, D240,200, 240, 320,D128 Enumeration Type D0, D10, D20, D40, D60, of0, D100, 40,from80, 100, to DCH. This parameter preve BE services 60, FACH 120, 160, D320, D640, 640, This parameter specifies the threshold of the traffic volume of 4A event forD128, D256,16, 32, 64, 128, D2k, 512, 1024, 2k, 3k, 4k,E-DCH. 12k, Enumeration Type D16, D32, D64, triggering the transition of BE services D4k, D6k, D8k, 6k, 8k,D16k D512, D1024, 256, D3k, from FACH to D12k, If th This parameter specifies the occurrence time of 4A event for triggering the transitionD80, 10, 20, D120, D160, D200, D240,200, 240, 320,D128 Enumeration Type D0, D10, D20, D40, D60, of0, D100, 40,from80, 100, to E-DCH. D320, D640, 640, BE services 60, FACH 120, 160, This parameter pre
This parameter specifies the threshold of the traffic volume of 4A event forD128, D256,16, 32, 64, 128, D2k, 512, 1024, 2k, 3k, 4k,HS-DSCH. If Enumeration Type D16, D32, D64, triggering the transition of BE services D4k, D6k, D8k, 6k, 8k,D16k D512, D1024, 256, D3k, from FACH to D12k, 12k, This parameter specifies the occurrence time of 4A event for triggering the transitionD80, 10, 20, D120, D160, D200, D240,200,This parameter Enumeration Type D0, D10, D20, D40, D60, of0, D100, 40,from80, 100, to HS-DSCH. 240, 320,D128 BE services 60, FACH 120, 160, D320, D640, 640, Timer for state transition from FACHType of BE services, used to check whether the1~65535 CELL_FACH state is in the stable low activi Interval to PCH 1~65535 UE in the Timer for state transition from HS-DSCH to E_FACH of BE services, used to detect whether a BE UE in CELL_DCH(with HS-DSCH) state is Interval Type 1~65535 1~65535 Timer for state transition from HS-DSCH to FACH of BE 1~65535 used to check whether the UE in the CELL_DCH(with HS-DSCH) state wit Interval Type services, 1~65535 Pending time after the traffic Enumeration Type reported.D250,parameter is used to prevent 500,many traffic volume8000, 16000 volume event 4B is This D500, D1000, D2000, 250, too D8000, 2000, 4000, events 4B being reported. D4000, 1000, D16000
This parameter is used to check whether the UE in the lowD8, D16, D32,If the UE is on8, 16,D512, channel,D2k, D3k, D4k, counter increases12 Enumeration Type activity state. D64, D128, D256, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, b HS-DSCH D1024, the low activity D6k, D8k, D12k, D When the traffic volume is below the 4B threshold and remains so for the D40, D60, D80, 10, thisD120, D160, D200, D240,200, 240, 320,D128 Enumeration Type D0, D10, D20, period specified D100, 40, 60, 80, 100,event 4B is D320, D640, 640, 0, by 20, parameter, the 120, 160, reported. This para This parameter specifies the rate threshold Type TTI on the E-DCH for HSUPA BE D144, D256, D384, D608, D1440, D2048, D2880 allow Enumeration of 2ms D8, D16, D32, D64, D128, service. When the cell capability and UE capability 8,16,32,64,128,144,256,384,608,1440,2048,2880 Timer for rejecting rate increase after Typedecrease is performed across the Iur interface0~1024 services. If the best cell is on the DRNC, the tim Interval rate 0~1024 for BE
The ralative power margin of Interval Type single BE traffic, used to calculate the triggering threshold of event F,0.1 avoid the fluctuation of traffic rate in ca 0~100 0~10, step: can When the parameter is set to YES, the QOS control algorithm is used for BE services. WhenYESparameter is set to NO, the QOS control algorit Enumeration Type NO, YES NO, the This parameter specifies the power occupancy of the control part of reference TFC. For1~15 of this parameter, refer to the 3GPP TS 25.214. Interval Type 1~15 details This parameter specifies the power occupancy of the data part of reference TFC. For details of this parameter, refer to the 3GPP TS 25.214. Interval Type 1~15 1~15
The first action selected by the QoS control algorithm when the UL QoS of BE InterFreqHO, InterRatHO action is RateDegrade, then the rate w Enumeration Type None, RateDegrade, service deteriorates.If QoS InterFreqHO, InterRatHO None, RateDegrade,
The second action selected by the QoS control algorithm when the UL QoS of BE service deteriorates.If QoSInterFreqHO, InterRatHO the ra Enumeration Type None, RateDegrade, InterFreqHO, InterRatHO None, RateDegrade, action is RateDegrade, then
The third action selected by the QoS control algorithm when the UL QoS of BEInterFreqHO, InterRatHO action is RateDegrade, then the rate Enumeration Type None, RateDegrade, service None, RateDegrade, InterFreqHO, InterRatHO deteriorates.If QoS For BE service, When the parameter is set Type Enumeration to SINGLE, an UL event 6A1 or 5A can independentlyCOMBINE QOS enhancement action. The 6A SINGLE, COMBINE SINGLE, trigger the Event 5A measurement switch when BeUlEvTrigInd is setNO, YES for BE service. If thisYES Enumeration Type to SINGLE NO, parameter is set to YES, event 5A measurement is Event 6A1 measurement switch when BeUlEvTrigInd is set to SINGLE for BE service. NO, YES Enumeration Type NO, YES If this parameter is set to YES, event 6A1 measurement UL event 6D measurement switch for BE service. If this parameter is set to YES, event NO,measurement is delivered. Enumeration Type NO, YES 6D YES
Timer to trigger the next QoS enhancement action for UL BE services. This parameter specifies the duration of waiting for the UL QoS enhanced acknowledgement after UL rate adjustment. The timer starts when the BE UL rate adjustment procedure is triggered, and stops when the RNC receives a 6B1/6B2 event or when the timer expires. Interval Type 20~64000 20~64000 This parameter specifies the number of times the BFD packets time out. If several consecutive packets are not received, the BFD session is rega Interval Type 3~10 3 to 10 The MAC-c flow on the Iub interface Typeincrease after Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CE Interval will 1~1000 1~1000 The MAC-c flow on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CE Interval Type 1~2000 1~2000
This parameter is applied when [PARA]BGNSwitch[/PARA] is set to ON. (1) If the difference of measured background noise without filtered Interval Type 1~400 0.1~40, step:0.1 Only when the measured background Type duration reaches this parameter, the output1~6000 Interval noise's 1~6000 of the auto-adaptive background noise update filter cou
(1) This parameter, along with the [Algorithm start time], is used to limit the validation time of the background noise automatic updata algorithm. If [Algorithm stop time] is greater than [Algorithm start time], and the background noise automatic updata algorithm is enabled, then the algorithm is activated during the period of [Algorithm stop time] to [Algorithm start time] each day. In other periods, the algorithm fails. If [Algorithm stop time] is less than [Algorithm start time], and the background noise automatic updata algorithm is enabled, then the algorithm is activated during the period of [Algorithm stop time] each day to [Algorithm start time] of the next day. In other periods, the algorithm fails. (2) Input format: HH&MM&SS. Compound Type hour, min, sec hour{0~23}, min{0~59}, sec{0~59} When the number of uplink equivalent users is not larger than this parameter, the RTWP could be regarded as background noise. Therefore, the Interval Type 0~10 0~10
(1) This parameter, along with the [Algorithm stop time], is used to limit the validation time of the background noise automatic updata algorithm. If [Algorithm stop time] is greater than [Algorithm start time], and the background noise automatic updata algorithm is enabled, then the algorithm is activated during the period of [Algorithm stop time] to [Algorithm start time] each day. In other periods, the algorithm fails. If [Algorithm stop time] is less than [Algorithm start time], and the background noise automatic updata algorithm is enabled, then the algorithm is activated during the period of [Algorithm stop time] each day to [Algorithm start time] of the next day. In other periods, the algorithm fails. (2) Input format: HH&MM&SS. Compound Type hour, min, sec hour{0~23}, min{0~59}, sec{0~59} When the parameter is 'OFF',Enumeration Typebackground noise update algorithm is switched off. Otherwise, the algorithm is switched on. the auto-adaptive OFF, ON OFF, ON
The difference of RTWP thatInterval the update of background noise. If the difference is larger than the threshold, the background will be updat trigger Type 1~100 0.1~10, step:0.1 This parameter specifies the target transmission quality of -63~0 that is, target BLER of5*10^(-7)~1 radio interface if the subflow is carried on Interval Type DCH, DCH on the
Indicating whether to perform blind handover. FALSE: The cell is not in the alternative cells for blind handover, so blind handover to this cell cannot be triggered. TRUE: The cell is in the alternative cells for blind handover, so blind handover to this cell might be triggered. Enumeration Type FALSE, TRUE FALSE,TRUE This parameter is used in the Enumeration the load reshuffling (LDR) intra-frequency blind handover. This parameter defines how many measur algorithm of Type D1, D2, D4, D8 1,2,4,8 This parameter specifies the intra-frequency measurement D250, D500 of blind handover. It determines the intra-frequency measurement repo Enumeration Type report interval 250,500
Indicating the priority of blind handover. The value 0 represents the highest priority. Priorities 0~15 are assigned to concentric neighboring cells, which can ensure successful handover. Priorities 16~30 are assigned to neighboring cells for blind handover, which cannot ensure successful handover.
Interval Type
0~30
0~30
Blind handover condition. If the value is not -115, the handover is defined as Conditional Blind HO, which is used for the interfrequency neighboring cells of the same coverage. If the value is -115, the handover is defined as Direct Blind HO, which is used for the inter-frequency neighboring cells of larger coverage. Interval Type
-115~-25
-115~-25
This parameter specifies the quality threshold for the event 1F reported cell to trigger blind handover. This parameter defines the lowest quality threshold of the emergency blind handover. The blind handover is implemented only if the signal quality in the cell, which reports event 1F, exceeds the specified threshold. Otherwise, the report will be discarded. This parameter is set to raise the possibility of successful blind handover. If the signal quality in the cells that report event 1F are all very poor, this indicates that the user is located at the edge of coverage area. Under this condition, if the blind handover is initiated rashly, the possibility of call drop increases.
Interval Type -115~-25 -115~-25 This timer is started when an Intervalsignaling entity sends 2000~60000 a request for blocking an AAL2 path. AAL2 Type the peer node 2000~60000 This parameter specifies the flag for reporting the alarm tononrpt(Notbox. Enumeration Type the alarm Report), rpt(Report) nonrpt,rpt This parameter specifies the board class. Type Enumeration INT, DPU, XPU INT,DPU,XPU This parameter specifies the type of a board. Enumeration Type PEUa, AEUa, FG2a, GOUa, PEUa,AEUa,FG2a,GOUa,AOUa,POUa,UOIa,SPUa,DP AOUa, POUa, UOIa, SPUa, DPUb This parameter specifies the type of a board. Enumeration Type FG2a, GOUa FG2a, GOUa This parameter specifies the type of a board. Enumeration Type PEUa, POUa, UOIa PEUa, POUa, UOIa This parameter specifies the type of a board. Enumeration Type PEUa, POUa PEUa,POUa
Base Station Identity Code (BSIC) verification switch. 1. BSIC(Base Station Identity Code): identity code of the base station. 2. This parameter is used to control cells where interRAT measurement reports are triggered. When the value is REQUIRED, the measurement report is triggered after the BSIC of the measured cell is deciphered correctly; when the value is NOT_REQUIRE, measurement reporting is triggered whatever the BSIC is deciphered or not, if the measured cell meets the reporting conditions. This parameter is valid for both periodical report mode and event report mode. To ensure the reliability of handovers, the system reports only the cells of which the BSIC is correctly decoded, that is, the recommended value of the parameter is REQUIRED. If the parameter is set to NOT_REQUIRED, Enumeration Type REQUIRED(Verify mode), NOT_REQUIRE(Non-verify mode) REQUIRED, NOT_REQUIRE handovers occur more This parameter specifies the type of a board. Enumeration Type AEUa, PEUa, AOUa, POUa AEUa,AOUa,PEUa,POUa This parameter specifies the type of a board. Enumeration Type AEUa, PEUa, AOUa, POUa AEUa, PEUa, AOUa, POUa This parameter specifies the type of a board. Enumeration Type PEUa(PEUa), AEUa(AEUa),AEUa, PEUa, AOUa, POUa AOUa(AOUa), POUa(POUa) This parameter specifies the type of the board where the command is executed. SPUa, SCUa, GCUa, GCGa, FG2a, GOUa, PEUa, AEUa, FG2 Enumeration Type SCUa, GCUa, GCGa, DPUb, PEUa, AEUa, SPUa, DPUb, AOUa, POUa, UOI This parameter specifies the type of a board. Enumeration Type AEUa, PEUa, AOUa, POUa,AEUa, PEUa, AOUa, POUa, UOIa UOIa This parameter specifies the type of a board. Enumeration Type AEUa, PEUa, AOUa, POUa AEUa, PEUa, AOUa, POUa This parameter specifies the type of the board to be set. SCUa, GCUa/GCGa, SPUa, DPUb, GCUa/GCGa, SPUa, DPUb, AEUa/PEUa/AOUa Enumeration Type SCUa, AEUa/PEUa/AOUa/UOIa/FG2a/GOUa/POUa, M This parameter specifies the type of a board. Enumeration Type AEUa, AOUa AEUa, AOUa This parameter specifies the type of a board. Enumeration Type AOUa, POUa, UOIa AOUa, POUa, UOIa This parameter specifies the type of a board. Enumeration Type AEUa, AOUa, UOIa AEUa, AOUa, UOIa This parameter specifies whether the dynamic bandwidth adjustment switch for the logical port is turned on. The function must be used together Enumeration Type OFF, ON OFF, ON
When the remaining receive bandwidth is smaller than or equal to this parameter value, 0 to backward congestion alarm is triggered. Interval Type 0~1000000 the 1000000
This parameter specifies the backward congestion threshold. When the remaining bandwidth reaches this parameter value, the backward conges Interval Type 0~100000 0~100000 This parameter specifies the remaining bandwidth threshold for generating the backward congestion alarm. Interval Type 0~149000 AOUa/AEUa: 0~64000; UOIa (directly carried on the le
If the available backward bandwidth is less than or equal to this value, the backward congestion alarm is emitted. Interval Type 0~320000 0~320000
If the available backward bandwidth is less than or equal to this value, the backward congestion alarm is emitted. Interval Type 0~3000000 0~3000000
If the available backward bandwidth is less than or equal to this value, the backward congestion alarm is emitted. Interval Type 0~4000000 0~4000000
When the remaining receive bandwidth is greater than this0~1000000value, the backwardto 1000000 alarm is cleared. Interval Type parameter 0 congestion
This parameter specifies the backward congestion clear threshold. When the remaining bandwidth reaches this parameter value, the backward co Interval Type 0~200000 0~200000 This parameter specifies the remaining bandwidth threshold for clearing the backward congestion. Interval Type 0~149000 AOUa/AEUa: 0~64000; UOIa (directly carried on the le
If the available backward bandwidth is greater than this value, the backward congestion 0~320000 Interval Type 0~320000 alarm is cleared.
If the available backward bandwidth is greater than this value, the backward congestion 0~3000000 Interval Type 0~3000000 alarm is cleared.
If the available backward bandwidth is greater than this value, the backward congestion 0~4000000 Interval Type 0~4000000 alarm is cleared.
This parameter specifies the receive bandwidth reserved for the user in handover. Interval Type 0~1000000
0 to 1000000
This parameter specifies the backward handover reserved bandwidth. It is the receive bandwidth reserved for the user in handover. Interval Type 0~50000 0~50000 This parameter specifies the bandwidth reserved for the backward handover. Interval Type 0~149000 AOUa/AEUa: 0~64000; UOIa (directly carried on the le
0~320000
0~320000
0~3000000
0~3000000
Reserved backward bandwidth for handover user. Interval Type 0~4000000 0~4000000 This parameter specifies the maximum bandwidth estimate100~1000 the ratio of the bandwidth of each rate up to the current bandwidth. Interval Type ratio. It is 100~1000 Bandwidth mode.This parameter is valid only when Transport Resource Group Type is IP. Enumeration Type FULL_DUPLEX, HALF_DUPLEX FULL_DUPLEX, HALF_DUPLEX This parameter specifies the bandwidth change threshold of the load control algorithm. When the bandwidth adjustment exceeds this threshold, Interval Type 0~100 0~100 The parameter values are described as follows: NODEB_CREDIT_CAC_S WITCH: The system performs CAC based on the usage state of NodeB credit. When the NodeB's credit is not enough, the system rejects new access requests.
Indicating whether to control Bit Field Type call shock. SYS_LEVEL(SYS_LEVEL),SYS_LEVEL,NODEB_LEVEL,CELL_LEVEL NODEB_LEVEL(NODEB_LEVEL), CELL_LEVEL(C Indicating the period of call shock control judging. Interval Type 1~5 1~5 Decide which carrier is prior Enumeration Type when ARP and TrafficClass are both DCH, HSPA NONE, identical. NONE,DCH,HSPA Number of the subrack from which the AAL2 Path is led out of RNC. Interval Type 0~5 0~5 This field indicate whether the IP Path is carried on IP logic port or resource group or null. Enumeration Type NULL, IPLGCPORT, RSCGRP NULL, IPLGCPORT, RSCGRP
This parameter specifies the number of the fractional ATM link bearing PVC. The fractional ATM link must have been configured. Interval Type 0~31 0 to 31
This parameter specifies the number of the IMA group bearing the PVC. The IMA group to 83 have been configured. Interval Type 0~83 0 must
SAAL, SCTP, SAAL-SCTP. Enumeration Typebased on ATM, set Bearing link type to SAAL, SCTP, theType),is based on IP, set Bearing link t When the NCP is SAAL(SAAL Link Type ), SCTP(SCTP Link NCP SAAL-SCTP(SAAL-SCTP Lin SAAL. When SAAL-SCTP
This parameter specifies the number of the port on the UOIa_ATM bearing VCL. Interval Type 0~3 This parameter specifies the number of the optical port that carries the logical port. Interval Type 0~3
0 to 3 0~3
Number of the slot bearing the SAALType Interval link. 14~27 14~27 Number of the subrack bearing the SAAL link. Interval Type 0~5 0~5 This parameter specifies the bearing type of a logical port. ETHER, PPP, TRUNK Enumeration Type ETHER PPP TRUNK This parameter specifies the bearing type of a logical port. IMA, UNI, FRA, NCOPT, ATMLOGICPORT upper-level logical port must be a Hu Enumeration Type If the bearing type of a logical port is ATM, the IMA,UNI,FRA,NCOPT,ATMLOGICPORT
Enumeration Type
UNI, IMA, FRAATM, NCOPT, ATMLGCPORT, NULL UNI, IMA, FRAATM, NCOPT, ATMLGCPORT, NUL
This parameter specifies the number of the UNI link bearing PVC. The UNI link must have 167 configured. Interval Type 0~167 0 to been
The value of bearing VCI.VCI of the Type link that goes 32~65535 RNC. Interval SAAL out of the
32~65535
The value of bearing VPI.VPI of the SAAL link that goes out of the RNC. Interval Type 0~255
0~255
This parameter specifies the number of the ATM logic port bearing VCL. Interval Type 0~383 IP address of the CBC (Cell Broadcast Center). IP Address Type Mask of the sub-network of the CBC IP address. IP Address Type This parameter specifies the maximum burst size. Interval Type 4500~32767 A CBS Operator of the cell. Interval Type 0~3
Together with PLMN code and LAC, Type Interval uniquely corresponding to a cell. 0~65535 0~65535 Switch of inner CBS. Enumeration Type OFF(OFF), ON(ON) OFF, ON The MAC-c on Iub interface Interval Typeafter the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_F will increase 1~1000 1~1000 The MAC-c on Iub interface Interval Typeafter the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_F will increase 1~2000 1~2000
Common channel primary path. Enumeration Type Common channel bearing primary path load threshold. Interval Type
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF 0~100 0~100
Common channel secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF Common channel primary secondary path load ratio threshold. Interval Type 0~100 0~100 This parameter specifies the period of sending the CCMs in an MA. Enumeration Type 10, 100, 1000 10,100,1000 This parameter specifies the mode of activating the CC on AUTO, MANUAL mode, the CC need not be activated on the peer. Enumeration Type the VCL. In AUTO AUTO,MANUAL UNI: 700~1000 NNI: 100~1000 Protection timer started after Interval Type RS or ER messages are sent.If the timer expires, these messages are resent. the BGN, END, 100~1000 This parameter specifies the delay variation that can be tolerated. Physical unit: 0.1 us. 102400 to 1330000000 Interval Type 1024~13300000 When call shock control starts, the AMR_RRC number can be accessed per second for cell. Interval Type 1~100 1~100 Average altitude of the cell coverage area in the WGS-84 coordinates. This is controlled by MTRLGY and valid when MET~0(metric system). Interval Type -32767~32767 -32767~32767 This parameter specifies the average altitude of the cell coverage area in the WGS-84 coordinates. This is controlled by MTRLGY and valid wh Interval Type -107502~107502 -107502~107502 The algorithms with the above values represent are as follow: TX_DIVERSITY_ON_TO _OFF:When TX Diversity is on to off,the algorithms of cell capacity auto handle is open. TX_DIVERSITY_OFF_TO _ON:When TX Diversity is off to on,the algorithms of cell capacity auto handle is open. Bit Field Type
1)DELAY_ACTIVATION _SUPPORT (delay activation support indicator):when the indicator is TRUE, it means that the cell support delay activation. Delayed Activation IE indicates that the activation of the DL power shall be delayed until an indicated CFN or until a separate activation indication is received. 2)HSDSCH_SUPPORT(HS DSCH support indicator):when the indicator is TRUE, it means that the cell support HSDSCH and enable downlink traffic to be established in HSDSCH. 3)FDPCH_SUPPORT(FDPCH support indicator):when the indicator is TRUE, it means that the cell support FDPCH and enable downlink signal to be established in FDPCH, but the cell can not support F-DPCH if it does not support HSDSCH. 4)EDCH_SUPPORT(EBit Field Type DELAY_ACTIVATION_SUPPORT(delay activation support indication), HSDSCH_ DELAY_ACTIVATION_SUPPORT,HSDSCH_SUPPO DCH support Altitude of the cell center in the WGS-84 coordinates. This is controlled by MTRLGY and valid when MET~0(metric system). Interval Type -32767~32767 -32767~32767 This parameter specifies the altitude of the cell center in the WGS-84 coordinates. This -107502~107502 Interval Type -107502~107502 is controlled by MTRLGY and valid when IMP~1(Britis
Latitude of the cell center in the WGS-84 coordinates. The value corresponding to the latitude A degrees B minutes C seconds is [A + (B/60) + (C/3600)] x 0.000001. For example, the value corresponding to the latitude 31 degrees 30 minutes 36 seconds is [31 + (30/60) + (36/3600)] x 0.000001 = 31510000. This is controlled by GCDF and valid when DEG~0(degree format). Interval Type -90000000~90000000 -90~90, step: 0.000001 This parameter specifies the latitudeType cell center in the WGS-84 coordinates. The input format is ddd:mm:ss.ssss. This is controlled by GC String of the -90~90
Longitude of the cell center in the WGS-84 coordinates. The value corresponding to the longitude A degrees B minutes C seconds is [A + (B/60) + (C/3600)] x 0.000001. For example, the value corresponding to the longitude 121 degrees 40 minutes 36 seconds is [121 + (40/60) + (36/3600)] x 0.000001 = 121676666. This is controlled by GCDF and valid when DEG~0(degree format).
Interval Type -180000000~180000000 -180~180, step: 0.000001 This parameter specifies the longitude of the cell center in the WGS-84 coordinates. The input format is ddd:mm:ss.ssss. This is controlled by GCDF and valid when SEC~1(degree, minute, second format). String Type -180~180 Indicating the target cell choose method. Type Enumeration ALLCELL(All cell), 3GCELL(3G cell), GSMCELL(GSM cell) ALLCELL,3GCELL,GSMCELL Environment type of the cell coverage area. Enumeration Type NLOS_ENVIRONMENT, LOS_ENVIRONMENT, MIXED_ENVIRONMENT MI NLOS_ENVIRONMENT, LOS_ENVIRONMENT, Defining the radio environment type of theType such as a typical town cell, urban cell, and mountain area cell. Enumeration cell, TU, RA, HT TU, RA, HT Deviation of altitude standard in the cell coverage area in the WGS84 coordinates. This is controlled by MTRLGY and valid when MET~0(metric system). Interval Type -10000~10000 -10000~10000 This parameter specifies the standard deviation of altitude in the cell coverage area in the WGS-84 coordinates. This is controlled by MTRLGY and valid when IMP~1(British measurement). Interval Type -32808~32808 -32808~32808 When call shock control starts, the register and 3G->2G reselect number can be accessed per second for cell. Interval Type 1~100 1~100 This parameter specifies the host type of a Type Enumeration cell. SINGLE_HOST, DOUBLE_HOST SINGLE_HOST, DOUBLE_HOST
Uniquely identifying a cell. For detailed information of this parameter, refer to 3GPP TS 25.401. Interval Type 0~65535 0~65535 This parameter is valid when Interval Type [Cell ID Changing Switch] is1~31 Indicate the period of cell ID changing. ON. 1~31 Indicating whether to use changing cell id in UU interface.OFF, ON Enumeration Type OFF,ON Flag of CELLID+RTT location activation. Type Enumeration INACTIVE, ACTIVE INACTIVE, ACTIVE UE positioning mode when the CELLID+RTT method is selected. The UE supports both UE-based CELLID+RTT mode and UE-assisted CELL Enumeration Type UE_BASED, UE_ASSISTED, UE_BASED_PREFERRED, UE_BASED_PREFERR UE_BASED, UE_ASSISTED, UE_ASSISTED_PREFE Cell SF reserved threshold. The code load reshuffling could be triggered only when the SF4, SF8, available SF64(SF64),is higher than this thresh Enumeration Type SF4(SF4), SF8(SF8), SF16(SF16), SF32(SF32), SF of a cell SF128(SF128), SF256( minimum SF16, SF32, SF64, SF128, SF256 Cell location configuration type. Enumeration Type CELL_ANTENNA, CELL_CENTER, BOTH CELL_ANTENNA, CELL_CENTER, BOTH
String Type
1~31 characters
If the cell downlink load exceeds this Type Interval threshold, the algorithm will decrease the pilot transmitstep:0.01 the cell so as to increase the whole system 0~100 0~1, power of If the times the UE in the CELL_PCH state performs cell reselection is greater than or equal to the threshold, it is regarded that the cell reselecti Interval Type 1~65535 1~65535
Length of the cell reselectionInterval Type frequency timer. This parameter is used together with CellReSelectCounter to detect the frequency of cell reselect 1~65535 1~65535 Indicating whether the cell is Enumeration extension. If [Cell barred indicator] is NOT_BARRED, andNOT_RESERVED reserved for Type RESERVED, NOT_RESERVED RESERVED, the cell is not reserved for operators but f Indicating whether the cell is Enumeration operators. If [Cell barred indicator] is NOT_BARRED, andNOT_RESERVED for operators, the UEs reserved for Type RESERVED, NOT_RESERVED RESERVED, the cell is reserved Flag of whether adding a cell into the active set will affect the relative threshold of the event 1A. This parameter is a flag of whether adding the cell into the active set will affect the relative threshold of the event 1A NOT_AFFECT: Adding the cell into the active set does not affect the relative threshold of the event 1A. AFFECT: Adding the cell into the active set affects the relative threshold of the event 1A. Enumeration Type Flag of whether adding a cell into the active set will affect the relative threshold of the event 1B. This parameter is a flag of whether adding the cell into the active set will affect the relative threshold of the event 1B NOT_AFFECT: Adding the cell into the active set does not affect the relative threshold of the event 1B. AFFECT: Adding the cell into the active set affects the relative threshold of the event 1B. Enumeration Type AFFECT, NOT_AFFECT AFFECT,NOT_AFFECT When the RRC REQ total number of one cell reach this threshold the RRC flow control1~100 triggered. Interval Type 1~100 will be
AFFECT, NOT_AFFECT
AFFECT,NOT_AFFECT
If the cell downlink load is lower thanType threshold, the algorithm will increase the pilot transmit power of the cell so as to share load of other c Interval this 0~100 0~1, step:0.01
This parameter indicates whether RAC is configured. If the RNC supports the PS domain, the value of this parameter must be REQUIRE. Enumeration Type NOT_REQUIRE, REQUIRENOT_REQUIRE, REQUIRE Channel configuration strategy switch. 1) CFG_DL_BLIND_DETEC TION_SWITCH: When the switch is on, the DL blind transport format detection function is used for single SRB and AMR+SRB bearers. Note that the UE is only required to support the blind transport format stipulated in 3GPP 25.212 section 4.3.1. 2) CFG_HSDPA_64QAM_S WITCH: When the switch is on, 64QAM can be configured for the HSDPA service. 3) CFG_HSDPA_MIMO_SW ITCH: When the switch is on, MIMO can be configured for the HSDPA service. 4) CFG_HSPA_DTX_DRX_S WITCH: When the switch is on, DTX_DRX can be configured for the HSDPA service. 5) Bit Field Type CFG_DL_BLIND_DETECTION_SWITCH, CFG_HSDPA_64QAM_SWITCH, CFG CFG_DL_BLIND_DETECTION_SWITCH, CFG_HSD CFG_HSPA_HSSCCH_LE This parameter specifies the value of the handover protection timer. If services can be set up on channels based on a higher technique after chan Interval Type 0~999 0~999 This parameter specifies the value of the channel retry timer. The timer will start after traffic is set up or reconfigured, if higher technique is ava Interval Type 0~180 0~180 The coding type of a transport channel.For Type Enumeration detailed information of this parameter, refer to 3GPP TS 25.212. NO_CODING, CONVOLUTIONAL, TURBO NO_CODING,CONVOLUTIONAL,TURBO IP Path Ping Timeout Counts.The IP Path fault alarm will occur when the number of unsuccessful ping operation reaches this value. Interval Type 1~5 1~5 Channel index for MBMS performance. Type Enumeration CH0(Channel 0), CH1(Channel 1), CH2(Channel 2), CH3(Channel 3), CH4(Channel CH0,CH1,CH2,CH3,CH4
This parameter specifies the index of Type Interval the BFD. The check 0~31 is unique. If the check index is not specified, a unique value ranging from 0 to 3 index 0 to 31 Whether to calculate the checksum during Type Enumeration message receiving. YES NO, NO, YES Whether to calculate the checksum during Type Enumeration message sending. YES NO, NO, YES According to RFC4960, ALDER32 is not suitable for checksum in SCTP, CRC32 is recommended.CRC32 Enumeration Type ALDER32, CRC32 ALDER32,
This parameter specifies the type of the check on gateway.SBFD, ARP, MBFD Enumeration Type
If you set this parameter to TEN_MSEC, use [DL basic meas rprt cycle,Unit:10ms] to specify the measurement report period. If you set this para Enumeration Type TEN_MSEC, MIN TEN_MSEC, MIN
If you set this parameter to TEN_MSEC, use [DL OLC meas rprt cycle,Unit:10ms] to specify the measurement report period. If you set this para Enumeration Type TEN_MSEC, MIN TEN_MSEC, MIN
If you set this parameter to TEN_MSEC, use [HSDPA need pwr meas cycle,Unit:10ms]TEN_MSEC, MIN Enumeration Type TEN_MSEC, MIN to specify the measurement report period. If you set this
If you set this parameter to TEN_MSEC, use [HSDPA bit TEN_MSEC, MIN Enumeration Type rate meas cycle,Unit:10ms] to specify the measurement report period. If you set this p TEN_MSEC, MIN If you set this parameter to TEN_MSEC, use [HSDPA bit TEN_MSEC, MIN Enumeration Type rate meas cycle,Unit:10ms] to specify the measurement report period. If you set this p TEN_MSEC, MIN Value range: TEN_MSEC, MIN Physical value range: 10 milliseconds, 1 minute Content: If you set this parameter to TEN_MSEC, use [UL basic meas rprt cycle,Unit:10ms] to specify the measurement report period. If you set this parameter to MIN, use [UL basic meas rprt cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. Recommended value: TEN_MSEC Enumeration Type
TEN_MSEC, MIN
TEN_MSEC, MIN
If you set this parameter to TEN_MSEC, use [UL OLC meas rprt cycle,Unit:10ms] to specify the measurement report period. If you set this para Enumeration Type TEN_MSEC, MIN TEN_MSEC, MIN
This parameter specifies the reporting period of the event E of the AMR MIN The unit of the reporting period can be 10 ms or minute. Enumeration Type TEN_MSEC, service. TEN_MSEC, MIN
This parameter specifies the reporting period of the event E of the BE service. The unit TEN_MSEC, MIN Enumeration Type TEN_MSEC, MIN of the reporting period can be 10 ms or minute.
This parameter specifies the reporting period of the event F of the BE service. The unit of the reporting period can be 10 ms or minute. Enumeration Type TEN_MSEC, MIN TEN_MSEC, MIN
This parameter specifies the reporting period of the event E of the VP service. The unit TEN_MSEC, MIN Enumeration Type TEN_MSEC, MIN of the reporting period can be 10 ms or minute. This switch determines whether to take statistics of the performance based on the MBMS channel. One MBMS service is defined as a channel Enumeration Type OFF(OFF), ON(ON) OFF,ON Identifying a GSM cell. Interval Type 0~65535 0~65535
This parameter works with the offset of neighboring cell-oriented Cell Individual Offset-10~10, It is used for intra- or inter-frequency handover d Interval Type -20~20 (CIO). step: 0.5 It is set according to the topographic feature. This parameter is used for the inter-RAT handover decision in combination with the neighboring cell oriented CIO. The larger the sum, the higher the handover priority of the GSM cell. The smaller the sum, the lower the handover priority of the GSM cell. The parameter is generally set to 0. As for the impact on network performance: The larger the value of the parameter is, the easier it is to be handed over to the GSM network. The smaller the value of the parameter is, the harder it is to be handed over to the GSM network. Interval Type Cell individual offset for the GSM cell, which is set according to the topographic feature. This parameter is used for decision making for the inter-RAT handover. The larger the value of the parameter, the higher the handover priority of the GSM cell. The smaller the value of the parameter, the lower the handover priority of the GSM cell.
-50~50
-50~50
Interval Type
-50~50
-50~50
Neighboring cell oriented Cell Individual Offset (CIO). This parameter defines the neighboring cell oriented cell individual offset. The set value functions in combination of the cell oriented CIO. Their sum is added to the measurement quantity before the UE evaluated whether an event has occurred. In handover algorithms, this parameter is used for moving the border of a cell.
Interval Type -20~20 This parameter specifies the number of a logical port. Interval Type 1~1000 This parameter specifies the type of the clock board. Enumeration Type GCUa, GCGa Indicating whether the Closed loop time adjust mode in the cell is supported. Enumeration Type TRUE, FALSE
This parameter specifies the startup direction of compressed mode that the NodeB supports. - UL_ONLY: The NodeB supports activation of compressed mode only in the uplink. - DL_ONLY: The NodeB supports activation of compressed mode only in the downlink. - UL_DL_BOTH: The NodeB supports activation of compressed mode in both uplink and downlink. Bit Field Type
CM type of the cell. WALKING_SPEED_AND _HOT_SPOT_CELL,MID_ SPEED_AND_HOT_SPOT _CELL,HIGH_SPEED_AN D_HOT_SPOT_CELL,LO W_SPEED_AND_MEDIU M_COVERAGE_CELL,HI GH_SPEED_AND_MEDI UM_COVERAGE_CELL, LOW_SPEED_AND_HIG H_COVERAGE_CELL,HI GH_SPEED_AND_HIGH_ COVERAGE_CELL,PICO _NODEB_TYPE_COVER AGE_CELL,OTHER_CEL L The CMCF parameters are configured on the basis of the CM type of the cell. After that, the cell can specify the number of CM Enumeration Type sequences.
CMCF algorithm switch. 1) CMCF_DL_HLS_SWITCH : When the switch is on, the compressed mode supports DL higher-layer scheduling. 2) CMCF_UL_HLS_SWITCH : When the switch is on, the compressed mode supports UL higher-layer scheduling. 3) CMCF_UL_PRECFG_TO LERANCE_SWITCH: When the switch is on, the compressed mode of the UE in the compressed mode preconfiguration state can be different from that required by current traffic. 4) CMCF_WITHOUT_UE_C AP_REPORT_SWITCH: When the RNC starts interfrequency or inter-RAT measurement, the RNC checks the information of whether the compressed mode is required for measurement on the frequency band of the cells in measurement list. The information should be Bit Field Type CMCF_DL_HLS_SWITCH, CMCF_DL_HLS_SWITCH, CMCF_UL_HLS_SWITC CMCF_UL_HLS_SWITCH, CMCF_UL_PRECFG_TO reported by the UE in RRC A timer to SRNC wait for theInterval Type response to common transport channel resources request in the Iur common transport channel procedure. 1~10000 1~10000
Compatibility switch. 1) CMP_IU_IMS_PROC_AS _NORMAL_PS_SWITCH: When the switch is on, the IMS signaling assigned by the CN undergoes compatibility processing as an ordinary PS service. When the switch is not on, no special processing is performed. 2) CMP_IU_SYSHOIN_CMP _IUUP_FIXTO1_SWITCH : When the switch is on, the IUUP version can be rolled back to R99 when complete configurations are applied during inter-RAT handover. 3) CMP_IUR_H2D_FOR_LO WR5_NRNCCELL_SWIT CH: When the switch is on, H2D is performed before a neighboring RNC cell whose version is earlier than R5 is added to the active set; E2D is performed before a neighboring RNC cell whose version is earlier than R6 is added to the Bit Field Type active set. If the DRNC is
Identifying a CN node. Interval Type 0~4095 0~4095 The status of the CN node. Enumeration Type NORMAL, OFFLOAD, INHIBITED NORMAL,OFFLOAD,INHIBITED Mode of resource management. When the interface type isSHARE,value of this parameter could be SHARE or EXCLUSIVE mode. When the i Enumeration Type Iub, the EXCLUSIVE SHARE, EXCLUSIVE This parameter specifies the index of Type Interval an operator. 0~3 0 to 3 Uniquely identifying Cn operator name. String Type 1~31 characters Identify a Operator Group. Interval Type 0~31 0~31
This parameter specifies the index of Type Interval the operator group that serves the cell. 0~31 Uniquely identifying Cn operator name. String Type Indicating a Cn Operator. Interval Type 0~3,5~31
Cn Operator index. Interval Type 0~3 0~3 Cn Operator 1 index. Interval Type 0~3,5~31 0~3,5~31 Cn Operator 2 index. Interval Type 0~3,5~31 0~3,5~31 Cn Operator 3 index. Interval Type 0~3,5~31 0~3,5~31 Cn Operator 4 index. Interval Type 0~3,5~31 0~3,5~31 Common Operator Index. Interval Type 5~31,255 5~31,255 Identify operator number in operator groupType is not belong to the common operator 1,2,3,4 Enumeration which ONE(One), TWO(Two), THREE(Three), FOUR(Four) number. CN protocol version. Enumeration Type R99, R4, R5, R6, R7 R99,R4,R5,R6,R7 Code reshuffle switch based on H. If the switch is enabled,OFF(OFF), ON(ON) R99 service is adjusted toward codes with small numbers. Whe Enumeration Type code occupied by the To enlarge the throughout of HSDPA when the NodeB a H-based code tree reshuffle user number threshold. When the switch is enabled, if the number of users on the tree to be reshuffled is no greater t Interval Type 1~16 1~16
This parameter specifies one Interval Type conditions of code balancing DRD. (The other condition is the minimum spreading factor.) This c of the triggering 0~100 0~100
This parameter specifies one Enumeration Type of the triggering conditions of code balancing SF32, SF64,other SF8, SF16, SF32, SF64, SF128, SF256 condition re SF4, SF8, SF16, DRD. (The SF4, condition is the code occupancy.) This SF128, SF256 This parameter specifies whether the code balancing DRD algorithm will be applied. - ON: The code balancing DRD algorithm will be applied. - OFF: The code balancing DRD algorithm will not be applied. Enumeration Type ON, OFF ON, OFF This switch is valid only when the inter-frequency handover switch is enabled. TRUE means that inter-frequency handover is selected in code re Enumeration Type FALSE(FALSE), TRUE(TRUE) FALSE, TRUE The message code scheme. Enumeration Type GERMAN(German), ENGLISH(English), ITALIAN(Italian), FRENCH(French), SPA GERMAN, ENGLISH, ITALIAN, FRENCH, SPANISH
Type of event 2D/2F measurement thresholds when inter-frequency and inter-RAT measurements coexist. COEXIST_MEAS_THD_C HOICE_INTERFREQ: choosing the interfrequency oriented parameters as event 2D/2F measurement thresholds for inter-frequency measurement. COEXIST_MEAS_THD_C HOICE_INTERRAT: choosing the inter-RAT oriented parameters as event 2D/2F measurement thresholds for inter-RAT measurement. When you set the previous parameters, consider the following factors: event 2D/2F measurement thresholds for interfrequency measurement, inter-frequency and interRAT handover decision thresholds, and current handover policy. For example, if the event 2D threshold for inter-RAT measurement is higher than Enumeration Type COEXIST_MEAS_THD_CHOICE_INTERFREQ(Choosing the inter-frequency orie COEXIST_MEAS_THD_CHOICE_INTERFREQ,COE that for inter-frequency For a PTM service, if the ratio of the intra-frequency cells 0~100 the service is transmitted in PTM mode to the intra-frequency cells of a cell rea Interval Type where 0~1,step: 0.01
The ralative power margin of Interval Type combined traffics, used to calculate the triggering threshold of event F, can avoid the fluctuation of traffic rate in c 0~100 0~10, step: 0.1 This parameter determines whether Common PLMN ID is NON-SUPPORTING_UE_ONLY(Non-Supporting UEthe CN.BOTH(Both), NEITH Enumeration Type used when the RNC sends the INIT UE MESSAGE to Only), NON-SUPPORTING_UE_ONLY,BOTH,NEITHER Timer T1.Interval between failure of initial alignment and 1~7 Interval Type origination of next initial alignment. 1~7 Timer T2.Total time SSCF will attempt alignment. Interval Type 30~90 30~90 Timer T3.Time between proving PDUs. Interval Type 10~200 10~200 The port flow control is disabled when the buffer duration 10~150 0 is smaller than or equal 150 value of this parameter. When the port flow Interval Type of queue 10 to to the The port flow control is disabled when the buffer duration 10~150 1 is smaller than or equal 150 value of this parameter. When the port flow Interval Type of queue 10 to to the The port flow control is disabled when the buffer duration 10~150 2 is smaller than or equal 150 value of this parameter. When the port flow Interval Type of queue 10 to to the The port flow control is disabled when the buffer duration 10~150 3 is smaller than or equal 150 value of this parameter. When the port flow Interval Type of queue 10 to to the
The port flow control is disabled when the buffer duration 10~150 4 is smaller than or equal 150 value of this parameter. When the port flow Interval Type of queue 10 to to the
The port flow control is disabled when the buffer duration 10~150 5 is smaller than or equal 150 value of this parameter. Interval Type of queue 10 to to the The port flow control is enabled whenTypebuffer duration of queue 0 is larger than or equalto 150 value of this parameter. When the port flow co Interval the 10~150 10 to the The port flow control is enabled whenTypebuffer duration of queue 1 is larger than or equalto 150 value of this parameter. When the port flow co Interval the 10~150 10 to the The port flow control is enabled whenTypebuffer duration of queue 2 is larger than or equalto 150 value of this parameter. When the port flow co Interval the 10~150 10 to the The port flow control is enabled whenTypebuffer duration of queue 3 is larger than or equalto 150 value of this parameter. When the port flow co Interval the 10~150 10 to the
The port flow control is enabled whenTypebuffer duration of queue 4 is larger than or equalto 150 value of this parameter. When the port flow co Interval the 10~150 10 to the
The port flow control is enabled whenTypebuffer duration of queue 5 is larger than or equalto 150 value of this parameter. Interval the 10~150 10 to the Indicating whether the UE in Enumeration Type allowed to access theNOT_BARRED BARRED, BARRED, it indicates that the UEs in connec connected mode is BARRED, cell. When the cell status is NOT_BARRED
This parameter specifies the RRC redirection strategy. - OFF: RRC redirection is not allowed. Only_To_Inter_Frequency: Only RRC redirection to inter-frequency cells is allowed. - Allowed_To_Inter_RAT: RRC redirection to interfrequency cells and redirection to inter-RAT cells are both allowed. Enumeration Type OFF, Only_To_Inter_Frequency, Allowed_To_Inter_RAT OFF, Only_To_Inter_Frequency, Allowed_To_Inter_RA Indicating whether the UE in Enumeration allowed to reselect another intra-frequency cell. This parameter is valid when [Cell barred indicator fo idle mode is Type ALLOWED, NOT_ALLOWED ALLOWED, NOT_ALLOWED This parameter specifies whether the added RBS is connected toNO WDMB. Enumeration Type YES, the YES,NO
The hysteresis value of the serving FDD cells in connected mode in case the quality measurement for cell selection and reselection is set to CPICH RSCP. It is related to the slow fading feature of the area where the cell is located. The greater the slow fading variance is, the greater this parameter. According to the R regulation, the current serving cell involves in cell selection after the measurement value is added with the hysteresis value. The measurement hysteresis aims to prevent the pingpong effect of the cell reselection, which is caused by the slow fading when the UE is on the edge of the cell. The ping-pong effect may trigger frequent location updates (idle mode), URA updates (URA_PCH), or cell updates (CELL_FACH, CELL_PCH), and thus increase the load of network signaling and the Interval Type consumption of UE
0~20
0~40, step:2
The hysteresis value of the serving FDD cells in connected mode in case the quality measurement for cell selection and reselection is set to CPICH Ec/No. It is related to the slow fading feature of the area where the cell is located. The greater the slow fading variance is, the greater this parameter. This parameter is not configured when its value is 255. According to the R regulation, the current serving cell involves in cell selection after the measurement value is added with the hysteresis value. The measurement hysteresis aims to prevent the pingpong effect of the cell reselection, which is caused by the slow fading when the UE is on the edge of the cell. The ping-pong effect may trigger frequent location updates (idle mode), URA updates (URA_PCH), or cell updates (CELL_FACH, CELL_PCH), and thus Interval Type increase the load of network
0~20,255
{0~40},{255}, step:2
Offset of cell CPICH RSCP measurement value in cell selection or reselection when the UE is in connected mode. This parameter is used for cell offset in cell selection and reselection. During cell reselection, the cell offset corresponding to CPICH Ec/No is QOffset2sn, that to CPICH RSCP is QOffset1sn. Idle is used for idle mode, and Conn for connected mode. ConnQoffset1sn and ConnQoffset2sn are valid only when SIB12Ind = TRUE, namely, the SIB12 message is existing. Offset of neighboring cell CPICH measurement value. This parameter is used for RSCP measurement. The offset is subtracted from the neighboring cell measurement value before cell reselection. In cell reselection algorithm, this parameter is used for moving the border of a cell. This parameter can be configured by the Interval Type Radio Network
-50~50
-50~50
Offset of cell CPICH Ec/No measurement value in cell selection or reselection when the UE is in connected mode. This parameter is used for cell offset in cell selection and reselection. During cell reselection, the cell offset corresponding to CPICH Ec/No is QOffset2sn, that to CPICH RSCP is QOffset1sn. Idle is used for idle mode, and Conn for connected mode. ConnQoffset1sn and ConnQoffset2sn are valid only when SIB12Ind = TRUE, namely, the SIB12 message is existing. Offset of neighboring cell CPICH measurement value. This parameter is used for Ec/No measurement. The offset is subtracted from the neighboring cell measurement value before cell reselection. In cell reselection algorithm, this parameter is used for moving the border of a cell. This parameter can be configured by the Interval Type -50~50 -50~50 Radio Network Threshold for inter-frequencyInterval Type in connected-16~10,127 the quality (CPICH Ec/No measured by UE) of the serving cell is lower cell reselection mode. When {-32~20},{127}, step:2 Threshold for intra-frequencyInterval Type in connected-16~10,127 the quality (CPICH Ec/No measured by the UE) of the serving cell is lo cell reselection mode. When {-32~20},{127}, step:2 This parameter is valid when Enumeration indicator for SIB4] is BARRED. ItD20(20 seconds), D40(40160, 320,can be measured next time when [Cell barred Type D10(10 seconds), indicates that 20, 40, 80, seconds),640, 1280 10, the delay of the cell D80(80 seconds), D160(160 se It is used to calculate the transmit power of the first preamble in the random access process. The formula is as follows: Preamble_Initial_Power Interval Type -35~-10 -35~-10 Context type of the Iur interface to be reset. Enumeration Type Context, Context_Group, All_Contexts Context,Context_Group,All_Contexts This parameter specifies whether to run the ping commandNO, YES Enumeration Type consecutively. NO,YES This parameter specifies the DL maximumType of conversation for PS domain user. D0, D8, D16, D32, D64, D128, D144, D256, D384 Enumeration bit rate D0, D8, D16, D32, D64, D128, D144, D256, D384 This parameter specifies the UL maximumType of conversation for PS domain user. D0, D8, D16, D32, D64, D128, D144, D256, D384 Enumeration bit rate D0, D8, D16, D32, D64, D128, D144, D256, D384 The MAC-c on Iub interface Interval Typeafter the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_F will increase 1~1000 1~1000 The MAC-c on Iub interface Interval Typeafter the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_F will increase 1~2000 1~2000
Maximum rate of the wideband AMR speech service for copper users. Enumeration Type WBAMR_BITRATE_6.60K,6.60, 8.85, 12.65, 14.25, 15.85,WBAMR_BITRATE_12 WBAMR_BITRATE_8.85K, 18.25, 19.85, 23.05, 23.8
Maximum rate of the narrowband AMR speech service forNBAMR_BITRATE_4.75K, 4.75, 5.15, 5.90, 6.70, 7.40, 7.95, 10.20, 12.20 Enumeration Type copper users. NBAMR_BITRATE_5.15K, NBAMR_BITRATE_5.90 This parameter specifies the number of sent packets. Interval Type 1~28 1 to 28 Count-C checking values. Interval Type 1024~4294967295 1024~4294967295 Counter check switch. Enumeration Type ON, OFF ON,OFF
This parameter indicates whether the closed loop TX diversity mode 1 supported. Enumeration Type CP1_Supported, CP1_not_Supported CP1_Supported, CP1_not_Supported This parameter specifies the number of subframes transmitted when theD4, D8, D16, D32, D64, D128, D256, D512, INFINITY Enumeration Type D0, D1, D2, priority of reporting CQI is higher than the priority of transmitting patte 0,1,2,4,8,16,32,64,128,256,512,INFINITY This parameter specifies the CQI feedbackType in DTX-DRXD2, D4,Currently, D20, D40, D80, D160, D16, D32, set to only D2 because the N Enumeration cycle D0, mode. D8, D10, the value of this parameter can be D64 0,2,4,8,10,20,40,80,160,16,32,64 Maximum number of cell reselection.Type parameter, along with the [Time for evaluating max cell reselection], is used for rate evaluation in HC Interval This 1~16 1~16 This field indicate whether the cross IP address is available. Enumeration Type UNAVAILABLE, AVAILABLE UNAVAILABLE, AVAILABLE R99 CS conversational service downlink factor. Interval Type 0~100 0~100
R99 CS conversational primary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF R99 CS conversational bearing primary path load threshold. Interval Type 0~100 0~100
R99 CS conversational secondary path. Type Enumeration CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF R99 CS conversational primary secondary path load ratio threshold. Interval Type 0~100 0~100 R99 CS conversational service uplinkType Interval factor. 0~100 0~100 This parameter specifies maximum CS services. Interval Type 0~61200 0 to 61200
CS domain Relocation GSM load THD. This parameter specifies the CS domain relocation GSM load threshold. When the GSM load policy is used, that is, when [NcovHoOn2GldInd] in SET INTERRATHONCOV is set to ON, the CS domain inter-system relocation out process will be stopped if the GSM system send its cell load to the RNC and the cell load exceeds the CS domain Reloc GSM load THD. Otherwise, the RNC does not stop the CS domain inter-system relocation out process. Interval Type 0~100 Indicating whether the CS domain permits Type information to update . Enumeration the CN OFF, ON Cs Information Update protection timer. Interval Type 60~900
This parameter specifies feature mode of operators in the CS domain. YouSUPP_IUFLEX, SUPP_MOCN, SUPP_IUFLEX_MOCN Enumeration Type SUPP_NONE, should configure the network resource identifier (NRI) when MOCN SUPP_NONE,SUPP_IUFLEX,SUPP_MOCN,SUPP_IU NRI length for CS domain. Interval Type 1~10 1~10
Whether to impose the accessEnumeration TypeCS domain. restriction on the FALSE, TRUE
FALSE,TRUE
Indicating whether the cell allows CS service interRAT handover. ON: CS service inter-RAT handover is enabled. OFF: CS service inter-RAT handover is disabled. Service handover refers to the handover attribute and related parameter configuration on the network side for each service. When a service is established, the related measurements and interRAT handover are immediately triggered. These two switches are enabled only for service handover; generally, they are disabled by default. Note that the service handover is enabled only when the handover attribute is set to HO_TO_GSM_SHOULD_ BE_PERFORM and CS service inter-RAT handover is set to ON. Both conditions are mandatory. For hybrid services, the service handover is not triggered. Enumeration Type R99 CS streaming service downlink factor. Interval Type
ON,OFF 0~100
R99 CS streaming primary path. Enumeration Type R99 CS streaming bearing primary path load threshold. Interval Type
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF 0~100 0~100
R99 CS streaming secondary Enumeration Type path. CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF R99 CS streaming primary secondaryType load ratio threshold. Interval path 0~100 0~100 R99 CS streaming service uplink factor. Interval Type 0~100 0~100 CS algorithm switch. 1) CS_AMRC_SWITCH: When the switch is on and the AMRC license is activated, the AMR control function is enabled for AMR services. 2) CS_HANDOVER_TO_UT RAN_DEFAULT_CFG_S WITCH: When the switch is on, the default configurations of signaling and RABs, which are stipulated in 3GPP 25.331, are used for relocation of the UE from GSM to WCDMA. When the switch is not on, the default configurations are not used. Instead, the complete information of RB, TrCH, and PhyCH, which are in the HANDOVER TO UTRAN COMMAND message is used. 3) CS_IUUP_V2_SUPPORT_ SWITCH: When the switch is on and the "Support IUUP Version 2" license is activated, the RNC supports the TFO/TRFO function. Bit Field Type CS_AMRC_SWITCH, CS_HANDOVER_TO_UTRAN_DEFAULT_CFG_SWITCH CS_AMRC_SWITCH, CS_HANDOVER_TO_UTRAN 4)
Indicating the channel type of CS speech service. -DCH: Both uplink and downlink are beared on DCH. -HSPA:Uplink is beared on E-DCH, downlink beared on HS-DSCH. Enumeration Type DCH(UL_DCH,DL_DCH), HSPA(UL_EDCH,DL_HSDSCH) DCH,HSPA This parameter specifies the relative delay for jitter correction of the CS traffic over the -100~100 HSPA channel. This parameter indicates the m Interval Type -100~100 downlink This parameter specifies the relative delay for jitter correction of the CS traffic over the -100~100 Interval Type -100~100 uplink HSPA channel. The CS data is buffered on the P This parameter specifies the TTI type usedType servicesEDCH_TTI_10ms, EDCH_TTI_2ms Enumeration for CS over the uplink HSPA channel. EDCH_TTI_10ms, EDCH_TTI_2ms Indicating whether to supportEnumeration Type the neighboringON CS over HSPA of OFF, RNC. OFF, ON
Uniquely identifying a TFC on the SCCPCH. The specific0~16777215 Interval Type parameter value depends on the CTFC Size (2 bits: 0~3, 4 bits: 0~15, 6 bits: 0~63, 8 0~16777215
Calculated TFC (CTFC) length of the Transport Format Combination Set (TFCS) onBIT12, BIT16, This parameter value is related to the maxim Enumeration Type BIT2, BIT4, BIT6, BIT8, the SCCPCH. BIT24 2, 4, 6, 8, 12, 16, 24 The sharing offset should be added toType Interval the target subrack or1~10 subsystem. This parameter is used for preferable selection of the homing subrack and 0.01~0.1, step:0.01 Forwarding threshold of control planeType sharing. When 0~100 usage is between the sharing threshold and overload threshold, and call num Interval load the CPU 0~1, step:0.01 Number of the MPU slot. Interval Type 0,2,4,8,10 0, 2, 4, 8, 10 This parameter specifies whether to support the configuration rollback function. Enumeration Type ON, OFF ON,OFF This parameter specifies the type of VPL/VCL cross connection. VCLCX Enumeration Type VPLCX, VPLCX, VCLCX Uniquely identifying a classified zone. The value of Classified Zone ID is denoted by decimal numerals. Interval Type 0~4799 0~4799
This parameter is used to check whether the UE in the lowD8, D16, D32,If the UE is on8, 16,D512, D1024,low activity D4k, D6k, 4k, 6k, by 112 Enumeration Type activity state. D64, D128, D256, 32, 64, 128, 256, 512, 1024, 2k, 3k, D8k, D12k, ev DCH channel, the D2k, D3k, counter increases 8k, D Pending time after the traffic Enumeration Type reported.D250,parameter is used to prevent 500,many traffic volume8000, 16000 volume event 4B is This D500, D1000, D2000, 250, too D8000, 2000, 4000, events 4B being reported. D4000, 1000, D16000 When the traffic volume is below the 4B threshold and remains so for the D40, D60, D80, 10, thisD120, D160, D200, D240,200, 240, 320,D128 Enumeration Type D0, D10, D20, period specified D100, 40, 60, 80, 100,event 4B is D320, D640, 640, 0, by 20, parameter, the 120, 160, reported. This para After the 1A measurement report is received, the rate is reduced to the threshold rate for1~255 Interval Type 1~255 soft handover and the timer specified by this parameter
This parameter defines the length of penalty timer for SHO failure after rate reduction in the active set. When the rate reduction in the active set is performed which triggers the increase of SHOs in the target cell, if the target cell fails to join the active again, the RNC starts the penalty timer for SHO failure. This parameter defines the length of the penalty timer. Before the timer expires, the rate increasing in the active set is prohibited, but rate reduction is not prohibited. Such penalty strategy is applied in the following scenario: If there is a cell, for some reason, it has high signal strength but heavy load, and cannot join the active set throughout by then. This cell may enter the SHO rate reduction evaluation process repeatedly, which results in rate reduction in the active set. If the cell fails to join the active set, Interval Type 0~255 0~255 the rate in the active set Strategy for adjustment of the rate of the PS BE service when the UE is in the CELL_DCH state. RATE_UP_AND_DOWN_ON_DCH indicate Enumeration Type RATE_UP_AND_DOWN_ON_DCH, RATE_UP_ONLY_ON_DCH RATE_UP_AND_DOWN_ON_DCH, RATE_UP_ONL Length of the penalty period within which the rate of a BE 1~65535 Interval Type service cannot be increased even if the 4A measurement report is received. Increase o 1~65535 This parameter specifies the period ofType throughput ratio measurement.Macd performs statistic step: 10 volume on DCH and reports 4B eve Interval DCH 1~1000 10~10000, of traffic This parameter specifies the number of measurement periods during which no event 4B 0~1023 to DCH throughput is reported again after such a Interval Type 0~1023 related This parameter specifies the number of measurement periods from the moment when the DCH rate falls below the 4B threshold to the moment w Interval Type 0~1023 0~1023 This parameter specifies the subnet number of the internal 1~126,128~223 Interval Type debugging IP address of the RNC. 1 to 126,128 to 223 This parameter specifies the default operator that RNC chooses in the MOCN cell. The 0~3,255 means that no default operator is defined. Interval Type 0~3,255 value 255
This parameter specifies the constant that is used by the RNC to compute the DPCCH_Power_Offset which is further used by the UE to calculate the UL DPCCH_Initial_Power during the open-loop power control. The formulas are as follows: DPCCH_Power_Offset = Primary CPICH DL TX power + UL interference + Default Constant Value DPCCH_Initial_Power = DPCCH_Power_Offset CPICH_RSCP where DPCCH_Power_Offset is the DPCCH initial transmit (TX) power offset, Primary CPICH DL TX power is the downlink TX power of PCPICH, and CPICH_RSCP is the received signal code power of the P-CPICH measured by the UE. A small value of DPCCH_Power_Offset might lead to uplink synchronization failure at cell edges during link setup, thus affecting the uplink Interval Type -35~-10 -35~-10 coverage. A large value of When the RNC is performingInterval Type power control, it evaluates link consumption according to the PCPICH TX power and the PCPICH downlink open -30~30 -30~30 This parameter specifies the delay time. When the RNC recovers from disaster and starts to operate, it performs re-host policy for the primary ho Interval Type 0~3600 0~3600
This parameter specifies the maximum delay difference between different IMA links in 4 toIMA group. to 255(AOUa) Interval Type 4~255 an 100(AEUa),4
This parameter specifies the delay class. According to the specification, a maximum of five delay classes, that is, class 1 to class 5, are available Interval Type 1~5 1~5 This parameter specifies the threshold of code occupancy offset between the current cell and the target cell when code balancing DRD is applied Interval Type 0~100 0~100
Actual minimum required RX level = Type Interval minimum required RX level + extended minimum required RX level. For details, refer to the 3GPP TS 25 -2~-1 -4~-2,step:2
M3UA destination entity indexes and Type destination entity have a one-to-one correspondence. Interval M3UA 0~118 0~118 This parameter specifies the destination IP address. IP Address Type 0.0.0.0~255.255.255.255 This parameter specifies a destination IP Type IP Address address. 0.0.0.0~255.255.255.255 This parameter specifies the ID of a remote MEP. Interval Type 1~100 1 to 100 This parameter specifies an MEP in an MA. Interval Type 1~100 1 to 100 This parameter specifies the period ofType Interval reporting the DGPS 1~60 data. 1 to 60 This parameter specifies the direction that the traffic volume measurement is applicable to. - DOWNLINK: indicates downlink traffic volume measurement. - UPLINK: indicates uplink traffic volume measurement or E-DCH throughput measurement. Enumeration Type
UPLINK, DOWNLINK
UPLINK, DOWNLINK
There are two combination methods for uplink combination of soft handover: one is maximum ratio combination at the NodeB Rake receiver, which gives the highest combination gain; the other is selective combination at the RNC, which gives a relatively smaller combination gain. The default value of the indication switch is MAY, which means the NodeB decides whether to implement maximum ratio combination according to its own physical conditions; when MUST is selected, the NodeB is forced to carry out maximum ratio combination which is usually used in tests; when MUST_NOT is selected, the NodeB is forbidden to carry out maximum ratio combination. Consider the working status (test/normal operation) and the propagation environment when deciding whether to implement softer Enumeration Type MAY(NodeB chooses whether combine at NodeB), MUST(Must combine at NodeB) MAY, MUST, MUST_NOT combination and to adopt DL activity factor of the R99 Interval Type AMR conversational service.0~100 0~1, step: 0.01
Duration from when the AMR TX power is beyond the threshold Ea or below the threshold Eb to when the event Ea or Eb is triggered. This para Interval Type 1~6000 10~60000, step: 10 DL activity factor of the R99 Interval Type background service. 0~100 0~1, step: 0.01
L3 filtering coefficient. The larger the value of this parameter, D1, stronger the smoothing effect D2, D3, higher the anti-slow-fading capability, b Enumeration Type D0, the D2, D3, D4, D5, D6,D0, D1, and the D4, D5,D15, D7, D8, D9, D11, D13, D D7, D8, D9, D11, D13, D6, D17, D19 This parameter specifies the DL initial access rate used when HSDPA BED64, D128, D144, the DCH. Enumeration Type D8, D16, D32, services switch 16,D256, D384 144, 256, 384 8, to 32, 64, 128,
This parameter specifies the default rate threshold for decision D16 DCH to carry DL 8, 16 Enumeration Type D8, to use PS domain background/interactive services. If the FRC p DL BE traffic Initial bit rate. Enumeration Type When DCCC function is enabled,D16,downlink initial bitD144, D256,set to this value if the downlink max bit rate i D8, the D32, D64, D128, rate will be D384 8,16,32,64,128,144,256,384 This parameter specifies the default rate threshold for decision D16, D32, D64, D128, D144, D256, D384, 144, 256, 384, 768, 1024, 1536, 1800 Enumeration Type D8, to use HS-DSCH to carry DL PS domain background/interactive services. When 8, 16, 32, 64, 128, D768, D1024, D1536, D1800, D2048
Duration from when the BE TX power is beyond the threshold Ea to when the event Ea 10~60000, step: 10 when the BE TX power is below the Interval Type 1~6000 is triggered or from
Duration within which the measured power being lower than the threshold is allowed for BE service. This parameter is used to avoid faulty repo Interval Type 1~6000 10~60000, step: 10
Length of smoothing filter window ofType Interval downlink CAC. 1~32 1~32 Different admission policies are used Type Interval for dedicated channel and common channel users.0~1, common channel users, resources instead of separat 0~100 For step:0.01
Admission threshold of the total cell downlink power. If the value is too high, too many 0~1, step:0.01 Interval Type 0~100 users will be admitted. However, the throughput of a sin This parameter specifies the compression method that the NodeB supports in the downlink. - SF/2: SF reduction by two HIGHER_LAYER_SCHD L: higher layer scheduling If both SF/2 and HIGHER_LAYER_SCHD L are selected, the NodeB supports both of the compression methods in the downlink. Bit Field Type
Number of the DL code to beInterval Type details, refer to0~255 reserved. For the 3GPP TS 25.213 protocol. 0~255
The percentage of the conversational AMR service threshold to the 100% downlink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the AMR service admission. That is, when an AMR service is accessing, the RNC evalutates the measurement value of the downlink load after the service is accessed. If the DL load of a cell is higher than this threshold after the access of an AMR speech service, this service will be rejected. If the DL load of a cell will not be higher than this threshold, this service will be admitted. The DL load factor thresholds include parameters of [DL threshold of Conv non_AMR service], [DL handover access threshold] and [DL threshold of other services]. The four parameters can be used to limit the proportion between Interval Type the conversational service,
0~100
0~1, step:0.01
The percentage of the conversational non-AMR service threshold to the 100% downlink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the non-AMR service admission. That is, when a non-AMR service is accessing, the RNC evalutates the measurement value of the downlink load after the service is accessed. If the DL load of a cell is higher than this threshold after the access of a non-AMR speech service, this service will be rejected. If the DL load of a cell will not be higher than this threshold, this service will be admitted. The DL load factor thresholds include parameters of [DL threshold of Conv non_AMR service], [DL handover access threshold] and [DL threshold of other services]. The four parameters can be used to limit the proportion between Interval Type the conversational service,
0~100
0~1, step:0.01
Number of users selected in aInterval Type domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter are the CS d DL LDR CS 1~10 1~10
Number of users selected in aInterval Type domain inter-RAT SHOULDNOTBE load handover. The target subscribers of this parameter are the DL LDR CS 1~10 1~10
For a BE service that has a low maximum rate, the DCCC D8, D16, D32, D64, D128,effective32, 64, 128, 144, 256, 384 processing. Thus, the tr Enumeration Type algorithm is not obviously D144, D256, D384 8, 16, yet it increases algorithm
Maximum DL rate during network planning when coverage of D16, D32,cell is ensured.8, 16,D256, D384 144, 256, 384 current rate is reduced Enumeration Type D8, the entire D64, D128, D144, 32, 64, 128, is limited, the When the DL TCP
This parameter specifies the DL GBR of the BE service. D0, D8, D16, D32, D64, D128, 8, 16, 32, 64, 128, 144, 256, 384 Enumeration Type 0, D144, D256, D384
Some cell resources can be reserved for handover UEs to guarantee handover success rate andSF32(SF32), SF64(SF64), SF128(SF128), SF256( Enumeration Type SF4(SF4), SF8(SF8), SF16(SF16), improve access priority of handover services. Thi SF4,SF8,SF16,SF32,SF64,SF128,SF256,SFOFF
The percentage of the handover service admission threshold to the 100% downlink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the handover admission. That is, when a service is handing over to a cell, the RNC evalutates the measurement value of the downlink load after the service is accessed. If the DL load of a cell is higher than this threshold after the access, this service will be rejected. If the DL load of a cell will not be higher than this threshold, this service will be admitted. The DL load factor thresholds include parameters of [DL threshold of Conv non_AMR service], [DL handover access threshold] and [DL threshold of other services]. The four parameters can be used to limit the proportion between the non-handover service, handover user and other Interval Type 0~100 0~1, step:0.01 services in a specific cell, Reserved DL power factor for HSUPA user. The higher the value is, the more resources0~1, step:0.01 HSUPA control channel, which leads to Interval Type 0~100 reserved for the DL activity factor of the R99 Interval Type interactive service. 0~100 0~1, step: 0.01 The UE can be selected to process load handover only when its bandwidth is less than this threshold. The higher the parameter is, the higher the Interval Type 0~400000 0~400000 The inter-frequency neighboring cell Type be selected as 0~100 Interval could the destination of load handover only when its load remaining space is larger than this 0~1, step:0.01 The mechanism of the LDR is that anType is performed in each [LDR period] and some services are selected based on the action rules to perfo Interval action 1~10 1~10 Length of smoothing filter window ofType Interval downlink LDR. 1~32 1~32
Number of RABs selected in Interval Type traffic rate reduction. In the actual system, this parameter can be set on the basis of the actual circum a DL LDR BE 1~10 1~10
Reserved SF threshold in downlink credit LDR. The downlink credit LDR couldSF16(SF16), only when theSF64(SF64), SF128(SF128),the down Enumeration Type SF4(SF4), SF8(SF8), be triggered SF32(SF32), SF factor corresponding to SF256( SF4,SF8,SF16,SF32,SF64,SF128,SF256 This parameter has the same content as DlLdrFirstAction. NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff ra Enumeration Type The selected actions, however, should be unique. NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInte
This parameter has the same content as DlLdrFirstAction. NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff ra Enumeration Type The selected actions, however, should be unique. NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInte
NOACT: No load reshuffling action is taken. INTERFREQLDHO: The inter-frequency load handover is performed. BERATERED: Channels are reconfigured for the BE service. QOSRENEGO: The renegotiation on the QoS of the uncontrollable real-time service is performed. CSINTERRATSHOULDB ELDHO: The inter-RAT SHOULDBE load handover of the CS domain is performed. PSINTERRATSHOULDB ELDHO: The inter-RAT SHOULDBE load handover of the PS domain is performed. AMRRATERED (AMR service rate decreasing): The setting of the TFC subset and the negotiation of the service rate can be performed for the AMR voice service. MBMSDECPOWER (MBMS power limiting): The MBMS service is configured with the Enumeration Type minimum power.
This parameter has the same content as DlLdrFirstAction. NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff ra Enumeration Type The selected actions, however, should be unique. NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInte This parameter has the same content as DlLdrFirstAction. NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff ra Enumeration Type The selected actions, however, should be unique. NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInte
Number of RABs selected in Interval Type a DL LDR uncontrolled real-time traffic QoS renegotiation. The target subscribers of this parameter are the PS dom 1~10 1~10
If the ratio of DL load of the cell to the downlink capacity 0~100 than this threshold, the DL load reshuffling function of the cell is stopped. Af Interval Type is lower 0~1, step:0.01
This parameter has the same content as DlLdrFirstAction. NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff ra Enumeration Type The selected actions, however, should be unique. NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInte This parameter has the same content as DlLdrFirstAction. NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff ra Enumeration Type The selected actions, however, should be unique. NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInte
This parameter has the same content as DlLdrFirstAction. NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff ra Enumeration Type The selected actions, however, should be unique. NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInte This parameter has the same content as DlLdrFirstAction. NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff ra Enumeration Type The selected actions, however, should be unique. NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInte
This parameter has the same content as DlLdrFirstAction. NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff ra Enumeration Type The selected actions, however, should be unique. NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInte
If the ratio of DL load of the cell to the downlink capacity 0~100lower than this threshold, the DL load reshuffling function of the cell is triggere Interval Type is not 0~1, step:0.01 If the DL load state of the cell is lasted longer than this threshold, the DL load state of the cell transfers. Interval Type 10~600000 10~600000 This parameter specifies the maximum number of TFCs (Transport Format D64, D96, D128, D256,64, 96, 128, 256, 512, 1024the value of this p Enumeration Type D16, D32, D48, Combination) allowed inD512, D1024 The larger 16, 32, 48, the downlink. Reserved DL power factor for MBMS service. Interval Type 0~100 0~1, step:0.01
Smooth filtering coefficient for DL measured values. The smooth filtering algorithmD6,0, 1, to avoid5,D11, D13, 11, 13, 15, D1919 Enumeration Type D0, D1, D2, D3, D4, D5, is used 2, 3, D9, random interference in17, D7, D8, 4, 6, 7, 8, 9, D15, D17, measurement repor This parameter determines whether automatic or manual mode is used for 3-step adjustment of the DL intermediate rate. Enumeration Type AUTO_CALC, HAND_APPOINT 0, 1
Threshold of the DL intermediate rate when the 3-step mode is used for DLD128, D144,16, 32, 64, 128, 144,mode 384 Enumeration Type D16, D32, D64, rate adjustment andD384 D256, the manual 256, is used for DL intermediate ra
The AMRC needs to check whether the TFO/TrFO exists before adjusting DL AMR speech rate. If the TFO/TrFO does not exist, the CN has th Interval Type 1~4294967295 1~4294967295
DL activity factor of the R99 Interval Type non AMR conversational service. 0~100 Length of smoothing filter window ofType Interval downlink OLC. DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus reducing the cell downlink load. The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs selected in executing downlink OLC fast restriction. Selection of RABs of the OLC is based on the service priorities and ARP values and bearing priority indication. The RAB of low priority is under control. In the actual system, UlOlcFTFRstrctRabNum and DlOlcFTFRstrctRabNum can be set on the basis of Interval Type the actual circumstances. If 1~32
1~10
1~10
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus reducing the cell downlink load. The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of downlink OLC fast TF restriction performed in entering/exiting the OLC status. After the overload is triggered, the RNC immediately executes OLC by first executing fast TF restriction. The internal counter is incremented by 1 with each execution. If the number of overloads does not exceed the OLC action Interval Type threshold, the system lowers
0~100
0~100
L3 filtering coefficient. The larger the value of this parameter, D1, stronger the smoothing effect D2, D3, higher the anti-slow-fading capability, b Enumeration Type D0, the D2, D3, D4, D5, D6,D0, D1, and the D4, D5,D15, D7, D8, D9, D11, D13, D D7, D8, D9, D11, D13, D6, D17, D19
If the ratio of DL load of the cell to the downlink capacity 0~100 than this threshold, the DL overload and congestion control function of the ce Interval Type is lower 0~1, step:0.01
User release is an extreme method in reducing the cell load and recovering the system when the cell is overloaded and congested. The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs released in executing downlink OLC service release. For the users of a single service, the releasing of RABs means the complete releasing of the users. The releasing of RABs causes call drops, so UlOlcFTFRstrctTimes or DlOlcFTFRstrctTimes should be set to a low value. Higher values of the parameter get the cell load to decrease more obviously, but the QoS will be affected.
Interval Type
0~10 1~6000
If the ratio of DL load of the cell to the downlink capacity 0~100lower than this threshold, the DL overload and congestion control function of th Interval Type is not 0~1, step:0.01
The percentage of other service thresholds to the 100% downlink load. The services refer to other admissions except the conversational AMR service, conversational nonAMR service, and handover scenarios. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling other service admissions. That is, when a service is accessing, the RNC evalutates the measurement value of the downlink load after the service is accessed. If the DL load of a cell is higher than this threshold after the access of a service, this service will be rejected. If the DL load of a cell will not be higher than this threshold, this service will be admitted. The DL load factor thresholds include parameters of [DL threshold of Conv non_AMR service], [DL handover access threshold] and [DL threshold of other Interval Type services]. The four
0~100
0~1, step:0.01
Orthogonal Variable Spreading Factor (OVSF) of the DL code to be reserved. For SF64,SF4,SF8,SF16,SF32,SF64,SF128,SF256 Enumeration Type SF4, SF8, SF16, SF32, details, refer to the 3GPP TS 25.213 protocol. SF128, SF256
Number of users selected in aInterval Type domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter are the PS d DL LDR PS 1~10 1~10
Number of users selected in aInterval Type domain inter-RAT SHOULDNOTBE load handover. The target subscribers of this parameter are the DL LDR PS 1~10 1~10 Rate adjustment switch of link stability control for DL QoS of AMR services. When theNO, YES is set to YES, DL rate of AMR services can b Enumeration Type NO, YES parameter Inter-frequency handover switch of link stability control for DLYES of AMR services. When the parameter is set to YES, inter-frequency hando Enumeration Type NO, QoS NO, YES Inter-RAT handover switch of link stability control for DLNO, YES Enumeration Type QoS of AMR services. When the YES NO, parameter is set to YES, inter-RAT handover can b
Timer length for downlink Qos measurement. This parameter controls the time lengths for the interfrequency and inter-RAT measurement based on Qos. After inter-frequency or inter-RAT measurement starts, if no inter-frequency handover is performed when this timer expires, the measurement is stopped, and the compressed mode is deactivated, if any. If this parameter is set to 0, this indicates that the timer will not be started. For the inter-frequency or inter-RAT measurement based on coverage, the compressed mode can be stopped through reporting event 2F. For measurement that is not based on coverage, event 2F is not reported, and the timer must be set but should not be set to 0. As for the impact on network performance: It reduces the influence of long time compressed mode to the serving cell. Interval Type 0~512 0~512 The compressed mode may Inter-frequency handover switch of link stability control for DLYES of VP services. When the parameter is set to YES, inter-frequency handove Enumeration Type NO, QoS NO, YES Rate adjustment switch of link stability control for DL QoS of WAMR services. When the parameter is set to YES, DL rate of WAMR services Enumeration Type NO, YES NO, YES Inter-frequency handover switch of link stability control for DLYES of WAMR services. When the parameter is set to YES, inter-frequency han Enumeration Type NO, QoS NO, YES Inter-RAT handover switch of link stability control for DLNO, YES Enumeration Type QoS of WAMR services. When the parameter is set to YES, inter-RAT handover can NO, YES When the switch is on, the congestion detection and control for DL R99 service is R99 congestion control is off), ON(The switch of DL R99 con Enumeration Type OFF(The switch of DL supported. OFF,ON This parameter determines whether the DLType is lowered 2_Rates, 3_Rates Enumeration rate to the minimum rate in one step or two3_Rates BE service set up on DCH in downli 2_Rates, steps for This parameter determines whether the DLType is raised to2_Rates, 3_Rates in one step or two steps for BE service set up on DCH in downlink Enumeration rate the maximum rate 2_Rates, 3_Rates
Frequency hysteresis of downlink RSCP Qos. This parameter controls the used frequency thresholds for the inter-frequency and inter-RAT measurement based on Qos. In event mode, if the interfrequency and inter-RAT measurement events occurred for the downlink Qos reason, the used frequency threshold of the RSCP measurement quantity is equal to the used frequency threshold that is configured on the BAM server in coverage measurement plus this parameter. As for the impact on network performance: The larger the value of the parameter is, the more easily event 2B, interfrequency handover based on Qos, and event 3A, interRAT handover based on Qos, can be triggered, and thus the more timely the handover to the target cell can be performed.
Interval Type -15~15 -15~15 This parameter refers to the downlink spreading factor used by the RL carrying single serviceSF8, SF16, SF32, SF64, typical environment. The d Enumeration Type D4(SF4), D8(SF8), D16(SF16), D32(SF32),CN domain in SF128, SF256, SF512 SF4, with the D64(SF64), D128(SF128), D256(SF256 This parameter determines whether the compressed mode is limited to the downlink SF.FALSE,TRUE Enumeration Type FALSE(Not Limited), TRUE(Limited)the compressed mode is resource consuming fo Starting
CM implementation approach selection basis. When the downlink spreading factor is greater than or equal to this parameter value, the SF/2 approach will be preferred. Otherwise, the high-layer scheduling will be preferred. The SF/2 approach consumes more system resources and therefore this approach is recommended only for low-rate users. The high-layer scheduling requires variable multiplexing positions of transport channels and is applicable to a relatively narrow range. In addition, this approach affects the transmission rate of users and therefore is recommended only when the SF/2 approach is unavailable or there are high-rate users.
Enumeration Type D8, D16, D32, D64, D128, D256 8,16,32,64,128,256 DL activity factor of SRB. Interval Type 0~100 0~1, step: 0.01 DL activity factor of the R99 Interval Type streaming service. 0~100 0~1, step: 0.01 This parameter specifies the default rate threshold for decision D16, D32, D64, D128, D144, D256, D384 144, 256, 384 Enumeration Type D8, to use HS-DSCH to carry DL PS domain streaming services. When the maximum 8, 16, 32, 64, 128,
Threshold E1 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. 0.1 the value calculated on the basis of t Interval Type 0~559 0~55.9, step: When
Threshold E2 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. 0.1 the value calculated on the basis of t Interval Type 0~559 0~55.9, step: When
Threshold F1 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. When the value calculated on the basis of t Interval Type 1~560 0.1~56, step: 0.1
Threshold F2 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. When the value calculated on the basis of t Interval Type 1~560 0.1~56, step: 0.1 When the algorithm 2 is used, this parameter defines the total equivalent user number corresponding to the 100% downlink load. he parameter s Interval Type 1~200 1~200
Duration from when the VP TX power is beyond the threshold Ea or below the threshold Eb to when the 10 Interval Type 1~6000 10~60000, step: event Ea or Eb is triggered. This param
This parameter specifies the expectedTypedelay guard-band. (Unit: cells) Interval diff 3~505 3~505 This parameter specifies the blocked domain type. Enumeration Type PsBlk(BLOCK PS), CsAndPsBlk(BLOCK CS AND PS) PsBlk, CsAndPsBlk This parameter specifies whether the alarmType Enumeration reporting for door access is enabled. CLOSE(Close), OPEN(Open) CLOSE,OPEN The DSP code must be input Interval Type format and cannot be 0. It is unique in the SS7 network. The number of the DSP code bits is equal in hexadecimal 1~16777215 1~16777215 This parameter specifies the number of consecutive subframes D2, D5 be transmitted on the UL DPCCH during one DtxCycle1. For details, ref Enumeration Type D1, that can 1,2,5 This parameter specifies the number of consecutive subframes D2, D5 be transmitted on the UL DPCCH during one DtxCycle2. For details, ref Enumeration Type D1, that can 1,2,5 This parameter specifies whether the DPCCH slot format 1 or DPCCH slot format 4 is used when all the traffic and signaling are transmitted ov Enumeration Type SLOT_FORMAT_1, SLOT_FORMAT_4 SLOT_FORMAT_1, SLOT_FORMAT_4 The DSP code must be input String Type in divided number format. In -addition, it should be allocated in the SS7 network and cannot be repeated. 1~11 characters
This parameter indicates DPCH diversity mode for MIMONone, STTD, CP1 Enumeration Type user.
This parameter indicates the TX diversity preferably selected by DPCH. CP1 Enumeration Type None, STTD, This parameter specifies the DL power control mode. - SINGLE_TPC, a fast power control mode, indicates that a unique TPC command is sent in each timeslot on the DPCCH. TPC_TRIPLET_IN_SOFT, a slow power control mode, indicates that the same TPC command is sent over three timeslots. It is applicable to soft handover, and it can decrease the power deviation. - TPC_AUTO_ADJUST, an automatic adjustment mode, indicates that the value of DPC_MODE can be modified by sending the ACTIVE SET UPDATE message to the UE. For details of this parameter, refer to the 3GPP TS 25.214. Enumeration Type
Type of the DSP. IUCS: indicating that the DSP is on the control plane or user plane of the CS domain of the Iu interface IUPS: indicating that the DSP is on the control plane of the PS domain of the Iu interface IUR: indicating an RNC signalling point IUCS_ALCAP: indicating that the DSP is on the user plane of the CS domain of the Iu interface IUCS_RANAP: indicating that the DSP is on the control plane of the CS domain of the Iu interface STP: indicating a signalling transmission point.AAL2SWITCH:indic ating an ATM SWITCH. Enumeration Type IUCS(Iu-CS node), IUPS(Iu-PS node), IUR(Iur node), IUCS_RANAP(Iu-CS RANAP IUCS, IUPS, IUR, IUCS_RANAP, IUCS_ALCAP, AAL This parameter specifies the number of the destination port of the IP loopback test. Interval Type 1024~3584 1024 to 3584 This parameter specifies the number of the slot that holds the DPUb. Interval Type 8~19 8 to 19
Index of the DSP to be added.Uniquely identifying a DSP.0~118 Interval Type This parameter specifies the direction of activating the check on aSOURCE, BOTH Enumeration Type SINK, VCL.
Dynamic resource allocation switch. 1) DRA_AQM_SWITCH: When the switch is on, the active queue management algorithm is used for the RNC. 2) DRA_BE_EDCH_TTI_RE CFG_SWITCH: When the switch is on, the TTI could be reconfigured to HSUPA traffic dynamically between 2ms and 10ms. 3) DRA_BE_RATE_DOWN_ BF_HO_SWITCH: When the switch is on, the bandwidth for BE services is reduced before soft handover. It is recommended that the DCCC switch be on when this switch is on. 4) DRA_DCCC_SWITCH: When the switch is on, the dynamic channel reconfiguration control algorithm is used for the RNC. 5) DRA_HSDPA_DL_FLOW _CONTROL_SWITCH: Bit Field Type DRA_AQM_SWITCH, DRA_BE_EDCH_TTI_RECFG_SWITCH, DRA_BE_RATE DRA_AQM_SWITCH, DRA_BE_EDCH_TTI_RECFG When the switch is on, This parameter is used as the DRD Ec/No threshold of whether to perform the blind handover. This parameter is used as the DRD Ec/No threshold of whether to perform the blind handover. When choosing a DRD candidate cell, if the Ec/No value of the current cell is greater than the threshold of interRAT/inter-frequency neighboring cell, the DRD is permitted. -24~0 Interval Type -24~0 A timer to DRNC wait for AAL2 setup indication. Interval Type 1~10000 1~10000 A timer to DRNC wait for radio link reconfiguration commit. Interval Type 1~10000 1~10000
This parameter specifies the maximum number of inter-RAT RAB directed retries. It decides the size of the candidate set for inter-RAT DRD. T Interval Type 0~5 0~5 If the parameter is set to YES, QoS controlType BE services YES on RLC retransmissionYES be performed when the best cell is in the DRN Enumeration for DL NO, based NO, can
When the buffer duration of queue 0 is larger than or equal to the value of this parameter, packets begin to be discarded. When the port flow con Interval Type 10~150 10 to 150 When the buffer duration of queue 1 is larger than or equal to the value of this parameter, packets begin to be discarded. When the port flow con Interval Type 10~150 10 to 150 When the buffer duration of queue 2 is larger than or equal to the value of this parameter, packets begin to be discarded. When the port flow con Interval Type 10~150 10 to 150 When the buffer duration of queue 3 is larger than or equal to the value of this parameter, packets begin to be discarded. When the port flow con Interval Type 10~150 10 to 150
When the buffer duration of queue 4 is larger than or equal to the value of this parameter, packets begin to be discarded. When the port flow con Interval Type 10~150 10 to 150
When the buffer duration of queue 5 is larger than or equal to the value of this parameter, packets begin to be discarded. Interval Type 10~150 10 to 150 Direct retry switch. 1) DR_RRC_DRD_SWITCH( DRD switch for RRC connection): When the switch is on, DRD and redirection is performed for RRC connection if retry is required. 2) DR_RAB_SING_DRD_S WITCH(DRD switch for single RAB): When the switch is on, DRD is performed for single service if retry is required. 3) DR_RAB_COMB_DRD_S WITCH(DRD switch for combine RAB): When the switch is on, DRD is performed for combined services if retry is required. Bit Field Type
This parameter specifies the size of patterns (that is, the number of D8, D10, D16, D20 be received on the HS-SCCH. For details, refer to the 3G Enumeration Type D4, D5, subframes) that can 4,5,8,10,16,20 This parameter specifies the UTRAN-specific Discontinuous Reception (DRX) cycle length coefficient. In connected mode, the UE uses the shorter one between CNspecific DRX cycle length coefficient and UTRANspecific DRX cycle length coefficient. In idle mode, the UE can use the DRX mode to receive paging indications so as to reduce power consumption; in this case, the UE needs to monitor only one paging indication in one paging occasion during each DRX cycle. - If the value of this parameter is too small, the UE checks the paging channel frequently, thus having great power consumption. - If the value of this parameter is too large, the response of the UE to the paging becomes slow, and the core network may repeatedly page the UE and thus increase the downlink Interval Type 3~9 3~9 interference. CN domain specific DRX cycle length coefficient broadcast on SIB1 and used by UEs in Idle Mode. Interval Type 6~9 6~9 This parameter specifies whether the UE should monitor the transmission on the E-AGCH in the serving EDCH cell and the transmission on eac Enumeration Type TRUE, FALSE FALSE,TRUE This parameter specifies whether the parameters related toON,DRX are valid. The parameters related to the DRX are optional and they can be s Enumeration Type the OFF OFF,ON
This parameter specifies the number of the E1/T1 port bearing the PPP link. Interval Type 0~31 Whether to enable the automatically triggered DSAC algorithm. ON Enumeration Type OFF,
0 to 31 OFF,ON
This parameter specifies the DiffServType Point for the ping command. Interval Code 0~63 0 to 63 This parameter specifies the number of a DSP. Interval Type 0~21 0 to 21 This parameter specifies whether the DST Type Enumeration is used. YES, NO YES, NO This parameter specifies the destination end of timeslot cross connection, corresponding to the electrical port of the board. Interval Type 0~31 0 to 31
This parameter specifies a destination IP Type IP Address address. 0.0.0.0~255.255.255.255 This parameter specifies a subnet mask. Type IP Address 0.0.0.0~255.255.255.255 This parameter specifies the subnet mask. IP Address Type 0.0.0.0~255.255.255.255 This parameter specifies the number of theType Enumeration destination endTS1(Time_slot_1), TS2(Time_slot_2), TS3(Time_slot_3), TS4(Time_slot_4),TS10, T of timeslot cross connection.TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS5(T This parameter specifies the size of patternType Enumeration 1 transmitted on the ULD5, D8, D10, D16, D20 D1, D4, DPCCH. For details, refer to the 3GPP TS 25.331 protocol. 1,4,5,8,10,16,20 This parameter specifies the size of patternType Enumeration 2 transmitted on the ULD8, D10, D16,details, refer to the 3GPP TSD128, D160 D4, D5, DPCCH. For D20, 4,5,8,10,16,20,32,40,64,80,128,160 D32, D40, D64, D80, 25.331 protocol. This parameter specifies the delay time forType DRX being effective after D8, D16, D32,1, 2, 4,D128 32, 64, 12825.331. Enumeration DTX D0, D1, D2, D4, it is enabled. For details,16, 3GPP TS 0, D64, 8, see If the interval at which two consecutive patterns are transmitted on D15UL DPCCH is DtxCycle2, a certain number of timeslots should be transm Enumeration Type D2, D4, the 2,4,15 This parameter specifies whether the parameters related toON,DTX are valid. Value OFF indicates that the parameters are invalid and cannot be Enumeration Type the OFF OFF,ON This parameter specifies the duplex mode of the transmission over the Ethernet port. This parameter can beFull(Full when "Auto negotiation" is Enumeration Type Half(Half duplex), Full(Full duplex) duplex), set only duplex) Half(Half When the cell is automatically shut down, this parameter is used to repeatedly determine whether the cell needs to be automatically enabled. Interval Type 1~3600 1~3600 When the cell is automatically enabled, the cell can be automatically disabled again only after a period delay. Interval Type 60~3600 60~3600 When the switch is on, the Cell dynamic shutdown algorithm of the local RNC cell is enabled. When the switch is off, the Cell dynamic shutdow Enumeration Type OFF(switch off), ON(switch on) ON OFF, When the switch is on, the "Cell dynamic shutdown" feature is valid. off), ON_1(switch on1), ON_2(switch on2), ON_3(switch on3) Enumeration Type OFF(switch OFF, ON_1, ON_2, ON_3 When DynShutDownType is Enumeration Type set to ForceShutDown, the cell will shut down in the shutdown time interval. When DynShutDownType is set to C FORCESHUTDOWN(ForceShutDown), CONDITIONALSHUTDOWN(Conditional FORCESHUTDOWN, CONDITIONALSHUTDOWN This parameter specifies the number of the E1/T1 link that0~31 the fractional ATM/IMA 31 Interval Type carries 0 to link. Period of E-DCH throughput Interval Type ratio measurement. This parameter specifies the period of 10~100000 Step: 10ms measurement. The throughput r 1~10000 E-DCH throughput ratio Number of pending periods after the throughput ratio event 4B for state transition from E-DCH to FACH is triggered. This parameter is used to Interval Type 0~1023 0~1023 This parameter is used to check whether the UE in the low0~384 state. If the UE is on0~384 Interval Type activity the E-DCH channel, the low activity counter increases b Number of periods before theInterval Type throughput ratio event 4B for state transition from E-DCH to FACH is triggered. When the throughput ratio is bel 0~1023 0~1023 The parameter specifies the number of codes (SF=256) used by the E-DCH Absolute Grant Channel (E-AGCH). If the parameter value is set too Interval Type 1~8 1~8 Check IP address. The IP address to be checked must be within the network segment specified by [Peer IP address] and [Peer subnet mask]. IP Address Type 0.0.0.0~255.255.255.255 This parameter is used to count the adjusted step of Ec/N0 0~5000 quality adjust algorithm for E-FACH. Interval Type in the link 0~5, step: 0.001 This parameter specifies the adjustment cycle of Ec/N0. This parameter is also used to determine the measurement period of the RLC retransmis Interval Type 1~1000 10~10000, step: 10
This parameter specifies the time duration when the reported Ec/N0 is valid. The reported Ec/N0 is valid for the period (starting from the time w Interval Type 0~65535 0~65535
This parameter specifies the maximum value that Ec/N0 can be stepped down in the link quality adjust algorithm for E-FACH. Interval Type 0~5000 0~5, step: 0.001 This parameter specifies the maximum value that Ec/N0 can be stepped up in the link qualitystep: 0.001 Interval Type 0~5000 0~5, adjust algorithm for E-FACH.
This parameter specifies the threshold for determining the 0~49 quality in a cell. If the -24.5~0 Ec/N0 exceeds the value of this parameter, you Interval Type signal reported
This parameter specifies the end date Type DST. The value 30 and 31 is invalid in February. Interval of the 1~31 1 to 31 This parameter specifies the first MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval Type 1~5000 1~5000 This parameter specifies the tenth MAC-d PDU size used by HSUPA services. The size1~5000 a multiple of 8 bits. Interval Type 1~5000 must be This parameter specifies the eleventh Type PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval MAC-d 1~5000 1~5000 This parameter specifies the twelfth MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval Type 1~5000 1~5000 This parameter specifies the second MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval Type 1~5000 1~5000 This parameter specifies the third MAC-d PDU size used by HSUPA services. The size1~5000 a multiple of 8 bits. Interval Type 1~5000 must be This parameter specifies the fourth MAC-d PDU size used1~5000 Interval Type by HSUPA services. The size must be a multiple of 8 bits. 1~5000 This parameter specifies the fifth MAC-d PDU size used by HSUPA services. The size 1~5000 a multiple of 8 bits. Interval Type 1~5000 must be This parameter specifies the sixth MAC-d PDU size used by HSUPA services. The size1~5000 a multiple of 8 bits. Interval Type 1~5000 must be This parameter specifies the seventh MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval Type 1~5000 1~5000 This parameter specifies the eighth MAC-d PDU size used1~5000 Interval Type by HSUPA services. The size must be a multiple of 8 bits. 1~5000 This parameter specifies the ninth MAC-d PDU size used by HSUPA services. The size1~5000 a multiple of 8 bits. Interval Type 1~5000 must be This parameter specifies the number of sizes of E-DCH MAC-d PDUs.D4, D5, D6, D7,1, 2, 3, 4, D10,can beD12 11, 12 with multiple PDU size Enumeration Type D1, D2, D3, Currently, only VoIPD9, 5, 6, 7, 8, 9,configured D8, services D11, 10, This parameter specifies the number of measurement periods during which no event 4A0~1023 to E-DCH throughput is reported again after suc Interval Type 0~1023 related This parameter specifies the number of measurement periods during which no event 4B 0~1023 to E-DCH throughput is reported again after suc Interval Type 0~1023 related
HSUPA UL rate adjustment set. It contains rates for rate adjustment and is RATE_16KBPS, RATE_32KBPS, RATE_64KBPS, RATE_128KBP Bit Field Type RATE_8KBPS, used in the HSUPA DCCC algorithm. 384, 608, 1440, 2048, 2880 8, 16, 32, 64, 128, 144, 256, This parameter specifies the maximum allowed SIR decrease step for HSUPA within an0~5, step: 0.001 of outer-loop power control. Interval Type 0~5000 adjustment period
The large target retransmit times for E-DCH MAC-ES PDU used to bear the service. Interval Type 0~15000
0~15, step:0.001
The little target retransmit times for E-DCH MAC-ES PDU used to the normal service. 0~15, step:0.001 Interval Type 0~15000 This parameter specifies the number of measurement periods from the moment when the E-DCH rate exceeds the 4A threshold to the moment w Interval Type 0~1023 0~1023 This parameter specifies the number of measurement periods from the moment when the E-DCH rate falls below the 4B threshold to the momen Interval Type 0~1023 0~1023 This parameter specifies the E-DCH TTI type. Enumeration Type EDCH_10MS, EDCH_2MS EDCH_10MS,EDCH_2MS EFACH channel forward factor. Interval Type 0~100 0~100 This parameter specifies the minimum guaranteed power of the DTCH mapped onto the-35~15,step:0.1 Interval Type -350~150 EFACH. E_FACH support indicator. When the indicator is TRUE, it indicates that the cell supports E_FACH. Enumeration Type TRUE, FALSE FALSE,TRUE This parameter specifies whether the RRC Type Enumeration connection is established preferentially on the E-FACH. If this parameter is set to ON and both the U OFF, ON OFF, ON This parameter specifies whether the compressed mode can be enabled for the HSPA+ service. When the parameter is set to TRUE, the compres Enumeration Type FALSE(Forbidden), TRUE(Permit) FALSE,TRUE This parameter specifies the type of the end date. DATE indicates WEEK, DST starts from a certain day. WEEK indicates that the DST starts fr Enumeration Type DATE, that the DATEWEEK DATE, WEEK, DATEWEEK When the switch is enabled, users of emergency call can preempt all the users of non emergency call. When the switch is disabled, users of eme Enumeration Type OFF, ON OFF, ON It indicates whether verification is needed in the case of establishment of a signalling link in aON set. The value ON indicates that verification Enumeration Type OFF, ON OFF, link This parameter specifies whether the RNC Type Enumeration specially handles the ON requests of emergency calls. In other words, the RNC provides highly accu OFF, LCS OFF, ON
This parameter specifies the end month of Type Enumeration the DST. JAN(January), FEB(February), MAR(March), APR(April), MAY(May),AUG, SEP, O JAN, FEB, MAR, APR, MAY, JUN, JUL, JUN(June), This parameter specifies the IP address for the EMS. IP Address Type 0.0.0.0~255.255.255.255 The encryption algorithm supported byType Both UEA0 UEA0, UEA1 be selected at For each switch of this parameter, the value can be: ON Bit Field RNC. and UEA1 can one time. End time of the first interval when the "Cell dynamic shutdown" feature is valid. Compound Type HOUR, MIN 00:00~23:59 End time of the second interval when theType dynamic shutdown"MIN is valid. Compound "Cell HOUR, feature 00:00~23:59 End time of the third interval Compound Type when the "Cell dynamic shutdown" feature is valid. HOUR, MIN 00:00~23:59
Type of the M3UA destination entity. Enumeration Type M3UA_SGP(M3UA SPG), M3UA_IPSP(M3UA IPSP), M3UA_SS7SP(M3UA SS7S M3UA_SGP, M3UA_IPSP, M3UA_SS7SP, M3UA_SP This parameter specifies the number of detected error frames received in error frame events.1000 Interval Type 1~1000 1 to This parameter specifies the period ofType Interval detecting error frame events. 1~60 1 to 60 This parameter specifies the number of detected error frames received in error frame events.1000 Interval Type 1~1000 1 to This parameter specifies the period ofType Interval detecting error frame events. 1~4294967295 1 to 4294967295 This parameter specifies the number of detected error frames received in error frame events.900 Interval Type 1~900 1 to This parameter specifies the period ofType Interval detecting error frame events. 10~900 10 to 900 The parameter specifies the number of codes (SF=128) used by the E-DCH Relative Grant Channel (ERGCH)/E-DCH Hybrid ARQ Indicator Channel (EHICH). The E-RGCH is used to adjust the uplink power available for the UE. The E-HICH is used to provide feedback on the ACK/NACK information, which indicates whether the data that the RNC receives from the E-DCH is correct or not. The E-RGCH and EHICH are dedicated channels shared by multiple UEs. They share the OVSF channel code with SF=128 and use the orthogonal signature sequence to differentiate subscribers. If the parameter value is set too high, the downlink codes are wasted. If the parameter value is set too low, the uplink throughput of the HSUPA is restricted. For details about this parameter, refer to 3GPP TS 25.433.
Interval Type 1~8 1~8 AAL2 connection establishment indication timer.This timer is started when an AAL2 signaling entity sends the service user an indication for es Interval Type 5000~30000 5000~30000 AAL2 connection establishment request timer.This timer is started when an AAL2 signaling entity sends the peer node a request for establishing Interval Type 5000~30000 5000~30000 This parameter specifies the end time of the DST. Compound Type HOUR, MIN, SEC HOUR, MIN, SEC This parameter specifies the threshold to trigger event 4A related to DCH traffic volume,D512, 64, 128, D2K,512, 1024, 2K, 3K,D8K,6K, 8K, D1 Enumeration Type D16, D32, D64, D128, D256,16, 32, D1024, 256, D3K,the traffic volume. The larger that is, the upper limit of D4K, D6K, 4K, D12K, 12 This parameter specifies the threshold to trigger event 4B related to DCH D64, D128, D256, D512, D1024, D2K, D3K, D4K,volume. The small Enumeration Type D8, D16, D32, traffic volume, that is, the lower 256, 512, 1024, 2K,D6K,4K, 6K, 8K, 8, 16, 32, 64, 128, limit of the traffic 3K, D8K, D12K This parameter specifies the event A reporting period. It refers to the delay from the moment when event A is triggered to the moment when the Interval Type 0~1000 0~100, step: 10 This parameter specifies the threshold of event A, that is, the upper limit of RLC retransmission ratio. Interval Type 0~1000 0~100, step: 0.1
This parameter specifies the threshold of event B, that is, the lower limit of RLC retransmissionstep: 0.1 Interval Type 0~1000 0~100, ratio. This parameter specifies the DST start dayTypeweek. Enumeration in a SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesday), THU(Thursday), SUN, MON, TUE, WED, THU, FRI, SAT This parameter specifies the DST end week in a month. FIRST(First), SECOND(Second), THIRD(Third), FOURTH(Fourth), LAST(Last) Enumeration Type FIRST, SECOND, THIRD, FOURTH, LAST This parameter specifies the upper threshold for signal output of external analog 1(unit:ampere/volt). String Type 1~9 character This parameter specifies the lower threshold for signal output of external analog 1(unit:ampere/volt). String Type 1~9 character This parameter specifies the sensor type ofType Enumeration external analogVOLTAGE(Voltage), CURRENT(Current) 1. VOLTAGE,CURRENT This parameter specifies the upper threshold for measurement range of external analog 1. character String Type 1~9 This parameter specifies the lower threshold for measurement range of external analog 1. character String Type 1~9 This parameter specifies the upper threshold for signal output of external analog 2(unit:ampere/volt). String Type 1~9 character This parameter specifies the lower threshold for signal output of external analog 2(unit:ampere/volt). String Type 1~9 character This parameter specifies the sensor type ofType Enumeration external analogVOLTAGE(Voltage), CURRENT(Current) 2. VOLTAGE,CURRENT This parameter specifies the upper threshold for measurement range of external analog 2. character String Type 1~9 This parameter specifies the lower threshold for measurement range of external analog 2. character String Type 1~9 This parameter specifies the upper threshold for signal output of external analog 3(unit:ampere/volt). String Type 1~9 character This parameter specifies the lower threshold for signal output of external analog 3(unit:ampere/volt). String Type 1~9 character This parameter specifies the sensor type ofType Enumeration external analogVOLTAGE(Voltage), CURRENT(Current) 3. VOLTAGE,CURRENT This parameter specifies the upper threshold for measurement range of external analog 3. character String Type 1~9 This parameter specifies the lower threshold for measurement range of external analog 3. character String Type 1~9 This parameter specifies the upper threshold for signal output of external analog 4(unit:ampere/volt). String Type 1~9 character This parameter specifies the lower threshold for signal output of external analog 4(unit:ampere/volt). String Type 1~9 character This parameter specifies the sensor type ofType Enumeration external analogVOLTAGE(Voltage), CURRENT(Current) 4. VOLTAGE,CURRENT This parameter specifies the upper threshold for measurement range of external analog 4. character String Type 1~9 This parameter specifies the lower threshold for measurement range of external analog 4. character String Type 1~9 Pending time after the traffic Enumeration Type reported.D250,parameter is used to prevent 500,many traffic volume8000, 16000 volume event 4B is This D500, D1000, D2000, 250, too D8000, 2000, 4000, events 4B being reported. D4000, 1000, D16000 When the traffic volume is below the 4B threshold and remains so for the D40, D60, D80, 10, thisD120, D160, D200, D240,200, 240, 320,D128 Enumeration Type D0, D10, D20, period specified D100, 40, 60, 80, 100,event 4B is D320, D640, 640, 0, by 20, parameter, the 120, 160, reported. This para Uniquely identifying a FACH in a cell. Interval Type 1~32 1~32 ID of the transport channel carrying the MCCH. Interval Type 1~32 1~32
This parameter specifies the maximum power of the FACH. Interval Type -350~150 -35~15, step: 0.1 Indicating whether the FACH measurement occasion period length coefficient should be delivered through the system information. If the inter-f Enumeration Type REQUIRE, NOT_REQUIREREQUIRE,NOT_REQUIRE This parameter defines the reduce value in reducing FACH power Action. Interval Type 0~30 0~3,step:0.1 This parameter specifies the factor associated with the scheduling priority indicator. This factor is used to calculate the step of rate upsizing. Interval Type 0~100 0~100 This parameter specifies the activity factor. The configured bandwidth of the CCP, NCP, ALCAP, or OM link IPoA PVC multiplied by the activ Interval Type 0~100 0%~100% This parameter specifies the threshold of allowed times of 1~255 Interval Type rate increase consecutive failure within a certain monitoring period. Increase of the B 1~255 This parameter specifies whether to send and receive flow ENABLE, DISABLE Enumeration Type control frame in the Ethernet.ENABLE, DISABLEto enable the flow control. It indicates whether
This parameter specifies the flow control parameter index. 0~1999 Interval Type
0 to 1999
This parameter specifies the CRC check mode. Enumeration Type None, 16bit, 32bit None(No CRC check), 16bit(16bit CRC check), 32bit(3 This parameter specifies the step size of the closed-loop power control performed on DL DPCH in 2 Enumeration Type STEPSIZE_0.5DB, STEPSIZE_1DB, STEPSIZE_1.5DB, STEPSIZE_2DB mode. Fo 0.5, 1, 1.5, Frequency Division Duplex (FDD)
This parameter indicates FDPCH diversityType for MIMO user.STTD Enumeration mode None,
None, STTD
This parameter indicates FDPCH diversityType for non MIMO user. Enumeration mode None, STTD None, STTD This parameter specifies the maximum reference power for the F-DPCH. This parameter indicates the maximum value of reference F-DPCH TX Interval Type -350~150 -35~15, step:0.1 This parameter specifies the minimum reference power for-350~150 Interval Type the F-DPCH. This parameter indicates the minimum value of reference F-DPCH TX -35~15, step:0.1 This parameter specifies the power offset of TPC command in F-DPCH channel to referencestep: 0.25 TX power (expressed by the Initial DL T Interval Type 0~24 0~6, F-DPCH This parameter specifies the FE Address Type the DHCP server. IP IP address for 0.0.0.0~255.255.255.255
This parameter specifies the name used to save the exported file. This name should not contain the directory. String Type 0 to 128 characters This parameter specifies the path for saving the exported file. String Type 0 to 128 characters
According to the 3GPP TS 25.331, the filtering of the measurement value is calculated using the following formula, where k represents this parameter: Fn = (1 - a) * Fn - 1 + a * Mn Here, Fn: the updated filtered measurement result Fn - 1: the old filtered measurement result Mn: the latest received measurement result from physical layer measurements a = (1/2)(k/2). When a is set to 1, this means L3 filtering will not be applied. L3 filtering should be able to filter as much random impulse as possible. Thus the filtered measurement value can reflect the varying of the actual measurement value. The input measurement value to L3 filter has been filtered by L1 filter, where the impact of fast fading is almost eliminated. So the L3 filtering should apply Enumeration Type smooth filtering to shadow
D0, D1, D2, D3, D4, D5, D6,0,1,2,3,4,5,6,7,8,9,11,13,15,17,19 D19 D7, D8, D9, D11, D13, D15, D17,
L3 filtering coefficient for event 2D or event 2F measurement. The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-fast-fading capability, but the lower the signal change tracing capability. If the value of this parameter is set too small, unnecessary intersystem handovers may occur. The parameter has the same physical meaning and measurement model as the inter-frequency measurement L3 filter coefficient. The report period is 480 ms. For specific analysis, refer to the intra-frequency measurement layer 3 filter coefficients and interfrequency measurement layer 3 filter coefficients. The recommended values of the inter-RAT measurement layer 3 filter coefficients in different cells are as follows: -In cells where the average Enumeration Type D0, D1, D2, D3, D4, D5, D6,0,1,2,3,4,5,6,7,8,9,11,13,15,17,19 D19 D7, D8, D9, D11, D13, D15, D17, moving speed of UEs is This parameter specifies the fixed MAC-hs window size. It is validD8, D12, D16, D24, 4, window size 24, 32or not] parameter is set to TRUE. Enumeration Type D4, D6, when the [Is MAC-hs 6, 8, 12, 16, fixed D32 Switch of the FLC algorithm.EnumerationaType The FLC is mandatory algorithm used in the multi-frequency network to guarantee that UEs camping on other fr OFF(OFF), ON(ON) OFF, ON
This parameter specifies whether the switch of flow control on the link is turned on. Enumeration Type OFF, ON OFF, ON This parameter specifies the flow ID. Type Interval 0~299 0~299 This parameter specifies the file name. The license file must be saved in \FTP\License. If to 100 characters specified, the latest license file in String Type 0 the file name is not This parameter specifies the file name. String Type 1~128 characters When the CELLID+RTT method is selected, this parameter specifies whether forced soft handover is performed if the number of RTT measured Enumeration Type OFF, ON OFF, ON Indicating whether to check the link of the Type with FPMUX. Only FG2a and GOUa board support FPMUX. Enumeration IP path NO, YES NO, YES FPTIMER. Interval Type 1~10 1~10 This parameter specifies the MP flake size. Interval Type 128~1024 128 to 1024 This parameter specifies the number of a fractional ATM/IMA link. Interval Type 0~31 0 to 31
This parameter specifies the type of a fractional link. Enumeration Type FRAATM, FRAIMA FRAATM, FRAIMA The longer a TX frame is, theEnumeration Type higher the transmission efficiencyD64, D128, D256 sensitivity against error is. D32, is but the less the D32,D64,D128,D256 Index of the factor table usedIntervalcurrent adjacent node.0~33 by the Type 0~33 Factor table index. Interval Type 1~33 1~33 Function switch 1. Bit Field Type PDCP(PDCP header compress), AMRC(AMR voice coding rate control), TFOTRFO PDCP,AMRC,TFOTRFO,INDIRECRETRY,INTERRA Function switch 2. Bit Field Type WBAMR(Wide band AMR),WBAMR,HSUPA,RANSHARE,HSDPA3.6M,HSDPA7 HSUPA(HSUPA), RANSHARE(RAN sharing), HSDP Function switch 3. Bit Field Type SRNSRWCUPDATE(SRNS SRNSRWCUPDATE,LOSSLESSSRNSRELCT,INTER Relocation with Cell/URA Update), LOSSLESSSRNSR Function switch 4. Bit Field Type DYNAMIC_POWER_ESTIMATION_FOR_MTCH(Dynamic Power Estimation for DYNAMIC_POWER_ESTIMATION_FOR_MTCH,ON
When the remaining transmitInterval Type smaller than or 0~1000000 parameter value, the 1000000 congestion alarm is triggered. bandwidth is equal to this 0 to forward This parameter specifies the remaining bandwidth threshold for generating the forward congestion alarm. Interval Type 0~149000 AOUa/AEUa: 0~64000; UOIa (directly carried on the le
If the available forward bandwidth is less than or equal to this value, the forward congestion alarm is emitted. Interval Type 0~320000 0~320000
If the available forward bandwidth is less than or equal to this value, the forward congestion alarm is emitted. Interval Type 0~3000000 0~3000000
If the available forward bandwidth is less than or equal to this value, the forward congestion alarm is emitted. Interval Type 0~4000000 0~4000000
When the remaining transmitInterval Type greater than this parameter value, the forward congestion alarm is cleared. bandwidth is 0~1000000 0 to 1000000
This parameter specifies the forward congestion clear threshold. When the remaining bandwidth reaches this parameter value, the forward conge Interval Type 0~200000 0~200000 This parameter specifies the remaining bandwidth threshold for clearing the forward congestion. Interval Type 0~149000 AOUa/AEUa: 0~64000; UOIa (directly carried on the le
If the available forward bandwidth is greater than this value, the forward congestion alarm is cleared. Interval Type 0~320000 0~320000
If the available forward bandwidth is greater than this value, the forward congestion alarm is cleared. Interval Type 0~3000000 0~3000000
If the available forward bandwidth is greater than this value, the forward congestion alarm is cleared. Interval Type 0~4000000 0~4000000
This parameter specifies the transmit Type Interval bandwidth reserved for the user in handover. 0~1000000
0 to 1000000
This parameter specifies the bandwidth reserved for the forward handover. Interval Type 0~149000
0~320000
0~320000
0~3000000
0~3000000
Reserved forward bandwidth Interval Type user. for handover 0~4000000 0~4000000 The power occupancy factor of the control part. For detailed information of this parameter, refer to 3GPP TS 25.214. Interval Type 1~15 1~15 The power occupancy factor of the data part. For detailed information of this parameter,0~15 to 3GPP TS 25.214. Interval Type 0~15 refer This parameter specifies the IP address for the check. IP Address Type 0.0.0.0~255.255.255.255 Geo-coordinate data format, DEG or SEC. Type Enumeration DEG(Degree), SEC(Degree Minute and Second) 0~1
This parameter specifies the geographical coordinate data format (GCDF), either in degrees orSEC form of degree:minute:second. Enumeration Type DEG(DEG), SEC(SEC) DEG, in the General common channel service downlink factor. Interval Type 0~100 0~100 General common channel service uplink factor. Interval Type 0~100 0~100
Maximum rate of the wideband AMR speech service for gold users. Enumeration Type WBAMR_BITRATE_6.60K,6.60, 8.85, 12.65, 14.25, 15.85,WBAMR_BITRATE_12 WBAMR_BITRATE_8.85K, 18.25, 19.85, 23.05, 23.8
Maximum rate of the narrowband AMR speech service forNBAMR_BITRATE_4.75K, 4.75, 5.15, 5.90, 6.70, 7.40, 7.95, 10.20, 12.20 Enumeration Type gold users. NBAMR_BITRATE_5.15K, NBAMR_BITRATE_5.90 Indicates whether gold users involve in theType of congestion control. According to the policy set for gold users by operators, if service qualit Enumeration switch OFF(OFF), ON(ON) OFF, ON This parameter specifies the period ofType Interval reporting the GPS data. 1~60 1 to 60 Number of the transport resource group. Interval Type 0~119 0~119 Type of the transport resource group. TypeType transportATM, IP group. Enumeration of the resource ATM, IP
Uniquely identifying a GSM Interval Type cell. 0~65535 0~65535 A name identifying a GSM cell uniquely. String Type 1~31 characters When event 5A is triggered, a pending timer is started, during which event 5A will not be reported before the specified number is reached. This Interval Type 1~512 1~512 This parameter specifies the Happy bit rate of the best-effort (BE) service with different0~5000 Interval Type 0~5000 user priorities. The Happy bit rate is the private informa This parameter indicates whether the cell of the neighboring RNC supports the HARQ Preamble capability. Mode1 means the cell supports the Enumeration Type Mode0, Mode1 Mode0,Mode1 This parameter specifies the time used for decision of HSUPA D10, D20, The decisionD200, D500,whether200,the buffered user data can be tran Enumeration Type D2, happy bit. D50, D100, is based on D1000 all 500, 1000 2, 10, 20, 50, 100, It can be used to calculate theInterval Type heartbeat interval of the idle1000~600000 SCTP server. 1000~600000 This parameter specifies the type of link that carries the high-end VPL/VCL cross connection. GUI value range: UNI, IMA, FRAATM, NCOPT. Enumeration Type UNI, IMA, FRAATM, NCOPT IMA, FRAATM, NCOPT UNI,
This parameter is used for setting the Type timer length for adjusting hsdpa code again. Interval punish 0~300 0~300
HCS priority of the cell belongs to. The parameter depends on HCS rules. For details, refer to 3GPP TS 25.304. Interval Type 0~7 0~7 HSDPA background service downlink factor. Interval Type 0~100 0~100
HSDPA background primary Enumeration Type path. CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSDPA background bearing Interval Type load threshold. 0~100 primary path 0~100
HSDPA background secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSDPA background primary Interval Type load ratio threshold. secondary path 0~100 0~100 HSDPA conversational service downlink factor. Interval Type 0~100 0~100
HSDPA conversational primary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSDPA conversational bearing primary path load threshold. Interval Type 0~100 0~100
HSDPA conversational secondary path. Type Enumeration CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSDPA conversational primary secondary path load ratio threshold. Interval Type 0~100 0~100 HSDPA high priority interactive bearing primary path load0~100 Interval Type threshold. 0~100 HSDPA high priority interactive primary secondary path load ratio threshold. Interval Type 0~100 0~100 HSDPA interactive service downlink Type Interval factor. 0~100 0~100
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
HSDPA middle PRI interactive secondary Type Enumeration path. CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSDPA low priority interactive bearing primary path load 0~100 Interval Type threshold. 0~100 HSDPA low priority interactive primary secondary path load ratio threshold. Interval Type 0~100 0~100 HSDPA middle priority interactive bearing primary path load threshold. Interval Type 0~100 0~100 HSDPA middle priority interactive primary secondary path load ratio threshold. Interval Type 0~100 0~100 HSDPA IMS downlink factor. Interval Type 0~100 0~100
HSDPA Signal primary path.Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSDPA IMS Signal bearing primary path load threshold. 0~100 Interval Type 0~100
HSDPA Signal secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSDPA IMS Signal primary Interval Type load ratio threshold. secondary path 0~100 0~100 HSDPA SRB downlink factor. Interval Type 0~100 0~100
HSDPA Signal primary path.Enumeration Type HSDPA Signal bearing primary path load threshold. Interval Type
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF 0~100 0~100
HSDPA Signal secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSDPA Signal primary secondary path load ratio threshold. Interval Type 0~100 0~100 HSDPA streaming service downlink factor. Interval Type 0~100 0~100
HSDPA streaming primary path. Enumeration Type HSDPA streaming bearing primary path load threshold. Interval Type
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF 0~100 0~100
HSDPA streaming secondaryEnumeration Type path. CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSDPA streaming primary secondaryType load ratio threshold. Interval path 0~100 0~100 HSDPA voice service downlink factor. Interval Type 0~100 0~100
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
HSDPA Voice secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF This parameter specifies the number of the Fractional link 0~31 Interval Type corresponding to the high-end port. For the AEUa, the number ranges from 0 to 31. F 0 to 31
32-bit unsigned integer. 1) DL_DCCH_SWITCH. When it is checked, SRNC will include the IE "RB Id for handover message" in the IE "SRNS Relocation Info", the target RNC should choose the IE "DL DCCH message" and include the DL DCCH message that should be transmitted transparently to the UE by the source RNC. In that case, the target RNC is integrity protecting the message if applicable. 2) IUR_TRG_SWITCH. When it is checked, relocation execution may trigger as an implementation option from the Iur interface.
Bit Field Type DL_DCCH_SWITCH, IUR_TRG_SWITCH DL_DCCH_SWITCH, IUR_TRG_SWITCH Indicating whether to trigger hard handover cross the Iur interface between the RNC and the neighboring RNC. Enumeration Type OFF, ON OFF,ON This parameter specifies the number of the IMA group corresponding to the high-end port. For the AEUa, the number ranges from 0 to 31. For t Interval Type 0~83 0 to 83 A timer to RNC wait for the response Type Interval to active set update in soft handover procedure. 1~10000 1~10000 A timer to RNC wait for the response Type cell update confirm from UE in forward handover procedure. Interval to the 1~10000 1~10000 Priority of coverage-based inter-frequency handover. "0" means that the coveragebased inter-frequency handover is not supported. "1" means the highest priority. "3" means the lowest priority.
Interval Type 0~3 0~3 A timer to RNC wait for paging response in forward handover procedure. Interval Type 1~10000 1~10000 A timer to RNC wait for the response Type Interval to physical channel reconfiguration in hard handover procedure. 1~10000 1~10000 A timer to RNC wait for relocation request in forward handover procedure. Interval Type 1~10000 1~10000
This parameter specifies the NodeB host type in RNC Node Redundancy function. If the parameter value is SINGLEHOST, the physical NodeB is managed only by one RNC. If the parameter value is PRIMHOST or SECHOST, the physical NodeB can be managed by two RNCs. By default, the NodeB is managed by the host RNC. When the host RNC fails, the physical NodeB is managed by the secondary RNC. Enumeration Type HandOver switch. 1) HO_ALGO_HCS_SPEED_ EST_SWITCH: When the switch is on, the RNC evaluates the UE's moving speed in the HCS and initiates fast intra-layer or slow inter-layer handover. 2) HO_ALGO_LDR_ALLOW _SHO_SWITCH: When the switch is on, the LDR interfrequency handover is allowed during soft handover. 3) HO_ALGO_MBMS_FLC_ SWITCH: When the switch is on, the UE requires that the redirection strategy be used for frequency layer convergence. 4) HO_ALGO_OVERLAY_S WITCH: When the switch is on, the associated receiving and mobility algorithms of the overlay network are used. When the switch is not on, the associated algorithms are not used. Overlay network Bit Field Type is an UTRAN network
Threshold of signal quality of the target frequency for triggering interfrequency(Ec/No) measurement. If the mode is set to event mode, this parameter is used to set measurement control on the event 2C. If the mode is set to periodical mode, this parameter is used to estimate the periodical reports and only if quality of the target frequency is beyond the threshold, the DRD procedure is triggered. Interval Type
-24~0
-24~0
Threshold of signal quality of the target frequency for triggering interfrequency(RSCP) measurement. If the mode is set to event mode, this parameter is used to set measurement control on the event 2C. If the mode is set to periodical mode, this parameter is used to estimate the periodical reports and only if quality of the target frequency is beyond the threshold, the DRD procedure is triggered. Interval Type -115~-25 -115~-25 A timer to RNC wait for the response Type TrCH reconfiguration or RB reconfiguration response from UE in hard handover procedure. Interval to the 1~10000 1~10000 This parameter specifies the number of the optical port corresponding to the high-end port. 3 Interval Type 0~3 0 to DL activity factor of the HSUPA background service. Interval Type 0~100 0~1, step: 0.01 Average throughput admission threshold of the HSDPA best effort traffic. If the sum of0~1, step:0.01 accessed HSDPA BE users is lower than Interval Type 0~100 PBR of all the
This parameter determines whether the compressed mode (CM) is permitted for the UE when the HSDPA services exist. If the parameter value is set to TRUE, compressed mode is permitted on HSDPA, and HSDPA services can be set up when the compressed mode is activated. If the parameter value is set to FALSE, channel switch on H2D (from HS-DSCH to DCH) should be performed before compressed mode is started, and no HSDPA services should exist when compressed mode is activated. This switch is used for the compatibility of the HSDPA terminals existing in the network because these HSDPA terminals do not support the activated compressed mode on HSDPA services existence.
Enumeration Type FALSE(Forbidden), TRUE(Permit) FALSE,TRUE DL activity factor of the HSUPA conversational service. 0~100 Interval Type 0~1, step: 0.01 DL activity factor of the HSUPA interactive service. Interval Type 0~100 0~1, step: 0.01 Length of smoothing filter window ofType Interval HSDPA power requirement. 1~32 1~32
Length of smoothing filter window ofType Interval HSDPA bit rate. 1~32 1~32 The minimum number of HSDPA service setup attempt Per Spu, the sum of HSDPA serive setup attempt need to be higher than this threshold t Interval Type 0~65534 0~65534 Successful HSDPA service setup ratio Per Spu, if the ratio0~100 than this threshold in a checking period, need arise KPI alarm. Interval Type is lower 0~100 DL activity factor of the HSUPA streaming service. Interval Type 0~100 0~1, step: 0.01 Average throughput admission threshold of the HSDPA streaming service. If the sum of0~1, step:0.01 accessed streaming users is lower than th Interval Type 0~100 PBR of all the The total HSDPA throughputInterval Type of all the operators cannot exceed that defined in the licenseto 3910000 0~3910000 0 file. The cell will shut down automaticallyType when the HSDPA user number is not greater0~5 the threshold. Interval only 0~5 than This parameter specifies the first MAC-d PDU size on the 1~5000 Interval Type HS-DSCH. For BE services, 1~5000 of MAC-d PDUs is usually set to a large value. the size This parameter specifies the second MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d PDUs is usually set to a large valu Interval Type 1~5000 1~5000 This parameter specifies the third MAC-d PDU size on the1~5000 Interval Type HS-DSCH. For BE services,1~5000 of MAC-d PDUs is usually set to a large value. the size This parameter specifies the fourth MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d PDUs is usually set to a large valu Interval Type 1~5000 1~5000 This parameter specifies the fifth MAC-d PDU size on the1~5000 Interval Type HS-DSCH. For BE services,1~5000 of MAC-d PDUs is usually set to a large value. the size This parameter specifies the sixth MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d PDUs is usually set to a large value Interval Type 1~5000 1~5000 This parameter specifies the seventh MAC-d PDU size on 1~5000 Interval Type the HS-DSCH. For BE services, the size of MAC-d PDUs is usually set to a large val 1~5000 This parameter specifies the eighth MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d PDUs is usually set to a large valu Interval Type 1~5000 1~5000 This parameter specifies the number of sizes of HS-DSCHD1, D2, D3, D4,Currently, only2, 3, 4,services 8 be configured with multiple PDU s Enumeration Type MAC-d PDUs. D5, D6, D7,1, VoIP 5, 6, 7, can D8 This parameter specifies the number of the slot in which the high-end port carries the VPL/VCL cross connection. Interval Type 14~27 14 to 27
If the HspaEnhSwitch is enabled, it indicates that the enhanced FDPCH function is supported in the cell. Note: The actual use of this function is also restricted by the license and the physical capability of the NodeB.
Enumeration Type E_F_DPCH_OFF, E_F_DPCH_ON E_F_DPCH_OFF,E_F_DPCH_ON According to the relevant protocols, MIMO, 64QAM, and MIMO, 64QAMOperation cannot be configured concurrently to the same UE. This pa Enumeration Type HS-SCCH Less MIMO,64QAM If the corresponding item of this parameter is selected, it indicates that the HspaPlusSwitchSwitch), MIMO(Cell MIMO Function Switch), E_FA Bit Field Type 64QAM(Cell 64QAM Function is enabled. Otherwise, it indicates that the HspaPlus 64QAM,MIMO,E_FACH,DTX_DRX,HS_SCCH_LESS This parameter specifies the difference between the total HSPA power and the maximum transmission power of a cell. The maximum value of H Interval Type -500~0 -50~0, step:0.1 HSPA serving cell change is Interval triggered by event 1D. To avoid frequent serving cell change which may affect the system performance, a p usually Type 0~1024 0~1024 This parameter specifies whether index 1 of the size of a transport block transmitted in HS-SCCH Less Operation mode supports HS-SCCH typ Enumeration Type FALSE, TRUE FALSE, TRUE This parameter specifies whether index 2 of the size of a transport block transmitted in HS-SCCH Less Operation mode supports HS-SCCH typ Enumeration Type FALSE, TRUE FALSE, TRUE This parameter specifies whether index 3 of the size of a transport block transmitted in HS-SCCH Less Operation mode supports HS-SCCH typ Enumeration Type FALSE, TRUE FALSE, TRUE This parameter specifies whether index 4 of the size of a transport block transmitted in HS-SCCH Less Operation mode supports HS-SCCH typ Enumeration Type FALSE, TRUE FALSE, TRUE The parameter specifies the number of HS-DPSCH codes. 1~15 parameter is valid only when "Allocate Code Mode" is set to "Manual". If the pa Interval Type This 1~15
The parameter determines the maximum number of HS-PDSCH codes (SF=16). This parameter is valid only when "Allocate Code Mode" is set Interval Type 1~15 1~15
The parameter specifies the minimumType Interval number of the HS-PDSCH codes (SF=16). This parameter is valid only when "Allocate Code Mode" is se 1~15 1~15 Measure Power Offset (MPO) Constant is Type to compute Measure Power Offset, as shown instep:0.5 Minus2.0DB(-2.0dB), Minus1.5DB(-1.5 Enumeration used Minus3.0DB(-3.0dB), Minus2.5DB(-2.5dB), Power Offset = Max(-6, Min(13,CellM -3~19, Measure
This parameter indicates the TX diversity preferably selected by HSPDSCH. Enumeration Type None, STTD, CP1 None, STTD, CP1 This parameter specifies the number of the subrack whose 0~5 Interval Type high-end port carries the VPL/VCL cross connection. 0 to 5 This parameter decides the maximumType of subscribers that the NodeB can schedule in a TTI period. In the scenarios like outdoor macro c Interval number 1~15 1~15 This parameter specifies the time interval of sending HSUPA scheduling information forD500, 50, 100, 200, 500, 1000 Enumeration Type D10, D20, D50, D100, D200,10, 20, D1000 the user has Schedule Grant. TTI 10ms when
This parameter specifies the time interval of sending HSUPA scheduling information alone 20, 50, 100, 200, 500, 1000 has no Schedule Grant Enumeration Type D10, D20, D50, D100, D200,10, for TTI 10ms when the user D500, D1000 This parameter specifies the time interval of sending HSUPA scheduling information for TTID500, D1000 user has Schedule Grant. Enumeration Type D2, D10, D20, D50, D100, D200, 20, 50, 100,the 500, 1000 2,10, 2ms when 200, This parameter specifies the time interval of sending HSUPA scheduling information alone for TTI D1000 Enumeration Type D2, D10, D20, D50, D100, D200, D500, 2ms when the user has no Schedule Grant an 2,10, 20, 50, 100, 200, 500, 1000 UL activity factor of the HSUPA background service. Interval Type 0~100 0~1, step: 0.01 Threshold for rate decrease of HSUPA BEType soft handover. If the current D128, beyondD256, D384, 144, 256, over the EDCH is lowered t Enumeration service D8, D16, D32, D64, rate is D144, 32, 64, 128, D608, D1450, 608, 1450, 2048, 2890 8, 16, the threshold, the rate 384, D2048, D2890, D5760 When the dynamic CE algorithm on NodeB is not applied,MBR, GBR indicates whether the CE consumption of HSUPA user is based on the Enumeration Type this parameter MBR, GBR This parameter determines whether the compressed mode (CM) is permitted for the UE when HSUPA services exist. If the parameter value is set to Permit, compressed mode is permitted on HSUPA, and HSUPA services can be set up when the compressed mode activated. If the parameter value is set to Limited, channel switch on E2D (from E-DCH to DCH) should be performed before the compressed mode is started and no HSUPA services should exist when the compressed mode is activated. If the parameter value is set to BasedonUECap, the RNC determines whether to activate the compressed mode on E-DCH based on the UE capability, and whether to establish an EDCH when the compressed mode is activated. This switch is used for the compatibility of the HSUPA terminals existing in the network because Enumeration Type Limited, Permit, BasedOnUECap(Based On UE this parameter, the value can be ON, For each switch of Capability) these HSUPA terminals do UL activity factor of the HSUPA conversational service. 0~100 Interval Type 0~1, step: 0.01 Strategy of the UE for rate adjustment overTypeEDCH. RATE_UP_AND_DOWN_ON_EDCH indicates that the rate over the EDCH can be rais Enumeration the RATE_UP_AND_DOWN_ON_EDCH, RATE_UP_ONLY_ON_EDCH RATE_UP_AND_DOWN_ON_EDCH, RATE_UP_ON Threshold of all the HSUPA user PBR whose schedule priority is the same as that of users tostep:0.01 Interval Type 0~100 0~1, be admitted. If this value is too high, the possibilit Threshold of all the HSUPA user PBR whose schedule priority is higher than that of users tostep:0.01 Interval Type 0~100 0~1, be admitted. If this value is too high, the possibility HSUPA BE traffic Initial bit Enumeration Type algorithm D8, D16, D32, D64,DCCC D144, D256, D384, D608, D1440, D2048, D2880,rate wi rate. When DCCC switch and HSUPA D128, algorithm switch are enabled, the uplink initial bit D5740 8,16,32,64,128,144,256,384,608,1440,2048,2880,5740 UL activity factor of the HSUPA interactive service. Interval Type 0~100 0~1, step: 0.01 Threshold of all the HSUPA user PBR whose schedule priority is lower than that of users to be admitted. If this value is too high, the possibility Interval Type 0~100 0~1, step:0.01 Length of smoothing filter window ofType Interval HSUPA bit rate. 1~32 1~32 The minimum number of HSUPA serive setup attempt Per0~65534 sum of HSUPA service setup attempt need to be higher than this threshold Interval Type Spu, the 0~65534 Successful HSUPA service setup ratio Per Spu, if the ratio0~100 than this threshold in a checking period, need arise KPI alarm. Interval Type is lower 0~100 UL activity factor of the HSUPA streaming service. Interval Type 0~100 0~1, step: 0.01 The total HSUPA throughputInterval Type of all the operators cannot exceed that defined in the licenseto 3910000 0~3910000 0 file.
0~100
0~1, step:0.01
HSUPA auto retransmit load Intervalthreshold. trigger Type 0~100 0~1, step:0.01 The cell will shut down automaticallyType when the HSUPA user number is not greater0~5 the threshold. Interval only 0~5 than
HSUPA background primary Enumeration Type path. CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSUPA background bearing Interval Type load threshold. 0~100 primary path 0~100
HSUPA background secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSUPA background primary Interval Type load ratio threshold. secondary path 0~100 0~100 HSUPA background service uplink factor. Interval Type 0~100 0~100
HSUPA conversational primary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSUPA conversational bearing primary path load threshold. Interval Type 0~100 0~100
HSUPA conversational secondary path. Type Enumeration CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSUPA conversational primary secondary path load ratio threshold. Interval Type 0~100 0~100 HSUPA conversational service uplinkType Interval factor. 0~100 0~100 HSUPA high priority interactive bearing primary path load0~100 Interval Type threshold. 0~100 HSUPA high priority interactive primary secondary path load ratio threshold. Interval Type 0~100 0~100 HSUPA interactive service uplink factor. Interval Type 0~100 0~100
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
HSUPA middle PRI interactive secondary Type Enumeration path. CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSUPA low priority interactive bearing primary path load 0~100 Interval Type threshold. 0~100 HSUPA low priority interactive primary secondary path load ratio threshold. Interval Type 0~100 0~100 This parameter specifies whether the alarmType Enumeration reporting for humidity is enabled. CLOSE(Close), OPEN(Open) CLOSE,OPEN This parameter specifies the upper threshold for humidity alarm. String Type 1~9 character This parameter specifies the lower threshold for humidity alarm. String Type 1~9 character HSUPA middle priority interactive bearing primary path load threshold. Interval Type 0~100 0~100 HSUPA middle priority interactive primary secondary path load ratio threshold. Interval Type 0~100 0~100 This parameter specifies the number of the UNI link corresponding to the high-end port. For167 AEUa, the number ranges from 0 to 31. For the Interval Type 0~167 0 to the
HSUPA Signal primary path.Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSUPA IMS Signal bearing primary path load threshold. 0~100 Interval Type 0~100
HSUPA Signal secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSUPA IMS Signal primary Interval Type load ratio threshold. secondary path 0~100 0~100 HSUPA IMS uplink factor. Interval Type 0~100 0~100
HSUPA Signal primary path.Enumeration Type HSUPA Signal bearing primary path load threshold. Interval Type
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF 0~100 0~100
HSUPA Signal secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSUPA Signal primary secondary path load ratio threshold. Interval Type 0~100 0~100 HSUPA SRB uplink factor. Interval Type 0~100 0~100
HSUPA streaming primary path. Enumeration Type HSUPA streaming bearing primary path load threshold. Interval Type
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF 0~100 0~100
HSUPA streaming secondaryEnumeration Type path. CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSUPA streaming primary secondaryType load ratio threshold. Interval path 0~100 0~100 HSUPA streaming service uplink factor. Interval Type 0~100 0~100
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
HSUPA Voice secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF HSUPA voice service uplink Interval Type factor. 0~100 0~100 This parameter specifies the VCI of the high-end VCL. 32~65535 Interval Type 32 to 65535 This parameter specifies the VPI of the high-end VPL/VCL. If the VPL is cross connected, VPI cannot be 0. Interval Type 0~255 0 to 255
This parameter specifies the hysteresis value for event 1A. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of ping-pong effect or wrong decision. But the event might not be triggered in time. For the definition, refer to 3GPP TS 25.331. The value of this parameter is ranged from 2 dB to 5 dB. Event 1A is a key event that adds a cell to the active set. To ensure timely handover, the hysteresis of event 1A should be set a little smaller than those of events 1B, 1F, 1C, and 1D. But the difference should not be too large, otherwise the soft handover ratio can be affected. In addition, this parameter is related to filter coefficient and trigger delay. As for the impact on network performance: For the UE that enters the SHO area, increase of the hysteresis means decrease Interval Type of the SHO area. But for the
0~15
0~7.5,Step:0.5
This parameter specifies the hysteresis value for event 1B. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of ping-pong effect or wrong decision. But the event might not be triggered in time. For the definition, refer to 3GPP TS 25.331. The value of this parameter is ranged from 2 dB to 5 dB. In addition, this parameter is related to filter coefficient and trigger delay. As for the impact on network performance: For the UE that enters the SHO area, increase of the hysteresis means decrease of the SHO area. But for the UE that leaves the SHO area, that means enlarging of the SHO area. If the number of UEs entering the area and the number of UEs leaving the area are equal, the real SHO ratio will not be affected. The larger the value of this parameter, the Interval Type stronger the capability of
0~15
0~7.5,Step:0.5
This parameter specifies the hysteresis value for event 1C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of ping-pong effect or wrong decision. But the event might not be triggered in time. For the definition, refer to 3GPP TS 25.331. The value of this parameter is ranged from 2 dB to 5 dB. In addition, this parameter is related to filter coefficient and trigger delay. As for the impact on network performance: For the UE that enters the SHO area, increase of the hysteresis means decrease of the SHO area. But for the UE that leaves the SHO area, that means enlarging of the SHO area. If the number of UEs entering the area and the number of UEs leaving the area are equal, the real SHO ratio will not be affected. The larger the value of this parameter, the Interval Type stronger the capability of
0~15
0~7.5,Step:0.5
This parameter specifies the hysteresis value for event 1D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of ping-pong effect or wrong decision. But the event might not be triggered in time. For the definition, refer to 3GPP TS 25.331. The value of this parameter is ranged from 2 dB to 5 dB. In addition, this parameter is related to filter coefficient and trigger delay. As for the impact on network performance: For the UE that enters the SHO area, increase of the hysteresis means decrease of the SHO area. But for the UE that leaves the SHO area, that means enlarging of the SHO area. If the number of UEs entering the area and the number of UEs leaving the area are equal, the real SHO ratio will not be affected. The larger the value of this parameter, the Interval Type stronger the capability of
0~15
0~7.5,Step:0.5
This parameter specifies the hysteresis value for event 1F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of ping-pong effect or wrong decision. But the event might not be triggered in time. For the definition, refer to 3GPP TS 25.331. The value of this parameter is ranged from 2 dB to 5 dB. In addition, this parameter is related to filter coefficient and trigger delay. As for the impact on network performance: For the UE that enters the SHO area, increase of the hysteresis means decrease of the SHO area. But for the UE that leaves the SHO area, that means enlarging of the SHO area. If the number of UEs entering the area and the number of UEs leaving the area are equal, the real SHO ratio will not be affected. The larger the value of this parameter, the Interval Type stronger the capability of
0~15
0~7.5,Step:0.5
This parameter specifies the hysteresis value for event 1J. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of ping-pong effect or wrong decision. But the event might not be triggered in time. For the definition, refer to 3GPP TS 25.331. The value of this parameter is ranged from 2 dB to 5 dB. In addition, this parameter is related to filter coefficient and trigger delay. As for the impact on network performance: For the UE that enters the SHO area, increase of the hysteresis means decrease of the SHO area. But for the UE that leaves the SHO area, that means enlarging of the SHO area. If the number of UEs entering the area and the number of UEs leaving the area are equal, the real SHO ratio will not be affected. The larger the value of this parameter, the Interval Type stronger the capability of Hysteresis value for the event 2B. The value of this parameter correlates with slow fading. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the pingpong effect can be resisted, but the speed of the handover algorithm to respond to signal change becomes lower, and therefore event 2B might not be triggered in time. Interval Type
0~15
0~7.5,Step:0.5
0~29
0~14.5,Step:0.5
Hysteresis value for the event 2C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the pingpong effect can be resisted, but the speed of the handover algorithm to respond to signal change becomes lower, and therefore event 2B might not be triggered in time. Interval Type Hysteresis value for the event 2D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the smaller probability of ping-pong effect or wrong decision, but event 2D might not be triggered in time. In periodical report mode, this parameter is used to resist the ping-pong effect of event 2D (the quality of the currently used frequency is lower than the threshold) and event 2F (the estimated quality of the currently used frequency is higher than the threshold). Event 2D is used to enable the compressed mode and event 2F is used to disable the compressed mode. Therefore, Hystfor2D can be increased on the basis of recommended value and inter-frequency handover ping-pong effect statistics. Hystfor2F can also be increased to reduce frequent enabling or disabling of compressed mode and to Interval Type avoid unnecessary updates
0~29
0~14.5,Step:0.5
0~29
0~14.5,Step:0.5
Hysteresis value for the event 2F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the smaller probability of ping-pong effect or wrong decision, but event 2F might not be triggered in time. In periodical report mode, this parameter is used to resist the ping-pong effect of event 2D (the quality of the currently used frequency is lower than the threshold) and event 2F (the estimated quality of the currently used frequency is higher than the threshold). Event 2D is used to enable the compressed mode and event 2F is used to disable the compressed mode. Therefore, Hystfor2D can be increased on the basis of recommended value and inter-frequency handover ping-pong effect statistics. Hystfor2F can also be increased to reduce frequent enabling or disabling of compressed mode and to Interval Type avoid unnecessary updates
0~29
0~14.5,Step:0.5
Hysteresis value for the event 3A. The value of this parameter correlates with slow fading. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the pingpong effect can be avoided, but the speed of the handover algorithm to respond to signal change becomes lower. If the interRAT handover hysteresis is set to an excessively high value, the GSM cell to which the UE is handed over must be of good quality. Therefore, the conditions for triggering the inter-RAT handover decision are hard to be satisfied, and the call drop rate increases. The emulation result shows that in a cell where the average moving speed of UEs is high, for example a cell that covers highways, HystforInterRAT can be set to 1.5 dB, because in the cell the terrain is flat and there are few barriers , Interval Type which causes small shadow
0~15
0~7.5,Step:0.5
Hysteresis value for the event 3C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the pingpong effect can be avoided, but the speed of the handover algorithm to respond to signal change becomes lower. If the interRAT handover hysteresis is set to an excessively high value, the GSM cell to which the UE hands over must be of good quality. Therefore, the conditions for triggering the inter-RAT handover decision are hard to be satisfied, and the call drop rate increases. The emulation result shows that in a cell where the average moving speed of UEs is high, for example a cell that covers highways, HystforInterRAT can be set to 1.5 dB, because in the cell the terrain is flat and there are few barriers , which causes a small Interval Type shadow fading variation. In
0~15
0~7.5,Step:0.5
Hysteresis value for interRAT measurement periodical reports. This parameter aims to prevent the mis-decision caused by unexpected jitters of signals during inter-RAT handover decisions. The HystforInterRAT and the inter-RAT handover decision threshold determine whether to trigger inter-RAT handovers. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the pingpong effect can be avoided, but the speed of the handover algorithm to respond to signal change becomes lower. If the interRAT handover hysteresis is set to an excessively high value, the GSM cell to which the UE is handed over must be of good quality. Therefore, the conditions for triggering the inter-RAT handover decision are hard to be satisfied, and the call drop Interval Type rate increases. Hysteresis for interfrequency hard handover in periodical report mode. This parameter is used to estimate the inter-frequency handover at the RNC. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the pingpong effect can be resisted, but the speed of the handover algorithm to respond to signal change becomes lower, and therefore event 2B might not be triggered in time.
0~15
0~7.5,Step:0.5
Interval Type 0~29 0~14.5,Step:0.5 After a connection is established successfully, the timer is 180~1260 the timer does not receive the detection message when the timer expires, th Interval Type started. If 180~1260 After a connection is established successfully, the timer is 60~600 When the timer expires, a detection message will be sent to the peer end. Interval Type started. 60~600 The ICMP Packet length include the IP header length. Interval Type 44~1024 44~1024
This parameter specifies the ID of theType Interval scheduled task to be1~30,100~32767 started. 1~30,100~32767 Indicating whether the UE in Enumeration allowed to access the cell. When the cell status is BARRED, it indicates that the UEs in idle mode are idle mode is Type BARRED, NOT_BARRED BARRED, NOT_BARRED Indicating whether the UE in Enumeration allowed to reselect another intra-frequency cell. This parameter is valid when [Cell barred indicator fo idle mode is Type ALLOWED, NOT_ALLOWED ALLOWED, NOT_ALLOWED The hysteresis value of the serving FDD cells in idle mode in case the quality measurement for cell selection and reselection is set to CPICH RSCP. It is related to the slow fading feature of the area where the cell is located. The greater the slow fading variance is, the greater this parameter. According to the R regulation, the current serving cell involves in cell selection after the measurement value is added with the hysteresis value. The measurement hysteresis aims to prevent the pingpong effect of the cell reselection, which is caused by the slow fading when the UE is on the edge of the cell. The ping-pong effect may trigger frequent location updates (idle mode), URA updates (URA_PCH), or cell updates (CELL_FACH, CELL_PCH), and thus increase the load of network signaling and the Interval Type 0~20 0~40, step:2 consumption of UE
The hysteresis value of the serving FDD cells in idle mode in case the quality measurement for cell selection and reselection is set to CPICH Ec/No. It is related to the slow fading feature of the area where the cell is located. The greater the slow fading variance is, the greater this parameter. It is optional. If it is not configured, [Hysteresis 1] will be adopted as the value. This parameter is not configured when its value is 255. According to the R regulation, the current serving cell involves in cell selection after the measurement value is added with the hysteresis value. The measurement hysteresis aims to prevent the pingpong effect of the cell reselection, which is caused by the slow fading when the UE is on the edge of the cell. The ping-pong effect may trigger frequent location updates (idle mode), URA updates Interval Type (URA_PCH), or cell
0~20,255
{0~40},{255}, step:2
Offset of cell CPICH RSCP measurement value in cell selection or reselection when the UE is in idle mode. Offset of neighboring cell CPICH measurement value. This parameter is used for RSSI measurement. The offset is subtracted from the neighboring cell measurement value before cell reselection. This parameter defines the offset of cell CPICH RSCP measurement value in cell selection or reselection when the UE is in idle mode. In cell reselection algorithm, this parameter is used for moving the border of a cell. This parameter can be configured by the network planner according to reality. NOTE: In FDD mode, this parameter is valid only when SIB11 Indicator is set as TRUE. For details, refer to 3GPP TS 25.331. Interval Type As for the impact on
-50~50
-50~50
Offset of cell CPICH Ec/No measurement value in cell selection or reselection when the UE is in idle mode. Offset of neighboring cell CPICH measurement value This parameter is used for Ec/No measurement. The offset is subtracted from the neighboring cell measurement value before cell reselection. In cell reselection algorithm, this parameter is used for moving the border of a cell. This parameter can be configured by the network planner according to reality. NOTE: In FDD mode this parameter is valid only when SIB11 Indicator is set as TRUE. For details, refer to 3GPP TS 25.331. As for the impact on network performance: The larger the value of the parameter, the lower the probability of selecting neighboring cells. The Interval Type -50~50 -50~50 smaller the value the Threshold for inter-frequencyInterval Type in idle mode. When the quality (CPICH Ec/No measured by UE) of the serving cell is lower than t cell reselection -16~10,127 {-32~20},{127}, step:2 Threshold for intra-frequencyInterval Type in idle mode. When the quality (CPICH Ec/No measured by the UE) of the serving cell is lower th cell reselection -16~10,127 {-32~20},{127}, step:2 This parameter is valid when Enumeration indicator for SIB3] is D20, D40, D80, D160, that 20,D640, D1280320,can be measured next time when [Cell barred Type D10, BARRED. It indicates D320, 40, 80, 160, cell 640, 1280 10, the delay of the UNI: 10000~30000 NNI: 100~30000 Interval for sending the POLL message when no data is transmitted. Interval Type 100~30000 After the coverage based handover succeeds, to avoid the handover of the UE to another frequency due to the following factors: overload, speed Interval Type 0~120 0~120 CN flow control timer (short). The OVERLOAD message 5000~30000 Interval Type received repeatedly in this period will be discarded. 5000~30000
This parameter specifies the number of an IMA group. Interval Type This parameter specifies the IMA ID.Type Interval
0~83 0~255
This parameter specifies the number of an IMA link. Interval Type This parameter specifies the IMA protocol Type Enumeration version. This parameter specifies whether it is allowed to use the initial rate of IMS signaling set on the LMT, that is, the value of [Ims initial rate]. - ON: If the IMS signaling is carried on the DCH, the maximum rate of IMS signaling takes the value of [Ims initial rate]. - OFF: The maximum rate of IMS signaling does not take the value of [Ims initial rate]. Enumeration Type
OFF, ON
OFF, ON
This parameter specifies the channel type of IMS signaling. - DCH: Both uplink and downlink are preferably carried on DCH. - HSDPA: Uplink is preferably carried on DCH, and downlink is preferably carried on HS-DSCH. - HSPA: Uplink is preferably carried on EDCH, and downlink is preferably carried on HSDSCH. Enumeration Type DCH(UL_DCH,DL_DCH), HSDPA(UL_DCH,DL_HSDSCH), HSPA(UL_EDCH,D DCH, HSDPA, HSPA The MAC-c on Iub interface Interval Typeafter the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_F will increase 1~1000 1~1000 UE IMSI ID. String Type 15-bit decimal numerals The maximum of one IMSI range. Type String 15-bit decimal numerals The minimum of one IMSI range. Type String 15-bit decimal numerals
This parameter specifies the initial access rate of IMS signaling. When the [Ims Bear enhanced switch] is ON: - If the IMS signaling is carried on the DCH in the downlink, the initial rate takes the larger value between this parameter and the CN-assigned bit rate. - If the IMS signaling is carried on the HSPA, the MBR takes the larger value between this parameter and the CN-assigned bit rate. Enumeration Type D32, D64 32, 64 Maximum of IMSI route parameter inType Interval IDNNS. 0~999 0~999 Minimum of IMSI route parameter in Type Interval IDNNS. 0~999 0~999 The MAC-c on Iub interface Interval Typeafter the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_F will increase 1~2000 1~2000 If data is not transmitted on the EDCH for Type consecutive D4, D8,TTIs, the interval1,4,8,16,32,64,128,256 patterns are transmitted on the Enumeration several D1, EDCH D16, D32, D64, D128, D256 consecutive at which two This parameter specifies the number of consecutive subframes D1, D2, UE should monitor on each HS-SCCH of the HS-SCCH set immediately Enumeration Type D0, that the D4, D8, D16, D32, D64, D128, D256, D512 0,1,2,4,8,16,32,64,128,256,512 This parameter specifies the number of subframes that the D0, should monitor on the E-AGCH of the serving radio link and on the E-RGCH of e Enumeration Type UE D1, D2, D4, D8, D16, D32, D64, D128, D256 0,1,2,4,8,16,32,64,128,256 This parameter specifies whether the alarmType Enumeration reporting for infrared sensor is enabled. CLOSE(Close), OPEN(Open) CLOSE,OPEN This parameter specifies the inhibit type (Physical inhibit, LOGIC(Logic inhibit), PHYSICAL(Physical inhibit)PHYSICAL(Physical inhibit) Enumeration Type Logic inhibit). LOGIC(Logic inhibit), Maximum allowed no-credit time length. Interval Type 1200~2000 1200~2000 The integrity protection algorithm supported by RNC. Only UIA1 is supported currently. each switch of this parameter, the value can be: ON Bit Field Type UIA1 For The MAC-c on Iub interface Interval Typeafter the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_F will increase 1~1000 1~1000 The MAC-c on Iub interface Interval Typeafter the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_F will increase 1~2000 1~2000 MBDR switch. Bit Field Type CSAMR_INTERFREQ(CS AMR inter-frequency switch), CSNONAMR_INTERFRE CSAMR_INTERFREQ,CSNONAMR_INTERFREQ,PS Threshold of signal quality of the target frequency for triggering inter-frequency measurement. This parameter is used to set measurement control on the event 2C. The event 2C is triggered when the signal quality of the target frequency is above this threshold. Interval Type
-24~0
-24~0
Threshold to trigger interfrequency measurement with measurement quantity of Ec/No for CS domain services. The inter-frequency measurement start Ec/No threshold (namely, compressed mode start threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: moving speed of the UE and the cell radius. For CS domain services, when Ec/No is used as the measurement quantity for inter-frequency measurement, the RNC sends the signaling to activate compressed mode and start inter-frequency measurement, if the UE reports event 2D when the measured value is smaller than the value of this
Interval Type
-24~0
-24~0
Threshold to trigger interfrequency measurement with measurement quantity of RSCP for CS domain services. The inter-frequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the moving speed of the UE and the cell radius. For CS domain services, when Ec/No is used as the measurement quantity for inter-frequency measurement, the RNC sends the signaling to activate compressed mode and start inter-frequency measurement, if the UE reports event 2D when the measured value is smaller
Interval Type
-115~-25
-115~-25
Threshold to stop interfrequency measurement with measurement quantity of Ec/No for CS domain services. The inter-frequency measurement stop Ec/No threshold (namely, compressed mode stop threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: moving speed of the UE and the cell radius. For CS domain services, when Ec/No is used as the measurement quantity for inter-frequency measurement, the RNC sends the signaling to stop the compressed mode and the inter-frequency measurement, if the UE reports event 2F when the measured value is larger than the value of this
Interval Type
-24~0
-24~0
Threshold to stop interfrequency measurement with measurement quantity of RSCP for CS domain services. The inter-frequency measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the moving speed of the UE and the cell radius. For CS domain services, when Ec/No is used as the measurement quantity for inter-frequency measurement, the RNC sends the signaling to stop the compressed mode and the inter-frequency measurement, if the UE reports event 2F when the Interval Type -115~-25 -115~-25 measured value is larger This parameter is the relativeInterval Typecell for judging whether downlink MBDR algorithm of inter frequency is in overload state. It represen threshold of 0~100 0~100
L3 filtering coefficient for the inter-frequency measurement. The physical meaning of this parameter is the same as the measurement model and intra-frequency measurement. The difference is that the report period for the interfrequency measurement is 480 ms, whereas the report period for the intrafrequency measurement is 200 ms. In practice, it can be adjusted according to traffic performance measurement. The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-fast-fading capability, but the lower the signal change tracing capability. If the value of this parameter is set too small, unnecessary hard handover or frequently changed handover may occur.
Enumeration Type
D0, D1, D2, D3, D4, D5, D6,0,1,2,3,4,5,6,7,8,9,11,13,15,17,19 D19 D7, D8, D9, D11, D13, D15, D17,
According to the cell interfrequency hierarchical selection, the RNC chooses the proper inter-frequency measurement control parameters to implement coverage, speed estimation, and traffic absorption. INTER_FREQ_COV: coverage-based interfrequency handover. INTER_FREQ_COV_NCO V: coverage-based interfrequency handover, and non-coverage-based interfrequency handover triggered by speed estimation. INTER_FREQ_TA: trafficbased inter-frequency handover, which includes the function similar to coverage-based interfrequency handover. Enumeration Type
Threshold to trigger interfrequency measurement with measurement quantity of Ec/No for PS domain HSPA services. The inter-frequency measurement start Ec/No threshold (namely, compressed mode start threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: moving speed of the UE and the cell radius. For HSPA services, when Ec/No is used as the measurement quantity for inter-frequency measurement, the RNC sends the signaling to activate the compressed mode and start interfrequency measurement, if the UE reports event 2D when the measured value is Interval Type smaller than the value of
-24~0
-24~0
Threshold to trigger interfrequency measurement with measurement quantity of RSCP for PS domain HSPA services. The inter-frequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the moving speed of the UE and the cell radius. For HSPA services, when Ec/No is used as the measurement quantity for inter-frequency measurement, the RNC sends the signaling to activate the compressed mode and start interfrequency measurement, if the UE reports event 2D Interval Type when the measured value is
-115~-25
-115~-25
Threshold to stop interfrequency measurement with measurement quantity of Ec/No for PS domain HSPA services. The inter-frequency measurement stop Ec/No threshold (namely, compressed mode stop threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: moving speed of the UE and the cell radius. For HSPA services, when Ec/No is used as the measurement quantity for inter-frequency measurement, the RNC sends the signaling to stop the compressed mode and the inter-frequency measurement, if the UE reports event 2F when the measured value is larger than the value of this
Interval Type
-24~0
-24~0
Threshold to stop interfrequency measurement with measurement quantity of RSCP for PS domain HSPA services. The inter-frequency measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the moving speed of the UE and the cell radius. For HSPA services, when Ec/No is used as the measurement quantity for inter-frequency measurement, the RNC sends the signaling to stop the compressed mode and the inter-frequency measurement, if the UE reports event 2F when the Interval Type -115~-25 -115~-25 measured value is larger Indicating whether the inter-frequency/RAT measurement NOT_REQUIRE, INTER_FREQ, INTER_RAT,the system information. When a UE Enumeration Type control information should be delivered through INTER_FREQ_AND_INTER_RAT NOT_REQUIRE,INTER_FREQ,INTER_RAT,INTER_
Measurement quantity used in measurement-based interfrequency DRD in event (2C) triggered or periodical reporting mode. - CPICH: Common Pilot Channel - Ec/No: Signal-to-Noise Ratio - RSCP: Received Signal Code Power - CPICH_Ec/No: to use the Ec/No measurement quantity for event 2C or Inter-Frequency periodical measurement. The physical unit is dB. - CPICH_RSCP: to use the RSCP measurement quantity for event 2C or Inter-Frequency periodical measurement. The physical unit is dBm. - BOTH:both quantities of the target cell must be satisfied when performing the handover judgement.Valid when the Inter-Frequency measurement chooses PERIODICAL_REPORTI NG Mode. Recommended value (default value): Enumeration Type BOTH(PERIODICAL_RE
Timer length for interfrequency measurement. After inter-frequency measurement starts, if no inter-frequency handover is performed when this timer expires, the inter-frequency measurement and the compressed mode (if started) are stopped. The value 0 indicates the timer is not to be enabled. This parameter is used to prevent the long interfrequency measurement state (compressed mode) due to unavailable measurement of the target cells that meet the handover requirements. Setting the value of this parameter smaller can reduce the long-time impact of the compressed mode on the serving cell. In this case, however, the compressed mode might be stopped earlier and as a result the UE cannot trigger inter-frequency handover. For the coverage-based inter-frequency handover, call drops may occur. Interval Type 0~512 When it is checked, system supports inter-frequency neighboring detect function. Enumeration Type OFF, ON Threshold of signal quality of the target frequency for triggering inter-frequency measurement. This parameter is used to set measurement control on the event 2C. The event 2C is triggered when the signal quality of the target frequency is above this threshold. Interval Type
0~512 OFF,ON
-24~0
-24~0
Threshold to trigger interfrequency measurement with measurement quantity of Ec/No for PS domain non-HSPA services. The inter-frequency measurement start Ec/No threshold (namely, compressed mode start threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: moving speed of the UE and the cell radius. For PS domain services, when Ec/No is used as the measurement quantity for inter-frequency measurement, the RNC sends the signaling to activate the compressed mode and start interfrequency measurement, if the UE reports event 2D when the measured value is Interval Type smaller than the value of
-24~0
-24~0
Threshold to trigger interfrequency measurement with measurement quantity of RSCP for PS domain nonHSPA services. The inter-frequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the moving speed of the UE and the cell radius. For PS domain services, when Ec/No is used as the measurement quantity for inter-frequency measurement, the RNC sends the signaling to activate the compressed mode and start interfrequency measurement, if the UE reports event 2D Interval Type when the measured value is
-115~-25
-115~-25
Threshold to stop interfrequency measurement with measurement quantity of Ec/No for PS domain non-HSPA services. The inter-frequency measurement stop Ec/No threshold (namely, compressed mode stop threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: moving speed of the UE and the cell radius. For PS domain services, when Ec/No is used as the measurement quantity for inter-frequency measurement, the RNC sends the signaling to stop the compressed mode and the inter-frequency measurement, if the UE reports event 2F when the measured value is larger than the value of this
Interval Type
-24~0
-24~0
Threshold to stop interfrequency measurement with measurement quantity of RSCP for PS domain nonHSPA services. The inter-frequency measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the moving speed of the UE and the cell radius. For PS domain services, when Ec/No is used as the measurement quantity for inter-frequency measurement, the RNC sends the signaling to stop the compressed mode and the inter-frequency measurement, if the UE reports event 2F when the Interval Type measured value is larger
-115~-25
-115~-25
Cell-level switch for interfrequency and inter-RAT handover. INTERFREQ: only measuring inter-frequency cells and performing interfrequency handover. INTERRAT: only measuring GSM cells and performing inter-RAT handover . SIMINTERFREQRAT: measuring both interfrequency and inter-RAT cells, performing interfrequency or inter-RAT handover according to the type of the cell that first meets the handover decision condition. The parameter decides the handover for each cell when the inter-frequency and inter-RAT cells coexist. Enumeration Type
Inter-frequency measurement report mode. PERIODICAL_REPORTI NG: periodical interfrequency measurement report EVENT_TRIGGER: eventtriggered inter-frequency measurement report There are two interfrequency handover report modes in the RNC, namely, event-triggered measurement report and periodical measurement report. The report mode is selected by setting the interfrequency report mode switch that is RNCoriented. - Event-triggered measurement report Use event 2B to decide whether to trigger interfrequency handover. This prevents the ping-pong effect from occurring before and after interfrequency handover (The quality of the currently used frequency is lower than the absolute threshold "used frequency quality Enumeration Type PERIODICAL_REPORTING(Periodical reporting), EVENT_TRIGGER(Event trigg PERIODICAL_REPORTING,EVENT_TRIGGER threshold", and the quality This parameter is used to increase time of inter-freqency reselection. It is not configured when its value is 255. For detailed inforamtion, refer to Interval Type 4~19,255 {1~4.75},{255}, step:0.25 This parameter is the relativeInterval Typecell for judging whether uplink MBDR algorithm of inter frequency is in overload state. It represents threshold of 0~100 0~100 This parameter specifies whether inter-RAT handover of the UE among different operators is allowed. Enumeration Type NO, YES NO,YES This parameter specifies whether intra-RAT handover of the UE among different operators is allowed. Enumeration Type NO, YES NO,YES MBDR switch. Bit Field Type CSAMR_INTERRAT(CS AMR inter-RAT switch) CSAMR_INTERRAT
Threshold to trigger interRAT measurement with measurement quantity of Ec/No for CS domain services. The inter-RAT measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key parameters in the inter-RAT handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the speed of the UE and the cell radius. For CS domain services, when Ec/No is used as the measurement quantity for inter-RAT measurement, the RNC sends the signaling to activate compressed mode and start inter-RAT measurement, if the UE reports event 2D when the measured value is smaller than the value of Interval Type this parameter.
-24~0
-24~0
Threshold to trigger interRAT measurement with measurement quantity of RSCP for CS domain services. For CS domain services, when RSCP is used as the measurement quantity for inter-RAT measurement, the RNC sends the signaling to activate compressed mode and start inter-RAT measurement, if the UE reports the event 2D when the measured value is smaller than the value of this parameter. If you want to start the compressed mode earlier, set the threshold for event 2D larger. Otherwise, set the threshold for event 2D smaller; if you want to reduce the ping-pong effect of starting and stopping the compressed mode, set the difference between events 2D and 2F larger. In most cases, UEs want to be maintained within a 3G network. Thus, the start threshold of the inter-RAT measurement is set smaller Interval Type than that of the inter-
-115~-25
-115~-25
Threshold to stop interRAT measurement with measurement quantity of Ec/No for CS domain services. The inter-RAT measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the inter-RAT handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the speed of the UE and the cell radius. For CS domain services, when Ec/No is used as the measurement quantity for inter-frequency measurement, the RNC sends the signaling to stop the compressed mode and the inter-frequency measurement, if the UE reports event 2F when the measured value is larger Interval Type -24~0 -24~0 than the value of this Threshold to stop interRAT measurement with measurement quantity of RSCP for CS domain services. For CS domain services, when RSCP is used as the measurement quantity for inter-RAT measurement, the RNC sends the signaling to deactivate compressed mode and stop inter-RAT measurement, if the UE reports the event 2F when the measured value is larger than the value of this parameter. Interval Type -115~-25 -115~-25 This parameter is the relativeInterval Typecell for judging whether downlink MBDR algorithm of inter RAT is in overload state. It represents th threshold of 0~100 0~100
L3 filtering coefficient for inter-RAT measurement. The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-fast-fading capability, but the lower the signal change tracing capability. If the value of this parameter is set too small, unnecessary intersystem handovers may occur. The parameter has the same physical meaning and measurement model as the inter-frequency measurement L3 filter coefficient. The report period is 480 ms. For specific analysis, refer to the intra-frequency measurement layer 3 filter coefficients and interfrequency measurement layer 3 filter coefficients. The recommended values of the inter-RAT measurement layer 3 filter coefficients in different cells are as follows: -In cells where the average moving speed of UEs is Enumeration Type D0, D1, D2, D3, D4, D5, D6,0,1,2,3,4,5,6,7,8,9,11,13,15,17,19 D19 D7, D8, D9, D11, D13, D15, D17, low, there is a The maximum number of attempts to perform noncoverage-based inter-RAT handovers. This parameter specifies the maximum number of attempts for the RNC to perform inter-RAT handovers after a noncoverage-based inter-RAT handover failure. The handover attempts should involve the target cells that have not been tried but satisfy the handover conditions. Interval Type 1~16 1~16 This parameter specifies whether the inter-RAT handover,NO,example, to the GSM network, is performed when the RNC cannot meet the accur Enumeration Type for YES NO, YES
Quality requirement for the inter-RAT cell during an inter-RAT handover with CS domain services. This parameter is used to set measurement control on the event 3C. The event 3C is triggered when the signal quality of the target frequency is above this threshold. Note that the value 0 indicates that the physical value is smaller than -110 dBm. If the periodical report mode is used, the interRAT handover decision thresholds are used for the assessment of inter-RAT coverage handover, namely as Tother_RAT in the following formulas. The inter-RAT handover decision thresholds are the absolute thresholds (RSSI) of inter-RAT cell quality for the inter-RAT handover decision. If the quality of another RAT in the inter-RAT measurement report meets the following condition: Mother_RAT + CIO >= Interval Type 0~63 lower than -110, -110~-48(1:-110; 2:-109; ...; 63:-48 ) Tother_RAT + H/2 This parameter specifies the type of inter-RAT handover that is performed when the RNC cannot meet the accuracy requirements of the emerge Enumeration Type DRD, MEAS_BASED DRD, MEAS_BASED
Threshold to trigger interRAT measurement with measurement quantity of Ec/No for HSDPA services. The inter-frequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key parameters in the inter-RAT handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the speed of the UE and the cell radius. For HSDPA services, when Ec/No is used as the measurement quantity for inter-RAT measurement, the RNC sends the signaling to activate compressed mode and start inter-RAT measurement, if the UE reports event 2D when the measured value is smaller than the value of this parameter. Interval Type For the UE moving at the
-24~0
-24~0
Threshold to trigger interRAT measurement with measurement quantity of RSCP for HSDPA services. For non-HSDPA services, when RSCP is used as the measurement quantity for inter-RAT measurement, the RNC sends the signaling to activate compressed mode and start inter-RAT measurement, if the UE reports the event 2D when the measured value is smaller than the value of this parameter. If you want to start the compressed mode earlier, set the threshold for event 2D larger. Otherwise, set the threshold for event 2D smaller; if you want to reduce the ping-pong effect of starting and stopping the compressed mode, set the difference between events 2D and 2F larger. In most cases, UEs want to be maintained within a 3G network. Thus, the start threshold of the inter-RAT measurement is set smaller than that of the interInterval Type frequency measurement.
-115~-25
-115~-25
Threshold to stop interRAT measurement with measurement quantity of Ec/No for HSDPA services. The inter-RAT measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the inter-RAT handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the speed of the UE and the cell radius. For HSPA services, when Ec/No is used as the measurement quantity for inter-frequency measurement, the RNC sends the signaling to stop the compressed mode and the inter-frequency measurement, if the UE reports event 2F when the measured value is larger than the value of this Interval Type parameter. Threshold to stop interRAT measurement with measurement quantity of RSCP for HSDPA services. For HSDPA services, when RSCP is used as the measurement quantity for inter-RAT measurement, the RNC sends the signaling to deactivate compressed mode and stop inter-RAT measurement, if the UE reports the event 2F when the measured value is larger than the value of this parameter. Interval Type
-24~0
-24~0
-115~-25
-115~-25
Timer length for inter-RAT measurement. After inter-RAT measurement starts, if no inter-RAT handover is performed when this timer times out, the inter-RAT measurement is stopped. In addition, the compressed mode is deactivated, if any; If the value is 0, you can infer that the inter-RAT measurement timer is not started. To set this parameter, you need to consider the following factors: This parameter aims to prevent that the handover conditions are not met and the compressed mode is kept for a long time when the UE does not move or is moving in a low speed. The service quality is adversely affected and the total available capacity decreases if the compressed mode is kept for a long time. Most inter-RAT handovers can be finished within 60 s. As for the impact on network performance, Interval Type 0~512 If the InterRATMeasTime When it is checked, system supports inter-rat neighboring detectON Enumeration Type OFF, function.
0~512 OFF,ON
Quality requirement for the inter-RAT cell during an inter-RAT handover with CS domain services. This parameter is used to set measurement control on the event 3C. The event 3C is triggered when the signal quality of the target frequency is above this threshold. Note that the value 0 indicates that the physical value is smaller than -110 dBm. If the periodical report mode is used, the interRAT handover decision thresholds are used for the assessment of inter-RAT coverage handover, namely as Tother_RAT in the following formulas. The inter-RAT handover decision thresholds are the absolute thresholds (RSSI) of inter-RAT cell quality for the inter-RAT handover decision. If the quality of another RAT in the inter-RAT measurement report meets the following condition: Mother_RAT + CIO >= Interval Type Tother_RAT + H/2
0~63
Quality requirement for the inter-RAT cell during an inter-RAT handover with PS domain services. This parameter is used to set measurement control on the event 3C. The event 3C is triggered when the signal quality of the target frequency is above this threshold. Note that the value 0 indicates that the physical value is smaller than -110 dBm. If the periodical report mode is used, the interRAT handover decision thresholds are used for the assessment of inter-RAT coverage handover, namely as Tother_RAT in the following formulas. The inter-RAT handover decision thresholds are the absolute thresholds (RSSI) of inter-RAT cell quality for the inter-RAT handover decision. If the quality of another RAT in the inter-RAT measurement report meets the following condition: Mother_RAT + CIO >= Interval Type Tother_RAT + H/2
0~63
Interval that the UE reports inter-RAT measurement results to the RNC. In periodical report mode, the interval between two reports is the configured value. That is, the UE submits reports at intervals of the configured time. The value "NON_PERIODIC_REPO RT" is, however, not recommended. In this setting, the UE behavior is not defined. Because the GSM RSSI measurement period is 480 ms, the inter-RAT periodical report interval should be longer than 480 ms. If InterPeriodReportInterval is excessively high, the handover judging time will be long, and handovers will be slower. The InterPeriodReportInterval is adjusted according to the configured GSM RSSI measurement compressed mode sequence. According to the current configured Enumeration Type GSM RSSI measurement Threshold of Inter-RAT handover failure due to physical channel failure. When the times of InterRAT handover failures due to physical channel failure exceeds the threshold, UE will be turned into penalty state. And no try of InterRat handover will be taken until penalty finishes. Also see parameter PenaltyTimeForInterRatPhy ChFail. Interval Type
0~63
0~63
Inter-RAT ping-pong hysteresis. When a UE in the CS domain is handed over from a 2G network to a 3G network, the system increase 3A Hysteresis to prevent UE ping-pong handover between the 2G network and the 3G network in the period specified by this parameter. During the penalty time, the previous periodical report will be changed to the event 3A report. If this parameter is 0,the system will not start the ping-pong handover punish timer. Interval Type Inter-RAT ping-pong timer. When a UE in the CS domain is handed over from a 2G network to a 3G network, the system increase 3A Hysteresis to prevent UE ping-pong handover between the 2G network and the 3G network in the period specified by this parameter. During the penalty time, the previous periodical report will be changed to the event 3A report. If this parameter is 0,the system will not start the ping-pong handover punish timer. Interval Type
0~15
0~7.5,Step:0.5
0~65535
0~65535
Threshold to trigger interRAT measurement with measurement quantity of Ec/No for PS domain nonHSDPA services. The inter-frequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key parameters in the inter-RAT handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the speed of the UE and the cell radius. For PS domain non-HSDPA services, when Ec/No is used as the measurement quantity for inter-RAT measurement, the RNC sends the signaling to activate compressed mode and start inter-RAT measurement, if the UE reports event 2D when the measured value is smaller Interval Type than the value of this
-24~0
-24~0
Threshold to trigger interRAT measurement with measurement quantity of RSCP for PS domain nonHSDPA services. For PS domain HSDPA services, when RSCP is used as the measurement quantity for inter-RAT measurement, the RNC sends the signaling to activate compressed mode and start inter-RAT measurement, if the UE reports the event 2D when the measured value is smaller than the value of this parameter. If you want to start the compressed mode earlier, set the threshold for event 2D larger. Otherwise, set the threshold for event 2D smaller; if you want to reduce the ping-pong effect of starting and stopping the compressed mode, set the difference between events 2D and 2F larger. In most cases, UEs want to be maintained within a 3G network. Thus, the start threshold of the inter-RAT Interval Type measurement is set smaller
-115~-25
-115~-25
Threshold to stop interRAT measurement with measurement quantity of Ec/No for PS domain nonHSDPA services. The inter-RAT measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the inter-RAT handover policy. This parameter affects the proportion of the UEs in compressed mode active status of a cell and the success rate of the hard handover. To set this parameter, you need to consider the following factors: the speed of the UE and the cell radius. For PS domain HSPA services, when Ec/No is used as the measurement quantity for inter-frequency measurement, the RNC sends the signaling to stop the compressed mode and the inter-frequency measurement, if the UE reports event 2F when the measured value is larger Interval Type than the value of this Threshold to stop interRAT measurement with measurement quantity of RSCP for PS domain nonHSDPA services. For PS domain non-HSDPA services, when RSCP is used as the measurement quantity for inter-RAT measurement, the RNC sends the signaling to deactivate compressed mode and stop inter-RAT measurement, if the UE reports the event 2F when the measured value is larger than the value of this parameter. Interval Type
-24~0
-24~0
-115~-25
-115~-25
Inter-RAT measurement report mode. When PERIODICAL_REPORTI NG is selected, you can infer that periodical interRAT measurement report is adopted; when EVENT_TRIGGER is selected, you can infer that event-triggered inter-RAT measurement report is adopted. The RNC includes two modes of the inter-RAT measurement report. The event triggered report and the periodical report are selected according to the inter-RAT measurement report mode switch.
-Event-triggered measurement report To avoid the ping-pong effect before and after the inter-RAT handover, event 3A where the currently used frequency quality is lower than the absolute threshold and the signal level of the GSM cell is higher than another absolute threshold Enumeration Type PERIODICAL_REPORTING(Periodical reporting), EVENT_TRIGGER(Event trigg PERIODICAL_REPORTING,EVENT_TRIGGER is the triggering event that This parameter is used to increase time of inter-RAT reselection. It is not configured when its value is 255. For detailed inforamtion, refer to 3G Interval Type 4~19,255 {1~4.75},{255}, step:0.25 This parameter is the relativeInterval Typecell for judging whether uplink MBDR algorithm of inter RAT is in overload state. It represents the p threshold of 0~100 0~100 This parameter specifies the interval for sending packets for starting the EthOAM loopback 10 Interval Type 1~10 1 to test.
This parameter specifies the Ec/No absolute threshold of event 1F in the SHO algorithm, corresponding to the guarantee signal strength with QoS of basic service. The parameter affects the triggering of event 1F. Event 1F is used to trigger the emergency blind handover. If the best cell of the active set reports event 1F, which means that the active cell is very poor quality, then the blind handover is triggered as the last attempt before call drop. The emergency blind handover is a special occasion that requires onsite measurements on the scope of the pilot strength of the best cell at the location where the blind handover is triggered. Generally, this function need not be started, so the parameter is set to the lowest value by default, indicating that the blind handover is not triggered. Interval Type The larger the set value is,
-24~0
-24~0
This parameter specifies the RSCP absolute threshold of event 1F in the SHO algorithm, corresponding to the guarantee signal strength with the QoS of basic service. The parameter affects the triggering of event 1F. Event 1F is used to trigger the emergency blind handover. If the best cell of the active set reports event 1F, which means that the active cell is very poor quality, then the blind handover is triggered as the last attempt before call drop. The emergency blind handover is a special occasion that requires onsite measurements on the scope of the pilot strength of the best cell at the location where the blind handover is triggered. Generally, this function need not be started, so the parameter is set to the lowest value by default, indicating that the blind Interval Type handover is not triggered.
-115~-25
-115~-25
According to the 3GPP TS 25.331, the filtering of the measurement value is calculated using the following formula, where k represents this parameter: Fn = (1 - a) * Fn - 1 + a * Mn Here, Fn: the updated filtered measurement result Fn - 1: the old filtered measurement result Mn: the latest received measurement result from physical layer measurements a = (1/2)(k/2). When a is set to 1, this means L3 filtering will not be applied. L3 filtering should be able to filter as much random impulse as possible. Thus the filtered measurement value can reflect the varying of the actual measurement value. The input measurement value to L3 filter has been filtered by L1 filter, where the impact of fast fading is almost eliminated. So the L3 filtering should apply Enumeration Type smooth filtering to shadow
D0, D1, D2, D3, D4, D5, D6,0,1,2,3,4,5,6,7,8,9,11,13,15,17,19 D19 D7, D8, D9, D11, D13, D15, D17,
Identifying the period of the Intra-frequency load balance algorithm. When the cell load1~86400the cell PCPICH TX power can be periodically Interval Type 1~86400 is high, Indicating whether the intra-frequency measurement control information should be delivered through the system information. Generally the cell Enumeration Type REQUIRE, NOT_REQUIREREQUIRE,NOT_REQUIRE
This parameter specifies the intra-frequency measurement CPICH_EC/NO, CPICH_RSCP measurementCPICH_RSCP UE to report event 1x. Enumeration Type quantity. It defines the reference CPICH_EC/NO, quantity for the When it is checked, system supports intra-frequency neighboring detect function. DETSET_RPRT_SWITCH switch in HoSwitch in SET CORR Enumeration Type OFF, ON OFF,ON Relative threshold of the event 1A. The greater the value of this parameter is, the more easily the event 1A is triggered. Interval Type 0~29 0~14.5, step: 0.5 This parameter specifies the CS non-VP service relative threshold of event 1A. The higher the threshold is, the more easily the event 1A is triggered. The lower the threshold is, the harder the event 1A is triggered. For the definition of event 1A, refer to 3GPP TS 25.331. The relative threshold can directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the SHO area and SHO ratio. For the CDMA system, the ratio of the UE involved in soft handover should reach 30% to 40% to ensure smooth handover. Based on simulation results, when the relative threshold is set to 5 dB, the ratio of the UE involved in soft handover (the number of cells in the active set is at least 2) is Interval Type 0~29 0~14.5,Step:0.5 approximately 35%. It is
This parameter specifies the VP service relative threshold of event 1A. The higher the threshold is, the more easily the event 1A is triggered. The lower the threshold is, the harder the event 1A is triggered. For the definition of event 1A, refer to 3GPP TS 25.331. The relative threshold can directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the SHO area and SHO ratio. For the CDMA system, the ratio of the UE involved in soft handover should reach 30% to 40% to ensure smooth handover. Based on simulation results, when the relative threshold is set to 5 dB, the ratio of the UE involved in soft handover (the number of cells in the active set is at least 2) is approximately 35%. It is recommended to set the Interval Type relative threshold a little
0~29
0~14.5,Step:0.5
This parameter specifies the PS service relative threshold of event 1A. The higher the threshold is, the more easily the event 1A is triggered. The lower the threshold is, the harder the event 1A is triggered. For the definition of event 1A, refer to 3GPP TS 25.331. The relative threshold can directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the SHO area and SHO ratio. For the CDMA system, the ratio of the UE involved in soft handover should reach 30% to 40% to ensure smooth handover. Based on simulation results, when the relative threshold is set to 5 dB, the ratio of the UE involved in soft handover (the number of cells in the active set is at least 2) is approximately 35%. It is Interval Type 0~29 0~14.5,Step:0.5 recommended to set the Relative threshold of the event 1B. The lower the value of 0~29 Interval Type this parameter is, the more easily the event0.5 is triggered. 0~14.5, step: 1B
This parameter specifies the CS non-VP service relative threshold of event 1B. The lower the threshold is, the more easily the event 1B is triggered. The higher the threshold is, the harder the event 1B is triggered. For the definition of event 1B, refer to 3GPP TS 25.331. The relative threshold can directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the SHO area and SHO ratio. For the CDMA system, the ratio of the UE involved in soft handover should reach 30% to 40% to ensure smooth handover. Based on simulation results, when the relative threshold is set to 5 dB, the ratio of the UE involved in soft handover (the number of cells in the active set is at least 2) is approximately 35%. It is Interval Type recommended to set the
0~29
0~14.5,Step:0.5
This parameter specifies the PS service relative threshold of event 1B. The lower the threshold is, the more easily the event 1B is triggered. The higher the threshold is, the harder the event 1B is triggered. For the definition of event 1B, refer to 3GPP TS 25.331. The relative threshold can directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the SHO area and SHO ratio. For the CDMA system, the ratio of the UE involved in soft handover should reach 30% to 40% to ensure smooth handover. Based on simulation results, when the relative threshold is set to 5 dB, the ratio of the UE involved in soft handover (the number of cells in the active set is at least 2) is approximately 35%. It is Interval Type recommended to set the
0~29
0~14.5,Step:0.5
This parameter specifies the PS service relative threshold of event 1B. The lower the threshold is, the more easily the event 1B is triggered. The higher the threshold is, the harder the event 1B is triggered. For the definition of event 1B, refer to 3GPP TS 25.331. The relative threshold can directly affect the ratio of the UE involved in soft handover (SHO ratio). So the threshold should be wisely chosen to achieve smooth SHOs. The value of this parameter determines the SHO area and SHO ratio. For the CDMA system, the ratio of the UE involved in soft handover should reach 30% to 40% to ensure smooth handover. Based on simulation results, when the relative threshold is set to 5 dB, the ratio of the UE involved in soft handover (the number of cells in the active set is at least 2) is approximately 35%. It is Interval Type 0~29 0~14.5,Step:0.5 recommended to set the CN flow control timer (long).Interval Type If the OVERLOAD message15000~120000 in this period, the traffic volume will be increased by a degree. is not received 15000~120000 This parameter specifies the local IP address of an IPoA PVC. IP Address Type 0.0.0.0~255.255.255.255
This parameter specifies the local IP address of the Ethernet port. IP Address Type 0.0.0.0~255.255.255.255 This parameter specifies the next hop IP address. IP Address Type 0.0.0.0~255.255.255.255 Local IP address. It must be addresses configured on RNC-(including interface board's device IP and port IP) . IP Address Type 0.0.0.0~255.255.255.255 It specifies whether to enableEnumeration Type the IP header compression function on the PPP link. No_HC, UDP/IP_HC No_HC(Disable head compress),UDP/IP_HC(Use UDP This parameter specifies whether to enableType head compressionUDP/IP_HCa PPP link. Enumeration the IP No_HC, function of No_HC(Disable head compress),UDP/IP_HC(Use UDP
This parameter specifies the index of Type Interval the secondary IP address for the Ethernet port. 1~5 This parameter specifies whether to bind the logical port. NO, YES Enumeration Type This parameter specifies the logical port number the NodeB IP stack. Interval Type 0~119
This parameter specifies the number of the slot bearing NodeB IP transport. Interval Type 14~27 14 to 27 This parameter specifies the number of the subrack bearing NodeB IP transport. Interval Type 0~5 0 to 5 Indicating whether the Iub interface supports IP hybrid transport. Enumeration Type SUPPORT(Support), NOT_SUPPORT(Not support) SUPPORT, NOT_SUPPORT
This parameter specifies whether an IP address is a primary or secondary IP address. PRIMARY, SECOND Enumeration Type PRIMARY, SECOND Indicating whether the UE allocated with Access Class 0 can be allowed to initiate access to the radio network. The UE judges whether it belong Enumeration Type BARRED, NOT_BARRED BARRED, NOT_BARRED Indicating whether the UE allocated with Access Class 10 BARRED, NOT_BARRED BARRED, NOT_BARRED UE judges whether it belon Enumeration Type can be allowed to initiate access to the radio network.The Indicating whether the UE allocated with Access Class 11 BARRED, NOT_BARRED BARRED, NOT_BARRED UE judges whether it belon Enumeration Type can be allowed to initiate access to the radio network.The Indicating whether the UE allocated with Access Class 12 BARRED, NOT_BARRED BARRED, NOT_BARRED UE judges whether it belon Enumeration Type can be allowed to initiate access to the radio network. The Indicating whether the UE allocated with Access Class 13 BARRED, NOT_BARRED BARRED, NOT_BARRED UE judges whether it belon Enumeration Type can be allowed to initiate access to the radio network.The Indicating whether the UE allocated with Access Class 14 BARRED, NOT_BARRED BARRED, NOT_BARRED UE judges whether it belon Enumeration Type can be allowed to initiate access to the radio network.The Indicating whether the UE allocated with Access Class 15 BARRED, NOT_BARRED BARRED, NOT_BARRED UE judges whether it belon Enumeration Type can be allowed to initiate access to the radio network. The Indicating whether the UE allocated with Access Class 1 can be allowed to initate access to the radio network.The UE judges whether it belongs Enumeration Type BARRED, NOT_BARRED BARRED, NOT_BARRED Indicating whether the UE allocated with Access Class 2 can be allowed to initiate access to the radio network. The UE judges whether it belong Enumeration Type BARRED, NOT_BARRED BARRED, NOT_BARRED Indicating whether the UE allocated with Access Class 3 can be allowed to initiate access to the radio network. The UE judges whether it belong Enumeration Type BARRED, NOT_BARRED BARRED, NOT_BARRED Indicating whether the UE allocated with Access Class 4 can be allowed to initiate access to the radio network. The UE judges whether it belong Enumeration Type BARRED, NOT_BARRED BARRED, NOT_BARRED Indicating whether the UE allocated with Access Class 5 can be allowed to initiate access to the radio network. The UE judges whether it belong Enumeration Type BARRED, NOT_BARRED BARRED, NOT_BARRED Indicating whether the UE allocated with Access Class 6 can be allowed to initiate access to the radio network. The UE judges whether it belong Enumeration Type BARRED, NOT_BARRED BARRED, NOT_BARRED Indicating whether the UE allocated with Access Class 7 can be allowed to initiate access to the radio network.The UE judges whether it belong Enumeration Type BARRED, NOT_BARRED BARRED, NOT_BARRED Indicating whether the UE allocated with Access Class 8 can be allowed to initiate access to the radio network.The UE judges whether it belong Enumeration Type BARRED, NOT_BARRED BARRED, NOT_BARRED Indicating whether the UE allocated with Access Class 9 can be allowed to initiate access to the radio network.The UE judges whether it belong Enumeration Type BARRED, NOT_BARRED BARRED, NOT_BARRED This parameter specifies whether the EtherOAM frame carries the flag indicating the active or standby role of a port. Enumeration Type NO, YES NO,YES Is first class transport resource group. Enumeration Type NO, YES NO, YES This parameter specifies whether the MAC-hs window size is fixed. - If this parameter is set to TRUE, the MAC-hs window size is fixed. - If this parameter is set to FALSE, the MAC-hs window size is flexible. Enumeration Type FALSE, TRUE FALSE, TRUE This parameter specifies the flag of the primary operator. "YES" indicates that the license of the primary operator is to be activated, "NO" indica Enumeration Type NO, YES NO,YES This parameter specifies whether to select a QoS path. Enumeration Type NO(NOT QOSPATH), YES(IS QOSPATH) NO,YES To determine whether the node is root node when Transport Type is ATM or ATM_IP. NO, YES Enumeration Type NO, YES
Interface type. Enumeration Type IUB, IUR, IUCS, IUPS IUB,IUR,IUCS,IUPS When the Iu interface is faulty, the RNC gradually restricts cell access in Bar mode. When the Iu interface is restored, the RNC gradually enable Interval Type 1~3600 1~3600 Number of RABs selected in Interval Type release. one DL traffic 0~10 0~10 Number of RABs selected in Interval Type release. one UL traffic 0~10 0~10 A timer to Iu CS Release protection. Type Interval 1~65535 1~65535 A timer to Iu PS Release protection. Type Interval 1~65535 1~65535
Indicating whether to supportEnumeration Type over Iur interface of the neighboring RNC. ON congestion control OFF, ON OFF, Indicating whether to config neighbouring Type DSP index. Enumeration RNC's TRUE, FALSE TRUE, FALSE Indicating whether to supportEnumerationIur interface of the neighboring RNC. Hsdpa over Type OFF, ON OFF, ON Indicating whether to supportEnumerationIur interface of the neighboring RNC. Hsupa over Type OFF, ON OFF, ON Iu signaling connection identifier allocated by RNC for the user. Interval Type 0~16777215 0~16777215 Iu State Policy For RncPool. Enumeration Type NONE, IUCS, IUPS, IUCS_IUPS NONE,IUCS,IUPS,IUCS_IUPS This parameter specifies the expected RX type of J0. The setting of the expected 64byteNULL, 1 byte, 16 byte, 64 that of the TX byte at the peer Enumeration Type NULL, 1byte, 16byte, RX byte must be consistent with byte This parameter specifies the expected RX value of J0. The-setting of the expected RX byte must be consistent with that of the TX byte at the pee String Type None This parameter specifies the TX type of J0. The setting of the TX byte must be consistent with that of the expectedbyte byte at the peer end. Enumeration Type NULL, 1byte, 16byte, 64byteNULL, 1 byte, 16 byte, 64 RX This parameter specifies the TX value of J0. The setting of- the TX byte must be consistent with that of the expected RX byte at the peer end. String Type None This parameter specifies the expected RX type of J1. The setting of the expected 64byteNULL,1byte,16byte,64byte of the TX byte at the peer Enumeration Type NULL, 1byte, 16byte, RX byte must be consistent with that This parameter specifies the expected RX value of J1. The-setting of the expected RX byte must be consistent with that of the TX byte at the pee String Type None This parameter specifies the TX type of J1. The setting of the TX byte must be consistent with that of the expectedbyte byte at the peer end. Enumeration Type NULL, 1byte, 16byte, 64byteNULL, 1 byte, 16 byte, 64 RX This parameter specifies the TX value of J1. The setting of- the TX byte must be consistent with that of the expected RX byte at the peer end. String Type None
This parameter specifies the expected J2 RX type. The setting of the expected RX byte must be 16 byte, 64with that of the TX byte at the peer en Enumeration Type NULL, 16byte, 64byte NULL, consistent byte
1~15 characters
This parameter specifies the J2 TX type. The setting of theNULL, 16byte,be consistent with that ofbyte,expected RX byte at the peer end. Enumeration Type TX byte must 64byte NULL, 16 the 64 byte
This parameter specifies the J2 transmit value. String Type None This parameter specifies whether the K2 byte has the bidirectional/unidirectional end orNOT-INDICATE-END, INDICATE-END Enumeration Type NOT-INDICATE-END, INDICATE-END not. UNI: 1000~3000 NNI: 100~1200 Timer of waiting for STAT response from the peer end. 100~1200,1000~3000 Interval Type
This parameter specifies whether the check is a key detect.NO, YES Enumeration Type If the check is a key detect, the check result may affect the fault handling of the port. YES,NO The Period of KPI Alarm Check,it's the times of KPI report period.D3, D4, D5, D6, D7,D1,D2,D3,D4,D5,D6,D7,D8,D9,D10 Enumeration Type D1, D2, D8, D9, D10 RRC Report KPI Alarm Switch. Enumeration Type OFF, ON OFF, ON
Identifying a location area code for a PLMN. It is defined by the operator. For detailed information of this parameter, refer to 3GPP TS 23.003. Interval Type 1~65533,65535 {1~65533}, {65535} This parameter specifies the antenna latitude of the GPS reference receiver. The latitude is expressed 90000000 of degree:minute:second. Interval Type -90000000~90000000 -90000000 to in the form This parameter specifies the antenna latitude of the GPS reference receiver. The latitude is expressed in the form of degree:minute:second. String Type -90:00:00.000~90:00:00.000 This parameter specifies the period ofType Interval measuring delay. 1~100 100~10000 step:100 This parameter specifies the number of periods that delay adjustment suspends. Interval Type 0~100 0~100 This parameter specifies the threshold of rate down delay. 0~10000 Interval Type 0~10000 This parameter specifies the filter mantissa of average delay decrease. Interval Type 0~15 0~15 This parameter specifies the filter mantissa of average delay increase. Interval Type 0~15 0~15 This parameter specifies the type of link that carries the low-endIMA, FRAATM, connection.IMA, FRAATM, NCOPT Enumeration Type UNI, VPL/VCL cross NCOPT UNI, Length of smoothing filter window ofType Interval intra-frequency load1~32 balancing (LDB). This parameter specifies which choice the load balancing DRD algorithm will be applied. - Power: Power(Downlink none-HSDPA power is used for services carried on DCH, and downlink HSDPA guarantee power is used for services carried on HS-DSCH)will be applied to the load balancing DRD algorithm. - UserNumber: User number(Downlink R99 equivalent user number is used for services carried on DCH, and downlink HSDPA user number is used for services carried on HS-DSCH)will be applied to the the load balancing DRD algorithm. Enumeration Type 1~32
UserNumber, Power
Power, UserNumber
This parameter specifies the downlink load threshold to trigger load balancing DRD for 0~100 carried on DCH. The load balancing DRD will Interval Type 0~100 services
This parameter specifies the downlink load threshold to trigger load balancing DRD for 0~100 carried on HS-DSCH. The load balancing DRD Interval Type 0~100 services This parameter specifies the threshold of remanent load offset between the current cell and the target cell when load balancing DRD is applied f Interval Type 0~100 0~100 This parameter specifies the threshold of remanent load offset between the current cell and the target cell when load balancing DRD is applied f Interval Type 0~100 0~100 This parameter specifies whether the load balancing DRD algorithm will be applied for services carried on DCH. - ON: The load balancing DRD algorithm will be applied.(If cell-level DRD parameters are configured, the status of cell level Load balance DRD switch for DCH should also be considered.) - OFF: The load balancing DRD algorithm will not be applied. Enumeration Type
ON, OFF
ON, OFF
This parameter specifies whether the load balancing DRD algorithm will be applied for services carried on HS-DSCH. - ON: The load balancing DRD algorithm will be applied.(If cell-level DRD parameters are configured, the status of cell level Load balance DRD switch for HSDPA should also be considered.) - OFF: The load balancing DRD algorithm will not be applied. Enumeration Type ON, OFF ON, OFF This parameter specifies the threshold of the downlink remanent total power difference between the current cell and the target cell when load ba Interval Type 0~100 0~100 Value range: NODEB_CREDIT_LDR_S WITCH (NodeB Credit LDR Switch), LCG_CREDIT_LDR_SWI TCH (Local Cell Group Credit LDR Switch), LC_CREDIT_LDR_SWIT CH (Local Cell Credit LDR Switch) Content: The values above represent the following algorithms: NODEB_CREDIT_LDR_S WITCH: NodeB credit congestion control algorithm. This is an RNCoriented algorithm. When NodeB creadit load is heavy, the load can be reshuffled through BE service rate reduction, renegotiation of uncontrollable real-time service QoS, and CS/PS inter-RAT handover. LCG_CREDIT_LDR_SWI TCH: Local cell group credit congestion control algorithm. This is an RNCoriented algorithm. When the local cell group creadit load is heavy, the load can Bit Field Type NODEB_CREDIT_LDR_SWITCH(NodeB Credit LDR Switch), LCG_CREDIT_LD NODEB_CREDIT_LDR_SWITCH,LCG_CREDIT_LD be reshuffled through BE FALSE means not considering the code priority during theFALSE(FALSE), TRUE(TRUE)considering the code priority during the code reshuffl Enumeration Type code reshuffling. TRUE means FALSE, TRUE Code resource usage difference threshold. Inter-frequency 0~100 Interval Type handover is triggered when the difference of the resource usage of the current cell an 0~1, step:0.01
If congestion is triggered by multiple resources such as credit and code at the same time, the congestion of resources specified in this parameter is processed with the first priority. IUBLDR refers to processing of LDR action trigged by Iub bandwidth. CREDITLDR refers to processing of LDR action trigged by credit. CODELDR refers to processing of LDR action trigged by code. UULDR refers to processing of LDR action trigged by Uu. Enumeration Type If congestion is triggered by multiple resources such as credit and code at the same time, the congestion of resources specified in this parameter is processed with the fourth priority. IUBLDR refers to processing of LDR action trigged by Iub bandwidth. CREDITLDR refers to processing of LDR action trigged by credit. CODELDR refers to processing of LDR action trigged by code. UULDR refers to processing of LDR action trigged by Uu. Enumeration Type
Identifying the period of the LDR execution. When basic congestion occurs, execution of LDR can dynamically reduce the cell load. The lower the parameter value is, the more frequently the LDR action is executed, which decreases the load quickly. If the parameter value is excessively low, an LDR action may overlap the previous one before the previous result is displayed in LDM. The higher the parameter value is, the more likely this problem can be prevented. If the parameter value is excessively high, the LDR action may be executed rarely, failing to lower the load timely. The LDR algorithm aims to slowly reduce the cell load and control the load below the admission threshold, each LDR action takes a period (for example the inter-RAT load handover needs a delay of about 5 s if the compressed mode is needed), and there is a Interval Type delay for the LDM module If congestion is triggered by multiple resources such as credit and code at the same time, the congestion of resources specified in this parameter is processed with the second priority. IUBLDR refers to processing of LDR action trigged by Iub bandwidth. CREDITLDR refers to processing of LDR action trigged by credit. CODELDR refers to processing of LDR action trigged by code. UULDR refers to processing of LDR action trigged by Uu. Enumeration Type
1~86400
1~86400
If congestion is triggered by multiple resources such as credit and code at the same time, the congestion of resources specified in this parameter is processed with the third priority. IUBLDR refers to processing of LDR action trigged by Iub bandwidth. CREDITLDR refers to processing of LDR action trigged by credit. CODELDR refers to processing of LDR action trigged by code. UULDR refers to processing of LDR action trigged by Uu. Enumeration Type
Path Load EQ threshold Table Index. Type Interval 1~63 Index of the load EQ used byInterval Type the current adjacent node's bronze user. 0~63 Index of the load EQ used byInterval Type the current adjacent node's gold user. 0~63 Index of the load EQ used byInterval Type the current adjacent node's silver user. 0~63
M3UA local entity indexes and M3UA local entity have a 0~118 Interval Type one-to-one correspondence. 0~118 This parameter specifies the status of the alarm mask switch. OFF Enumeration Type ON, ON,OFF This parameter specifies the priority level of an MD. Interval Type 0~7 0 to 7 This parameter specifies the number of the Fractional link 0~31 Interval Type corresponding to the low-end0port. For the AEUa, the number ranges from 0 to 31. Fo to 31 This parameter specifies the logical function type. Enumeration Type UCP, RUCP, UUP, ATM, IPUCP,RUCP,UUP,ATM,IP This parameter specifies the logical function type. UCP:UMTS RNC Control plane Process RUCP:Resource Management and UMTS RNC Control plane Process UUP:UMTS RNC User plane Process Enumeration Type UCP, RUCP, UUP, ATM, IPUCP,RUCP,UUP,ATM,IP This parameter specifies the logic functionType Enumeration type. ATM, IP ATM,IP This parameter specifies the number of the IMA group corresponding to the low-end port.to 83the AEUa, the number ranges from 0 to 31. For th Interval Type 0~83 0 For DL SF threshold to limit CM.Enumeration Type CM indicatorD16, D32, if the D128, D256 When DL SF limit D8, is TRUE, D64, downlink spreading factor is less than or equal to this parameter 8,16,32,64,128,256 When the BE service rate of the UE decreases to the DCCC threshold rate, theD64, however,16, 32, 64, changed to the FACH state because, for Enumeration Type D0, D8, D16, D32, UE, D128, 8, cannot be 128, 144, 256, 384 0, D144, D256, D384 This parameter specifies the lower limit of the alarm. String Type 0~9Characters
This parameter specifies the coding scheme of the line. 1. HDB3 and AMI are applicable to E1 links, and B8ZS and AMI_ZCS are applicable to T1 links. 2. The setting of this parameter should be consistent with that at the peer end.
Enumeration Type
This parameter specifies the number of an E1/T1 link. This parameter specifies the number of a link. For the AEUa or PEUa, the value ranges fr Interval Type 0~167 0 to 167 M3UA_MASTER_MOD, M3UA_SLAVE_MOD (For definitions of the two modes, refer to RFC4666.) Link work mode,Reference to RFC4660. Type Enumeration M3UA_MASTER_MOD, M3UA_SLAVE_MOD
Used for MTP3 link load sharing. SupposeType the number of 1s in the value is expressed B0100, B0101,the maximum B0100, B0101, B0110, B Enumeration that B0000, B0001, B0010, B0011, as n. B0001, B0010, B0011, number of B1001, B1010 B0000, Then the B0110, B0111, B1000, the MTP3 lin This parameter specifies the frame structure. The setting of this parameter should be consistent with that at the peer end. Enumeration Type E1_DOUBLE_FRAME(E1_DOUBLE_FRAME), E1_CRC4_MULTI_FRAME(E1_C E1_DOUBLE_FRAME, E1_CRC4_MULTI_FRAME, T
This parameter specifies the type of a VCL. Enumeration Type SAALLNK, AAL2PATH, IPOAPVC SAALLNK, AAL2PATH, IPOAPVC This parameter specifies the local IP address. IP Address Type 0.0.0.0~255.255.255.255 This parameter specifies the local IP address for the MLPPP group. IP Address Type 0.0.0.0~255.255.255.255 This parameter specifies the source IP address of the IP loopback test. IP Address Type 0.0.0.0~255.255.255.255
Uniquely identifying a local cell. For detailed information 0~268435455 Interval Type of this parameter, refer to 3GPP TS 25.401. 0~268435455 First local IP address. 0 indicates an invalid value. IP Address Type 0.0.0.0~255.255.255.255 Second local IP address. 0 indicates an invalid value. IP Address Type 0.0.0.0~255.255.255.255 Local port of the SCTP link. Interval Type 1024~65535 1024~65535 This parameters specifies theEnumeration Type board is started. load key when the LFB(Load from BAM and write flash), CL(Consult Load) LFB,CL This field indicate whether the SCTP link is bound with logic port. Enumeration Type NO, YES NO, YES No. of the logic port of the SCTP Link. Interval Type 0~119 0~119 Slot No. of the logic port of the SCTPType Interval link. 14~27 14~27 This parameter specifies the antenna longitude of the GPS -180000000~180000000longitude is expressed in the form of degree:minute:second. Interval Type reference receiver. The -180000000 to 180000000 This parameter specifies the antenna longitude of the GPS -reference receiver. The latitude is expressed in the form of degree:minute:second. String Type -180:00:00.000~180:00:00.000
This parameter specifies the loopback type. Enumeration Type NO_LOOP(No loop), REMOTE_LOOP(Remote loop), LOCAL_LOOP(Local loop) NO_LOOP, REMOTE_LOOP, LOCAL_LOOP This parameter specifies the number of periods that packet0~100 adjustment suspends. Interval Type loss rate 0~100 This parameter specifies the number of the optical port corresponding to the low-end port.to 3 Interval Type 0~3 0
0~119 AEUa (0~191) 0~127 is Leaf logical port,128~191 is Hub logical port. AOUa (0~383) 0~255 is Leaf logical port,256~383 is Hub logical port. UOIa (0~447) 0~383 is Leaf logical port,384~447 is Hub logical port. This parameter specifies the number of a logical port. Interval Type 0~447 Slot No. of the IP logic port of the IP Type Interval Path. 14~27 14~27 This parameter specifies the type of the logical port. Only the logical port on the leaf node can carry the SAAL link, AAL2 path, and IPoA PVC Enumeration Type Hub, Leaf Hub, Leaf This parameter specifies whether to select all the E1/T1 links carried on the board or a single link. link) Enumeration Type ALL(Select all links), SINGLE(Select one ALL, SINGLE
0~119
This parameter specifies whether to select all the E1/T1 links carried on a links), PORT(Select links carried on SINGLE(Select one link)link. Enumeration Type ALL(Select all board, all the ALL, PORT, SINGLE a port, or a single E1/T1 E1/T1 one port links), This parameter specifies the number of the slot in which the low-end port carries the VPL/VCL cross connection. Interval Type 14~27 14 to 27 This parameter specifies the number of the subrack whose 0~5 Interval Type low-end port carries the VPL/VCL cross connection. 0 to 5 This parameter specifies the number of the UNI link corresponding to the low-end port. 0 to 167AEUa, the number ranges from 0 to 31. For the Interval Type 0~167 For the This parameter specifies the VCI of the low-end VCL. Interval Type 32~65535 32 to 65535 This parameter specifies the VPI of the low-end VPL/VCL. For the VPL is cross connected,255 cannot be 0. Interval Type 0~255 0 to VPI This parameter specifies the number of the M3UA service 1024~65535 Interval Type listening port. 1024~65535 This parameter defines the times of retransmission of paging messages. If the times of retransmission exceeds the value of this parameter, retran Interval Type 0~2 0~2 This parameter specifies the DTX cycle at Type Enumeration the MAC layer D1, D4, D5, D8, D10, D16, D20 EDCH inactivity. For details, refer to the 3GPP TS when the MAC layer supports UL 1,4,5,8,10,16,20 This parameter specifies the period during Type the EDCH is D2, activated. After the EDCH is activated,D512, INFINITY Enumeration which D1, not D4, D8, D16, D32, D64, D128, D256, data can be transmitted on the EDCH 1,2,4,8,16,32,64,128,256,512,INFINITY This parameter specifies the maximum size of PDUs transmitted at the MAC layer when the UE is in the CELL_FACH state in the L2 enhanced Interval Type 4~1504 4~1504 This parameter specifies the maximum size of PDUs transmitted at the MAC layer when the UE is in the CELL_DCH state in the L2 enhanced Interval Type 4~1504 4~1504
0~299
0 to 299
SAAL, SCTP. For detailed information of Type Enumeration this parameter, refer to 3GPP TS 25.430. ), SCTP(SCTP Link Type) SAAL(SAAL Link Type SAAL, SCTP This parameter specifies the name of an MA. String Type 1 to 20 characters
Service mapping strategy switch. 1) MAP_HSUPA_TTI_2MS_ SWITCH: When the switch is on, 2 ms TTI is supported for HSUPA. 2) MAP_INTER_RAT_PS_IN _CHANLE_LIMIT_SWIT CH: When the switch is on, the PS services are transmitted on the DCH during the 2G-to-3G handover. When the switch is not on, the PS services can be transmitted on suitable channels according to the algorithm parameter configured for the RNC during the 2G-to-3G handover. 3) MAP_PS_BE_ON_E_FAC H_SWITCH: When the switch is on, the PS BE services can be transmitted on the E-FACH. 4) MAP_PS_STREAM_ON_ E_FACH_SWITCH: When the switch is on, the PS streaming services can be Bit Field Type MAP_HSUPA_TTI_2MS_SWITCH, MAP_INTER_RAT_PS_IN_CHANLE_LIMIT MAP_HSUPA_TTI_2MS_SWITCH, MAP_INTER_RA transmitted on the E-FACH. SRNTI mask to be reset. Enumeration Type B1, B2, B3, B4, B5, B6, B7, B1,B2, B3,B4, B5,B6, B7,B8,B14, B15,B11, B12, B13, B8, B9, B10, B11, B12, B13, B9,B10, B16, B17, B18 This parameter specifies the subnet maskType board. IP Address of the 0.0.0.0~255.255.255.255 This parameter specifies the subnet maskType PPP link.IP Address for the 0.0.0.0~255.255.255.255 This parameter specifies the subnet maskType MLPPP group. IP Address for the 0.0.0.0~255.255.255.255 This parameter specifies the subnet maskType Ethernet port. IP Address of the 0.0.0.0~255.255.255.255 This parameter specifies the subnet maskType EMS. IP Address of the 0.0.0.0~255.255.255.255 This parameter specifies the subnet maskType trunk group.IP Address of a 0.0.0.0~255.255.255.255
The maximum allowed uplink transmit power of a UE in the cell, which is related to the-50~33 planning. For detailed information, refer to 3G Interval Type -50~33 network This parameter indicates whether to configure the maximum TX power. Enumeration Type TRUE(Configure the maximum uplink power of UE), FALSE(Not configure the max TRUE,FALSE Maximum coverage of the cell antenna. This is controlled by MTRLGY and valid when MET~0(metric system). Interval Type 1~100000 1~100000
This parameter specifies the maximum coverage of the cell antenna. This is controlled by MTRLGY and valid when IMP~1(British measurement). Interval Type 3~328080 3~328080 If the number of the association retransmissions exceeds the value, the association is going to be deleted. And the maximum number of the assoc Interval Type 0~254 0~254
The maximum number of attempts to perform interfrequency handovers. This parameter specifies the maximum number of attempts for the RNC to perform inter-freq handover after inter-freq handover failure. The handover attempts should involve the cells that have not been tried but satisfy the handover conditions. Interval Type 0~3 {0~3} This parameter specifies the maximum number of attempts0~3 the RNC to perform inter-RAT handovers after a cell-oriented measurement-base Interval Type for {0~3}
This parameter specifies the maximum bit rate of the typical service. Interval Type 0~256000000
0~256000000
This parameter specifies the maximum bandwidth for the dynamic bandwidth adjustment on the logical port. Interval Type 1~1000 64~64000 step:64
Maximum numbers of incoming calls Type second when 0~255 is lower than the forwarding threshold. When the CPU usage is lower than th Interval in one the load 0~255
Maximum numbers of incoming calls Type second when 0~255 exceeds the forwarding threshold. When the CPU usage is between the sharin Interval in one the load 0~255 Maximum number of retransmissions Type expiration of the connection control timer. 4~8 Interval upon 4~8 This parameter specifies the maximum number of cells in the active set. This parameter can achieve the balance between the signal quality in the SHO area and the performance of the system. The more cells the active set contains, the larger macro diversity gain the user obtains in the SHO area, and the smaller the intra-frequency interference is. But in this case, the user occupies resources of several cells, which increases the amount of data to be processed by the system and lowers the system performance. To reduce intra-frequency interference, it is recommended to suitably increase the number of cells in the active sets for the hotspot and micro cells, which have highly complex signals. For the cell that provides high speed services, suitably decreasing the number of cells in the active set can reduce the consumption of Interval Type 1~6 1~6 system resources. Max common channel priority supported by FACH. Enumeration Type D0, D1, D2, D3, D4, D5, D6,0, 1,..., 15D9, D10, D11, D12, D13, D14, D15 D7, D8, This parameter specifies the maximum value of Ec/NO in the E-FACH Ec/N0 adjustment algorithm. The formula is y = x * 0.5 - 24.5dB ("y" re Interval Type 0~49 -24.5~0, step: 0.5 This parameter determines the maximum number of links in the EDCH active set. When the RNC acts as the SRNC, the number of links in the E Interval Type 1~4 1~4 This parameter specifies the maximum number of HARQ retransmissions of the MAC-es flow that carries this service. Interval Type 0~15 0~15 Maximum number of users supportedType EFACH channel. Interval by the 0~48 0~48 The offset between the FACH transmit power and PCPICH transmit power in a cell.If MaxFachPower is excessively low, the UE at the cell verg Interval Type -350~150 -35~15, step: 0.1 Maximum Frame Length. Interval Type 135~1031 135~1031 Maximum number of satellites whoseType Interval ephemeris can be delivered when the A-GPS method is used. 4~16 4~16 Maximum number of users supportedType HSDPA channel. The user in this parameter refers to the user with services on the HSDPA channel Interval by the 0~100 0~100 Maximum number of users supportedType HSUPA channel.The user in this parameter refers to the user with services on the HSUPA channel, Interval by the 0~100 0~100
Max allowed number of continuous invalid measurement reports. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 2~255 2~255
The parameter value must be Interval than or equal to the maximum length of a sub-frame to 1500 multiplexing (MAXSFLEN). This parameter c greater Type 1~1500 1 for PPP This parameter specifies the maximum number of channelization codes supported by uplink DPDCH. The larger the value of this parameter, the Interval Type 1~6 1~6 Maximum number of retransmitted PDUs during the proving. Interval Type 0~10 0~10 If the number of the path retransmissions exceeds the value, the link is going to be deactivated automatically. And the maximum number of the p Interval Type 0~254 0~254 Maximum TX power of the PCPICH in a cell. This parameter should be set based on the actual system environment such as cell coverage (radiu Interval Type -100~500 -10~50, step: 0.1 UNI: 25~50 NNI: 250~500 Maximum number of data that can beType Interval transmitted during a 25~50,250~500 polling period.Number of Sequenced Data PDUs (SD PDUs) that are allowed to be tr
Maximum queue time of users. WhenType initiates a call, it joins the queue due to cell resource insufficiency. This parameter defines the max Interval a user 1~60 1~60
This parameter specifies the maximum length of the PPP sub-frame. If the length of the1 to 1500 is greater than this parameter value, the fram Interval Type 1~1500 PPP frame The parameter specifies the target value of the uplink load,0~100 is decreased through HSUPA power control on the NodeB side. If the parame Interval Type which 0~1, step:0.01 This parameter specifies the maximum duration for the single point positioning. Interval Type 1~24 1 to 24
Sum of the maximum transmit power Type DL channels in0~500 It is configured in the0~50, step: 0.1 Interval of all a cell. network planning. For detailed information of this param The maximum UL transmit power forType Interval background service in a specific cell. It is based on the UL coverage requirement of the background servic -50~33 -50~33 Maximum UL transmit power for conversational service in-50~33 Interval Type a specific cell. It is based on-50~33 coverage requirement of the conversational serv the UL The maximum UL transmit power forType Interval the interactive service in a specific cell. It is based on the UL coverage requirement of the interactive serv -50~33 -50~33 Maximum UL transmit power for the Type Interval streaming service in a specific cell. It is based on the UL coverage requirement of the streaming service de -50~33 -50~33 This parameter specifies the number of users selected in code reshuffling. Code reshuffling can be triggered only when the number of users on a Interval Type 1~3 1~3
Priority identifier of MBDR cells. TRUE indicates that the MBDR cell priority is valid in the cell-oriented measurement-based DRD algorithm, and the cell can be considered as the measurement object. FALSE indicates that the MBDR cell priority is invalid. Enumeration Type
Priority of MBDR cells. The priority that corresponds to the MBDR cell is valid only when the MBDRFlag parameter is set to TRUE. The lower the priority, the easier it is for the MBDR cell to be delivered as the measurement object. For example, it is more possible for a MBDR cell of priority 1 than a cell of priority 2 to be delivered as the measurement object. Interval Type 0~15 0~15 This parameter specifies the index of Type Interval the BFD. The check 0~31 is unique. If the check index is not specified, a unique value ranging from 0 to 3 index 0 to 31 This parameter specifies the local IP address of the multi-hop BFD. IP Address Type 0.0.0.0~255.255.255.255 This parameter specifies the number of the slot where the command is executed. Interval Type 14~27 14 to 27 This parameter specifies the number of the subrack where 0~5command is executed. 0 to 5 Interval Type the Activity factor of the MBMS Interval Type service. 0~100 0~1, step: 0.01 MBMS common channel service downlink factor. Interval Type 0~100 0~100 Indicating whether the CCH carries the MCCH. Enumeration Type COMMON, MCCH COMMON, MCCH When the priority of the RAB of MBMS services exceeds 1~15 Interval Type this threshold, reconfigure the MBMS power to the minimum power. The lower the p 1~15 A timer used to alarm for no mbms data check for MBMS 1~10 Interval Type traffic. 1~10 ON denotes enabling of the MBMS Iub transmission resource sharing ON(ON) OFF denotes ON Enumeration Type OFF(OFF), function; OFF, disabling of the MBMS Iub transmission resource Mobile country code of the RNC. Type String 000~999 Mobile network code of the RNC. Type String 000~999 It is an indicator of MBMS neighboring cell. Enumeration Type FALSE, TRUE FALSE,TRUE
MBMS service release is an extreme method in reducing the cell load and recovering the system when the cell is overloaded and congested. The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of MBMS services released in executing downlink OLC service release. Interval Type 0~8 0~8 Indicating whether MBMS isEnumeration Type supported. OFF, ON OFF, ON This parameter specifies the uplink bit rateType MBMS service in PTP mode.D128, D144, D256 128, 144, 256 rate to the MBMS service, bu Enumeration of the D8, D16, D32, D64, The CN8, 16, not 64, does 32, assign the uplink
MBMS SA ID. For detailed information of this parameter,0~65535the 3GPP 25.346. 0~65535 Interval Type refer to MBMS Service Identity. Interval Type 0~16777215 0~16777215 ON denotes enabling of the MBMS function; OFF denotesOFF(OFF), ON(ON) Enumeration Type disabling of the MBMS function. ON OFF, The total MBMS throughput Interval Type of all the operators cannot exceed that defined in the license to 3910000 0~3910000 0 file.
This parameter specifies the transport mode of MBMS services. The point-to-multipointPTM, PTP, ENHANCEDPTM, DYNAMIC PTM (ENH Enumeration Type PTM, PTP, ENHANCEDPTM, DYNAMIC (PTM), point-to-point (PTP), and enhanced This parameter specifies the maximum burst size. Interval Type 3~10000 3 to 10000
000~999
This parameter specifies the coefficient of access period of the MCCH. Interval Type 0~3
0~3
This parameter specifies the coefficient of modification period of the MCCH. Interval Type 7~10
7~10
This parameter specifies the coefficient of repetition period of the MCCH. Interval Type 0~3 0~3 This parameter specifies the priority of the MC. This parameter is valid only when "MLPPP type" is set to MCPPP. Interval Type 4,8 4(Use two bytes to present MC priority number, 4 classe This parameter specifies the minimum rate of ATM traffic. Physical unit: cell/s or kbit/s. to 70754 Interval Type 30~70754 30
This parameter specifies an MD. Interval Type This parameter specifies the name of an MD. String Type
0~7 -
0 to 7 1 to 20 characters
Measurement quantity used in coverage-based interRAT measurement in event3A-triggered reporting mode. - Ec/No: signal-to-noise ratio - RSCP: indicates the received signal code power CPICH_Ec/No indicates that the Ec/No measurement quantity is used for event 3A measurement. The physical unit is dB; CPICH_RSCP indicates that the RSCP measurement quantity is used for event 3A measurement. The physical unit is dBm. AUTO indicates that the EcN0 measurement quantity is used for event 3A measurement if RNC receives the Ec/No 2D firstly. The RSCP measurement quantity is used for event 3A measurement if RNC receives the RSCP 2D firstly. Enumeration Type CPICH_EC/NO~0 CPICH_RSCP~1 AUTO CPICH_EC/NO,CPICH_RSCP,AUTO
This parameter specifies an MEP in an MA. Interval Type 1~300 1 to 300 This parameter specifies the number of the physical slot where the local MEP in an MA14 to 27 Interval Type 14~27 resides. LocalMep, RemoteMep This parameter specifies the type of an MEP to be added to an MA. "LocalMep" indicates a local MEP. "RemoteMep" indicates a remote MEP. Enumeration Type LocalMep, RemoteMep This parameter specifies the MP/MC list head option. Enumeration Type LONG, SHORT LONG(Long sequence number which is used by MP/MC ID of the MICH. Interval Type 0~255 0~255 TX power of the MICH. The Interval the power of the MICH, the higher of the success ratio of the MBMS paging. However, more cell power re greater Type -10~5 -10~5 The value indicates whether the MICH uses time and space TX diversity. ForTRUE(Use) Enumeration Type FALSE(Not Use), detailed information of this parameter, refer to the 3GPP TS 25.43 FALSE, TRUE This parameter specifies the minimum bandwidth for the dynamic bandwidth adjustment on the logical port. Interval Type 1~1000 64~64000 step:64 Min common channel priority supported by FACH. Enumeration Type D0, D1, D2, D3, D4, D5, D6,0, 1,..., 15D9, D10, D11, D12, D13, D14, D15 D7, D8, This parameter specifies the minimum spreading factor supported by SF16, SF32, SF64 SF4, SF8, SF16,value of this parameter, the fewer the av Enumeration Type SF4, SF8, downlink DPDCH. The larger the SF32, SF64 This parameter specifies the minimum value of Ec/NO in the E-FACH Ec/N0 adjustment algorithm. The formula is y = x * 0.5 - 24.5dB ("y" rep Interval Type 0~49 -24.5~0, step: 0.5
This parameter is valid when Interval Type the corresponding parameter 1~60 to the reporting period unit for the event E of AMR service is set to MIN. The related 1~60
This parameter is valid when Interval Type the corresponding parameter 1~60 to the reporting period unit for the event E of BE service is set to MIN. The D related 1~60
This parameter is valid when Interval Type the corresponding parameter 1~60 to the reporting period unit for the event F of BE service is set to MIN. The D related 1~60
DL basic common measurement report cycle. For detailed 1~60 Interval Type information of this parameter, refer to 3GPP TS 25.433. 1~60
Measurement report period of event EType Interval triggered by DL OLC. For detailed information of this parameter, refer to 3GPP TS 25.433. 1~60 1~60
This parameter specifies the HSDPA Type measurement1~60 period. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval bit rate report 1~60
HSDPA power requirement measurement report period For detailed information of this 1~60 Interval Type 1~60 parameter, refer to 3GPP TS 25.433.
This parameter specifies the HSUPA Type measurement1~60 period. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval bit rate report 1~60
UL basic common measurement report cycle. For detailed 1~60 Interval Type information of this parameter, refer to 3GPP TS 25.433. 1~60
Measurement report period of event EType Interval triggered by UL OLC. For detailed information of this parameter, refer to 3GPP TS 25.433. 1~60 1~60
This parameter is valid when Interval Type the corresponding parameter 1~60 to the reporting period unit for the event E of VP service is set to MIN. The D related 1~60 This parameter specifies the minimum number of links required for an IMA group in the activated state. Interval Type 1~32 1 to 32
Minimum TX power of the PCPICH in a cell. This parameter should be set based on the actual system environment such as cell coverage (radiu Interval Type -100~500 -10~50, step: 0.1 This parameter specifies the minimum interval for receiving BFD packets in millisecond. to 1000 Interval Type 10~1000 10 This parameter specifies the minimum interval for sending10~1000 Interval Type BFD packets in millisecond.10 to 1000 This parameter specifies the minimum spreading factor supported by SF16, SF32, SF64 SF4, SF8,the value of this parameter, the fewer the availa Enumeration Type SF4, SF8, uplink DPDCH. The larger SF16, SF32, SF64 Maximum number of randomInterval preamble loops. If the parameter value is excessively low, the UE access success rate is affected. If the par access Type 1~32 1~32
Mobile network code of the RNC. Type String 00~99,000~999 MOCN Control Switch.1) COMM_MOCN_NRI_GLOBAL_CONFIG_MODE_SWITCH: When the switch is selected, theCOMM_MIB_MUL Bit Field Type COMM_MOCN_NRI_GLOBAL_CONFIG_MODE_SWITCH, NRI of any CN nod COMM_MOCN_NRI_GLOBAL_CONFIG_MODE_SW This parameter determines whether the RNC supports the MOCN function. Enumeration Type NO, YES NO,YES This parameter specifies the configuration Type Enumeration mode. OFF, ON OFF,ON This parameter specifies the backup mode Type MSP function. Enumeration of the MODE1(1:1 Backup), MODE2(1+1 Single End), MODE3(1+1 Both End) MODE1, MODE2, MODE3 This parameter specifies the working modeType system clock source.AUTO Enumeration of the MANUAL, The system clock source canAUTOin manual mode or in auto mode. If th MANUAL, work This parameter specifies the check mode. PRIMARY indicates the check on a primary port. STANDBY indicates the check on a standby port. I Enumeration Type PRIMARY, STANDBY, INDEPENDENT PRIMARY,STANDBY,INDEPENDENT
Working mode of the SCTP link. Enumeration Type SERVER, CLIENT SERVER, CLIENT This timer is started when an Intervalsignaling entity receives from the peer node a request for modifying the bandwidth of an AAL2 path and se AAL2 Type 5000~30000 5000~30000 This timer is started when an Intervalsignaling entity sends 5000~30000 a request for modifying an AAL2 connection. AAL2 Type the peer node 5000~30000 This parameter specifies a sampling period of retransmission ratio monitoring after the RLC entity is established or reconfigured. Interval Type 40~60000 40~60000 Length of the period within which theType of consecutive1~65535 increase the rate of a BE service is monitored. Increase of the BE service ra Interval times failure to 1~65535 This parameter specifies the MPAddress Type the DHCP IP IP address for server. 0.0.0.0~255.255.255.255
This parameter specifies the number of the MLPPP group.0~63 Interval Type 0 to 63 Management proving status of the SAAL link.When Management Proving Status MPS_NORMAL, MPS_NEUTRAL sends proving PDUs in i Enumeration Type MPS_EMERGENCY, is set to MPS_NORMAL, the SAAL MPS_NORMAL, MPS_EMERGENCY, MPS_NEUTR This parameter specifies the MLPPP type. Type Enumeration MLPPP, MCPPP MLPPP(MLPPP group),MCPPP(MCPPP group) This parameter specifies the number of a slot that holds the MPU. Interval Type 0,2,4,8,10 0,2,4,8,10 Intra-frequency measurementEnumeration Type reporting interval. D12, D16, D20, D24, D28, D32, 16, 20, 24, 28, 32, 64 12, D64
Indicating whether to supportEnumeration Type the MR function,When it is checked, MR function will beOFF,ON OFF, ON valid, otherwise, MR function cannot be used. When the parameter is set to ON, MR will Type Enumeration be started. OFF, ON For each switch of this parameter, the value can be: ON
MR trace traffic type set. Bit Field Type TRAFFIC_AMR, TRAFFIC_VP, 4, 8 1, 2, TRAFFIC_BE, TRAFFIC_OTHER This switch specifies whetherEnumeration Type logical channel on theON(ON) WhenOFF, ON to add the MSCH OFF(OFF), SCCPCH. multi-MTCH logical channels are carried on one SCCP This parameter specifies whether to add the MSCH logicalOFF(OFF), ON(ON) Enumeration Type channel on the SCCPCH. When one MTCH logical channel is carried on one SCCPC OFF, ON Broadcast message content. Any Type 1~100 characters When the parameter value is ON,the broadcast message is OFF(Message is invalid), ON(Message is valid) Enumeration Type valid,When OFF,the broadcast message is invalid. OFF,ON This parameter specifies the control command of the MSP CLEAR(Cleared), LOP(Lockout of Protection), FS(Forcibly switchover working link Enumeration Type switchover protection group. CLEAR,LOP,FS,MS,EXERS,
Maximum power limit of all the MTCHs. This parameter is a limit to the maximum bearing of the MBMS PTM bearing. When the power of all Interval Type 0~100 0~1, step:0.01
Maximum code limit of all the MTCHs. This parameter is 0~63 to the maximum bearing of the MBMS PTM bearing. When the code of all the Interval Type a limit 0~63
This parameter specifies the minimum coverage percentage of the MTCH corresponding to the RAB priority of 0. When the cell load is high, th Interval Type 0~100 0~1, step: 0.01
This parameter specifies the minimum coverage percentage of the MTCH corresponding to the RAB priority of 15. When the cell load is high, t Interval Type 0~100 0~1, step: 0.01 This parameter specifies the MTCH multiplexing threshold. When the rate D128,MBMS service is 128, 256 this threshold, the service, togethe Enumeration Type D16, D32, D64, of an D256 16, 32, 64, lower than This parameter specifies whether to apply Robust Header Compression (ROHC) on the TRUE, FALSE Enumeration Type True, False MTCH. The value TRUE indicates to apply ROHC on th
Available guarantee power ofIntervalMTCHs. This parameter is a protection for the MBMS PTM bearing. When the power of all the MTCHs ar all the Type 0~100 0~1, step:0.01
Available guarantee codes of IntervalMTCHs. This parameter is a protection for the MBMS PTM bearing. When the codes of all the MTCHs are all the Type 0~63 0~63 The OM interface supports localization and MET or IMP can be selected. Enumeration Type MET(Metric System), IMP(British Measurement) 0~1
This parameter specifies whether the metric system or the imperial system is used. Enumeration Type MET(MET), IMP(IMP)
MET, IMP
This parameter specifies the maximum transmission unit. 256~1500 Interval Type
256 to 1500
This parameter specifies the maximum time elapsed before the sub-frames over the PPP1link1500multiplexed. Interval Type 1~1500 to are This parameter specifies the discriminator of the check on 1~16 Interval Type the local end. 1~16 Number of proving PDUs transmittedType the proving.Reference to ITU-T Q2110. 10~2000 Interval during 10~2000 Maximum number of retransmissions Type RRC CONNECTION REQUEST message.0~7 Interval of the 0~7 Maximum number of retransmissions Type Interval of CELL UPDATE/URA UPDATE.Protocol default value is 3. 0~7 0~7 Maximum number of retransmissions Type CAPABILITY INFORMATION. Protocol 0~7 Interval of UE 0~7 default value is 2. Maximum number of retransmission of RRC CONNECTION RELEASE COMPLETE.1~8 Interval Type 1~8
Maximum number of successive "in sync" Type Enumeration indications receivedD2, D4, D10, D20,default valueD200,D10, D20, D50, D100, D200, D400, D600, D1, from L1. Protocol D50, D1, D2,is 1. D400, D600, D800, D1000 D100, D4, Maximum number of successive "out of sync" indications received D4, D10, Protocol default value is 20. D20, D50, D100, D200 Enumeration Type D1, D2, from L1. D20, D50, D1, D2, D4, D10, D100, D200 Maximum number of successive "in sync" Type Enumeration indications receivedD2, D4, D10, D20, D50, D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D1, from L1 when T313 is activated. Protocol default value is D1000 D100, D200, D400, D600, D800, 1. Maximum number of resend times of message "RRC CONNECTION SETUP" or "CELL UPDATE CONFIRM". default value is 1. Enumeration Type D1, D2, D3, D4 D1,D2,D3,D4
String Type
1~31 characters
Upper limit of random accessInterval Type For details, refer to the 3GPP TS 25.331 and 3GPP TS 25.214 protocols. back-off delay. 0~50 0~50
Lower limit of random accessInterval Type For details, refer to the 3GPP TS 25.331 and 3GPP TS 25.214 protocols. back-off delay. 0~50 0~50 When call shock control starts, the AMR_RRC number can be accessed per second for NodeB. Interval Type 1~200 1~200 This parameter specifies the number of the NBAP service 1024~65535 Interval Type listening port. 1024~65535 This parameter specifies the OM addressType IP Address for NodeB ATM-transport. 0.0.0.0~255.255.255.255 This parameter specifies the OM mask for NodeB ATM transport. IP Address Type 0.0.0.0~255.255.255.255 When call shock control starts, the register and 3G->2G reselect number can be accessed per second for NodeB. Interval Type 1~200 1~200 This parameter specifies the OM addressType IP Address for NodeB IP transport. 0.0.0.0~255.255.255.255 This parameter specifies the OM mask for NodeB IP transport. IP Address Type 0.0.0.0~255.255.255.255 This parameter specifies the first ESN. String Type 1 to 30 characters This parameter specifies the second Type String ESN. 1 to 30 characters The above values of the algorithms represent the following information: CRD_ADCTRL: Control NodeB Credit admission control algorithm Only when IUB_CONG_CAC_SWITC H which is set by the SET CACALGOSWITCH command and this switch are on,the NodeB Credit admission control algorithm is valid. HSDPA_UU_ADCTRL: Control HSDPA UU Load admission control algorithm HSDPA_GBP_MEAS: Control HSDPA HS-DSCH Required Power measurement HSDPA_PBR_MEAS: Control HSDPA HS-DSCH Provided Bit Rate measurement HSUPA_UU_ADCTRL: Control HSUPA UU Load admission control algorithm MBMS_UU_ADCTRL: Control MBMS UU Load admission control algorithm DOFFC: Default DPCH offset configuration Bit Field Type CRD_ADCTRL(Credit Admission Control Algorithm), HSDPA_UU_ADCTRL(HSD CRD_ADCTRL,HSDPA_UU_ADCTRL,HSUPA_UU_ algorithm
The algorithms with the above values represent are as follow: ALGORITHM_OFF: Disable downlink call admission control algorithm. ALGORITHM_FIRST: The load factor prediction algorithm will be used in downlink CAC. ALGORITHM_SECOND: The equivalent user number algorithm will be used in downlink CAC. ALGORITHM_THIRD: The loose call admission control algorithm will be used in downlink CAC. Enumeration Type The algorithms with the above values represent are as follow: INTRA_FREQUENCY_L DB: Intra-frequency load balance algorithm. It is also named cell breathing algorithm.Based on the cell load, this algorithm changes the pilot power of the cell to control the load between intra-frequency cells. PUC: Potential user control algorithm. Based on the cell load, this algorithm changes the selection/reselection parameters of a cell to lead the UE to a lighter loaded cell. UL_UU_OLC: UL UU overload congestion control algorithm. When the cell is overloaded in UL, this algorithm reduces the cell load in UL by quick TF restriction or UE release. DL_UU_OLC: DL UU overload congestion control algorithm. When the cell is overloaded in DL, this algorithm reduces the cell load in DL by quick TF restriction or UE release. Bit Field Type UL_UU_LDR: UL UU load
The algorithms with the above values represent are as follow: NBM_LDC_ALL_UE: When inter-frequency blind handover select user occurs, no need to consider whether target cell support users. NBM_LDC_MATCH_UE_ ONLY: When interfrequency blind handover select user occurs, only consider users supported by target cell. NBM_LDC_MATCH_UE_ FIRST: When interfrequency blind handover select user occurs, first consider users supported by target cell. Enumeration Type The algorithms with the above values represent are as follow: ALGORITHM_REQUIRE D: Always reset the mac-hs no matter the cells in question are in the same NodeB or not. ALGORITHM_DEPEND_ ON_LCG: Reset the mac-hs only when the cells in question are in the different local cell group. Enumeration Type The algorithms with the above values represent are as follow: ALGORITHM_OFF: Disable uplink call admission control algorithm. ALGORITHM_FIRST: The load factor prediction algorithm will be used in uplink CAC. ALGORITHM_SECOND: The equivalent user number algorithm will be used in uplink CAC. ALGORITHM_THIRD: The loose call admission control algorithm will be used in uplink CAC. Enumeration Type
ALGORITHM_REQUIRED,ALGORITHM_REQUIRED,ALGORITHM_DEPEND_ ALGORITHM_DEPEND_ON_LCG
This parameter is used to identify WPS users with priority.PRIORITY1(WPS USER 3, 4, 5, and 6 are PRIORITY2, PRIORITY3, PRIORITY4, Bit Field Type For instance, if priorities PRIORITY 1), PRIORITY2(WPS USER PRIORITY 2), P PRIORITY1, selected, users with priorities are regarded WPS (Wireless Priority Service) is NS/EP Type Enumeration (National Security/Emergency Preparedness)ALGORITHM_OFF, ALGORITHM_ONWhite House o ALGORITHM_OFF(WPS Algorithm Switch OFF), ALGORITHM_ON(WPS Algori AMR conversation service controlled by When the RRC REQ total number of one NodeB reach this threshold the RRC flow control will be triggered. Interval Type 1~200 1~200 This parameter specifies the transport type Type NodeB. ATMTRANS_IP indicates the ATM transport type, IPTRANS_IP indicates the IP tran Enumeration of the ATMTRANS_IP, IPTRANS_IP, ATMANDIPTRANS_IP ATMTRANS_IP, IPTRANS_IP, ATMANDIPTRANS_ Uniquely identifying the different network in the neighboring area. Interval Type 0~7 0~7
Uniquely identifying a neighboring cell. Interval Type 0~65535 0~65535 The cell will shut down automaticallyType when the neighboring cell load is less than the difference between the LDR threshold and this thresh Interval only 0~100 0~1, step:0.01 ID of the RNC controlling a neighboring cell. Uniquely identifying an RNC. Interval Type Indicating the network control mode. Enumeration Type 0~4095 NC0, NC1, NC2, RESET 0~4095 NC0,NC1,NC2,RESET
When the number of UEs responding Type Interval to counting/recounting is greater than or equal to this threshold, the PTM mode is applied to data transmis 2~10 2~10 When this parameter is set to Enumeration Type load of the GSM cell exceeds the related threshold, the RNC will stop the non-coverage based i ON, and when the OFF, ON OFF, ON Maximum number of non-HCS cell reselection. This parameter, along with Tcrmaxnonhcs, defines the speed estimation threshold of non-HCS c Interval Type 1~16 1~16 Indicating whether the DSP and the OSP are connected directly or indirectly. Enumeration Type NO(NO_DIRECT_CONNECT), YES(DIRECT_CONNECT) NO, YES This parameter specifies the IP address of the next hop. IP Address Type 0.0.0.0 to 255.255.255.255
This parameter specifies the IP address of the next hop. IP Address Type
0.0.0.0~255.255.255.255
Threshold for deciding that the UE is in high-mobility state. This parameter specifies a threshold for high-speed decision. After the UE reports event 1D, the UE is considered in high-mobility state if the number of changes of the best cell during [TFASTSPDEST] is larger than [NFASTSPDEST]. The smaller the value is, the more possibly the UE is decided in high-mobility state. Interval Type 1~16 1~16 Network Indicator. INT(international network), INTB(international reserved),NATB International Network Code, International Standby Netw Enumeration Type INT, INTB, NAT, NAT(national network), NATB(national reserved).
This parameter defines the of successive in-sync indications required for the NodeB to 1~256 the radio link recovery process.The radio link set Interval Type 1~256 trigger This parameter should be set Enumeration the actual network situation . If there is the Gs interface between SGSN and MSC/VLR this paramete according to Type MODE1, MODE2 MODE1,MODE2 This parameter specifies the value of the NAS Node Selection Function (NNSF) timer for CS traffic paging. For the IMSI paging of the UE in C Interval Type 0~60 0~60 This parameter specifies the number of the cabinet where the NodeB is installed. Interval Type 0 0 Maximum number of HSDPA users of the NodeB. If the HSDPA user access is rejected by the NodeB, you can infer that the HSDPA licenses a Interval Type 0~3840 0~3840 Maximum number of HSUPA users of the NodeB. If the HSUPA user access is rejected by the NodeB, you can infer that the HSUPA licenses a Interval Type 0~3840 0~3840
NodeB ID. Interval Type 0~65535 0~65535 This parameter specifies the number of an IMA group of the NodeB. Interval Type 0~3 0 to 3 IUB_LDR (Iub congestion control algorithm): When the NodeB Iub load is heavy, users are assembled in priority order among all the NodeBs and some users are selected for LDR action (such as BE service rate reduction) in order to reduce the NodeB Iub load. NODEB_CREDIT_LDR (NodeB level credit congestion control algorithm): When the NodeB level credit load is heavy, users are assembled in priority order among all the NodeBs and some users are selected for LDR action in order to reduce the NodeB level credit load. LCG_CREDIT_LDR (Cell group level credit congestion control algorithm): When the cell group level credit load is heavy, users are assembled in priority order among all the NodeBs and some users are selected for LDR action in order to reduce the cell group level credit load. IUB_OLC (Iub Overload Bit Field Type IUB_LDR(IUB LDR Algorithm), NODEB_CREDIT_LDR(NodeBLCG_CREDIT_L IUB_LDR, NODEB_CREDIT_LDR, Credit LDR Algo congestion control
Name of the NodeB. String Type 1~64 characters Protocol version of the NodeB. Enumeration Type R99, R4, R5, R6, R7 R99, R4, R5, R6, R7 This parameter specifies the period ofType Interval reporting the NodeB bandwidth, in minutes. 1~60 1 to 60 This parameter specifies the type of reporting the NodeB bandwidth. EVENT Enumeration Type PERIOD, "PERIOD" indicates the periodical report type. "EVENT" indicates the eve PERIOD,EVENT This parameter specifies the number of the slot where the port of the NodeB is located. 0 to 1,12 to 15,22 to 23 Interval Type 0~1,12~15,22~23 This parameter specifies the number of the subrack where 0~2NodeB is installed. Interval Type the 0 to 2 This parameter specifies the type of a sub-board of the NodeB. Enumeration Type BASE_BOARD, CH_STM1,BASE_BOARD,CH_STM1,E1 E1 Indicating the type of the NodeB. Enumeration Type NORMAL(Normal), PICO_TYPE1(Pico PICO_TYPE1, PICO_TYPE2 2) NORMAL, type 1), PICO_TYPE2(Pico type Period of node synchronization. Interval Type 1~288 5~1440, step:5 Measurement start time (HH:MM:SS). Type Compound hour, min, sec 00:00:00~23:59:59 UNI_AAL2SWITCH is the adjacent node Type ATM switch on the Iub interface. UNI_AAL2SWITCH,is the adjacent node of the ATM switc Enumeration of the IUB, IUR, IUCS, IUPS, NNI_AAL2SWITCH IUPS, UNI_AAL2SWITCH, NNI_AA IUB, IUR, IUCS, NNI_AAL2SWITCH This parameter specifies the small-scaled base station type. Enumeration Type PICO_TYPE1, PICO_TYPE2 PICO_TYPE1, PICO_TYPE2 Indicating whether the non-HCS speed estimation parameter should be configured. Enumeration Type CONFIGURED, NOT_CONFIGURED CONFIGURED, NOT_CONFIGURED This parameter specifies the ratio of the non-serving E-DCH RX power to the total E-DCH RX power. The parameter indicates whether a non-s Interval Type 0~100 0~1, step:0.01 This parameter defines the of successive in-sync indications required for starting the radio link failure timer. When the radio link set is in the sy Interval Type 1~256 1~256
Priority of neighboring cells. The priority that corresponds to the neighboring cell is valid only when the this parameter is set to TRUE. The lower the priority, the easier it is for the neighboring cell to be delivered as the measurement object. For example, it is more possible for a neighboring cell of priority 1 than a cell of priority 2 to be delivered as the measurement object. Interval Type Priority of neighboring cells. The priority that corresponds to the neighboring cell is valid only when the this parameter is set to TRUE. The lower the priority, the easier it is for the neighboring cell to be delivered as the measurement object. For example, it is more possible for a neighboring cell of priority 1 than a cell of priority 2 to be delivered as the measurement object. Interval Type Priority identifier of neighboring cells. TRUE indicates that the neighboring cell priority is valid in the algorithm of neighboring cell combination. FALSE indicates that the neighboring cell priority is invalid, and, in the algorithm of neighboring cell combination, the cell with invalid priority is the last one to be considered as the measurement object. Enumeration Type
0~63
0~63
0~30
0~30
FALSE, TRUE
FALSE,TRUE
This parameter specifies the NPTP-PTM offset. During recounting in PTP mode, if the number of PTP users is larger than or equal to NPTP-PTM, the transmission mode transits to PTM. The value of NPTP-PTM = [PARA]NcountingThd[/PA RA] + [PARA]NPtpToPtmOffset[/ PARA]. The transition between PTP and PTM affects user experience. Thus, to minimize ping-pong effect, the transition between PTP and PTM uses a threshold other than [PARA]NcountingThd[/PA RA]. The two thresholds are used only to avoid pingpong effect, so the difference between the two should not be too large. Because the value of [PARA]NcountingThd[/PA RA] is small, it is recommended that the default value of this parameter be used. Identifying a Network resourse . 1. The NRI numbers of CS domain and PS domain are independent from each other. 2. If multiple pool areas overlap, the NRI uniquely identify all the CN nodes connected to it. 3. A CN node can have multiple NRIs. In one pool area, however, an NRI can only correspond to one CN node.
Interval Type
1~5
1~5
Interval Type
0~1023
0~1023
Neighboring RNC ID. Interval Type Source ATM address. It should be input in hexadecimal format with prefix of "H'". 1.The first byte of it is recommended to started with H'45 (indicating E.164 address), H'39 (indicating DCC address) or H'47 (indicating ICD address). When it is started with "H'45", the following seven and a half octets must be BCD code, called E.164e when the last part DSP is full of zero, such as 0x45000971500202001F00 00000000000000000000, while called E.164A when the last part DSP is not full of zero. H'45 is recommended. 2.It should be allocated in the ATM network and Any Type cannot be repeated.
0~4095
0~4095
ATM address
Destination ATM address of the AAL2 route. It must be input in hexadecimal format within 2 and 21 bytes including the prefix H'(H'is 1 byte). It is recommended that the first byte is H'45 (indicating an E.164 address), H'39 (indicating a DCC address), or H'47 (indicating an ICD address). If the first byte is H'45, then the following seven and a half bytes (that is, 15 digits) must be a BCD code. If the following part, called DSP, are all zeros, this address is called E.164e, for example, 0x45000971500202001000 00000000000000000000. If the DSP are not all zeros, this address is called E.164A. The ATM address is assigned in the ATM network and must be unique. It is recommended to use H'45 format. Any Type None Threshold for deciding whether the UE in lowmobility state. After the slow speed timer times out, the UE is considered in low-mobility state if the number of changes of the best cell caused by the UE reporting of event 1D during [TSLOWSPDEST] is smaller than [NSLOWSPDEST]. The larger the value is, the more possibly the UE is decided in low-mobility state. Interval Type 1~16 1~16 NullNRI VALUE indicate that ue assign load other CN node ,when NNSF select CN node. Interval Type 0~1023 0~1023
Specifies the number of access classes that are restricted at a time according to the flexible polling restriction mode. Interval Type 1~16 1~16
This parameter specifies the minimum OAM flow bandwidth. Interval Type 0~100 0%~100% This parameter specifies the DSCP value of the OAM flow. The data of the OAM flow 0 to 63a dedicated queue for transmission rather than que Interval Type 0~63 enters This parameter specifies the minimum OAM flow bandwidth switch. Enumeration Type OFF, ON OFF,ON Offset of Qoffset1 when neighboring Type Interval cell load is heavier than that of the center cell (Note: Qoffset1 is used as a priority to decide which cell wil -20~20 -20~20 Offset of Qoffset1 when neighboring Type Interval cell load is lighter than that of the center cell (Note: Qoffset1 is used as a priority to decide which cell will -20~20 -20~20 Offset of Qoffset2 when neighboring Type Interval cell load is heavier than that of the center cell (Note: Qoffset2 is used as a priority to decide which cell wil -20~20 -20~20 Offset of Qoffset2 when neighboring Type Interval cell load is lighter than that of the center cell (Note: Qoffset2 is used as a priority to decide which cell will -20~20 -20~20 Offset of Sintersearch when center cell load level is "Heavy" (Note: Sintersearch is used to decide whether to start the inter-frequency cell resele Interval Type -10~10 -20~20,step:2 Offset of Sintersearch when center cell load level is "Light" (Note: Sintersearch is used -20~20, step:2 Interval Type -10~10 to decide whether to start the inter-frequency cell reselec
Identifying the period of the OLC execution. When overload occurs, execution of OLC can dynamically reduce the cell load. When setting the parameter, consider the hysteresis for which the load monitoring responds to the load change. For example, when the layer 3 filter coefficient is 6, the hysteresis for which the load measurement responds to the step-function signals is about 2.8s, namely that the system can trace the load control effect about 3 s later after each load control. In this case, the OLC period timer length cannot be smaller than 3s. OlcPeriodTimerLen along with ULOLCFTFRstrctUserNum , DLOLCFTFRstrctUserNum , ULOLCFTFRSTRCTTime s, DLOLCFTFRSTRCTTime s, ULOLCTraffRelUserNum, Interval Type and
100~86400000
100~86400000
Identity Operator Type,as follows: Primary Operator: Control whether the RAN support some funtion feature and distribute seconder operator's license. Second Operator: the RAN that is controled by primary operator support some funtion feature and license. Outer Operator: Operator which don't include the Primary , Second operator of the source rnc handover the target RNC to support the mobiling . Common Operator: Common Operator indicate PLMN ID the subscribe select as the same as the tradition network do in the sharing network. It is also the Serving operator. Enumeration Type PRIM(Primary Operator), SEC(Secondary Operator), OUTER(Outer Operator), COM PRIM,SEC,OUTER,COMM This parameter specifies the type of transport channel at the peer end for TRCH_HSDSCHFor CS services, this parameter must be set to TRCH_ Enumeration Type TRCH_DCH, the typical RAB. TRCH_DCH, TRCH_HSDSCH
This parameter specifies the map mode between the optical port and the DS1. Enumeration Type MAP_MODE_LUCENT, MAP_MODE_HUAWEI, MAP_MODE_ALCATEL MAP_MODE_LUCENT,MAP_MODE_HUAWEI,MAP This parameter specifies whetherField Type Bit the IE is reported to the CN. R5_PosData_SWITCH, Last_Known_Service_Area_SWITCH R5_PosData_SWITCH, Last_Known_Service_Area_SW This parameter specifies the type of the optical port. Enumeration Type SDH, SONET SDH, SONET Azimuth of the semi-major axis of an Type Interval uncertain area in the 0~179 cell center (the anticlockwise0~179 from the semi-major axis to the north). angle This parameter specifies the operation typeType command. One_touch indicates that thisand boards), Step_by_Step(Choose step by step) Enumeration of this One_touch(For all the subracks command is all the subracks and boards), Step_by_St One_touch (for executed on all boards in all subracks. S Flag of OTDOA location activation. Enumeration Type INACTIVE, ACTIVE INACTIVE, ACTIVE UE positioning mode when the OTDOA method is selected. The UE supports both UE-based OTDOA mode and UE-assisted OTDOA mode. Enumeration Type UE_BASED, UE_ASSISTED, UE_BASED_PREFERRED, UE_BASED_PREFERR UE_BASED, UE_ASSISTED, UE_ASSISTED_PREFE
Mobility flag of the overlay network. This flag is valid when the OVERLAY switch is set to ON. When the flag is set to NOT_FORBIDDEN, this means that, when using the H service, the UE can deliver the intra-frequency measurement and handover to the DRNC cell, which can be used as the target cell of inter-frequency handover. When the flag is set to FORBIDDEN, this means that, when using the H service, the UE cannot deliver the intra-frequency measurement and handover to the neighboring cell, which cannot be used as the target cell of interfrequency handover. Note that the H+CS combined service is considered as the CS service.
Enumeration Type FORBIDDEN, NOT_FORBIDDEN FORBIDDEN,NOT_FORBIDDEN Ownership of the AAL2 Path. Enumeration Type PEER, LOCAL PEER, LOCAL Indicating whether the destination ATM address is the adjacent node specified by [ANI]. If the two nodes are the same, set this parameter to YE Enumeration Type NO(ATM_ADDRESS_DOES_NOT_BELONG_TO_THIS_ADJACENT_NODE), Y NO,YES For IUPS Path,this parameterEnumeration Type must be ENABLED.Other Paths have default value DISABLED.If this DISABLED set to ENABLED,then [Chec ENABLED, DISABLED ENABLED, parameter is
Identifying an AAL2 path between two AAL2 nodes. For the same AAL2 path, the path1~4294967295 in the two AAL2 nodes must be the sam Interval Type 1~4294967295 IDs configured
Identifying an IP path. Interval Type 0~65535 0~65535 Type of the IP path. Enumeration Type QOS, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42 QOS, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF3 This parameter specifies the type of patch to be loaded to the DPUb board. Enumeration Type NP, DSP NP,DSP Offset of the PCH transmit power from the PCPICH transmit power in a cell. If the value is set too small, the UEs on the cell edge cannot receiv Interval Type -350~150 -35~15, step: 0.1
TX power of the PCPICH in a cell. This parameter should -100~500 on the actual system environment such as cell coverage (radius) and geog Interval Type be set based -10~50, step: 0.1 Pilot power adjustment step increasedType Interval or decreased in each0~100 of the cell breathing algorithm or decrease of cell pilot. If the value is too gr increase 0~10, step:0.1 This parameter specifies the peak rate. 1. Physical unit: cell/s or kbit/s 2. The peak rate cannot exceed the maximum bandwidth of the bearer such as the IMA group, UNI link, or optical port. 3. The peak rates for different types of services are as follows: CBR: 71 to 353207 (UT = CELL/S)/30 149759 (UT = KBIT/S); RTVBR/NRTVBR/UBR: 71 to 70754 (UT = CELL/S)/30 - 30000 (UT = Interval Type 30~353207 30 to 353207 KBIT/S).
Power control switch. 1) PC_AMR_MODE_INDUC E_BLER_ALTER_SWITC H: When the switch is on, the target BLER value of the AMR speech service is the target BLER value of each mode in the AMRC parameter table. When the switch is not on, the target BLER value of the AMR speech service is the target BLER value specified in TYPRAB. 2) PC_DL_INNER_LOOP_P C_ACTIVE_SWITCH: When the switch is on, the status of inner loop DL power control is set to "Active." When the switch is not on, the status is set to "Inactive." 3) PC_DOWNLINK_POWER _BALANCE_SWITCH: When the switch is on, the RNC supports DL power balancing. During soft handover, TPC bit errors may cause DL power drift. DL power balancing is Bit Field Type PC_AMR_MODE_INDUCE_BLER_ALTER_SWITCH, PC_DL_INNER_LOOP_P PC_AMR_MODE_INDUCE_BLER_ALTER_SWITCH enabled to balance the DL PENDING time length of M3UA linkType Interval set. 1~10 1~10 This parameter specifies the period of sending EthOAM PDU 20, 50, 100, 200, 500, 1000 Enumeration Type 10, packets. 10,20,50,100,200,500,1000 This parameter specifies the length of an EthOAM PDU packet. Interval Type 64~1024 64 to 1025
Indicating the corresponding Interval Type the cell in a RNCPOOL in RNC Node Redundancy function. peer cell ID of 0~65535 0~65535 This parameter specifies the peer IP address. IP Address Type 0.0.0.0~255.255.255.255 This parameter specifies the peer IP address for the MLPPP group. IP Address Type 0.0.0.0~255.255.255.255 This parameter specifies the destination IP address of the IP loopback test. IP Address Type 0.0.0.0~255.255.255.255 First destination IP address. 0IP Addressan invalid value. indicates Type 0.0.0.0~255.255.255.255 Second destination IP address. 0Address Typeinvalid value. IP indicates an 0.0.0.0~255.255.255.255
This parameter specifies the peer IP address. IP Address Type 0.0.0.0~255.255.255.255 Peer IP address. This parameter Address Type to the local IP address configured in the RNC. IP cannot be equal 0.0.0.0~255.255.255.255
Indicating peer cell is valid or not. Enumeration Type INVALID(Invalid), VALID(Valid) Invalid Valid, Peer subnet mask. IP Address Type 0.0.0.0~255.255.255.255 This parameter specifies the NodeB ID configured in another RNC of the RNC POOL. 0~65535Node Redundancy function, the two RNCs form Interval Type 0~65535 In RNC Destination port of the SCTPInterval Type link. 1024~65535 1024~65535 This parameter specifies the RNC ID Type peer RNC in the RNC POOL. Interval of the 0~4095 0~4095 This parameter specifies the peer type of IPoA PVC. Enumeration Type IUB, IUPS, OTHER IUB, IUPS, OTHER
The length of the penalty timer of Inter-Rat handover failure due to physical channel failure. No try of Inter-Rat handover will be taken until penalty finishes. Also see parameter InterRatPhyChFailNum.
Interval Type 0~65535 0~65535 Strech for penalty of inter-RAT handover failure. No try of0~300 Interval Type inter-RAT handover to the penalty cell will be taken until penalty finishes. 0~300 This parameter specifies the pending-time-after-trigger forD250, D500, D1000, 4A on DCH. 500, traffic-related event 4A on DCH is not reporte Enumeration Type traffic-related event D2000, 250, The 1000, 2000, 4000, 8000, 16000 D4000, D8000, D16000 This parameter specifies the pending-time-after-trigger forD250, D500, D1000, 4B on DCH. 500, traffic-related event 4B on DCH is not reported Enumeration Type traffic-related event D2000, 250, TheD8000, 2000, 4000, 8000, 16000 D4000, 1000, D16000 This parameter specifies the number of pending periods after event A is triggered. During the pending time, no event related to retransmission ra Interval Type 0~1000 0~1000 This parameter specifies the number of pending periods after event B is triggered. During the pending time, no event related to retransmission ra Interval Type 0~1000 0~1000 IP Path Ping Period. Interval Type 1~60 1~60
2B event retry period. This parameter defines the length of the event 2B retry period. The smaller the value of this parameter, the more frequent the handover retry due to inter-frequency handover failure, and the faster the UE to be successfully handed over to the target cell whose load is restored, thus lowering the probability of call drops. In this case, however, frequent handover retry brings more load to the RNC system. Interval Type Retry period for the event 2C. This parameter defines the length of the event 2C retry period. The smaller the value of this parameter, the more frequent the handover retry due to inter-frequency handover failure, and the faster the UE to be successfully handed over to the target cell whose load is restored. In this case, however, frequent handover retry brings more load to the RNC system. Interval Type Retry period for the event 3A. This parameter defines the length of the event 3A retry period. The smaller the value of this parameter, the more frequent the handover retry due to inter-RAT handover failure, and the faster the UE to be successfully handed over to the target cell whose load is restored, thus lowering the probability of call drops. In this case, however, frequent handover retry brings more load to the RNC system. Interval Type 1~64 500~32000,Step:500 1~64 500~32000,Step:500
1~64
500~32000,Step:500
Retry period for the event 3C. This parameter defines the length of the event 3C retry period. The smaller the value of this parameter, the more frequent the handover retry due to inter-RAT handover failure, and the faster the UE to be successfully handed over to the target cell whose load is restored, thus lowering the probability of call drops. In this case, however, frequent handover retry brings more load to the RNC system. Interval Type 1~64 500~32000,Step:500
This parameter specifies the number of reporting times of event 1AD4, D8, D16, D32, D64, INFINITY 64, INFINITY Enumeration Type D1, D2, for periodical reporting. When the actual reporting times exceeds the set val 1, 2, 4, 8, 16, 32,
This parameter specifies the number of reporting times of event 1CD4, periodicalD32, D64, When the32, 64, INFINITY Enumeration Type D1, D2, for D8, D16, reporting. INFINITY 1, 2, 4, 8, 16, actual reporting times exceeds the set valu
This parameter specifies the number of reporting times of event 1J D4,periodical reporting. When 16, 32, 64, reporting times exceeds the set valu Enumeration Type D1, D2, for D8, D16, D32, D64, INFINITY 1, 2, 4, 8, the actual INFINITY
Period common measurementInterval Type protection timer coefficient. 2~65535 Timer length of common measurement report protection = max (10000, this paramete 2~65535 It is used to calculate the corresponding dynamic persist scaling factor for ASC2~ASC7. It is valid forD0.2 0.4, 0.3, 0.2and mandatory. For de Enumeration Type D0.9, D0.8, D0.7, D0.6, D0.5, D0.4, D0.3,0.6, 0.5, 0.9, 0.8, 0.7, ASC2-ASC7 only
This parameter specifies whether to enableType Enumeration the protocol field compression switch for theDisable(Not support Protocol field compress), Enable(Su Disable, Enable PPP link. This parameter specifies the PHB to be activated with the IP PM. AF11(AF11), AF12(AF12), AF13(AF13), AF21(AF21), AF22(AF22), AF2 Bit Field Type BE(BE), BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,A PHB value. Enumeration Type BE, AF11, AF12, AF13, AF21, AF22, AF23, AF13 AF21 AF22 AF23 AF31 AF32 A BE AF11 AF12 AF31, AF32, AF33, AF41, AF42, AF4
Uniquely identifying a common physical channel in a cell. 0~255 Interval Type 0~255 ID of the physical channel carrying the MCCH. Interval Type 1~255 1~255 Uniquely identifying a PICH Interval Type in a cell. 0~255 0~255 Indicating the number of PIs Enumeration each frame of the PICH ForV72, V144 contained in Type V18, V36, detailed information 36,this parameter, refer to 3GPP TS 25.211. 18, of 72, 144 Difference between the transmit power of PICH and that of PCPICH. If the value is set -10~5 Interval Type -10~5 too small, the UEs on the cell edge cannot receive the pa This parameter specifies the number of the slot that holds the PIU. Interval Type 14~27 14 to 27 This parameter specifies the number of packets for starting5~64EthOAM loopback test. 5 to 64 Interval Type the This parameter specifies the length ofType for starting the EthOAM loopback test. 64 to 1024 Interval packet 64~1024 This parameter specifies the maximum length of a loopback packet. Interval Type 10~1500 10 to 1500 This parameter specifies the size of the ping packets. Interval Type 20~1024 20 to 1024 This parameter specifies the size of a Typepacket. Interval sent 95~512 95 to 512
Maximum PLMN tag value corresponding to a LAC. It is defined by the operator. For detailed information of this parameter, refer to 3GPP TS Interval Type 1~256 1~256
Minimum PLMN tag value corresponding to a LAC. It is defined by the operator. For detailed information of this parameter, refer to 3GPP TS 2 Interval Type 1~256 1~256 This parameter specifies the period ofType Interval measuring the packet loss rate. 1~100 100~10000 This parameter specifies the threshold of discarding packets. Interval Type 0~1000 0~1000 This parameter specifies the interval for sending IP PM packets. Interval Type 1~100 100 to 10000
This parameter specifies the number of an Ethernet port. 0~7 Interval Type FG2a board: 0 to 7, GOUa board: 0 to 1 This parameter specifies the number of a port. Interval Type 0,2,4,6,8 0,2,4,6,8 For the FG2a board, the port number ranges from 0 to 7. For the GOUa board, the port number ranges from 0 to 1. Interval Type 0~7 0 to 7 This parameter specifies the number of the physical port where the local MEP in the current 7 Interval Type 0~7 0 to MA resides. This parameter specifies the number of a port. Interval Type 0~7 0 to 7 This parameter specifies the number of an Ethernet port. 0~7 Interval Type For the FG2a board, the value range of PN is 0 to 7. For This parameter specifies the number of a port. Interval Type 1~32 1 to 32 This parameter specifies the description of the rollback point. String Type 0 to 250 characters This parameter specifies the name of the rollback point. String Type 1 to 250 characters
Timer length of the queue poll. The queue is polled for every time specified in this parameter. During each poll, all the expired users are remove Interval Type 1~80 10~800 UNI: 500~10000 NNI: the peer Interval for sending POLL message.ItType Interval generally indicates the duration of a message arrives at90~500 end and returns. 50~10000 This parameter specifies the port provided the FTP server to be accessed by the FTP client. Interval Type 21~65535 21~65535 This parameter specifies the protocol type of the port. Enumeration Type IP, ATM IP, ATM This parameter specifies the type of the physical port where the local MEP in an MA resides. "FE" indicates an FE port. "TRUNK" indicates a T Enumeration Type ETHER, TRUNK ETHER,TRUNK This parameter specifies the switch for relay 1. Enumeration Type CLOSE(Close), OPEN(Open) CLOSE,OPEN This parameter specifies the switch for relay 2. Enumeration Type CLOSE(Close), OPEN(Open) CLOSE,OPEN This parameter specifies the switch for relay 3. Enumeration Type CLOSE(Close), OPEN(Open) CLOSE,OPEN This parameter specifies the switch for relay 4. Enumeration Type CLOSE(Close), OPEN(Open) CLOSE,OPEN This parameter specifies the switch for relay 5. Enumeration Type CLOSE(Close), OPEN(Open) CLOSE,OPEN
This parameter specifies the switch for relay 6. Enumeration Type CLOSE(Close), OPEN(Open) CLOSE,OPEN The power offset between theInterval Type last access preamble and the-5~10 message control part. The power of the message control part can be obtained by addi -5~10 The power increase step of the random access preambles transmitted before the UE receives the acquisition indicator in the random access proce Interval Type 1~8 1~8 This parameter specifies the PPP port IP Type for the DHCP server. IP Address address 0.0.0.0~255.255.255.255 This parameter specifies the number of a PPP link. Interval Type 0~3 0~3
0~167
If this parameter is set to Enable, the frameType Enumeration multiplexing over the PPP link is enabled. IfDisable(Not support PPP mux),Enable(Support PPP mux Disable, Enable this parameter is set to Disable, the frame multiplexing This parameter is valid only when theType flow control type is IP. The "PQNUM" of an 0 to 5 queue is "2" by default. You cannot change the de Interval port 0~5 ATM Uniquely identifying a PRACH in a cell corresponding to the AICH. Interval Type 0~255 0~255 Inter-frequency measurement reporting interval. In periodical report mode, the interval between two reports is the configured value. However, it is not recommended that the value "NON_PERIODIC_REPO RT" be set, upon which the UE behaviour is not defined. This parameter has impact on the Uu signaling flow. If the interval is too short and the frequency is too high, the RNC may have burden in processing signaling. If the interval is too long, the network cannot detect the signal change in time, which may delay the interfrequency handover and thus cause call drops.
Enumeration Type NON_PERIODIC_REPORT(Non periodical reporting), D250~1 D500~2 D1000~3 D NON_PERIODIC_REPORT,250,500,1000,2000,3000,4 The maximum number of preambles transmitted in a preamble ramping cycle. If the value of Max preamble retransmission is too small, the prea Interval Type 1~64 1~64 Sequence No. of an availableBit Field Type preamble signature. A maximum of 16 signatures (from signature 0 to 15) can be selected. For detailed informatio SIGNATURE0, SIGNATURE1, SIGNATURE2, SIGNATURE3, SIGNATURE4, SI SIGNATURE0, SIGNATURE1, SIGNATURE2, SIGNA Indicating whether preemption is supported. Enumeration Type OFF, ON OFF, ON Indicating whether ARP-based preemptionType Enumeration between TCs isOFF, ON This switch only OFF, ON on the TC-based priorities. When the priority supported. has impact
1.There are three block priorities: high, normal and low. 2.High priority: Blocking a cell immediately. 3.Normal priority: Blocking a cell once there are no users in it within a specified time, or blocking it even if there are some users when the specified time expires. 4.Low priority: Blocking a cell when there are no users in the cell. Enumeration Type This parameter specifies the priority of an IP route. Enumeration Type HIGH(High priority), NORMAL(Normal priority), LOW(Low priority) HIGH, NORMAL, LOW HIGH, LOW HIGH, LOW
Priority of the signalling link.Interval Type highest priority. 0 indicates the 0~99
0~99
Route priority. 0 indicates theInterval Type highest priority. Reference used to determine which priority is arranged first in the priority sequence. If the ARP is preferably used, the priority sequence is gold > silver > copper. If the ARPs are all the same, the TrafficClass is used and the priority sequence is conversational > streaming > interactive > background. If the TrafficClass is preferably used, the priority sequence is conversational > streaming > interactive > background. If the TrafficClass factors are all the same, the ARP factor is used and the priority sequence is gold > silver > copper.
0~99
0~99
Enumeration Type ARP, TrafficClass ARP,TrafficClass This parameter specifies the capability of the cells with a specific [Service priority group Identity] for extension services, such as CMB and MB Interval Type 0~7 0~7
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for HSDPA services. The value 0 means that Interval Type 0~7 0~7 This parameter specifies the capability of the cells with a specific [Service priority group Identity] for HSUPA services. The value 0 means that Interval Type 0~7 0~7 This parameter specifies the capability of the cells with a specific [Service priority group Identity] for R99 non-real-time services. The value 0 m Interval Type 0~7 0~7 This parameter specifies the capability of the cells with a specific [Service priority group Identity] for R99 real-time services. The value 0 mean Interval Type 0~7 0~7 This parameter specifies the processing duration of the cell blocking in the RNC. Interval Type 2~30 2~30 1) INVOKE_TRACE_SWITC H. When it is checked, RNC will start Invoke Trace procedure upon receiving INVOKE TRACE Message form CN, otherwise, RNC won't start the Invoke Trace procedure though it receives the INVOKE TRACE message. 2) SYS_INFO_UPDATE_FO R_IU_RST. When it is checked, RNC will broadcast SYSTEM INFORMATION messages to UE when Iu reset, otherwise, RNC won't broadcast SYSTEM INFORMATION messages to UE when IU reset. 3) DRNC_DIRECT_DSCR. When it is checked, DRNC will start DSCR procedure directly in RRC states other than CELL_DCH, otherwise, DRNC will transfer RRC CELL UPDATE message to SRNC. 4) Bit Field Type INVOKE_TRACE_SWITCH, SYS_INFO_UPDATE_FOR_IU_RST,to the related do This parameter is set to 0 or 1 according DRNC_DIREC RNC_SHARE_SWITCH. SS7 protocol type supported by the DSP. ITUT: International Telecommunication Union Telecommunication Standardization Sector ANSI: American National Standards Institute TTC: THE TELECOMMUNICATION TECHNOLOGY COMMITTEE (use for JAPAN). Enumeration Type ITUT, ANSI, TTC ITUT, ANSI, TTC
If the background Radio Access Bear Type T1 expired,the0~60 will send RRC release request message to RRC layer and start timer T2,after s Interval timer PDCP 0~60
If the Conversational Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2,aft Interval Type 0~60 0~60 If the IMS Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2, after sending release request to RRC layer, if the IMS Radio Access Bear for signal haven't been released until the IMS service T2 timeout, the PDCP layer will resend release request indication. Interval Type
0~60
0~60
If the Interactive Radio Access Bear timer T1 expired,the PDCP will send RRC release 0~60 message to RRC layer and start timer T2,after se Interval Type 0~60 request
If the Streaming Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2,after se Interval Type 0~60 0~60 This parameter specifies whether to select a single port or all ports on aall ports), SINGLE(Select one port) Enumeration Type ALL(Select board. ALL,SINGLE Indicating whether to replaceEnumeration Type with DSCR procedure between the RNC and the neighboring RNC for PS BE Traffic. relocation procedure CORRM_SRNSR_PSBE_RELOC, CORRM_SRNSR_PSBE_DSCR CORRM_SRNSR_PSBE_RELOC,CORRM_SRNSR_P
0~100
0~100
R99 PS background primary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF R99 PS background bearing primary path load threshold. 0~100 Interval Type 0~100
R99 PS background secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF R99 PS background primary secondary path load ratio threshold. Interval Type 0~100 0~100 R99 PS background service uplink factor. Interval Type 0~100 0~100 Offset of the PSCH transmit power from the PCPICH transmit power in a cell. If the value is excessively low, UEs at the edge of cells fail in ne Interval Type -350~150 -35~15, step: 0.1 R99 PS conversational service downlink factor. Interval Type 0~100 0~100
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
R99 PS conversational bearing primary path load threshold. Interval Type 0~100
0~100
R99 PS conversational secondary path. Type Enumeration CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF R99 PS conversational primary secondary path load ratio threshold. Interval Type 0~100 0~100 R99 PS conversational service uplink Type Interval factor. 0~100 0~100
Sequence No. of a DL primary scrambling code in a cell. For detailed information of this parameter, refer to 3GPP TS 25.413. Interval Type 0~511 0~511 R99 PS high priority interactive bearing primary path load 0~100 Interval Type threshold. 0~100 R99 PS high priority interactive primary secondary path load ratio threshold. Interval Type 0~100 0~100 PS domain Relocation GSM load THD. This parameter specifies the PS domain relocation GSM load threshold. When the GSM load policy is used, that is, when [NcovHoOn2GldInd] in SET INTERRATHONCOV is set to ON, the PS domain inter-system relocation out process will be stopped if the GSM system send its cell load to the RNC and the cell load exceeds the PS domain Reloc GSM load THD. Otherwise, the RNC does not stop the PS domain inter-system relocation out process. Interval Type
0~100
0~100%
When detecting that the Ps' Background User had no data to transfer for a long time which longer than this timer, the PDCP layer would request Interval Type 0~14400 0~14400
When detecting that the Ps' Conversational User had no data to transfer for a long time which longer than this timer, the PDCP layer would requ Interval Type 0~14400 0~14400
When detecting that the Ps' IMS signal had no data to transfer for a long time which longer than this timer, the PDCP layer would request the RR Interval Type 0~64800 0~64800
When detecting that the Ps' Interactive User had no data to0~14400 for a long time which longer than this timer, the PDCP layer would request t Interval Type transfer 0~14400
When detecting that the Ps' Streaming User had no data to 0~14400for a long time which longer than this timer, the PDCP layer would request th Interval Type transfer 0~14400 Indicating whether the PS domain permits the CN information toON Enumeration Type OFF, update . OFF, ON Ps Information Update protection timer. Interval Type 60~900 60~900 R99 PS interactive service downlink factor. Interval Type 0~100 0~100 R99 PS interactive service uplink factor. Interval Type 0~100 0~100
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF
R99 PS middle PRI interactive secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF R99 PS low priority interactive bearing primary path load threshold. Interval Type 0~100 0~100 R99 PS low priority interactive primary secondary path load ratio threshold. Interval Type 0~100 0~100 R99 PS middle priority interactive bearing primary path load threshold. Interval Type 0~100 0~100 R99 PS middle priority interactive primary secondary path 0~100 Interval Type load ratio threshold. 0~100
This parameter specifies feature mode of operators in the PS domain. YouSUPP_IUFLEX, SUPP_MOCN, SUPP_IUFLEX_MOCN Enumeration Type SUPP_NONE, should configure the network resource identifier (NRI) when MOCN SUPP_NONE,SUPP_IUFLEX,SUPP_MOCN,SUPP_IU NRI length for PS domain. Interval Type 1~10 1~10 PS CDR(Call Drop Ratio) Per Spu, if Type Interval the ratio is higher than this threshold in a checking period, need arise KPI alarm. 0~100 0~100 The minimum number of PS service setup attempt Per Spu, the sum of PS setup attempt0~65534be higher than this threshold to arise KPI alarm Interval Type 0~65534 need to Successful PS service setup ratio Per Spu, if the ratio is lower than this threshold in a checking period, need arise KPI alarm. Interval Type 0~100 0~100 The minimum number of PS release Per Spu, the sum of PS release need to be higher than this threshold to arise KPI alarm which type is PS cal Interval Type 0~65534 0~65534
Whether to impose the accessEnumeration TypePS domain. restriction on the FALSE, TRUE
FALSE,TRUE
Indicating whether the cell allows PS service interRAT handover. ON: PS service inter-RAT handover is enabled. OFF: PS service inter-RAT handover is disabled. Service handover refers to the handover attribute and related parameter configuration on the network side for each service. When a service is established, the related measurements and interRAT handover are immediately triggered. These two switches are enabled only for service handover; generally, they are disabled by default. Note that the service handover is enabled only when the handover attribute is set to HO_TO_GSM_SHOULD_ BE_PERFORM and PS service inter-RAT handover is set to ON. Both conditions are mandatory. For hybrid services, the service handover is not triggered. Enumeration Type R99 PS streaming service downlink factor. Interval Type
ON,OFF 0~100
R99 PS streaming primary path. Enumeration Type R99 PS streaming bearing primary path load threshold. Interval Type
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF 0~100 0~100
R99 PS streaming secondary Enumeration Type path. CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF R99 PS streaming primary secondary Type load ratio threshold. Interval path 0~100 0~100 R99 PS streaming service uplink factor. Interval Type 0~100 0~100 PS rate negotiation switch. 1) PS_BE_EXTRA_LOW_R ATE_ACCESS_SWITCH: When the switch is on, access at a rate of 0 kbit/s or on the FACH is determined according to the current connection state of the RRC if the PS BE admission and the later preemption and queuing fail. 2) PS_BE_INIT_RATE_DYN AMIC_CFG_SWITCH: When the switch is on, the initial rate of the service should be dynamically configured according to the value of Ec/No reported by the UE when the PS BE service is established. 3) PS_BE_IU_QOS_NEG_S WITCH: When the switch is on, the Iu QoS Negotiation function is applied to the PS BE service if Alternative RAB Parameter Values IE is present in the RANAP RAB ASSIGNMENT Bit Field Type PS_BE_EXTRA_LOW_RATE_ACCESS_SWITCH, PS_BE_INIT_RATE_DYNAM PS_BE_EXTRA_LOW_RATE_ACCESS_SWITCH, PS REQUEST or The total PS throughput of all the operators cannot exceed 0~3910000 in the license file. to 3910000 Interval Type that defined 0 This parameter specifies the type of the port. Enumeration Type BOOL(Digital Port), VALUE(Analog Port) BOOL,VALUE This parameter specifies the IP address for the NodeB FE port. IP Address Type 0.0.0.0~255.255.255.255 This parameter specifies the subnet maskType IP address of the NodeB FE port. IP Address for the 0.0.0.0~255.255.255.255
This parameter specifies whether MBMS PTM non-streaming bearers can be pre-empted by OFF MBMS PTM bearers or non-MBMS bearers. Enumeration Type ON, OFF ON, other This parameter specifies whether MBMS PTM streaming bearers can pre-empt other MBMS PTM bearers and non-MBMS bearers. If this para Enumeration Type ON, OFF ON, OFF This parameter specifies whether MBMS PTM streaming bearers can be pre-empted byON, OFF Enumeration Type ON, OFF other MBMS PTM bearers or non-MBMS bearers. If th This parameter specifies the type of an Ethernet port. Enumeration Type FE, GE FE, GE Length of smoothing filter window ofType Interval potential user control (PUC). 1~32 1~32
Identifying the potential user Interval period. When the cell6~86400 control Type load is high, the cell selection and reselection can be periodically modified in order t 6~86400 This parameter specifies the coefficient of the penalty time0~60 the PTP RB admission 0~60 The penalty time is MCCH modification period m Interval Type after fails. This parameter is used to inform the UE ofType Enumeration the method for ALGORITHM1, ALGORITHM2Power Control (TPC) commands. In other words, it translating the received Transmit ALGORITHM1, ALGORITHM2 This parameter specifies the minimum DSCP value of queue 0. The IP packet with the DSCP value within the range (63, minimum DSCP value Interval Type 0~63 0 to 63 This parameter specifies the minimum DSCP value of queue 1. The IP packet with the DSCP value within the range (minimum DSCP value of q Interval Type 0~63 0 to 63 This parameter specifies the minimum DSCP value of queue 2. The IP packet with the DSCP value within the range (minimum DSCP value of q Interval Type 0~63 0 to 63 This parameter specifies the minimum DSCP value of queue 3. The IP packet with the DSCP value within the range (minimum DSCP value of q Interval Type 0~63 0 to 63 This parameter specifies the minimum DSCP value of queue 4. The IP packet with the DSCP value within the range (minimum DSCP value of q Interval Type 0~63 0 to 63 Function set supported by theEnumeration Type adjacent node The value CS1 (or CS2) CS1, CS2that the local end connects to the adjacent node local RNC for the CS1, CS2 indicates
Quality threshold of HCS cell reselection. It can be used to0~99 Interval Type calculate the quality level of0~99 the specified cell in HCS reselection H rules.
This parameter indicates that in the CELL_FACH connection mode, the measurement hysteresis of the UE is 1. It is used when CPICH RSCP is used in cell selection and reselection measurement. This parameter is not configured when the value is 255. Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed inforamtion, refer to 3GPP Interval Type TS 25.304. This parameter indicates that in the CELL_PCH or URA_PCH connection mode, the measurement hysteresis of the UE is 1. It is used when CPICH RSCP is used in cell selection and reselection measurement. This parameter is not configured when the value is 255. Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed inforamtion, refer to 3GPP TS 25.304. Interval Type This parameter indicates that in the CELL_FACH connection mode, the measurement hysteresis of the UE is 2. It is used when CPICH EcNo is used in cell selection and reselection measurement. This parameter is not configured when the value is 255. Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed inforamtion, refer to 3GPP TS 25.304. Interval Type
0~40,255
{0~40},{255}
0~40,255
{0~40},{255}
0~40,255
{0~40},{255}
This parameter indicates that in the CELL_PCH or URA_PCH connection mode, the measurement hysteresis of the UE is 2. It is used when CPICH EcNo is used in cell selection and reselection measurement. This parameter is not configured when the value is 255. Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed inforamtion, refer to 3GPP TS 25.304. Interval Type Offset between the neighboring GSM cell and WCDMA cell. This specifies the offset of the measurement value of the neighboring GSM cell signal quality. This parameter is used for RSSI measurement. The offset is subtracted from the neighboring cell measurement value before cell reselection. In cell reselection algorithm, this parameter is used for moving the border of a cell. Content: During cell selection or resection, the larger the value of the parameter, the smaller the probability of selecting interRAT neighboring cells. The smaller the value of the parameter, the larger the probability of selecting interRAT neighboring cells. This parameter can be configured by the network planner according to reality. For details, refer to 3GPP TS 25.331. As for the impact on network performance: Interval Type The larger the value of the
0~40,255
{0~40},{255}
-50~50
-50~50
The minimum required quality threshold corresponding to -24~0 Ec/No. The UE can camp on the cell only when the measured CPICH Ec/No Interval Type CPICH -24~0
This parameter indicates whether to configure the minimum quality level. When minimum quality threshold), FALSE(Not configure the minimu Enumeration Type TRUE(Configure the it is setTRUE,FALSE UE adopts the corresponding value of th to FALSE, the Minimum RX level of the GSM cell. Before the UE camps on the cell, take the measurement of the signal quality in the cell. If the quality is better than this parameter, this indicates that the cell can obtain better QoS and the UE is allowed to camp on this cell. Otherwise, the UE cannot obtain good QoS in this cell and does not camp on the cell. Interval Type -58~-13 -115~-25,Step:2
The minimum required RX threshold Type Interval corresponding to CPICH RSCP. The UE can camp on the cell only when the measured CPICH RSCP is gr -58~-13 -115~-25, step:2
Indicating whether the minimum required RX level is extended. For detailed information of this parameter, refer to 3GPP TS 25.304. Enumeration Type TRUE, FALSE TRUE,FALSE This parameter indicates whether to configure the minimum RX level. Whentheis set to FALSE, the UE adopts the FALSE(Not configure the mi Enumeration Type TRUE(Configure it minimum signal level for access), corresponding value of the cu TRUE,FALSE Measurement quantity of cellEnumeration Type selection and reselection. It can be set to CPICH Ec/N0 orCPICH_ECNO, For detailed information of this paramet CPICH_ECNO(CPICH Ec/N0), CPICH_RSCP(CPICH RSCP) CPICH RSCP. CPICH_RSCP Indicating whether queue is supported. When a user initiates a call, if cell resources are OFF, ON and the user is queue supportive, the RNC tr Enumeration Type OFF, ON insufficient Queue length. The total number of users in queue of each cell should not exceed the value specified in this parameter. When a new user needs q Interval Type 5~20 5~20
This parameter specifies the index number that identifies the configuration of a typical RAB. Interval Type 0~99 0~99 The timer is started when the Interval Type the RAB Modify procedure. If RAB modify1~65535 is received from the CN when this timer is act RNC initiates 1~65535 message
Identifying a routing area in a location area for a PLMN of0~255 Interval Type GSM-MAP type. It is defined by the operator. For detailed information of this param 0~255 Sequence No. of an availableBit Field Type maximum of SUBCHANEL0, (from sub channelSUBCHANEL2, SUBCHANEL3, SUBCHANEL4 sub channel. A 12 sub channels SUBCHANEL1, 0 to 11) can be selected. For SUBCHANEL2, SUB SUBCHANEL0, SUBCHANEL1, detailed information A timer used to wait for the reset response from CN. Interval Type 10000~240000 10000~240000 When RAN Sharing Supported,RNC can configure multi-plmn.YES Enumeration Type NO, NO,YES Identifying the type of the inter-RAT cell NO_CAPABILITY indicates that the capacity of theunknown), remains unknown.EDGE recommend Enumeration Type NO_CAPABILITY(Cell capability GSM cell GSM~1 GPRS~2 It is not NO_CAPABILITY,GSM,GPRS,EDGE A timer used to respond to CN reset. Type Interval 0~240000 0~240000
The rate matching factor of a Interval Type transport channel.For detailed information of this parameter, refer to 3GPP TS 25.212. 1~256 1~256 DL fast TF restriction refers to a situation where, when the1~65535 Interval Type cell is overloaded and congested, the downlink TF can be adjusted to restrict the num 1~65535 DL fast TF restriction refers to a situation where, when the1~99is overloaded and congested, the downlink TF can be adjusted to restrict the num Interval Type cell 0.01~0.99, step:0.01 DL fast TF restriction refers to a situation where, when the1~65535 Interval Type cell is overloaded and congested, the downlink TF can be adjusted to restrict the num 1~65535
This parameter specifies the name of the rollback point. The target rollback point must exist 250 characters String Type 0 to and must be subsequent to the current point. This parameter specifies the type of rollback point. LASTRBP indicates the last rollback point, which can be set by the user or the calculated po Enumeration Type LASTRBP(last rollbackpoint), APPOINTRBP(appointed rollbackpoint) LASTRBP,APPOINTRBP A timer used to wait for the RB reconfiguration response from UE in the RB procedure.300~10000 Interval Type 300~10000 A timer to RNC wait for the RB release response from UE300~10000 Interval Type in the RB procedure. 300~10000 A timer to RNC wait for the RB setupType Interval response from UE in the RB procedure. 300~10000 300~10000 This parameter specifies the rate down coefficient of the logical port. Interval Type 0~100 0~100 This parameter specifies the interval between recounting operations. Interval Type 1~360 10~3600, step: 10 DL fast TF restriction refers to a situation where, when the100~200 Interval Type cell is overloaded and congested, step:0.01 1~2, the downlink TF can be adjusted to restrict the num
This parameter specifies the decrease Typealarm recover threshold. Interval rate 20~99 This parameter specifies whether to back up the board. YES, NO Enumeration Type
20~99 YES, NO
This parameter specifies the target frequency band in the redirection procedure. Band4, Band5, Band6, Band7, Band8, Band9, DependOnNCe Enumeration Type Band1, Band2, Band3, Band1, Band2, Band3, Band4, Band5, Band6, Band7, B
When the UL load state or DL load state of the serving cell is LDR or OLC, a UE may be redirected to another cell according to the traffic type. Interval Type 0~100 0~100
When the load of the serving Interval Type the normal range, a UE may be redirected to 0~100 cell according to the traffic type. This parameter cell is within 0~100 another
This parameter specifies whether the RRC Type Enumeration redirection algorithmONLY_TO_INTER_FREQUENCY, ONLY_TO_INTER_RAT the RRC red OFF, is valid for the specified service. The algorithm is valid only when OFF,ONLY_TO_INTER_FREQUENCY,ONLY_TO_IN
This parameter specifies the target downlink UARFCN of 0~16383 RRC redirection. 0~16383 Interval Type a cell for
This parameter specifies the target uplink UARFCN of a cell for RRC redirection. Depending on the band indication, the value range as shown below: Band1: Common frequencies: [9612-9888] Special frequencies: none Band2: Common frequencies: [9262-9538] Special frequencies: {12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287} Band3: Common frequencies: [9371288] Special frequencies: none Band4: Common frequencies: [1312-1513] Special frequencies: {1662, 1687, 1712, 1737, 1762, 1787, 1812, 1837, 1862} Band5: Common frequencies: [4132-4233] Special frequencies: {782, 787, 807, 812, 837, 862} Band6: Interval Type Common frequencies:
0~16383
0~16383
This parameter specifies whether the UL frequency of the target cell of redirection needs to be configured. - TRUE: The UL frequency needs to be configured. - FALSE: The UL frequency does not need to be configured. It is configured automatically according to the relationship between UL and DL frequencies.
Enumeration Type
TRUE, FALSE
TRUE, FALSE
This parameter specifies the link No. Type clock source of the output clock. Interval of the 0~31
0 to 31
This parameter specifies the backup link No. of the clock source of the output clock. 0 to 31 Interval Type 0~31 This parameter specified the output switch TypeMHz output clock 1. Enumeration of 2 OFF, ON OFF, ON This parameter specified the output switch TypeMHz output clock 2. Enumeration of 2 OFF, ON OFF, ON Indicates whether register beared by fach under call shock OFF, ON Enumeration Type control. This function only applies under NodeB level or cell level call shock control. OFF,ON This parameter specifies re-host policy type for NodeB. The value "REHOSTRIGHTNOW" indicates to perform re-host policy for the NodeB im Enumeration Type REHOSTRIGHNOW(RehostRighNow), REHOSTDELAY(RehostDelay), REHOSTW RehostRighNow, RehostDelay, RehostWhen This timer is started when an Intervalsignaling entity sends 2000~60000 AAL2 Type the service user an indication2000~60000 an AAL2 connection. for releasing A timer to RNC wait for another relocation request in relocation procedure. Interval Type 1~10000 1~10000 A timer to RNC wait for the relocation command message 1~20000 Interval Type in relocation procedure. 1~20000 A timer to RNC wait for rnsap relocation commit message 1~20000 Interval Type in relocation procedure. 1~20000 A timer used for data forwarding in relocation procedure. 1~20000 Interval Type 1~20000 A timer to RNC wait for Iu release command in the failed relocation procedure. Interval Type 1~10000 1~10000 A timer to RNC wait for the Iu release command message 1~60000 Interval Type in relocation procedure. 1~60000 A timer to RNC wait for mobile information confirmation in relocation procedure. Interval Type 1~10000 1~10000 A timer to RNC wait for the response Type Interval to physical channel reconfiguration in relocation procedure. 1~10000 1~10000 A timer to RNC wait for inter-RAT handover completion in relocation procedure. Interval Type 1~20000 1~20000 This timer is started when an Intervalsignaling entity sends 2000~60000 a request for releasing an AAL2 connection. AAL2 Type the peer node 2000~60000
This parameter specifies the threshold of immediate rate reduction after the soft handover failure. The rate reduction of the active set and the SHO retry procedure can be triggered without the intra-frequency reporting event reported, when the quality of the cell in the active set fulfills the following conditions. The formula of direct SHO rate reduction is new > Mbest_cell RelThdForDwnGrd where Mnew: the CPICH Ec/No measurement value of the failed cell1 Mbest_cell: the CPICH Ec/No measurement value in the latest measurement report of the best cell identified by the RNC according to 1D RelThdForDwnGrd: the relative threshold for direct rate reduction. It can be configured on the BAM server. Note: The smaller the value of this parameter, the harder Interval Type it is to trigger SHO rate
-29~29
-14.5~14.5,Step:0.5
1 to 250 characters
Use description. String Type Repeat Number of send Write-Replace. Interval Type Repeat Period of send Write-Replace.Type Interval
0~65535 1~4096
This parameter specifies the reporting period of event 1A. NON_PERIODIC_REPORT, D250~1 D500~2 D1000~3 D2000~4 D4000~5 D8000~ Enumeration Type That is, event 1A is reported NON_PERIODIC_REPORT, 250, event1000, 2000, 400 at each reporting interval. Usually, 500, 1A is reported
This parameter specifies the number of reporting times of event 1C for periodical reporting. That is, event D1000~3 D2000~4 D4000~5 D8000~ Enumeration Type NON_PERIODIC_REPORT, D250~1 D500~2 1C is reported at500, 1000, 2000, 400 NON_PERIODIC_REPORT, 250, each reporting interv
This parameter specifies the number of reporting times of event 1J for periodical reporting. That is, event 1J is reported at eachD4000~5 D8000~ Enumeration Type NON_PERIODIC_REPORT, D250~1 D500~2 D1000~3 D2000~4 reporting interva NON_PERIODIC_REPORT, 250, 500, 1000, 2000, 400 This parameter specifies the 2G cell capability required byGSM, GPRS, EDGE from 3G networks toEDGE Enumeration Type inter-RAT handovers GSM, GPRS, 2G networks. If the 2G cell capability doe CORRM Algo reserved switch 0.Field switch is reserved for further change request use. RESERVED_SWITCH_0_BIT1, RESERVED_SWITCH Bit The Type RESERVED_SWITCH_0_BIT1, RESERVED_SWITCH_0_BIT2, RESERVED_SW CORRM Algo reserved switch 1.Field switch is reserved for further change request use. RESERVED_SWITCH_1_BIT1, RESERVED_SWITCH Bit The Type RESERVED_SWITCH_1_BIT1, RESERVED_SWITCH_1_BIT2, RESERVED_SW CORRM Algo reserved U32 IntervalThe para of 32 bits is 0~4294967295 para 0. Type reserved for further change request use. 0~4294967295 CORRM Algo reserved U32 IntervalThe para of 32 bits is 0~4294967295 para 1. Type reserved for further change request use. 0~4294967295 CORRM Algo reserved U8 para 0. The para of 8 bits is reserved for further change request use. Interval Type 0~255 0~255 CORRM Algo reserved U8 para 1. The para of 8 bits is reserved for further change request use. Interval Type 0~255 0~255 This timer is started when an Intervalsignaling entity sends 2000~60000 a request for resetting an AAL2 path. AAL2 Type the peer node 2000~60000
This parameter specifies the time length to restart the timer for the PPP link. Interval Type 2~5 2 to 5 Specifies the mode of restricting the access classes. Enumeration Type RestrictionFixed, RestrictionFlexible RestrictionFixed,RestrictionFlexible This parameter specifies the filter coefficient for retransmission ratio measurement. Interval Type 0~10 0~10 Each bit indicates whether to Bit Field corresponding HSPA technology. If a bit is SRB_OVER_HSUPA, TTI_2MS, MIMO, 64QAM, L2_ENH retry the Type SRB_OVER_HSDPA, set the 1, then the RNC retries the corresponding HSPA techn None This parameter specifies the work mode of RLC entity. - AM: Acknowledged Mode. Automatic Repeat Request (ARQ) is used in error correction. - UM: Unacknowledged Mode. Retransmission is not applied. According to the configuration, the data with errors is discarded or marked. - TM: Transparent Mode. No protocol overhead is added to the higher-layer data. The protocol data units with errors may be discarded or marked. For details of this parameter, refer to the 3GPP TS 25.322.
Enumeration Type
AM, UM, TM
AM, UM, TM
This parameter defines each transportType size corresponding in transport format. For 0~4992 channel, the RLC size reflects the actual tran Interval block 0~4992 a common This parameter should fulfill Interval Typerequirement of the network planning, and the-35~15, step:0.1 to [PCPICH transmit power]. If the par the coverage -350~150 value is relative This parameter should consider the maximum downlink transmit power and the dynamic range of power control, and the value is relative to [PC Interval Type -350~150 -35~15, step:0.1 A timer to RNC wait for the response Type link reconfiguration prepare in the radio link procedure. Interval to radio 1~10000 1~10000 A timer to RNC wait for the response Type link deletion1~10000 in the radio link procedure. Interval to radio request 1~10000 A timer to RNC wait for radio link restoration indication in the radio link procedure. 1~10000 Interval Type 1~10000 A timer to RNC wait for the response Type link setup request in the radio link procedure. Interval to radio 1~10000 1~10000
Uniquely identifying an RNC. Interval Type IP address of the RNC. IP Address Type RncPool index. Interval Type RncPool Name. String Type Neighboring RNC protocol version. Enumeration Type
This parameter specifies the decrease Typealarm report threshold. Interval rate 20~99 20~99 This parameter specifies the cause of RRCType Enumeration connection establishment, that is, the value of the Establishment cause IE in the RRC CONNECTIO ORIGCONVCALLEST, ORIGSTREAMCALLEST, ORIGINTERCALLEST, ORIG ORIGCONVCALLEST, ORIGSTREAMCALLEST, OR The minimum number of RRC connection request Per Spu, the sum of RRC connection0~65534need to be higher than this threshold to arise KP Interval Type 0~65534 request Successful RRC connection ratio Per Type if the ratio is lower than this threshold in a checking period, need arise KPI alarm. Interval Spu, 0~100 0~100 Wait time in RRC connectionIntervalmessage, the time period the UE has to wait before 0~15 reject Type 0~15 repeating the rejected procedure of RRC connection. A timer used to wait for initial direct transmission. Interval Type 1~10000 1~10000 A timer used to wait for the Iu releaseType Interval command message in RRC procedure. 1~10000 1~10000 A timer used to wait for the response to paging type 1 in RRC procedure. Interval Type 1~10000 1~10000 A timer used to retransmit the RRC CONNECTION RELEASE message to UE. Interval Type 1~5000 1~5000
A timer used to wait for the acknowledgement of radio link control (RLC) completion in RRC procedure. Interval Type 1~3000 1~3000 A timer to RNC wait for the response Type Interval to security mode command from UE in security mode procedure. 1~10000 1~10000 A timer used to wait for RRCInterval Type connection setup complete message from UE in RRC procedure. 1~10000 1~10000 This field indicate whether the AAL2PATH is belong to resource group. Enumeration Type NO, YES NO, YES Number of the resource group that the AAL2PATH belongs to. Interval Type 0~119 0~119 Number of the resource group that the IP Path belongs to. 0~119 Interval Type 0~119 Indicating the resource management mode.Type Enumeration SHARE(Share), EXCLUSIVE(Exclusive) SHARE, EXCLUSIVE
This parameter specifies the resource management mode. If the SHARE mode is adopted, the logical port can be shared by multiple operators. I Enumeration Type SHARE, EXCLUSIVE SHARE, EXCLUSIVE This parameter specifies the reason to lockType Enumeration the CM controlCOMMISSIONING(Commissioning), UPGRADE(Upgrade), RESTORE(Restore) rights. COMMISSIONING,UPGRADE,RESTORE UNI: 5000~20000 NNI: 1200~20000 No-Response Timer. Interval Type 1200~20000 CN reset type. 1. ALL_NODES: resetting all CN nodes. 2. BY_CNID: resetting the CN nodes specified by [CN ID]. Enumeration Type ALL_NODES, BY_CNID ALL_NODES,BY_CNID ON is open this function and Enumeration Type OFF is not. OFF, ON OFF, ON The times of resending the reset message to CN after the response is not received upon the expiry of the timer. Interval Type 0~5 0~5 RNC Type to be reset. Enumeration Type ALL_RNC, SINGLE_RNC ALL_RNC,SINGLE_RNC Reserved parameter 1. Bit Field Type RSVDBIT1_BIT1, RSVDBIT1_BIT2, RSVDBIT1_BIT3, RSVDBIT1_BIT4, RSVD This parameter is set to 0 or 1 according to the related do Reserved parameter 1. Bit Field Type RSVDBIT1_BIT1, RSVDBIT1_BIT2, RSVDBIT1_BIT3, RSVDBIT1_BIT4, RSVD Each bit can be set ON or OFF Reserved parameter 1. Bit Field Type RSVDBIT1_BIT1, RSVDBIT1_BIT2, RSVDBIT1_BIT3, RSVDBIT1_BIT4, RSVD Each bit can be set ON or OFF This parameter specifies parameter 1 reserved for the future use.ON Enumeration Type OFF, ON,OFF
The algorithms with the above values represent are as follow: RsvdBit1: Control RTWP Anti-interfence algorithm RsvdBit2~RsvdBit16:Reser ved Switch If RsvdBit1 is selected, the corresponding algorithms will be enabled; otherwise, disabled. Bit Field Type RsvdBit1(Reserved Switch 1), RsvdBit2(ReservedRsvdBit3, RsvdBit4, RsvdBit5, Sw RsvdBit1, RsvdBit2, Switch 2), RsvdBit3(Reserved Rs This parameter is saved for the coming usage. Interval Type 0~4294967295 0~4294967295 This parameter specifies parameter 10 reserved for the future use. Interval Type 0~4294967295 0 to 4294967295 This parameter is saved for the coming usage. Interval Type 0~4294967295 0~4294967295 This parameter is saved for the coming usage. Interval Type 0~4294967295 0~4294967295 This parameter is saved for the coming usage. Interval Type 0~4294967295 0~4294967295 This parameter is saved for the coming usage. Interval Type 0~4294967295 0~4294967295 This parameter is saved for the coming usage. Interval Type 0~4294967295 0~4294967295 This parameter is saved for the coming usage. Interval Type 0~4294967295 0~4294967295 This parameter is saved for the coming usage. Interval Type 0~4294967295 0~4294967295 Reserved parameter 2. Interval Type 0~4294967295 0~4294967295 Reserved parameter 2. Interval Type 0~4294967295 0~4294967295
This parameter specifies parameter 2 reserved for the future use.ON Enumeration Type OFF,
ON,OFF
Reserved parameter 2. Interval Type 0~4294967295 This parameter is saved for the coming usage. Interval Type 0~4294967295 This parameter specifies parameter 3 reserved for the future use.ON Enumeration Type OFF,
Reserved parameter 3. Interval Type 0~4294967295 0~4294967295 This parameter is saved for the coming usage. Interval Type 0~4294967295 0~4294967295 This parameter specifies parameter 4 reserved for the future use.ON Enumeration Type OFF, ON,OFF This parameter is saved for the coming usage. Interval Type 0~4294967295 0~4294967295 This parameter specifies parameter 5 reserved for the future use.ON Enumeration Type OFF, ON,OFF This parameter is saved for the coming usage. Interval Type 0~4294967295 0~4294967295 This parameter specifies parameter 6 reserved for the future use.ON Enumeration Type OFF, ON,OFF This parameter is saved for the coming usage. Interval Type 0~4294967295 0~4294967295 This parameter specifies parameter 7 Type Interval reserved for the future use. 0~4294967295 0 to 4294967295 This parameter is saved for the coming usage. Interval Type 0~4294967295 0~4294967295 This parameter specifies parameter 8 Type Interval reserved for the future use. 0~4294967295 0 to 4294967295 This parameter is saved for the coming usage. Interval Type 0~4294967295 0~4294967295 This parameter specifies parameter 9 Type Interval reserved for the future use. 0~4294967295 0 to 4294967295 This parameter is saved for the coming usage. Interval Type 0~4294967295 0~4294967295 This parameter specifies the revertive type Type MSP function. Enumeration of the NON-REVERTIVE, REVERTIVE NON-REVERTIVE, REVERTIVE
Different types of M3UA local entities must have different0~4294967295 Interval Type routing contexts. 0~4294967295 The rate of RTCP bandwidth Interval Type bandwidth. For 1~5 by the Iu CS example if this value is 1, it expresses that the allocated RTCP path bandwidth is 1% 1~5 Timer for state transition from CPC_HSPA to E_FACH of1~65535 services, used to detect whether a real-time service UE that adopts the CPC Interval Type real-time 1~65535 Timer for state transition from CPC_HSPA to FACH of real-time services, used to detect whether a real-time service UE that adopts the CPC te Interval Type 1~65535 1~65535 Whether to support RTCP function.It is valid only if the IuOFF, ON is CS domain and the transtype is IP. When RTCP switch is on, it takes stat Enumeration Type interface OFF,ON This parameter specifies the destination IP address. IP Address Type 0.0.0.0 to 255.255.255.255 This parameter specifies the mask of the Type IP Address destination address. 0.0.0.0 to 255.255.255.255 Timer for state transition from DCH or HSPA to E_FACH1~65535 Interval Type of real-time services, used to1~65535 detect whether a real-time service UE in CELL_DCH s Timer for state transition from DCH or HSDPA to FACH of real-time services, used to check whether the UE in the CELL_DCH state with real Interval Type 1~65535 1~65535 Pending time after the traffic Enumeration Type reported.D250,parameter is used to prevent 500,many traffic volume8000, 16000 volume event 4B is This D500, D1000, D2000, 250, too D8000, 2000, 4000, events 4B being reported. D4000, 1000, D16000
This parameter is used to check whether the UE in the lowD8, D16, D32,If the UE is on8, 16,D512, D1024, D2k,the 1024, 2k, 3k, 4k, 6k,increas Enumeration Type activity state. D64, D128, D256, 32,HSPA channel, D3k, D4k, D6k, D8k, D12k,12 DCH or 64, 128, 256, 512, low activity counter 8k, D When the traffic volume is below the 4B threshold and remains so for the D40, D60, D80, 10, thisD120, D160, D200, D240,200, 240, 320,D128 Enumeration Type D0, D10, D20, period specified D100, 40, 60, 80, 100,event 4B is D320, D640, 640, 0, by 20, parameter, the 120, 160, reported. This para
This parameter specifies the threshold of the traffic volume of 4A event forD128, D256,16, 32, 64, 128, D2k, 512, 1024, 2k, 3k, 4k, 6k, 8k,D16k Enumeration Type D16, D32, D64, triggering the transition of real-time servicesD6k, D8k, D12k, 12k, D512, D1024, 256, D3k, D4k, from E_FACH to HSP This parameter specifies the occurrence time of 4A event for triggering the transitionD80, 10, 20, D120, D160, D200, D240,200, 240, 320,D128 Enumeration Type D0, D10, D20, D40, D60, of0, D100, 40, 60, 80, 100, 120, 160, HSPA D640, 640, real-time services from E_FACH to D320, with CPC te
This parameter specifies the threshold of the traffic volume of 4A event forD128, D256,16, 32, 64, 128, D2k, 512, 1024, 2k, 3k, 4k, 6k, 8k,D16k Enumeration Type D16, D32, D64, triggering the transition of real-time servicesD6k, D8k, D12k, 12k, D512, D1024, 256, D3k, D4k, from E_FACH to DCH This parameter specifies the occurrence time of 4A event for triggering the transitionD80, 10, 20, D120, D160, D200, D240,200, 240,HSPA. Th Enumeration Type D0, D10, D20, D40, D60, of0, D100, 40, 60, 80, 100, 120, 160, DCH or 320,D128 real-time services from E_FACH to D320, D640, 640,
This parameter specifies the threshold of the traffic volume of 4A event forD128, D256,16, 32, 64, 128, D2k, 512, 1024, 2k, 3k, 4k, 6k, 8k,D16kw Enumeration Type D16, D32, D64, triggering the transition of real-time servicesD6k, D8k, D12k, 12k, D512, D1024, 256, D3k, D4k, from FACH to HSPA This parameter specifies the occurrence time of 4A event for triggering the transitionD80, 10, 20, D120, D160, D200, D240,200, with CPCD128 Enumeration Type D0, D10, D20, D40, D60, of0, D100, 40, 60, 80, 100, 120, 160, D320, D640, 640, real-time services from FACH to HSPA 240, 320, techn
This parameter specifies the threshold of the traffic volume of 4A event forD128, D256,16, 32, 64, 128, D2k, 512, 1024, 2k, 3k, 4k, 6k, 8k,D16k Enumeration Type D16, D32, D64, triggering the transition of real-time servicesD6k, D8k, D12k, 12k, D512, D1024, 256, D3k, D4k, from FACH to DCH or This parameter specifies the occurrence time of 4A event for triggering the transitionD80, 10, 20, D120, D160, D200, D240,200, 240, 320,This p Enumeration Type D0, D10, D20, D40, D60, of0, D100, 40, 60, 80, 100, 120, 160, D320,HSPA. D128 real-time services from FACH to DCH or D640, 640, It is used to calculate the round-trip time of the protocol stack and the RTO value. The [RTO alpha value] must be less than the [RTO beta value Interval Type 0~100 0~100 It is used to calculate the round-trip time of the protocol stack and the RTO value. The [RTO beta value] must be greater than the [RTO alpha v Interval Type 0~100 0~100 When [RTO max value] and [RTO max value] are constants, the larger this parameter is set, the longer the time spent in checking if the link wo Interval Type 1000~60000 1000~60000 When [RTO max value] is a constant,Type Interval the larger this parameter is set, the longer the time spent in checking if the link works well. 1000~60000 1000~60000 When [RTO max value] is a constant,Type Interval the larger this parameter is set, the longer the time spent in checking if the link works well. 1000~60000 1000~60000 Route index, a logical number of the route. Interval Type 0~4294967295 0~4294967295
This parameter specifies the rate up step of the logical port. Interval Type 0~1000 0~1000 This parameter specifies the period ofType Interval adjusting the rate up1~100 step. 100~10000 This parameter specifies the backward bandwidth of the logical port. Interval Type 10~2810 530~148930 Backward bandwidth of the IP path. Type Interval 1~3000000 1~3000000 This parameter is valid only when Transport Resource Group Type is ATM or Transport Resource Group Type is IP and Bandwidth Mode is FU Interval Type 0~4000000 0~4000000
100~1999
100~1999
When the time difference between the time when the UE receives a physical frame from the downlink and the time when the UE transmits the physical frame to the uplink becomes greater than a certain threshold, the event 6F will be triggered. This parameter is to optimize the power control performance within a time slot, that is, to guarantee that the power control within a time slot is implemented based on all links in the active set. The ideal UE Rx-Tx time difference should be 1024 chips. This parameter should not be too close to 1024. Otherwise, the radio link may be removed prematurely. It is recommended that the parameter be set within the range 1024~1280. For the definition and its related details, refer to the 3GPP TS 25.331 protocol.
Interval Type
768~1280
768~1280
When the time difference between the time when the UE receives a physical frame from768~1280 Interval Type 768~1280 the downlink and the time when the UE transmits the p No. of the SAAL link that bears the CCP.For detailed information of this parameter, refer to 3GPP TS 25.430. Interval Type 0~699 0~699 No. of the SAAL link.For detailed information of this parameter, refer to 3GPP TS 25.430. Interval Type 0~699 0~699
This parameter specifies the number of an SAAL link carried on the VCL. Interval Type 0~699
0 to 699
Number of the SAAL link bearing theType signaling to the adjacent node. Interval AAL2 0~699 0~699 Interface type of the SAAL link.The interface type of linksUNI, NNI UNI. The interfaceUNI, of links on Iu and Iur is NNI. Enumeration Type on Iub is type NNI SAAL link connection timer. Interval Type It is a protection timer waiting for a SAAL response after a link setup request is sent to SAAL. 35000~120000 35000~120000
PLMN-Id, LAC and SAC together compose the Service Area ID (SAI). The SAI is used to define an area composed of one or more cells in the s Interval Type 0~65535 0~65535 Indicating whether the Iub interface supports satellite transmission. Enumeration Type TRUE(True), FALSE(False) TRUE, FALSE Timing offset between the SCCPCH and PCCPCH in the cell. As defined by the 25.211 protocol, the PICH timing is 7680 chips prior to its corresponding SCCPCH frame timing. If the offset of the SCCPCH timing from the PCCPCH timing is smaller than 30 (x 256 chips), the corresponding CFN decreases by 1. Then, the difference between the PICH CFN and the corresponding SCCPCH CFN is 2. However, in the 25.435 protocol, the PI information and paging message are transmitted with two consecutive CFNs. In the RNC, the PI information and paging messages are also transmitted with two consecutive CFNs irrespective of the chip offset. Therefore, the two protocols conflict with each other in this aspect. To avoid the compatibility problem, it is recommended that the SCCPCH timing carrying the PCH transport Interval Type 0~149 0~38144,step:256 channel be set to between List Type. Enumeration Type ByRack, ByNodeBId, ByCellId ByRack,ByNodeBId,ByCellId
This parameter specifies the average rate. Physical unit: cell/s or kbit/s. Interval Type 30~70754 30 to 70754 Scrambling code of the SCCPCH. 0: primary scrambling code; 1~15: secondary scrambling code. Note: This parameter must be set to the prima Interval Type 0~15 0~15
This parameter specifies the state of the scramble switch. The setting of this parameter should be consistent with that at the peer end. Enumeration Type ON, OFF ON, OFF
Interval Type
0~599
0~599
This parameter specifies the start dateType DST. Interval of the 1~31 1 to 31 This parameter specifies whether the SD isType Enumeration enabled. DISABLE, ENABLE DISABLE, ENABLE This parameter specifies the priority of the Type Enumeration SF event and the SD event. HIGH, LOW HIGH, LOW Seed of the pseudo-random sequence Type Interval generator. It can prevent idle period of different NodeBs from overlapping. 0~63 0~63 This parameter specifies the type of the NodeB detect. Enumeration Type SINGLE(Single NodeB), ALL(ALL NodeB) SINGLE, ALL This parameter indicates whether the MBMS service is released first or user first service), USER_REL(UE) Enumeration Type MBMS_REL(MBMS when the overload occurs. MBMS_REL, USER_REL This parameter specifies the IP address to be accessed by the FTP client. IP Address Type 0.0.0.0~255.255.255.255 This parameter specifies the server name for CHAP authentication during PPP or MLPPPto 63 negotiation. String Type 0 link character
This parameter specifies the rate of the MBMS service carried on the D64, D128, D256 16, 32, 64, 128, 256 Enumeration Type D16, D32, common channel. For details of this parameter, refer to the 3GPP TS 25.34
This parameter specifies whether the service differential DRD algorithm will be applied. - ON: The service differential DRD algorithm will be applied.(If cell-level DRD parameters are configured, the status of cell level Service differential drd switch should also be considered.) - OFF: The service differential DRD algorithm will not be applied. Enumeration Type Uniquely identifying a MBMS service in the PLMN. Interval Type Indicating whether to supportEnumeration Type CS, PS or both domains.
ON, OFF ON, OFF 0~4294967295 0~4294967295 SUPPORT_CS, SUPPORT_PS, SUPPORT_CS_AND_PS SUPPORT_CS_AND_ SUPPORT_CS, SUPPORT_PS,
This parameter specifies the traffic class ofTypeMBMS service carried on the common channel. For details of this parameter, refer to the 3GPP T Enumeration the STREAMING, BACKGROUND STREAMING, BACKGROUND This parameter is valid only when Adjacent Node Type is IUPS.NO means the node is GGSN, and GGSN need not to configure dpx parameter. Enumeration Type NO, YES NO, YES
Numbers of incoming calls toInterval Type the load exceeds the forwarding threshold. When the CPU usage is between the sharing out thresh be shared when 0~255 0~255 This parameter specifies the sharing type of a NodeB. The DEDICATED(Dedicated), RANSHARING(RAN Sharing), belong to one operator. Th Enumeration Type value "DEDICATED" indicates that all cells of the NodeB MOCN(MOCN) Dedicated, RANSharing, MOCN Inter-system HCS cell reselection start threshold. When Srxlev of the serving cell is less-105~91, step:2 Interval Type -53~45 than this parameter, the UE starts the inter-system meas
This parameter specifies the handover attribute. If the SERVICE_HO_BASED_O N_RNC_SWITCH is on, the handover setting of this parameter is applied. Otherwise, the handover setting assigned by the CN is applied. HO_TO_GSM_SHOULD_ BE_PERFORM: Handover to the 2G network is performed so long as 2G signals are available. HO_TO_GSM_SHOULD_ NOT_BE_PERFORM: Handover to the 2G network is performed when 3G signals are weak but 2G signals are strong. HO_TO_GSM_SHALL_N OT_BE_PERFORM: Handover to the 2G network is not performed even if 3G signals are weak but 2G signals are strong.
Enumeration Type
This parameter specifies the threshold number of the soft handover failures. This parameter determines the reporting times of the events from the cell that fails to join the active set in soft handover, to trigger the rate reduction of the active set and the attempt to join the active set. The smaller the value of this parameter, the easier it is for the cell that fails to join the active set in the load based soft handover to join the active set through the soft handover rate reduction strategy, but the easier it is to trigger the rate reduction of the active set and thus to affect the use of services. Note that this parameter need be considered in combination with the rate reduction evaluation period, and the reporting intervals of event 1A and 1C. Otherwise, the reports cannot reach the required times to trigger rate reduction during the rate reduction evaluation period. Interval Type 0~63 0~63 This parameter specifies the maximum evaluation period of the soft handover failure. When the rate reduction evaluation is performed on a cell Interval Type 0~120 0~120
When the RNC receives events 1A, 1C and 1D, the target cell can be added to the active set only when CPICH Ec/No of the target cell is higher than this absolute threshold. The purpose for setting this parameter is as follows: The current events of soft handovers are defined on the basis of relative thresholds and have no requirement for the absolute quality. If the signal quality of added cells is too poor, the general quality of the active set cannot be obviously improved, but more downlink resources are occupied and more TPC errors are caused, and the soft handover performance is worsened. Therefore, there should be a baseline for the quality of the radio links to be added. As for the impact on network performance: Adjust this parameter according to the Ec/Io that the cell soft handover area reaches as expected at Interval Type network planning. The Indicating whether to trigger soft handover cross the Iur interface between the RNC and the neighboring RNC: 1) CS_SHO_SWITCH. Indicating whether to trigger hard handover for CS cross the Iur interface. 2) HSPA_SHO_SWITCH. Indicating whether to trigger hard handover for HSPA cross the Iur interface. 3) NON_HSPA_SHO_SWIT CH. Indicating whether to trigger hard handover for PS(R99) cross the Iur interface. Bit Field Type
-24~0
-24~0
Flag of whether to include this neighboring relationship in the System Information Block 11 (SIB11). This parameter indicates whether the neighboring cell information is delivered in SIB11. FALSE: not to include the neighboring information in the SIB11. TRUE: to include the neighboring information in the SIB11. Enumeration Type
Flag of whether to include this neighboring relationship in the System Information Block 12 (SIB12). This parameter indicates whether the neighboring cell information is delivered in SIB12. FALSE: not to include the neighboring information in the SIB12. TRUE: to include the neighboring information in the SIB12. Enumeration Type FALSE(Do not send), TRUE(Send) FALSE,TRUE Determine whether some system Field Type blocks are broadcast in this cell. If the corresponding system information block is selected, then se Bit information SIB2, SIB4, SIB12, SIB18, SIB11BIS SIB12, SIB18, SIB11BIS SIB2, SIB4,
This parameter specifies the channel type and bit rate for RRC connection establishment. - FACH: The RRC connection is set up on the common channel. DCH_3.4K_SIGNALLING : The RRC connection is set up on the 3.4 kbit/s dedicated channel. DCH_6.8K_SIGNALLING : The RRC connection is set up on the 6.8 kbit/s dedicated channel. DCH_13.6K_SIGNALLIN G: The RRC connection is set up on the 13.6 kbit/s dedicated channel. DCH_27.2K_SIGNALLIN G: The RRC connection is Enumeration Type set up on the 27.2 kbit/s
Index of the signalling link set. Interval Type M3UA link code in SPU subsystem. Type Interval Indicating whether the FACH bears signalling. Enumeration Type Signalling link code. Interval Type
Maximum rate of the wideband AMR speech service for silver users. Enumeration Type WBAMR_BITRATE_6.60K,6.60, 8.85, 12.65, 14.25, 15.85,WBAMR_BITRATE_12 WBAMR_BITRATE_8.85K, 18.25, 19.85, 23.05, 23.8
Maximum rate of the narrowband AMR speech service forNBAMR_BITRATE_4.75K, 4.75, 5.15, 5.90, 6.70, 7.40, 7.95, 10.20, 12.20 Enumeration Type silver users. NBAMR_BITRATE_5.15K, NBAMR_BITRATE_5.90 This parameter specifies the DL maximumType of signal for PS domain user. Enumeration bit rate D3.4, D13.6, D27.2 D3.4, D13.6, D27.2 This parameter specifies the UL maximumType of signal for PS domain user. Enumeration bit rate D3.4, D13.6, D27.2 D3.4, D13.6, D27.2 This parameter specifies the source IP address. IP Address Type 0.0.0.0~255.255.255.255 IMS SRB service downlink factor. Type Interval 0~100 0~100
IMS SRB primary path. Enumeration Type IMS Signal bearing primary path loadType Interval threshold.
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF 0~100 0~100
IMS SRB secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF IMS Signal primary secondary path load ratio threshold. 0~100 Interval Type 0~100 IMS SRB service uplink factor. Interval Type 0~100 0~100 The UE does not start the inter-RAT measurement if it detects that the quality of the serving cellstep:2 Interval Type -16~10 -32~20, is higher than this threshold. For detailed inform This parameter defines the slot format used by the SCCPCH. The configuration D5, D6,0, 1, 2, 3, D9, D10, D11, 10, 11, 12, D14, D15, D16, D17 Enumeration Type D0, D1, D2, D3, D4, of this parameter 4, relevant8, 9, D12, D13, 13, 14, 15, 16,of the D7, D8, is 5, 6, 7, to the SF, pilot bit, and TFCI 17 Sequence number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Interval Type 0~3 0~3 Sequence number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Interval Type 0~3 0~3 Sequence number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Interval Type 0~3 0~3
Sequence number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Interval Type 0~3 0~3 Number of available PRACHEnumeration Type slot formats. For detailed informationD3, this parameter, refer to 3GPP D4 25.211. D1, D2, of D4 D1, D2, D3, TS The signalling route mask is used for sharing loads between signalling routes. Suppose that the number B0010, B0011, B0100, B0101,as n. Then Enumeration Type B0000, B0001, B0010, B0011, B0100, B0101, B0110, B0111, is expressed B0110, B B0000, B0001, of 1s in the value B1000, B1001, B1010 This parameter specifies the type of the start date. DATE indicates that the DST starts from a certain day. WEEK indicates that the DST starts fr Enumeration Type DATE(Input with date), WEEK(Input with week), DATEWEEK(Input with date and DATE, WEEK, DATEWEEK Method of positioning the UE. Field Type Bit CELLID_CENTER, CELLID_RTT, OTDOA, AGPS A-GPS, OTDOA, CELLID_RTT, CELLID_CENTER This parameter specifies whether the alarmType Enumeration reporting for smoke is enabled. OPEN(Open) CLOSE(Close), CLOSE,OPEN This parameter specifies the start month ofType Enumeration the DST. JAN(January), FEB(February), MAR(March), APR(April), MAY(May),AUG, SEP, O JAN, FEB, MAR, APR, MAY, JUN, JUL, JUN(June),
RSPU slot No. Interval Type 0,2,4,8,10 {0},{2},{4},{8},{10} The Slot No. Interval Type 0,2,4,8,10 0,2,4,8,10 This parameter specifies the number of the slot where the SPU is located. Interval Type 0,2,4,6,8,10 0~10, step: 2 The Slot No. Interval Type 0,2,4,8,10 0,2,4,8,10 This parameter specifies the number of a slot. Interval Type 0,2,4,6,8,10,12,14,16,18,20,22,24,266, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26 0, 2, 4, This parameter specifies the number of the slot where the SPUa is located. Interval Type 0,2,4,8,10 0, 2, 4, 8, 10 This parameter specifies the number of a slot. Interval Type 0~27 0 to 27 This parameter specifies the number of a slot. Interval Type 14~27 14 to 27 This parameter specifies the number of a slot. Interval Type 14~27 14 to 27
This parameter specifies the number of a slot where the board is located. Interval Type 0~27 This parameter specifies the number of a slot. Interval Type 14~27 This parameter specifies the number of a slot. Interval Type 14~27
0 to 27 14 to 27 14 to 27
14,16,18,20,22,24,26
14,16,18,20,22,24,26
0~5,8~27
0 to 5,8 to 27
This parameter specifies the number of a slot. For the logical uninhibition, the value range of "Slot 27 is {{0},{2},{4},{8~27}}. For the physi Interval Type 0~5,8~27 0 to 5, 8 to No."
14~27
14 to 27
This parameter specifies the number of a slot. Interval Type 14~27 14 to 27 This parameter indicates the number of the slot where the board is located. The board refers to the one on which the command is executed. Interval Type 29,31 29,31 This parameter specifies the slot that holds the SPUa. Interval Type 0,2,4,8,10 0, 2, 4, 8, 10 Number of the SPU slot where the SAAL link is terminated. Interval Type 0,2,4,8,10 0, 2, 4, 8, 10 This parameter is valid only when Adjacent Node Type is UNI_AAL2SWITCH.Slot number4, 8, 10SAAL link bearing the AAL2 signaling to th Interval Type 0,2,4,8,10 0, 2, of the Number of the slot where the Interval Type terminated. SCTP link is 0,2,4,8,10 0, 2, 4, 8, 10 Number of the slot where the Interval Type SPU controlling the M3UA link is located. 0,2,4,8,10 0,2,4,8,10 Slot Number of PHB map to DSCP. Type Interval 14~27 14~27 Number of the slot where the Interval Type controlling the MTP3-B link is located. 0,2,4,8,10 SPU subsystem 0,2,4,8,10
Sharing Network Area Code. Interval Type Indicating whether the SNAC need be configured. TRUE: The SNAC need be configured. FALSE: The SNAC need not be configured.UE can access any cell of the PLMN. Enumeration Type
0~65535
0~65535
TRUE, FALSE
TRUE,FALSE
When it is set to ON, the RNC sends UMTS cell load information to the GSM during the non-coverage based system relocation in or out proces Enumeration Type OFF, ON OFF, ON BIT14: 1~16383 BIT16: 1~65535 The OSP should be input in hexadecimal format and cannot be 0. In addition, it should BIT24: 1~16777215 network and cannot be repeated. Interval Type 1~16777215 be allocated in the SS7 Indicating the number of bits Enumeration Type of the OSP code. BIT14 means 14-bit code,BIT16 means 16-bit code,and BIT24 represents 24-bit code. BIT14, BIT16, BIT24 BIT14, BIT16, BIT24 The OSP should be input in divided Type format. In addition, it should be allocated in the SS7 network and cannot be repeated. String number 1~11 characters Indicating whether the UE speed estimation is allowed in this cell. Value ON indicates that the UE speed estimation is allowed in this cell. Value OFF indicates that the UE speed estimation is not allowed in this cell. The UE speed estimation cannot be triggered even if this switch is enabled in either of the following cases: -The cell is not configured as a HCS cell by ADD CELLHCS or MOD CELLHCS. -The algorithm switch for the RNC-oriented UE speed estimation is not enabled by SET CORRMALGOSWITCH. Enumeration Type
ON, OFF
ON,OFF
Signal point data format. Enumeration Type WNF, DNF WNF, DNF This parameter specifies the transmission rate over the FE 10M, 100M Enumeration Type port. 10M, 100M For a high-mobility UE, multiples this parameter by its reselection delay to reduce the reselection delay of the UE. This parameter can be set to 1 Interval Type 0~10,255 {0~1},{255}, step:0.1
This parameter identifies a group of cells that have specific capabilities for four service 1~8 R99 real-time services, R99 non-real-time service Interval Type 1~8 types:
This parameter indicates the scheduling priority. The value 15 indicates the highest priority and the value 0 indicates the lowest. Interval Type 0~15 0~15 This parameter specifies the number of the source port of the IP loopback test. Interval Type 1024~3584 1024 to 3584
It is used to decide whether the cell load level is "Heavy" or not. It is denoted by the ratio of NodeB TX power to the maximum TX power. If the load of a cell is equal to or higher than this threshold, the load level of this cell is heavy. If the load level of a cell is heavy, the PUC algorithm will configure selection/reselection parameters for this cell to lead the UE camping on this cell to reselect another inter-frequency neighboring cell with light load. Interval Type 0~100 0~1, step:0.01
Hysteresis used to determine Interval load level. It is denoted by the ratio of NodeB TX power to the maximum TX power. It is used to avoid the the cell Type 0~100 0~1, step:0.01 It is used to decide whether the cell load level is "Light" or not. It is denoted by the ratio of NodeB TX power to the maximum TX power. If the load of a cell is equal to or lower than this threshold, the load level of this cell is light. If the load level of a cell is light, the PUC algorithm will configure selection/reselection parameters for this cell to lead the UE to reselect this cell rather than the previous inter-frequency neighboring cell with heavy load. Interval Type 0~100 0~1, step:0.01 The threshold used by SPU process system. When the equivalent user number of this SPU system is over this threshold, latter calls will be trans Interval Type 40~100 40~100
This parameter specifies the channel type of SRB. - DCH: Both uplink and downlink are preferably carried on DCH. - HSDPA: Uplink is preferably carried on DCH, and downlink is preferably carried on HS-DSCH. - HSPA: Uplink is preferably carried on EDCH, and downlink is preferably carried on HSDSCH. Enumeration Type This parameter specifies whether [SRB channel type] is valid in the RRC connection setup procedure. - TRUE: [SRB channel type] is valid in the RRC connection setup procedure and other procedures. - FALSE: [SRB channel type] is invalid in the RRC connection setup procedure but valid in other procedures.
Enumeration Type TRUE, FALSE FALSE, TRUE SRB service downlink factor.Interval Type 0~100 0~100 The MAC-c on Iub interface Interval Typeafter the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_F will increase 1~1000 1~1000 The MAC-c on Iub interface Interval Typeafter the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_F will increase 1~2000 1~2000
SRB primary path. Enumeration Type Signal bearing primary path load threshold. Interval Type
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF 0~100 0~100
SRB secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF Signal primary secondary path load ratio threshold. Interval Type 0~100 0~100 SRB service uplink factor. Interval Type 0~100 0~100 This parameter specifies the source end of timeslot cross connection, corresponding to theto 31 Interval Type 0~31 0 electrical port of the board. This parameter specifies the priority level of the clock source. Interval Type 1~4 1 to 4 This parameter specifies the type of the clock source. Interval Type 0~4 0 to 4
This parameter specifies the source IP address of the flow.IP Address Type
0.0.0.0~255.255.255.255
This parameter specifies the ID of a local MEP. Interval Type 1~100 1 to 100 This parameter specifies the type of the clock source. Enumeration Type BITS1-2MHZ, BITS2-2MHZ, BITS1-2MBPS, BITS2-2MBPS, GPS, 8KHZ,BITS2-2 BITS1-2MHZ, BITS2-2MHZ, BITS1-2MBPS, LINE1_ This parameter specifies the number of theType end of timeslot cross connection. Enumeration source TS1(Time_slot_1), TS2(Time_slot_2), TS3(Time_slot_3), TS4(Time_slot_4),TS10, T TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS5(T Timer REPEAT_SREC.Frequency at Type ER is allowed45~90received. If the second 45~90 Interval which to be ER message is received before the timer expires, the link
0~5
0~5
This parameter specifies the number of the RBS or RSS. 0~5 Interval Type This parameter specifies the number of a subrack. Interval Type 1~5
0 to 5 1 to 5
This parameter specifies the number of a subrack. Interval Type 0~5 0 to 5 This parameter specifies the number of the RBS subrack. 1~5 Interval Type 1 to 5 This parameter specifies the number of a subrack. Interval Type 0~5 0 to 5 Number of the subrack whereInterval Type is terminated. the SAAL link 0~5 0~5 This parameter is valid only when Adjacent Node Type is UNI_AAL2SWITCH.Subrack number of the SAAL link bearing the AAL2 signaling Interval Type 0~5 0~5 Number of the subrack whereInterval Type is terminated.0~5 the SCTP link 0~5 Number of the subrack. Interval Type 0~5 0~5 Number of the SUBRACK where the Type controlling the M3UA link is located. Interval SPU 0~5 0~5 No. of the WRBS at which the PHB map to DSCP. Interval Type 0~5 0~5 Number of the subrack whereInterval Type the SPU subsystem controlling the MTP3-B link is located. 0~5 0~5 This parameter specifies the name of a WRBS. String Type None When the parameter is set to YES, QoS control for DL BENO, YESis based on the TCPNO, YES retransmission. When the parameter is set to N Enumeration Type services and RLC SRNS relocation-allowed traffic type. ThisType Enumeration parameter determines the bearing policy over the realinterface. If the parameter is set to RT, only the RT(Real time service), NRT(Non Iur time service), ALL(All service) RT,NRT,ALL
When [Measurement transfer delay by FP Node synchronization between SRNC and DRNC ]+[Estimated nonmeasurement delay offset] > [transfer delay provided by the Qos of the current traffic], the relocation will be triggered. The value of this parameter should be set according to the time delay concerned requirements of the most common services over the Iur interface. If the value is too small, unnecessary relocation will occur; if the value is too large, the QoS of the services over the Iur interface will be affected. The transfer delay provided by the Qos of the current traffic is the parameter set at the CN and is notified to the RNC through an RAB ASSIGNMENT REQUEST message.
Interval Type 0~400 0~400 SRNS relocation expiry time.Interval Type In order to avoid ping-pong relocation, the user, if successfully relocated, is not allowed to relocate again in the sp 1~255 1~255 Time interval between two SRNS relocations based on Iur 1~100 optimization. For each time interval, the RNC specifies several UEs to perfo Interval Type resource 1~100 If SRNSR_DSCR_SEPRAT_DUR_SWITCH of [SrnsrSwitch] in SET CORRMALGOSWITCH is on, after the separation of the SRNC and the Interval Type 1~255 1~255
SRNSR algorithm switch. 1) SRNSR_DSCR_IUR_RES RCE_SWITCH: When the switch is on, relocation for transmission optimization over the Iur interface is allowed. When there is congestion over the Iur interface, the UE may be selected to initiate relocation or DSCR if the UE has only a radio link over the Iur interface and the link have the same attributes as the congested link. Based on DSCRInd of ADD NRNC, the RNC decides whether to initiate relocation or DSCR. When the RRC CONN REL message with the cause value "Directed Signalling Connection reestablishment" is sent to the UE, the UE initiates RRC reestablishment and updates the routing area once immediately. 2) SRNSR_DSCR_LOC_SEP RAT_SWITCH: When the switch is on, the RNC Bit Field Type SRNSR_DSCR_IUR_RESRCE_SWITCH, SRNSR_DSCR_LOC_SEPRAT_SWITC SRNSR_DSCR_IUR_RESRCE_SWITCH, SRNSR_DS initiates static relocation or Relocation trigger time after IURCCH. The relocation occurs after timeout. This parameter determines the probability of the relocation of the Iu Interval Type 1~65535 1~65535 UE SRNTI. Interval Type 0~1048575 0~1048575 This parameter specifies the type of the subrack. Enumeration Type RSS, RBS RSS, RBS Offset of the SSCH transmit power from the PCPICH transmit power in a cell. If the value is excessively low, UEs at the edge of cells fail in ne Interval Type -350~150 -35~15, step: 0.1 This parameter specifies the threshold for clearing an alarm related to the CPU usage. When the CPU usage is lower than the value of this param Interval Type 20~99 20 to 99 This parameter specifies the threshold for reporting an alarm related to the CPU usage. When100 CPU usage is higher than the value of this par Interval Type 30~100 30 to the This parameter specifies the type of source. - SPEECH: speech service - UNKNOWN: non-speech service Enumeration Type SPEECH, UNKNOWN SPEECH, UNKNOWN
This parameter specifies the threshold for clearing an alarm related to the DSP usage. When the DSP usage is lower than the value of this param Interval Type 20~99 20 to 99
This parameter specifies the threshold for reporting an alarm related to the DSP usage. When 100 DSP usage is higher than the value of this para Interval Type 30~100 30 to the Intra-system HCS cell reselection start threshold. When Srxlev of the serving cell is less-105~91, step:2 Interval Type -53~45 than this parameter, the UE starts the intra-frequency an Threshold for inter-RAT cell Interval Type reselection. When the quality-16~10,127 (CPICH Ec/No measured by{-32~20},{127},step:2 is lower than this threshold plus UE) of the serving cell
This parameter specifies the subsystem No. of the SPU/MPU board. Interval Type 0~3
0 to 3
No. of the subsystem to set. Interval Type This parameter specifies the start time ofType Compound the DST.
0~3 HOUR(hour),MIN(minute),SEC(second)
This parameter specifies the service type. CBR and RTVBR are realtime traffic and are UBR, CBR, RTVBR, NRTVBR, UBR_PLUS Iub, or Iu Enumeration Type UBR, CBR, RTVBR, NRTVBR, UBR_PLUS the control plane on the Iur, usually carried on When a DCH is set up, the UE starts counting the number 1~512 CRCs within a specified sliding window. If the number of faulty CRCs exce Interval Type of faulty 1~512 When the parameter is set to INACTIVE, the timed GPS frame measurement is not activated. When the parameter is set to ACTIVE, the timed Enumeration Type INACTIVE, ACTIVE INACTIVE, ACTIVE Start time of the first interval Compound Type when the "Cell dynamic shutdown" feature is valid. HOUR, MIN 00:00~23:59 Start time of the second interval when the "Cell dynamic shutdown" feature is valid. 00:00~23:59 Compound Type HOUR, MIN Start time of the third intervalCompound"Cell dynamic shutdown" feature is valid. when the Type HOUR, MIN 00:00~23:59 CN protection timer. Interval Type 1000~300000 1000~300000 Protection timer used in case Interval intermittent at the neighboring RNC. of DSP Type 1~300 1~300 Maximum length of the STAT PDU list. Interval Type 3~67 3~67 Indicating whether the signalling point canType Enumeration perform the signalling transmission function. OFF, ON OFF, ON This parameter specifies the mode used to Typethe CPU usage test. Enumeration stop MANULSTP(Manual stop), AUTOSTP(Automatic stop) MANULSTP, AUTOSTP This parameter specifies the DL maximumType of streaming forD16, D32, D64, D128, D144,D16, D32, D64, D128, D144, D256, D384 Enumeration bit rate D0, D8, PS domain user. D0, D8, D256, D384 The MAC-c on Iub interface Interval Typeafter the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_F will increase 1~1000 1~1000 This parameter specifies the rate threshold Type TTI on the E-DCH for HSUPA streaming service. When the cell capability and UE capability Enumeration of 2ms D8, D16, D32, D64, D128, D144, D256, D384, D608 8,16,32,64,128,144,256,384,608 The MAC-c on Iub interface Interval Typeafter the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_F will increase 1~2000 1~2000 This parameter specifies the UL maximumType of streaming forD16, D32, D64, D128, D144,D16, D32, D64, D128, D144, D256, D384 Enumeration bit rate D0, D8, PS domain user. D0, D8, D256, D384
This parameter indicates whether the SCCPCH uses STTD or not. FALSE Enumeration Type TRUE, For detailed information of this parameter, refer to 3GPP 25.346. TRUE, FALSE
This parameter indicates whether STTD TX diversity is supported. Enumeration Type STTD_Supported, STTD_not_Supported STTD_Supported, STTD_not_Supported
This parameter specifies the logical serial number of a subflow for the typical RAB. A bearer may use several subflows for transmission. For ex Interval Type 0~2 0~2 Max subframe length. Interval Type 16~1023 16~1023 This parameter specifies the subnet number of the internal 1~126,128~191 RNC. Interval Type IP address of the 1 to 126,128 to 191 Indicating whether the cell supports the CBS service. Enumeration Type TRUE, FALSE TRUE, FALSE This parameter specifies whether the NodeB allows settingFALSE, TRUE DPCH spreading factor to 512. If this parameter is set to TRUE, the Enumeration Type of the downlink FALSE, TRUE This parameter indicates whether to support the mode change of downlink power control (DPC). Enumeration Type FALSE, TRUE FALSE,TRUE This parameter specifies whether the NodeB supports setting of DPC MODE to TRIPLET. - If this parameter is set to TRUE, the NodeB supports setting of DPC MODE to TRIPLET. - If this parameter is set to FALSE, DPC MODE is always SINGLE. Enumeration Type FALSE, TRUE FALSE, TRUE Indicating whether to supportEnumeration IUR-CCH between the RNC and the neighboring YES establishing Type NO, YES NO, RNC. This parameter specifies the board is support backupclock NO(NO), YES(YES)clock. NO, YES Enumeration Type source of the output
CR supported by CN protocol version. Enumeration Type CR527_SUPPORT, CR527_NOT_SUPPORT, CR528_SUPPORT, CR528_NOT_SU CR527_SUPPORT, CR527_NOT_SUPPORT, CR528_ Identifying whether the inter-RAT cell supports PS HO. TRUE indicates that the inter-RAT cell is able to perform the handover procedure with Enumeration Type FALSE, TRUE FALSE,TRUE This parameter specifies whether the NodeB supports PS real-time services being carried on HSDPA. Enumeration Type FALSE, TRUE FALSE, TRUE Identifying whether the inter-RAT cell supports RIM. (RIM is usedTRUE the SI/PSIFALSE,TRUE the inter-RAT cell.) For the details of RI Enumeration Type FALSE, to obtain information of This parameter specifies whether to open or close the port.CLOSE(Close), OPEN(Open) Enumeration Type CLOSE,OPEN This parameter specifies the DST start dayTypeweek. Enumeration in a SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesday), THU(Thursday), SUN, MON, TUE, WED, THU, FRI, SAT This parameter specifies the state of the port switch. Enumeration Type Close, Open Close,Open This parameter specifies whether to turn on the BFD protocol switch. BFD_ON Enumeration Type BFD_OFF, BFD_OFF,BFD_ON Whether to support Switch3GPP25415CR0125 function.It OFF, ON Enumeration Type is valid only if the Iu interface is CS domain. OFF,ON This field indicate whether switch back if the primary IP address is available. Enumeration Type NO, YES NO, YES This field indicates the association will switch back to primary IP address after receiving appointed number of HBACK. Interval Type 1~254 1~254 Set patch switch parameter1. Enumeration Type OFF, ON OFF ON Set patch switch parameter10. Interval Type 0~429496729 0~429496729 Set patch switch parameter2. Enumeration Type OFF, ON OFF ON Set patch switch parameter3. Enumeration Type OFF, ON OFF ON Set patch switch parameter4. Enumeration Type OFF, ON OFF ON Set patch switch parameter5. Enumeration Type OFF, ON OFF ON Set patch switch parameter6. Enumeration Type OFF, ON OFF ON Set patch switch parameter7. Interval Type 0~429496729 0~429496729 Set patch switch parameter8. Interval Type 0~429496729 0~429496729 Set patch switch parameter9. Interval Type 0~429496729 0~429496729 This parameter specifies the DST start week in a month. FIRST(First), SECOND(Second), THIRD(Third), FOURTH(Fourth), LAST(Last) Enumeration Type FIRST, SECOND, THIRD, FOURTH, LAST When call shock control starts, the AMR_RRC number can be accessed per second for system. Interval Type 1~500 1~500 This parameter specifies the methodType String to contact the manufacturer. 1~250 character
This parameter specifies the system Type String description of the RNC production. 1~250 character When call shock control starts, the register and 3G->2G reselect number can be accessed per second for system. Interval Type 1~500 1~500 A timer to RNC wait for PS RESUME after successful CS1~255 Interval Type InterRAT handover. 1~255 This parameter specifies the location of the RNC product. String Type 1~250 character This parameter specifies the system Type the RNC product. String ID of 1~250 character When call shock control starts, it is the max number of RRC_REJ message. Interval Type 1~500 1~500 This parameter specifies the services provided by the RNC- product. String Type 1~250 character When the RRC REQ total number of one system reach this1~500 Interval Type threshold in period and can't1~500shared out to other SPU system, the RRC flow con been Signalling route set test timer. When the reception of a TFP causes unavailability of a route, this timer is started to regularly check whether the r Interval Type 30000~60000 30000~60000 Uninhibit acknowledgement timer. It is a protection timer waiting for an uninhibit acknowledgement message (LUA) from the peer end after an Interval Type 800~1500 800~1500 Force uninhibit timer. It is a protection timer waiting for a 800~1500 Interval Type force uninhibit acknowledgement message (LUA) from the peer end after a force unin 800~1500 Inhibition acknowledgement timer. It Type Interval is a protection timer waiting for an inhibition acknowledgement message (LIA) from the peer end after an 2000~3000 2000~3000 Link realignment timer. This Interval Type when a link fails to be started. The restart of the link is initiated after it expires. timer is started 800~1500 800~1500 Time-control changeover timer. When a normal changeover cannot be initiated, services will be changed over to an alternative link after this tim Interval Type 800~1200 800~1200 Local inhibit test timer. AfterInterval link is inhibited, this timer is started to regularly check the management states at both ends of the link. a local Type 180000~360000 180000~360000 Remote inhibit test timer. After a remote link is inhibited, this timer is started to regularly check the management states at both ends of the link. Interval Type 180000~360000 180000~360000 Changeover acknowledgement timer. Typea protection timer waiting for an extended changeover acknowledgement message (XCA) from the pe Interval It is 1400~2000 1400~2000 T300 is started when UE sends the RRC CONNECTION REQUEST message.D600, D800, when UED400, D600, RRC CONNECTION SETU Enumeration Type D100, D200, D400, It is stopped D1000, D1200, D1400, D1600, D1800, D2000, D3 D100, D200, receives the D800, D1000, D1200, D1400 T302 is started after the UE transmits the CELL UPDATE/URA UPDATE message and stopped after the UE receives the CELL UPDATE CO Enumeration Type D100, D200, D400, D600, D800, D1000, D1200, D600, D800, D1000, D1200, D1400 D100, D200, D400, D1400, D1600, D1800, D2000, D3 T304 is started after the UE sends the UE CAPABILITY INFORMATION message and stopped after the UE receives the UE CAPABILITY IN Enumeration Type D100, D200, D400, D1000, D2000 D200, D400, D1000, D2000 D100, T305 is started after the UE receives CELL UPDATE CONFIRM/URA UPDATE CONFIRM in CELL_FACH, URA_PCH or D360, D720 sta Enumeration Type INFINITY, D5, D10, D30, D60, D120, D360,D10, D30, D60, D120, CELL_PCH INFINITY, D5, D720 T307 is started after T305 has expired and Type detects "out D10, D15, area". D30,stoppedD10, D15, D20, D30,"in service area". The UE will Enumeration the UE D5, of service D20, It is D40, D50 the UE detects D40, D50 D5, after T308 is started after the UE transmits RRC CONNECTION RELEASE COMPLETE. This message will be sent upon the expiry of the Timer if Enumeration Type D40, D80, D160, D320 D40, D80, D160, D320 T309 is started after the UE is reselected to a cell belonging to another radio access system in connected mode, or the CELL CHANGE ORDER Interval Type 1~8 1~8
T312 is started after the UE starts to establish a DCH and stopped when the UE detects 1~15 Interval Type 1~15 consecutive N312 "in sync" indications from L1. It indic T313 is started after the UE detects consecutive N313 "out0~15 Interval Type of sync" indications from L1. T313 is stopped after the UE detects consecutive N315 1~15
T314 is started when the criteria for radio link failure are fulfilled and only radio bearers (RBs) associated with T314 exist.T314 is stopped after the Cell Update procedure has been completed. Protocol default value is 12. In case of the RL failure when the UE is in CELL_DCH state, If the RL cannot be successfully reconfigured by CELL UPDATE CONFIRM before the expiry of the corresponding T314 (or T315), CELL UPDATE will be resent for RL reconfiguration (this operation relates to T302 and N302). T314 should be set greater than T302*N302. In case of the expiry of T314, the corresponding service RBs will be removed.
Enumeration Type
D0, D2, D4, D6, D8, D12, D16, D20 D4, D6, D8, D12, D16, D20 D0, D2,
T315 is started when the criteria for radio link failure are fulfilled, and only the radio bearer associated with T315 exists.T315 is stopped after the Cell Update procedure has been completed. Protocol default value is 180. In case of the RL failure when the UE is in CELL_DCH state, T315 (or T314) is started and CELL UPDATE is sent. If the RL cannot be successfully reconfigured by CELL UPDATE CONFIRM before the expiry of the corresponding T315 (or T314), CELL UPDATE will be resent for RL reconfiguration (this operation relates to T302 and N302). T315 should be set greater than T302*N302. In case of the expiry of T315, the corresponding service RBs will be removed.
Enumeration Type D0, D10, D30, D60, D180, D600,D10, D30, D60, D180, D600, D1200, D1800 D0, D1200, D1800 T316 is started after the UE detects "out ofType area" inD0, D10, D20, D30, D40, D50, INFINITY D30, D40, D50, INFINITY service are Enumeration service URA_PCH or CELL_PCH state.T316D20, D0, D10, is stopped after the UE detects "in Periodical location update is implemented by MS through the location update procedure. 0: The step:6 Interval Type 0~255 0~1530 periodical update procedure is not used. This pa T381 is started after the RNCEnumeration Type CONNECTION SETUP"(or "CELL D0,D100, D200,D300,D400,D500, D600,D700,D800, D send message "RRC D0, D100, D200, D300, D400, D500, D600, D700, D800, D900, D1000, D1200, D15 UPDATE CONFIRM"). If T381 expire and RNC does Time-control changeback timer. When a normal changeback cannot be initiated, services will be changed back to a normal link only after this tim Interval Type 800~1200 800~1200 Changeover acknowledgement first attempt timer. It is a protection timer waiting for a changeback acknowledgement message (CBA) from the p Interval Type 800~1200 800~1200 Changeover acknowledgement second attempt timer. It is a protection timer waiting for 800~1200 Interval Type 800~1200 a changeback acknowledgement message from the peer Transmission prohibited inhibition timer. This timer is activated when a transmission prohibited message (TFP) is sent. The TFP will not be sen Interval Type 800~1200 800~1200 This parameter specifies the target number of the RLC retransmissions. In the link quality adjust algorithm0.1% Interval Type 1~1000 0.1%~100%, step: for E-FACH, When the measured ret
Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of Ec/No for CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGGER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Interfrequency measure report mode] is set to PERIODICAL_REPORTI NG, this parameter is used to evaluate inter-frequency handovers at the RNC. To set this parameter, you need to consider the following factors: The cell signal quality of the target frequency is better and can meet the coverage requirements of
Interval Type
-24~0
-24~0
Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of RSCP for CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGGER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Interfrequency measure report mode] is set to PERIODICAL_REPORTI NG, this parameter is used to evaluate inter-frequency handovers at the RNC. To set this parameter, you need to consider the following factors: The cell signal quality of the target frequency is better and can meet the coverage requirements of
Interval Type
-115~-25
-115~-25
Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of Ec/No for PS domain HSPA services. For HSPA services, if the value of [Inter-frequency measure report mode] is set to EVENT_TRIGGER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Interfrequency measure report mode] is set to PERIODICAL_REPORTI NG, this parameter is used to evaluate inter-frequency handovers at the RNC. To set this parameter, you need to consider the following factors: The cell signal quality of the target frequency is better and can meet the coverage requirements of Interval Type the current services.
-24~0
-24~0
Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of RSCP for PS domain HSPA services. For HSPA services, if the value of [Inter-frequency measure report mode] is set to EVENT_TRIGGER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Interfrequency measure report mode] is set to PERIODICAL_REPORTI NG, this parameter is used to evaluate inter-frequency handovers at the RNC. To set this parameter, you need to consider the following factors: The cell signal quality of the target frequency is better and can meet the coverage requirements of Interval Type the current services.
-115~-25
-115~-25
Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of Ec/No for PS domain nonHSPA services. For PS domain non-HSPA services, if the value of [Inter-frequency measure report mode] is set to EVENT_TRIGGER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Interfrequency measure report mode] is set to PERIODICAL_REPORTI NG, this parameter is used to evaluate inter-frequency handovers at the RNC. To set this parameter, you need to consider the following factors: The cell signal quality of the target frequency is better and can meet the coverage requirements of
Interval Type
-24~0
-24~0
Threshold of the target frequency for triggering inter-frequency measurement with measurement quantity of RSCP for PS domain nonHSPA services. For PS domain non-HSPA services, if the value of [Inter-frequency measure report mode] is set to EVENT_TRIGGER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Interfrequency measure report mode] is set to PERIODICAL_REPORTI NG, this parameter is used to evaluate inter-frequency handovers at the RNC. To set this parameter, you need to consider the following factors: The cell signal quality of the target frequency is better and can meet the coverage requirements of
Interval Type
-115~-25
-115~-25
Quality requirement for the inter-RAT cell during an inter-RAT handover with CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGGER, this parameter is used to set the measurement control of event 3A. One of the necessary conditions for triggering event 3A can be met only when the quality of the target frequency is higher than this threshold. The event 3A can be triggered only when the requirements of frequency quality threshold of relevant measurement quantity of the CS domain services are met; if the value of [Interfrequency measure report mode] is set to PERIODICAL_REPORTI NG, this parameter is used to evaluate inter-RAT coverage handovers at the RNC. Note that the value 0 means the physical value is smaller than -110 dBm. Interval Type If the periodical report
0~63
Quality requirement for the inter-RAT cell during an inter-RAT handover with HSDPA services. For PS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGGER, this parameter is used to set the measurement control of event 3A. One of the necessary conditions for triggering event 3A can be met only when the quality of the target frequency is higher than this threshold. The event 3A can be triggered only when the requirements of frequency quality threshold of relevant measurement quantity of the PS domain services are met; if the value of [Interfrequency measure report mode] is set to PERIODICAL_REPORTI NG, this parameter is used to evaluate inter-RAT coverage handovers at the RNC. Note that the value 0 means the physical value is smaller than -110 dBm. Interval Type If the periodical report
0~63
Quality requirement for the inter-RAT cell during an inter-RAT handover with PS domain non-HSDPA services. For PS domain non-HSDPA services, if the value of [Inter-frequency measure report mode] is set to EVENT_TRIGGER, this parameter is used to set the measurement control of event 3A. One of the necessary conditions for triggering event 3A can be met only when the quality of the target frequency is higher than this threshold. The event 3A can be triggered only when the requirements of frequency quality threshold of relevant measurement quantity of the PS domain services are met; if the value of [Interfrequency measure report mode] is set to PERIODICAL_REPORTI NG, this parameter is used to evaluate inter-RAT coverage handovers at the RNC. Note that the value 0 means the physical value is Interval Type smaller than -110 dBm.
0~63
This parameter specifies the segment number. Segment 1: basic device information Segment 2: connection information Segment 3: module information Segment 4: configuration information Segment 5: peer device information Segment 6: host version information Segment 7: cabinet information Segment 8: subrack information Segment 9: board and Flash electronic label information Segment 10: slot information Segment 11: port information Segment 12: antenna information
Interval Type 1~12 1~12 This parameter specifies the number of transport blocks in D0, D1, D2, D3, Operation mode. 2, 3, 4 Enumeration Type HS-SCCH Less D4 0, 1,
This parameter defines the number ofType Interval the transport blocks 0~512 corresponding to the TF 1, each transport block size is defined by RLCSize. The para 0~512
This parameter defines the number ofType Interval the transport blocks 0~512 corresponding to the TF 2, each transport block size is defined by RLCSize. For detai 0~512 This parameter defines the number ofType Interval the transport blocks 0~512 corresponding to the TF 3, each transport block size is defined by RLCSize. For detai 0~512
This parameter specifies the index of the size of a transport block transmitted in HS-SCCH Less Operation mode. The mapping between the index and the transport block size is as follows: 137~1 149~2 161~3 173~4 185~5 197~6 209~7 221~8 233~9 245~10 257~11 269~12 281~13 293~14 305~15 317~16 329~17 341~18 353~19 365~20 377~21 389~22 401~23 413~24 425~25 437~26 449~27 461~28 473~29 485~30 497~31 509~32 521~33 533~34 545~35 557~36 569~37 581~38 593~39 605~40 616~41 627~42 639~43 650~44 662~45 674~46 686~47 699~48 711~49 724~50 737~51 751~52 764~53 778~54 792~55 806~56 821~57 836~58 851~59 866~60 882~61 898~62 914~63 931~64 947~65 964~66 982~67 1000~68 1018~69 1036~70 1055~71 1074~72 1093~73 1113~74 1133~75 1154~76 1175~77 Enumeration Type 1196~78 1217~79 1239~80
D1, D2, D3, D4, D5, D6, D7,1, 2, 3, 4, D10, 7, 8, 9, 10, 11, 12, 13, D15, D16, D17, D1 D8, D9, 5, 6, D11, D12, D13, D14, 14, 15, 16, 17, 18,
This parameter specifies the index of the size of a transport block transmitted in HS-SCCH Less Operation mode. The mapping between the index and the transport block size is as follows: 137~1 149~2 161~3 173~4 185~5 197~6 209~7 221~8 233~9 245~10 257~11 269~12 281~13 293~14 305~15 317~16 329~17 341~18 353~19 365~20 377~21 389~22 401~23 413~24 425~25 437~26 449~27 461~28 473~29 485~30 497~31 509~32 521~33 533~34 545~35 557~36 569~37 581~38 593~39 605~40 616~41 627~42 639~43 650~44 662~45 674~46 686~47 699~48 711~49 724~50 737~51 751~52 764~53 778~54 792~55 806~56 821~57 836~58 851~59 866~60 882~61 898~62 914~63 931~64 947~65 964~66 982~67 1000~68 1018~69 1036~70 1055~71 1074~72 1093~73 1113~74 1133~75 1154~76 1175~77 Enumeration Type 1196~78 1217~79 1239~80
D1, D2, D3, D4, D5, D6, D7,1, 2, 3, 4, D10, 7, 8, 9, 10, 11, 12, 13, D15, D16, D17, D1 D8, D9, 5, 6, D11, D12, D13, D14, 14, 15, 16, 17, 18,
This parameter specifies the index of the size of a transport block transmitted in HS-SCCH Less Operation mode. The mapping between the index and the transport block size is as follows: 137~1 149~2 161~3 173~4 185~5 197~6 209~7 221~8 233~9 245~10 257~11 269~12 281~13 293~14 305~15 317~16 329~17 341~18 353~19 365~20 377~21 389~22 401~23 413~24 425~25 437~26 449~27 461~28 473~29 485~30 497~31 509~32 521~33 533~34 545~35 557~36 569~37 581~38 593~39 605~40 616~41 627~42 639~43 650~44 662~45 674~46 686~47 699~48 711~49 724~50 737~51 751~52 764~53 778~54 792~55 806~56 821~57 836~58 851~59 866~60 882~61 898~62 914~63 931~64 947~65 964~66 982~67 1000~68 1018~69 1036~70 1055~71 1074~72 1093~73 1113~74 1133~75 1154~76 1175~77 Enumeration Type 1196~78 1217~79 1239~80
D1, D2, D3, D4, D5, D6, D7,1, 2, 3, 4, D10, 7, 8, 9, 10, 11, 12, 13, D15, D16, D17, D1 D8, D9, 5, 6, D11, D12, D13, D14, 14, 15, 16, 17, 18,
This parameter specifies the index of the size of a transport block transmitted in HS-SCCH Less Operation mode. The mapping between the index and the transport block size is as follows: 137~1 149~2 161~3 173~4 185~5 197~6 209~7 221~8 233~9 245~10 257~11 269~12 281~13 293~14 305~15 317~16 329~17 341~18 353~19 365~20 377~21 389~22 401~23 413~24 425~25 437~26 449~27 461~28 473~29 485~30 497~31 509~32 521~33 533~34 545~35 557~36 569~37 581~38 593~39 605~40 616~41 627~42 639~43 650~44 662~45 674~46 686~47 699~48 711~49 724~50 737~51 751~52 764~53 778~54 792~55 806~56 821~57 836~58 851~59 866~60 882~61 898~62 914~63 931~64 947~65 964~66 982~67 1000~68 1018~69 1036~70 1055~71 1074~72 1093~73 1113~74 1133~75 1154~76 1175~77 Enumeration Type D1, D2, D3, D4, D5, D6, D7,1, 2, 3, 4, D10, 7, 8, 9, 10, 11, 12, 13, D15, D16, D17, D1 D8, D9, 5, 6, D11, D12, D13, D14, 14, 15, 16, 17, 18, 1196~78 1217~79 1239~80 Used for the MTP3-B to test Interval Type is successful, the tested link can be used to bear signalling. If failed, the MTP3-B periodically sen a link. If the test 1~254 1~254
Difference between the System Frame Number (SFN) and CHIP0, Frame Number (BFN) of the NodeB which the cellCHIP768, CHIP1024, CHI Enumeration Type NodeB CHIP256, CHIP512, CHIP0, CHIP256, CHIP512, belongs to. It is recommen CHIP768, CHIP1024, CHIP1280, CHIP1536, CHIP179 Uniquely identifying a cell. Interval Type 0~65535 0~65535 Length of the test code transmitted byType Interval the signalling link. 1~15 1~15 Maximum duration of cell reselection. This parameter, along with the [Max number of cell D60(60 seconds), D120(120240 Enumeration Type NOT_USED, D30(30 seconds), reselection], is60, 120, 180, evaluationD180(180 sec NOT_USED, 30, used for rate seconds), in HCS. For d Time before reverting to low-mobility measurement. For detailed information of this parameter, refer to 3GPP TS40, 50, 60, 70 D40(40 seconds) Enumeration Type NOT_USED, D10(10 seconds), D20(20 seconds), D30(30 seconds), NOT_USED, 10, 20, 30, 25.304. Hysterisis time before non-HCS resuming slow movement.NotUsed, D10(10 seconds), movement, 10,the number of cell reselections seconds), D5 Enumeration Type When UE is in high-speed D20(20 seconds), D30(3050, 60, 70 D40(40 is less than N NotUsed, if 20, 30, 40, seconds), Maximum duration of non-HCS cell reselection. If the number of cell reselection exceed the value30, thisD120(120240 Enumeration Type NotUsed, D30(30 seconds), D60(60 seconds), 120, 180, seconds), D180(180 seconds NotUsed, of 60, parameter during Tcrmaxnonhcs, the U
Cycle timer for deciding whether the UE is in lowmobility state. This timer provides the time for the RNC to decide whether the UE is in lowmobility state. The smaller the value is, the more frequently the state estimation is triggered. If the parameter is set to 0, it is an indication that the state estimation is not triggered. Interval Type 0~255 0~255 This parameter specifies whether the alarmType Enumeration reporting for temperature is enabled. CLOSE(Close), OPEN(Open) CLOSE,OPEN This parameter specifies the upper threshold for temperature alarm. String Type 1~9 character This parameter specifies the lower threshold for temperature alarm. String Type 1~9 character Offset of HCS cell CPICH RSCP measurement value in cell selection or reselection. The larger the value of the parameter, the lower the probability of selecting neighboring cells. The smaller the value of the parameter, the higher the probability of doing so. Enumeration Type Offset of cell CPICH Ec/No measurement value in cell selection or reselection. The larger the value of the parameter, the lower the probability of selecting neighboring cells. The smaller the value the parameter, the higher the Enumeration Type probability of doing so.
This parameter is valid when Interval Type the corresponding parameter 1~6000 to the reporting period unit for the event E of AMR service is set to TEN_MS related 10~60000, step: 10
This parameter is valid when Interval Type the corresponding parameter 1~6000 to the reporting period unit for the event E of BE service is set to TEN_MSEC related 10~60000, step: 10
This parameter is valid when Interval Type the corresponding parameter 1~6000 to the reporting period unit for the event F of BE service is set to TEN_MSEC related 10~60000, step: 10
DL basic common measurement report cycle. For detailed 1~6000 Interval Type information of this parameter, refer to 3GPP TS 25.433. 10~60000, step:10
Measurement report period of event EType Interval triggered by DL OLC. For detailed information of this parameter, refer to 3GPP TS 25.433. 1~6000 10~60000, step:10
This parameter specifies the HSDPA Type measurement1~6000period. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval bit rate report 10~60000, step:10
HSDPA power requirement measurement report period For detailed information of this 10~60000, refer to 3GPP TS 25.433. Interval Type 1~6000 parameter, step:10 This parameter specifies the HSUPA Type measurement1~6000period. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval bit rate report 10~60000, step:10
Value range: 1~6000 Physical value range: 10 to 60000, step: 10 Physical unit: ms Content: UL basic common measurement report cycle. For detailed information of this parameter, refer to 3GPP TS 25.433. Recommended value: 20
Interval Type
1~6000
10~60000, step:10
Measurement report period of event EType Interval triggered by UL OLC. For detailed information of this parameter, refer to 3GPP TS 25.433. 1~6000 10~60000, step:10
This parameter is valid when Interval Type the corresponding parameter 1~6000 to the reporting period unit for the event E of VP service is set to TEN_MSEC related 10~60000, step: 10 Time window for estimating whether the UE is in high-mobility state. The start point of the estimation is the moment of the last reporting of event 1D, and the backdated time length is determined by this parameter. If the parameter is set to 0, the RNC does not decide whether the UE is in high-mobility state.
Interval Type
0~511
0~511
This parameter indicates whether the SCCPCH involves the TFCI. When the downlink blind transport format detection function is used, the TFCI is unavailable. For detailed information of this parameter, refer to 3GPP TS 25.433. Note: This parameter is configured only for the SCCPCH in the formats 8 to 17. Enumeration Type
EXISTS, NOT_EXISTS
EXISTS, NOT_EXISTS
This parameter defines the number of the transport formats. For detailed information of 1,2,3 Enumeration Type D1, D2, D3 this parameter, refer to 3GPP TS 25.302. Select the target BAM to switch over workType Enumeration area. ACTIVE(Active BAM), STANDBY(Standby BAM) ACTIVE,STANDBY When a DCH is set up, the UE starts counting the number 1~512 CRCs within a specified sliding window. If the number of faulty CRCs exce Interval Type of faulty 1~512 If DL code TX power is higher than the Ea absolute threshold, event Ea is triggered. This event triggers DL QoS operation. This parameter spec Interval Type 0~56 0~28, step: 0.5 If DL code TX power is lower than the Eb absolute threshold, event Eb is triggered. When this event report is received, DL QoS operation is sto Interval Type 0~56 0~28, step: 0.5 This parameter specifies the Traffic Handling Priority (THP) of each traffic class carried on the logical channel. The value 1 means the highest Interval Type 1~15 1~15 This parameter specifies the user class associated with interactive traffic handling priority 10. Medium, Low Enumeration Type High, Medium, Low High, This parameter specifies the user class associated with interactive traffic handling priority 11. Medium, Low Enumeration Type High, Medium, Low High, This parameter specifies the user class associated with interactive traffic handling priority 12. Medium, Low Enumeration Type High, Medium, Low High, This parameter specifies the user class associated with interactive traffic handling priority 13. Medium, Low Enumeration Type High, Medium, Low High, This parameter specifies the user class associated with interactive traffic handling priority 14. Medium, Low Enumeration Type High, Medium, Low High, This parameter specifies the user class associated with interactive traffic handling priority 15. Medium, Low Enumeration Type High, Medium, Low High, This parameter specifies the user class associated with interactive traffic handling priority 1. Medium, Low Enumeration Type High, Medium, Low High, This parameter specifies the user class associated with interactive traffic handling priority 2. Medium, Low Enumeration Type High, Medium, Low High, This parameter specifies the user class associated with interactive traffic handling priority 3. Medium, Low Enumeration Type High, Medium, Low High, This parameter specifies the user class associated with interactive traffic handling priority 4. Medium, Low Enumeration Type High, Medium, Low High, This parameter specifies the user class associated with interactive traffic handling priority 5. Medium, Low Enumeration Type High, Medium, Low High, This parameter specifies the user class associated with interactive traffic handling priority 6. Medium, Low Enumeration Type High, Medium, Low High, This parameter specifies the user class associated with interactive traffic handling priority 7. Medium, Low Enumeration Type High, Medium, Low High, This parameter specifies the user class associated with interactive traffic handling priority 8. Medium, Low Enumeration Type High, Medium, Low High, This parameter specifies the user class associated with interactive traffic handling priority 9. Medium, Low Enumeration Type High, Medium, Low High, This parameter specifies the Traffic Handling Priority (THP) class that theLow priorityHigh, Medium,This parameter is valid for only interactiv Enumeration Type High, Medium, THP is mapped to. Low This parameter specifies the timeout duration of a sent ping packet. Interval Type 200~10000 200 to 10000 This parameter specifies the time duration of the packet. 1~3 Interval Type 1 to 3 Specifying the time limitation for blocking a cell when normal priority is selected. Interval Type 1~3600 1~3600 Timer_CU timer. Step is 0.05. This parameter will affect the efficiency and delay of AAL2 transmission. Interval Type 1~64 1~64 This parameter specifies the number of ping packets. Interval Type 1~1024 1 to 1024
This parameter defines the length of the inter-freq coverage handover delay to trig. When the inter-freq coverage handover priority of the reported inter-freq measure cells are lower than the highest priority of the measure cells,start the inter-freq coverage handover delay timer. When the timer expiry or the priority of the reported cells are equal to the highest priority, start interfreq handover. Interval Type 0~1000 0~1000 This parameter specifies the delay time after the RLC entity is established or reconfigured and before the retransmission ratio monitoring is start Interval Type 0~500000 0~500000 Time delay to trigger event 2B. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of event 2B to the change of measured signals. Based on the existing emulation result, the hysteresis value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the fast-moving UE, the call drop rate is more sensitive to the hysteresis value, whereas for the slowmoving UE, the call drop rate is less sensitive to the hysteresis value. This can also reduce ping-pong handovers or wrong Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D128 0,10,20,40,60,80,100,120,160,200,240,320,640,1280,25 handovers. Therefore, for
Time delay to trigger event 2D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of event 2D to the change of measured signals. Based on the existing emulation result, the hysteresis value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the fast-moving UE, the call drop rate is more sensitive to the hysteresis value, whereas for the slowmoving UE, the call drop rate is less sensitive to the hysteresis value. This can also reduce ping-pong handovers or wrong Enumeration Type handovers. Therefore, for
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D128 0,10,20,40,60,80,100,120,160,200,240,320,640,1280,25
Time delay to trigger the event 2F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of event 2F to the change of measured signals. Based on the existing emulation result, the hysteresis value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the fast-moving UE, the call drop rate is more sensitive to the hysteresis value, whereas for the slowmoving UE, the call drop rate is less sensitive to the hysteresis value. This can also reduce ping-pong handovers or wrong Enumeration Type handovers. Therefore, for
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D128 0,10,20,40,60,80,100,120,160,200,240,320,640,1280,25
Time delay for triggering handovers to GSM cells with non-verified BSIC. During the period of time specified by this parameter, if the signal quality in a neighboring GSM cell satisfies inter-RAT handover conditions and the neighboring GSM cell is not verified, an inter-RAT handover is triggered. When the value of this parameter is 65535, the RNC does not perform interRAT handovers to nonverified GSM cells. The higher the time-to-trigger parameters are, the smaller the average number of handovers is, and the possibility of call drops increases. Interval Type
0~64000,65535
0~64000,65535
Time delay for hard handover triggered by periodical reports. Only the inter-frequency cell in which the signal quality meets the requirement in all periodical reports during the period of time specified by this parameter can be selected as the target cell in the interfrequency handover. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of the handover to the change of measured signals. Based on the existing emulation result, the hysteresis value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the Interval Type fast-moving UE, the call
0~64000
0~64000
Time delay for triggering handovers to GSM cells with verified BSIC. During the period of time specified by this parameter, if the signal quality in a neighboring GSM cell satisfies inter-RAT handover conditions and the neighboring GSM cell is verified, an inter-RAT handover is triggered. The inter-RAT handover conditions are as follows: Mother_RAT + CIO >= Tother_RAT + H/2 If the quality of the GSM neighboring cell meets the preceding condition, the system starts the trigger timer. The system then implements the handover decision after timeout if the quality of the GSM neighboring cell always meets the preceding condition throughout the time length of the timer. The time length of the trigger timer is called the delay trigger time. The delay trigger time and hysteresis are used to Interval Type 0~64000 0~64000 prevent mis-decisions This parameter specifies the time from the Type Enumeration moment when the traffic volume of the DCH0, 10, 20,the upper threshold to160,moment D640, the tra D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240,200, 240, 320,D128 exceeds 40, 60, 80, 100, 120, the D320, when 640, This parameter specifies the time from the Type Enumeration moment when the traffic volume on the DCH falls below the lower threshold to the moment when the D0, D10, D20, D40, D60, D80, 10, 20, D120, D160, D200, D240,200, 240, 320,D128 0, D100, 40, 60, 80, 100, 120, 160, D320, D640, 640, This parameter specifies the number of consecutive periods during which the percentage of retransmitted PDUs is higher than the threshold of event A before event A is triggered. Recommended value (default value): 2. Interval Type 1~100 1~100 This parameter specifies the number of consecutive periods during which the percentage of retransmitted PDUs is lower than the threshold of ev Interval Type 1~100 1~100 TRMMAP ID. Interval Type 9~163 9~163 Index of the traffic mapping used by the current adjacent node's bronze user. Interval Type 0~163 0~163 Index of the traffic mapping used by the current adjacent node's gold user. Interval Type 0~163 0~163 Index of the traffic mapping used by the current adjacent node's silver user. Interval Type 0~163 0~163 Signalling link test acknowledgementType It is a protection timer waiting for a signalling link test acknowledgement message (SLTA) from th Interval timer. 8000~12000 8000~12000 Signalling link repeat test timer. This Type is used to send30000~90000 link test messages (SLTM) to the peer end regularly. Interval timer the signalling 30000~90000
Transport type of the Iub interface. Enumeration Type ATM_TRANS(ATM circuit transmission), IP_TRANS(IPATMANDIP_TRANS, HY ATM_TRANS, IP_TRANS, transmission), ATMANDI IUR trans bearer type. Enumeration Type ATM_TRANS, IP_TRANS ATM_TRANS, IP_TRANS The transfers bearer type of Iu interface. Type Enumeration ATM_TRANS, IP_TRANS ATM_TRANS, IP_TRANS This parameter specifies the time offset of the DST from the normal time. Interval Type -120~-1,1~120 -120 to -1, 1 to 120
A positive value relative to Latest Time of Arrival (LToA). It indicates the endpoint of the arrival time window for a downlink data frame. Norm Interval Type 0~2559 0~2559
A positive value relative to Time of arrival window endpoint (ToAWE). It indicates the 0~1279 of the arrival time window for a downlink data Interval Type 0~1279 startpoint The cell will shut down automaticallyType when the total user number is not greater than the threshold. The total user number consists of the DC Interval only 0~5 0~5
This parameter specifies the type of the FAM logs to be collected. "Normal" indicates the text logs collected in the \common\fam\famlog directory under the BAM installation directory. "Format" indicates the binary FAM logs collected in the \common\fam\famlogfmt directory under the BAM installation directory. Enumeration Type NORMAL, FORMAT NORMAL,FORMAT HCS cell reselection penalty timer. The larger the value of the parameter, the longer the HCS penalty time. The smaller the value of the parameter, the shorter the HCS penalty time. Enumeration Type D0, D10, D20, D30, D40, D50, D60 0,10,20,30,40,50,60 This parameter specifies the traffic class. Based on Quality of Service (QoS), thereSTREAMING, INTERACTIVE, BACKGROUNDinteractive Enumeration Type CONVERSATIONAL, are four traffic classes: conversational, streaming, CONVERSATIONAL, STREAMING, INTERACTIVE
This parameter specifies the traffic class that the service belongs to. Based on Quality of Service (QoS), there are two traffic classes: interactive Enumeration Type INTERACTIVE, BACKGROUND INTERACTIVE, BACKGROUND
This parameter specifies the traffic type for the RRC redirection algorithm. PSHSPA AMR,VP,PSR99,PSHSPA Enumeration Type AMR, VP, PSR99, M3UA_OVERRIDE_MOD , M3UA_LOADSHARE_M OD M3UA_OVERRIDE_MOD, M3UA_LOADSHARE_MOD (For details of these two
Transfer Common Channel User number Value range: 0~10 Content: When the system is overloaded and congested, users on the DCH can be reconfigured to the CCH in order to reduce the cell load and recover the system. The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of users selected in executing reconfiguration to the CCH. If the parameter value is too high, the OLC action may fluctuate greatly and over control may occur (the state of overload and congestion turns into another extreme-underload). If the parameter value is too low, the OLC action has a slow response and the effect is not apparent, affecting the OLC performance. Interval Type 0~10 0~10 This parameter specifies the round-trip transport delay of Iub interface when the transmission mode is ATM transmission or of IP dedicated netw Interval Type 0~65535 0~65535 The transport type of the adjacent node of the path.This parameter only effect on Iub interface. Enumeration Type IP, HYBRID_IP IP, HYBRID_IP
Transport type.
Enumeration Type
Uniquely identifying a common transport channel in a cell.1~32 Interval Type Configured according to the1~32 specifications. product This parameter specifies the type of transport channel. Enumeration Type TRCH_HSDSCH, TRCH_EDCH_2MS, TRCH_EDCH_10MS TRCH_HSDSCH, TRCH_EDCH_2MS, TRCH_EDCH This parameter specifies the type of transport channel for the typical RAB. For CS services, this parameter must be set to TRCH_DCH. Enumeration Type TRCH_DCH, TRCH_EDCH_2MS, TRCH_EDCH_10MS TRCH_DCH, TRCH_EDCH_2MS, TRCH_EDCH_10M This parameter specifies the type of transport channel at the local end forTRCH_HSDSCH,For CS services, this parameter must be set to TRCH Enumeration Type TRCH_DCH, the typical RAB. TRCH_EDCH_2MS, TRCH_EDCH_10MS TRCH_DCH, TRCH_HSDSCH, TRCH_EDCH_2MS, T Related length for 1D records in the best cells. In the speed estimation algorithm, an algorithm is adopted to avoid inaccurate estimation caused by frequent handovers of best cells. That is, during the latest [TRELATELENGTH], if more than one event 1D of a certain cell occurs, the event 1D record is restored to the state when the 1st event 1D occurs during the latest [TRELATELENGTH]. The given time length is set by this parameter. If the value is set too large, the RNC judges a non-frequently changing best cell change as a frequently changing one by mistake. If the value is set too small, the speed estimation algorithm may be invalid. It is recommended that this value be set according to Interval Type 0~120 0~120 the cell radius.
If the signal quality (CPICH Ec/No measured by the UE) of a neighboring cell is better than that of the serving cell during the specified time of this parameter, the UE reselects the neighboring cell. It is used to avoid ping-pong reselection between different cells. Note that the value 0 corresponds to the default value defined in the protocol. Set the parameter as follows: 1. Ensure that the UE can reselect a cell when crossing the non-soft-switch area of the cell and that the UE timely performs location updates, cell updates, or URA updates when necessary. 2. Ensure that the UE does not reselect a cell when it is in the soft-switch area of the cell. In this way, the unnecessary location updates, cell updates, and URA updates are avoided. 3. Consider the difference between cells that cover Interval Type 0~31 0~31 different areas, for example This parameter indicates the UE reselction delay in the CELL_FACH connection mode.{0~6.2},{255}, step:0.2 Interval Type 0~31,255 This parameter is not configured when the value is 255. This parameter indicates the UE reselction delay in the CELL_PCH or URA_PCH connection mode. This parameter is not configured when the Interval Type 0~31,255 {0~31},{255} This parameter specifies the index of Type record. Interval a traffic 100~1999 100 to 1999
This parameter specifies the time delay to trigger event 1A. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the incorrect decision probability, but the slower the response of the event to measurement signal change. The purposes of the time-totrigger mechanism are as follows: Reducing the number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the influence of shadow fading on event decisions. The hysteresis can effectively reduce the average number of handovers and wrong decisions, and avoid unnecessary handovers. As for the impact on network performance: The larger the value of this parameter, the smaller the average number of handovers, and the greater Enumeration Type the possibility of call drops.
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D128 0,10,20,40,60,80,100,120,160,200,240,320,640,1280,25
This parameter specifies the time delay to trigger event 1B. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the incorrect decision probability, but the slower the response of the event to measurement signal change. The purposes of the time-totrigger mechanism are as follows: Reducing the number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the influence of shadow fading on event decisions. The hysteresis can effectively reduce the average number of handovers and wrong decisions, and avoid unnecessary handovers. As for the impact on network performance: The larger the value of this parameter, the smaller the average number of handovers, and the greater Enumeration Type the possibility of call drops.
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D128 0,10,20,40,60,80,100,120,160,200,240,320,640,1280,25
This parameter specifies the time delay to trigger event 1C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the incorrect decision probability, but the slower the response of the event to measurement signal change. The purposes of the time-totrigger mechanism are as follows: Reducing the number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the influence of shadow fading on event decisions. The hysteresis can effectively reduce the average number of handovers and wrong decisions, and avoid unnecessary handovers. As for the impact on network performance: The larger the value of this parameter, the smaller the average number of handovers, and the greater Enumeration Type the possibility of call drops.
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D128 0,10,20,40,60,80,100,120,160,200,240,320,640,1280,25
This parameter specifies the time delay to trigger event 1D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the incorrect decision probability, but the slower the response of the event to measurement signal change. The purposes of the time-totrigger mechanism are as follows: Reducing the number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the influence of shadow fading on event decisions. The hysteresis can effectively reduce the average number of handovers and wrong decisions, and avoid unnecessary handovers. As for the impact on network performance: The larger the value of this parameter, the smaller the average number of handovers, and the greater Enumeration Type the possibility of call drops.
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D128 0,10,20,40,60,80,100,120,160,200,240,320,640,1280,25
This parameter specifies the time delay to trigger 1F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the incorrect decision probability, but the slower the response of the event to measurement signal change. The purposes of the time-totrigger mechanism are as follows: Reducing the number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the influence of shadow fading on event decisions. The hysteresis can effectively reduce the average number of handovers and wrong decisions, and avoid unnecessary handovers. As for the impact on network performance: The larger the value of this parameter, the smaller the average number of handovers, and the greater Enumeration Type the possibility of call drops.
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D128 0,10,20,40,60,80,100,120,160,200,240,320,640,1280,25
This parameter specifies the time delay to trigger event 1J. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of event to the change of measured signals. The purposes of the time-totrigger mechanism are as follows: Reducing the number of wrong event reports caused by burst signals. Inhibiting the ping-pong handover to some extent. Reducing the influence of shadow fading on event decisions. The hysteresis can effectively reduce the average number of handovers and wrong decisions, and avoid unnecessary handovers. As for the impact on network performance: The larger the value of this parameter, the smaller the average number of Enumeration Type handovers, and the greater
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D128 0,10,20,40,60,80,100,120,160,200,240,320,640,1280,25
Time delay to trigger the event 2C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of event 2F to the change of measured signals. Based on the existing emulation result, the hysteresis value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the fast-moving UE, the call drop rate is more sensitive to the hysteresis value, whereas for the slowmoving UE, the call drop rate is less sensitive to the hysteresis value. This can also reduce ping-pong handovers or wrong Enumeration Type handovers. Therefore, for
D0, D10, D20, D40, D60, D80, 10, 20, D120, D160, D200, D240,200, 240, 320,D128 0, D100, 40, 60, 80, 100, 120, 160, D320, D640, 640,
Time delay to trigger the event 2D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of event 2F to the change of measured signals. Based on the existing emulation result, the hysteresis value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the fast-moving UE, the call drop rate is more sensitive to the hysteresis value, whereas for the slowmoving UE, the call drop rate is less sensitive to the hysteresis value. This can also reduce ping-pong handovers or wrong Enumeration Type handovers. Therefore, for
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D128 0,10,20,40,60,80,100,120,160,200,240,320,640,1280,25
Time delay to trigger the event 2F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of event 2F to the change of measured signals. Based on the existing emulation result, the hysteresis value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the fast-moving UE, the call drop rate is more sensitive to the hysteresis value, whereas for the slowmoving UE, the call drop rate is less sensitive to the hysteresis value. This can also reduce ping-pong handovers or wrong Enumeration Type handovers. Therefore, for
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D128 0,10,20,40,60,80,100,120,160,200,240,320,640,1280,25
Time delay to trigger the event 3A. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the incorrect decision probability, but the slower the response of the event 3A to measurement signal change. Based on the existing emulation result, the hysteresis value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the fast-moving UE, the call drop rate is more sensitive to the hysteresis value, whereas for the slowmoving UE, the call drop rate is less sensitive to the hysteresis value. This can also reduce ping-pong Enumeration Type handovers or wrong
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D128 0,10,20,40,60,80,100,120,160,200,240,320,640,1280,25
Time delay to trigger the event 3C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the incorrect decision probability, but the slower the response of the event 3C to measurement signal change. Based on the existing emulation result, the hysteresis value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the fast-moving UE, the call drop rate is more sensitive to the hysteresis value, whereas for the slowmoving UE, the call drop rate is less sensitive to the hysteresis value. This can also reduce ping-pong Enumeration Type D0, D10, D20, D40, D60, D80, 10, 20, D120, D160, D200, D240,200, 240, 320,D128 0, D100, 40, 60, 80, 100, 120, 160, D320, D640, 640, handovers or wrong To guarantee the power control performance within a time D0, D10, is, to ensure that D80, 10, 20, D120,within aD200,slot is implemented based o Enumeration Type slot, that D20, D40, D60, the0, D100, 40, 60,D160, time D240,200, 240, 320,D128 power control 80, 100, 120, 160, D320, D640, 640, To guarantee the power control performance within a time D0, D10, is, to ensure that D80, 10, 20, D120,within aD200,slot is implemented based o Enumeration Type slot, that D20, D40, D60, the0, D100, 40, 60,D160, time D240,200, 240, 320,D128 power control 80, 100, 120, 160, D320, D640, 640, This parameter specifies the number of a port that carries the link in a trunk group. Interval Type 0~7 0 to 7 This parameter specifies the slot number for a member port in a trunk group. Interval Type 14~27 14 to 27
This parameter specifies the number of a trunk group. Interval Type 0~7 0 to 7 Radio Link Failure Timer Duration. When the radio link set is in the synchronized state,0~25.5, step: 0.1 the timer after it receives successive o Interval Type 0~255 the NodeB starts Uniquely identifying an RNC. Interval Type 0~4095 0~4095 This parameter specifies the TRUNK IP address for the DHCP server. IP Address Type 0.0.0.0~255.255.255.255 This parameter specifies the IP address of the NodeB TRUNK. IP Address Type 0.0.0.0~255.255.255.255 This parameter specifies the subnet maskType NodeB TRUNK. IP Address for the 0.0.0.0~255.255.255.255 This parameter specifies the number of a trunk group on the logical port. Interval Type 0~7 0~7 This parameter specifies the number of a timeslot. For E1 links, the value of this parameter rangesTS3(Time_slot_3),T1 links, TS8, TS9,of this p Enumeration Type TS1(Time_slot_1), TS2(Time_slot_2), TS3, TS4,31. For TS4(Time_slot_4),TS10, T TS1, TS2, from 1 to TS5, TS6, TS7, the value TS5(T This parameter specifies whether timeslot 16 is used. The setting of this parameter should beOFF Enumeration Type ON, OFF ON, consistent with that at the peer end.
This parameter specifies the timeslot bearing the E1/T1 link. Bit Field Type TS1(Time_slot_1), TS2(Time_slot_2), TS3(Time_slot_3), TS4(Time_slot_4), TS5(T TS1,TS2,TS3,TS4,TS5,TS6,TS7,TS8,TS9,TS10,TS11,T This parameter specifies the index of Type cross connection. The index is automatically generated by the system. Interval timeslot 0~65535 0 to 65535 This parameter specifies the name of the scheduled task to-be started. String Type 1~50 characters Time window for deciding whether the UE is in lowmobility state. Every time the slow speed cycle timer times out, the RNC estimates whether the UE is in low-mobility state. The backdated time length is set by this parameter. Interval Type 0~511 0~511 MGWTST user IMSI in a number segment. String Type 15-bit numerical (0 to 9) string This parameter specifies the time duration of the IP loopback test. During this period, the to 120 Interval Type 1~120 1 DSP sends detection packets at a specified rate. Indicating whether setting MGWTST Switch on. Enumeration Type OFF, ON OFF, ON This parameter specifies the duration Type CPU usage test. Interval of the 1~4294967295 1 to 4294967295 This parameter specifies the time-to-live of a packet detected through EthOAM 1AG link to 128 Interval Type 1~128 1 tracing. This parameter specifies the forward bandwidth of the logical port. Interval Type 10~2810 530~148930 Forward bandwidth of the IP Interval Type path. 1~3000000 1~3000000 This parameter is valid only when Transport Resource Group Type is ATM or Transport Resource Group Type is IP and Bandwidth Mode is FU Interval Type 0~4000000 0~4000000
This parameter indicates whether transmission diversity configuration of the cell is activated. FALSE Enumeration Type TRUE, FALSE TRUE, This parameter specifies the interval of sending the ping packets. Interval Type 200~10000 200 to 10000 This parameter specifies the interval for sending loopback 10~60 Interval Type packets. 10 to 60
This parameter specifies the TX traffic record index at the 100~1999 which the IPoA PVC goes out of the RNC. The TX traffic must have been Interval Type port from 100 to 1999 This parameter specifies the upper layer application type to be set. The type may be CCP, NCP, IPoA NBAP_NCP, IUB_OAM, ALCAP Enumeration Type NBAP_CCP, NBAP_NCP, IUB_OAM, ALCAP or ALCAP. NBAP_CCP, PVC,
Depending on the value of [Band indication], as shown below: Band1 General frequencies: [10562-10838] Additional frequencies: none Band2 General frequencies: [96629938] Additional frequencies: {412,437,462,487,512,537, 562,587,612,637,662,687} Band3 General frequencies: [11621513] Additional frequencies: none Band4 General frequencies: [15371738] Additional frequencies: {1887, 1912, 1937, 1962, 1987, 2012, 2037, 2062, 2087} Band5 General frequencies: [43574458] Additional frequencies: {1007, 1012, 1032,1037, 1062, 1087} Band6 Interval Type General frequencies: [4387-
0~16383
0~16383
Depending on the value of [Band indication], as shown below: Band1: General frequencies: [96129888] Additional frequencies: none Band2: General frequencies: [92629538] Additional frequencies: {12,37,62,87,112,137,162,1 87,212,237,262,287} Band3: General frequencies: [9371288] Additional frequencies: none Band4: General frequencies: [13121513] Additional frequencies: {1662, 1687, 1712, 1737, 1762, 1787, 1812, 1837, 1862} Band5: General frequencies: [41324233] Additional frequencies: {782, 787, 807, 812, 837, 862} Band6: Interval Type General frequencies: [4162-
0~16383
0~16383
Indicating whether the UL frequency of the cell need be configured. TRUE indicates that the UL frequency need be configured. FALSE indicate Enumeration Type TRUE, FALSE TRUE, FALSE This timer is started when an Intervalsignaling entity sends 2000~60000 a request for unblocking an AAL2 path. AAL2 Type the peer node 2000~60000 UDP MUX Max Length. Interval Type 135~1031 135~1031 Receive UDP MUX Mode(Only effect on IuCS interface).MUXCLOSE, NORTPCOMP, RTPCOMP not support UDP RTPCOMP head not MU Enumeration Type Not support udpmux mode means receiver NORTPCOMP, MUX, RTP MUXCLOSE, Sender UDP MUX Mode(Only effect on IuCS interface), Not support udpmux mode means not support UDP MUX, RTP head not MUX mode Enumeration Type MUXCLOSE, NORTPCOMP, RTPCOMP NORTPCOMP, RTPCOMP MUXCLOSE, UDP MUX Max Time. Interval Type 1~10 1~10 Switch for sending A-GPS assistance data in UE-assisted mode. This parameter specifies the REFERENCE_LOCATION_FOR_GPS, DGPS_C Bit Field Type REFERENCE_TIME_FOR_GPS, GPS data to be sent. REFERENCE_TIME_FOR_GPS, REFERENCE_LOCA Switch for sending A-GPS assistance data in UE-based mode. This parameter specifies REFERENCE_TIME_FOR_GPS, REFERENCE_LOCA Bit Field Type REFERENCE_TIME_FOR_GPS, REFERENCE_LOCATION_FOR_GPS, DGPS_C the GPS data to be sent. A timer used to wait UE capability enquiry response . Interval Type 1~10000 1~10000 A timer to RNC wait for the response Type Interval to counter check in security mode procedure. 1~10000 1~10000 This parameter specifies the type of the uninhibition, which can be physical uninhibition and logical uninhibition. PHYSICAL(Physical uninhibi Enumeration Type LOGIC(Logic uninhibit), PHYSICAL(Physical uninhibit) LOGIC(Logic uninhibit), This parameter specifies the unit timeType for the BER test. Interval used 300~1000 300 to 1000 This parameter specifies the upper limit of the alarm. String Type 0~9Characters UL activity factor of the R99 Interval Type AMR conversational service 0~100 might be discontinuously transmitted because of the activation detection of co Signals 0~1, step: 0.01
Duration when the measured Enumeration Type fulfilling the 6A1D20, D40, D60, D80, 10,before the event100, 120,D240,200, 240, triggering value of AMR keeps D0, D10, measurement condition 20, D120, D160, D200,triggered. Event 320,D128 0, D100, 40, 60, 80, 6A1 is 160, D320, D640, 640,
Duration when the measured Enumeration Type fulfilling the 6A1D20, D40, D60, D80, 10,before the event100, 120,D240,200, 240, triggering value of AMR keeps D0, D10, measurement condition 20, D120, D160, D200,triggered. Event 320,D128 0, D100, 40, 60, 80, 6A2 is 160, D320, D640, 640,
Duration when the measured Enumeration Type fulfilling the 6B1 D20, D40, D60, D80, 10, 20, D120,event 100, 120,D240,200, 240,triggering value of AMR keeps D0, D10, measurement condition before the D160, D200, 160, D320, D640, D128 0, D100, 40, 60, 80, 6B1 is triggered. Event 320, 640,
Duration when the measured Enumeration Type fulfilling the 6B2 D20, D40, D60, D80, 10, 20, D120,event 100, 120,D240,200, 240,triggering value of AMR keeps D0, D10, measurement condition before the D160, D200, 160, D320, D640, D128 0, D100, 40, 60, 80, 6B2 is triggered. Event 320, 640,
Duration when the measured Enumeration Type fulfilling the 6D measurement conditionD100, D120, D160, D200, D240,200, 240, 320,D128 value of AMR keeps D0, D10, D20, D40, D60, D80, 10, 20, 40, 60, 80,6D is 120, 160, Event triggering is 0, before the event 100, triggered. D320, D640, 640, UL activity factor of the R99 Interval Type background service. 0~100 0~1, step: 0.01 Value range: D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19 Physical value range: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19 Content: L3 filtering coefficient. The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-slow-fading capability, but the lower the signal change tracing capability. For detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type D0, D1, D2, D3, D4, D5, D6,D0, D1, D2, D3, D4, D5,D15, D7, D8, D9, D11, D13, D D7, D8, D9, D11, D13, D6, D17, D19 Recommended value: D6
This parameter specifies the default rate threshold for decision D16 DCH to carry UL 8, 16 Enumeration Type D8, to use PS domain background/interactive services. If the FRC p UL BE traffic Initial bit rate. Enumeration Type When DCCC function is enabled,D16,uplinkD64, D128, D144, be set to this value if the uplink max bit rate is high D8, the D32, initial bit rate8,16,32,64,128,144,256,384 will D256, D384 The rate decision threshold of UL PS domain background/interactive service to D128, D144, D256, D384, D608,maximum UL service rate is hig Enumeration Type D8, D16, D32, D64, be carried on E-DCH. When the D1440, D2048, D2880, D5740 8,16,32,64,128,144,256,384,608,1440,2048,2880,5740
Duration when the measured Enumerationkeeps fulfilling the 6A1 measurementD60, D80, 10, 20, the event 6A1D200, D240,200, 240, 320,D128 value of BE Type D0, D10, D20, D40, condition before D120, D160, is 120, 160, The trigger time is 0, D100, 40, 60, 80, 100, triggered. D320, D640, 640,
Duration when the measured Enumerationkeeps fulfilling the 6A2 measurementD60, D80, 10, 20, the event 6A2D200, D240,200, 240, 320,D128 value of BE Type D0, D10, D20, D40, condition before D120, D160, is 120, 160, The trigger time is 0, D100, 40, 60, 80, 100, triggered. D320, D640, 640,
Duration when the measured Enumerationkeeps fulfilling the 6B1 measurementD60, D80, 10, 20, the event 6B1D200, D240,200, trigger time is u value of BE Type D0, D10, D20, D40, condition before D120, D160, is 120, 160, The 240, 320,D128 0, D100, 40, 60, 80, 100, triggered. D320, D640, 640,
Duration when the measured Enumerationkeeps fulfilling the 6B2 measurementD60, D80, 10, 20, the event 6B2D200, D240,200, trigger time is u value of BE Type D0, D10, D20, D40, condition before D120, D160, is 120, 160, The 240, 320,D128 0, D100, 40, 60, 80, 100, triggered. D320, D640, 640,
Duration when the measured Enumerationkeeps fulfilling the 6D measurement condition before the event80, 100, 120,D240,200, 240, timeD128 value of BE Type D0, D10, D20, D40, D60, D80, 10, 20, D120, D160, D200, 160, D320, D640, is use 0, D100, 40, 60, 6D is triggered. The trigger 320, 640, Length of smoothing filter window ofType CAC. Interval uplink 1~32 1~32
The admission control decision is only for dedicated channels. For common channels, some resources instead of a special admission procedure are reserved. In the UL, according to the current load factor and the characteristics of the new call, the UL CAC algorithm predicts the new traffic channels load factor with the assumption of admitting the new call, then plus with the premeditated common channel UL load factor to get the predicted UL load factor. Then, compare it with the UL admission threshold. If the value is not higher than the threshold, the call is admitted; otherwise, rejected. If the value is too high, power resources are wasted, which impacts system capacity. If the value is too low, resources can be fully used and coverage may be impacted in case of insufficient resources.
Interval Type
0~100
0~1, step:0.01
Admission threshold of total cell uplink power. This parameter is related to the target load of step:0.01 schedule. The total uplink load fluctuate Interval Type 0~100 0~1, the uplink
This parameter specifies the compression method that the NodeB supports in the uplink. - SF/2: SF reduction by two HIGHER_LAYER_SCHD L: higher layer scheduling If both SF/2 and HIGHER_LAYER_SCHD L are selected, the NodeB supports both of the compression methods in the uplink. Bit Field Type
Number of users selected in aInterval Type domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter are the CS d UL LDR CS 1~10 1~10
Number of users selected in aInterval Type domain inter-RAT SHOULDNOTBE load handover. The target subscribers of this parameter are the UL LDR CS 1~10 1~10
For a BE service that has a low maximum rate, the DCCC D8, D16, D32, D64, D128,effective32, 64, 128, 144, 256, 384 processing. Thus, the tr Enumeration Type algorithm is not obviously D144, D256, D384 8, 16, yet it increases algorithm This parameter specifies the UL FP mode of this type of RAB. For details of normal mode and silent mode, refer to section 5.1.1 of the 3GPP T Enumeration Type NORMAL, SILENT NORMAL, SILENT
Maximum UL rate when coverage of the entire cell is ensured underD32, D64, D128, a BE service that has144, 256, 384 Enumeration Type D8, D16, certain load. For D144, D256, D384 a low maximum rate, the DCCC algo 8, 16, 32, 64, 128,
This parameter specifies the UL GBR of the BE service. D0, D8, D16, D32, D64, D128, 8, 16, 32, 64, 128, 144, 256, 384 Enumeration Type 0, D144, D256, D384
Uplink Credit Reserved by Spread Factor for HandOver. SFOFF means that none of them areSF32(SF32), SF64(SF64),the UL spare resource c Enumeration Type SF4(SF4), SF8(SF8), SF16(SF16), reserved for handover. If SF128(SF128), SF256( SF4,SF8,SF16,SF32,SF64,SF128,SF256,SFOFF If the HS-DPCCH carries ACK/NACK, the system will not perform CAC. If the HS-DPCCH carries CQI, the system will perform CAC. This p Interval Type 0~100 0~1, step:0.01 This parameter specifies the E-DCH data transfer mode of SCHEDULED, NON-SCHEDULED when IMS signalling services are mapped on Enumeration Type IMS signalling services. It isSCHEDULED, NON-SCHEDULED valid only UL activity factor of the R99 Interval Type interactive service. 0~100 0~1, step: 0.01 The UE can be selected to process load handover only when its bandwidth is less than this threshold. The higher the parameter is, the higher the Interval Type 0~400000 0~400000 The inter-frequency neighboring cell could be selected as the destination of load handover only when its load remaining space is larger than this Interval Type 0~100 0~1, step:0.01 The mechanism of the LDR is that anType is performed in each [LDR period] and some services are selected based on the action rules to perfo Interval action 1~10 1~10 Length of smoothing filter window ofType LDR. Interval uplink 1~32 1~32
Number of RABs selected in Interval Type traffic rate reduction. In the actual system, this parameter can be set on the basis of the actual circum a UL LDR BE 1~10 1~10
Reserved SF threshold in uplink credit LDR. The uplink credit LDR could be triggered SF4, when SF16, SF32, SF64, SF128, SF256 uplink rese Enumeration Type SF4(SF4), SF8(SF8), SF16(SF16),SF8, the SF factor corresponding to the only SF32(SF32), SF64(SF64), SF128(SF128), SF256( This parameter has the same content as UlLdrFirstAction. NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff ra Enumeration Type The selected actions, however, should be unique. NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInte
This parameter has the same content as UlLdrFirstAction. NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff ra Enumeration Type The selected actions, however, should be unique. NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInte
NOACT: No load reshuffling action is taken. INTERFREQLDHO: The inter-frequency load handover is performed. BERATERED: Channels are reconfigured for the BE service. QOSRENEGO: The renegotiation on the QoS of the uncontrollable real-time service is performed. CSINTERRATSHOULDB ELDHO: The inter-RAT SHOULDBE load handover of the CS domain is performed. PSINTERRATSHOULDB ELDHO: The inter-RAT SHOULDBE load handover of the PS domain is performed. AMRRATERED (AMR service rate decreasing): The setting of the TFC subset and the negotiation of the service rate can be performed for the AMR voice service. CSINTERRATSHOULDN OTLDHO: The inter-RAT SHOULDBE load handover of the CS domain is Enumeration Type performed.
This parameter has the same content as UlLdrFirstAction. NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff ra Enumeration Type The selected actions, however, should be unique. NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInte
Number of RABs selected in Interval Type a UL LDR uncontrolled real-time traffic QoS renegotiation. The target subscribers of this parameter are the PS dom 1~10 1~10
If the ratio of UL load of the cell to the uplink capacity is lower than this threshold, the UL load reshuffling function of the cell is stopped. After Interval Type 0~100 0~1, step:0.01
This parameter has the same content as UlLdrFirstAction. NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff ra Enumeration Type The selected actions, however, should be unique. NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInte This parameter has the same content as UlLdrFirstAction. NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff ra Enumeration Type The selected actions, however, should be unique. NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInte
This parameter has the same content as UlLdrFirstAction. NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff ra Enumeration Type The selected actions, however, should be unique. NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInte
This parameter has the same content as UlLdrFirstAction. NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff ra Enumeration Type The selected actions, however, should be unique. NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInte
If the ratio of UL load of the cell to the uplink capacity is not lower than this threshold, the UL load reshuffling function of the cell is triggered. Interval Type 0~100 0~1, step:0.01 This parameter specifies the maximum number of TFCs (Transport Format D64, D96, D128, D256,64, 96, 128, 256, 512, 1024 value of this para Enumeration Type D16, D32, D48, Combination) allowed inD512, D1024 larger the 16, 32, 48, the uplink. The
Smooth filtering coefficient for UL measured values. The smooth filtering algorithmD6,0, 1, to avoid5,D11, D13, 11, 13, 15, D1919 Enumeration Type D0, D1, D2, D3, D4, D5, is used 2, 3, D9, random interference in17, D7, D8, 4, 6, 7, 8, 9, D15, D17, measurement repor This parameter determines whether automatic or manual mode is used for 3-step adjustment of the uplink intermediate rate. Enumeration Type AUTO_CALC, HAND_APPOINT 0, 1
Threshold of the UL intermediate rate when the 3-step mode is used for ULD128, D144,16, 32, 64, 128, 144,mode 384 Enumeration Type D16, D32, D64, rate adjustment andD384 D256, the manual 256, is used for UL intermediate ra
To adjust the UL AMR speech rate, AMRC delivers the TFC CONTROL command and starts this timer. If no failure message is received when Interval Type 1~64000 1~64000 UL activity factor of the R99 Interval Type non AMR conversational service. 0~100 0~1, step: 0.01
The percentage of the conversational AMR service threshold to the 100% uplink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the AMR service admission. That is, when an AMR service is accessing, the RNC evalutates the measurement value of the uplink load after the service is accessed. If the UL load of a cell is higher than this threshold after the access of an AMR speech service, this service will be rejected. If the UL load of a cell will not be higher than this threshold, this service will be admitted. The UL load factor thresholds include parameters of [UL threshold of Conv non_AMR service], [UL handover access threshold] and [UL threshold of other services]. The four parameters can be used to limit the proportion between Interval Type the conversational service,
0~100
0~1, step:0.01
The percentage of the handover service admission threshold to the 100% uplink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the handover admission. That is, when a service is handing over to a cell, the RNC evalutates the measurement value of the uplink load after the service is accessed. If the UL load of a cell is higher than this threshold after the access, this service will be rejected. If the UL load of a cell will not be higher than this threshold, this service will be admitted. The UL load factor thresholds include parameters of [UL threshold of Conv non_AMR service], [UL handover access threshold] and [UL threshold of other services]. The four parameters can be used to limit the proportion between the non-handover service, handover user and other Interval Type services in a specific cell,
0~100
0~1, step:0.01
The percentage of the conversational non-AMR service threshold to the 100% uplink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the non-AMR service admission. That is, when a non-AMR service is accessing, the RNC evalutates the measurement value of the uplink load after the service is accessed. If the UL load of a cell is higher than this threshold after the access of a non-AMR speech service, this service will be rejected. If the UL load of a cell will not be higher than this threshold, this service will be admitted. The UL load factor thresholds include parameters of [UL threshold of Conv non_AMR service], [UL handover access threshold] and [UL threshold of other services]. The four parameters can be used to limit the proportion between Interval Type the conversational service,
0~100
0~1, step:0.01
The percentage of other service thresholds to the 100% uplink load. The services refer to other admissions except the conversational AMR service, conversational nonAMR service, and handover scenarios. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling other service admissions. That is, when a service is accessing, the RNC evalutates the measurement value of the uplink load after the service is accessed. If the UL load of a cell is higher than this threshold after the access of a service, this service will be rejected. If the UL load of a cell will not be higher than this threshold, this service will be admitted. The UL load factor thresholds include parameters of [UL threshold of Conv non_AMR service], [UL handover access threshold] and [UL threshold of other services]. The four Interval Type parameters can be used to Length of smoothing filter window ofType OLC. Interval uplink
0~100 1~32
UL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the uplink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus reducing the cell uplink load. The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs selected in executing uplink OLC fast restriction. Selection of RABs of the OLC is based on the service priorities and ARP values and bearing priority indication. The RAB of low priority is under control. In the actual system, UlOlcFTFRstrctRabNum and DlOlcFTFRstrctRabNum can be set on the basis of Interval Type the actual circumstances. If
1~10
1~10
UL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the uplink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus reducing the cell uplink load. The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of uplink OLC fast TF restriction performed in entering/exiting the OLC status. After the overload is triggered, the RNC immediately executes OLC by first executing fast TF restriction. The internal counter is incremented by 1 with each execution. If the number of overloads does not exceed the OLC action threshold, the system lowers Interval Type the BE service rate by
0~100
0~100
L3 filtering coefficient. The larger the value of this parameter, D1, stronger the smoothing effect D2, D3, higher the anti-slow-fading capability, b Enumeration Type D0, the D2, D3, D4, D5, D6,D0, D1, and the D4, D5,D15, D7, D8, D9, D11, D13, D D7, D8, D9, D11, D13, D6, D17, D19
If the ratio of UL load of the cell to the uplink capacity is lower than this threshold, the UL overload and congestion control function of the cell i Interval Type 0~100 0~1, step:0.01
User release is an extreme method in reducing the cell load and recovering the system when the cell is overloaded and congested. The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs released in executing uplink OLC service release. For the users of a single service, the releasing of RABs means the complete releasing of the users. The releasing of RABs causes call drops, so UlOlcFTFRstrctTimes or DlOlcFTFRstrctTimes should be set to a low value. Higher values of the parameter get the cell load to decrease more obviously, but the QoS will be affected.
Interval Type
0~10 1~6000
If the ratio of UL load of the cell to the uplink capacity is not lower than this threshold, the UL overload and congestion control function of the c Interval Type 0~100 0~1, step:0.01
Number of users selected in aInterval Type domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter are the PS d UL LDR PS 1~10 1~10
Number of users selected in aInterval Type domain inter-RAT SHOULDNOTBE load handover. The target subscribers of this parameter are the UL LDR PS 1~10 1~10
Rate adjustment switch of link stability control for UL QoS of AMR services. When theNO, YES is set to YES, UL rate of AMR services can b Enumeration Type NO, YES parameter Inter-frequency handover switch of link stability control for ULYES of AMR services. When the parameter is set to YES, inter-frequency hando Enumeration Type NO, QoS NO, YES Inter-RAT handover switch of link stability control for ULNO, YES Enumeration Type QoS of AMR services. When the YES NO, parameter is set to YES, inter-RAT handover can b Timer length for uplink Qos measurement. This parameter controls the time lengths for the interfrequency and inter-RAT measurement based on Qos. After inter-frequency or inter-RAT measurement starts, if no inter-frequency handover is performed when this timer expires, the measurement is stopped, and the compressed mode is deactivated, if any. If this parameter is set to 0, this indicates that the timer will not be started. For the inter-frequency or inter-RAT measurement based on coverage, the compressed mode can be stopped through reporting event 2F. For measurement that is not based on coverage, event 2F is not reported, and the timer must be set but should not be set to 0. As for the impact on network performance: It reduces the influence of long time compressed mode to the serving cell. Interval Type 0~512 0~512 The compressed mode may Inter-frequency handover switch of link stability control for ULYES of VP services. When the parameter is set to YES, inter-frequency handove Enumeration Type NO, QoS NO, YES Rate adjustment switch of link stability control for UL QoS of WAMR services. When the parameter is set to YES, UL rate of WAMR services Enumeration Type NO, YES NO, YES Inter-frequency handover switch of link stability control for ULYES of WAMR services. When the parameter is set to YES, inter-frequency han Enumeration Type NO, QoS NO, YES Inter-RAT handover switch of link stability control for ULNO, YES Enumeration Type QoS of WAMR services. When the parameter is set to YES, inter-RAT handover can NO, YES This parameter determines whether the ULType is lowered 2_Rates, 3_Rates Enumeration rate to the minimum rate in one step or two3_Rates BE service set up on DCH in uplink. 2_Rates, steps for This parameter determines whether the ULType is raised to2_Rates, 3_Rates in one step or two steps for BE service set up on DCH in uplink. Enumeration rate the maximum rate 2_Rates, 3_Rates
CM implementation approach selection basis. When the uplink spreading factor is greater than or equal to this parameter value, the SF/2 approach will be preferred. Otherwise, the high layer scheduling will be preferred. The SF/2 approach consumes more system resources and therefore this approach is recommended only for low-rate users. The high-layer scheduling requires variable multiplexing positions of transport channels and is applicable to a relatively narrow range. In addition, this approach affects the transmission rate of users and therefore is recommended only when the SF/2 approach is unavailable or there are high-rate users.
Enumeration Type D8, D16, D32, D64, D128, D256 8,16,32,64,128,256 UL activity factor of SRB. Interval Type 0~100 0~1, step: 0.01 This parameter specifies the E-DCH data transfer mode of SCHEDULED,It is valid onlySCHEDULED, NON-SCHEDULED the E-DCH. Enumeration Type SRB services. NON-SCHEDULED when SRB services are mapped onto UL activity factor of the R99 Interval Type streaming service. 0~100 0~1, step: 0.01 This parameter specifies the default rate threshold for decision D16, D32, D64, D128, UL PS D256, D384 144, 256, 384 When the maximum U Enumeration Type D8, to use E-DCH to carry D144, domain 128, 8, 16, 32, 64, streaming services. This parameter specifies the E-DCH data transfer mode of SCHEDULED, NON-SCHEDULED Enumeration Type streaming services. It is valid only when streaming services are mapped onto the E-D SCHEDULED, NON-SCHEDULED Measurement reporting threshold for triggering event 6A1. The event reporting mode is used. Event 6A1 is triggered when the measured value is higher than the absolute threshold 6A1. This event can trigger UL QoS operation. This parameter specifies a relative threshold. Absolute threshold of 6A1 = Max Ul Tx Power - UlThd6A1. Interval Type
0~82
0~82
Measurement reporting threshold for triggering event 6A2.0~82 event reporting mode is 0~82 Event 6A2 is triggered when the measured value i Interval Type The used.
Measurement reporting threshold for triggering event 6B1.0~82 event reporting mode is 0~82 Event 6B1 is triggered when the measured value i Interval Type The used. Measurement reporting threshold for triggering event 6B2.0~82 event reporting mode is 0~82 Event 6B2 is triggered when the measured value i Interval Type The used. When the algorithm 2 is used, this parameter defines the total equivalent user numbers corresponding to the 100% uplink load. The parameter sh Interval Type 1~200 1~200 This parameter specifies the step size Type closed-loop power control performed on UL DPCH. For details of this parameter, refer to the 3GPP Interval of the 1~2 1~2
Duration when the measured Enumerationkeeps fulfilling the 6A1 measurementD60, D80, 10, 20, D120, D160, D200, D240,200, 240, 320,D128 value of VP Type D0, D10, D20, D40, condition before the event 6A1 is 120, 160, The trigger time is 0, D100, 40, 60, 80, 100, triggered. D320, D640, 640,
Duration when the measured Enumerationkeeps fulfilling the 6B1 measurementD60, D80, 10, 20, the event 6B1D200, D240,200, trigger time is u value of VP Type D0, D10, D20, D40, condition before D120, D160, is 120, 160, The 240, 320,D128 0, D100, 40, 60, 80, 100, triggered. D320, D640, 640,
Duration when the measured Enumerationkeeps fulfilling the 6D measurement condition before the event80, 100, 120,D240,200, 240, timeD128 value of VP Type D0, D10, D20, D40, D60, D80, 10, 20, D120, D160, D200, 160, D320, D640, is use 0, D100, 40, 60, 6D is triggered. The trigger 320, 640, Estimated altitude of an uncertain area in the cell center in the WGS-84 coordinates. This is controlled by MTRLGY and valid when MET~0(metric system). Interval Type 0~990 0~990 This parameter specifies the estimated altitude of an uncertain area in the cell center in the WGS-84 coordinates. This is controlled by MTRLGY and valid when IMP~1(British measurement). Interval Type 0~3248 0~3248 Length of the semi-major axis of an uncertain area in the cell center. This is controlled by MTRLGY and valid when MET~0(metric system).
Interval Type
0~1800000
0~1800000
This parameter specifies the length of the semi-major axis of an uncertain area in the cell center. This is controlled by MTRLGY and valid when IMP~1(British measurement). Interval Type Length of the semi-minor axis of an uncertain area in the cell center. This is controlled by MTRLGY and valid when MET~0(metric system).
0~5905440
0~5905440
Interval Type 0~1800000 0~1800000 This parameter specifies the length of the semiminor axis of an uncertain area in the cell center. This is controlled by MTRLGY and valid when IMP~1(British measurement). Interval Type 0~5905440 0~5905440 This parameter specifies the number of a UNI link. Interval Type 0~167 0 to 31(AEUa), 0 to 125(E1 of AOUa),0 to 167(T1 of A This parameter specifies the coefficient of the maximum duration of each counting. The2~20 Interval Type 2~20 maximum duration is MCCH modification period multi ID of the upper node when ISROOTNODE is NO. Interval Type 0~1999 0~1999 Number of the upper class transport resource group. This parameter is valid only when [ISFIRSTCLASS] is NO. Interval Type 0~119 0~119 This parameter specifies the number of the upper-level logical port that carries the logical port to be added. Interval Type 128~447 AEUa(128~191),AOUa(256~383),UOIa(384~447) A cell can belongs to multiple URAs.Type parameter indicates the ID of the first URA that the cell belongs to. The URA is used only by the UT Interval This 0~65535 0~65535 A cell can belongs to multiple URAs.Type parameter indicates the ID of the second URA that the cell belongs to. The URA is used only by the Interval This 0~65535 0~65535 A cell can belongs to multiple URAs.Type parameter indicates the ID of the third URA 0~65535cell belongs to. The URA is used only by the UT Interval This 0~65535 that the A cell can belongs to multiple URAs.Type parameter indicates the ID of the fourth URA that the cell belongs to. The URA is used only by the U Interval This 0~65535 0~65535 A cell can belongs to multiple URAs.Type parameter indicates the ID of the fifth URA that the cell belongs to. The URA is used only by the UT Interval This 0~65535 0~65535 A cell can belongs to multiple URAs.Type parameter indicates the ID of the sixth URA 0~65535cell belongs to. The URA is used only by the UT Interval This 0~65535 that the A cell can belongs to multiple URAs.Type parameter indicates the ID of the seventh URA that the cell belongs to. The URA is used only by the Interval This 0~65535 0~65535 A cell can belongs to multiple URAs.Type parameter indicates the ID of the eighth URA that the cell belongs to. The URA is used only by the U Interval This 0~65535 0~65535
ID of the URA in a cell. The Interval only used by the UTRAN and the CN does not know the URA. The URA consists of multiple cells. When URA is Type 0~65535 0~65535 Number of UTRAN Registration Areas (URAs) which theD1, D2, D3, D4, D5, D6, D7,D1, D2, D3, D4, D5, D6, D7, D8 Enumeration Type cell belongs to. D8
Threshold of used frequency quality for triggering inter-frequency measurement with measurement quantity of Ec/No for CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGGER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only when both conditions are met.) To set this parameter, you need to consider the following factors: The cell signal quality of the used frequency is better and can meet the coverage requirements of the current services. After handover, even if the inter-frequency measurement is triggered Interval Type again, it is very difficult to
-24~0
-24~0
Threshold of used frequency quality for triggering inter-frequency measurement with measurement quantity of RSCP for CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRIGGER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only when both conditions are met.) To set this parameter, you need to consider the following factors: The cell signal quality of the used frequency is better and can meet the coverage requirements of the current services. After handover, even if the inter-frequency measurement is triggered Interval Type again, it is very difficult to
-115~-25
-115~-25
Threshold of used frequency quality for triggering inter-frequency measurement with measurement quantity of Ec/No for PS domain HSPA services. For HSPA services, if the value of [Inter-frequency measure report mode] is set to EVENT_TRIGGER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only when both conditions are met.) To set this parameter, you need to consider the following factors: The cell signal quality of the used frequency is better and can meet the coverage requirements of the current services. After handover, even if the inter-frequency measurement is triggered again, it is very difficult to Interval Type hand over the UE again to
-24~0
-24~0
Threshold of used frequency quality for triggering inter-frequency measurement with measurement quantity of RSCP for PS domain HSPA services. For HSPA services, if the value of [Inter-frequency measure report mode] is set to EVENT_TRIGGER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only when both conditions are met.) To set this parameter, you need to consider the following factors: The cell signal quality of the used frequency is better and can meet the coverage requirements of the current services. After handover, even if the inter-frequency measurement is triggered again, it is very difficult to Interval Type hand over the UE again to
-115~-25
-115~-25
This parameter configures the used frequency measurement quantity to trigger the inter-RAT measurement for the purpose of Qos-based handover. The parameter is valid when the event reporting mode is selected for inter-RAT. Ec/No: signal-to-noise ratio RSCP: received signal code power CPICH_Ec/NO: the measurement quantity used for event 2D and 2F, with unit of dB CPICH_RSCP: the measurement quantity used for event 2D and 2F, with unit of dBm The RNC, in the coveragebased inter-RAT measurement, may configure that the interRAT measurement quantity are delivered according to event 2D that triggers the measurement, which causes the result that the Qosbased inter-RAT measurement cannot refer to the coverage-based Enumeration Type configurations. Under this
Threshold of used frequency quality for triggering inter-frequency measurement with measurement quantity of Ec/No for PS domain nonHSPA services. For PS domain non-HSPA services, if the value of [Inter-frequency measure report mode] is set to EVENT_TRIGGER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only when both conditions are met.) To set this parameter, you need to consider the following factors: The cell signal quality of the used frequency is better and can meet the coverage requirements of the current services. After handover, even if the inter-frequency measurement is triggered Interval Type again, it is very difficult to
-24~0
-24~0
Threshold of used frequency quality for triggering inter-frequency measurement with measurement quantity of RSCP for PS domain nonHSPA services. For PS domain non-HSPA services, if the value of [Inter-frequency measure report mode] is set to EVENT_TRIGGER, this parameter is used to set the measurement control of event 2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only when both conditions are met.) To set this parameter, you need to consider the following factors: The cell signal quality of the used frequency is better and can meet the coverage requirements of the current services. After handover, even if the inter-frequency measurement is triggered Interval Type -115~-25 again, it is very difficult to This parameter specifies whether to use FEType Enumeration or not. Disable, Enable This parameter specifies whether the Mac-ehs entity is applied. Enumeration Type NOTUSED, USED This parameter specifies whether to use MP or not. Enumeration Type Disable, Enable This parameter specifies whether to use the second ESN orDisable, Enable Enumeration Type not.
Indicating whether HCS is used. For details, refer to 3GPPUSED, NOT_USED Enumeration Type TS 25.304. This parameter specifies whether to use PPP or not. Enumeration Type Disable, Enable
The ratio of the users which could launch the handover to inter-RAT neighbour cell. When the parameter is ALL_USER, it means all of the users could be handover to the inter-RAT neighbour cell. When the parameter is HALF, it means only 1/2 of the users could be handover to the inter-RAT neighbour cell. When the parameter is THIRD, it means only 1/3 of the users could be handover to the inter-RAT neighbour cell. When the parameter is QUARTER, it means only 1/4 of the users could be handover to the inter-RAT neighbour cell. Enumeration Type Percentage of User Plane Sharing OutType Interval Offset. Percentage of User Plane Sharing OutType Interval threshold. ALL_USER(All User), HALF(Half), THIRD(THIRD), QUARTER(QUARTER) ALL_USER,HALF,THIRD, QUARTER 5~20 5~20 50~100 50~100
This parameter specifies the user priority. The user classesGOLD, SILVER, COPPER GOLD, SILVER, COPPER Copper. Enumeration Type in descending order of priority are Gold, Silver, and then This parameter specifies whether to use TRUNK or not. Disable, Enable Enumeration Type Disable, Enable This parameter specifies the unit of the peak rate, average CELL/S, minimum rate. Enumeration Type rate, and KBIT/S CELL/S, KBIT/S VCI of the PVC from which the AAL2 Path goes out of the RNC. Interval Type 32~65535 32~65535 This parameter specifies the type of check Type VCL. CC, LOOPBACK Enumeration on the CC, LOOPBACK
VLAN ID flag.
Enumeration Type
DISABLE, ENABLE
DISABLE, ENABLE
This parameter specifies the VLAN ID of the destination IP address. Interval Type 2~4094
2 to 4094
This parameter specifies the VLAN priority. Interval Type AMR voice service downlinkInterval Type factor.
0~7 0~100
0 to 7 0~100
AMR voice primary path. Enumeration Type AMR voice primary path load threshold. Interval Type
CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF 0~100 0~100
AMR voice secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR,CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF AMR voice primary secondary path load ratio threshold. 0~100 Interval Type 0~100 AMR voice service uplink factor. Interval Type 0~100 0~100
This parameter specifies the channel type of VoIP services. - DCH: Both uplink and downlink are preferably carried on DCH. - HSDPA: Uplink is preferably carried on DCH, and downlink is preferably carried on HS-DSCH. - HSPA: Uplink is preferably carried on EDCH, and downlink is preferably carried on HSDSCH. Enumeration Type DCH(UL_DCH,DL_DCH), HSDPA(UL_DCH,DL_HSDSCH), HSPA(UL_EDCH,D DCH, HSDPA, HSPA This parameter decides E-DCH TTI type for VOIP traffic. EDCH_TTI_10ms, EDCH_TTI_2ms Enumeration Type EDCH_TTI_10ms, EDCH_TTI_2ms This parameter specifies whether the alarmType Enumeration reporting for 24 V power is enabled. CLOSE(Close), OPEN(Open) CLOSE,OPEN This parameter specifies the upper threshold for 24 V power alarm. String Type 1~9 character This parameter specifies the lower threshold for 24 V power alarm. String Type 1~9 character This parameter specifies whether the alarmType Enumeration reporting for 48 V power is enabled. CLOSE(Close), OPEN(Open) CLOSE,OPEN This parameter specifies the upper threshold for 48 V power alarm. String Type 1~9 character This parameter specifies the lower threshold for 48 V power alarm. String Type 1~9 character This parameter specifies the index of Type connection. 0~1399 Interval a cross 0 to 1399 VPI of the PVC from which the AAL2 Path goes out of the RNC. Interval Type 0~255 0~255
This parameter indicating whether VP limit in cell. TRUE TRUE, FALSE VP need limit in cell. FALSE indicates that the VP need not limit in Enumeration Type indicates that the TRUE, FALSE When the parameter is set to YES, the QOS control algorithm is used for VP services. WhenYESparameter is set to NO, the QOS control algorit Enumeration Type NO, YES NO, the VP CDR(Call Drop Ratio) Per Spu, ifTyperatio is higher than this threshold in a checking period, need arise KPI alarm. Interval the 0~100 0~100 The minimum number of VP Interval setup attempt Per Spu, the sum of VP service setup attempt need to be higher than this threshold to arise K service Type 0~65534 0~65534 Successful VP service setup ratio Per Type if the ratio is lower than this threshold in a checking period, need arise KPI alarm. Interval Spu, 0~100 0~100 The Minimum number of VPInterval Per Spu, the sum of VP release need to be higher than this threshold to trigger arise KPI alarm which type release Type 0~65534 0~65534 Timer for triggering a secondInterval Type the UL WAMR mode. This parameter specifies the duration of waiting for the voice quality enhanc adjustment of 20~64000 20~64000 This parameter specifies whether the alarmType Enumeration reporting for water is enabled. OPEN(Open) CLOSE(Close), CLOSE,OPEN
This parameter is used to determine the relative threshold of the soft handover based on the measurement of each cell in the active set. The larger the value of the parameter is, the higher the relative threshold is under the same conditions. When Weight is set to 0, the SHO relative threshold depends on only the best cell of the active set. For the definition, refer to 3GPP TS 25.331. When the parameter equals 0, the general quality of the active set is the measurement of the best cell and the SHO relative threshold depends on only the best cell in the active set. When the parameter equals 1, it can be regarded as the equivalent signal strength when maximum ratio combination of down links of all cells in the active set is implemented. As for the impact on network performance: The larger the value of the parameter is, the higher Interval Type thresholds for triggering
0~20
0~2,Step:0.1
Weight used for computing frequency general quality. The larger the value of this parameter, the higher the calculated general quality of the active set. When this parameter is set to 0, the general quality of the active set is the quality of the best cell in the active set. For details about this parameter, refer to the subsection of frequency quality estimation in the section of inter-frequency measurement in 3GPP TS 25.331. This parameter is used for all event-triggered inter-frequency measurements, including those triggered by events 2D, 2F, 2B and 2C. The parameter, however, is not used for periodical interfrequency measurements. The larger the value of this parameter, the higher the estimated quality of the current frequency in the same condition, and the more difficult to trigger inter-frequency handover. The smaller the value of Interval Type this parameter, the lower
0~20
0~2,Step:0.1
Size of the sliding window.It Intervalused to control the transmission rate of the peer end. can be Type 1~32767 1~32767 M3UA_ASP, M3UA_IPSP (For details of ASP and Work mode of M3UA link set. Enumeration Type M3UA_ASP, M3UA_IPSP IPSP, refer to RFC4666.) This parameter specifies the flag of the workspace to be formatted. Enumeration Type Active(Format active area), Standby(Format standby area) Active,Standby This parameter specifies the work mode. The setting of this parameter should be consistent with thatE1_BA, T1(T1), E1(E1) Enumeration Type E1_UNBA(E1 Unbalance), E1_BA(E1 Balance), T1,end. E1_UNBA, at the peer E1 This parameter specifies the time to wait before the restoration. Interval Type 30~60000 30 to 60000 This parameter specifies the X offset Type Interval for connected mode. 1~5 a PTM service in a cell, X UEs that receive this service need to retain in connecte For 1~5 For the PS BE service at a rate of 0 kbit/s, this parameter is used for the rate upsizing for DCCC triggered by event 4A. Unsuccessful rate upsizi Interval Type 0~65535 0~65535 This parameter specifies the time zone where the RNC located. Enumeration Type GMT-1200(GMT-12:00), GMT-1100(GMT-11:00), GMT-1000(GMT-10:00), GMTGMT-1200(GMT-12:00), GMT-1100(GMT-11:00), GM
Unit None s None None None None None None None None 0 0 0 0 0 0 0 -
Default Value
Impact AAL2 Path RNC Cell Cell Cell Cell Cell Cell Cell Physical channel PPP Link(ADD PPPLNK) MLPPP Link, PPP Link(ADD MPLNK) RNC RNC
Enable None ms s
Enable
50 100
AC0:BARRED,AC1:BAR RED,AC2:BARRED,AC3: BARRED,AC4:BARRED, AC5:BARRED,AC6:BAR RED,AC7:BARRED,AC8: RNC BARRED,AC9:BARRED( SET DSACAUTOALGO) None(ADD CELLDSACMANUALPA RA)
None None
None
RNC
s per cent None None None per cent None None None None None
LOCAL ACTIVE -
RNC RNC RNC RNC RNC RNC Cell RNC RNC RNC
None dB None
-6 1
None -6 1
None
Automatic -
RNC Cell Physical channel RNC(SET BOXRPT,SET ALMLVL) SRB(SET ALMPORT) RNC Transmission resource group Cell RNC RNC RNC
None
None
None
ms
3000
RNC Adjacent Node(ACT VCLCC,ADD ADJMAP,ADD ADJNODE) AAL2 Path(LOP VCL,ADD AAL2PATH) Services carried on the network element with the specific ATM address.(ADD AAL2RT) IP Path(ADD IPPATHBIND,A DD IPPATH) IP path(ACT IPPM) Cell Cell
None
None m m
None None
degree
None
Cell
second
None
Cell
None None None None None None None None None None None None None None None None None
FALSE None None ALL Primary None None None None None None None None None None None None
RNC SCTP RAB RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC
3 3 ALLOWED
None
None
None
None
None
None
NO_V None
NO_V
RNC RNC Ethernet Port Ethernet Port NodeB RNC RNC RNC PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP)
None None None None None None None None dBm None None None None None
ENABLE 7 0 15 None None None None 61 None None None None None None(ADD NRNCCELL,ADD QUICKCELLSETUP,ADD CELLSETUP) GSM900_DCS1800_BAN D_USED(ADD GSMCELL)
Ethernet port Physical channel Physical channel Physical channel RNC SRB subrack subrack Cell RNC Ethernet port Ethernet port RNC RNC
Cell
None dB dB dB
0 -30 -20
5 2 1 -
RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC
None
RateDegrade
RNC
None
None
RNC
None s
None 5
RNC RNC
byte ms
D1024 D0
RNC RNC
byte ms
D1024 D0
RNC RNC
byte ms byte ms
D1024 D0 D1024 D0
byte ms
D1024 D0
RNC RNC
byte
D1024
RNC
ms byte ms
D0 D1024 D0
byte ms s s s ms
byte ms kbit/s s
RNC RNC RNC RNC Cell(ADD CELLDCCC) RNC(SET DCCC) RNC RAB RAB
None
None
RNC
None
None
RNC
3 32 512
3000 3 32 512
dB s
100 120
100 120
Cell Cell
None None
06&00&00 0
Cell Cell
None None
ON
01&00&00 ON
Cell Cell
dBm None
5 -
5 None
Cell RAB
FALSE
FALSE
Cell
None None ms
D2 D250
RNC RNC
None
None
Cell
dBm
-92
-92
Cell
REQUIRED(AD D CELLMBDRINT ERRAT,ADD CELLINTERRAT HOCOV,ADD REQUIRED CELLINTERRAT HONCOV) -(SET INTERRATHOC OV,SET INTERRATHON COV)
Cell(ADD CELLMBDRINT ERRAT,ADD CELLINTERRAT HOCOV,ADD CELLINTERRAT HONCOV) RNC(SET INTERRATHOC OV,SET INTERRATHON COV)
None None None None None None None None None None None None
OFF
None None None None None None None None None None OFF
E1/T1 link Cell E1T1 Link RNC board E1T1 link board RNC Corresponding optical port LGC port LGC port
kbit/s
PPP Link(ADD PPPLNK) IMA group(ADD IMAGRP) Fractional link(ADD FRALNK) UNILNK(ADD UNILNK) MLPPP Group, PPP Link(ADD MPGRP)
kbit/s kbit/s
0 0
0 0
kbit/s
AAL2 Path
kbit/s
IP Path
kbit/s
Transmission resource group PPP Link(ADD PPPLNK) IMA group(ADD IMAGRP) Fractional link(ADD FRALNK) UNILNK(ADD UNILNK) MLPPP Group, PPP Link(ADD MPGRP)
kbit/s
kbit/s kbit/s
0 0
0 0
kbit/s
AAL2 Path
kbit/s
IP Path
kbit/s
Transmission resource group PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) UNILNK(ADD UNILNK) Fractional link(ADD FRALNK) IMA group(ADD IMAGRP)
kbit/s
kbit/s kbit/s
0 0
0 0
kbit/s
AAL2 Path
kbit/s
IP Path
0 120 25
0 120 None 25
Transmission resource group LGC port Transmission resource group LGC port
None
NULL
RNC
None
IPoA PVC(ADD IPOAPVC) SAAL(ADD SAALLNK) AAL2 Path(ADD AAL2PATH) LGC port(ADD ATMLOGICPOR T)
None
None
IPoA PVC(ADD IPOAPVC) SAAL(ADD SAALLNK) AAL2 Path(ADD AAL2PATH) LGC port(ADD ATMLOGICPOR T)
None
None None
None
LGC port
None
None
None
None
IPoA PVC(ADD IPOAPVC) SAAL(ADD SAALLNK) AAL2 Path(ADD AAL2PATH) LGC port(ADD ATMLOGICPOR T)
None None None None None SAAL(ADD SAALLNK) IPoA PVC(ADD IPOAPVC) SAAL(ADD SAALLNK) IPoA PVC(ADD IPOAPVC)
None
4500 -
None
Cell
32 512
OFF 32 512
None None
100
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF. RNC 100 RNC
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC 0 RNC 1000 Ethernet port AUTO PVC UNI: 1000 NNI: 200 SAAL 1024 SAALLNK/AAL2PATH/IPOAPVC/VPCLCX using this ATM tra 15 RNC None Cell None Cell
None
None
Cell
None m m
degree second
None None
Cell Cell
degree
None
Cell
None
Cell
m None None
SINGLE_HOST
None 15 SINGLE_HOST
None
ACTIVE SF8 -
Cell(ADD CELLLDB,SET MRSCOPECTRL ,ADD RESERVEOVSF, ADD PRACHACTOAS CMAP,ADD CELLSELRESEL ,ADD CELLPUC,ADD CELLMEAS,AD D CELLOLC,ADD CELLLDR,ADD CELLLDM,ADD CELLHCS,ADD CELLCAC,ADD CELLALGOSWI TCH,ADD CELLACCESSST RICT,ADD CELLMBDRINT ERFREQ,ADD CELLMBMSFAC H,ADD CTCH,ADD AICH,ADD RACHDYNTFS, ADD RACH,ADD PRACHSLOTFO RMAT,ADD PRACHTFC,AD RNC RNC Cell RNC Cell Cell
None
Cell
None
90 -
90 9
Cell RNC
s None None
None
AFFECT
AFFECT
Cell
None None
AFFECT -
AFFECT 45
Cell RNC
per cent
30
30
Cell
None
Cell
None
CFG_DL_BLIND_DETECTION_SWITCH:ON, CFG_HSDPA_64QAM_SWITCH:ON, CFG_ RNC 2 RNC 5 RNC CONVOLUTIONAL CONVOLUTIONAL Transport channel 5 5 IP Path None RNC RNC(ADD IPPATHBIND) None Ethernet port(STR IPCHK) NO NO SCTP NO NO SCTP CRC32 CRC32 SCTP
TEN_MSEC
RNC
None None TEN_MSEC RNC Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS ) Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS ) Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )
None
TEN_MSEC(AD D CELLQUALITY TEN_MSEC MEAS) -(SET QUALITYMEAS ) TEN_MSEC(AD D CELLQUALITY TEN_MSEC MEAS) -(SET QUALITYMEAS ) TEN_MSEC(AD D CELLQUALITY TEN_MSEC MEAS) -(SET QUALITYMEAS )
None
None
Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS ) RNC Cell Cell(ADD CELLSETUP) RNC(ADD NRNCCELL)
dB
dB
Cell
dB
Cell
Cell
False
None
UL_DL_BOTH
UL_DL_BOTH
NodeB
WALKING_SPE Cell(ADD ED_AND_HOT_ WALKING_SPEED_AND CELLCMCF) SPOT_CELL(AD _HOT_SPOT_CELL RNC(SET D CELLCMCF) CMCF) -(SET CMCF)
None
None ms
None
CMP_IU_IMS_PROC_AS _NORMAL_PS_SWITCH: OFF, CMP_IU_SYSHOIN_CMP _IUUP_FIXTO1_SWITCH :OFF, CMP_IUR_H2D_FOR_LO WR5_NRNCCELL_SWIT CH:OFF, CMP_IUR_SHO_DIVCTR L_SWITCH:OFF, CMP_UU_AMR_SID_MU ST_CFG_SWITCH:OFF, CMP_UU_DST_SERV_CE LL_D2E_SWITCH:OFF, CMP_UU_IGNORE_UE_ RLC_CAP_SWITCH:ON, CMP_UU_SERV_CELL_C HG_WITH_ASU_SWITC H:OFF, CMP_UU_SERV_CELL_C HG_WITH_RB_MOD_SW ITCH:ON, CMP_UU_VOIP_UP_PRO C_AS_NORMAL_PS_SWI TCH:ON, CMP_UU_FDPCH_COMP AT_SWITCH:OFF, CMP_UU_AMR_DRD_H HO_COMPAT_SWITCH: OFF, CMP_IU_QOS_ASYMME TRY_IND_COMPAT_SWI RNC TCH:OFF RNC(RST IU,RST IURESOURCE,A DD CNNODE,ADD CNDOMAIN) RAB(ADD TYPRABBASIC, ADD CELLRLPWR)
None
None
None
RNC
None
None None
RNC RNC
None
None None None None None None None None None None
255 ON 3
RNC(ADD CELLDSACMA NUALPARA,AD D SAMBMSPARA, ADD CBSADDR,ADD URA,ADD NODEB,ADD SAC,ADD RAC,ADD LAC,ADD CELLMBMSSA, ADD MBMSSA,SET OPERATORCFG PARA,ADD RNCCBCPUID,A DD IMSIIDNNSCNI DMAP,ADD NRIGLBCNIDM AP,ADD CNNODE,SET IUTIMERANDN UM,ADD CELLCBSSAC,R ST IURESOURCE,R ST IU,ADD CZ,ADD CNOPERATOR) Transmission resource RNC RNC RNC RNC RNC RNC RNC Cell Cell
13
per cent
SF8
None
OFF
FALSE -
FALSE ENGLISH
Cell RNC
COEXIST_MEA S_THD_CHOICE Cell(ADD _INTERFREQ(A COEXIST_MEAS_THD_C CELLHOCOMM) DD HOICE_INTERFREQ RNC(SET CELLHOCOMM) HOCOMM) -(SET HOCOMM)
dB None s s ms ms ms ms ms
70
RNC Cell(ADD CELLDCCC) 20 RNC(SET DCCC) NON-SUPPORTING_UE_ONLY RNC 2 SAAL 30 SAAL 10 SAAL IP:15; ATM:20 RNC IP:15; ATM:20 RNC IP:15; ATM:20 RNC IP:15; ATM:25 RNC
ms
25
25
RNC
ms ms ms ms ms
25 25 25 25 25
ms
50
50
RNC
ms None
50 -
50 None
RNC Cell
dB
Cell
dB
Cell
Cell
dB
Cell
Cell Cell Cell Physical channel UE Ethernet port RNC RNC Cell Cell
WBAMR_BITRA Cell(ADD TE_23.85K(ADD WBAMR_BITRATE_23.8 CELLAMRCWB) CELLAMRCWB) 5K RNC(SET -(SET AMRCWB) AMRCWB)
kbit/s
Cell(ADD NBAMR_BITRA NBAMR_BITRATE_12.20 CELLAMRC) TE_12.20K(ADD K RNC(SET CELLAMRC) AMRC) -(SET AMRC)
5 -
5 None None
CP1_not_Support CP1_not_Supported ed
8 UNAVAILABLE 100
None None
100
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43. When the interface type is Iu-CS, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43. RNC 100 RNC When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-CS, transmission type is ATM or IP, the parameter is NULL. RNC 0 RNC 100 RNC None RNC
0 100 -
OFF 900
RNC RNC
None None
SUPP_NONE None
RNC RNC
None
OFF 100
OFF 100
Cell RNC
None None
100
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43. When the interface type is Iu-CS, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43. RNC 100 RNC
0 100
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-CS, transmission type is ATM or IP, the parameter is NULL. RNC 0 RNC 100 RNC
None
OFF -
DCH 5 5 EDCH_TTI_10ms OFF None BIT4(ADD SCCPCHBASIC) BIT2(ADD PRACHBASIC) 5 50 None ON None None
None BIT4(ADD SCCPCHBASIC) BIT2(ADD PRACHBASIC) Physical channel RNC RNC Transmission resource group RNC RNC RNC
byte ms ms s
16 2 -
30 RNC RATE_UP_AND_DOWN_ON_DCH RNC 30 RNC 100 RNC 16 RAB 2 RAB None RNC 255 RNC
dB dB s
-13 -
-22 -13 0
ms
25(AEUa),200(AOUa)
IMA group
None
RAB
RNC
None
None M3UA(ADD M3DE) RNC(ADD M3LKS,ADD M3RT) Ethernet port RNC Ethernet port RNC Cell
None
None
None
RAB
None None
MAY 50
64
RNC RNC Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS ) RNC RNC RNC RNC(SET FRCCHLTYPEP ARA) Cell(ADD CELLFRC) RNC RNC
ms
ms None None
64(ADD CELLQUALITY MEAS) 64 -(SET QUALITYMEAS )64(ADD CELLQUALITY MEAS) 64 -(SET QUALITYMEAS ) 5 0 0
Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS ) RNC Cell
None
90
90
Cell
None
SF/2
SF/2
NodeB
None
None
Cell
None
80
80
Cell
None
80 3
80 3
None 3 None 3
kbit/s
D64
RNC
D64
kbit/s
kbit/s
D64
RNC
None
SF32
SF32
Cell
85 0 200000 20 1 -
85 0 10 200000 20 1 5
Cell Cell RNC Cell Cell Cell RNC Cell(ADD CELLLDR) NodeB(ADD NODEBLDR) Cell(ADD CELLLDR) NodeB(ADD NODEBLDR) Cell Cell(ADD CELLLDR) NodeB(ADD NODEBLDR)
None no action None None no action 1 None no action no action 1 Cell(ADD CELLLDR) NodeB(ADD NODEBLDR) Cell Cell(ADD CELLLDR) NodeB(ADD NODEBLDR)
per cent
60
60
Cell
None None
inter-freq load handover(ADD CELLLDR) no action(ADD NODEBLDR) no action no action no action BE traff rate reduction(ADD CELLLDR) no action(ADD NODEBLDR)
Cell(ADD CELLLDR) NodeB(ADD NODEBLDR) Cell Cell(ADD CELLLDR) NodeB(ADD NODEBLDR) Cell Cell(ADD CELLLDR) NodeB(ADD NODEBLDR)
None None
None
None None
70 1000 D64 0
D1
HAND_APPOINT
Cell Cell NodeB Cell Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS ) RNC
kbit/s
D128
RNC
ms
3000
RNC
None None
100 5
RNC RNC
None
Cell
None None
3 -
3 D1
Cell RNC
per cent
85
85
Cell
None None
0 -
0 100
Cell RNC
per cent
95
95
Cell
None
75
75
Cell
None
None 1
Cell Cell(ADD CELLLDR) NodeB(ADD NODEBLDR) Cell(ADD CELLLDR) NodeB(ADD NODEBLDR) RNC RNC RNC
20
dB None None
None FALSE
Cell RNC
D64
10 100 D64
dB
50
RNC
dB
50
RNC
dB
120
RNC
dB None
120
RNC
ms
OPEN None
None
IMA group RNC SRB RNC RNC RNC RNC RNC Cell(ADD CELLSETUP) RNC(ADD NRNCCELL)
None
None
None
None
SINGLE_TPC
RNC
None
RNC(ADD MTP3RT,ADD NRNC,ADD CNNODE,ADD MTP3LKS,ADD N7DPC) M3UA(ADD M3DE) Adjacent Node(ADD ADJNODE)
None None
BOTH
BOTH
PVC
None
-18
-18
Cell
dB ms ms
None None
5000 5000 2 NO
ms ms ms ms
60 60 60 60
ms
80
80
RNC
ms
80
80
RNC
None
DR_RRC_DRD_SWITCH:ON,DR_RAB_SING_DRD_SWITCH:ON,DR_RAB_COMB_DRD RNC
None
None
RNC
6 -
6 6 None None
None None
RNC RNC RNC RNC PPP Link(ADD PPPLNK) None MLPPP Link(ADD MPLNK) ON RNC Ethernet port(PING IP) 0(PING IP) RNC(SET None(SET PHBMAP,SET DSCPMAP) DSCPMAP) SCTP(ADD 62(ADD SCTPLNK) SCTPLNK) Board(SET PHBMAP) None Ethernet port None RNC None E1/T1
None
None None None None None None frame slot None None s s None None None None ms None kbit/s None None None dB ms
None IP Route None IP Route None E1/T1 None RNC None RNC None RNC None RNC None RNC Full Ethernet port 20 RNC 180 RNC OFF RNC None Cell CONDITIONALSHUTDOWN CONDITIONALSHUTDOWN Cell None RNC 30 RNC 4 RNC 8 RNC 2 RNC 1 1 Cell None IP Path 500 RNC 100 RNC
30000
ms
dB dB
3000 5000
RNC RNC
41
dB
None bit bit bit bit bit bit bit bit bit bit bit bit None None None
336 D1 16 16
None 336 None None None None None None None None None None None D1 16 16
RNC RAB RAB RAB RAB RAB RAB RAB RAB RAB RAB RAB RAB RAB RAB RAB
None dB
RATE_8KBPS: not selected RATE_16KBPS: not selected RATE_32KBPS: not selected RATE_64KBPS: not selected RATE_128KBPS: selected RATE_144KBPS: not selected RATE_256KBPS: selected RATE_384KBPS: not selected RATE_608KBPS: selected RATE_1440KBPS: not selected RATE_2048KBPS: not selected RATE_2880KBPS: not selected RATE_5740KBPS: not selected RNC None RAB
None
None
RAB
None None None None per cent dB None None None None None None None
2 2 20 10 OFF -
RAB RAB RAB RNC RNC Cell RNC RNC RNC RNC RNC RNC RNC
None None None min min min None None s None None s s
1 1 1 204800 1 60
RNC RNC RNC Cell Cell Cell RNC Ethernet port Ethernet port Ethernet port Ethernet port Ethernet port Ethernet port
1 D1024 50 160
per cent None None None None None None None None None None None None None None None None None None None None None None ms ms None None
80 0.02 0.004 Current 100 0 0.02 0.004 Current 100 0 0.02 0.004 Current 100 0 0.02 0.004 Current 100 0 10(ADD CELLMBMSFAC H) -(SET MSCHFACH,SE T MBMSFACH) REQUIRE 0 -
80 SUN LAST 0.02 0.004 Current 100 0 0.02 0.004 Current 100 0 0.02 0.004 Current 100 0 0.02 0.004 Current 100 0 D16000 D5000 None None
RAB RNC RNC SRB SRB SRB SRB SRB SRB SRB SRB SRB SRB SRB SRB SRB SRB SRB SRB SRB SRB SRB SRB RNC RNC Transport channel Cell
Cell(ADD 10(ADD CELLMBMSFAC CELLMBMSFACH) H) None(SET MBMSFACH) RNC(SET -30(SET MSCHFACH) MSCHFACH,SE T MBMSFACH) REQUIRE Cell 0 Cell None RNC None RNC 4 RNC It must be consistent with theEthernet port peer device
None
Fractional link(ADD FRALNK) IMA group(ADD IMAGRP) 1(ADD Corresponding ATMLOGICPOR optical port(SET T,ADD OPT) UNILNK,ADD 1(ADD Ethernet IMAGRP,ADD ATMLOGICPORT,ADD port(SET FRALNK) UNILNK,SET OPT,ADD ETHPORT) -(ADD IMAGRP,ADD FRALNK) MLPPP Group, PORTFLOWCTR None(ADD PPP Link(ADD LPARA,SET PORTFLOWCTRLPARA, PPPLNK,ADD ETHPORT,SET SET ETHPORT) MPGRP) OPT) 0(ADD UNILNK(ADD 0(ADD IPLOGICPORT,ADD UNILNK) IPLOGICPORT, PPPLNK,ADD MPGRP) LGC port(ADD ADD IPLOGICPORT, PPPLNK,ADD ADD MPGRP) ATMLOGICPOR T) RNC(ADD PORTFLOWCTR LPARA) PPP Link(ADD PPPLNK) MLPPP Link, PPP Link(ADD MPLNK) RNC Cell(ADD CELLSETUP) RNC(ADD NRNCCELL) Cell(ADD CELLSETUP) RNC(ADD NRNCCELL) RNC RNC RNC RNC
16bit None dB
16bit
None
STEPSIZE_1DB None
-30 -200 12 None CFGMML-RNCXYYYYMMDDHHMMSS.t RNC xt(EXP CFGMML) None(BKP DB) None RNC
None
D3
RNC
D32 ON
D32 ON
NodeB Cell
ON(ADD ATMLOGICPOR T,ADD UNILNK,ADD MPGRP,ADD IPLOGICPORT, ADD ON IMAGRP,ADD PPPLNK,ADD FRALNK) -(SET ETHPORT,SET OPT)
Fractional link(ADD FRALNK) Corresponding optical port(SET OPT) PPP Link(ADD PPPLNK) IMA group(ADD IMAGRP) LGC port(ADD ATMLOGICPOR T,ADD IPLOGICPORT) MLPPP Group, PPP Link(ADD MPGRP) UNILNK(ADD UNILNK) Ethernet port(SET ETHPORT) RNC RNC This parameter cannot be modified. RNC IP Path IP Path MLPPP Group RNC
NO 2 256 -
D128 -
Fractional link IMA group Adjacent Node RNC RNC RNC RNC RNC
PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) Fractional link(ADD FRALNK) IMA group(ADD IMAGRP) UNILNK(ADD UNILNK) LGC port(ADD IPLOGICPORT)
kbit/s kbit/s
LGC port
kbit/s
AAL2 Path
kbit/s
IP Path
kbit/s
Transmission resource group PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) Fractional link(ADD FRALNK) IMA group(ADD IMAGRP) UNILNK(ADD UNILNK)
kbit/s
kbit/s kbit/s
0 0
0 0
kbit/s
AAL2 Path
kbit/s
IP Path
kbit/s
PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) Fractional link(ADD FRALNK) IMA group(ADD IMAGRP) UNILNK(ADD UNILNK) LGC port(ADD IPLOGICPORT)
kbit/s
kbit/s
LGC port
kbit/s
AAL2 Path
kbit/s
IP Path
0 15 -
Transmission resource group Physical channel Physical channel Ethernet port Cell
DEG 70 70
DEG 70 70
WBAMR_BITRA Cell(ADD TE_23.85K(ADD WBAMR_BITRATE_23.8 CELLAMRCWB) CELLAMRCWB) 5K RNC(SET -(SET AMRCWB) AMRCWB)
kbit/s
Cell(ADD NBAMR_BITRA NBAMR_BITRATE_12.20 CELLAMRC) TE_12.20K(ADD K RNC(SET CELLAMRC) AMRC) -(SET AMRC)
OFF 10 -
None
Cell
None
None
RNC
Cell
100
100 When the interface type is Iub, transmission type is ATM, the parameter is UBR; transimssion type is dual stack or IP, the parameter is AF13; transimssion type is dual stack or Hybird IP, the parameter is LQAF13. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF13. 30
RNC
None None
30
RNC RNC
100 70
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is UBR; transimssion type is Hybird IP, the parameter is AF13. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC 100 RNC 70 RNC
None None
100
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF33. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43. RNC 100 RNC When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC 0 RNC 30 RNC 100 RNC 100 RNC When the interface type is Iub, transmission type is ATM, the parameter is UBR; transimssion type is dual stack or IP, the parameter is AF23; transimssion type is dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF23.
0 30 100 100
None
RNC
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is UBR; transimssion type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC When the interface type is Iub, transmission type is ATM, the parameter is UBR; transimssion type is dual stack or IP, the parameter is AF23; transimssion type is dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF23.
None
RNC
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is UBR; transimssion type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC When the interface type is Iub, transmission type is ATM, the parameter is UBR; transimssion type is dual stack or IP, the parameter is AF23; transimssion type is dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF23.
None
RNC
30 100 30 100 15
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is UBR; transimssion type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC 30 RNC 100 RNC 30 RNC 100 RNC 15 RNC When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF. RNC 100 RNC When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC 0 RNC 50 RNC
None None
100
0 50
None None
100
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF. RNC 100 RNC When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC 0 RNC 100 RNC When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF33. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43. RNC 100 RNC
0 100
None None
100
0 70
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC 0 RNC 70 RNC When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF33. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43. RNC When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC None RNC
None
None None
None ms ms ms
2 -
None
SingleHost
SingleHost
NodeB
None
dB
-16
-16
Cell
-92 30
None None None None None None None None per cent kbit/s None bit bit bit bit bit bit bit bit None None
70 0 336 D1 -
TRUE 50 100 5 5 100 90 100 70 None 0 336 None None None None None None None D1 None
RNC RNC RNC RNC RNC RNC RNC RNC Cell RNC Cell RAB RAB RAB RAB RAB RAB RAB RAB RAB RNC
E_F_DPCH_OFF 0 5
Cell RNC Cell Cell RNC RNC RNC RNC RNC Cell
None
Cell
None dB
1 2.5dB
1 2.5dB
Cell Cell
None
None
4 -
None 4 D100
MBR
None None None per cent per cent kbit/s None per cent None None None None kbit/s
BasedOnUECap RNC 50 RNC RATE_UP_AND_DOWN_ON_EDCH RNC 100 Cell 100 Cell D256 RNC 100 RNC 100 Cell 5 RNC 100 RNC 90 RNC 100 RNC None RNC
per cent
50
50
Cell
70 0
70 0 When the interface type is Iub, transmission type is ATM, the parameter is UBR; transimssion type is dual stack or IP, the parameter is AF13; transimssion type is dual stack or Hybird IP, the parameter is LQAF13. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF13. 30
Cell Cell
None None
30
RNC RNC
100 100
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is UBR; transimssion type is Hybird IP, the parameter is AF13. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC 100 RNC 100 RNC
None None
100
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF33. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43. RNC 100 RNC When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC 0 RNC 70 RNC 30 RNC 100 RNC 100 RNC When the interface type is Iub, transmission type is ATM, the parameter is UBR; transimssion type is dual stack or IP, the parameter is AF23; transimssion type is dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF23.
0 70 30 100 100
None
RNC
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is UBR; transimssion type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC When the interface type is Iub, transmission type is ATM, the parameter is UBR; transimssion type is dual stack or IP, the parameter is AF23; transimssion type is dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF23.
None
RNC
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is UBR; transimssion type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC When the interface type is Iub, transmission type is ATM, the parameter is UBR; transimssion type is dual stack or IP, the parameter is AF23; transimssion type is dual stack or Hybird IP, the parameter is LQAF23. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transimssion type is IP, the parameter is AF23.
None
RNC
None None None None per cent per cent None None None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is UBR; transimssion type is Hybird IP, the parameter is AF23. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC 30 RNC 100 RNC OPEN SRB 80 SRB 10 SRB 30 RNC 100 RNC None RNC When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF. RNC 100 RNC When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC 0 RNC 15 RNC
None None
100
0 15
None None
100
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF. RNC 100 RNC When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC 0 RNC 50 RNC When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF33. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43. RNC 100 RNC
0 50
None None
100
0 100
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC 0 RNC 100 RNC When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF. RNC When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC 70 RNC None RNC None RNC
None
70 -
dB
dB
dB
dB
dB
dB
dB/ dBm
dB
4(ADD CELLINTERRAT HOCOV,ADD CELLINTERFRE QHOCOV) 4 -(SET INTERRATHOC OV,SET INTERFREQHO COV)
Cell(ADD CELLINTERRAT HOCOV,ADD CELLINTERFRE QHOCOV) RNC(SET INTERRATHOC OV,SET INTERFREQHO COV)
dB/ dBm
4(ADD CELLINTERRAT HOCOV,ADD CELLINTERFRE QHOCOV) 4 -(SET INTERRATHOC OV,SET INTERFREQHO COV)
Cell(ADD CELLINTERRAT HOCOV,ADD CELLINTERFRE QHOCOV) RNC(SET INTERRATHOC OV,SET INTERFREQHO COV)
dB/ dBm
dB
dB
dB
64
720 90 64
ALLOWED
dB
Cell
dB
Cell
Cell
dB
Cell
dB dB dB s ms s ms
Cell Cell Cell SAAL RNC RNC IMA group(ADD IMALNK,ADD IMAGRP) Fractional link(ADD FRALNK) IMA group
None None
None
None
None
None None
V1.1
IMA group
None
OFF
RNC
32 -
kbit/s None None kbit/s None None None None None ms None kbit/s kbit/s None
D32 RNC None RNC None RNC 512 Cell None RNC None RNC None RNC OPEN SRB None RNC 1500 SAAL UIA1-1 RNC 32 Cell 512 Cell CSAMR_INTERFREQ:OFF,Cell CSNONAMR_INTERFREQ:OFF, PSR99_INTERFREQ:OFF, P
dB
-16
-16
Cell
dB
dBm
dB
dBm None
80
80
Cell
D3(ADD CELLMBDRINT ERFREQ,ADD CELLINTERFRE QHONCOV,ADD CELLINTERFRE QHOCOV) -(SET INTERFREQHO NCOV,SET INTERFREQHO COV)
For low speed(5km/h):Range is D4~D6, the recommended value is D5; for middle speed(50km/h):Range is D3~D4, the recommended value is D4; for high speed(120km/h):Range is D2~D4, the recommended value is D2; universal value:Range is D3~D6, the recommended value is D3.(SET INTERFREQHOCOV,AD D CELLINTERFREQHOCO V) D3(ADD CELLMBDRINTERFREQ, SET INTERFREQHONCOV,A DD CELLINTERFREQHONC OV)
Cell(ADD CELLMBDRINT ERFREQ,ADD CELLINTERFRE QHONCOV,ADD CELLINTERFRE QHOCOV) RNC(SET INTERFREQHO NCOV,SET INTERFREQHO COV)
None
None
INTER_FREQ_COV INTER_FREQ_COV
Cell
dB
dBm
dB
dBm None
None
CPICH_EC/NO
CPICH_EC/NO
Cell
60(ADD CELLINTERFRE QHONCOV,ADD CELLINTERFRE QHOCOV) -(SET INTERFREQHO NCOV,SET INTERFREQHO COV) 3(ADD CELLMBDRINT ERFREQ)
Cell(ADD CELLMBDRINT ERFREQ,ADD CELLINTERFRE QHONCOV,ADD CELLINTERFRE QHOCOV) RNC(SET INTERFREQHO NCOV,SET INTERFREQHO COV)
s None
OFF
Sub System
dB
-16
RNC
dB
dBm
dB
dBm
None
SIMINTERFREQRAT SIMINTERFREQRAT
Cell
PERIODICAL_REPORTI NG(SET INTERFREQHOCOV,AD D CELLINTERFREQHOCO V) EVENT_TRIGGER(ADD EVENT_TRIGGE CELLMBDRINTERFREQ) R(ADD CELLMBDRINT ERFREQ)
255 80 -
255 80 NO NO CSAMR_INTERRAT:OFF
dB
dBm
dB
dBm None
80
80
RNC
D3(ADD CELLMBDRINT ERRAT,ADD CELLINTERRAT HONCOV,ADD CELLINTERRAT D3 HOCOV) -(SET INTERRATHON COV,SET INTERRATHOC OV)
Cell(ADD CELLMBDRINT ERRAT,ADD CELLINTERRAT HONCOV,ADD CELLINTERRAT HOCOV) RNC(SET INTERRATHON COV,SET INTERRATHOC OV)
None
None None
YES
RNC
dBm None
21 -
21 DRD
RNC RNC
dB
dBm
dB
dBm
60(ADD CELLINTERRAT HONCOV,ADD CELLINTERRAT HOCOV) -(SET INTERRATHON COV,SET INTERRATHOC OV) 3(ADD CELLMBDRINT ERRAT)
Cell(ADD CELLMBDRINT ERRAT,ADD CELLINTERRAT HONCOV,ADD CELLINTERRAT HOCOV) RNC(SET INTERRATHON COV,SET INTERRATHOC OV)
s None
OFF
Sub System
dBm
dBm
ms
3(ADD CELLINTERRAT HONCOV,ADD CELLINTERRAT HOCOV) 3 -(SET INTERRATHON COV,SET INTERRATHOC OV) None
Cell(ADD CELLINTERRAT HONCOV,ADD CELLINTERRAT HOCOV) RNC(SET INTERRATHON COV,SET INTERRATHOC OV)
dBm
dB
dBm
dB
dBm
PERIODICAL_REPORTI NG(SET INTERRATHOCOV,ADD CELLINTERRATHOCOV ) EVENT_TRIGGER(ADD EVENT_TRIGGE CELLMBDRINTERRAT) R(ADD CELLMBDRINT ERRAT)
255 80 1
255 80 1
dB
dBm
None
D3
D3
Cell
1800
RNC
s None
REQUIRE
REQUIRE
Cell
None None dB
dB
dB
dB dB
18
RNC
dB
dB
dB ms None
60000 None
RNC IPOA Ethernet port(ADD ETHTRKIP,ADD ETHIP) RNC(ADD IPOAPVC,ADD DEVIP) Global(ACT VCLCC) RNC IP Path PPP Link MLPPP Group, PPP Link Ethernet port RNC RNC
None
UDP/IP_HC UDP/IP_HC -
None
Ethernet port
None None None None None None None None None None None None None None None None None None None
NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NO -
NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NOT_BARRED NO None
Cell Cell Cell Cell Cell Cell Cell Cell Cell Cell Cell Cell Cell Cell Cell Cell Ethernet port Transmission resource group
FALSE YES -
None
1 1 -
1 1 1 300 300
NodeB RNC IP path Adjacent Node RNC(ADD ADJMAP,ADD TRMMAP) IP Path(ADD IPPATH) RNC NodeB NodeB RNC RNC
None None None None None None None None None None None None None None
OFF TRUE OFF OFF None IUCS_IUPS 16 byte SBS 155 16 byte SBS 155 16 byte SBS 155 16 byte SBS 155
RNC RNC RNC RNC RAB RNC Corresponding optical port Corresponding optical port Corresponding optical port Corresponding optical port Corresponding optical port Corresponding optical port Corresponding optical port Corresponding optical port
None
None
Optical Port
None
None
Optical Port
None
None
Optical Port
None None ms
None D1 ON
None
RNC(ADD LASNAMAP,AD D CZ,ADD NRNCCELL,AD D SAC,ADD QUICKCELLSET UP,ADD CELLSETUP,AD D RAC,ADD LAC) Cell(ADD GSMCELL)
2 4 25 3 8 -
RNC RNC LGC port LGC port LGC port LGC port LGC port RNC RNC
None
35
per cent
100
10 10
RNC RNC
OFF
None
OFF
30
RNC
FALSE 13
FALSE 13
None
IUBLDR
RNC
None
UULDR
RNC
10
RNC
None
CREDITLDR
RNC
None
CODELDR
RNC
RNC Adjacent Node Adjacent Node Adjacent Node RNC(ADD M3LE) M3UA(ADD M3DE) RNC Ethernet port RNC RNC
None
0 -
ON 0 None None
None
None
E1T1 link
None
E1/T1 link(SET E1T1LOP) Cell(LOP E1T1) E1T1 Link(STR E1T1TST) E1T1 link(SET E1T1) Optical Port(SET COPTLNK)
None
RNC RNC
E1_CRC4_MULTI_FRAMEE1T1 link
Communication Link(ACT VCLCC) VCL(LOP VCL) RNC MLPPP Group, MLPPP Link Ethernet port
None None None None None None None None None None
None
NodeB
None
1 -
1 None None
None
None None None None None None None None None None byte byte
ALL None None None None None 2905 1 None None None None
None
Optical Port RNC RNC RNC RNC RNC The SCTP links of all the subracks, which work as the server and w RNC RNC RNC RNC RNC Ethernet port(PING MAC,ACT ETHCC,ADD ETHMEP,ADD ETHMA) RNC(TRC MAC) NodeB Ethernet port
dBm None
MAP_HSUPA_TTI_2MS_SWITCH:OFF, MAP_INTER_RAT_PS_IN_CHANLE_LIMIT_SW RNC None UE None RNC None PPP Link None MLPPP Group, MLPPP Link None Ethernet port None RNC None Ethernet port Cell(ADD 24(ADD CELLSELRESEL CELLSELRESEL) ) None(ADD NRNCCELL) RNC(ADD NRNCCELL) FALSE RNC
None
Cell
m None
10
None Cell When the application type is NBAP, the recommended value is 10; when the application type is SCTP
None None
1 1
1 1
Cell RNC
bit/s
None
RAB
kbit/s
None
LGC port
None
150
RNC
None None
100 4
RNC SAAL
D15 48 10 1031 64 20
Transport channel RNC RNC RAB Cell Transport channel IP Path RNC Cell Cell
None
RNC
1 0 5 346 -
1 NodeB 0 SAAL When the application type is NBAP, the recommended value is 5; when the application type is M SCTP 346 Cell UNI: 25 NNI: 500 SAAL
RNC
75 12
75 12
Cell RNC
430
Cell
24 24 24 24 1
24 24 24 24 1
FALSE
FALSE
Cell
None
Cell
None None None None None None per cent None None min None None None None
None None None None 100 100 COMMON 1 2 OFF None None TRUE
RNC Ethernet port RNC RNC RNC RNC Cell Cell RNC RNC RNC RNC Cell
1 -
1 OFF D16
Cell RNC RNC Cell(ADD CELLMBMSSA) RNC(ADD SAMBMSPARA, ADD MBMSSA) RNC RNC RNC Cell(ADD CELLMBMSPA RA) RNC(SET RNCMBMSPAR A,ADD SAMBMSPARA)
None
None byte
None ON None
PTM
1000
SAALLNK/AAL2PATH/IPOAPVC/VPCLCX using this ATM tra RNC(SET MBMSPERF,AD D IMSISNAMAP,A DD LASNAMAP,AD D CNOPERATOR) Cell(ADD GSMCELL)
None
None
None
RNC
None
RNC
RNC MLPPP Group SAALLNK/AAL2PATH/IPOAPVC/VPCLCX using this ATM tra Ethernet port Ethernet port
None None
None None None None None None dB None kbit/s None None dB LONG -7 FALSE D14 SF8 None None None LONG None -7 FALSE None D14 SF8 21 Ethernet port Ethernet port Ethernet port MLPPP Group, MLPPP Link Cell Cell Cell LGC port Transport channel NodeB RNC Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )
min
None
min
None
Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS ) Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )
min
None
None
RNC
min min min min None RNC None RNC None RNC
min
None
RNC
None
RNC
min min Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS ) IMA group None RNC
min None
None
None
COMM_MOCN_NRI_GLOBAL_CONFIG_MODE_SWITCH:ON, COMM_MIB_MULTI_PL RNC NO RNC OFF RNC None Port AUTO RNC None Ethernet port
None ms ms ms s None
1000 -
None
MPS_NEUTRAL MCPPP -
SCTP RNC RNC RAB RNC RNC MLPPP Group, MLPPP Link(ADD MPGRP) RNC(ADD MPLNK) SAAL MLPPP Group, MLPPP Link Board RNC
None None
OFF OFF
Cell RNC
OFF -
TRAFFIC_AMR: not selected TRAFFIC_VP: not selected TRAFFIC_BE: not selected TRAFFIC_OTHER: not selected OFF OFF None OFF None
None
60
60
Cell
None
per cent
40
80
50
D16 FALSE
Cell Cell(ADD CELLMBMSFAC H) RNC(SET MBMSFACH) Cell(ADD CELLMBMSFAC H) RNC(SET MBMSFACH) RNC RNC
None
20
20
Cell
None None
16 -
16 None
Cell Cell
None
MET
1500
byte
1000(ADD 1000(ADD PPPLNK) PPPLNK) None(ADD MPGRP) -(ADD MPGRP) ls None None None None None None 100 None 100 3 3 3 1
RNC Ethernet port(SET ETHPORT) SCTP(ADD SCTPLNK) PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) Ethernet port SAAL RNC RNC RNC RNC
D1
RNC
D50 D1 D1
RNC RNC RNC RNC(ADD OPC,ADD N7DPC,ADD M3RT,ADD M3LNK,ADD M3LKS,ADD M3LE,ADD MTP3LKS,ADD MTP3RT) Adjacent Node(ADD ADJNODE) MTP3(ADD MTP3LNK) M3UA(ADD M3DE)
None
None
frame
Transport channel
frame None None None None None None None None None
0 -
Transport channel RNC The SCTP links of all the subracks, which work as the server and w RNC RNC RNC RNC RNC RNC RNC
None
None
Cell
None
None
Cell
None
None
Cell
None
None
None
None
Cell
None
Cell
20
20
Cell
None None
None
RNC
NC0 NC0 4(ADD SAMBMSPARA, ADD CELLMBMSPA 4 RA) -(SET RNCMBMSPAR A) ON 8 8 DIRECT_CONNECT DIRECT_CONNECT None None
Cell Cell(ADD CELLMBMSPA RA) RNC(SET RNCMBMSPAR A,ADD SAMBMSPARA) RNC Cell RNC RNC IP Route(ADD IPRT) RNC(ADD IPRTBIND)
None
15
None None
None
RNC
Cell RNC RNC NodeB NodeB NodeB NodeB(ADD NODEB) Adjacent Node(ADD ADJNODE) Cell(SET MRSCOPECTRL ) RNC(STR NODEBDETECT ,ADD NODEBESN,AD D NODEBIP) NodeB
None
None None
None
None
None
NodeB
None
NodeB(STR NODEBBWRPT, ADD NODEBOLC,AD D IPDL,ADD NODEBALGOP ARA,ADD NODEBLDR,AD D NODEB) (ADD CCP,ADD NCP,ADD LOCELL,ADD NBNODESYNC MONPARA) Cell(ADD QUICKCELLSET UP,ADD CELLSETUP)
None None min None None None None None min s None None None per cent None
R7 R7 30 30 PERIOD PERIOD None None None NORMAL NORMAL None None None PICO_TYPE1 NOT_CONFIGURED NOT_CONFIGURED 0 0 50 50
NodeB NodeB NodeB NodeB NodeB NodeB NodeB NodeB NodeB Adjacent Node NodeB Cell Cell Cell
None
Cell
None
None
None
Cell
FALSE
FALSE
Cell
None
None
None
None
RNC
None
RNC
None
None
None
RNC
None
Services carried on the network element with the specific ATM address.(ADD AAL2RT) NodeB(ADD NODEB)
None
None None
None
RNC
None 0(ADD IPLOGICPORT, ADD MPGRP,ADD PPPLNK) -(SET ETHPORT) per cent None None dB dB dB dB dB dB 4 -4 4 -4 2 -2 OMCH(ADD PPPLNK) Ethernet port(SET ETHPORT) MLPPP Group, PPP Link(ADD MPGRP) LGC port(ADD IPLOGICPORT) Port Queue Port Queue Cell Cell Cell Cell Cell Cell
None None 4 -4 4 -4 2 -2
3000
RNC
ms
None None
None None
RNC RAB
Step_by_Step ACTIVE -
Optical Port RNC Corresponding optical port Cell RNC Cell RNC
RNC AAL2 Path Services carried on the network element with the specific ATM ad IP Path
None
None IP Path(ADD IPPATHBIND,A DD IPPATH) IP path(ACT IPPM) IP Path RNC Transport channel
None
-20
330
330
Cell
dBm dB
Cell
None
None
None s ms
5 1000
byte
128
128
Ethernet port
None
Cell
None
None None
None
IP Path
Invalid
Cell
255.255.255.255 -
IP Path NodeB SCTP NodeB IPoA PVC Cell(ADD CELLINTERRAT HONCOV,ADD CELLINTERRAT HOCOV) RNC(SET INTERRATHON COV,SET INTERRATHOC OV) Cell RAB RAB RAB RAB IP Path
30(ADD CELLINTERRAT HONCOV,ADD CELLINTERRAT HOCOV) 30 -(SET INTERRATHON COV,SET INTERRATHOC OV) s s ms ms None None s 30 D4000 D4000 1 1 5 30 D4000 D4000 1 1 5
ms
ms
ms
ms D16(ADD CELLINTRAFRE QHO) D16 -(SET INTRAFREQHO) D16(ADD CELLINTRAFRE QHO) D16 -(SET INTRAFREQHO) D64(ADD CELLINTRAFRE QHO) D64 -(SET INTRAFREQHO) 150 None Cell(ADD CELLINTRAFRE QHO) RNC(SET INTRAFREQHO) Cell(ADD CELLINTRAFRE QHO) RNC(SET INTRAFREQHO) Cell(ADD CELLINTRAFRE QHO) RNC(SET INTRAFREQHO) RNC Physical channel PPP Link(ADD PPPLNK) MLPPP Link, PPP Link(ADD MPLNK) IP path Board
None
None
Enable
None None
-(ADD FACH,ADD PICH,ADD PCH,ADD SCCPCHTFC,AD D SCCPCHBASIC) 3(ADD PCCPCH) 6(ADD AICH) 4(ADD PRACHBASIC,A DD PRACHTFC,AD D PRACHASC,AD D PRACHSLOTFO RMAT,ADD PRACHACTOAS CMAP,ADD RACH) 2(ADD PCPICH) 0(ADD PSCH) 1(ADD SSCH) None None None None dB None None byte byte byte byte 10 V36 -7 10 128 128 56 128
Physical channel(ADD SSCH,ADD None(ADD FACH,ADD PSCH,ADD PRACHACTOASCMAP,A PRACHBASIC,A DD PCH,ADD DD SCCPCHTFC,ADD PRACHTFC,AD PCCPCH,ADD D FACH,ADD SCCPCHBASIC) PICH,ADD 6(ADD AICH) PRACHASC,AD 4(ADD D PRACHBASIC,ADD PRACHSLOTFO PRACHTFC,ADD RMAT,ADD PRACHASC,ADD PCH,ADD PRACHSLOTFORMAT,A SCCPCHTFC,AD DD RACH) D PCPICH,ADD 2(ADD PCPICH) RACH,ADD 8(ADD PICH) AICH,ADD 0(ADD PSCH) PCCPCH,ADD 1(ADD SSCH) SCCPCHBASIC) Cell(ADD PRACHACTOAS CMAP)
Cell Physical channel Physical channel Cell Ethernet port RNC RNC Ethernet port Ethernet port Ethernet port
None
RNC
None
None
RNC
10 30 1
10 30 1
None
Ethernet port(ADD ETHIP,ADD ETHREDPORT, ACT ETHPORT,SET ETHPORT) Port(SET MSP,SET MSPCMD) RNC(SWP ETHPORT,CLR MSPREP) Loopback optical port(SET OPTLOP) Optical port(ACT MSP) Corresponding optical port(SET OPT) Optical Port(SET COPTLNK) LGC port(ADD IPLOGICPORT) NodeB(ADD CCP) RNC Ethernet port Ethernet port RNC Ethernet port SRB RNC RNC
50 UNI: 750 NNI: 100 None None None CLOSE CLOSE CLOSE CLOSE CLOSE
RNC SAAL RNC RNC Ethernet port SRB SRB SRB SRB SRB
CLOSE 2 -
None
CLOSE SRB In signaling transmission mode, set PowerOffsetPpm to -3; in service transmission mode, set Po Physical channel 2 Physical channel None RNC None LGC port PPP Link(ADD PPPLNK) None MLPPP Link(ADD MPLNK) PPP Link(ADD PPPLNK) Enable MLPPP Group, PPP Link(ADD MPGRP) None RNC 4 Physical channel
20 -
20 Physical channel SIGNATURE0, SIGNATURE1, SIGNATURE2, SIGNATURE3, SIGNATURE4, SIGNATUR Physical channel OFF RNC ON RNC
None None
HIGH -
HIGH None
0 None
Cell IP Route MTP3(ADD MTP3LNK) Priority for the link(ADD M3LNK) RNC(ADD MTP3RT) The route to the specific M3DE decides the sequence.(ADD M3RT)
None
None None
ARP 1
RNC RNC
1 1 1 1 -
1 1 1 1 None
None
None
RNC
None
ITUT
ITUT
RNC
20
RNC
20
RNC
20
RNC
20
RNC
s None None
per cent
100
100
RNC
None None
30
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF13. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF13. When the interface type is Iu-PS, the parameter is AF13. RNC 30 RNC When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF13; transimssion type is Hybird IP, the parameter is LQAF13. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL. RNC 100 RNC 100 RNC -50 Physical channel 70 RNC When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43. When the interface type is Iu-PS, the parameter is AF43. RNC
None
None
100
100
RNC
0 70
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL. RNC 0 RNC 70 RNC
None
Cell
30 100
30 100
RNC RNC
per cent
20
RNC
20
RNC
20
RNC
20
RNC
100 100
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF33. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF33. When the interface type is Iu-PS, the parameter is AF33. RNC When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF33; transimssion type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL. RNC When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF33. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF33. When the interface type is Iu-PS, the parameter is AF33. RNC
None
None
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF33; transimssion type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL. RNC When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF33. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF33. When the interface type is Iu-PS, the parameter is AF33. RNC When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF33; transimssion type is Hybird IP, the parameter is LQAF33. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL. RNC 30 RNC 100 RNC 30 RNC 100 RNC
None
30 100 30 100
None
OFF 100
OFF 100
Cell RNC
None None
100
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is AF43. When the interface type is Iu-PS, the parameter is AF43. RNC 100 RNC
0 100
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL. RNC 0 RNC 100 RNC
PS_BE_EXTRA_LOW_RATE_ACCESS_SWITCH:OFF, PS_BE_INIT_RATE_DYNAMIC_C RNC None RNC None SRB None RNC None RNC
ON OFF ON None 32
1800
RNC
CS2
RNC RNC Port Queue Port Queue Port Queue Port Queue Port Queue Adjacent Node
20
20
None
dB
255
255
Cell
dB
255
255
Cell
dB
255
255
Cell
dB
255
255
Cell
dB
dB
None
FALSE
FALSE
RNC
dBm
dBm
-50
FALSE CPICH_ECNO -
Cell Cell(ADD -58(ADD CELLSELRESEL CELLSELRESEL) ) None(ADD NRNCCELL) RNC(ADD NRNCCELL) Cell(ADD CELLSELRESEL FALSE ) RNC(ADD NRNCCELL) FALSE RNC CPICH_ECNO Cell OFF RNC 5 RNC
None
RAB(ADD TYPRABOLPC) (ADD TYPRABBASIC, ADD TYPRABHSPA, ADD TYPRABRLC,A DD TYPRABDCCC MC) RNC(ADD TYPRABQUALI TYMEAS)
None s
RNC
None
RNC(ADD NRNCCELL,AD D QUICKCELLSET UP,ADD CELLSETUP,AD D RAC) Cell(ADD GSMCELL) Physical channel RNC RNC Cell RNC Transport channel Cell Cell Cell RNC RNC RNC RNC RNC LGC port RNC Cell
SELECT ALL 30000 NO None 120000 230(ADD PCH,ADD FACH) 1(ADD RACH) 5000 68 3000 None None 5000 5000 5000 96 6 130
96 130
30 -
30 None
-(ADD CELLREDIRECT DependOnNCell(ADD ION,SET CELLDRD,SET DRD) REDIRECTION, None(ADD SET DRD) CELLREDIRECTION,SET REDIRECTION) DependOnNCell( ADD CELLDRD)
None
per cent
None
None
None
None
None
None
None
None
None
None
board
None None None ON REHOSTRIGHNOW 3000 5000 10000 15000 20000 3000 45000 5000 5000 10000 5000
board board board RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC
dB
RNC IP Route(ADD IPRT) SAALLNK/AAL 3PATH/IPOAPV C/VPCLCX using this ATM traffic record index(ADD ATMTRF)
None
None
None None s
None
RNC
0 300
RNC RNC
ms
ms
D4000(ADD CELLINTRAFRE QHO) -(SET INTRAFREQHO) D4000(ADD CELLINTRAFRE QHO) -(SET INTRAFREQHO) D1000(ADD CELLINTRAFRE QHO) -(SET INTRAFREQHO) -
1 -
Cell(ADD CELLINTRAFRE D4000 QHO) RNC(SET INTRAFREQHO) Cell(ADD CELLINTRAFRE D4000 QHO) RNC(SET INTRAFREQHO) Cell(ADD CELLINTRAFRE D1000 QHO) RNC(SET INTRAFREQHO) None RAB RESERVED_SWITCH_0_BIT1:OFF, RESERVED_SWITCH_0_BIT2:OFF, RESERVED_SW RNC RESERVED_SWITCH_1_BIT1:ON, RESERVED_SWITCH_1_BIT2:ON, RESERVED_SWIT RNC 0 RNC 4294967295 RNC 0 RNC 255 RNC 5000 RNC PPP Link(ADD PPPLNK) 3 MLPPP Link, PPP Link(ADD MPLNK) None RNC 1 RAB None RNC
None
None
RAB
None
Transport channel
bit dB dB ms ms ms ms
None
RNC(ADD GPS,ADD RNCBASIC,RST IUR,ADD GSMNCELL,AD D INTERFREQNC ELL,ADD INTRAFREQNC ELL,ADD CELLINTRAFRE QHO) Cell(ADD SMLCCELL) (RST RNC)
20 -
LGC port RNC RNC RNC RNC RNC RNC RNC RNC
SHARE
None
None None ms
RNC RNC RNC AAL2 Path AAL2 Path IP Path NodeB LGC port(ADD ATMLOGICPOR T,ADD IPLOGICPORT) Transmission resource group(ADD RSCGRP) RNC SAAL
OFF -
RNC RNC RNC RNC RNC RNC RNC RNC Cell(ADD CELLALGOSWI TCH) NodeB(ADD NODEBALGOP ARA) RNC(SET CACALGOSWIT CH) RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC
None
None None None None None None None None None None None None
0 0
0 None 0 0 0 0 0 0 0 0 0
None
None None None None None None None None None None None None None None None None None s s None None None s s ms
RNC Cell(ADD 0(ADD CELLALGOSWI NODEBALGOP 0(ADD TCH) ARA,ADD NODEBALGOPARA,ADD NodeB(ADD CELLALGOSWI CELLALGOSWITCH) NODEBALGOP TCH) None(SET ARA) -(SET CACALGOSWITCH) RNC(SET CACALGOSWIT CACALGOSWIT CH) CH) 0 RNC None RNC Cell(ADD 0(ADD CELLALGOSWI NODEBALGOP 0(ADD TCH) ARA,ADD NODEBALGOPARA,ADD NodeB(ADD CELLALGOSWI CELLALGOSWITCH) NODEBALGOP TCH) None(SET ARA) -(SET CACALGOSWITCH) RNC(SET CACALGOSWIT CACALGOSWIT CH) CH) 0 RNC None RNC 0 RNC None RNC 0 RNC None RNC 0 RNC None RNC 0 RNC None RNC 0 RNC None RNC 0 RNC None Port 4294967295 4294967295 1 180 180 OFF None None 180 180 D16000 RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC
None
byte ms
D64 D5000
RNC RNC
byte ms
D1024 D0
RNC RNC
byte ms
D1024 D0
RNC RNC
byte ms
D1024 D0
RNC RNC
RNC RNC SCTP SCTP SCTP SCTP SCTP Services carried on the network element with the specific ATM ad
5 5 -
LGC port LGC port LGC port IP Path Transmission resource group
None
SAAL(ADD SAALLNK) AAL2 Path(ADD AAL2PATH) RNC(ADD VPCLCX) IPoA PVC(ADD IPOAPVC)
None
chip
1172
RNC
None
SAAL
None
None None ms
None
None None
None
RNC
None None
False
False
NodeB
chip None
50 -
50 None
None None
None None
None
None
None
RNC Port Port NodeB RNC Cell RNC PPP Link Cell(ADD CELLMBMSFAC H,ADD CELLMBMSSCC PCH) RNC(SET MTCH,SET MBMSFACH,SE T MBMSSCCPCH)
None
kbit/s
OFF
None None
RNC RNC Cell(ADD CELLMBMSFAC H,ADD CELLMBMSSCC PCH) RNC(SET MTCH,SET MBMSFACH,SE T MBMSSCCPCH) Adjacent Node
None
None None
None
None None dB
10 DEDICATED 0
None
HO_TO_GSM_SHOULD_NOT_BE_PERFORM RAB
None s
3 60
RNC RNC
dB
None
None
RNC
TRUE
TRUE
Cell
None
FALSE
FALSE
Cell
None None
None
Cell
None
None
RNC RNC(ADD M3LNK,ADD M3LKS,ADD M3RT,ADD MTP3RT,ADD MTP3LKS) MTP3(ADD MTP3LNK) RNC Transport channel MTP3
None
TRUE -
WBAMR_BITRA Cell(ADD TE_23.85K(ADD WBAMR_BITRATE_23.8 CELLAMRCWB) CELLAMRCWB) 5K RNC(SET -(SET AMRCWB) AMRCWB)
kbit/s
Cell(ADD NBAMR_BITRA NBAMR_BITRATE_12.20 CELLAMRC) TE_12.20K(ADD K RNC(SET CELLAMRC) AMRC) -(SET AMRC)
15
None None
100
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF. RNC 100 RNC When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. RNC 0 RNC 15 RNC 0 Cell None Physical channel 0 Physical channel 1 Physical channel 2 Physical channel
0 15 0 0 1 2
3 B0000 OPEN -
None
Physical channel Physical channel RNC RNC RNC SRB RNC Subsystem(ADD CBSADDR) Sub System(SET NCELLDETECT SWITCH) RNC(ADD IURCOMMSCCP ) (ADD NODEB) Cell RNC RNC RNC VCL RNC RNC Ethernet port Subrack(ADD BRD) (CLR BRD) RNC(ULD RSTINFO,STR CPUUSAGETST) RNC RNC Subrack(ADD ETHREDPORT, ACT MSP) RNC(SET MSP,SWP ETHPORT,CLR MSPREP,SET MSPCMD)
None
None None
None
None
None
None
None
None
RNC
None
None
Optical Port
None
(STR IMATST,ADD PPPLNK) E1/T1 link(SET E1T1LOP) Cell(LOP E1T1) RNC(ADD FLOW,SET BFDPROTOSW, TRC MAC,STR ETHOAMLOOP TST,ADD IPPATHBIND,A DD VLANID,ADD MPLNK,ADD DEVIP,ADD IMAGRP,ADD FRALNK,TRC IPADDR,STR E1T1TST) board(SET CLK) E1/T1(ADD TSCROSS) UNILNK(ADD UNILNK) IMA group(ADD IMALNK) Ethernet port(STR IPCHK,ADD ETHTRKIP,ADD ETHTRKLNK,A DD RNC RNC SAAL Adjacent Node SCTP RNC Board MTP3
None
None
RNC
None
None
RNC
None
OFF
RNC
Cell RNC Ethernet port Cell RNC(ADD SPG) Cell(ADD QUICKCELLSET UP,ADD CELLSETUP)
None
None
None None
None
RNC
None
Ethernet port
per cent
70
70
Cell
per cent
Cell
45 -
45 90
Cell RNC
None
DCH
RNC
15 32 512
FALSE 15 32 512
None None
100
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF. RNC 100 RNC
0 15 -
When the interface type is Iub, transmission type is ATM or IP, the parameter is NOCONFIG; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NOCONFIG. RNC 0 RNC 15 RNC None E1/T1 None RNC None RNC
None
60
None
None
None
None None
None
RNC Ethernet port(PING MAC) RNC(TRC MAC) RNC E1/T1 SAAL Subsystem(ADD CBSADDR) Sub System(SET NCELLDETECT SWITCH) RNC(ADD IURCOMMSCCP ) (ADD NODEB) RNC(ACT CRC,SET ONLINE,SET OFFLINE,FMT DATA) Cell(SET MRSCOPECTRL ) RNC
None
None None None None None None None None None None None None None
None None None None None None None None None None YES NRT
RNC(ADD RNCCBCPUID,T RC IPADDR,SET DEVPATCHPAR A,ADD FLOW,ACT VCLCC,SET BFDPROTOSW, TRC MAC,STR ETHOAMLOOP TST,ADD IPPATHBIND,A CT FAN,STR IPLOPTST,SET SCUPORT,ADD VLANID,ADD MPLNK,SET ETHPORT,SET OPT,ADD DEVIP,UIN BRD,INH BRD,ADD IMAGRP,ADD FRALNK,SET MSP,SET E1T1,SET QUEUEMAP,SW P ETHPORT,ULD RSTINFO,SET OPTLOP,LOD PATCH,STR E1T1TST,SET E1T1LOP,STR board RNC SAAL Adjacent Node SCTP Transmission resource group RNC Board MTP3 RNC RNC RNC
ms s s s
400 60 5 30
-50 -
SRNSR_DSCR_IUR_RESRCE_SWITCH:OFF, SRNSR_DSCR_LOC_SEPRAT_SWITCH:ON RNC 60 RNC None UE None board -50 Physical channel 60 board 70 board
None
None
RAB
per cent
80
DSP
per cent dB dB
0 127 -
85 0 127 None
None RNC(ULD RSTINFO,STR CPUUSAGETST, ADD RNCCBCPUID) Cell(SET MRSCOPECTRL ) NodeB(ADD NODEB) RNC
None
None None
03&00&00
None None None min min min ms s None None None kbit/s kbit/s kbit/s kbit/s kbit/s
It is recommended that the service type of signaling link be CBR, the real-time service be CBR SAALLNK/AAL2PATH/IPOAPVC/VPCLCX using this ATM tra 500 RNC ACTIVE Cell None Cell None Cell None Cell 20000 RNC 20 SCCP 67 SAAL OFF RNC None RNC D16 RNC 32 Cell D384 RNC 512 Cell D16 RNC
None
Physical channel
None RAB(ADD TYPRABOLPC) (ADD TYPRABRLC) IP Path RNC Cell NodeB RNC
None
FALSE NO -
FALSE NO None
None None None None None None None None None None None None None None None None None None None None None None None None
FALSE FALSE FALSE YES 10 OFF 0 OFF OFF OFF OFF OFF 0 0 0 -
None FALSE FALSE FALSE None SUN None None OFF YES 10 OFF 0 OFF OFF OFF OFF OFF 0 0 0 FIRST 60 None
RNC Cell NodeB Cell SRB RNC RNC RNC RNC SCTP SCTP RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC
None 60 10 None None 100 None 180 None None None None None None None None None D2000 D2000 D2000 D30 None D40 5
RNC RNC RNC RNC RNC RNC RNC RNC MTP3B MTP3B MTP3B MTP3B MTP3B MTP3B MTP3B MTP3B MTP3B RNC RNC RNC RNC RNC RNC RNC
s s
RNC
RNC
D0
RNC
10 -
dB
dBm
dB
dBm
dB
dBm
dBm
dBm
dBm
None None
None
None RNC None RNC Configured to 1 when TFsNumber is 1;Configured to 0 when TFsNumber is 2 or 3(ADD FACHDYNTFS) Transport channel None(ADD PCHDYNTFS) 1(ADD RACHDYNTFS)
None None
1(ADD PCHDYNTFS,A 1(ADD DD PCHDYNTFS,ADD FACHDYNTFS) FACHDYNTFS) 2(ADD 2(ADD RACHDYNTFS) RACHDYNTFS) 2 2
Transport channel
Transport channel
None
None
RNC
None
None
RNC
None
None
RNC
None None
170
None 170
RNC MTP3
None
Cell
60
OPEN 45 0
OPEN 45 0
D3
D3
Cell
dB
D2
D2
Cell
dB
ms
ms
ms
480(ADD CELLQUALITY MEAS) 480 -(SET QUALITYMEAS )480(ADD CELLQUALITY MEAS) 480 -(SET QUALITYMEAS )480(ADD CELLQUALITY MEAS) 480 -(SET QUALITYMEAS )
Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )
RNC
ms ms 20(SET LDM) 100(SET SATLDM) 100(SET LDM) 10(ground circuit)/100(satellite transmission)(SET SATLDM) 100 100 RNC
ms ms ms -
RNC
RNC RNC
RNC
ms ms 20(SET LDM) 100(SET SATLDM) RNC Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )
ms
180
None
EXISTS
Physical channel
None
Transport channel
None None None dB dB None None None None None None None None None None None None None None None None None ms s s ms None
2000 2 10 4
None 280 None None None Medium Low Low Low Low Low High High High High High Medium Medium Medium Medium None 2000 2 None 10 4
RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC RNC Ethernet port Ethernet port Cell AAL2 Path Ethernet port
ms ms
5000
5000
RAB
ms
ms
ms
ms
ms
ms ms ms
D240 D2560
D240 D2560
RAB RAB
2 14 -
RAB RAB RNC Adjacent Node Adjacent Node Adjacent Node MTP3B MTP3B
ATM_TRANS -(SET MBMSFACH,AD D FACH) 10(ADD CELLMBMSFAC H,ADD PCH) -(SET MBMSFACH,AD D FACH) 35(ADD CELLMBMSFAC H,ADD PCH) 1
Transport channel
ms
Transport channel
ms None
Cell
None
None
RNC
D0
D0
Cell
s None
None
RAB
None
RNC
None
None
None
None ms None
1 10 -
1 10 None
None
None
-(ADD FACHDYNTFS, ADD FACHLOCH,AD D FACH) 1(ADD RACHDYNTFS, ADD RACH) 3(ADD PCH,ADD PCHDYNTFS) 0(ADD BCH) -
None(ADD FACHDYNTFS,ADD FACHLOCH,ADD FACH) 1(ADD RACHDYNTFS,ADD Transport channel RACH) 3(ADD PCH,ADD PCHDYNTFS) 0(ADD BCH)
10
s s s None
1 255 255 -
ms
ms
ms
ms
ms
ms
ms
ms
ms
ms
ms ms ms None None
None
Ethernet port
50 -
Cell RNC RNC RNC RNC LGC port Cell E1T1 link
None
None None
E1/T1 RNC
240
30 64 -
UE Ethernet port RNC RNC Ethernet port LGC port IP Path Transmission resource group Cell Ethernet port Ethernet port
None ms ms
500 30
None
IPoA PVC(ADD IPOAPVC) AAL2 Path(ADD AAL2PATH) SAAL(ADD SAALLNK) RNC(ADD VPCLCX)
None None
None
None
Cell
None
None
Cell
None None ms byte None None s None None ms ms None ms None None 1031 MUXCLOSE MUXCLOSE 2 1000 None 5000 1031 MUXCLOSE MUXCLOSE 2 None None 5000 5000 None 1000 None 50 Cell RNC IP Path IP Path IP Path IP Path RNC RNC RNC RNC RNC E1T1 Link SRB RNC
ms
ms
ms
ms
ms None
D320(ADD CELLQUALITY MEAS) -(SET QUALITYMEAS )D320(ADD CELLQUALITY MEAS) -(SET QUALITYMEAS )D320(ADD CELLQUALITY MEAS) -(SET QUALITYMEAS )D320(ADD CELLQUALITY MEAS) -(SET QUALITYMEAS )D240(ADD CELLQUALITY MEAS) -(SET QUALITYMEAS ) -
D320
D320
D320
D320
D240
10
Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS ) RNC
RNC
None -(SET FRCCHLTYPEP ARA) D8 D8(ADD CELLFRC) D64 D608 RNC(SET FRCCHLTYPEP ARA) Cell(ADD CELLFRC) RNC RNC
ms
ms
ms
ms
ms None
D640(ADD CELLQUALITY MEAS) -(SET QUALITYMEAS )D1280(ADD CELLQUALITY MEAS) -(SET QUALITYMEAS )D2560(ADD CELLQUALITY MEAS) -(SET QUALITYMEAS )D1280(ADD CELLQUALITY MEAS) -(SET QUALITYMEAS )D240(ADD CELLQUALITY MEAS) -(SET QUALITYMEAS ) -
D640
D1280
D2560
D1280
D240
Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS ) RNC
None
Cell
None
83
83
Cell
None
SF/2 3
SF/2 3
None 3 None 3
kbit/s None
kbit/s
kbit/s
D64
RNC
None per cent None None bit/s per cent None None
SF16 0 200000 20 1 -
Cell Cell RNC RNC Cell Cell Cell RNC Cell(ADD CELLLDR) NodeB(ADD NODEBLDR) Cell(ADD CELLLDR) NodeB(ADD NODEBLDR) Cell Cell(ADD CELLLDR) NodeB(ADD NODEBLDR)
None no action None 1 None 1 no action Cell(ADD CELLLDR) NodeB(ADD NODEBLDR) Cell(ADD CELLLDR) NodeB(ADD NODEBLDR)
per cent
45
45
Cell
None None
Cell(ADD CELLLDR) NodeB(ADD NODEBLDR) Cell Cell(ADD CELLLDR) NodeB(ADD NODEBLDR) Cell(ADD CELLLDR) NodeB(ADD NODEBLDR)
None None
55 D64
D19
HAND_APPOINT
kbit/s
D128
RNC
ms None
1000
RNC
100
RNC
None
75
75
Cell
None
80
80
Cell
None
75
75
Cell
None None
60 -
60 5
Cell RNC
None
Cell
None None
3 -
3 D1
Cell RNC
per cent
85
85
Cell
None None
0 -
0 100
Cell RNC
per cent
95 1
95 1
None 1 None 1
NO NO NO
20
NO NO NO NO 3_Rates 3_Rates
D64
dB
None
RNC
dB
None
RNC
dB dB None dB
ms
ms
ms
80 D640(ADD CELLQUALITY MEAS) -(SET QUALITYMEAS )D640(ADD CELLQUALITY MEAS) -(SET QUALITYMEAS )D240(ADD CELLQUALITY MEAS) -(SET QUALITYMEAS )
None None 80 1
D640
D640
D240
RNC RNC Cell RNC Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )Cell(ADD CELLQUALITY MEAS) RNC(SET QUALITYMEAS )
None
Cell
None
Cell
None
Cell
None
Cell
None
Cell
m None None None None None None None None None None None None None
None None 2 None None None None None None None None None None None
None None
None
None
Cell UNILNK RNC Adjacent Node Transmission resource group LGC port Cell Cell Cell Cell Cell Cell Cell Cell Cell(ADD CELLURA,ADD URA) RNC(ADD NRNCURA) Cell
-12(ADD CELLINTERRAT HOCOV,ADD CELLINTERFRE QHOCOV) -12 -(SET INTERRATHOC OV,SET INTERFREQHO COV)
Cell(ADD CELLINTERRAT HOCOV,ADD CELLINTERFRE QHOCOV) RNC(SET INTERRATHOC OV,SET INTERFREQHO COV)
dB
-92(ADD CELLINTERFRE QHOCOV) -(SET INTERRATHOC OV,SET INTERFREQHO COV) -97(ADD CELLINTERRAT HOCOV)
Cell(ADD CELLINTERRAT HOCOV,ADD CELLINTERFRE QHOCOV) RNC(SET INTERRATHOC OV,SET INTERFREQHO COV)
dBm
-12(ADD CELLINTERFRE QHOCOV) -(SET INTERRATHOC OV,SET INTERFREQHO COV) -13(ADD CELLINTERRAT HOCOV)
Cell(ADD CELLINTERRAT HOCOV,ADD CELLINTERFRE QHOCOV) RNC(SET INTERRATHOC OV,SET INTERFREQHO COV)
dB
-92(ADD CELLINTERFRE QHOCOV) -(SET INTERRATHOC OV,SET INTERFREQHO COV) -107(ADD CELLINTERRAT HOCOV)
Cell(ADD CELLINTERRAT HOCOV,ADD CELLINTERFRE QHOCOV) RNC(SET INTERRATHOC OV,SET INTERFREQHO COV)
dBm
None
-12(ADD CELLINTERFRE QHOCOV) -(SET INTERRATHOC OV,SET INTERFREQHO COV) -13(ADD CELLINTERRAT HOCOV)
Cell(ADD CELLINTERRAT HOCOV,ADD CELLINTERFRE QHOCOV) RNC(SET INTERRATHOC OV,SET INTERFREQHO COV)
dB
-92(ADD CELLINTERFRE QHOCOV) -(SET INTERRATHOC OV,SET INTERFREQHO COV) -107(ADD CELLINTERRAT HOCOV)
Cell(ADD CELLINTERRAT HOCOV,ADD CELLINTERFRE QHOCOV) RNC(SET INTERRATHOC OV,SET INTERFREQHO COV)
Disable
NOT_USED
None
RNC RNC RNC RNC Cell(ADD GSMCELL,ADD CELLHCS) RNC(ADD NRNCCELL) RNC
ALL_USER -
ALL_USER 5 90
None
RNC
DISABLE
None
RNC SAALLNK/AAL2PATH/IPOAPVC/VPCLCX using this ATM tra AAL2 Path PVC SCTP(ADD SCTPLNK) IP Path(ADD IPPATH) RNC(ADD VLANID) IP Path(ADD IPPATH) SCTP(ADD SCTPLNK) Ethernet port(ADD ETHMA)
None
None
70
None 70
RNC RNC
None None
100
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or Hybird IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF. When the interface type is Iu-CS, transmission type is ATM, the parameter is RT_VBR; transimssion type is IP, the parameter is EF. RNC 100 RNC When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transimssion type is dual stack, the parameter is EF; transimssion type is Hybird IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-CS, transmission type is ATM or IP, the parameter is NULL. RNC 0 RNC 70 RNC
0 70
OPEN 28.00 20.00 OPEN 57.00 42.00 False(ADD CELLSETUP,AD D QUICKCELLSET UP) FALSE(ADD NRNCCELL) OPEN
DCH EDCH_TTI_10ms OPEN 28.00 20.00 OPEN 57.00 42.00 None None False(ADD CELLSETUP,ADD QUICKCELLSETUP) FALSE(ADD NRNCCELL) NO 5 100 90 200 3000 OPEN
RNC RNC SRB SRB SRB SRB SRB SRB RNC AAL2 Path Cell(ADD CELLSETUP,AD D QUICKCELLSET UP) RNC(ADD NRNCCELL) RNC RNC RNC RNC RNC RNC SRB
None
0(ADD CELLINTERRAT HOCOV,ADD CELLINTERFRE QHOCOV) 0 -(SET INTERRATHOC OV,SET INTERFREQHO COV)
Cell(ADD CELLINTERRAT HOCOV,ADD CELLINTERFRE QHOCOV) RNC(SET INTERRATHOC OV,SET INTERFREQHO COV)
M3UA_ASP Active -
Parameter Relationship
Interruption Scope
None N (No impact on the UE in idle mode) AAL2 Path This paramter must be configured N (No[PARA]ReHostPolicy[/PARA] is set to REHOSTDELAY. when impact on the UE in idle mode) Not involved The ASCs are configured through N (Impact on PRACHASC[/MML]. in idle mode)Not involved [MML]ADD random access for UEs The ASCs are configured through N (Impact on PRACHASC[/MML]. in idle mode)Not involved [MML]ADD random access for UEs The ASCs are configured through N (Impact on PRACHASC[/MML]. in idle mode)Not involved [MML]ADD random access for UEs The ASCs are configured through N (Impact on PRACHASC[/MML]. in idle mode)Not involved [MML]ADD random access for UEs The ASCs are configured through N (Impact on PRACHASC[/MML]. in idle mode)Not involved [MML]ADD random access for UEs The ASCs are configured through N (Impact on PRACHASC[/MML]. in idle mode)Not involved [MML]ADD random access for UEs The ASCs are configured through N (Impact on PRACHASC[/MML]. in idle mode)Not involved [MML]ADD random access for UEs None Not involved Not involved
None Not involved Not involved None N (No impact on the UE in idle mode) Not involved When [PARA]DsacAutoSwitch[/PARA] impact on the UE in idle mode) configure;else,need not configure. N (No is set to ON,the parameter need Not involved
When [PARA]DsacAutoSwitch[/PARA ] is set to ON,the parameter need configure;else,need not configure. If [MML]ADD CELLDSACMANUALPARA[/ MML][PARA]RestrictionType[/ PARA] value is RestrictionFixed,need set AcRestriction value;when [MML]ADD CELLDSACMANUALPARA[/ MML][PARA]RestrictionType[/ PARA] value is RestrictionFlexible,no need set AcRestriction value. N (No impact on the UE in idle mode) Not involved If [MML]ADD CELLDSACMANUALPARA[/MML][PARA]RestrictionType[/PARA] value is RestrictionFixed,need set AcRestriction value; N (No impact on the UE in idle mode) Not involved
When [PARA]DsacAutoSwitch[/PARA ] is set to ON,the parameter need configure;else,need not configure. If [MML]ADD CELLDSACMANUALPARA[/ MML][PARA]RestrictionType[/ PARA] value is RestrictionFixed,need set AcRestriction value;when [MML]ADD CELLDSACMANUALPARA[/ MML][PARA]RestrictionType[/ PARA] value is RestrictionFlexible,no need set AcRestriction value. N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None Not involved Not involved None Y Subsystem None N (No impact on the UE in idle mode) Not involved Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode) None N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved None Not involved Not involved
1. When the value of [PARA]AGPSRECEIVERTYPE [/PARA] in [MML]ADD GPS[/MML] is set to RNC, the GPS data report period, DGPS data report period, AGPS antenna latitude, AGPS antenna longitude, and AGPS antenna altitude should be set. 1. When the value of [PARA]AGPSRECEIVERTYPE [/PARA] in [MML]ADD GPS[/MML] is set to NODEB, the cell ID, GPS data report period, DGPS data report period, AGPS antenna latitude, AGPS antenna longitude, and AGPS antenna altitude should be set. 1. When the value of [PARA]AGPSRECEIVERTYPE [/PARA] in [MML]ADD GPS[/MML] is set to NRNC_RNC, the RNC ID, GPS data report period, DGPS data report period, AGPS antenna latitude, AGPS antenna longitude, and AGPS antenna altitude should be set. 1. When the value of [PARA]AGPSRECEIVERTYPE [/PARA] in [MML]ADD GPS[/MML] is set to NRNC_NODEB, the RNC ID, Not involved Not involved cell ID, GPS data report period, None N (Impact on acquisition indicator receiving of UEs in idle mode) Not involved None Not involved Not involved
None Not involved Not involved None N (No impact on the UE in idle mode) Not involved When [PARA]BWMODE[/PARA] in [MML]ADD the UE in idle mode) set to HALF_DUPLEX, this parameter is valid;if the [PARA]BWMOD N (No impact on RSCGRP[/MML] is Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]PGPSRECEIVERTYPE[/PARA] in [MML]ADD GPS[/MML] is selected, the ALTITUDE should be set. N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved
This parameter is valid when [PARA]InterFreqReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode) Not involved
None
Not involved
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode) Not involved
None N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM. involved N (No impact on the UE in idle mode) Not None N (no impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
Valid when [PARA]AMRQosPerform[/PARA] is set to YES idle mode) N (no impact on the UE in
Not involved
The adjacent node is already configured by [MML]ADD ADJNODE[/MML]. When the value of [PARA]LNKT[/PARA] in [MML]ACT VCLCC[/MML] is set to AAL2PATH, the adjacent node ID should be set. When the value of [PARA]LNKT[/PARA] in [MML]LOP VCL[/MML] is set to AAL2PATH, the value of [PARA]ANI[/PARA] should be set.
Not involved Not involved Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode) Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode)
Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode)
Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode)
Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode) Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode) Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode) Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode)
None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved When the value of [PARA]OT[/PARA] in [MML]LODUE in idle mode) Step_by_Step, the value of [PARA]AREAFLAG[/PARA] should be s N (No impact on the PATCH[/MML] Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is setTheARP, the ARP packet resend times should be set. Y to service on the Ethernet Port. When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is setNotARP, the ARP packet out-time should be set. Not involved to involved None Not involved Not involved When the value of [PARA]NBTRANTP[/PARA] inthe UE in idle mode) N (No impact on [MML]ADD NODEBIP[/MML] is set to ATMTRANS_IP or ATMANDIPTRANS_IP, th Not involved When the value of [PARA]NBTRANTP[/PARA] inthe UE in idle mode) N (No impact on [MML]ADD NODEBIP[/MML] is set to ATMTRANS_IP or ATMANDIPTRANS_IP, th Not involved ATT needs to be set when [PARA]CNDomainId[/PARA] in [MML]ADDwhether theNot involved set to CS_DOMAIN; ATT does not need to N (For the UE in idle mode, indicating CNDOMAIN[/MML] is the IMSI attach/detach procedure) MS can apply
When the value of [PARA]AUTHTYPE[/PARA] in [MML]ADD PPPLNK[/MML] is set link Y PPP to PAP_V or CHAP_V, the AUTHMODE should be
None
PPP link
None
PPP link
None
Not involved
Not involved
When the value of [PARA]PTYPE[/PARA] in [MML]SET ETHPORT[/MML] is setPort Y to FE,the self-confer parameter is valid. [PARA]AvailablesignatureEndIndex[/PARA] should be access forthe number of preambleinvolved N (Impact on random less than UEs in idle mode)Not signatures. The preamble signature is configured by [ [PARA]AvailablesignatureStartIndex[/PARA] should beaccess for UEs in idle mode)Not involved N (Impact on random no greater than [PARA] AvailablesignatureEndIndex [/PARA]. None N (Impact on random access for UEs in idle mode)Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved When the value of [PARA]SRT[/PARA] in [MML]SET CLK[/MML] is set to RSS, the value of [PARA]BACK8KCLKSW1[/PARA] could be Y RNC When the value of [PARA]SRT[/PARA] in [MML]SET CLK[/MML] is set to RSS, the value of [PARA]BACK8KCLKSW2[/PARA] could be Y RNC None N (No impact on the UE in idle mode) Not involved None Not involved Not involved When the value of [PARA]MODE[/PARA] in [MML]STR IPCHK[/MML] is set to STANDBY, the backup port IP address should be set. Not involved Not involved When the value of [PARA]MODE[/PARA] in [MML]STR IPCHK[/MML] is set to STANDBY, the backup port mask should be set. Not involved Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
Y N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (Impact on cell system message receiving of UEs in idle mode) Not involved
None None None None None None None None None None
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (no impact on the UE in idle mode) N (no impact on the UE in idle mode) N (no impact on the UE in idle mode) N (no impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
Valid when [PARA]BEQosPerform[/PARA] is set to YES; [PARA]BeDlAct2[/PARA] and [PARA]BeDlAct3[/PARA] must be None when [PARA]BeDlAct1[/PARA] is set to None; [PARA]BeDlAct2[/PARA] and [PARA]BeDlAct3[/PARA] must not be equal with [PARA]BeDlAct1[/PARA] when [PARA]BeDlAct1[/PARA] is N (no impact on the UE in idle mode) not set to None; Valid when [PARA]BEQosPerform[/PARA] is set to YES; [PARA]BeDlAct2[/PARA] must be None when [PARA]BeDlAct1[/PARA] is set to None; [PARA]BeDlAct2[/PARA] must not be equal with [PARA]BeDlAct1[/PARA] when [PARA]BeDlAct1[/PARA] is not set to None; [PARA]BeDlAct3[/PARA] must be None when [PARA]BeDlAct2[/PARA] is set to None; [PARA]BeDlAct3[/PARA] must not be equal with [PARA]BeDlAct2[/PARA] and [PARA]BeDlAct1[/PARA] when N (no impact on the UE in idle mode) [PARA]BeDlAct2[/PARA] is
Not involved
Not involved
Valid when [PARA]BEQosPerform[/PARA] is set to YES; [PARA]BeDlAct3[/PARA] must be None when [PARA]BeDlAct1[/PARA] or [PARA]BeDlAct2[/PARA] is set to None; [PARA]BeDlAct3[/PARA] must not be equal with [PARA]BeDlAct1[/PARA] when [PARA]BeDlAct1[/PARA] is not set to None [PARA]BeDlAct3[/PARA] must not be equal with [PARA]BeDlAct2[/PARA] when [PARA]BeDlAct2[/PARA] is None The following relationship must be satisfied: [PARA]BeH2FTvmThd[/PARA] < [PARA]BeEFach2CpcTvmThd[/ PARA]. None The following relationship must be satisfied: [PARA]D2F2PTvmThd[/PARA] < [PARA]BeEFach2DTvmThd[/P ARA]. None The following relationship must be satisfied: [PARA]BeH2FTvmThd[/PARA] < [PARA]BeEFach2HTvmThd[/P ARA]. None None None The following relationship must be satisfied: [PARA]BeH2FTvmThd[/PARA] < [PARA]BeF2CpcTvmThd[/PAR A]. None The following relationship must be satisfied: [PARA]D2F2PTvmThd[/PARA] < [PARA]F2DTvmThd[/PARA].
N (no impact on the UE in idle mode) N (no impact on the UE in idle mode)
N (no impact on the UE in idle mode) N (no impact on the UE in idle mode)
N (no impact on the UE in idle mode) N (no impact on the UE in idle mode)
N (no impact on the UE in idle mode) N (no impact on the UE in idle mode) N (no impact on the UE in idle mode) N (no impact on the UE in idle mode)
N (no impact on the UE in idle mode) N (no impact on the UE in idle mode)
Not involved
None None None The following relationship must be satisfied: [PARA]BeH2FTvmThd[/PARA] < [PARA]BeF2HTvmThd[/PARA] . None None None None None
N (no impact on the UE in idle mode) N (no impact on the UE in idle mode) N (no impact on the UE in idle mode)
N (no impact on the UE in idle mode) N (no impact on the UE in idle mode) N (no impact on the UE in idle mode) N (no impact on the UE in idle mode) N (no impact on the UE in idle mode) N (no impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved Not involved
The following relationship must be satisfied: [PARA]BeH2FTvmThd[/PARA] < [PARA]BeF2HTvmThd[/PARA] ; [PARA]BeH2FTvmThd[/PARA] < [PARA]BeEFach2HTvmThd[/P ARA]; [PARA]BeH2FTvmThd[/PARA] < [PARA]BeEFach2CpcTvmThd[/ PARA]; [PARA]BeH2FTvmThd[/PARA] < [PARA]BeF2CpcTvmThd[/PAR A]. N (no impact on the UE in idle mode) None N (no impact on the UE in idle mode) None N (No impact on the UE in idle mode) Valid when [PARA]BEQosPerform[/PARA] is set theYES in idle mode) N (no impact on to UE
This parameter is available if the value ofimpact on the UE in idle mode) in [MML]SET QOSACT[/MML] is YES. N (No [PARA]BEQosPerform[/PARA] Not involved None N (no impact on the UE in idle mode) Not involved At least one of this parameter and the(No impact on the UE in idle mode) must be set to 15. N [PARA]BetaD[/PARA] parameter Not involved At least one of this parameter and the(No impact on the UE in idle mode) must be set to 15. N [PARA]BetaC[/PARA] parameter Not involved
Valid when [PARA]BEQosPerform[/PARA] is set to YES; [PARA]BeUlAct2[/PARA] and [PARA]BeUlAct3[/PARA] must be None when [PARA]BeUlAct1[/PARA] is set to None; [PARA]BeUlAct2[/PARA] and [PARA]BeUlAct3[/PARA] must not be equal with [PARA]BeUlAct1[/PARA] when [PARA]BeUlAct1[/PARA] is N (no impact on the UE in idle mode) not set to None; Valid when [PARA]BEQosPerform[/PARA] is set to YES; [PARA]BeUlAct2[/PARA] must be None when [PARA]BeUlAct1[/PARA] is set to None; [PARA]BeUlAct2[/PARA] must not be equal with [PARA]BeUlAct1[/PARA] when [PARA]BeUlAct1[/PARA] is not set to None [PARA]BeUlAct3[/PARA] must be None when [PARA]BeUlAct2[/PARA] is set to None; [PARA]BeUlAct3[/PARA] must not be equal with [PARA]BeUlAct2[/PARA] and [PARA]BeUlAct1[/PARA] when N (no impact on the UE in idle mode) [PARA]BeUlAct2[/PARA] is
Not involved
Not involved
Valid when [PARA]BEQosPerform[/PARA] is set to YES; [PARA]BeUlAct3[/PARA] must be None when [PARA]BeUlAct1[/PARA] or [PARA]BeUlAct2[/PARA] is set to None; [PARA]BeUlAct3[/PARA] must not be equal with [PARA]BeUlAct1[/PARA] when [PARA]BeUlAct1[/PARA] is not set to None [PARA]BeUlAct3[/PARA] must not be equal with [PARA]BeUlAct2[/PARA] when N (no impact on the UE in idle mode) Not involved [PARA]BeUlAct2[/PARA] is Valid when [PARA]BEQosPerform[/PARA] is set theYES in idle mode) N (no impact on to UE Not involved Valid only when [PARA]BEQosPerform[/PARA] is set to YES and [PARA]BeUlEvTrigInd[/PARA] is set to SINGLE. N (no impact on the UE in idle mode) Not involved Valid only when [PARA]BEQosPerform[/PARA] is set to YES and [PARA]BeUlEvTrigInd[/PARA] is set to SINGLE. N (no impact on the UE in idle mode) Not involved Valid when [PARA]BEQosPerform[/PARA] is set theYES in idle mode) N (no impact on to UE Not involved
Valid when [PARA]BEQosPerform[/PARA] is set theYES in idle mode) N (no impact on to UE Not involved When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is setNotSBFD or MBFD, the times of out-time of BFD packet Not involved to involved This parameter must satisfy the followingimpact on the [PARA]BGMBR[/PARA] >=Not involved N (No relationship: UE in idle mode) [PARA]BGGBR[/PARA]. This parameter must satisfy the followingimpact on the [PARA]BGMBR[/PARA] >=Not involved N (No relationship: UE in idle mode) [PARA]BGGBR[/PARA]. The value of this parameter must satisfy the following relationshiprelationship: [PARA][BgnAbnormalThd]>=[ BgnUpdateThd][/PARA] . N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
The value of this parameter must satisfy the following relationshiprelationship: [PARA]BgnEndTime[/PARA] >[PARA]MBgnStartTime[/PAR A]
None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
The value of this parameter must satisfy the following relationshiprelationship: [PARA]BgnEndTime[/PARA] >[PARA]MBgnStartTime[/PAR A]
N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved The value of this parameter must satisfy the following relationshiprelationship: [PARA][BgnAbnormalThd]>=[ BgnUpdateThd][/PARA] . N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]TrchType[/PARA] parameter is set to TRCH_DCH. The setting of the [PARA]SirAdjustStep[/PAR N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
This paramter is valid only when is [PARA]BlindHoFlag[/PARA] mode) TRUE. N (No impact on the UE in idle set to
Not involved
This paramter is valid only when [PARA]BlindHOFlag[/PARA] ismode) TRUE. N (No impact on the UE in idle set to
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved N (No impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None Y Cell None Not involved Not involved When the value of [PARA]OT[/PARA] in [MML]LODUE in idle mode) is set to Step_by_Step, the value of [PARA]BT[/PARA] should be set N (No impact on the PATCH[/MML] Not involved None Y RNC None Not involved Not involved None Not involved Not involved When the value of [PARA]BT[/PARA] in [MML]ADD IMAGRP[/MML] is set to AEUainvolved the IMA group number should be set. Not involved Not or AOUa, None Not involved Not involved None Not involved Not involved When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is setthe ON, the MAXBW and MINBW should be set. W Not involved When to value of [PARA]BWADJ[/PARA] in [MML]AD
None Not involved If [PARA]BWADJ[/PARA] is set to be ON,[PARA]BWDHORSVBW[/ PARA],[PARA]BWDCONGBW [/PARA],[PARA]BWDCONGC LRBW[/PARA] must obey the following rules: [PARA]BWDHORSVBW[/PAR A] < [PARA]BWDCONGBW[/PAR A] < [PARA]BWDCONGCLRBW[/P ARA] < [PARA]MINBW[/PARA] or [PARA]BWDHORSVBW[/PAR A] = [PARA]BWDCONGBW[/PAR A] = [PARA]BWDCONGCLRBW[/P ARA] = 0. If [PARA]BWADJ[/PARA] is set to be OFF,[PARA]BWDHORSVBW[/ PARA],[PARA]BWDCONGBW [/PARA],[PARA]BWDCONGC LRBW[/PARA] must obey the following rules: [PARA]BWDHORSVBW[/PAR A] < [PARA]BWDCONGBW[/PAR A] < [PARA]BWDCONGCLRBW[/P ARA] < [PARA]CIR[/PARA] or N (No impact on the UE in idle mode) [PARA]BWDHORSVBW[/PAR None Not involved
Not involved
None
Not involved
[PARA]BWDHORSVBW[/PARA]/[PARA]BWDCONGBW[/PARA]/[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD IPPATH[/MML N (no impact on the UE in connected mode) Not involved
[PARA]BWDHORSVBW[/PARA]/[PARA]BWDCONGBW[/PARA]/[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD RSCGRP[/MM N (No impact on the UE in idle mode) Not involved
None
Not involved
Not involved
If [PARA]BWADJ[/PARA] is set to be ON,[PARA]BWDHORSVBW[/ PARA],[PARA]BWDCONGBW [/PARA],[PARA]BWDCONGC LRBW[/PARA] must obey the following rules: [PARA]BWDHORSVBW[/PAR A] < [PARA]BWDCONGBW[/PAR A] < [PARA]BWDCONGCLRBW[/P ARA] < [PARA]MINBW[/PARA] or [PARA]BWDHORSVBW[/PAR A] = [PARA]BWDCONGBW[/PAR A] = [PARA]BWDCONGCLRBW[/P ARA] = 0. If [PARA]BWADJ[/PARA] is set to be OFF,[PARA]BWDHORSVBW[/ PARA],[PARA]BWDCONGBW [/PARA],[PARA]BWDCONGC LRBW[/PARA] must obey the following rules: [PARA]BWDHORSVBW[/PAR A] < [PARA]BWDCONGBW[/PAR A] < [PARA]BWDCONGCLRBW[/P ARA] < [PARA]CIR[/PARA] or N (No impact on the UE in idle mode) [PARA]BWDHORSVBW[/PAR None Not involved
None
Not involved
[PARA]BWDHORSVBW[/PARA]/[PARA]BWDCONGBW[/PARA]/[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD IPPATH[/MML N (no impact on the UE in connected mode) Not involved
[PARA]BWDHORSVBW[/PARA]/[PARA]BWDCONGBW[/PARA]/[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD RSCGRP[/MM N (No impact on the UE in idle mode) Not involved
None
Not involved
Not involved
If [PARA]BWADJ[/PARA] is set to be ON,[PARA]BWDHORSVBW[/ PARA],[PARA]BWDCONGBW [/PARA],[PARA]BWDCONGC LRBW[/PARA] must obey the following rules: [PARA]BWDHORSVBW[/PAR A] < [PARA]BWDCONGBW[/PAR A] < [PARA]BWDCONGCLRBW[/P ARA] < [PARA]MINBW[/PARA] or [PARA]BWDHORSVBW[/PAR A] = [PARA]BWDCONGBW[/PAR A] = [PARA]BWDCONGCLRBW[/P ARA] = 0. If [PARA]BWADJ[/PARA] is set to be OFF,[PARA]BWDHORSVBW[/ PARA],[PARA]BWDCONGBW [/PARA],[PARA]BWDCONGC LRBW[/PARA] must obey the following rules: [PARA]BWDHORSVBW[/PAR A] < [PARA]BWDCONGBW[/PAR A] < [PARA]BWDCONGCLRBW[/P ARA] < [PARA]CIR[/PARA] or N (No impact on the UE in idle mode) [PARA]BWDHORSVBW[/PAR None Not involved
None
Not involved
[PARA]BWDHORSVBW[/PARA]/[PARA]BWDCONGBW[/PARA]/[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD IPPATH[/MML N (no impact on the UE in connected mode) Not involved
[PARA]BWDHORSVBW[/PARA]/[PARA]BWDCONGBW[/PARA]/[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD RSCGRP[/MM N (No impact on the UE in idle mode) Not involved When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode) Not involved When [PARA]GRPT[/PARA] in [MML]ADD RSCGRP[/MML] is set to IP, this parameter is valid. N (No impact on the UE in idle mode) Not involved When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode) Not involved
None
Not involved
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] AAL2to UNI, IMA, FRAATM, NCOPT, or ATM logic po Y is set Path None Y IP Path
When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is set to FRAATM, the CARRYFRAATMLNK is required. When the value of [PARA]CARRYT[/PARA] is set to FRAATM, this parameter is valid. When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to FRAATM, this parameter is valid. N (No impact on the UE in idle mode) When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is set to IMA, the CARRYIMAGRPN is required. When the value of [PARA]CARRYT[/PARA] is set to IMA, this parameter is valid. When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to IMA, this parameter is valid. N (No impact on the UE in idle mode) None Not involved
Not involved
When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is set to NCORT, the CARRYNCOPTN is required. When the value of [PARA]CARRYT[/PARA] is set to NCOPT, this parameter is valid. When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to NCOPT, this parameter is valid. N (No impact on the UE in idle mode) None Not involved
When the value of [PARA]CARRYT[/PARA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCPORT, this parameter is valid. When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid. Not involved Not involved When the value of [PARA]CARRYT[/PARA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCPORT, this parameter is valid. Not involved Not involved None Not involved Not involved None Not involved Not involved When the value of [PARA]RscMngMode[/PARA] in [MML]ADD NODEB[/MML] of the resource corresponding NodeB is set to EXCLUSIVE, the AAL2PATH must carry on ATMLGCPORT or RSCGRP 1. When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is set to IMA, the bearing IMA group number, bearing VPI, bearing VCI, TX traffic record index, RX traffic record index, and peer type are required. 2. When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is set to UNI, the bearing UNI link number, bearing VPI, bearing VCI, TX traffic record index, RX traffic record index, and peer type are required. 3. When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is set to FRAATM, the bearing FRAATM link number, bearing VPI, bearing VCI, TX traffic record index, RX traffic record index, and peer type are required. 4. When the value of [PARA]CARRYT[/PARA] in Y AAL2 Path [MML]ADD IPOAPVC[/MML]
When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is set to UNI, the CARRYUNILNKN is required. When the value of [PARA]CARRYT[/PARA] is set to UNI, this parameter is valid. When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to UNI, this parameter is valid. N (No impact on the UE in idle mode)
Not involved
When the value of [PARA]CARRYT[/PARA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCPORT,SAAL link Y Services carried on the this parameter is valid.
When the value of [PARA]CARRYT[/PARA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCPORT,SAAL link Y Services carried on the this parameter is valid. When the value of [PARA]CARRYT[/PARA] is set to ATMLGCPORT, this parameter is valid. When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to ATM logic port, this parameter is valid. N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved
Before configuring this parameter,N (No impact on the UE ininformation about the common traffic logical channel by running [MML]ADD CT you need to configure the idle mode) Not involved None N (For the UE in idle mode, if this parameter is changed to ON, and the CBS service is configured correctly,t Not involved This parameter must satisfy the followingimpact on the [PARA]CCCHMBR[/PARA] Not [PARA]CCCHGBR[/PARA]. N (No relationship: UE in idle mode) >= involved This parameter must satisfy the followingimpact on the [PARA]CCCHMBR[/PARA] Not [PARA]CCCHGBR[/PARA]. N (No relationship: UE in idle mode) >= involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved When the value of [PARA]VCLTYPE[/PARA] in [MML]ACT VCLCC[/MML] is set to involvedactivation mode should be set. Not involved Not CC, the None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode) Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode)
None
Not involved
None N (No impact on the UE in idle mode) Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_CENTER N (no impact on the BOTH or mode) Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_CENTER N (no impact on the BOTH or mode)
Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_CENTER N (no impact on the BOTH or mode) Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_CENTER N (no impact on the BOTH or mode)
Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_CENTER N (no impact on the BOTH or mode)
Not involved
Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_CENTER Not involved N (no impact on the BOTH or mode) None N (No impact on the UE in idle mode) Not involved Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode) None N (No impact on the UE in idle mode) Not involved
Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode)
Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode) None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
The value of this parameter is dependent on the value of [PARA]CellId[/PARA] in [MML]ADD SMLCCELL[/MML]. Not involved Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode) None N (no impact on the UE in idle mode) Not involved The value of this parameter must not (Nolarger than [PARA]DlHoCeCodeResvSf[/PARA]involved N be impact on the UE in idle mode) Not in [MML]ADD CELLCAC[/MML]. None N (no impact on the UE in idle mode) Not involved
None The value of this parameter must satisfy the following relationship: [PARA]CellOverrunThd[/PARA ] >= [PARA]CellUnderrunThd[/PAR A]. None
Not involved
N (No impact on the UE in idle mode) N (no impact on the UE in idle mode)
N (no impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None
Not involved
None None The value of this parameter must satisfy the following relationship: [PARA]CellOverrunThd[/PARA ] >= [PARA]CellUnderrunThd[/PAR A].
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
None
Cell
None N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved None Not involved Not involved When the value of [PARA]PATHCHK[/PARA]on services whenIPPATH[/MML] issucceeds) N (no impact in [MML]ADD the Ping detection Notto ENABLED, this parameter is valid. set involved None N (No impact on the UE in idle mode) Not involved
Not involved Y Y Y
Not involved Services that the SCTP link bears Services that the SCTP link bears Services that the SCTP link bears
Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved Not involved
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None
Not involved
None
Not involved
None
Not involved
N (no impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None
Cell
None
Not involved
None
Not involved
None N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to cho Not involved When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to OFF, this parameter should be set. N (No impact on the UE in idle mode) Not involved None Y RNC None Y Cell
None
Not involved
None
Not involved
None None
N (no impact on the UE in idle mode) N (No impact on the UE in idle mode)
None
Not involved
This parameter cannot be set to CS_DOMAIN when the [PARA]TrafficClass[/PARA] parameter is set to INTERACTIVE or BACKGROUND Not involved Not involved
None None None None None None This parameter is valid only when [PARA]CnOpGrpIndex[/PARA] in [MML]ADD CNOPERGROUP[/MML] is added. This paramter is valid only when [PARA]CnOpGrpIndex[/PARA] in [MML]ADD CNOPERGROUP[/MML] is added. None None
Not involved N (No impact on the UE in idle mode) Not involved Not involved N (No impact on the UE in idle mode) Not involved
Not involved Not involved Not involved Not involved Not involved Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved
When [PARA]RSCMNGMODE[/PAR A] in [MML]ADD RSCGRP[/MML] is set to EXCLUSIVE, this parameter is valid. When the value of [PARA]CNMNGMODE[/PARA ] in [MML]ADD ADJMAP[/MML] is set to EXCLUSIVE, the operator index should be set. When the value of [PARA]RSCMNGMODE[/PAR A] in [MML]ADD IPLOGICPORT[/MML] is set to EXCLUSIVE, this parameter must be set. The value of this parameter is dependent on the value of [PARA]CnOpIndex[/PARA] in [MML]ADD SAC[/MML].
Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This paramter is valid only when [PARA]CodeAdjForHsdpaSwitch[/PARA] is set to Not involved N (No impact on the UE in idle mode) ON.
If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command; This parameter is valid only when the [PARA]CodeBalancingDrdSwitc h[/PARA] parameter is set to ON. If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command. This parameter is valid only when the [PARA]CodeBalancingDrdSwitc h[/PARA] parameter is set to ON.
Not involved
If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command; This parameter is valid only when the [PARA]CodeBalancingDrdSwitc h[/PARA] parameter is set to ON. If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command. This parameter is valid only when the [PARA]CodeBalancingDrdSwitc h[/PARA] parameter is set to ON.
Not involved
If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through N (No impact on the UE in idle mode) Not involved This paramter is valid only when INTER_FREQ_HHO_SWITCH mode) [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/M N (No impact on the UE in idle of the Not involved None N (For the UE in idle mode, if this parameter is changed, you need to set the corresponding code scheme so th Not involved
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
This parameter is available if the value ofimpact on the UE in idle mode) in [MML]SET QOSACT[/MML] is YES. N (No [PARA]BEQosPerform[/PARA] Not involved When [PARA]MOCNSupport[/PARA] in [MML]SET OPERATORSHARINGMODE[/MML] is set to YES, CommPlmnUsingType needs to b N (No impact on the UE in idle mode) Not involved When the value of [PARA]SAALLNKT[/PARA] isthe UENNI, this parameter is valid. involved N (No impact on set to in idle mode) Not When the value of [PARA]SAALLNKT[/PARA] isthe UENNI, this parameter is valid. involved N (No impact on set to in idle mode) Not When the value of [PARA]SAALLNKT[/PARA] isthe UENNI, this parameter is valid. involved N (No impact on set to in idle mode) Not The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>con N (No impact on the UE in idle mode) Not involved The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>con N (No impact on the UE in idle mode) Not involved The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>con N (No impact on the UE in idle mode) Not involved The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>con N (No impact on the UE in idle mode) Not involved
1.When the value of [PARA]PORTPROTYPE[/PAR A] in [MML]ADD PORTFLOWCTRLPARA[/MM L] is set to IP, this parameter should be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold. 1.When the value of [PARA]PORTPROTYPE[/PAR A] in [MML]ADD PORTFLOWCTRLPARA[/MM L] is set to IP, this parameter should be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold.
Not involved
N (No impact on the UE in idle mode) Not involved The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>con N (No impact on the UE in idle mode) Not involved The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>con N (No impact on the UE in idle mode) Not involved The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>con N (No impact on the UE in idle mode) Not involved The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>con N (No impact on the UE in idle mode) Not involved
1.When the value of [PARA]PORTPROTYPE[/PAR A] in [MML]ADD PORTFLOWCTRLPARA[/MM L] is set to IP, this parameter should be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold.
Not involved
1.When the value of [PARA]PORTPROTYPE[/PAR A] in [MML]ADD PORTFLOWCTRLPARA[/MM L] is set to IP, this parameter can be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold. None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) to BARRED. involved [PARA]ConnCellBarred[/PARA] is set Not None Not involved Not involved
None
N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved
This parameter is valid only when N(impact on Cell Selection and Reselection of the UE in idle mode) [PARA]QualMeas[/PARA] is set to CPICH_ECNO. involved Not
This parameter is valid when [PARA]SIB12Ind[/PARA] is in idleTRUE. N (No impact on the UE set to mode)
Not involved
This parameter is valid when [PARA]SIB12Ind[/PARA] is in idleTRUE. N (No impact on the UE set to mode) Not involved None N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved None N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) to BARRED. involved [PARA]ConnCellBarred[/PARA] is set Not None N (Impact on random access for UEs in idle mode)Not involved CONTEXTTYPE needs to be set wheninvolved Not [PARA]RSTTYPE[/PARA] in [MML]RST IUR[/MML] is set to SINGLE_RNC; CONTEXTTYPE do Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter must satisfy the followingimpact on the [PARA]CONVMBR[/PARA]Not [PARA]CONVGBR[/PARA]. N (No relationship: UE in idle mode) >= involved This parameter must satisfy the followingimpact on the [PARA]CONVMBR[/PARA]Not [PARA]CONVGBR[/PARA]. N (No relationship: UE in idle mode) >= involved
The following relationship must be satisfied: [PARA]GoldMaxMode[/PARA] >= [PARA]SilverMaxMode[/PARA ] >= [PARA]CopperMaxMode[/PAR A]. The following relationship must be satisfied: [PARA]GoldMaxMode[/PARA] >= [PARA]SilverMaxMode[/PARA ] >= [PARA]CopperMaxMode[/PAR A]. N (no impact on the UE in idle mode)
Not involved
The following relationship must be satisfied: [PARA]GoldMaxMode[/PARA] >= [PARA]SilverMaxMode[/PARA ] >= [PARA]CopperMaxMode[/PAR A]. The following relationship must be satisfied: [PARA]GoldMaxMode[/PARA] >= [PARA]SilverMaxMode[/PARA ] >= [PARA]CopperMaxMode[/PAR A]. N (no impact on the UE in idle mode) Not involved None Not involved Not involved CountCThreshold needs to be set when [PARA]CounterCheckSwitch[/PARA] in [MML]SET CNTCHK[/MML] is set to ON; CountCThreshol N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This paramter is valid only when [PARA]TxDiversityInd[/PARA] is set to TRUE. This parameter is valid only when [PARA]TxDiversityInd[/PARA] is set to TRUE.
Y Cell This parameter is valid when [PARA]DtxInvalid[/PARA] is set to mode) N (No impact on the UE in idle ON. Not involved This parameter is valid when [PARA]DtxInvalid[/PARA] is set to mode) N (No impact on the UE in idle ON. Not involved This parameter is required when the [PARA]UseOfHcs[/PARA] parameter is set to USED but not required when the [PARA]UseOfHcs[/PARA N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR or IUCS, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved
This parameter is valid when [PARA]NcovHoOn2GldInd[/PA RA] in [MML]SET INTERRATHONCOV[/MML] is set to ON. This parameter is valid when [PARA]NcovHoOn2GldInd[/PA RA] is set to ON.
N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved CsInfoUpdTmr needs to be set when (No impact on the UE in idle mode) [MML]SETNot involved N [PARA]CsInfoUpdFlag[/PARA] in IUFLEX[/MML] is set to ON; CsInfoUpdTmr does not n
None N (No impact on the UE in idle mode) Not involved CSNRILength needs to be set when [PARA]CsIuFlexFlag[/PARA] in [MML]SET IUFLEX[/MML] is set to ON; CSNRILength does not need N (No impact on the UE in idle mode) Not involved
When [PARA]DsacAutoSwitch[/PARA] impact on the UE in idle mode) configure;else,need not configure. N (No is set to ON,the parameter need Not involved
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR or IUCS, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved
None
Not involved
Not involved
None Not involved None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None Not involved None Not involved None Not involved This classified zone is not bound to otherimpact on the UE in idle mode) N (no service areas. The following relationship must be satisfied: [PARA]D2F2PTvmThd[/PARA] < [PARA]F2DTvmThd[/PARA]; [PARA]D2F2PTvmThd[/PARA] < [PARA]BeEFach2DTvmThd[/P ARA]. N (no impact on the UE in idle mode) None N (no impact on the UE in idle mode) None N (no impact on the UE in idle mode) None N (no impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved Not involved Not involved
None N (No impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved When [PARA]MOCNSupport[/PARA] in [MML]SET OPERATORSHARINGMODE[/MML] is set to YES, DefaultCnOp optionally needs to N (No impact on the UE in idle mode) Not involved
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This paramter must be configured N (No[PARA]ReHostPolicy[/PARA] is set to REHOSTDELAY. when impact on the UE in idle mode) Not involved On E1 working mode, the parameter [PARA]DELAY[/PARA] and [PARA]DLYGB[/PARA] must obey the following rules: [PARA]DELAY[/PARA]*64*30 /(53*8) > [PARA]DLYGB[/PARA] + 3*2; [PARA]DELAY[/PARA]*64*30 /(53*8) + 3*2 + [PARA]DLYGB[/PARA] < 1024. On T1 working mode, they must obey the following rules: [PARA]DELAY[/PARA]*64*24 /(53*8) > [PARA]DLYGB[/PARA] + 3*2; [PARA]DELAY[/PARA]*64*24 /(53*8) + 3*2 + N (No impact on the UE in idle mode) Not involved [PARA]DLYGB[/PARA] <
None N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) the [PARA]CodeBalancingDrdSwitch[/PARA] parameter is set to ON through the [MML]SET DRD[/MML] Not involved This parameter is required when the [PARA]QrxlevminExtSup[/PAR A] parameter is set to TRUE but not required when the [PARA]QrxlevminExtSup[/PAR A] parameter is set to FALSE. This parameter is valid only when [PARA]QrxlevminExtSup[/PAR A] is set to TRUE. N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved
The [PARA]DENO[/PARA] field Not involved M3DE[/MML] in [MML]ADD None Not involved None Not involved None Not involved None Not involved None N (No impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved Not involved
None
Not involved
None N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved
None N (no impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved None None N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved
If this parameter is set through both the [MML]SETthe UE in idle mode) N (No impact on FRCCHLTYPEPARA[/MML] and [MML]ADD CELLFRC[/MML] commands, the param Not involved This parameter can be used for selection of the initial rate for BE services only when the DCCC_SWITCH under the [PARA]Chswitch[/PARA] N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None
Not involved
None None None The value of this parameter must satisfy the following relationship: [PARA]DlOlcTrigThd[/PARA]( See [MML]ADD CELLLDM[/MML]) >= [PARA]DlCellTotalThd[/PARA] ; [PARA]DlCellTotalThd[/PARA] >= [PARA]DlHOThd[/PARA] .
N (no impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
None The value of this parameter must satisfy the following relationship: [PARA]DLOVSFSF[/PARA]>= [PARA]DLCODENO[/PARA]. .
Not involved
Not involved
The value of this parameter must satisfy the following relationship: [PARA]DlHOThd[/PARA] > [PARA]DlConvAMRThd[/PAR A]; [PARA]DlConvAMRThd[/PAR A] > [PARA]DlOtherThd[/PARA] .
Not involved
The value of this parameter must satisfy the following relationship: [PARA]DlHOThd[/PARA] > [PARA]DlConvNonAMRThd[/P ARA]; [PARA]DlConvNonAMRThd[/P ARA] > [PARA]DlOtherThd[/PARA] .
Not involved
None
Not involved
None N (No impact on the UE in idle mode) When the value of DlMidRateCalc is HAND_APPOINT,the following relationship must be satisfied: [PARA]DlDcccRateThd[/PARA ] <= [PARA]DlMidRateThd[/PARA]. N (no impact on the UE in idle mode)
Not involved
Not involved
This parameter is available if the value of [PARA]BEQosPerform[/PARA] in [MML]SET QOSACT[/MML] is YES. To configure this parameter, you must take into consideration the actual full-coverage rate of a certain cell. Otherwise, the QoS would be affected.
Not involved
For the BE users with the same [PARA]TrafficClass[/PARA], [PARA]THPClass[/PARA] and [PARA]BearType[/PARA] values, make sure: [PARA]UlGBR[/PARA] of GOLD users ([PARA]UserPriority[/PARA] is set to GOLD) >= [PARA]UlGBR[/PARA] of SILVER users ([PARA]UserPriority[/PARA] is set to SILVER) >= [PARA]UlGBR[/PARA] of COPPER users ([PARA]UserPriority[/PARA] is set to COPPER). N (No impact on the UE in idle mode) The value of this parameter must satisfy the following relationship: [PARA]DlHoCeCodeResvSf[/P ARA] >= [PARA]DlLdrCreditSfResThd[/ PARA]; [PARA]DlHoCeCodeResvSf[/P ARA] >= [PARA]CellLdrSfResThd[/PAR A] .
Not involved
Not involved
The value of this parameter must satisfy the following relationship: [PARA]DlCellTotalThd[/PARA] >= [PARA]DlHOThd[/PARA] ; [PARA]DlHOThd[/PARA] > [PARA]DlConvAMRThd[/PAR A]; [PARA]DlHOThd[/PARA] > [PARA]DlConvNonAMRThd[/P ARA] .
N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None
Not involved
The value of this parameter must not (Nolarger than [PARA]DlHoCeCodeResvSf[/PARA]involved N be impact on the UE in idle mode) Not in [MML]ADD CELLCAC[/MML]. None N (No impact on the UE in idle mode) Not involved
None
Not involved
None
Not involved
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None The value of this parameter must satisfy the following relationship: [PARA]DlLdrTrigThd[/PARA] >= [PARA]DlLdrRelThd[/PARA]; [PARA]DlOlcRelThd[/PARA] >= [PARA]DlLdrRelThd[/PARA].
Not involved
Not involved
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None
Not involved
The value of this parameter must satisfy the following relationship: [PARA]DlLdrTrigThd[/PARA] >= [PARA]DlLdrRelThd[/PARA]; [PARA]DlOlcTrigThd[/PARA] > [PARA]DlLdrTrigThd[/PARA]; [PARA]DlOtherThd[/PARA](Se e [MML]ADD CELLCAC[/MML]) >= [PARA]DlLdrTrigThd[/PARA]. N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode)
None N (no impact on the UE in idle mode) Not involved This parameter is valid when the [PARA]DlRateUpAdjLevel[/PARA] in [MML]SETNot involved is set to 3_Rates, or when [PARA]DlRate N (no impact on the UE in idle mode) DCCC[/MML] This parameter is valid when the [PARA]DlMidRateCalc[/PARA] in [MML]SET DCCC[/MML] is set to HAND_APPOINT, and the following relationship must be satisfied: [PARA]DlDcccRateThd[/PARA ] <= [PARA]DlMidRateThd[/PARA].
N (no impact on the UE in idle mode) The following relationship must be satisfied: [PARA]UlModeChangeTimerLe n[/PARA] <= [PARA]DlModeChangeTimerLe n[/PARA]. N (no impact on the UE in idle mode)
Not involved
Not involved
This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved None N (No impact on the UE in idle mode) Not involved
None
Not involved
None None The value of this parameter must satisfy the following relationship: [PARA]DlOlcTrigThd[/PARA] >= [PARA]DlOlcRelThd[/PARA]; [PARA]DlOlcRelThd[/PARA] >= [PARA]DlLdrRelThd[/PARA].
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
The value of this parameter must satisfy the following relationship: [PARA]DlOlcTrigThd[/PARA] >= [PARA]DlOlcRelThd[/PARA]; [PARA]DlOlcTrigThd[/PARA] > [PARA]DlLdrTrigThd[/PARA]; [PARA]DlOlcTrigThd[/PARA] >= [PARA]DlCellTotalThd[/PARA] . N (No impact on the UE in idle mode)
Not involved
The value of this parameter must satisfy the following relationship: [PARA]DlConvAMRThd[/PAR A] > [PARA]DlOtherThd[/PARA]; [PARA]DlConvNonAMRThd[/P ARA] > [PARA]DlOtherThd[/PARA]; [PARA]DlOtherThd[/PARA] >= [PARA]DlLdrTrigThd[/PARA]( See [MML]ADD CELLLDM[/MML]).
N (No impact on the UE in idle mode) The value of this parameter must satisfy the following relationship: [PARA]DLOVSFSF[/PARA]>= [PARA]DLCODENO[/PARA]. .
Not involved
Not involved
None
Not involved
None N (No impact on the UE in idle mode) Valid when [PARA]AMRQosPerform[/PARA] is set to YES idle mode) N (no impact on the UE in Valid when [PARA]AMRQosPerform[/PARA] is set to YES idle mode) N (no impact on the UE in Valid when [PARA]AMRQosPerform[/PARA] is set to YES idle mode) N (no impact on the UE in
None N (No impact on the UE in idle mode) Valid when [PARA]VPQosPerform[/PARA] is set theYES in idle mode) N (no impact on to UE Valid when [PARA]AMRQosPerform[/PARA] is set to YES idle mode) N (no impact on the UE in Valid when [PARA]AMRQosPerform[/PARA] is set to YES idle mode) N (no impact on the UE in Valid when [PARA]AMRQosPerform[/PARA] is set to YES idle mode) N (no impact on the UE in None N (No impact on the UE in idle mode) None N (no impact on the UE in idle mode) None N (no impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to NOPRIORITY. involved Not This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved None N (No impact on the UE in idle mode) Not involved The following relationship must be satisfied: [PARA]DlThdE1[/PARA] <= [PARA]DlThdE2[/PARA] < [PARA]DlThdF2[/PARA] <= [PARA]DlThdF1[/PARA]. N (no impact on the UE in idle mode) Not involved The following relationship must be satisfied: [PARA]DlThdE1[/PARA] <= [PARA]DlThdE2[/PARA] < [PARA]DlThdF2[/PARA] <= [PARA]DlThdF1[/PARA]. N (no impact on the UE in idle mode) Not involved The following relationship must be satisfied: [PARA]DlThdE1[/PARA] <= [PARA]DlThdE2[/PARA] < [PARA]DlThdF2[/PARA] <= [PARA]DlThdF1[/PARA]. N (no impact on the UE in idle mode) Not involved
The following relationship must be satisfied: [PARA]DlThdE1[/PARA] <= [PARA]DlThdE2[/PARA] < [PARA]DlThdF2[/PARA] <= [PARA]DlThdF1[/PARA]. N (no impact on the UE in idle mode) None N (No impact on the UE in idle mode)
None N (no impact on the UE in idle mode) 1.When the value of [PARA]BT[/PARA] in [MML]ADD IMAGRP[/MML] is selected, this parameter is valid. 2.On E1 working mode, the parameter [PARA]DELAY[/PARA] and [PARA]DLYGB[/PARA] must obey the following rules: [PARA]DELAY[/PARA]*64*30 /(53*8) > [PARA]DLYGB[/PARA] + 3*2; [PARA]DELAY[/PARA]*64*30 /(53*8) + 3*2 + [PARA]DLYGB[/PARA] < 1024. On T1 working mode, they must obey the following rules: [PARA]DELAY[/PARA]*64*24 /(53*8) > [PARA]DLYGB[/PARA] + 3*2; [PARA]DELAY[/PARA]*64*24 N (No impact on the UE in idle mode) /(53*8) + 3*2 + None N (No impact on the UE in idle mode) None Not involved When the value of [PARA]SPDF[/PARA] is set to WNF, this parameter is valid. Y This parameter is valid when [PARA]DtxInvalid[/PARA] is set to mode) N (No impact on the UE in idle ON. This parameter is valid when [PARA]DtxInvalid[/PARA] is set to mode) N (No impact on the UE in idle ON. None N (No impact on the UE in idle mode) When the value of [PARA]SPDF[/PARA] is set to DNF, this parameter is valid. Y
Not involved
Not involved Not involved Not involved RNC Not involved Not involved Not involved RNC
Cell
This paramter is valid only when [PARA]TxDiversityInd[/PARA] is set to TRUE. This parameter is valid only when [PARA]TxDiversityInd[/PARA] is set to TRUE.
Cell
None
Not involved
None Not involved Not involved None Not involved Not involved None Not involved Not involved The [PARA]DPX[/PARA] field in [MML]ADD N7DPC[/MML] The parameter [PARA]DPX[/PARA] in [MML]ADD N7DPC[/MML] When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to IUR, IUCS, or NNI_AAL2SWITCH, or the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to IUPS and [PARA]SGSNFLG[/PARA] in [MML]ADD Not involved Not involved ADJNODE[/MML] is set to When the value of [PARA]VCLTYPE[/PARA] in [MML]ACT VCLCC[/MML] is set to involvedactivation direction should be set. Not involved Not CC, the
DRA_BE_RATE_DOWN_BF_ HO_SWITCH,DRA_THROU_D CCC_SWITCH,DRA_BE_EDC H_TTI_RECFG_SWITCH and DRA_HSUPA_DCCC_SWITC H are valid when DRA_DCCC_SWITCH is set to ON; For BE service,DRA_HSDPA_STATE_ TRANS_SWITCH and DRA_HSUPA_STATE_TRANS _SWITCH are valid when DRA_PS_BE_STATE_TRANS_ SWITCH is set to ON; For RT service,DRA_HSDPA_STATE_ TRANS_SWITCH and DRA_HSUPA_STATE_TRANS _SWITCH are valid when DRA_PS_NON_BE_STATE_T RANS_SWITCH is set to ON;
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through N (No impact on the UE in idle mode) Not involved Valid when [PARA]BEQosPerform[/PARA] is set theYES in idle mode) N (no impact on to UE Not involved
The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>con N (No impact on the UE in idle mode) Not involved The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>con N (No impact on the UE in idle mode) Not involved The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>con N (No impact on the UE in idle mode) Not involved The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>con N (No impact on the UE in idle mode) Not involved 1.When the value of [PARA]PORTPROTYPE[/PAR A] in [MML]ADD PORTFLOWCTRLPARA[/MM L] is set to IP, this parameter can be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold. 1.When the value of [PARA]PORTPROTYPE[/PAR A] in [MML]ADD PORTFLOWCTRLPARA[/MM L] is set to IP, this parameter can be set. 2.The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold.
Not involved
Not involved
None
Not involved
This parameter is valid when [PARA]DtxInvalid[/PARA] is set to mode) N (No impact on the UE in idle ON.
Not involved
None N (No impact on the UE in idle mode) Not involved DRXCycleLenCoef needs to be set only when [PARA]CNDomainId[/PARA] in [MML]ADD to PCHs) N (For the UE in idle mode, affecting its period of listening CNDOMAIN[/MML] is set to CS_DOMAIN or Not involved This parameter is valid when [PARA]DtxInvalid[/PARA] is set to mode) N (No impact on the UE in idle ON. Not involved This parameter is valid when [PARA]DtxInvalid[/PARA] is set to mode) N (No impact on the UE in idle ON. Not involved
None None
The destination IP address must not be the broadcast address or the multicast address. The parameter must not be the same as any IP address that has been configured in the RNC. The parameter must not be the same as the internal/external IP address of the BAM.
Not involved Not involved None Not involved Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved This parameter is valid when [PARA]DtxInvalid[/PARA] is set to mode) N (No impact on the UE in idle ON. Not involved This parameter is valid when [PARA]DtxInvalid[/PARA] is set to mode) N (No impact on the UE in idle ON. Not involved None N (No impact on the UE in idle mode) Not involved This parameter is valid when [PARA]DtxInvalid[/PARA] is set to mode) N (No impact on the UE in idle ON. Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]BRDTYPE[/PARA] is set to FG2a, themode) of [PARA]PTYPE[/PARA] is set to FE, [PARA]AUTO[/PARA] in [M N (No impact on the UE in idle value Port This paramter is valid only when [PARA]DynCellShutDownSwitch[/PARA] is set to Not involved N (No impact on the UE in idle mode) ON. This paramter is valid only when [PARA]DynCellShutDownSwitch[/PARA] is set to Not involved N (No impact on the UE in idle mode) ON. None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This paramter is valid only when [PARA]DynShutdownSwitch[/PARA] is set to ON_1 orinvolved ON_3. N (No impact on the UE in idle mode) Not ON_2 or None N (No impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]PATHCHK[/PARA]on services whenIPPATH[/MML] issucceeds) N (no impact in [MML]ADD the Ping detection Notto ENABLED, this parameter is valid. set involved None N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved
If this parameter is set through both the [MML]SET FRC[/MML] and [MML]ADD CELLFRC[/MML] commands, the parameter set through the [MML]ADD CELLFRC[/MML] command takes precedence over that set through the [MML]SET FRC[/MML] command. If this parameter is set through both the [MML]SET FRCCHLTYPEPARA[/MML] and [MML]ADD CELLFRC[/MML] commands, the parameter set through the [MML]ADD CELLFRC[/MML] command takes precedence over that set through the [MML]SET FRCCHLTYPEPARA[/MML] command. N (No impact on the UE in idle mode)
Not involved
None None
N (no impact on the UE in idle mode) N (no impact on the UE in idle mode)
If this parameter is set through both the [MML]SET FRC[/MML] and [MML]ADD CELLFRC[/MML] commands, the parameter set through the [MML]ADD CELLFRC[/MML] command takes precedence over that set through the [MML]SET FRC[/MML] command. If this parameter is set through both the [MML]SET FRCCHLTYPEPARA[/MML] and [MML]ADD CELLFRC[/MML] commands, the parameter set through the [MML]ADD CELLFRC[/MML] command takes precedence over that set through the [MML]SET FRCCHLTYPEPARA[/MML] command. N (No impact on the UE in idle mode)
Not involved
When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]EM[/PARA] in [MML]SET TZ[/M Y RNC This parameter is associated with the(No impact on[PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMa N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMa N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMa N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMa N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMa N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMa N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMa N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMa N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMa N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMa N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMa N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMa N setting of the the UE in idle mode) Not involved This parameter is required when the [PARA]TrchType[/PARA] parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS but not requir N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None N (no impact on the UE in idle mode) Not involved This parameter is required when the [PARA]TrchType[/PARA] parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS. N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]TrchType[/PARA] parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS. This parameter is must larger than [PARA]EdchTargetLittleRetrans Num[/PARA]. N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]TrchType[/PARA] parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS. This parameter is must less than [PARA]EdchTargetLargeRetrans Num[/PARA]. N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES, the end type should be set. Y RNC None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (no impact on the UE in idle mode) Not involved
When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]EM[/PARA] in [MML]SET TZ[/M Y RNC None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This paramter is valid only when [PARA]DynShutdownSwitch[/PARA] is set to ON_1 orinvolved ON_3. N (No impact on the UE in idle mode) Not ON_2 or This paramter is valid only when [PARA]DynShutdownSwitch[/PARA] is set to ON_2 orinvolved N (No impact on the UE in idle mode) Not ON_3. This paramter is valid only when [PARA]DynShutdownSwitch[/PARA] is set to ON_3. involved N (No impact on the UE in idle mode) Not Negotiation with the peer network Not involved element is required. None Not involved None Not involved None Not involved None Not involved None Not involved None Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES, the end time should be set. Y RNC The value of this parameter must be larger than the value ofin idle mode) N (No impact on the UE the [PARA]Event4bThd[/PARA] parameter. Not involved The value of this parameter must be smaller thanon the UE of the [PARA]Event4aThd[/PARA] parameter. N (No impact the value in idle mode) Not involved This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is se N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is se N (No impact on the UE in idle mode) Not involved
This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is se N (No impact on the UE in idle mode) Not involved When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]EM[/PARA] in [MML]SET TZ[/M Y RNC When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]EM[/PARA] in [MML]SET TZ[/M Y RNC None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved None Not involved Not involved This parameter is consistent with [PARA]TrchId[/PARA] in [MML]ADD FACH[/MML], [MML]ADD FACHDYNTFS[/MML], and [MML]A Not involved Not involved
None Not involved Not involved This parameter is required when the [PARA]InterFreqInterRatMeasInd[/PARA] parameter is set to INTER_FREQ, INTER_RAT or INTER_FR N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (no impact on the UE in idle mode) Not involved When the value of [PARA]BRDTYPE[/PARA] is set to FG2a, themode) of [PARA]PTYPE[/PARA] is set to FE, [PARA]AUTO[/PARA] in [M N (No impact on the UE in idle value Not involved
When the value of [PARA]FLOWCTRLSWITCH[/ PARA] in [MML]SET OPT[/MML] is set to ON, the flow control parameter index should be set. When the value of [PARA]FLOWCTRLSWITCH[/ PARA] is set to ON in [MML]SET ETHPORT[/MML], the FCINDEX should be set. 1.When the value of [PARA]FLOWCTRLSWITCH[/ PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. 2.The type of the flow control parameter index must be IP.
Not involved
None None
Cell
This paramter is valid only when [PARA]TxDiversityInd[/PARA] is set to TRUE. Cell Y None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]USEFE[/PARA] in [MML]ADD NODEBESN[/MML] is Notto Enable, this parameter should be set. N (No impact on the UE in idle mode) set involved
None None
None
Not involved
None N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]IsFixedMachsWinSize[/PARA] parameter isinvolved N (No impact on the UE in idle mode) Not set to TRUE. None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]FRALNKT[/PARA] in [MML]ADD FRALNK[/MML] is set to ON, this parameter is valid and the flow control parameter index can be set. When the value of [PARA]BT[/PARA] in [MML]SET OPT[/MML] is set to UOIa and the value of [PARA]LGCAPPTYPE[/PARA] is set to ATM, the flow control switch should be set. When the value of [PARA]FLOWCTRLSWITCH[/ PARA] in [MML]ADD IMAGRP[/MML] is set to ON, this parameter is valid and the flow control parameter index should be set. N (No impact on the UE in idle mode) Not involved none Not involved Not involved None Not involved Not involved None Not involved This parameter cannot be modified. None N (no impact on the UE in idle mode) Not involved [PARA]FPMUXSWITCH[/PARA] in [MML]ADD IPPATH[/MML] can be set YESNot involved adjnode type is IUB. N (no impact on the UE in connected mode and the UE in idle mode) only when the When the value of [PARA]FPMUXSWITCH[/PARA] UE[MML]ADD IPPATH[/MML] is set tomode) this parameter is valid. N (no impact on the in in connected mode and theNot involved UE in idle YES, None N (No impact on the UE in idle mode) Not involved None Not involved Not involved 1. When the value of [PARA]FRALNKT[/PARA] in [MML]ADD FRALNK[/MML] is set to FRAATM, the flow control switch and the flow control parameter index are required. 2. When the value of [PARA]FRALNKT[/PARA] in [MML]ADD FRALNK[/MML] is set to FRAIMA, the IMA group number is required.
N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved The factor table index is configured by setting the valueUE [PARA]FTI[/PARA] in [MML]ADD FACTORTABLE[/MML]. N (No impact on the of in idle mode) Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved
If [PARA]BWADJ[/PARA] is set to be ON,[PARA]FWDHORSVBW[/ PARA],[PARA]FWDCONGBW [/PARA],[PARA]FWDCONGC LRBW[/PARA] must obey the following rules: [PARA]FWDHORSVBW[/PAR A] < [PARA]FWDCONGBW[/PARA ]< [PARA]FWDCONGCLRBW[/P ARA] < [PARA]MINBW[/PARA] or [PARA]FWDHORSVBW[/PAR A] = [PARA]FWDCONGBW[/PARA ] = [PARA]FWDCONGCLRBW[/P ARA] = 0. If [PARA]BWADJ[/PARA] is set to be OFF,[PARA]FWDHORSVBW[/ PARA],[PARA]FWDCONGBW [/PARA],[PARA]FWDCONGC LRBW[/PARA] must obey the following rules: [PARA]FWDHORSVBW[/PAR A] < [PARA]FWDCONGBW[/PARA ]< [PARA]FWDCONGCLRBW[/P ARA] < [PARA]CIR[/PARA] or Not involved [PARA]FWDHORSVBW[/PAR None Not involved
None
Not involved
[PARA]FWDHORSVBW[/PARA]/[PARA]FWDCONGBW[/PARA]/[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD IPPATH[/MML] N (no impact on the UE in connected mode) Not involved
[PARA]FWDHORSVBW[/PARA]/[PARA]FWDCONGBW[/PARA]/[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD RSCGRP[/MML N (No impact on the UE in idle mode) Not involved
None
Not involved
Not involved
If [PARA]BWADJ[/PARA] is set to be ON,[PARA]FWDHORSVBW[/ PARA],[PARA]FWDCONGBW [/PARA],[PARA]FWDCONGC LRBW[/PARA] must obey the following rules: [PARA]FWDHORSVBW[/PAR A] < [PARA]FWDCONGBW[/PARA ]< [PARA]FWDCONGCLRBW[/P ARA] < [PARA]MINBW[/PARA] or [PARA]FWDHORSVBW[/PAR A] = [PARA]FWDCONGBW[/PARA ] = [PARA]FWDCONGCLRBW[/P ARA] = 0. If [PARA]BWADJ[/PARA] is set to be OFF,[PARA]FWDHORSVBW[/ PARA],[PARA]FWDCONGBW [/PARA],[PARA]FWDCONGC LRBW[/PARA] must obey the following rules: [PARA]FWDHORSVBW[/PAR A] < [PARA]FWDCONGBW[/PARA ]< [PARA]FWDCONGCLRBW[/P ARA] < [PARA]CIR[/PARA] or N (No impact on the UE in idle mode) [PARA]FWDHORSVBW[/PAR None Not involved
None
Not involved
[PARA]FWDHORSVBW[/PARA]/[PARA]FWDCONGBW[/PARA]/[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD IPPATH[/MML] N (no impact on the UE in connected mode) Not involved
[PARA]FWDHORSVBW[/PARA]/[PARA]FWDCONGBW[/PARA]/[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD RSCGRP[/MML N (No impact on the UE in idle mode) Not involved If [PARA]BWADJ[/PARA] is set to be ON,[PARA]FWDHORSVBW[/ PARA],[PARA]FWDCONGBW [/PARA],[PARA]FWDCONGC LRBW[/PARA] must obey the following rules: [PARA]FWDHORSVBW[/PAR A] < [PARA]FWDCONGBW[/PARA ]< [PARA]FWDCONGCLRBW[/P ARA] < [PARA]MINBW[/PARA] or [PARA]FWDHORSVBW[/PAR A] = [PARA]FWDCONGBW[/PARA ] = [PARA]FWDCONGCLRBW[/P ARA] = 0. If [PARA]BWADJ[/PARA] is set to be OFF,[PARA]FWDHORSVBW[/ PARA],[PARA]FWDCONGBW [/PARA],[PARA]FWDCONGC LRBW[/PARA] must obey the following rules: [PARA]FWDHORSVBW[/PAR A] < [PARA]FWDCONGBW[/PARA ]< [PARA]FWDCONGCLRBW[/P ARA] < [PARA]CIR[/PARA] or Not involved Not involved [PARA]FWDHORSVBW[/PAR
None
Not involved
Not involved
None
Not involved
[PARA]FWDHORSVBW[/PARA]/[PARA]FWDCONGBW[/PARA]/[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD IPPATH[/MML] N (no impact on the UE in connected mode) Not involved
[PARA]FWDHORSVBW[/PARA]/[PARA]FWDCONGBW[/PARA]/[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD RSCGRP[/MML N (No impact on the UE in idle mode) Not involved Either [PARA]GainFactorBetaC[/PARA] or [PARA]GainFactorBetaD[/PARA] should be set to 15. Not involved Not involved Either [PARA]GainFactorBetaC[/PARA] or [PARA]GainFactorBetaD[/PARA] should be set to 15. Not involved Not involved [MMLWhen the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is involved Not involved Not set to SBFD or ARP, the gateway IP address should be None N (no impact on the UE in idle mode) Not involved When the value of [PARA]GCDF[/PARA] in [MML]ADD GPS[/MML] is selected as DEG, LATITUDE and LONGTITUDE should be set; When the value of [PARA]GCDF[/PARA] in [MML]ADD GPS[/MML] is selected as SEC, LATITUDESEC and LONGITUDESEC should be set. Not involved None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode)
The following relationship must be satisfied: [PARA]GoldMaxMode[/PARA] >= [PARA]SilverMaxMode[/PARA ] >= [PARA]CopperMaxMode[/PAR A]. The following relationship must be satisfied: [PARA]GoldMaxMode[/PARA] >= [PARA]SilverMaxMode[/PARA ] >= [PARA]CopperMaxMode[/PAR A]. N (no impact on the UE in idle mode) The following relationship must be satisfied: [PARA]GoldMaxMode[/PARA] >= [PARA]SilverMaxMode[/PARA ] >= [PARA]CopperMaxMode[/PAR A]. The following relationship must be satisfied: [PARA]GoldMaxMode[/PARA] >= [PARA]SilverMaxMode[/PARA ] >= [PARA]CopperMaxMode[/PAR A]. N (no impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None Not involved None Not involved
Not involved
Not involved Not involved Not involved Not involved Not involved
This paramter is valid only when [PARA]CellChoice[/PARA]idle mode) N (No impact on the UE in is set to GSMCELL. Not involved None N (No impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]TrchType[/PARA] parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS but not requir N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None
Not involved
Not involved
None This parameter is valid only when [PARA]UseOfHcs[/PARA] is set to USED. This paramter is valid only when [PARA]UseOfHcs[/PARA] is set to USED. This parameter is valid only when [PARA]UseOfHcs[/PARA] is set to TRUE. None
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved When the value of [PARA]HCARRYT[/PARA] in [MML]ADD VPCLCX[/MML] is set involved Not involved Not to FRAATM, this parameter should be set.
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]HCARRYT[/PARA] in [MML]ADD VPCLCX[/MML] is set involved this parameter should be set. Not involved Not to IMA, None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None
Not involved
None
Not involved
None
Not involved
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]HCARRYT[/PARA] in [MML]ADD VPCLCX[/MML] is set involved this parameter should be set. Not involved Not to NCOPT, This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved None N (No impact on the UE in idle mode) Not involved
None N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved None N (No impact on the UE in idle mode) Not involved
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved This paramter is valid only when [PARA]DynShutDownType[/PARA] is set to ConditionalShutDown. N (No impact on the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]HsdschMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]Hsdsc N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]HsdschMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]Hsdsc N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]HsdschMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]Hsdsc N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]HsdschMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]Hsdsc N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]HsdschMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]Hsdsc N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]HsdschMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]Hsdsc N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]HsdschMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]Hsdsc N setting of the the UE in idle mode) Not involved This parameter is associated with the(No impact on[PARA]HsdschMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]Hsdsc N setting of the the UE in idle mode) Not involved This parameter is required when the [PARA]TrchType[/PARA] parameter is set to TRCH_HSDSCH but not required when the [PARA]TrchTy N (No impact on the UE in idle mode) Not involved None Not involved Not involved
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter is listed when the value ofimpact on the UE in idle mode) D2, D3, orNot involved N (No [PARA]TbNum[/PARA] is D1, D4. This parameter is listed when the value ofimpact on the UE in idle mode) D3, or D4.Not involved N (No [PARA]TbNum[/PARA] is D2, 1.This parameter is listed when theN (No impact on the UE in idle mode)D3 or D4. Not involved value of [PARA]TbNum[/PARA] is 1.This parameter is listed when theN (No impact on the UE in idle mode)D4. value of [PARA]TbNum[/PARA] is Not involved This paramter is valid only when [PARA]AllocCodeMode[/PARA] is set to Manual. Not involved N (No impact on the UE in idle mode) This paramter is valid only when [PARA]AllocCodeMode[/PARA ] is set to Automatic and the value of this parameter must satisfy the following relationship: [PARA]HsPdschMaxCodeNum[/ PARA] >= [PARA]HsPdschMinCodeNum[/ PARA]. N (No impact on the UE in idle mode) This paramter is valid only when [PARA]AllocCodeMode[/PARA ] is set to Automatic and the value of this parameter must satisfy the following relationship: [PARA]HsPdschMaxCodeNum[/ PARA] >= [PARA]HsPdschMinCodeNum[/ PARA]. None This paramter is valid only when [PARA]TxDiversityInd[/PARA] is set to TRUE. This parameter is valid only when [PARA]TxDiversityInd[/PARA] is set to TRUE. None None None N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved
Y Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD,SILVER, or COPPER. Not involved None N (no impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved This parameter is available if DRA_DCCC_SWITCH and DRA_HSUPA_DCCC_SWITCH are set to ON in [MML]SET CORRMALGOSWIT N (no impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter can be used for selection of the initial rate for HSUPA BE services only when the DCCC_SWITCH under the [PARA]Chswitch N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved None Not involved Not involved
The value of this parameter must satisfy the following relationship: [PARA]HsupAuRetrnsLdTrigTh d[/PARA] >= [PARA]HsupAuRetrnsLdRelTh d[/PARA]. The value of this parameter must satisfy the following relationship: [PARA]HsupAuRetrnsLdTrigTh d[/PARA] >= [PARA]HsupAuRetrnsLdRelTh d[/PARA].
Not involved
N (No impact on the UE in idle mode) Not involved This paramter is valid only when [PARA]DynShutDownType[/PARA] is set to ConditionalShutDown. N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]HCARRYT[/PARA] in [MML]ADD VPCLCX[/MML] is set involvedthis parameter should be set. Not involved Not to UNI,
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]CXT[/PARA] in [MML]ADD VPCLCX[/MML] is set to Not involved parameter should be set. Not involved VCLCX, this None Not involved Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
This parameter is valid when [PARA]InterFreqReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode) Not involved
None
Not involved
None
Not involved
None
Not involved
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode) Not involved
None
Not involved
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to PERIODICAL_REPORTING. N (No impact on the UE in idle mode) Not involved
This parameter is valid when [PARA]InterFreqReportMode[/PARA] is set to PERIODICAL_REPORTING. N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]PATHCHK[/PARA]on services whenIPPATH[/MML] issucceeds) N (no impact in [MML]ADD the Ping detection Notto ENABLED, this parameter is valid. set involved
None Not involved Not involved None N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) to BARRED. involved [PARA]IdleCellBarred[/PARA] is set Not
None
N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved
This parameter is valid only when N(impact on Cell Selection and Reselection of the UE in idle mode) [PARA]QualMeas[/PARA] is set to CPICH_ECNO. involved Not
This parameter is valid when [PARA]SIB11Ind[/PARA] is setthe TRUE.the value of this parameter is, the lower the possibility for the UE to cho N(For the UE in idle mode, to larger Not involved
This parameter is valid when [PARA]SIB11Ind[/PARA] is setthe TRUE.the value of this parameter is, the lower the possibility for the UE to cho N(For the UE in idle mode, to larger Not involved None N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved None N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) to BARRED. involved [PARA]IdleCellBarred[/PARA] is set Not None None None N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved Not involved
None None
For AEUa, the sum of UNI/IMA/FRA can not exceed 32,for AOUa, the sum of UNI/IMA/FRA on an optical port can not exceed 63(E1)/84(T1) When the value of [PARA]PFMT[/PARA] in [MML]RST PFMM[/MML] is set to IMALNK, the value of IMALNKN can be set. None
None
Not involved
None N (No impact on the UE in idle mode) Not involved This parameter must satisfy the followingimpact on the [PARA]IMSMBR[/PARA] >= [PARA]IMSGBR[/PARA]. N (No relationship: UE in idle mode) Not involved None Not involved Not involved The parameter must be greater than or equal to [PARA]ImsiMin[/PARA] in [MML]ADDinvolved Not involved Not IMSISNAMAP[/MML]. The parameter must be less than or equal to [PARA]ImsiMax[/PARA] in [MML]ADD IMSISNAMAP[/MML]. Not involved Not involved
This parameter is required when the [PARA]ImsBearEnhancedSwitch[/PARA] parameterinvolved ON. N (No impact on the UE in idle mode) Not is set to This parameter must be less than or equal to [PARA]ImsiRtMax[/PARA] in [MML]ADDinvolved Not involved Not IMSIIDNNSCNIDMAP[/MML]. This parameter must be greater than or involved [PARA]ImsiRtMin[/PARA] in [MML]ADD IMSIIDNNSCNIDMAP[/MML]. Not equal to Not involved This parameter must satisfy the followingimpact on the [PARA]IMSMBR[/PARA] >= [PARA]IMSGBR[/PARA]. N (No relationship: UE in idle mode) Not involved This parameter is valid when [PARA]DtxInvalid[/PARA] is set to mode) N (No impact on the UE in idle ON. Not involved This parameter is valid when [PARA]DtxInvalid[/PARA] is set to mode) N (No impact on the UE in idle ON. Not involved This parameter is valid when [PARA]DtxInvalid[/PARA] is set to mode) N (No impact on the UE in idle ON. Not involved None Not involved Not involved When the value of [PARA]INHT[/PARA] in [MML]INH BRD[/MML] is set to LOGIC,the value range of [PARA]SN[/PARA] is 0, 2, 4, 8 to 2 Y RNC When the value of [PARA]SAALLNKT[/PARA] isthe UENNI, this parameter is valid. involved N (No impact on set to in idle mode) Not None N (No impact on the UE in idle mode) Not involved This parameter must satisfy the followingimpact on the [PARA]INTERACTMBR[/PARA] >= [PARA]INTERACTGBR[/PARA]. N (No relationship: UE in idle mode) Not involved This parameter must satisfy the followingimpact on the [PARA]INTERACTMBR[/PARA] >= [PARA]INTERACTGBR[/PARA]. N (No relationship: UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None
Not involved
The value of this parameter must be smaller thanon the UE in idle mode) N (No impact [PARA]InterFreqCsThd2FEcN0[/PARA]. Not involved
The value of this parameter must be smaller thanon the UE in idle mode) N (No impact [PARA]InterFreqCsThd2FRscp[/PARA]. Not involved
The value of this parameter must be larger than [PARA]InterFreqCsThd2DEcN0[/PARA]. N (No impact on the UE in idle mode) Not involved
The value of this parameter must be larger than [PARA]InterFreqCsThd2DRscp[/PARA].involved N (No impact on the UE in idle mode) Not None N (No impact on the UE in idle mode) Not involved
None
Not involved
None
Not involved
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved None N (No impact on the UE in idle mode) Not involved
None
Not involved
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None
Not involved
The value of this parameter must be smaller thanon the UE in idle mode) N (No impact [PARA]InterFreqR99PsThd2FEcN0[/PARA]. Not involved
The value of this parameter must be smaller thanon the UE in idle mode) N (No impact [PARA]InterFreqR99PsThd2FRscp[/PARA]. Not involved
The value of this parameter must be larger than [PARA]InterFreqR99PsThd2DEcN0[/PARA]. N (No impact on the UE in idle mode) Not involved
The value of this parameter must be larger than [PARA]InterFreqR99PsThd2DRscp[/PARA]. N (No impact on the UE in idle mode) Not involved
None
Not involved
None N (No impact on the UE in idle mode) Not involved None N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode) Not involved
The value of this parameter must be smaller thanon the UE in idle mode) N (No impact [PARA]InterRatCsThd2FEcN0[/PARA]. Not involved
The value of this parameter must be smaller thanon the UE in idle mode) N (No impact [PARA]InterRatCsThd2FRscp[/PARA].involved Not
The value of this parameter must be larger than [PARA]InterRatCsThd2DEcN0[/PARA].involved N (No impact on the UE in idle mode) Not
The value of this parameter must be larger than [PARA]InterRatCsThd2DRscp[/PARA]. involved N (No impact on the UE in idle mode) Not This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode) Not involved
None
Not involved
None N (No impact on the UE in idle mode) This parameter is Valid when [PARA]EmergLCSSwitch[/PARA] mode)to ON. N (no impact on the UE in idle is set
None N (No impact on the UE in idle mode) Not involved This parameter is Valid when [PARA]EmergLCSSwitch[/PARA] mode)to ON and [PARA]InterRatHOPermit[/PARA] is set to YES. N (no impact on the UE in idle is set Not involved
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None
Not involved
None
Not involved
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to PERIODICAL_REPORTING. N (No impact on the UE in idle mode) Not involved
None
Not involved
None
Not involved
None
Not involved
The value of this parameter must be smaller thanon the UE in idle mode) N (No impact [PARA]InterRatR99PsThd2FEcN0[/PARA]. Not involved
The value of this parameter must be smaller thanon the UE in idle mode) N (No impact [PARA]InterRatR99PsThd2FRscp[/PARA]. Not involved
The value of this parameter must be larger than [PARA]InterRatR99PsThd2DEcN0[/PARA]. N (No impact on the UE in idle mode) Not involved
The value of this parameter must be larger than [PARA]InterRatR99PsThd2DRscp[/PARA]. N (No impact on the UE in idle mode) Not involved
None N (No impact on the UE in idle mode) Not involved None N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode) Not involved None Y Port
This parameter is valid when [PARA]IntraFreqMeasQuantity[/PARA] is set to CPICH_EC/NO. N (No impact on the UE in idle mode) Not involved
This parameter is valid when [PARA]IntraFreqMeasQuantity[/PARA] is set to CPICH_RSCP. N (No impact on the UE in idle mode) Not involved
None
Not involved
When [PARA]ChoiceRprtUnitForDlBa sicMeas[/PARA] is set to MIN,the value of this parameter must satisfy the following relationship: [PARA]IntraFreqLdbPeriodTime rLen[/PARA] > 2 x 60 x [PARA]MinForDlBasicMeas[/P ARA]; When [PARA]ChoiceRprtUnitForDlBa sicMeas[/PARA] is set to TEN_MSEC,the value of this parameter must satisfy the following relationship: [PARA]IntraFreqLdbPeriodTime rLen[/PARA] x 1000 > 2 x [PARA]TenMsecForDlBasicMe as[/PARA]. N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode)
None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) This parameter is Valid when [PARA]ForcedSHOSwitch[/PARA] is set to ON. N (no impact on the UE in idle mode)
The value of this parameter must satisfy the following relationship: ([PARA]IntraRelThdFor1ACSN VP[/PARA] [PARA]Hystfor1A[/PARA] / 2) < ([PARA]IntraRelThdFor1BCSN VP[/PARA] + [PARA]Hystfor1B[/PARA] / 2).
Not involved
The value of this parameter must satisfy the following relationship: ([PARA]IntraRelThdFor1ACSV P[/PARA] [PARA]Hystfor1A[/PARA] / 2) < ([PARA]IntraRelThdFor1BCSV P[/PARA] + [PARA]Hystfor1B[/PARA] / 2).
Not involved
The value of this parameter must satisfy the following relationship: ([PARA]IntraRelThdFor1APS[/ PARA] [PARA]Hystfor1A[/PARA] / 2) < ([PARA]IntraRelThdFor1BPS[/P ARA] + [PARA]Hystfor1B[/PARA] / 2).
N (No impact on the UE in idle mode) This parameter is Valid when [PARA]ForcedSHOSwitch[/PARA] is set to ON. N (no impact on the UE in idle mode)
The value of this parameter must satisfy the following relationship: ([PARA]IntraRelThdFor1ACSN VP[/PARA] [PARA]Hystfor1A[/PARA] / 2) < ([PARA]IntraRelThdFor1BCSN VP[/PARA] + [PARA]Hystfor1B[/PARA] / 2).
Not involved
The value of this parameter must satisfy the following relationship: ([PARA]IntraRelThdFor1ACSV P[/PARA] [PARA]Hystfor1A[/PARA] / 2) < ([PARA]IntraRelThdFor1BCSV P[/PARA] + [PARA]Hystfor1B[/PARA] / 2).
Not involved
The value of this parameter must satisfy the following relationship: ([PARA]IntraRelThdFor1APS[/ PARA] [PARA]Hystfor1A[/PARA] / 2) < ([PARA]IntraRelThdFor1BPS[/P ARA] + [PARA]Hystfor1B[/PARA] / 2).
N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]LNKT[/PARA] in [MML]LOP VCL[/MML] is set to IPOAPVC,the valueon PVC N (No impact on the UE in idle mode) Services carried of [PARA]IPADDR[/PARA] should be s
In [MML]ADD IPOAPVC[/MML] The local [IP address] and the [Peer IP address] must be in the same network segment. When the value of [PARA]LNKT[/PARA] in [MML]ACT VCLCC[/MML] is set to IPOAPVC, the IP address should be set. Not involved Not involved None Not involved Not involved The [PARA]IPADDR[/PARA] in Not involved IPPATH[/MML] can not be at one network segment with the peer IP address of SCTPLNK or I [MML]ADD Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved
None Not involved Not involved When the value of [PARA]IPLOGPORTFLAG[/PARA] in in idle mode) NODEBIP[/MML] is set to YES, the IPLPN should be set. N (No impact on the UE [MML]ADD Not involved When the value of [PARA]IPLOGPORTFLAG[/PARA] in in idle mode) NODEBIP[/MML] is set to YES, this parameter should be set. N (No impact on the UE [MML]ADD Not involved
When the value of [PARA]NBTRANTP[/PARA] inthe UE in idle mode) N (No impact on [MML]ADD NODEBIP[/MML] is set to IPTRANS_IP or ATMANDIPTRANS_IP, this p Not involved When the value of [PARA]NBTRANTP[/PARA] inthe UE in idle mode) N (No impact on [MML]ADD NODEBIP[/MML] is set to IPTRANS_IP or ATMANDIPTRANS_IP, this p Not involved The parameter should be configured when [PARA]TnlBearerType[/PARA] is modified from ATM to IP or dual stack ATM/IP. N (No impact on the UE in idle mode) Not involved When the value of [PARA]IPTYPE[/PARA] in [MML]ADD ETHIP[/MML] is set to SECOND, the IP address index should be set. When the value of [PARA]IPTYPE[/PARA] in [MML]ADD ETHTRKIP[/MML] is set to SECOND, the IP address index Not involved Not involved should be set. None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None Not involved Not involved
None N (No impact on the UE in idle mode) Not involved None Not involved Not involved When the value of [PARA]ISQOSPATH[/PARA] in [MML]ACT IPPM[/MML] is selected as YES, the PHB should be set. Not involved Not involved When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set toinvolved or IUCS, and the value of [PARA]TRANS Not involved Not IUB, IUR,
Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved Not involved
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved None Y Port When the value of [PARA]J0RXT[/PARA] in [MML]SET OPT[/MML] is set to 1 byte, 16 byte, or 64 byte, the J0 hope incept value should be Y Port None Y Port When the value of [PARA]J0TXT[/PARA] in [MML]SET OPT[/MML] is set to 1 byte, 16 byte, or 64 byte, the J0 transmit value should be set. Y Port None Y Port When the value of [PARA]J1RXT[/PARA] in [MML]SET OPT[/MML] is set to 1 byte, 16 byte, or 64 byte, the J1 hope incept value should be Y Port None Y Port When the value of [PARA]J1TXT[/PARA] in [MML]SET OPT[/MML] is set to 1 byte, 16 byte, or 64 byte, the J1 transmit value should be set. Y Port
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
When the value of [PARA]MODE[/PARA] in [MML]STR IPCHK[/MML] is set to PRIMARY, the KEYCHK should be set. Not involved Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
The value of this parameter is dependent on the value of [PARA]LAC[/PARA] in [MML]ADD SAC[/MML]. Not involved Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode) Not involved When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode) Not involved When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode) Not involved When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode) Not involved When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved
If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command.
Not involved
This parameter is valid only when the [PARA]LdbDRDSwitchDCH[/P ARA] parameter is set to ON. If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command; This parameter is valid only when the [PARA]LdbDRDSwitchDCH[/P ARA] parameter is set to ON. N (No impact on the UE in idle mode)
Not involved
This parameter is valid only when the [PARA]LdbDRDSwitchHSDPA [/PARA] parameter is set to ON. If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command; This parameter is valid only when the [PARA]LdbDRDSwitchHSDPA [/PARA] parameter is set to ON. N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) the [PARA]LdbDRDLoadRemainThdDCH[/PARA] parameter is set to ON. Not involved This parameter is valid only when N (No impact on the UE in idle mode) the [PARA]LdbDRDSwitchHSDPA[/PARA] parameter is set to ON. Not involved
If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through N (No impact on the UE in idle mode) Not involved
If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) the [PARA]LdbDRDchoice[/PARA] parameter is set to POWER. Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
[PARA]LdrFirstPri[/PARA],[PARA]LdrSecondPri[/PARA],[PARA]LdrThirdPri[/PARA],[PARA]LdrFourthPri[/PARA]are different between N (No impact on the UE in idle mode) Not involved
[PARA]LdrFirstPri[/PARA],[PARA]LdrSecondPri[/PARA],[PARA]LdrThirdPri[/PARA],[PARA]LdrFourthPri[/PARA]are different between N (No impact on the UE in idle mode) Not involved
When [PARA]ChoiceRprtUnitForUlBa sicMeas[/PARA] and [PARA]ChoiceRprtUnitForDlBa sicMeas[/PARA] are set to MIN,the value of this parameter must satisfy the following relationship: [PARA]LdrPeriodTimerLen[/PA RA] > 2 x 60 x [PARA]MinForUlBasicMeas[/P ARA]; [PARA]LdrPeriodTimerLen[/PA RA] > 2 x 60 x [PARA]MinForDlBasicMeas[/P ARA]; When [PARA]ChoiceRprtUnitForUlBa sicMeas[/PARA] and [PARA]ChoiceRprtUnitForDlBa sicMeas[/PARA] are set to TEN_MSEC,the value of this parameter must satisfy the following relationship: [PARA]LdrPeriodTimerLen[/PA RA] x 1000 > 2 x [PARA]TenMsecForUlBasicMe as[/PARA]; [PARA]LdrPeriodTimerLen[/PA RA] x 1000 > 2 x [PARA]TenMsecForDlBasicMe as[/PARA].
Not involved
[PARA]LdrFirstPri[/PARA],[PARA]LdrSecondPri[/PARA],[PARA]LdrThirdPri[/PARA],[PARA]LdrFourthPri[/PARA]are different between N (No impact on the UE in idle mode) Not involved
[PARA]LdrFirstPri[/PARA],[PARA]LdrSecondPri[/PARA],[PARA]LdrThirdPri[/PARA],[PARA]LdrFourthPri[/PARA]are different between N (No impact on the UE in idle mode) Not involved 1.The parameter is used in command [MML]ADD ADJMAP [/MML] as loadeq table index for gold,silver,and bronze users. 2.When TRANST of ADJNODE is dual stack or hybird IP,loadeq can be added. Not involved Not involved The load EQ table index is configured by impact on the UEof [PARA]LEI[/PARA] inNot involved LOADEQ[/MML]. N (No setting the value in idle mode) [MML]ADD The load EQ table index is configured by impact on the UEof [PARA]LEI[/PARA] inNot involved LOADEQ[/MML]. N (No setting the value in idle mode) [MML]ADD The load EQ table index is configured by impact on the UEof [PARA]LEI[/PARA] inNot involved LOADEQ[/MML]. N (No setting the value in idle mode) [MML]ADD This is a parameter in [MML]ADD OPC[/MML]. The [PARA]LENO[/PARA] field in [MML]ADD M3LE[/MML] Not involved Not involved None Not involved Not involved None Not involved Not involved When the value of [PARA]LCARRYT[/PARA] in [MML]ADD VPCLCX[/MML] isNot involved Not involved set to FRAATM, this parameter should be set. When the value of [PARA]OT[/PARA] in [MML]ACTUE in idle mode) set to Step_by_Step and the value of [PARA]BT[/PARA] is set to SP N (No impact on the PACH[/MML] is Not involved
None Not involved Not involved None Not involved Not involved When the value of [PARA]LCARRYT[/PARA] in [MML]ADD VPCLCX[/MML] isNot involvedthis parameter should be set. Not involved set to IMA, This paramter is valid only when [PARA]DlSFLimitCMInd[/PARA] is set to TRUE. Not involved N (No impact on the UE in idle mode) The low activity rate adjustment functionimpact on the UE in idle mode) N (no is invalid when [PARA]LittleRateThd[/PARA]>=[PARA]UlDcccRateThd[/PARA] and [PARA]Little Not involved None Not involved Not involved
When the value of [PARA]LNKT[/PARA] in [MML]SET E1T1[/MML] is set to E1_DOUBLE_FRAME or E1_CRC4_MULTI_FRAME, the v Not involved Not involved When the value of [PARA]BT[/PARA] in [MML]SET E1T1LOP[/MML] is set to AEUa or PEUa, the link number should be set and the value range is from 0 to 31. When the value of [PARA]BT[/PARA] in [MML]SET E1T1LOP[/MML] is set to AOUa or POUa, the link number should be set and the value range is from 0 to 167. When the value of [PARA]BT[/PARA] in [MML]LOP E1T1[/MML] is set to AEUa or PEUa, the value range of [PARA]LNKN[/PARA] is 0 to 31. When the value of [PARA]BT[/PARA] in [MML]LOP E1T1[/MML] is set to AOUa or POUa, the value range of [PARA]LNKN[/PARA] is 0 to 167. When the value of [PARA]BT[/PARA] in [MML]STR E1T1TST[/MML] is set to AEUa or PEUa, the link number is required and the value range is from 0 to 31. When the value of [PARA]BT[/PARA] in [MML]STR E1T1TST[/MML] N (No impact on the UE in idle mode) Not involved is set to AOUa or POUa, the link
None
Not involved
Not involved
None Not involved Not involved When the value of [PARA]LS[/PARA] in [MML]SET E1T1[/MML] is set to SINGLE,the value range of [PARA]LNKT[/PARA] is E1_DOUB Not involved Not involved
None Not involved Not involved The parameter must not be the same asinvolved Not any IP address that has been configured in theNot involved RNC. None N (No impact on the UE in idle mode) Not involved None Not involved Not involved
None Y Cell None Y Services that the SCTP link bears None Y Services that the SCTP link bears When the value of [PARA]MODE[/PARA] in [MML]ADD SCTPLNK[/MML] is set to Client, this parameter can be modified. Y Services that the SCTP link bears None Not involved Not involved This parameter determines whether [PARA]LOGPORTSN[/PARA] and [PARA]LOGPORTNO[/PARA] in [MML]ADD SCTPLNK[/MML] a Y Services that the SCTP link bears When the value of [PARA]LOGPORTFLAG[/PARA] in [MML]ADD SCTPLNK[/MML] is set tothe SCTP parameter is valid. Y Services that ON, this link bears When the value of [PARA]LOGPORTFLAG[/PARA] in [MML]ADD SCTPLNK[/MML] is set tothe SCTP parameter is valid. Y Services that ON, this link bears None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None Y Services carried on the E1/T1 link When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode) Not involved When the value of [PARA]LCARRYT[/PARA] in [MML]ADD VPCLCX[/MML] isNot involved this parameter should be set. Not involved set to NCOPT,
When the value of [PARA]CARRYFLAG[/PARA] in [MML]ADD IPPATH[/MML]Notset to IP LGCPORT, this parameter is valid. Not involved is involved
None Not involved Not involved When the value of [PARA]CARRYFLAG[/PARA] in [MML]ADD IPPATH[/MML]IP Path IP LGCPORT, this parameter is valid. Y is set to None Not involved Not involved None Not involved Not involved
None Not involved Not involved None Not involved Not involved None Not involved Not involved When the value of [PARA]LCARRYT[/PARA] in [MML]ADD VPCLCX[/MML] isNot involvedthis parameter should be set. Not involved set to UNI, When the value of [PARA]CXT[/PARA] in [MML]ADD VPCLCX[/MML] is set to Not involved parameter should be set. Not involved VCLCX, this None Not involved Not involved None Y The SCTP link works as the server and the upper-layer app None N (No impact on the UE in idle mode) Not involved This parameter is valid when [PARA]DtxInvalid[/PARA] is set to mode) N (No impact on the UE in idle ON. Not involved This parameter is valid when [PARA]DtxInvalid[/PARA] is set to mode) N (No impact on the UE in idle ON. Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None
Not involved
When [PARA]CARRYLNKT[/PARA] is SAAL-SCTP, this parameter is valid. Not involved None Not involved
None N (no impact on the UE in idle mode) Not involved MASK needs to be set when [PARA]CONTEXTTYPE[/PARA] in [MML]RST IUR[/MML] is set to Context_Group; MASK does not need to Not involved Not involved None Not involved Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved
This parameter is valid only when N(impact on Cell Selection and Reselection ofis setNotTRUE.mode) [PARA]MaxAllowedUlTxPowerInd[/PARA] the UE in idle to involved None N (No impact on the UE in idle mode) Not involved
Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode)
Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode) The value to be set should be larger than the value of [PARA]MAXPATHRETR[/PARA]involved N (No impact on the UE in idle mode) Not in [MML]ADD SCTPLNK[/MML].
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None 1.When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. 2.[PARA]MINBW[/PARA] must be less than [PARA]MAXBW[/PARA]. The value of this parameter must satisfy the following relationship: [PARA]MaxCAPSLowLoad[/P ARA] > [PARA]MaxCAPSMidLoad[/PA RA] > [PARA]SharingOutCAPSMidLo ad[/PARA].
Not involved
Not involved
Not involved
The value of this parameter must satisfy the following relationship: [PARA]MaxCAPSLowLoad[/P ARA] > [PARA]MaxCAPSMidLoad[/PA RA] > [PARA]SharingOutCAPSMidLo ad[/PARA]. None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (no impact on the UE in idle mode) Not involved The value of this parameter must not (No impact [PARA]MaxCellInActiveSet[/PARA] of involved N larger than on the UE in idle mode) Not [MML]SET INTRAFREQHO[/MML] or [MML]AD This parameter is required when the [PARA]TrchType[/PARA] parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS. N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]FPMUXSWITCH[/PARA] UE[MML]ADD IPPATH[/MML] is set tomode) N (no impact on the in in connected mode and theNot involved UE in idle YES,this parameter is valid. None N (no impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None N (No impact on the UE in idle mode) Not involved [PARA]MAXMFLEN[/PARA] must not be less than [PARA]MAXSFLEN[/PARA]*2 +8. When the value of [PARA]PPPMUX[/PARA] in [MML]ADD MPGRP[/MML] is set to ENABLE, this parameter should be set. Y PPP link None N (No impact on the UE in idle mode) Not involved When the value of [PARA]SAALLNKT[/PARA] isthe UENNI, this parameter is valid. involved N (No impact on set to in idle mode) Not The value to be set should be smaller(No impact on the [PARA]MAXASSOCRETR[/PARA] in [MML]ADD SCTPLNK[/MML]. N than the value of UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) The value of this parameter must be set to meet the following conditions: 100 x [PARA]MaxQueueTimeLen[/PA RA] > [PARA]PollTimerLen[/PARA]. N (No impact on the UE in idle mode) [PARA]MAXMFLEN[/PARA] must not be less than [PARA]MAXSFLEN[/PARA]*2 +8. 1.When the value of [PARA]PPPMUX[/PARA] in [MML]ADD MPGRP[/MML] is set to ENABLE, this parameter should be set. 2.[PARA]MAXMFLEN[/PARA ] must not be less than [PARA]MAXSFLEN[/PARA]*2 +8. Y None N (No impact on the UE in idle mode) None Not involved Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved Not involved
None
Not involved
None N (No impact on the UE in idle mode) Not involved None Not involved Not involved When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is setNotMBFD, the multi hop BFD detect local IP should be se Not involved to involved Only valid to the slot of FG2a and Not involved GOUa. Not involved None Not involved Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved This parameter is used with the [MML]ADD MBMSALARMSERVICE[/MML] command to enable the no MBMS data check. If the [MML]A N (No impact on the UE in idle mode) Not involved This parameter is valid olny when N (No impact on the UE in idle is ON. [PARA]MbmsSwitch[/PARA] mode) Not involved None Not involved Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None N (No impact on the UE in idle mode) Not involved When the value of [PARA]ST[/PARA] in [MML]ADD ATMTRF[/MML] is set to RTVBR or NRTVBR, this parameter should be set. Not involved Not involved
None
Not involved
Not involved
None
Not involved
None
Not involved
None N (No impact on the UE in idle mode) Not involved When the value of [PARA]MPTYPE[/PARA] inon the UE in idle mode) N (No impact [MML]ADD MPGRP[/MML] is set to MCPPP, this parameter should be set. Not involved When the value of [PARA]ST[/PARA] in [MML]ADD ATMTRF[/MML] is set to UBR_PLUS, the Minimum cell rate should be set. Not involved Not involved
None None
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode) Not involved
None None
When the value of [PARA]MEPTYPE[/PARA] in [MML]ADD ETHMEP[/MML] isNot to LocalMep, the PortNo and PortType should be set. Not involved set involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved This paramter is valid only when [PARA]STTDSupInd[/PARA] of [MML]ADD CELLSETUP[/MML] is set to STTD_Supported. N (No impact on the UE in idle mode) Not involved When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved
Valid when [PARA]ChoiceRptUnitForAmrE[/PARA] is set to MIN N (no impact on the UE in idle mode)
Not involved
Not involved
Valid when [PARA]ChoiceRptUnitForBeF[/PARA] is UE to MINmode) N (no impact on the set in idle This parameter is valid only when [PARA]ChoiceRprtUnitForDlBa sicMeas[/PARA] is set to MIN,and it must satisfy the following relationship: [PARA]MinForDlBasicMeas[/P ARA] x 60 < [PARA]IntraFreqLdbPeriodTime rLen[/PARA]/2; [PARA]MinForDlBasicMeas[/P ARA] x 60 < [PARA]PucPeriodTimerLen[/PA RA]/2; [PARA]MinForDlBasicMeas[/P ARA] x 60 < [PARA]LdrPeriodTimerLen[/PA RA]/2; [PARA]MinForDlBasicMeas[/P ARA] x 60000 < [PARA]OlcPeriodTimerLen[/PA RA]/2 . This parameter is valid only when [PARA]ChoiceRprtUnitForDlBa sicMeas[/PARA] is set to MIN,and it must satisfy the following relationship: [PARA]MinForDlBasicMeas[/P ARA] x 60 < [PARA]IntraFreqLdbPeriodTime rLen[/PARA]/2; [PARA]MinForDlBasicMeas[/P N (No impact on the UE in idle mode) ARA] x 60 <
Not involved
Not involved
This parameter is valid only when N (No impact on the UE in idle mode) [PARA]ChoiceRprtUnitForDlOlcMeas[/PARA] is Not to MIN. set involved
This parameter is valid only when N (No impact on the UE in idle mode) [PARA]ChoiceRprtUnitForHsdpaRateMeas[/PARA] isinvolved Not set to MIN.
This parameter is valid only when N (No impact on the UE in idle mode) [PARA]ChoiceRprtUnitForHsdpaPwrMeas[/PARA] is involved Not set to MIN.
This parameter is valid only when N (No impact on the UE in idle mode) [PARA]ChoiceRprtUnitForHsupaRateMeas[/PARA] isinvolved Not set to MIN. This parameter is valid only when [PARA]ChoiceRprtUnitForUlBa sicMeas[/PARA] is set to MIN,and it must satisfy the following relationship: [PARA]MinForUlBasicMeas[/P ARA] x 60 < [PARA]LdrPeriodTimerLen[/PA RA]/2; [PARA]MinForUlBasicMeas[/P ARA] x 60000 < [PARA]OlcPeriodTimerLen[/PA RA]/2 . This parameter is valid only when [PARA]ChoiceRprtUnitForUlBa sicMeas[/PARA] is set to MIN,and it must satisfy the following relationship: [PARA]MinForUlBasicMeas[/P ARA] x 60 < [PARA]LdrPeriodTimerLen[/PA RA]/2; [PARA]MinForUlBasicMeas[/P ARA] x 60000 < [PARA]OlcPeriodTimerLen[/PA RA]/2.
Not involved
This parameter is valid only when N (No impact on the UE in idle mode) [PARA]ChoiceRprtUnitForUlOlcMeas[/PARA] is Not to MIN. set involved
Valid when [PARA]ChoiceRptUnitForVpE[/PARA] isUE in idle mode) N (no impact on the set to MIN None N (No impact on the UE in idle mode) The value of this parameter must satisfy the following relationship: [PARA]MinPCPICHPower[/PA RA] <= [PARA]MaxPCPICHPower[/PA RA].
N (No impact on the UE in idle mode) Not involved When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is setNotSBFD or MBFD, the min interval of BFD packet receiv Not involved to involved When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is setNotSBFD or MBFD, the min interval of BFD packet send Not involved to involved None N (No impact on the UE in idle mode) Not involved None Y Cell
None Not involved Not involved When [PARA]MOCNSupport[/PARA] in [MML]SET OPERATORSHARINGMODE[/MML] is set to YES, MocnControlSwitch needs to be s N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None Y Port None N (No impact on the UE in idle mode) Not involved When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is setNotSBFD or ARP, the port work mode should be set. Not involved to involved
None Y Services carried on the SCTP link None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is se N (No impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved When the value of [PARA]USEMP[/PARA] in [MML]ADD NODEBESN[/MML] isNot involved this parameter should be set. N (No impact on the UE in idle mode) set to Enable,
None N (No impact on the UE in idle mode) Not involved When the value of [PARA]SAALLNKT[/PARA] is set to NNI, this parameter is valid. involved Not involved Not None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (no impact on the UE in idle mode) Not involved
None None
N (No impact on the UE in idle mode) N (no impact on the UE in idle mode)
None N (no impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]MsgInd[/PARA] isin idle mode may receive the valid. built-in cell broadcast messages.) is set to ON in [MML]SET N (The UE set to ON, this parameter is RNC When [PARA]CBSwitch[/PARA] Not involved None N (The UE in idle mode may receive the RNC built-in cell broadcast messages.) Not involved None Not involved Not involved The value of this parameter must satisfy the following relationship: [PARA]MtchMaxPwr[/PARA] > [PARA]MtchRsvPwr[/PARA] . The value of this parameter must satisfy the following relationship: [PARA]MtchMaxSf[/PARA] > [PARA]MtchRsvSf[/PARA] .
Not involved
Not involved
The value of this parameter must fulfillinvolved Not the following condition: [PARA]MtchMinPerc0[/PARA] >= [PARA]MtchMinPerc15[/PARA]. Not involved
The value of this parameter must fulfillinvolved Not the following condition: [PARA]MtchMinPerc0[/PARA] >= [PARA]MtchMinPerc15[/PARA]. Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved The value of this parameter must satisfy the following relationship: [PARA]MtchMaxPwr[/PARA] > [PARA]MtchRsvPwr[/PARA]. The value of this parameter must satisfy the following relationship: [PARA]MtchMaxSf[/PARA] > [PARA]MtchRsvSf[/PARA] . None
Not involved
N (No impact on the UE in idle mode) N (no impact on the UE in idle mode)
When the value of [PARA]MTRLGY[/PARA] in [MML]ADD GPS[/MML] is selected as MET, the ALTITUDE should be set; When the value of [PARA]MTRLGY[/PARA] in [MML]ADD GPS[/MML] is selected as IMP, the ALTITUDEIMP should be set.
Not involved
Not involved
None
Port
When the value of [PARA]PPPMUX[/PARA] in [MML]ADD MPGRP[/MML] is set to ENABLE, this parameter should be set. Y PPP link When the value of [PARA]MODE[/PARA] in [MML]STR IPCHK[/MML] is set to REDPORT, the backup port mask should be set. Not involved Not involved When the value of [PARA]SAALLNKT[/PARA] isthe UENNI, this parameter is valid. involved N (No impact on set to in idle mode) Not None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None
Not involved
The value of this parameter must be set to meet the following conditions: [PARA]NB01max[/PARA] >= [PARA]NB01min[/PARA]. Y Cell The value of this parameter must be set to meet the following conditions: [PARA]NB01max[/PARA] >= [PARA]NB01min[/PARA]. Y Cell None N (No impact on the UE in idle mode) Not involved None Y The SCTP link works as the server and the upper-layer app When the value of [PARA]NBTRANTP[/PARA] inthe UE in idle mode) N (No impact on [MML]ADD NODEBIP[/MML] is set to IPTRANS_IP or ATMANDIPTRANS_IP, this p Not involved When the value of [PARA]NBTRANTP[/PARA] inthe UE in idle mode) N (No impact on [MML]ADD NODEBIP[/MML] is set to IPTRANS_IP or ATMANDIPTRANS_IP, this p Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]NBTRANTP[/PARA] inthe UE in idle mode) N (No impact on [MML]ADD NODEBIP[/MML] is set to IPTRANS_IP or ATMANDIPTRANS_IP, this p Not involved When the value of [PARA]NBTRANTP[/PARA] inthe UE in idle mode) N (No impact on [MML]ADD NODEBIP[/MML] is set to IPTRANS_IP or ATMANDIPTRANS_IP, this p Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]USENBLB2[/PARA]on the UE in idle NODEBESN[/MML] isinvolved N (No impact in [MML]ADD mode) Not set to Enable, this parameter should be set.
None
Not involved
If the Downlink CAC algorithm switch select theon the UE in idlenumber algorithm,then Intra Frequency LDB Algorithm must be closed. N (No impact equivalent user mode) Not involved
PUC should not be adopted if cell's inter-frequency the UE in idlecontrol information Not involved not required, the latter is set by[MML]ADD N (No impact on measurement mode) is configured
None
Not involved
None
Not involved
None
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved
None N (No impact on the UE in idle mode) Not involved This paramter is valid only when [PARA]DynShutDownType[/PARA] is set to ConditionalShutDown. N (No impact on the UE in idle mode) Not involved
None None
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter is valid only when N(impact on Cell Selection andset to CONFIGURED. in idle mode) [PARA]NonhcsInd[/PARA] is Reselection of the UE involved Not None Y RNC None Not involved Not involved
For AEUa/AOUa/UOIa_ATM, next hop must be IPOA PVC peer address, for PEUa/POUa, next hop must be PPP link peer ip or MLPPP peer Not involved Not involved
The value of the parameter must satisfy the function below: [PARA]NFastSpdEst[/PARA]*[ PARA]TSlowSpdEst[/PARA] >= [PARA]NSlowSpdEst[/PARA]*[ PARA]TFastSpdEst[/PARA].
N (No impact on the UE in idle mode) This parameter depends on network planning. Not involved
None N (No impact on the UE in idle mode) Not involved NMO needs to be set when [PARA]CNDomainId[/PARA] in [MML]ADD CNDOMAIN[/MML] is set to PS_DOMAIN; NMO does not need t N (No impact on the UE idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to IUB, this parameter is valid. When the value of [PARA]SelectType[/PARA] in [MML]STR NODEBDETECT[/MML] is set to SINGLE, this parameter is valid. None Not involved Not involved Not involved Not involved
None
Not involved
The value of this parameter is dependent on the value of [PARA]NodeBName[/PARA] ininvolved Not involved Not [MML]ADD NODEB[/MML]. None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved None N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
This paramter is valid only when [PARA]NPrioFlag[/PARA] is set to TRUE. This paramter is valid only when [PARA]NPrioFlag[/PARA] is set to TRUE; Also the value of this parameter must be different to the others.
Not involved
This paramter is valid only when [PARA]NPrioFlag[/PARA] is set to TRUE. N (No impact on the UE in idle mode)
Not involved
None
Not involved
None
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
RNC
1. If the original ATM address of the NodeB is configured with the route through [MML]ADD AAL2RT[/MML], the parameter cannot be modified. 2. If the original ATM address of the NodeB is configured with the route in the AAL2RT table, the parameter cannot be modified.
Not involved
Not involved
The value of the parameter must satisfy the function below: [PARA]NFastSpdEst[/PARA]*[ PARA]TSlowSpdEst[/PARA] >= [PARA]NSlowSpdEst[/PARA]*[ PARA]TFastSpdEst[/PARA].
None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
When [PARA]DsacAutoSwitch[/PARA ] is set to ON,the parameter need configure;else,need not configure. If [MML]ADD CELLDSACMANUALPARA[/ MML][PARA]RestrictionType[/ PARA] value is RestrictionFixed,need set AcRestriction value;when [MML]ADD CELLDSACMANUALPARA[/ MML][PARA]RestrictionType[/ PARA] value is RestrictionFlexible,no need set AcRestriction value. N (No impact on the UE in idle mode)
Not involved
None Not involved Not involved [PARA]OAMFLOWDSCP[/PARA] (No impactthe the UE in idle mode) of IPPATH,Notany DSCP used in [MML]ADD TRMMAP[/MML]. N can not be on same with any DSCP or involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When [PARA]ChoiceRprtUnitForUlBa sicMeas[/PARA] and [PARA]ChoiceRprtUnitForDlBa sicMeas[/PARA] are set to MIN,the value of this parameter must satisfy the following relationship: [PARA]OlcPeriodTimerLen[/PA RA] > 2 x 60 x 1000 x [PARA]MinForUlBasicMeas[/P ARA]; [PARA]OlcPeriodTimerLen[/PA RA] > 2 x 60 x 1000 x [PARA]MinForDlBasicMeas[/P ARA]; When [PARA]ChoiceRprtUnitForUlBa sicMeas[/PARA] and [PARA]ChoiceRprtUnitForDlBa sicMeas[/PARA] are set to TEN_MSEC,the value of this parameter must satisfy the following relationship: [PARA]OlcPeriodTimerLen[/PA RA] > 2 x [PARA]TenMsecForUlBasicMe as[/PARA]; [PARA]OlcPeriodTimerLen[/PA RA] > 2 x [PARA]TenMsecForDlBasicMe as[/PARA].
Not involved
None None
None Not involved Not involved None N (no impact on the UE in idle mode) Not involved When the value of [PARA]BT[/PARA] in [MML]SET OPT[/MML] is set to AOUa or POUa, and the [PARA]PS[/PARA] in [MML]SET OPT Not involved Not involved Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_CENTER Not involved N (no impact on the BOTH or mode) None N (No impact on the UE in idle mode) Not involved Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_ANTENNA Not involved N (no impact on the BOTH or mode) None N (no impact on the UE in idle mode) Not involved
This parameter is valid when the OVERLAY_SWITCHUEON. The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR N (No impact on the is in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (no impact on the UE in connected mode and theNot involved UE in idle mode) None N (no impact on the UE in connected mode) Not involved When the value of [PARA]LNKT[/PARA] in [MML]ACT VCLCC[/MML] is set to AAL2PATH, the AAL2 path ID should be set. When the value of [PARA]LNKT[/PARA] in [MML]LOP VCL[/MML] is set to AAL2PATH, the value of [PARA]PATHID[/PARA] should be set.
Not involved
Not involved
None Not involved Not involved When the value of [PARA]ANI[/PARA] in [MML]ADD IPPATH[/MML] is set to IUPS,the value of [PARA]PATHT[/PARA] must be set to R Not involved Not involved When the value of [PARA]BT[/PARA] in [MML]LODUE in idle mode) DPUb, the valueinvolved N (No impact on the PATCH[/MML] Not of [PARA]PATTYPE[/PARA] should be set. None N (Impact on page message receiving of UEs in idle mode) Not involved
1. The value of this parameter must satisfy the following relationship: [PARA]MinPCPICHPower[/PA RA] <= [PARA]PCPICHPower[/PARA] <= [PARA]MaxPCPICHPower[/PA RA] 2. To modify the PCPICH power, the intra-frequency load balance algorithm of the cell should be disabled. You can use [MML]LST CELLALGOSWITCH[/MML] to query the switch and use [MML]MOD CELLALGOSWITCH[/MML] to modify the switch. N (Impact on pilot message receiving of UEs in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
1.When the value of [PARA]ST[/PARA] in [MML]ADD ATMTRF[/MML] is set to CBR or RTVBR or NRTVBR and [PARA]UT[/PARA] is selected, this parameter should be set. 2.[PARA]PCR[/PARA] must be larger than [PARA]SCR[/PARA].
Not involved
Not involved
N (no impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved
None
Not involved
Not involved
None N (No impact on the UE in idle mode) Not involved The parameter must not be the same asinvolved Not any IP address that has been configured in theNot involved RNC. None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None Y Services that the SCTP link bears None Y Services that the SCTP link bears
When the value of [PARA]LNKT[/PARA] in [MML]LOP VCL[/MML] is set to IPOAPVC,the value of [PARA]PEERIPADDR[/PARA] should be set. When the value of [PARA]LNKT[/PARA] in [MML]ACT VCLCC[/MML] is set to IPOAPVC, the peer IP address should be set. Not involved Not involved [PARA]IPADDR[/PARA] and [PARA]PEERIPADDR[/PARA] in [MML]ADD IPPATH[/MML] must be at one network segment;([PARA]IP Not involved Not involved
None N (No impact on the UE in idle mode) Not involved ([PARA]IPADDR[/PARA],[PARA]PEERIPADDR[/PARA],[PARA]PEERMASK[/PARA] in [MML]ADD IPPATH[/MML]) conflicts with o Not involved Not involved None N (No impact on the UE in idle mode) Not involved None Y Services that the SCTP link bears None N (No impact on the UE in idle mode) Not involved Only when [PARA]PEERT[/PARA] (No impact to be IUB, theidle mode) can be added toinvolved port. N is selected on the UE in IPOAPVC Not a virtual
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is se N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is se N (No impact on the UE in idle mode) Not involved When the value of [PARA]PATHCHK[/PARA]on services whenIPPATH[/MML] issucceeds) N (no impact in [MML]ADD the Ping detection Notto ENABLED, this parameter is valid. set involved
This parameter is valid when [PARA]InterFreqReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode) Not involved
None
Not involved
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode) Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None N (No impact on the UE in idle mode) Not involved This parameter is valid when [PARA]AccessServiceClass[/PARA]UEs in idle mode)Not involved N (Impact on random access for is set to ASC2,ASC3,ASC4,ASC5,ASC6 or ASC7.
None Y PPP link When the value of [PARA]ISQOSPATH[/PARA] in [MML]ACT IPPM[/MML] is set to involved parameter should be set. Not involved Not YES, this 1.The phb of the traffic's transmission path is determined like this: if the phb of this transmission path is QOS, use the traffic's phb from TRMM Not involved Not involved
None None None None None None None None None None None The value of this parameter must satisfy the following relationship: [PARA]PlmnValTagMax[/PAR A] > [PARA]PlmnValTagMin[/PAR A]. The value of this parameter must satisfy the following relationship: [PARA]PlmnValTagMax[/PAR A] > [PARA]PlmnValTagMin[/PAR A].
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved N (Impact on page message receiving of UEs in idle mode) Not involved Not involved Not involved Y Port Y Port Not involved Not involved Not involved Not involved Not involved Not involved
Not involved
Not involved
Not involved Not involved When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode) Not involved When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode) Not involved If the Ip path is configured on logic port, this parameterUE in be less than [PARA]PLPRD[/PARA] and [PARA]LATPRD[/PARA] in command N (No impact on the must idle mode) Not involved
When the value of [PARA]PS[/PARA] in [MML]SET OPT[/MML] is SINGLE, the port number should be set. When the value of [PARA]LS[/PARA] in [MML]SET COPTLNK[/MML] is set to PORT or SINGLE, the parameter [PARA]PN[/PARA] should be set. When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is set to SBFD or ARP, the Ethernet port number should be set. There cannot be IP address or port controller configured on the port and the backup port . If the interface board is GOUa, the parameter [PARA]PN[/PARA] can only be 0 or 1. For FG2a board, if the type of port 0 is GE, the PN cannot be 1~3; if the type of port 4 is GE, the PN cannot be 5~7.
Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Y Port When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is setNotSBFD or ARP, the Ethernet port number should be set. Not involved to involved None Not involved Not involved None Not involved Not involved None Not involved Not involved The value of this parameter must be set to meet the following conditions: 100 x [PARA]MaxQueueTimeLen[/PA RA] > [PARA]PollTimerLen[/PARA]. N (No impact on the UE in idle mode) Not involved None None None None None None None None None N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
None Not involved Not involved None Not involved Not involved None N (Impact on random access for UEs in idle mode)Not involved When the value of [PARA]USEPPP[/PARA] in [MML]ADD idle mode) N (No impact on the UE in NODEBESN[/MML] is setinvolved this parameter should be set. Not to Enable, None Not involved Not involved
The parameter [PARA]PPPLNKN[/PARA] of PPP link and MLPPP link can not be the same. Not involved Not involved
None Not involved Not involved When the value of [PARA]PORTPROTYPE[/PARA] in [MML]ADD PORTFLOWCTRLPARA[/MML] is set to IP, this parameter should be s N (No impact on the UE in idle mode) Not involved None Not involved Not involved
This parameter is valid when [PARA]InterFreqReportMode[/PARA] is set to PERIODICAL_REPORTING. N (No impact on the UE in idle mode) Not involved None N (Impact on random access for UEs in idle mode)Not involved None N (Impact on random access for UEs in idle mode)Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None None
None
Not involved
None
Not involved
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved
None
Not involved
None
Not involved
Not involved
1. For the detection timers that do not need to configure background services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure background services, the related T1 and T2 must not be 0 at the same time. N (No impact on the UE in idle mode) 1. For the detection timers that do not need to configure conversational services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure conversational services, the related T1 and T2 must not be 0 at the same time.
Not involved
Not involved
1. For the detection timers that do not need to configure IMS signaling services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure IMS signaling services, the related T1 and T2 must not be 0 at the same time.
Not involved
1. For the detection timers that do not need to configure interactive services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure interactive services, the related T1 and T2 must not be 0 at the same time. N (No impact on the UE in idle mode) Not involved 1. For the detection timers that do not need to configure streaming services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure streaming services, the related T1 and T2 must not be 0 at the same time. N (No impact on the UE in idle mode) Not involved When the value of [PARA]BT[/PARA] in [MML]SET OPT[/MML] is set to AOUa or POUa, the port select should be set. Not involved Not involved None N (No impact on the UE in idle mode) Not involved
None
Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR or IUPS, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (Impact on network searching of UEs in idle mode) involved Not None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR or IUPS, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
None
Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
Y N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
This parameter is valid when [PARA]NcovHoOn2GldInd[/PA RA] in [MML]SET INTERRATHONCOV[/MML] is set to ON. This parameter is valid when [PARA]NcovHoOn2GldInd[/PA RA] is set to ON.
Not involved
1. For the detection timers that do not need to configure background services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure background services, the related T1 and T2 must not be 0 at the same time. N (No impact on the UE in idle mode) 1. For the detection timers that do not need to configure conversational services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure conversational services, the related T1 and T2 must not be 0 at the same time.
Not involved
N (No impact on the UE in idle mode) Not involved 1. For the detection timers that do not need to configure IMS signaling services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure IMS signaling services, the related T1 and T2 must not be 0 at the same time. N (No impact on the UE in idle mode) Not involved 1. For the detection timers that do not need to configure interactive services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure interactive services, the related T1 and T2 must not be 0 at the same time. N (No impact on the UE in idle mode) Not involved 1. For the detection timers that do not need to configure streaming services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure streaming services, the related T1 and T2 must not be 0 at the same time. N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved PsInfoUpdTmr needs to be set when (No impact on the UE in idle mode) [MML]SET Not involved N [PARA]PsInfoUpdFlag[/PARA] in IUFLEX[/MML] is set to ON; PsInfoUpdTmr does not ne None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR or IUPS, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR or IUPS, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR or IUPS, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None N (No impact on the UE in idle mode) Not involved PSNRILength needs to be set when [PARA]PsIuFlexFlag[/PARA]mode) N (No impact on the UE in idle in [MML]SET IUFLEX[/MML] is set to ON; PSNRILength does not need t Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When [PARA]DsacAutoSwitch[/PARA] impact on the UE in idle mode) configure;else,need not configure. N (No is set to ON,the parameter need Not involved
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR or IUPS, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
PS_RAB_DOWNSIZING_SWITCH(novalid when the UE in idle mode) N is impact on DRA_DCCC_SWITCH is set to ON. involved Not None Not involved Not involved None Not involved Not involved When the value of [PARA]USEFE[/PARA] in [MML]ADD NODEBESN[/MML] is Notto Enable, this parameter should be set. N (No impact on the UE in idle mode) set involved When the value of [PARA]USEFE[/PARA] in [MML]ADD NODEBESN[/MML] is Notto Enable, this parameter should be set. N (No impact on the UE in idle mode) set involved
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]BRDTYPE[/PARA] in [MML]SET ETHPORT[/MML] isNot involved the port type should be set. N (No impact on the UE in idle mode) set to FG2a, None N (No impact on the UE in idle mode) Not involved
When [PARA]ChoiceRprtUnitForDlBa sicMeas[/PARA] is set to MIN,the value of this parameter must satisfy the following relationship: [PARA]PucPeriodTimerLen[/PA RA] > 2 x 60 x [PARA]MinForDlBasicMeas[/P ARA]; When [PARA]ChoiceRprtUnitForDlBa sicMeas[/PARA] is set to TEN_MSEC,the value of this parameter must satisfy the following relationship: [PARA]PucPeriodTimerLen[/PA RA] x 1000 > 2 x [PARA]TenMsecForDlBasicMe as[/PARA]. N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved From [PARA]Q0MINDSCP[/PARA] to [PARA]Q4MINDSCP[/PARA] must obey the following rules: [PARA]Q0MINDSCP[/PARA] > [PAR N (No impact on the UE in idle mode) Not involved From [PARA]Q0MINDSCP[/PARA] to [PARA]Q4MINDSCP[/PARA] must obey the following rules: [PARA]Q0MINDSCP[/PARA] > [PAR N (No impact on the UE in idle mode) Not involved From [PARA]Q0MINDSCP[/PARA] to [PARA]Q4MINDSCP[/PARA] must obey the following rules: [PARA]Q0MINDSCP[/PARA] > [PAR N (No impact on the UE in idle mode) Not involved From [PARA]Q0MINDSCP[/PARA] to [PARA]Q4MINDSCP[/PARA] must obey the following rules: [PARA]Q0MINDSCP[/PARA] > [PAR N (No impact on the UE in idle mode) Not involved From [PARA]Q0MINDSCP[/PARA] to [PARA]Q4MINDSCP[/PARA] must obey the following rules: [PARA]Q0MINDSCP[/PARA] > [PAR N (No impact on the UE in idle mode) Not involved When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set toinvolved or IUCS, and the value of [PARA]IsROO N (No impact on the UE in idle mode) Not IUB, IUR, This parameter is valid only when [PARA]UseOfHcs[/PARA] is set to USED. This paramter is valid only when [PARA]UseOfHcs[/PARA] is set to USED. This parameter is valid only when [PARA]UseOfHcs[/PARA] is set to TRUE.
Not involved
None
N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved
None
N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved
None
N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved
None
N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved
None
N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to cho Not involved
This parameter is valid only when N(impact on Cell Selection andis set to TRUE. the UE in idle mode) [PARA]QqualminInd[/PARA] Reselection of Not involved
None
N (For the UE in idle mode, the parameter will impact the UE whether it can camp on the cell.) Not involved
None
N(For the UE in idle mode, the larger the value of this parameter is, the harder the UE to reselect to this cell b Not involved
This parameter is valid only when N(impact on Cell Selection and Reselection of the UE in idle mode) [PARA]QrxlevminInd[/PARA] is set to TRUE. Not involved
This parameter is valid only when N(impact on Cell Selection and Reselection of the UE in idle mode) [PARA]QrxlevminInd[/PARA] is set to TRUE. Not involved None N (For the UE in idle mode, the parameter will impact the UE whether it can camp on the cell.) Not involved None N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None None
N (No impact on the UE in idle mode) N (no impact on the UE in idle mode)
This paramter is valid only when [PARA]CfgRacInd[/PARA] is set to REQUIRE. Not involved Not involved None N (Impact on random access for UEs in idle mode)Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None Not involved Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode) Not involved The value of this parameter must be larger than the value ofin idle mode) N (No impact on the UE the [PARA]UpLimitCountingTime[/PARA] parameter under the [MML]SET RNC Not involved None N (No impact on the UE in idle mode) Not involved 1.When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. 2.[PARA]RECOVERTHD[/PAR A] must be larger than [PARA]RPTTHD[/PARA]. None
If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command. This parameter is valid when [PARA]RedirBandInd[/PARA] is not set to BandIndNotUsed. 1. This parameter is valid when [PARA]RedirSwitch[/PARA] is set to ONLY_TO_INTER_FREQUEN CY or ONLY_TO_INTER_RAT. 2. If the value of this parameter is set in both the [MML]SET REDIRECTION[/MML] and [MML]ADD CELLREDIRECTION[/MML] commands, the value set in the [MML]ADD CELLREDIRECTION[/MML] N (No impact on the UE in idle mode) command prevails. This parameter is valid when [PARA]RedirSwitch[/PARA] is set to ONLY_TO_INTER_FREQUEN CY or ONLY_TO_INTER_RAT. 1. This parameter is valid when [PARA]RedirSwitch[/PARA] is set to ONLY_TO_INTER_FREQUEN CY or ONLY_TO_INTER_RAT. 2. If the value of this parameter is set in both the [MML]SET REDIRECTION[/MML] and [MML]ADD CELLREDIRECTION[/MML] commands, the value set in the [MML]ADD N (No impact on the UE in idle mode) CELLREDIRECTION[/MML]
Not involved
Not involved
This parameter is valid when [PARA]RedirSwitch[/PARA] is set to ONLY_TO_INTER_FREQUEN CY or ONLY_TO_INTER_RAT. 1. This parameter is valid when [PARA]RedirSwitch[/PARA] is set to ONLY_TO_INTER_FREQUEN CY or ONLY_TO_INTER_RAT. 2. If the value of this parameter is set in both the [MML]SET REDIRECTION[/MML] and [MML]ADD CELLREDIRECTION[/MML] commands, the value set in the [MML]ADD N (No impact on the UE in idle mode) CELLREDIRECTION[/MML]
Not involved
None
Not involved
If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command; The value range of this parameter depends on the setting of the [PARA]ReDirBandInd[/PARA] parameter, as shown below: Band1 Common frequencies: [1056210838] Special frequencies: none Band2 Common frequencies: [96629938] Special frequencies: {412, 437, 462, 487, 512, 537, 562, 587, 612, 637, 662, 687} Band3 Common frequencies: [11621513] Special frequencies: none Band4 Common frequencies: [15371738] Special frequencies: {1887, N (No impact on the UE in idle mode) 1912, 1937, 1962, 1987, 2012,
Not involved
If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command; This parameter is required only when the [PARA]ReDirUARFCNUplinkI nd[/PARA] parameter is set to TRUE; The value range of this parameter depends on the setting of the [PARA]ReDirBandInd[/PARA] parameter, as shown below: Band1: Common frequencies: [96129888] Special frequencies: none Band2: Common frequencies: [92629538] Special frequencies: {12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287} Band3: Common frequencies: [9371288] N (No impact on the UE in idle mode) Special frequencies: none
Not involved
If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command. This parameter is valid when [PARA]RedirBandInd[/PARA] is not set to BandIndNotUsed. 1. This parameter is valid when [PARA]RedirBandInd[/PARA] is not set to BandIndNotUsed. 3. If the value of this parameter is set in both the [MML]SET REDIRECTION[/MML] and [MML]ADD CELLREDIRECTION[/MML] commands, the value set in the [MML]ADD CELLREDIRECTION[/MML] command prevails.
Not involved
When the value of [PARA]BT[/PARA] in [MML]SET CLK[/MML] is set to AEUa/PEUa, the value range of [PARA]REF2MCLKSRC[/PAR A] is 0 to 31. When the value of [PARA]BT[/PARA] in [MML]SET CLK[/MML] is set to AOUa/POUa, the value range of [PARA]REF2MCLKSRC[/PAR A] is 0 to 1. When the value of [PARA]BT[/PARA] in [MML]SET CLK[/MML] is set to UOIa, the value range of [PARA]REF2MCLKSRC[/PAR A] is 0 to 3. Y
RNC
When the value of [PARA]BT[/PARA] in [MML]SET CLK[/MML] is set to AEUa/PEUa, the value range of [PARA]REF2MCLKSRC[/PAR A] is 0 to 31. When the value of [PARA]BT[/PARA] in [MML]SET CLK[/MML] is set to AOUa/POUa, the value range of [PARA]REF2MCLKSRC[/PAR A] is 0 to 1. When the value of [PARA]BT[/PARA] in [MML]SET CLK[/MML] is set to UOIa, the value range of [PARA]REF2MCLKSRC[/PAR A] is 0 to 3. N (No impact on the UE in idle mode) None Y None Y None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode)
RNC RNC RNC Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
None
Not involved
None
Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None
Not involved
None
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (no impact on the UE in idle mode) N (no impact on the UE in idle mode) N (no impact on the UE in idle mode) N (no impact on the UE in idle mode) N (no impact on the UE in idle mode) N (no impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
None Not involved Not involved None N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is se N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None
Not involved
None Not involved The value of this parameter must not (Nosmaller than [PARA]RlMinDlPwr[/PARA]. N be impact on the UE in idle mode) The value of this parameter must not (Nolarger than [PARA]RlMaxDlPwr[/PARA]. N be impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved Not involved Not involved
None None None None None 1.When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. 2.[PARA]RECOVERTHD[/PAR A] must be larger than [PARA]RPTTHD[/PARA]. None None None None None None None None
Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] AAL2to UNI, IMA, FRAATM, or NCOPT, this parameter Y is set Path When the value of [PARA]RSCGRPFLAG[/PARA] in [MML]ADD AAL2PATH[/MML] is set to YES, this parameter is valid; the type of rscg Y AAL2 Path When the value of [PARA]CARRYFLAG[/PARA] in [MML]ADD IPPATH[/MML]IP Path RSCGRP, this parameter is valid;the type of rscg Y is set to None N (No impact on the UE in idle mode) Not involved
When [PARA]ISFIRSTCLASSE[/PARA] in [MML]ADD RSCGRP[/MML] is set toNot involved Not involved YES, this parameter is valid. None Not involved Not involved None N (No impact on the UE in idle mode) Not involved
None Not involved Not involved When the value of [PARA]SPCBITS[/PARA] is set to BIT14 or BIT24, this parameter is involved Y Not valid. None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None None None None None None None None None None None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
None
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None None None None None None None None None None None None None None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Y
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Port
None Y RNC When [PARA]RTCPSwitch[/PARA](No[MML]ADD CNNODE[/MML] is set to ON, RTCPBWRatio needs to be set. N in impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved When [PARA]TnlBearerType[/PARA] in [MML]ADDUE in idle mode) is set to IP_TRANS, RTCPSwitch needs to be set. N (No impact on the CNNODE[/MML] Not involved None Not involved Not involved None Not involved Not involved None N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved This parameter is valid when DRA_PS_NON_BE_STATE_TRANS_SWITCH and DRA_HSDPA_STATE_TRANS_SWITCH in [MML]SET N (no impact on the UE in idle mode) Not involved
The following relationship must be satisfied: [PARA]RtDH2FTvmThd[/PAR A] < [PARA]RtF2DHTvmThd[/PAR A]; [PARA]RtDH2FTvmThd[/PAR A] < [PARA]RtEFach2DHTvmThd[/ PARA]; [PARA]RtDH2FTvmThd[/PAR A] < [PARA]RtEFach2CpcTvmThd[/ PARA]; [PARA]RtDH2FTvmThd[/PAR A] < [PARA]RtF2CpcTvmThd[/PAR A]. N (no impact on the UE in idle mode) Not involved This parameter is valid when DRA_PS_NON_BE_STATE_TRANS_SWITCH and DRA_HSDPA_STATE_TRANS_SWITCH in [MML]SET N (no impact on the UE in idle mode) Not involved The following relationship must be satisfied: [PARA]RtDH2FTvmThd[/PAR A] < [PARA]RtEFach2CpcTvmThd[/ PARA]. N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved The following relationship must be satisfied: [PARA]RtDH2FTvmThd[/PAR A] < [PARA]RtEFach2DHTvmThd[/ PARA]. N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved The following relationship must be satisfied: [PARA]RtDH2FTvmThd[/PAR A] < [PARA]RtF2CpcTvmThd[/PAR A]. N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved The following relationship must be satisfied: [PARA]RtDH2FTvmThd[/PAR A] < [PARA]RtF2DHTvmThd[/PAR A]. N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved The value to be set should be larger than the value of [PARA]RTOMIN[/PARA] in [MML]ADD SCTPLNK[/MML] but smaller than the value N (No impact on the UE in idle mode) Not involved The value to be set should be larger than the value of [PARA]RTOMIN[/PARA] in [MML]ADD SCTPLNK[/MML]. N (No impact on the UE in idle mode) Not involved The value to be set should be smaller(No impact on the [PARA]RTOMAX[/PARA] in [MML]ADD SCTPLNK[/MML]. N than the value of UE in idle mode) Not involved None Not involved Not involved
When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode) Not involved When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved When [PARA]GRPT[/PARA] in [MML]ADD RSCGRP[/MML] is set to ATM or [PARA]BWMODE[/PARA] is set to FULL_DUPLEX, this N (No impact on the UE in idle mode) Not involved When the value of [PARA]CARRYT[/PARA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCPORT, this parameter is valid. When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid. 1.When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATMLGCPORT, this parameter is required. 2.When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATMLGCPORT, this parameter is required.
Not involved
The value of the parameter must satisfy the function below: [PARA]RxTxtoTrig6F[/PARA] [PARA]RxTxtoTrig6G[/PARA] >= 256.
N (No impact on the UE in idle mode) Not involved The value of the parameter must satisfy the function below: [PARA]RxTxtoTrig6F[/PARA] [PARA]RxTxtoTrig6G[/PARA] >= 256. N (No impact on the UE in idle mode) Not involved When [PARA]CARRYLNKT[/PARA] is SAAL or SAAL-SCTP, this parameter is valid. involved Not involved Not When[PARA]CARRYLNKT[/PARA]involved or SAAL-SCTP, this parameter is valid. involved Not is SAAL Not When the value of [PARA]LNKT[/PARA] in [MML]ACT VCLCC[/MML] is set to SAALLNK, the SAAL link number should be set. When the value of [PARA]LNKT[/PARA] in [MML]LOP VCL[/MML] is set to SAALLNK, the value of [PARA]SAALLNKN[/PARA] should be set. Not involved
Not involved
When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to IUB, and the value of [PARA]IsROOTNODE[/PARA Y NodeB None Not involved Not involved None N (No impact on the UE in idle mode) RNC The value of this parameter is dependent on the value of [PARA]SAC[/PARA] in [MML]ADD SAC[/MML]; This service area is not configured as a classified zone. None
None None
1.When the value of [PARA]ST[/PARA] in [MML]ADD ATMTRF[/MML] is set to RTVBR or NRTVBR and [PARA]UT[/PARA] is selected, this parameter should be set. 2.[PARA]SCR[/PARA] must be smaller than [PARA]PCR[/PARA]. None When the value of [PARA]BT[/PARA] in [MML]SET E1T1[/MML] is set to AEUa or AOUa, the value of [PARA]SCRAMBLESW[/PAR A] can be set. When the value of [PARA]BT[/PARA] in [MML]SET OPT[/MML] is set to UOIa and the logic function type is selected,the scramble switch should be set.
Not involved
Not involved
The parameter [PARA]SCTPLNKN[/PARA] in [MML]ADD SCTPLNK[/MML] When [PARA]CARRYLNKT[/PARA] is SCTP or SAAL-SCTP, this parameter is valid. Not involved
Not involved
When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]SM[/PARA] in [MML]SET TZ[/MM Y RNC None Not involved Not involved None Not involved Not involved None N (no impact on the UE in idle mode) Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None Not involved Not involved
None
Not involved
Not involved
If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None Not involved Not involved When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set toinvolved parameter is valid. Not involved Not IUPS, this The value of this parameter must satisfy the following relationship: [PARA]MaxCAPSLowLoad[/P ARA] > [PARA]MaxCAPSMidLoad[/PA RA] > [PARA]SharingOutCAPSMidLo ad[/PARA].
N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]UseOfHcs[/PARA] parameter is set to USED but not required when the [PARA]UseOfHcs[/PARA N (No impact on the UE in idle mode) Not involved
This parameter is valid when the SERVICE_HO_BASED_ON_RNC_SWITCH under theinvolved N (No impact on the UE in idle mode) Not [PARA]HoSwitch[/PARA] parameter is set to on thro
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None
Not involved
None
Not involved
None
N(For the UE in idle mode, the value of this parameter decides whether the UE can receive the information of Not involved
None None
N(For the UE in idle mode, the value of this parameter decides whether the UE can receive the information of Not involved N (No impact on the UE in idle mode) Not involved
This parameter cannot be set to FACH only when the [PARA]RrcCause[/PARA] parameter is set to EMERGCALLEST or MBMSCALLEST. N (No impact on the UE in idle mode) Not involved The parameter [PARA]SIGLKSX[/PARA] in [MML]ADD MTP3LKS[/MML] The [PARA]SIGLKSX[/PARA] field in [MML]ADD M3LKS[/MML] The parameter [PARA]SIGLKSX[/PARA] in [MML]ADD M3LKS[/MML] Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved The following relationship must be satisfied: [PARA]GoldMaxMode[/PARA] >= [PARA]SilverMaxMode[/PARA ] >= [PARA]CopperMaxMode[/PAR A]. The following relationship must be satisfied: [PARA]GoldMaxMode[/PARA] >= [PARA]SilverMaxMode[/PARA ] >= [PARA]CopperMaxMode[/PAR A]. N (no impact on the UE in idle mode)
Not involved
The following relationship must be satisfied: [PARA]GoldMaxMode[/PARA] >= [PARA]SilverMaxMode[/PARA ] >= [PARA]CopperMaxMode[/PAR A]. The following relationship must be satisfied: [PARA]GoldMaxMode[/PARA] >= [PARA]SilverMaxMode[/PARA ] >= [PARA]CopperMaxMode[/PAR A]. N (no impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None Not involved None N (No impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR or IUPS, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]UseOfHcs[/PARA] parameter is set to USED but not required when the [PARA]UseOfHcs[/PARA N (No impact on the UE in idle mode) Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Y RNC When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES, the start type should be set. Y RNC None N (no impact on the UE in idle mode) Not involved None Not involved Not involved When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]SM[/PARA] is selected, the start mo Y RNC
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved When the value of [PARA]LNKT[/PARA] in [MML]LOP VCL[/MML] is set to SAALLNK, carried onof [PARA]SN[/PARA] should be set. N (No impact on the UE in idle mode) Services the value PVC When the value of [PARA]BT[/PARA] in [MML]LODUE in idle mode) is set to SCUa, the value range of [PARA]SN[/PARA] is 6 to 7. When N (No impact on the PATCH[/MML] Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved
When [PARA]BRDTYPE[/PARA] in [MML]ADD BRD[/MML] is set to a value, the slot number and the backup mode are required. Not involved Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved
Not involved
When the value of [PARA]INHT[/PARA] in [MML]INH BRD[/MML] is set to LOGIC,the value range of [PARA]SN[/PARA] is 0, 2, 4, 8 to 27. When the value of [PARA]INHT[/PARA] in [MML]INH BRD[/MML] is set to PHYSICAL,the value range of [PARA]SN[/PARA] is 0 to 5, 8 to 27. Y When the value of [PARA]UINT[/PARA] in [MML]UIN BRD[/MML] is set to LOGIC, the slot number is required and the value range is 0, 2, 4, 8 to 27. When the value of [PARA]UINT[/PARA] in [MML]UIN BRD[/MML] is set to PHYSICAL, the slot number is required and the value range is 0 to 5, 8 to 27. Not involved
RNC
Not involved
None
Not involved
Not involved
Only valid to the slot of FG2a and GOUa. For FG2a board, if the type of port 0 is GE, the PN cannot be 1~3; if the type of port 4 is GE, the PN cannot be 5~7. none
Not involved Not involved None Not involved Not involved When the value of [PARA]LNKT[/PARA] in [MML]ACT VCLCC[/MML] is set to SAALLNK, the slot number of the SPUa should be set. Not involved Not involved None Not involved Not involved When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set toinvolved the value of [PARA]IsROOTNODE[/PARA Not involved Not IUB, and None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved
SNAC needs to be set when [PARA]SnaExistInd[/PARA] in [MML]ADD IMSISNAMAP[/MML] is set to YES; SNAC does not need to be set Not involved Not involved
None
Not involved
Not involved
None
Not involved
When the value of [PARA]SPDF[/PARA] is set to WNF, this parameter is valid. Y This parameter depends on network planning. Y When the value of [PARA]SPDF[/PARA] is set to DNF, this parameter is valid. Y
This parameter is valid when the HCS_SPD_EST_SWITCH is ON and [PARA]UseOfHcs[/PARA] is USED in [MML]ADD CELLHCS[/MML N (No impact on the UE in idle mode) Not involved
None Y RNC When the value of [PARA]BRDTYPE[/PARA] is set to FG2a,the mode)of [PARA]PTYPE[/PARA] is set to FE,[PARA]AUTO[/PARA] in [M N (No impact on the UE in idle value Not involved None N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved
None
Not involved
This parameter, [PARA]TrafficClass[/PARA], [PARA]UserPriority[/PARA] and [PARA]THP[/PARA] form an SPI mapping table. N (No impact on the UE in idle mode) Not involved None Not involved Not involved
The value of this parameter must satisfy the following relationship: [PARA]SpucHeavy[/PARA] >= [PARA]SpucLight[/PARA]; 100 >= [PARA]SpucHeavy[/PARA] + [PARA]SpucHyst[/PARA].
N (No impact on the UE in idle mode) The value of this parameter must satisfy the following relationship: [PARA]SpucLight[/PARA] >= [PARA]SpucHyst[/PARA]; 100 >= [PARA]SpucHeavy[/PARA] + [PARA]SpucHyst[/PARA].
Not involved
Not involved
The value of this parameter must satisfy the following relationship: [PARA]SpucHeavy[/PARA] >= [PARA]SpucLight[/PARA]; [PARA]SpucLight[/PARA] >= [PARA]SpucHyst[/PARA].
None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None
Not involved
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter must satisfy the followingimpact on the [PARA]SRBMBR[/PARA] >= [PARA]SRBGBR[/PARA]. N (No relationship: UE in idle mode) Not involved This parameter must satisfy the followingimpact on the [PARA]SRBMBR[/PARA] >= [PARA]SRBGBR[/PARA]. N (No relationship: UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved When the value of [PARA]MODE[/PARA] in [MML]SET in idle mode) N (No impact on the UE CLKMODE[/MML] is set to MANUAL, the value of this parameter should be set. Not involved The parameter must not be the same as any IP address that has been configured in the RNC. The parameter must not be the same as the internal IP address of the BAM. Not involved Not involved
None Not involved Not involved When 2MBPS exists on the clock source, T1BPS is not allowed to be added; when T1BPS exists on the clock source, 2MBPS is not allowed to Not involved Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]SAALLNKT[/PARA] isthe UENNI, this parameter is valid. involved N (No impact on set to in idle mode) Not
None
Not involved
None None
When the value of [PARA]OT[/PARA] in [MML]LOD PATCH[/MML] is set to SCUa, SPUa, DPUb, PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, or ALL, the value of [PARA]SRN[/PARA] should be set. When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to UNI_AAL2SWITCH, this parameter is valid. When the value of [PARA]LNKT[/PARA] in [MML]LOP VCL[/MML] is set to SAALLNK, the value of [PARA]SRN[/PARA] should be set. When the value of [PARA]SRT[/PARA] in [MML]SET CLK[/MML] is set to RBS, the value of [PARA]SRN[/PARA] should be set. When the value of [PARA]LNKT[/PARA] in [MML]ACT VCLCC[/MML] is set to SAALLNK, the subrack number should be set. none Not involved Not involved When the value of [PARA]SRT[/PARA] in [MML]SET CLK[/MML] is set to RBS, the value of [PARA]SRN[/PARA] should be set. Y RNC None Not involved Not involved None Not involved Not involved When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set toinvolved the value of [PARA]IsROOTNODE[/PARA Not involved Not IUB, and None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved Valid when [PARA]BEQosPerform[/PARA] is set theYES in idle mode) N (no impact on to UE Not involved None N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None N (no impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved SRNTI needs to be set when [PARA]CONTEXTTYPE[/PARA] in [MML]RST IUR[/MML] is set to Context_Group; SRNTI does not need to Not involved Not involved None Y RNC None N (Impact on network searching of UEs in idle mode) involved Not [PARA]SSCPUAVEUSAGEALMTHD[/PARA] must be smaller than [PARA]SSCPUMAXUSAGEALMTHD[/PARA]. Not involved Not involved [PARA]SSCPUMAXUSAGEALMTHD[/PARA] must be greater than [PARA]SSCPUAVEUSAGEALMTHD[/PARA] Not involved Not involved
None
Not involved
1.When the value of [PARA]BT[/PARA] in [MML]SET CPUTHD[/MML] is set to DPUb, the value of [PARA]SSDSPAVEUSAGEAL MTHD[/PARA] should be set. 2.[PARA]SSDSPAVEUSAGEA LMTHD[/PARA] must be smaller than [PARA]SSDSPMAXUSAGEAL MTHD[/PARA]. Not involved
Not involved
1.When the value of [PARA]BT[/PARA] in [MML]SET CPUTHD[/MML] is set to DPUb, the value of [PARA]SSDSPAVEUSAGEAL MTHD[/PARA] should be set. 2.[PARA]SSDSPMAXUSAGE ALMTHD[/PARA] must be bigger than [PARA]SSDSPAVEUSAGEAL MTHD[/PARA]. Not involved Not involved This parameter is required when the [PARA]UseOfHcs[/PARA] parameter is set to USED but not required when the [PARA]UseOfHcs[/PARA N (No impact on the UE in idle mode) Not involved None N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved
None
Not involved
Not involved
None Not involved Not involved When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES, the start time should be set. Y RNC
1.When the value of [PARA]ST[/PARA] in [MML]ADD ATMTRF[/MML] is set to CBR, the rate unit should be set; when the value of [PARA]UT[/PARA] is selected, the peak rate should be set. 2.When the value of [PARA]ST[/PARA] in [MML]ADD ATMTRF[/MML] is set to UBR_PLUS, the rate unit should be set; when the value of [PARA]UT[/PARA] is selected, the minimum rate should be set. 3.When the value of [PARA]ST[/PARA] in [MML]ADD ATMTRF[/MML] is set to RTVBR or NRTVBR, the rate unit should be set; when the value of [PARA]UT[/PARA] is selected, the peak rate and the average rate should be set. Not involved Not involved Restriction: [PARA]StaBlkNum5A[/PARA] >= on the UE in idle mode) N (no impact [PARA]Thd5A[/PARA] Not involved None N (no impact on the UE in idle mode) Not involved This paramter is valid only when [PARA]DynShutdownSwitch[/PARA] is set to ON_1 orinvolved ON_3. N (No impact on the UE in idle mode) Not ON_2 or This paramter is valid only when [PARA]DynShutdownSwitch[/PARA] is set to ON_2 orinvolved N (No impact on the UE in idle mode) Not ON_3. This paramter is valid only when [PARA]DynShutdownSwitch[/PARA] is set to ON_3. involved N (No impact on the UE in idle mode) Not None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]DPCT[/PARA] is set to IUCS, IUPS, IUR, IUCS_RANAP, or IUCS_ALCAP, this parameter is valid. Y RNC None Not involved Not involved None N (No impact on the UE in idle mode) Not involved This parameter must satisfy the followingimpact on the [PARA]STREAMMBR[/PARA] >= [PARA]STREAMGBR[/PARA]. N (No relationship: UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter must satisfy the followingimpact on the [PARA]STREAMMBR[/PARA] >= [PARA]STREAMGBR[/PARA]. N (No relationship: UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None
Not involved
This paramter is valid only when [PARA]TxDiversityInd[/PARA] is set to TRUE. This parameter is valid only when [PARA]TxDiversityInd[/PARA] is set to TRUE.
Cell
None N (No impact on the UE in idle mode) Not involved When the value of [PARA]FPMUXSWITCH[/PARA] UE[MML]ADD IPPATH[/MML] is set tomode) N (no impact on the in in connected mode and theNot involved UE in idle YES,this parameter is valid. None Not involved Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
When [PARA]CNProtclVer[/PARA](No[MML]ADD CNNODE[/MML] is set to R99, setinvolved N in impact on the UE in idle mode) Not SupportCRType to CR527_SUPPORT or CR527_NO None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]SM[/PARA] in [MML]SET TZ[/MM Y RNC None Not involved Not involved None Not involved Not involved When [PARA]CNDomainId[/PARA] in [MML]ADD CNNODE[/MML] is set to CS_DOMAIN, Switch3GPP25415CR0125 needs to be set. N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]SM[/PARA] in [MML]SET TZ[/MM Y RNC None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None None None None None None None None None None None None None None None None None None None None None None None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved RNC RNC RNC RNC RNC RNC RNC RNC RNC Not involved Not involved Not involved Not involved Not involved Not involved Not involved
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
T314 should be set greater than T302*N302 N (No impact on the UE in idle mode)
Not involved
T315 should be set greater than T302*N302 N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved T3212 needs to be set when [PARA]CNDomainId[/PARA] in [MML]ADD CNDOMAIN[/MML] is set to CS_DOMAIN; T3212 does not need N (Changing the time for the UE in idle mode to initiate periodical location update) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) RNC None N (No impact on the UE in idle mode) RNC None N (No impact on the UE in idle mode) RNC None N (No impact on the UE in idle mode) RNC None N (no impact on the UE in idle mode) Not involved
None
Not involved
None
Not involved
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved
None
Not involved
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved
None
Not involved
None None
None
Not involved
Not involved
This paramter is valid only when [PARA]TFsNumber[/PARA] is set to D2 or D3. Not involved This paramter is valid only when [PARA]TFsNumber[/PARA] is set to D3. Not involved
1.[PARA]TbSizeIndex1[/PARA] < [PARA]TbSizeIndex2[/PARA] < [PARA]TbSizeIndex3[/PARA] < [PARA]TbSizeIndex4[/PARA] N (No impact on the UE in idle mode) Not involved
1.[PARA]TbSizeIndex1[/PARA] < [PARA]TbSizeIndex2[/PARA] < [PARA]TbSizeIndex3[/PARA] < [PARA]TbSizeIndex4[/PARA] N (No impact on the UE in idle mode) Not involved
1.[PARA]TbSizeIndex1[/PARA] < [PARA]TbSizeIndex2[/PARA] < [PARA]TbSizeIndex3[/PARA] < [PARA]TbSizeIndex4[/PARA] N (No impact on the UE in idle mode) Not involved
1.[PARA]TbSizeIndex1[/PARA] < [PARA]TbSizeIndex2[/PARA] < [PARA]TbSizeIndex3[/PARA] < [PARA]TbSizeIndex4[/PARA] N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None Y Cell This paramter is valid only when [PARA]CellChoice[/PARA]idle mode) N (No impact on the UE in is set to 3GCELL. Not involved None N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]UseOfHcs[/PARA] parameter is set to USED but not required when the [PARA]UseOfHcs[/PARA N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]UseOfHcs[/PARA] parameter is set to USED but not required when the [PARA]UseOfHcs[/PARA N (No impact on the UE in idle mode) Not involved This parameter is valid only when N(impact on Cell Selection andset to CONFIGURED. in idle mode) [PARA]NonhcsInd[/PARA] is Reselection of the UE involved Not This parameter is valid only when N(impact on Cell Selection andset to CONFIGURED. in idle mode) [PARA]NonhcsInd[/PARA] is Reselection of the UE involved Not
N (No impact on the UE in idle mode) Not involved Not involved Not involved
This parameter is valid when [PARA]TpenaltyHcsReselect[/PARA] is not set to D0. this parameter is, the lower the possibility for the UE to sel N(For the UE in idle mode, the larger the value of Not involved
This parameter is valid when [PARA]TpenaltyHcsReselect[/PARA] is not set to D0. this parameter is, the lower the possibility for the UE to sel N(For the UE in idle mode, the larger the value of Not involved
Valid when [PARA]ChoiceRptUnitForAmrE[/PARA] is set to TEN_MSEC N (no impact on the UE in idle mode)
Not involved
Valid when [PARA]ChoiceRptUnitForBeE[/PARA] is UE to TEN_MSEC N (no impact on the set in idle mode)
Not involved
Valid when [PARA]ChoiceRptUnitForBeF[/PARA] is UE to TEN_MSEC N (no impact on the set in idle mode)
Not involved
This parameter is valid only when [PARA]ChoiceRprtUnitForDlBa sicMeas[/PARA] is set to TEN_MSEC,and it must satisfy the following relationship: [PARA]TenMsecForDlBasicMe as[/PARA] < [PARA]IntraFreqLdbPeriodTime rLen[/PARA] x 1000/2 (See [MML]SET LDCPERIOD[/MML] and [MML]SET SATLDCPERIOD[/MML]); [PARA]TenMsecForDlBasicMe as[/PARA] < [PARA]PucPeriodTimerLen[/PA RA] x 1000/2 (See [MML]SET LDCPERIOD[/MML] and [MML]SET SATLDCPERIOD[/MML]); [PARA]TenMsecForDlBasicMe as[/PARA] < [PARA]LdrPeriodTimerLen[/PA RA] x 1000/2 (See [MML]SET LDCPERIOD[/MML] and [MML]SET SATLDCPERIOD[/MML]); [PARA]TenMsecForDlBasicMe as[/PARA] < [PARA]OlcPeriodTimerLen[/PA RA]/2 (See [MML]SET LDCPERIOD[/MML] and N (No impact on the UE in idle mode) [MML]SET
Not involved
This parameter is valid only when N (No impact on the UE in idle mode) [PARA]ChoiceRprtUnitForDlOlcMeas[/PARA] is Not to TEN_MSEC. set involved
This parameter is valid only when N (No impact on the UE in idle mode) [PARA]ChoiceRprtUnitForHsdpaRateMeas[/PARA] isinvolved Not set to TEN_MSEC.
This parameter is valid only when N (No impact on the UE in idle mode) [PARA]ChoiceRprtUnitForHsdpaPwrMeas[/PARA] is involved Not set to TEN_MSEC. This parameter is valid only when N (No impact on the UE in idle mode) [PARA]ChoiceRprtUnitForHsupaRateMeas[/PARA] isinvolved Not set to TEN_MSEC.
This parameter is valid only when [PARA]ChoiceRprtUnitForUlBa sicMeas[/PARA] is set to TEN_MSEC,and it must satisfy the following relationship: [PARA]TenMsecForUlBasicMe as[/PARA] < [PARA]LdrPeriodTimerLen[/PA RA] * 1000/2 (See [MML]SET LDCPERIOD[/MML] and [MML]SET SATLDCPERIOD[/MML]); [PARA]TenMsecForUlBasicMe as[/PARA] < [PARA]OlcPeriodTimerLen[/PA RA] /2 (See [MML]SET LDCPERIOD[/MML] and [MML]SET SATLDCPERIOD[/MML]) . This parameter is valid only when [PARA]ChoiceRprtUnitForUlBa sicMeas[/PARA] is set to TEN_MSEC,and it must satisfy the following relationship: [PARA]TenMsecForUlBasicMe as[/PARA] < [PARA]LdrPeriodTimerLen[/PA RA] x 1000/2; [PARA]TenMsecForUlBasicMe as[/PARA] < [PARA]OlcPeriodTimerLen[/PA N (No impact on the UE in idle mode) RA]/2.
Not involved
This parameter is valid only when N (No impact on the UE in idle mode) [PARA]ChoiceRprtUnitForUlOlcMeas[/PARA] is Not to TEN_MSEC. set involved
Valid when [PARA]ChoiceRptUnitForVpE[/PARA] isUE in idle mode) N (no impact on the set to TEN_MSEC
Not involved
The value of the parameter must satisfy the function below: [PARA]NFastSpdEst[/PARA]*[ PARA]TSlowSpdEst[/PARA] >= [PARA]NSlowSpdEst[/PARA]*[ PARA]TFastSpdEst[/PARA].
Not involved
This parameter is valid only when Not involved [PARA]SlotFormat[/PARA] is equal to or more than D8. Not involved
None Not involved Not involved None Not involved Not involved Restriction: [PARA]StaBlkNum5A[/PARA] >= on the UE in idle mode) N (no impact [PARA]Thd5A[/PARA] Not involved Restriction: [PARA]ThdEa[/PARA] (no [PARA]ThdEb[/PARA] mode) N <= impact on the UE in idle Not involved Restriction: [PARA]ThdEa[/PARA] (no [PARA]ThdEb[/PARA] mode) N <= impact on the UE in idle Not involved This parameter, [PARA]TrafficClass[/PARA], [PARA]UserPriority[/PARA], and [PARA]SPI[/PARA] form an SPI mapping table. This param N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]TrafficClass[/PARA]mode) N (No impact on the UE in idle parameter is set toNot involved INTERACTIVE; The mapping relationship between the tr None Not involved Not involved None Not involved Not involved This paramter is valid only when [PARA]Priority(BLK CELL)[/PARA] is set to NORMAL. Not involved Not involved None Y AAL2 Path None Not involved Not involved
None N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is se N (No impact on the UE in idle mode) Not involved
This parameter is valid when [PARA]InterFreqReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode) Not involved
None
Not involved
None
Not involved
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to PERIODICAL_REPORTING. N (No impact on the UE in idle mode) Not involved
This parameter is valid when [PARA]InterFreqReportMode[/PARA] is set to PERIODICAL_REPORTING. N (No impact on the UE in idle mode) Not involved
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to PERIODICAL_REPORTING. N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is se N (No impact on the UE in idle mode) Not involved This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is se N (No impact on the UE in idle mode) Not involved None Not involved Not involved The TRMMAP index is configured by setting the value UE[PARA]TMI[/PARA] in [MML]ADD TRMMAP[/MML]. N (No impact on the of in idle mode) Not involved The TRMMAP index is configured by setting the value UE[PARA]TMI[/PARA] in [MML]ADD TRMMAP[/MML]. N (No impact on the of in idle mode) Not involved The TRMMAP index is configured by setting the value UE[PARA]TMI[/PARA] in [MML]ADD TRMMAP[/MML]. N (No impact on the of in idle mode) Not involved None N (No impact on the UE in idle mode) RNC None N (No impact on the UE in idle mode) RNC
1. If the NodeB is configured with the NCP through [MML]ADD NCP[/MML] or configured with the CCP through [MML]ADD CCP[/MML], the transmission type cannot be modified. 2. If a NodeB OM channel is set up, the transmission type cannot be modified. 3. If the NodeB is configured with adjacent nodes through [MML]ADD NCP[/MML], the transmission type cannot be modified. 4. If the NodeB is configured with the electrical serial number through [MML]ADD NODEBESN[/MML] and the transmission type is supposed to be modified to ATM transmission, the transmission type cannot be modified. Y NodeB None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES, the adjust method should be set. Y RNC
None
Not involved
None N (No impact on the UE in idle mode) Not involved This paramter is valid only when [PARA]DynShutDownType[/PARA] is set to ConditionalShutDown. N (No impact on the UE in idle mode) Not involved
None
Not involved
Not involved
None None
N(For the UE in idle mode, the larger the value of this parameter is, the smaller the Ping-Pong effect in the ce Not involved N (No impact on the UE in idle mode) Not involved
This parameter, [PARA]UserPriority[/PARA], [PARA]THP[/PARA], and [PARA]SPI[/PARA] form an SPI mapping table.
Not involved
None
Not involved
None
Not involved
Not involved
None None None When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB, IUR or IUCS, this parameter is valid. When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB_IUR_IUCS, this parameter is valid. When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to IUB, IUR, IUCS, or IUPS, this parameter is valid.
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved
Not involved
Not involved
Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None
Not involved
N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved N(impact on Cell Selection and Reselection of the UE in idle mode) Not involved Not involved Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode) Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) Not involved Not involved
Not involved Not involved Not involved Not involved Not involved
None Not involved Not involved None N (No impact on the UE in idle mode) Not involved This paramter is valid only when [PARA]CellChoice[/PARA]idle mode) N (No impact on the UE in is set to 3GCELL. Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved When the value of [PARA]BT[/PARA] in [MML]LOP E1T1[/MML] is set to AEUa Cell Y or PEUa, the value of [PARA]TS[/PARA] should be set. When the value of [PARA]BT[/PARA] in [MML]SET E1T1[/MML] is set to AEUa,Not value of [PARA]LS[/PARA] in [MML]SET E1T1[/M Not involved the involved
1.The time slot 0 can not be configured. 2.When the value of [PARA]BRDTYPE[/PARA] in [MML]ADD PPPLNK[/MML]is set to PEUa, the value of[PARA]TSBITMAP[/PARA] must be set. 3.When the value of [PARA]BRDTYPE[/PARA] in [MML]ADD MPLNK[/MML]is set to PEUa, the value of[PARA]TSBITMAP[/PARA] must be set. Not involved None N (No impact on the UE in idle mode) None Not involved The value of the parameter must satisfy the function below: [PARA]NFastSpdEst[/PARA]*[ PARA]TSlowSpdEst[/PARA] >= [PARA]NSlowSpdEst[/PARA]*[ PARA]TFastSpdEst[/PARA].
N (No impact on the UE in idle mode) Not involved This parameter is valid when [PARA]TstSwitch[/PARA] isin idle ON. N (No impact on the UE set to mode) Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved When the value of [PARA]STPMODE[/PARA] in [MML]STR CPUUSAGETST[/MML] is set to YES, this parameter is valid. Y Subsystem None Not involved Not involved None Not involved Not involved None N (No impact on the UE in idle mode) Not involved When [PARA]GRPT[/PARA] in [MML]ADD RSCGRP[/MML] is set to ATM or [PARA]BWMODE[/PARA] is set to FULL_DUPLEX, this N (No impact on the UE in idle mode) Not involved
1.When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATMLGCPORT, this parameter is required. 2.When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATMLGCPORT, this parameter is required. When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid. When the value of [PARA]CARRYT[/PARA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCPORT, this parameter is valid. None
None
Cell
When [PARA]UARFCNUplinkInd[/PARA] is set to TRUE, this parameter need to manual configure;or else need to automatic configure with t Y Cell
None Y Cell None N (No impact on the UE in idle mode) Not involved When the value of [PARA]UDPMUXMODRECV[/PARA]in idle mode) N (No impact on the UE in [MML]ADD IPPATH[/MML] is set to RTPCOMP, this parameter is valid. Not involved When the value of [PARA]ITFT[/PARA]impact on the UEIPPATH[/MML] is set to IUCS, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved When the value of [PARA]ITFT[/PARA]impact on the UEIPPATH[/MML] is set to IUCS, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved When the value of [PARA]UDPMUXMODRECV[/PARA]in idle mode) N (No impact on the UE in [MML]ADD IPPATH[/MML] is set to RTPCOMP, this parameter is valid. Not involved None N (no impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved When the value of [PARA]BT[/PARA] in [MML]STR E1T1TST[/MML] is set to AEUa involved this parameter is valid. Not involved Not or PEUa, None Not involved Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None N (no impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved
None
Not involved
If this parameter is set through both the [MML]SETthe UE in idle mode) N (No impact on FRCCHLTYPEPARA[/MML] and [MML]ADD CELLFRC[/MML] commands, the param Not involved This parameter can be used for selection of the initial rate for BE services only when the DCCC_SWITCH under the [PARA]Chswitch[/PARA] N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None None
N (no impact on the UE in idle mode) N (No impact on the UE in idle mode)
None The value of this parameter must satisfy the following relationship: [PARA]UlOlcTrigThd[/PARA]( See [MML]ADD CELLLDM[/MML]) >= [PARA]UlCellTotalThd[/PARA] ; [PARA]UlCellTotalThd[/PARA] > [PARA]UlNonCtrlThdForHo[/P ARA] .
Not involved
Not involved
None
Not involved
None
Not involved
None N (No impact on the UE in idle mode) When the value of UlMidRateCalc is HAND_APPOINT,the following relationship must be satisfied: [PARA]UlDcccRateThd[/PARA ] <= [PARA]UlMidRateThd[/PARA]. N (no impact on the UE in idle mode) None N (No impact on the UE in idle mode)
Not involved
This parameter is available if the value of [PARA]BEQosPerform[/PARA] in [MML]SET QOSACT[/MML] is YES. N (no impact on the UE in idle mode) Not involved For the BE users with the same [PARA]TrafficClass[/PARA], [PARA]THPClass[/PARA] and [PARA]BearType[/PARA] values, make sure: [PARA]UlGBR[/PARA] of GOLD users ([PARA]UserPriority[/PARA] is set to GOLD) >= [PARA]UlGBR[/PARA] of SILVER users ([PARA]UserPriority[/PARA] is set to SILVER) >= [PARA]UlGBR[/PARA] of COPPER users ([PARA]UserPriority[/PARA] is set to COPPER). N (No impact on the UE in idle mode)
Not involved
The value of this parameter must satisfy the following relationship: [PARA]UlHoCeResvSf[/PARA] >= [PARA]UlLdrCreditSfResThd[/ PARA] .
N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None
Not involved
The value of this parameter must not (Nolarger than [PARA]UlHoCeResvSf[/PARA].Not involved N be impact on the UE in idle mode) None N (No impact on the UE in idle mode) Not involved
None
Not involved
None
Not involved
None
Not involved
None The value of this parameter must satisfy the following relationship: [PARA]UlLdrTrigThd[/PARA] >= [PARA]UlLdrRelThd[/PARA]; [PARA]UlOlcRelThd[/PARA] >= [PARA]UlLdrRelThd[/PARA].
Not involved
Not involved
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None
Not involved
None
Not involved
The value of this parameter must satisfy the following relationship: [PARA]UlLdrTrigThd[/PARA] >= [PARA]UlLdrRelThd[/PARA]; [PARA]UlOlcTrigThd[/PARA] > [PARA]UlLdrTrigThd[/PARA]; [PARA]UlNonCtrlThdForOther[ /PARA](See [MML]ADD CELLCAC[/MML]) >= [PARA]UlLdrTrigThd[/PARA]. N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode)
None N (no impact on the UE in idle mode) Not involved The parameter is valid when [PARA]UlRateUpAdjLevel[/PARA]mode) N (no impact on the UE in idle in [MML]SET DCCC[/MML] is set to 3_Rates, or [PARA]UlRateDnAdjLev Not involved The parameter is valid when [PARA]UlMidRateCalc[/PARA] in [MML]SET DCCC[/MML] is set to HAND_APPOINT, and the following relationship must be satisfied: [PARA]UlDcccRateThd[/PARA ] <= [PARA]UlMidRateThd[/PARA]. N (no impact on the UE in idle mode) Not involved The following relationship must be satisfied: [PARA]UlModeChangeTimerLe n[/PARA] <= [PARA]DlModeChangeTimerLe n[/PARA]. N (no impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. Not involved
The value of this parameter must satisfy the following relationship: [PARA]UlNonCtrlThdForHo[/P ARA] > [PARA]UlNonCtrlThdForAMR[ /PARA]; [PARA]UlNonCtrlThdForAMR[ /PARA] > [PARA]UlNonCtrlThdForOther[ /PARA].
Not involved
The value of this parameter must satisfy the following relationship: [PARA]UlCellTotalThd[/PARA] > [PARA]UlNonCtrlThdForHo[/P ARA] ; [PARA]UlNonCtrlThdForHo[/P ARA] > [PARA]UlNonCtrlThdForAMR[ /PARA]; [PARA]UlNonCtrlThdForHo[/P ARA] > [PARA]UlNonCtrlThdForNonA MR[/PARA] .
Not involved
The value of this parameter must satisfy the following relationship: [PARA]UlNonCtrlThdForHo[/P ARA] > [PARA]UlNonCtrlThdForNonA MR[/PARA]; [PARA]UlNonCtrlThdForNonA MR[/PARA] > [PARA]UlNonCtrlThdForOther[ /PARA].
Not involved
The value of this parameter must satisfy the following relationship: [PARA]UlNonCtrlThdForAMR[ /PARA] > [PARA]UlNonCtrlThdForOther[ /PARA]; [PARA]UlNonCtrlThdForNonA MR[/PARA] > [PARA]UlNonCtrlThdForOther[ /PARA]; [PARA]UlNonCtrlThdForOther[ /PARA] >= [PARA]UlLdrTrigThd[/PARA].
N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode)
None
Not involved
None None The value of this parameter must satisfy the following relationship: [PARA]UlOlcTrigThd[/PARA] >= [PARA]UlOlcRelThd[/PARA]; [PARA]UlOlcRelThd[/PARA] >= [PARA]UlLdrRelThd[/PARA].
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
The value of this parameter must satisfy the following relationship: [PARA]UlOlcTrigThd[/PARA] > [PARA]UlLdrTrigThd[/PARA]; [PARA]UlOlcTrigThd[/PARA] >= [PARA]UlOlcRelThd[/PARA]; [PARA]UlOlcTrigThd[/PARA] >= [PARA]UlNonCtrlThdForHo[/P ARA](See [MML]ADD CELLCAC[/MML]). N (No impact on the UE in idle mode)
Not involved
None
Not involved
None
Not involved
Valid when [PARA]AMRQosPerform[/PARA] is set to YES idle mode) N (no impact on the UE in Valid when [PARA]AMRQosPerform[/PARA] is set to YES idle mode) N (no impact on the UE in Valid when [PARA]AMRQosPerform[/PARA] is set to YES idle mode) N (no impact on the UE in
None N (No impact on the UE in idle mode) Valid when [PARA]VPQosPerform[/PARA] is set theYES in idle mode) N (no impact on to UE Valid when [PARA]AMRQosPerform[/PARA] is set to YES idle mode) N (no impact on the UE in Valid when [PARA]AMRQosPerform[/PARA] is set to YES idle mode) N (no impact on the UE in Valid when [PARA]AMRQosPerform[/PARA] is set to YES idle mode) N (no impact on the UE in None N (no impact on the UE in idle mode) None N (no impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved Not involved Not involved
None N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to NOPRIORITY. involved Not None N (No impact on the UE in idle mode) Not involved This parameter is valid only when N (No impact on the UE in idle mode) [PARA]AFSetObj[/PARA] is set to GGOLD, SILVER, or COPPER. Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
Restriction: [PARA]UlThd6A1[/PARA] impact on the UE in idle mode) N (no <= [PARA]UlThd6B1[/PARA] Restrictions: 1) [PARA]UlThd6A2[/PARA] <= [PARA]UlThd6B2[/PARA]; 2) [PARA]UlThd6A2[/PARA] > [PARA]UlThd6B1[/PARA] N (no impact on the UE in idle mode)
Not involved
Not involved
Restrictions: 1) [PARA]UlThd6A1[/PARA] <= [PARA]UlThd6B1[/PARA]; 2) [PARA]UlThd6A2[/PARA] > [PARA]UlThd6B1[/PARA] N (no impact on the UE in idle mode) Not involved Restriction: [PARA]UlThd6A2[/PARA] impact on the UE in idle mode) N (no <= [PARA]UlThd6B2[/PARA] Not involved None N (No impact on the UE in idle mode) Not involved This parameter can only be set to 1N (No impact on the UE in idle mode) parameter Not involved when the [PARA]PwrCtrlAlg[/PARA] is set to ALGORITHM2.
None
Not involved
None
Not involved
None
Not involved
Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_CENTER N (no impact on the BOTH or mode)
Not involved
Valid when [PARA]CellLocCfgType[/PARA] is set to UE in idle CELL_CENTER N (no impact on the BOTH or mode) Valid when [PARA]CellLocCfgType[/PARA ] is set to BOTH or CELL_CENTER; [PARA]UncertSemiMajor[/PAR A]>=[PARA]UncertSemiMinor[/ PARA]. N (no impact on the UE in idle mode)
Not involved
Not involved
N (no impact on the UE in idle mode) Valid when [PARA]CellLocCfgType[/PARA ] is set to BOTH or CELL_CENTER; [PARA]UncertSemiMajor[/PAR A]>=[PARA]UncertSemiMinor[/ PARA]. N (no impact on the UE in idle mode) Valid when [PARA]CellLocCfgType[/PARA ] is set to BOTH or CELL_CENTER; [PARA]UncertSemiMajor[/PAR A]>=[PARA]UncertSemiMinor[/ PARA].
Not involved
Not involved
N (no impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved The value of this parameter must be smaller thanon the UE of the [PARA]RecountingPeriod[/PARA] parameter under the [MML]SET RNCMB N (No impact the value in idle mode) Not involved When the value of [PARA]IsROOTNODE[/PARA] in [MML]ADD ADJNODE[/MML] is set to NO, this parameter is valid. Not involved Not involved When [PARA]ISFIRSTCLASSE[/PARA] in [MML]ADD RSCGRP[/MML] is set toNot involved Not involved NO, this parameter is valid. None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved
None None
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML ]. This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML ] and [PARA]MeasQuantityOf3A[/PA RA] is CPICH_EC/NO or AUTO.
Not involved
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML ]. This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML ] and [PARA]MeasQuantityOf3A[/PA RA] is CPICH_RSCP or AUTO.
Not involved
This parameter is valid when [PARA]InterRatReportMode[/PARA] in [MML]SET INTERRATHOCOV[/MML] or [MML]ADD CELLINTER N (No impact on the UE in idle mode) Not involved
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved
This parameter is valid when the OVERLAY_SWITCHUEONidle mode) N (No impact on the is in The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET COR Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
This parameter, [PARA]TrafficClass[/PARA], [PARA]THP[/PARA], and [PARA]SPI[/PARA] form an SPI mapping table.
N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] AAL2to UNI, IMA, FRAATM, NCOPT, or ATM logic po Y is set Path When the value of [PARA]LNKT[/PARA] in [MML]ACT VCLCC[/MML] is set to SAALLNK, AAL2PATH, or IPOAPVC, the VCL activati Not involved Not involved
This parameter determines whether the parameter [PARA]VLANID[/PARA] in [MML]ADD SCTPLNK[/MML]bears Y Services that the SCTP link is valid. When the value of [PARA]VLANFlAG[/PARA] in [MML]ADD IPPATH[/MML] is set to ENABLE, this parameter is valid. When the value of [PARA]VLANFlAG[/PARA] in [MML]ADD SCTPLNK[/MML] is set to ENABLE, this parameter is valid. Not involved
Not involved
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR or IUCS, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
When the value of [PARA]ITFT[/PARA]impact on the UETRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No in [MML]ADD in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved
None N (No impact on the UE in idle mode) Not involved None N (No impact on the UE in idle mode) Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved None Not involved Not involved When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] AAL2to UNI, IMA, FRAATM, NCOPT, or ATM logic po Y is set Path
None N (No impact on the UE in idle mode) None N (no impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) None N (No impact on the UE in idle mode) Valid when [PARA]AMRQosPerform[/PARA] is set to YES idle mode) N (no impact on the UE in None Not involved
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
None
Not involved
None None
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
None Not involved Not involved None Not involved Not involved When the value of [PARA]BT[/PARA] in [MML]SET E1T1[/MML] is set to AEUa/PEUa and the value of [PARA]LS[/PARA] is set to ALL,t Not involved Not involved When the value of [PARA]RT[/PARA] in [MML]SET MSP[/MML] is set to REVERTIVE, the recovery time should be set. Not involved Not involved This parameter defines an offset relative to the [PARA]NCountingThd[/PARA] parameter. N (No impact on the UE in idle mode) Not involved None N (no impact on the UE in idle mode) Not involved None Y RNC
Interruption Duration(min) Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
Caution
Access
Attribute
The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Radio
This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Less than 10 minutes Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Equipment The deleting operation can be done three minutes after ADD GPS operation. Read & Write Equipment CPU usage to be increased. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The deleting operation can be done three minutes after ADD GPS operation. Read & Write Equipment
1. The AGPS reference receiver can be added to an RNC or a NodeB according to [AGPS type]. If the AGPS type is RNC, the AGPS reference receiver is added to the RNC. If the AGPS type is NodeB, the AGPS reference receiver is added to the NodeB. 2. One RNC can be configured with one AGPS reference receiver at most while one NodeB can be configured with five AGPS reference receivers at most. 3.If the AGPS reference receiver is configured in the RNC, the AGPS reference receiver must be integrated on the clock card. 4. If the AGPS reference receiver is added to a NodeB, the ID of the home cell of the AGPS reference receiver must be specified, and this cell must have been configured. 5. If the AGPS reference recevier is added to an NRNC, the ID of the home RNC of the AGPS reference receiver must be Read & Write Equipment specified and this NRNC The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter cannot be modified. Write Read & Equipment The parameter cannot be modified. Write Read & Equipment The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment
The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved This parameter cannot be modified. Write Read & Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved This parameter cannot be modified. Write Read & Equipment Service not interrupted, but CPU will be highcannot be modified. Write This parameter Read & Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio
Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Interrupt the service until the In ordergateway is this or the Readswapping or the changing of [MML]STP IPCHK[/MML] first and [MML]STR IP correct to modify set parameter, you must use the command IP route is finished. port & Write Transport Not involved In order to modify this parameter, you must use the command [MML]STP IPCHK[/MML] first and [MML]STR IP Read & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Equipment Not involved If the transport type of the NodeB & IUB-IP, the next hop Equipment must be one of the following configured addr Read is Write IP address Not involved If the transport type of the NodeB & IUB-IP, the next hop Equipment must be one of the following configured addr Read is Write IP address Not involved The modification of ATT is valid only when [PARA]CNDomainId[/PARA] in [MML]ADD CNDOMAIN[/MML] Read & Write Radio
Interrupt the service until negotiate successfully again. Read & Write the parameter is set the same with the local and peer device. The negotiation will be successful only when Transport
Interrupt the service until negotiate successfully again. Read & Write the parameter is set the same with the local and peer device. The negotiation will be successful only when Transport
Interrupt the service until negotiate successfully again. Read & Write the parameter is set the same with the local and peer device. The negotiation will be successful only when Transport
Not involved
The negotiation will be successful & Write the parameter is set the same with the local and peer device. Read only when Transport
If the mode is not consistent, The modification may affect Read & Write port, may interrupt service temply. If the modification is not consistent will interrupt service until it is consistent. the state of the Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Equipment Not involved This parameter cannot be modified. Write Read & Equipment Less than 5 minutes Each 8 kHz clock of the backplane& Write Read corresponds to only one clock source. The same 8 kHz clock switch of the back Equipment Less than 5 minutes Each 8 kHz clock of the backplane& Write Read corresponds to only one clock source. The same 8 kHz clock switch of the back Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Equipment Not involved In order to modify this parameter, you must use the command [MML]STP IPCHK[/MML] first and [MML]STR IP Read & Write Transport Not involved In order to modify this parameter, you must use the command [MML]STP IPCHK[/MML] first and [MML]STR IP Read & Write Transport Not involved This parameter cannot be modified. Write Read & Equipment Not involved This parameter cannot be modified. Write Read & Equipment
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Equipment This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport
Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved This parameter cannot be modified. Write Read & Equipment Less than 5 minutes None Read & Write Transport Not involved This parameter cannot be modified. Write Read & Transport Service not interrupted, but CPU will be highcannot be modified. Write This parameter Read & Equipment Less than 5 minutes This parameter cannot be modified. Write Read & Equipment Not involved If a link is used, you cannot convert the link from E1 to T1, or from T1 to E1. Read & Write Equipment Not involved This parameter cannot be modified. Write Read & Equipment Not involved This parameter cannot be modified. Write Read & Transport Not involved This parameter cannot be modified. Write Read & Equipment Not involved This parameter cannot be modified. Write Read & Transport Not involved The auto adjust bandwidth parameterWrite enabled only Transport IPPATH over the logic port activate the IPPM Read & can be when the
Not involved
The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < fo Read & Write Transport
The parameter modification has no impact on the equipment. Read & Write Transport This parameter cannot be modified. Write Read & Transport
Not involved
The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write
Transport
Not involved
Transport
Not involved
The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write
Transport
Not involved
The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < fo Read & Write Transport
The parameter modification has no impact on the equipment. Read & Write Transport This parameter cannot be modified. Write Read & Transport
Not involved
The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write
Transport
Not involved
Transport
Not involved
The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write
Transport
Not involved
The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < fo Read & Write Transport
The parameter modification has no impact on the equipment. Read & Write Transport This parameter cannot be modified. Write Read & Transport
Not involved
The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write
Transport
Not involved
Transport
The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Less than 5 minutes Less than 5 minutes
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Transport
Not involved
Transport
This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read &
Transport Transport
This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read &
Equipment Transport
This parameter is the bearing slot number and cannot be modified. Read & Write Equipment This parameter is the bearing subrack number and cannot Equipment Read & Write be modified. This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport
The parameter modification has no impact on the equipment. Read & Write Transport
Not involved
Transport
The services are interrupted until the SAAL link is working normally. with that of the Transport The configuration data must Read & Write be consistent peer end.
The services are interrupted until the SAAL link is working normally. with that of the Transport The configuration data must Read & Write be consistent peer end.
Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Transport This parameter cannot be modified. Write Read & Radio
1. Cell ID is in one-to-one correspondence with Service Area Identity (SAI). 2. SAI = PLMN + LAC + SAC. PLM Read & Write Equipment After running the [MML]ADD CBSADDR[/MML] command to add the CBS server address, you should not set th Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport Modifying this parameter does not& Write existing SAAL link but may affect the next setup of the SAAL link. Read affect the Transport This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment
The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment
The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment
The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write
Radio
Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Radio When the network is in poor Read & Write the number of detection times cannot be set to a small value. If the val running status, Transport The parameter modification has no impact on the equipment. Read & Write Radio
Not involved This parameter cannot be modified. Write Read & Transport The services are interrupted until the SCTP link is working normally. The checksum calculation should be Write Read & negotiated with the peer end, as described in RFC4960. The CRC32 is recomm Transport The services are interrupted until the SCTP link is working normally. The checksum calculation should be Write Read & negotiated with the peer end, as described in RFC4960. The CRC32 is recomm Transport The services are interrupted until the SCTP link is working normally. The checksum calculation should be Write Read & negotiated with the peer end, as described in RFC4960. The CRC32 is recomm Transport
Not involved Not involved Not involved Not involved Not involved Not involved
Transport
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write
Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Transport Less than 10 minutes If the clock board type is changed & Write Read from GCGa to GCUa, the clock board should not be configured with GPS. Equipment The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
Radio
Not involved Not involved Not involved Not involved Not involved Not involved
The CN indexes of the same Read & even the different CN domain cannot be the same. When the Iu-Flex function PLMN Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Radio When the Iu-Flex function isRead & Write used, the protocol version ofEquipment each CN node must be R5 or later.The parameter modifi The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio For parameter modification, Read to ITU-T Q.2110. refer & Write Transport For parameter modification, Read to ITU-T Q.2110. refer & Write Transport For parameter modification, Read to ITU-T Q.2110. refer & Write Transport This parameter can be addedRead & Write cannot be removed. or modified but Transport This parameter can be addedRead & Write cannot be removed. or modified but Transport This parameter can be addedRead & Write cannot be removed. or modified but Transport This parameter can be addedRead & Write cannot be removed. or modified but Transport
Not involved
This parameter can be addedRead & Write cannot be removed. or modified but Transport
Not involved Not involved Not involved Not involved Not involved
This parameter can be addedRead & Write cannot be removed. or modified but Transport This parameter can be addedRead & Write cannot be removed. or modified but Transport This parameter can be addedRead & Write cannot be removed. or modified but Transport This parameter can be addedRead & Write cannot be removed. or modified but Transport This parameter can be addedRead & Write cannot be removed. or modified but Transport
Not involved
This parameter can be addedRead & Write cannot be removed. or modified but Transport
This parameter can be addedRead & Write cannot be removed. or modified but Transport The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter is used for power monitor. Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved This parameter is based on actual networking. Read & Write Transport Not involved Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport The parameter modification has no impact on the equipment. Read & Write Equipment
The parameter modification has no impact on the equipment. Read & Write Radio The settings of CsInfoUpdFlag is valid only when the value of [PARA]CsNriCfgMode[/PARA] in [MML]SET OP Read & Write Equipment The settings of CsInfoUpdTmr is valid only when the value of [PARA]CsInfoUpdFlag[/PARA] in [MML]SET OP Read & Write Equipment
When [PARA]CNProtclVer[/PAR A] in [MML]ADD CNNODE[/MML] is set to R5 or any later version, CsNriCfgMode may be set to SUPP_IUFLEX.The parameter modification has no impact on the equipment. When [PARA]CNProtclVer[/PAR A] in [MML]ADD CNNODE[/MML] is set to R6 or any later version, CsNriCfgMode may be set to SUPP_MOCN or SUPP_IUFLEX_MOCN.Th e parameter modification has no impact on the equipment. Read & Write Equipment The settings of CSNRILength is valid only when the value of [PARA]CsNriCfgMode[/PARA] in [MML]SET OPE Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment This parameter cannot be modified. Write Read & Equipment The parameter modification has no impact on the equipment. Read & Write Equipment This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
If the time delay is very large on the line, and the max differ delay is low, Several links can not be activated. Read & Write Transport
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Transport When running this command, ensure Write source IP address and the destination IP address cannot be the local I Read & that the Transport The parameter modification has no impact on the equipment. Read & Write Transport This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter cannot be modified. Write Read & Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Less than 10 minutes Not involved Not involved Not involved Less than 10 minutes
The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Radio None Read & Write Equipment After this parameter is modified, the Write must be reset to take effect. Read & RNC Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio After this parameter is modified, the Write must be reset to take effect. Read & RNC Transport
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write
Radio
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write
Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read &
This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read &
Transport Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
This parameter can be addedRead & Write cannot be removed. or modified but Transport This parameter can be addedRead & Write cannot be removed. or modified but Transport This parameter can be addedRead & Write cannot be removed. or modified but Transport This parameter can be addedRead & Write cannot be removed. or modified but Transport
Not involved
This parameter can be addedRead & Write cannot be removed. or modified but Transport
Not involved
This parameter can be addedRead & Write cannot be removed. or modified but Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio
Not involved The parameter modification has no impact on the equipment. Read & Write Transport Not involved This parameter cannot be modified. Write Read & Equipment Interrupt the service until the The parameter cannot be modified. Write parameter is correctly set. Read & Equipment Not involved This parameter cannot be modified. Write Read & Transport
Not involved This parameter cannot be modified. Write Read & Transport Not involved This parameter cannot be modified. Write Read & Transport Not involved This parameter cannot be modified. Write Read & Transport Not involved This parameter cannot be modified. Write Read & Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio If the mode is not consistent, This interrupt service be consistent & Write peer equipment. The Full mode is recommended. will parameter must until it Read with the is consistent. Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved This parameter cannot be modified. Write Read & Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved This address must be a peer address in normal status, and Transport Read & Write the peer equipment can respond to the PING request. Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
1.You can set the DST start date or end date by setting the StartType or EndType parameter to "DATEWEEK" type. In this case, you must set the benchmark day to (n - 6) or earlier, where n represents the last day of the month. For example, in October, you must set the benchmark day to 25 (= 31 - 6) or earlier. If you set the date to "Tuesday in or after Oct.26", it is invalid in year 2005 for the date exceeds the month scope while in year 2006 it is October 31, a valid day. Therefore, you must abide this specification to ensure the setting is valid in each year. 2. When you set a customized daylight saving time, you cannot set the start date or end date of the daylight saving time to February 29 by setting the StartType or EndType parameter to the DATE type. The reason is that the local time cannot be translated to the daylight Interrupt the service until the parameter is correctly set. Read & Write Equipment saving time in a leap year Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Interrupt the service until the The parameter cannot be modified. Write parameter is correctly set. Read & Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved For parameter modification, Read to ITU-T Q704. refer & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio
Interrupt the service until the The parameter cannot be modified. Write parameter is correctly set. Read & Equipment Not involved This parameter cannot be modified. Write Read & Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved Not involved Not involved Not involved Not involved Not involved Not involved This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport
Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write Transport Not involved The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write Transport Interrupt the service until the The parameter cannot be modified. Write parameter is correctly set. Read & Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio
Not involved The parameter modification has no impact on the equipment. Read & Write Radio Interrupt the service until the The parameter cannot be modified. Write parameter is correctly set. Read & Equipment Interrupt the service until the The parameter cannot be modified. Write parameter is correctly set. Read & Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved None Read & Write Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved This parameter cannot be modified. Write Read & Radio Not involved This parameter cannot be modified. Write Read & Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Transport
Interrupt the service until negotiate successfully again. cause failure in negotiation. Transport Modify this parameter will Read & Write Not involved The parameter modification has no impact on the equipment. Read & Write Radio
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write
Radio
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The IP address of the DHCPRead &must be one of the following addresses configured for the FG2a/GOUa/PEUa/U server Write Transport
The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved The parameter modification has no impact on the equipment. Read & Write Transport Not involved This parameter cannot be modified. Write Read & Transport Not involved The parameter modification has no impact on the equipment. Read & Write Equipment This parameter cannot be modified. In [MML]EXP ELABEL[/MML],& Write Read the [PARA]FN[/PARA] parameter cannot be a space or any of the following ch Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Transport Not involved When this parameter is set toRead & Write can disable theTransport No_HC, you header compress function; when this parameter is set to Not involved This parameter cannot be modified. Write Read & Transport
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport This FACTORTABLE mustRead & Write be already configured. Transport This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment
The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < fo Read & Write Transport This parameter cannot be modified. Write Read & Transport
Not involved
The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write
Transport
Not involved
Transport
Not involved
The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write
Transport
Not involved
The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < fo Read & Write Transport
The parameter modification has no impact on the equipment. Read & Write Transport This parameter cannot be modified. Write Read & Transport
Not involved
The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write
Transport
Not involved
Transport
Not involved
The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write
Transport
Not involved
The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < fo Read & Write Transport
Not involved
This parameter cannot be modified. Write Read & The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write
Transport
Not involved
Transport
Not involved
Transport
Not involved Not involved Not involved Not involved Not involved
The following constraints should be fulfilled separately in forward or backward configurations: Handover reserved bandwidth < Congestion threshold < Congestion clear threshold < Configured bandwidth, or Handover reserved bandwidth = Congestion threshold = Congestion clear threshold = 0. When Transport Resource Group Type is ATM, before comparing with congestion threshold parameter, Configured bandwidth should wipe off the effect of 5 octets ATM protocol header. Read & Write Transport This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Equipment
The parameter modification has no impact on the equipment. Read & Write Equipment Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport
Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Transport
Not involved
Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Not involved Not involved Not involved Not involved Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Not involved Not involved Not involved Not involved Not involved Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport This parameter cannot be modified. Write Read & Transport
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Equipment
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write Radio Not involved This parameter cannot be modified. Write Read & Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Not involved Not involved Not involved Not involved Not involved Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). None Read & Write Equipment None Read & Write Equipment None Read & Write Equipment Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). This parameter cannot be modified. Write Read & Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio For details of the timer, referRead & Write to ITU-T Q.714. The modification is not recommended. Transport For details of the timer, referRead & Write to ITU-T Q.714. The modification is not recommended. Transport When the network is in poor Read & Write the packet size cannot be set to a large value. If the value is too large, t running status, Transport
The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Modifying this parameter does not& Write existing SAAL link but may affect the next setup of the SAAL link. Read affect the Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter value of IgorTmr must be less than the value of [PARA]IntrTmr[/PARA] set in [MML]SET IUTIM Read & Write Equipment
This parameter cannot be modified. Write Read & Transport [IMA ID] is used to identify Read & Write Normally, inTransport the IMA group. one interface board, the sending IMA ID can not be the s
This parameter cannot be modified. Write Read & Transport The protocol version of IMARead &in RNC must be the same with that in the peer device. group Write Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Radio
Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved This parameter cannot be modified. Write Read & Equipment Not involved This parameter cannot be modified. Write Read & Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved None Read & Write Equipment Inhibition period of the boardOnly the OM channel can beRead & Write the logically inhibited board and the other boards, whereas the service c kept between Equipment Not involved For parameter modification, Read to ITU-T Q.2110. refer & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio If the Inter RAT Inter Plmn Ho Allowed is switched off,Neighbor cells belonging to different PLMNs in the inter R Read & Write Radio If the Intra RAT Inter Plmn Ho Allowed is switched off,Neighbor cells belonging to different PLMNs in the intra R Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio The time between deactivate Thisactivate thecannot be modified. Write and parameter port. Read & Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter value of IntrTmr mustWrite Read & be greater than the value of [PARA]IgorTmr[/PARA] set in [MML]SET IUT Equipment This parameter cannot be modified. Write Read & Transport
Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Equipment This parameter must be the same with the local and peer device. Read & Write Transport When this parameter is set toRead & Write can disable theTransport No_HC, you header compress function; when this parameter is set to
This parameter cannot be modified. Write Read & Transport If the transport type of the NodeB & IUB-ATM, the next hop IP address must be the peer IP address of the configu Read is Write Transport If the transport type of the NodeB & IUB-IP, the next hop Transport must be one of the following configured addr Read is Write IP address
The IP address of the NodeBRead & be the one already configured for other NodeBs. It cannot be the same as the I cannot Write Equipment The IP address of the NodeBRead & be the one already configured for other NodeBs. It cannot be the same as the I cannot Write Equipment The parameter modification has no impact on the equipment. Read & Write Transport
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Equipment This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport
Not involved Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved This parameter cannot be modified. Write Read & Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio If the mode is not consistent, The settings of the local end Read & peer end should be consistent. will interrupt service until it is consistent. and the Write Transport If the mode is not consistent, The settings of the local end Read & peer end should be consistent. will interrupt service until it is consistent. and the Write Transport If the mode is not consistent, The settings of the local end Read & peer end should be consistent. will interrupt service until it is consistent. and the Write Transport If the mode is not consistent, The settings of the local end Read & peer end should be consistent. will interrupt service until it is consistent. and the Write Transport If the mode is not consistent, The settings of the local end Read & peer end should be consistent. will interrupt service until it is consistent. and the Write Transport If the mode is not consistent, The settings of the local end Read & peer end should be consistent. will interrupt service until it is consistent. and the Write Transport If the mode is not consistent, The settings of the local end Read & peer end should be consistent. will interrupt service until it is consistent. and the Write Transport If the mode is not consistent, The settings of the local end Read & peer end should be consistent. will interrupt service until it is consistent. and the Write Transport 1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnected with the equipment of other vendors. 1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnected with the equipment of other vendors. 1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnected with the equipment of other vendors. 1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnected with the equipment of other vendors.
Not involved
Transport
Not involved
Transport
Not involved
Transport
Read & Write Transport The value of this parameter should& Write Read be consistent with the peer one. Transport Modifying this parameter may affect Write Read & the sensitivity of SAAL link detection. Transport
In order to modify this parameter, you must use the command [MML]STP IPCHK[/MML] first and [MML]STR IP Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Radio The parameter cannot be modified. Write Read & Equipment The parameter cannot be modified. Write Read & Equipment The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
This parameter cannot be modified. Write Read & This load EQ table must be already configured. Read & Write This load EQ table must be already configured. Read & Write This load EQ table must be already configured. Read & Write
Not involved This parameter cannot be modified. Write Read & Transport Not involved The parameter modification has no impact on the equipment. Read & Write Equipment Not involved This parameter cannot be modified. Write Read & Transport Not involved This parameter cannot be modified. Write Read & Transport Service not interrupted, but CPU will be highcannot be modified. Write This parameter Read & Equipment
Not involved Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Equipment
Not involved
The line code should be consistent& Write interconnected one.HDB3(HDB3 coding) and AMI(AMI coding)is use Read with the Transport
Not involved
Equipment
Transport
The link selection mask should be & Write set according to MTP3 load sharing. If it is not properly set, the MTP3 Read properly Transport The frame structure should be consistent with the interconnected one. Read & Write Transport
This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport The local IP address and the Read IP address must be in the same network segment, and the peer IP address cannot peer & Write Transport This parameter cannot be modified. Write Read & Transport
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write Radio The services are interrupted until the SCTP of bothworking the SCTP are the parameters that should be negotiated with the peer end before mod The addresses link is ends of normally. Read & Write Transport The services are interrupted until the SCTP of bothworking the SCTP are the parameters that should be negotiated with the peer end before mod The addresses link is ends of normally. Read & Write Transport The services are interrupted until the SCTP link is working parameter that should be negotiated with the peer end before modification. The SCTP port number is the normally. Read & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Equipment The services are interrupted until the SCTP link is working normally. This parameter is based on actual networking. Read & Write Transport The services are interrupted until the SCTP link is working normally. This parameter is based on actual networking. Read & Write Transport The services are interrupted until the SCTP link is working normally. This parameter is based on actual networking. Read & Write Transport Not involved The parameter cannot be modified. Write Read & Equipment Not involved The parameter cannot be modified. Write Read & Equipment If the parameter is set to REMOTE_LOOP or LOCAL_LOOP, the services on this link may be interrupted until the link loopback is cancelled. If the uplink is beared by IMAGRP, the IMAGRP must be reset after the loopmode is cancelled. Otherwise, the IMAGRP will be destroied, and cannot services service. The loopback keeps interrupting thebear new until it is cancelled. Write Read & Not involved Not involved
Transport The parameter modification has no impact on the equipment. Read & Write Transport This parameter cannot be modified. Write Read & Equipment
Not involved
Transport
This parameter cannot be modified. Write Read & Transport The logic port must exist. Read & Write Equipment This parameter cannot be modified. Write Read & Transport If a link is used, you cannot convert the link from E1 to T1, or from T1 to E1. Read & Write Equipment
Not involved Read & Write Transport Not involved This parameter cannot be modified. Write Read & Equipment Not involved This parameter cannot be modified. Write Read & Equipment Not involved This parameter cannot be modified. Write Read & Transport Not involved This parameter cannot be modified. Write Read & Transport Not involved This parameter cannot be modified. Write Read & Transport The services are interrupted until the SCTP link is working normally. The parameter modification should be negotiated with theTransport and after modification, the RNC should be rese Read & Write peer end, Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio
1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnected with the equipment of other vendors.
This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read &
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment
The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Transport
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment
The parameter modification has no impact on the equipment. Read & Write Equipment For parameter modification, Read to ITU-T Q.2110. refer & Write Transport
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Interrupt the service until negotiate successfully again. modified. Write This parameter cannot be Read & Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved For parameter modification, Read to ITU-T Q.2110. refer & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved For parameter modification, Read to ITU-T Q.2110. refer & Write Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Interrupt the service until negotiate successfully again. modified. Write This parameter cannot be Read & Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved GPS record should be deleted before Write this command.Equipment Read & using
Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter is used with the [MML]ADD MBMSALARMSERVICE[/MML] command to enable the no MBM Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Equipment
The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport
Not involved
Radio
Not involved
Not involved
The value of this parameter must fulfill the following condition: [PARA]McchAccessPeriod Coef[/PARA] > [PARA]McchRepPeriodCo ef[/PARA]. Read & Write The value of this parameter must fulfill the following condition: [PARA]McchModPeriodCo ef[/PARA] > [PARA]DRXCycleLenCoef [/PARA] in [MML]ADD CNDOMAIN[/MML]. Read & Write The value of this parameter must fulfill the following condition: [PARA]McchAccessPeriod Coef[/PARA] > [PARA]McchRepPeriodCo ef[/PARA]. Read & Write This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read &
Radio
Radio
This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read &
Transport Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read &
Transport Transport
This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Transport This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Transport
Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved This parameter cannot be modified. Write Read & Transport Not involved In order to modify this parameter, you must use the command [MML]STP IPCHK[/MML] first and [MML]STR IP Read & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write Radio
Not involved This parameter cannot be modified. Write Read & Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved If the RAN Sharing Support Read & Write and MOCN Support are bothRadio switched off,Redundant operators should be removed by Not involved The parameter modification has no impact on the equipment. Read & Write Equipment If the mode is not consistent, The value of this parameter should& Write will interrupt service until it Read be consistent with the peer one. is consistent. Transport Not involved None Read & Write Equipment Not involved This parameter cannot be modified. Write Read & Transport
If the SCTP link is set to SERVER and the application type is NBAP, the working mode cannot be changed to CLIENT. For the SCTP link whose application type is M3UA, the working mode can be modified only when the upper-layer application is deleted. The services are interrupted until the SCTP link is working normally. Read & Write Transport Not involved The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write Transport Not involved The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The IP address of the DHCPRead &must be one of the following addresses configured for the FG2a/GOUa/PEUa/U server Write Transport
Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Transport Modifying this parameter does not& Write existing SAAL link but may affect the SAAL link setup mode. Read affect the Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Equipment The parameter modification has no impact on the equipment. Read & Write Radio 1. When the parameter is set to OFF, the MR function is disabled. 2. The modification of this parameter has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter supports only ASCII code character set.The parameter modification has no impact on the equipmen Read & Write Equipment 1. Set this parameter to ON if you & Writeuse the RNC built-in cell broadcast function. 2. Do not set this paramete Read want to Equipment This parameter cannot be modified. Write Read & Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
Radio
This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved
Equipment
If the mode is not consistent, The modification may affect Read & Write will interrupt service until it is consistent. the interconnection.
Transport
Interrupt the service until negotiate successfully again. Read & Write the parameter is set the same with the local and peer device. The negotiation will be successful only when Transport Not involved In order to modify this parameter, you must use the command [MML]STP IPCHK[/MML] first and [MML]STR IP Read & Write Transport Not involved For parameter modification, Read to ITU-T Q.2110. refer & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Transport
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write
Radio
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio The services are interrupted until the SCTP link is working normally. The parameter modification should be negotiated with theTransport and after modification, the RNC should be rese Read & Write peer end, Not involved If the transport type of the NodeB & IUB-IP, the next hop Transport must be one of the following configured addr Read is Write IP address Not involved If the transport type of the NodeB & IUB-IP, the next hop Transport must be one of the following configured addr Read is Write IP address Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The IP address of the NodeBRead & be the one already configured for other NodeBs. It cannot be the same as the I cannot Write Transport Not involved The IP address of the NodeBRead & be the one already configured for other NodeBs. It cannot be the same as the I cannot Write Transport Not involved When this parameter is modified, theWrite Read & corresponding NodeB must be already configured with an ESN. Equipment Not involved When this parameter is modified, theWrite Read & corresponding NodeB must be already configured with an ESN. Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Less than 10 minutes Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio After this parameter is modified, the Write must be reset to take effect. Read & RNC Transport The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved
Transport
The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport
Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The modification of NMO isRead & Write [PARA]CNDomainId[/PARA] in [MML]ADD CNDOMAIN[/MML valid only when Radio When the value of [PARA]CsNriCfgMode[/PARA] in [MML]SET OPERATORCFGPARA[/MML] is set to ON, Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
This parameter cannot be modified. Write Read & Equipment The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Equipment Before modifying the NodeB to a version of R4 or earlier,Equipment the HSUPA and HSDPA functions of this No Read & Write deactivate This parameter cannot be modified. Write Read & Equipment The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
Radio
Not involved
Radio
The services are interrupted until the signaling point RNCRead & be reset. After modification, the is available. Write should
Transport
Not involved
Transport
The parameter modification has no impact on the equipment. Read & Write Radio When the value of [PARA]CsNriCfgMode[/PARA] in [MML]SET OPERATORCFGPARA[/MML] is set to SUP Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The negotiation will be successful & Write the parameter is set the same with the local and peer device. Read only when Transport The priority of the corresponding service will be interrupt Transport of the port's queue is modified. Read & Write if the DSCP The priority of the corresponding service will be interrupt Transport of the port's queue is modified. Read & Write if the DSCP The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio 1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnected with the equipment of other vendors.
Not involved Read & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The settings of the local end Read & peer end should be consistent. and the Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Equipment Service not interrupted, but CPU will be highcannot be modified. Write This parameter Read & Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Transport This parameter is modified accordingWrite Read & to actual networking. Transport The parameter modification has no impact on the equipment. Read & Write Transport
Not involved
Transport
Not involved This parameter cannot be modified. Write Read & Transport Not involved This parameter cannot be modified. Write Read & Transport Service not interrupted, but CPU will be highcannot be modified. Write This parameter Read & Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
Transport
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved
Equipment
Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved This parameter cannot be modified. Write Read & Transport Not involved The local IP address and the Read IP address must be in the same network segment, and the peer IP address cannot peer & Write Transport Not involved This parameter cannot be modified. Write Read & Transport The services are interrupted until the SCTP of bothworking the SCTP are the parameters that should be negotiated with the peer end before mod The addresses link is ends of normally. Read & Write Transport The services are interrupted until the SCTP of bothworking the SCTP are the parameters that should be negotiated with the peer end before mod The addresses link is ends of normally. Read & Write Transport
This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read &
Transport Equipment
Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved This parameter cannot be modified. Write Read & Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio The services are interrupted until the SCTP link is working parameter that should be negotiated with the peer end before modification. The SCTP port number is the normally. Read & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved This parameter cannot be modified. Write Read & Transport
Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio When the network is in poor Read & Write the detection Transport running status, period cannot be set to a small value. If the value is too s
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Interrupt the service until negotiate successfully again. cause failure in negotiation. Modify this parameter will Read & Write Not involved This parameter cannot be modified. Write Read & Not involved This parameter cannot be modified. Write Read &
Not involved This parameter cannot be modified. Write Read & Radio Not involved This parameter cannot be modified. Write Read & Radio Not involved This parameter cannot be modified. Write Read & Radio Not involved This parameter cannot be modified. Write Read & Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved This parameter cannot be modified. Write Read & Transport The time between deactivate Thisactivate thecannot be modified. Write and parameter port. Read & Transport The time between deactivate Thisactivate thecannot be modified. Write and parameter port. Read & Transport Not involved This parameter cannot be modified. Write Read & Transport Not involved The parameter modification has no impact on the equipment. Read & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Transport
Not involved
Radio
This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport This IP path must be alreadyRead & Write configured. Before modify, the IPPM of the IPPATH should be deactivate and activa Transport
Not involved This parameter cannot be modified. Write Read & Equipment Not involved This parameter cannot be modified. Write Read & Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Transport Not involved This parameter cannot be modified. Write Read & Transport The time between deactivate Thisactivate thecannot be modified. Write and parameter port. Read & Transport Not involved This parameter cannot be modified. Write Read & Transport Not involved This parameter cannot be modified. Write Read & Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio Modifying this parameter does not& Write existing SAAL link but may affect the next setup of the SAAL link. Read affect the Transport The parameter modification has no impact on the equipment. Read & Write Equipment This parameter can be addedRead & Write cannot be removed. or modified but Transport This parameter cannot be modified. Write Read & Transport None Read & Write Equipment None Read & Write Equipment None Read & Write Equipment None Read & Write Equipment None Read & Write Equipment
Not involved Not involved Not involved Not involved Not involved
None Read & Write Equipment This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio The IP address of the DHCPRead &must be one of the following addresses configured for the FG2a/GOUa/PEUa/U server Write Transport This parameter cannot be modified. Write Read & Transport
Not involved
Transport
This parameter cannot be modified. Write Read & Transport This parameter can be addedRead & Write cannot be removed. or modified but Transport This parameter cannot be modified. Write Read & Radio
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read &
Radio Transport
Not involved
Transport
Not involved
Modifying this parameter may affect Write Read & the routing priority when there are multiple routes to the same destination sign Transport
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
All the switches have multiple choices. SELECT ALL means turning on all the switches; CLEAR ALL means turning off all the switches; GRAYED ALL means keeping the original states of all the switches. If the SYS_INFO_UPDATE_FO R_IU_RST switch is turned off, the BARRED_CELL_FOR_CS DOMAIN_RST switch is invalid.The parameter modification has no impact on the equipment. When the parameter RNCAP_IMSI_HO_SWIT CH is set to 1, the SNA_RESTRICTION_SWI TCH check box under the Handover algorithm switch parameter in the MML command SET CORRMALGOSWITCH cannot be selected at the same time. Not involved Read & Write Radio
Not involved
Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Equipment The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Not involved Not involved Not involved Not involved Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport The parameter modification has no impact on the equipment. Read & Write Radio Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Not involved
Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write Radio Not involved Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Not involved Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The settings of PsInfoUpdFlag is valid only when the value of [PARA]PsNriCfgMode[/PARA] in [MML]SET OP Read & Write Equipment The settings of PsInfoUpdTmr is valid only when the value of [PARA]PsInfoUpdFlag[/PARA] in [MML]SET OP Read & Write Equipment Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport
Not involved Not involved Not involved Not involved Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Not involved Not involved Not involved Not involved Not involved Not involved
When [PARA]CNProtclVer[/PAR A] in [MML]ADD CNNODE[/MML] is set to R5 or any later version, PsNriCfgMode may be set to SUPP_IUFLEX.The parameter modification has no impact on the equipment. When [PARA]CNProtclVer[/PAR A] in [MML]ADD CNNODE[/MML] is set to R6 or any later version, PsNriCfgMode may be set to SUPP_MOCN or SUPP_IUFLEX_MOCN.Th e parameter modification has no impact on the equipment. Read & Write Equipment The settings of PSNRILength is valid only when the valueEquipment Read & Write of [PARA]PsNriCfgMode[/PARA] in [MML]SET OPE The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Equipment This parameter cannot be modified. Write Read & Equipment The first byte in the IP address of theWrite FE port cannot be 0 or 127, or the IP address cannot be a broadcast or Read & NodeB Transport The first byte in the IP address of theWrite FE port cannot be 0 or 127, or the IP address cannot be a broadcast or Read & NodeB Transport
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The priority of the corresponding service will be interrupt Transport of the port's queue is modified. Read & Write if the DSCP The priority of the corresponding service will be interrupt Transport of the port's queue is modified. Read & Write if the DSCP The priority of the corresponding service will be interrupt Transport of the port's queue is modified. Read & Write if the DSCP The priority of the corresponding service will be interrupt Transport of the port's queue is modified. Read & Write if the DSCP The priority of the corresponding service will be interrupt Transport of the port's queue is modified. Read & Write if the DSCP When this parameter is set toRead & Write end of the RNC uses the protocol version of CS1 to interconnect with CS1, the local Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio The value of RafcTmr can be negotiated with the value ofEquipment Read & Write [PARA]RatcTmr[/PARA] in [MML]SET IUTIMERAN If the RAN Sharing Support Read & Write and MOCN Support are bothRadio switched off,Redundant operators should be removed by The parameter modification has no impact on the equipment. Read & Write Radio The value of RatcTmr can be negotiated with the value of Equipment Read & Write [PARA]RafcTmr[/PARA] in [MML]SET IUTIMERAN
This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment The retransmit mechanism isRead & the signaling is sent by adopting RLC UM on Uu interface during channel han used if Write Radio The retransmit mechanism isRead & the signaling is sent by adopting RLC UM on Uu interface during channel han used if Write Radio The retransmit mechanism isRead & the signaling is sent by adopting RLC UM on Uu interface during channel han used if Write Radio The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Transport This parameter cannot be modified. Write Read & Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
When you set the clock source for & Write and the PEUa, the link number can be 0 to 31; for the AOUa, the link Read the AEUa Equipment
Not involved Less than 5 minutes Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
When you set the clock source for & Write and the PEUa, the link number can be 0 to 31; for the AOUa, the link Read the AEUa Equipment This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
Transport
The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write Transport
The negotiation will be successful & Write the parameter is set the same with the local and peer device. Read only when Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Equipment This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Less than 5 minutes Less than 5 minutes Less than 5 minutes Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Transport The resource group must exist. & Write Read Transport The resource group must exist. & Write Read Transport The parameter modification has no impact on the equipment. Read & Write Equipment
This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Equipment Modifying this parameter may affect Write Read & the sensitivity of SAAL link detection. Transport
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Radio After modification, the RNCRead & be reset. When a single link is routed to a signaling point, do not enable this sw should Write Transport The parameter modification has no impact on the equipment. Read & Write Equipment This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio Change this parameter will impact& Write Read the function interrelated with Parameter 1. Equipment
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio Change this parameter will impact& Write Read the function interrelated with Parameter 10. Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
Change this parameter will impact& Write Read the function interrelated with Parameter 2. Equipment
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio Change this parameter will impact& Write Read the function interrelated with Parameter 3. Equipment
Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved Change this parameter will impact& Write Read the function interrelated with Parameter 4. Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved Change this parameter will impact& Write Read the function interrelated with Parameter 5. Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved Change this parameter will impact& Write Read the function interrelated with Parameter 6. Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved Change this parameter will impact& Write Read the function interrelated with Parameter 7. Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved Change this parameter will impact& Write Read the function interrelated with Parameter 8. Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved Change this parameter will impact& Write Read the function interrelated with Parameter 9. Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio If the mode is not consistent, The value of this parameter should& Write will interrupt service until it Read be consistent with the peer one. is consistent. Transport
The services are interrupted until the related M3DE is peer end is required. It is recommended that this parameter should not be modified during The negotiation with the available. Write Read & Transport Not involved The modification of RTCPBWRatio is valid only when [PARA]RTCPSwitch[/PARA] in [MML]ADD CNNODE[ Read & Write Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The modification of RTCPSwitch & valid only when [PARA]TnlBearerType[/PARA] in [MML]ADD CNNODE[/ Read is Write Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport This parameter cannot be modified. Write Read & Transport
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport
Not involved
Related traffic record indexes must be already configured.Transport Read & Write
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport
Not involved
Transport
For the Iub adjacent node, the SAALWriteshould stay in the same subsystem as the NodeB. Read & link Transport This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Transport
This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Transport
This parameter cannot be modified. Write Read & Radio [MML]SET MRSCOPECTRL[/MML] is run to specify whether to allow the output of MR log of a cell in this RN Read & Write Radio
This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read &
Transport Radio
Not involved
The scramble switch should be consistent with the interconnected one. Read & Write Transport
Not involved
Transport
1.You can set the DST start date or end date by setting the StartType or EndType parameter to "DATEWEEK" type. In this case, you must set the benchmark day to (n - 6) or earlier, where n represents the last day of the month. For example, in October, you must set the benchmark day to 25 (= 31 - 6) or earlier. If you set the date to "Tuesday in or after Oct.26", it is invalid in year 2005 for the date exceeds the month scope while in year 2006 it is October 31, a valid day. Therefore, you must abide this specification to ensure the setting is valid in each year. 2. When you set a customized daylight saving time, you cannot set the start date or end date of the daylight saving time to February 29 by setting the StartType or EndType parameter to the DATE type. The reason is that the local time cannot be translated to the daylight Interrupt the service until the parameter is correctly set. Read & Write Equipment saving time in a leap year Not involved This parameter cannot be modified. Write Read & Transport Not involved This parameter cannot be modified. Write Read & Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Equipment Not involved The negotiation will be successful & Write the parameter is set the same with the local and peer device. Read only when Transport
Not involved
Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read &
Radio Transport
The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read &
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The source IP address must be one& Write Read of the following addresses: PPP link local IP address of the PEUa/POUa/POS, Transport Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Less than 10 minutes After this parameter is modified, the Write must be reset to take effect. Read & RNC Transport Interrupt the service until the The parameter cannot be modified. Write parameter is correctly set. Read & Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved None Read & Write Equipment Interrupt the service until the The parameter cannot be modified. Write parameter is correctly set. Read & Equipment
Not involved The parameter modification has no impact on the equipment. Read & Write Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Equipment Not involved This parameter cannot be modified. Write Read & Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Transport Not involved This parameter cannot be modified. Write Read & Transport Service not interrupted, but CPU will be highcannot be modified. Write This parameter Read & Equipment Not involved When the loopback type is changed to REMOTE_LOOP or LOCAL_LOOP, the services will be interrupted until t Read & Write Equipment Not involved The standby port does not support & Write IP function. Equipment Read the PING
This parameter cannot be modified. Write Read & Equipment The priority of the corresponding service will be interrupt Equipment of the port's queue is modified. Read & Write if the DSCP If a link is used, you cannot convert the link from E1 to T1, or from T1 to E1. Read & Write Equipment
Not involved
Equipment
Inhibition period of the boardOnly the active board can beRead & Write logically inhibited when you Equipment set the logical slot number of the active board. If an activ
Not involved
This parameter cannot be modified. Write Read & 1. This command is used for the AOUa and the POUa. 2. This command is used only when Huawei equipment is interconnected with the equipment of other vendors.
Equipment
Not involved
Transport
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Equipment The parameter modification has no impact on the equipment. Read & Write Equipment This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Equipment
Not involved
Radio
Not involved
Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The services are interrupted until the signaling point RNCRead & be reset. After modification, the is available. Write should The services are interrupted until the signaling point RNCRead & be reset. After modification, the is available. Write should The services are interrupted until the signaling point RNCRead & be reset. After modification, the is available. Write should
The parameter modification has no impact on the equipment. Read & Write Radio After this parameter is modified, the Write must be reset to take effect. Read & RNC Transport This parameter must be consistent & Write peer equipment. Read with the Transport The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio Before enabling load sharing, you & Writeset the [PARA]RNC_SHARE_SWITCH[/PARA] switch in [MML]SET Read need to Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Not involved Not involved Not involved Not involved Not involved Not involved
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport This parameter cannot be modified. Write Read & Transport One clock source can only with one priority, otherwise it is the same. Read & Write Equipment None Read & Write Equipment
Not involved
Transport
This parameter cannot be modified. Write Read & Transport One clock source can only with one priority, otherwise it is the same. One backplane 8K outClock can only has one Read & Write Equipment This parameter cannot be modified. Write Read & Transport For parameter modification, Read to ITU-T Q.2110. refer & Write Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment
The parameter modification has no impact on the equipment. Read & Write Equipment This parameter cannot be modified. Write Read & Equipment
Not involved Less than 5 minutes Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Equipment None Read & Write Equipment None Read & Write Equipment This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Equipment The parameter modification has no impact on the equipment. Read & Write Equipment This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Less than 5 minutes Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Radio If the interface board clock source & Write subrack is set, you can set the 8 kHz output clock source. If the inter Read of the RSS Equipment The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Equipment This parameter cannot be modified. Write Read & Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
Equipment
This parameter cannot be modified. Write Read & Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved This parameter cannot be modified. Write Read & Interrupt the service until the The parameter cannot be modified. Write parameter is correctly set. Read &
Equipment Equipment
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Less than 10 minutes Not involved Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment For parameter modification, Read to ITU-T Q.2110. refer & Write Transport After this parameter is modified, the Write must be reset to take effect. Read & RNC Transport This parameter cannot be modified. Write Read & Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write
Radio
Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Equipment This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio None Read & Write Equipment
Not involved Read & Write Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved This parameter cannot be modified. Write Read & Equipment Interrupt the service until the The parameter cannot be modified. Write parameter is correctly set. Read & Equipment Not involved This parameter cannot be modified. Write Read & Equipment Not involved This parameter cannot be modified. Write Read & Equipment Not involved The modification of Switch3GPP25415CR0125 is valid only when [PARA]CNDomainId[/PARA] in [MML]ADD Read & Write Radio Not involved This parameter is based on actual networking. Read & Write Transport Not involved This parameter is based on actual networking. Read & Write Transport Not involved Change this parameter will impact& Write function controlled by switch 1. Read the patch Transport Not involved Change this parameter will impact& Write function controlled by switch 10. Read the patch Transport Not involved Change this parameter will impact& Write function controlled by switch 2. Read the patch Transport Not involved Change this parameter will impact& Write function controlled by switch 3. Read the patch Transport Not involved Change this parameter will impact& Write function controlled by switch 4. Read the patch Transport Not involved Change this parameter will impact& Write function controlled by switch 5. Read the patch Transport Not involved Change this parameter will impact& Write function controlled by switch 6. Read the patch Transport Not involved Change this parameter will impact& Write function controlled by switch 7. Read the patch Transport Not involved Change this parameter will impact& Write function controlled by switch 8. Read the patch Transport Not involved Change this parameter will impact& Write function controlled by switch 9. Read the patch Transport Interrupt the service until the The parameter cannot be modified. Write parameter is correctly set. Read & Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved None Read & Write Equipment
When [PARA]CNProtclVer[/PAR A] in [MML]ADD CNNODE[/MML] is set to R99, SupportCRType is CR527_SUPPORT or CR527_NOT_SUPPORT; when [PARA]CNProtclVer[/PAR A] in [MML]ADD CNNODE[/MML] is set to R4, SupportCRType is CR528_SUPPORT or CR528_NOT_SUPPORT; when [PARA]CNProtclVer[/PAR A] in [MML]ADD CNNODE[/MML] is set to R5, SupportCRType is CR529_SUPPORT or CR529_NOT_SUPPORT; when [PARA]CNProtclVer[/PAR A] in [MML]ADD CNNODE[/MML] is set to R6, there is no SupportCRType. The parameter modification has no impact on the equipment.
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
None Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio None Read & Write Equipment None Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Radio None Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Radio T302 broadcast in the SIB1 = Roundup {[timer 302 [ms]] Radio [Iub transmission delay]}. [timer 302 [ms]] is conf Read & Write +2x The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The time value of T314 and T315 & Write both equal to Radio Read should be 0 or both greater than T302*N302.The parameter modifi
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The time value of T314 and T315 & Write both equal to Radio Read should be 0 or both greater than T302*N302.The parameter modifi The parameter modification has no impact on the equipment. Read & Write Radio The modification of T3212 is valid only when [PARA]CNDomainId[/PARA] in [MML]ADD CNDOMAIN[/MM Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
Radio
This parameter cannot be modified. Write Read & This parameter cannot be modified. Write Read &
Radio Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Transport
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio None Read & Write Equipment None Read & Write Equipment None Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Less than 5 minutes Not involved
This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport This TRMMAP must be already configured. Read & Write Transport This TRMMAP must be already configured. Read & Write Transport This TRMMAP must be already configured. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport
The services are interrupted until themodifying this parameter, deactivate all the cells under this NodeB. Before cell is activated again. Read & Write Radio Not involved Set TnlBearerType according to the actual used transport type.The parameter modification has no impact on the eq Read & Write Transport Not involved Set TnlBearerType according to the actual used transport type.The parameter modification has no impact on the eq Read & Write Transport Interrupt the service until the The parameter cannot be modified. Write parameter is correctly set. Read & Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
Transport
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport
Not involved
Transport
This parameter cannot be modified. Write Read & Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Less than 5 minutes Not involved
This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio When this parameter is modified, theWrite Read & corresponding NodeB must be already configured with an ESN. Transport When this parameter is modified, theWrite Read & corresponding NodeB must be already configured with an ESN. Transport When this parameter is modified, theWrite Read & corresponding NodeB must be already configured with an ESN. Transport This parameter cannot be modified. Write Read & Transport The loopback test may interrupt the services carried on this link. Read & Write Transport When the BT is AEUa and the LNKT is E1_DOUBLE_FRAME or E1_CRC4_MULTI_FRAME,you could set 16 Read & Write Transport
This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved Not involved Not involved Not involved Less than 10 minutes Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Equipment The parameter modification has no impact on the equipment. Read & Write Transport This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Transport The parameter modification has no impact on the equipment. Read & Write Transport
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Transport Not involved This parameter cannot be modified. Write Read & Transport
Not involved This parameter cannot be modified. Write Read & If the mode is not set back, will interrupt service until itmodified. Write This parameter cannot be isRead & set back.
Transport Transport
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write
Radio
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write
Radio
The services are interrupted until the cell is activated again. in advance. The cell should be deactivated Read & Write Radio Not involved The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Transport Not involved This parameter cannot be modified. Write Read & Transport Not involved This parameter cannot be modified. Write Read & Equipment Not involved The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Equipment This parameter cannot be modified. Write Read & Transport The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Transport This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Radio This parameter cannot be modified. Write Read & Radio
The parameter modification has no impact on the equipment. Read & Write Radio This parameter cannot be modified. Write Read & Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio When this parameter is modified, theWrite Read & corresponding NodeB must be already configured with an ESN. Transport The parameter modification has no impact on the equipment. Read & Write Radio When this parameter is modified, theWrite Read & corresponding NodeB must be already configured with an ESN. Transport When this parameter is modified, theWrite Read & corresponding NodeB must be already configured with an ESN. Transport
The parameter modification has no impact on the equipment. Read & Write Radio When this parameter is modified, theWrite Read & corresponding NodeB must be already configured with an ESN. Transport
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Equipment The parameter modification has no impact on the equipment. Read & Write Equipment
Not involved Not involved Not involved Less than 5 minutes Not involved
The parameter modification has no impact on the equipment. Read & Write Radio When this parameter is modified, theWrite Read & corresponding NodeB must be already configured with an ESN. Transport This parameter cannot be modified. Write Read & Transport The configuration data must Read & Writewith that of the Transport be consistent peer end. This parameter cannot be modified. Write Read & Transport
The services are interrupted until the SCTP link is working normally. This parameter is based on actual networking. Read & Write
Transport
Not involved
If the setting is incorrect, theRead & Write address may be unavailable. destination IP Transport
Modify the relationship between VLAN and DSCP may interfere the network. Read & Write Transport Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type).
Modifying this parameter may affect Write Read & the adjacent node configured with TRMMAP. After the modification succeed Transport Modifiying this parameter will affectWrite of admittingTransport Read & the rule new traffic(the sequence of choosing path type). Modifiying this parameter will affectWrite Read & the adjacent node configured with this factor table. After the modification suc Transport
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved Less than 5 minutes
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio None Read & Write Equipment None Read & Write Equipment None Read & Write Equipment None Read & Write Equipment None Read & Write Equipment None Read & Write Equipment This parameter cannot be modified. Write Read & Transport The configuration data must Read & Writewith that of the Transport be consistent peer end.
Not involved Not involved Not involved Not involved Not involved Not involved Not involved Not involved
The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio The parameter modification has no impact on the equipment. Read & Write Radio None Read & Write Equipment
Not involved
The parameter modification has no impact on the equipment. Read & Write Radio
The parameter modification has no impact on the equipment. Read & Write Radio For parameter modification, Read to ITU-T Q.2110. refer & Write Transport
Not involved This parameter cannot be modified. Write Read & Transport Not involved The parameter modification has no impact on the equipment. Read & Write Equipment Not involved To convert a link from E1 to Read & Write to E1 on the AOUa/POUa, you should reset the board. T1 or from T1 Transport Not involved This parameter cannot be modified. Write Read & Transport Not involved The parameter modification has no impact on the equipment. Read & Write Radio Not involved The parameter modification has no impact on the equipment. Read & Write Radio Interrupt the service until the The parameter cannot be modified. Write parameter is correctly set. Read & Equipment
Introduced in Version RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 RAN11.0
RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0
RAN11.0
RAN11.0 RAN11.0
RAN11.0
RAN11.0 RAN11.0
RAN11.0
RAN11.0 RAN11.0
Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 RAN11.0
RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 RAN11.0
RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0
RAN11.0
RAN11.0
RAN11.0
Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0
RAN11.0
Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0
RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 RAN11.0
RAN11.0
RAN11.0 RAN11.0
RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0
Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0
RAN11.0 RAN11.0
RAN11.0
RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 RAN11.0
RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0
RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0
RAN11.0
Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0
RAN11.0 RAN11.0
RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0
RAN11.0
Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 RAN11.0
RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 RAN11.0
RAN11.0
RAN11.0
RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0
RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0
RAN11.0 RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0
RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0
RAN11.0
RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 RAN11.0
RAN11.0 RAN11.0
RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0
RAN11.0 RAN11.0
RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0 RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0 RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0 RAN11.0
RAN11.0
RAN11.0
RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0 RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0
RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
RAN11.0 RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0
RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 RAN11.0 Versions earlier than RAN11.0 RAN11.0
RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0