Professional Documents
Culture Documents
Revision AA
Spec No.: Author: Steven T Berry File name: AO-90380AA.doc Division: BURNY Rev: AA Date: 18 August 2006
This document is the property of Cleveland Motion Controls, Inc. and is furnished as confidential information only. It must not be copied, traced or reproduced in any manner nor submitted to any outside parties for any purpose without our written permission. Any use of this document without written permission of Cleveland Motion Controls, Inc. is a violation of our exclusive rights.
Rev: AA
REVISION HISTORY
Rev AA ECO STB Author STB Date 18 Aug 06 Description of Change As Released
Page 2 of 7
Rev: AA
TABLE OF CONTENTS
1. 2. INTRODUCTION.........................................................................................................................................................4 BIOS SETUP FOR THE 886LCD-M/FLEX ..............................................................................................................4 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 MAIN SYSTEM OVERVIEW .......................................................................................................................................4 ADVANCED SETTINGS ..............................................................................................................................................4 PCI PNP...................................................................................................................................................................5 BOOT .......................................................................................................................................................................6 SECURITY.................................................................................................................................................................6 CHIPSET ...................................................................................................................................................................6 POWER .....................................................................................................................................................................7 EXIT .........................................................................................................................................................................7
Page 3 of 7
Rev: AA
1.
Introduction
This document contains all of the parameters that need to be set in the BIOS for the Kontron 886LCD-M/FLEX motherboard used in the B10 LCD Plus. Each section of the document represents a different section in the BIOS. Be sure that all settings in the Burny 10 LCD Plus match the setting specified in this document. All BIOS settings marked with Automatically detected cannot be changed. These settings are set by the system.
2.
Page 4 of 7
BIOS Settings, Kontron 886LCD-M/Flex P/N: AO-90380 LAN Config: ETH1 Config ETH2 (Upper) ETH3 (Lower) Floppy Config: Floppy A Floppy B Super I/O Config: Onboard floppy controller Serial Port 1 Address Serial Port 2 Address Serial Port 2 Mode Parallel Port Address ICH SIO Serial Port1 Address ICH SIO Serial Port2 Address Hardware Health Config: H/W Health Function H/W Health Monitoring Fan Cruise Control Watchdog Function ACPI Config: ACPI Aware O/S General ACPI Configuration Suspend mode Repost Video on S3 Resume S4BIOS Support Advanced ACPI Configuration ACPI 2.0 Features ACPI APIC support APIC ACPI SCI IRQ AMI OEMB table Headless Mode Remote Access Configuration Remote Access USB Config: USB Function Legacy USB Support USB 2.0 Controller USB 2.0 Controller Mode
Rev: AA
Enabled Disabled Disabled 1.44 MB 3 Disabled Enabled 3F8/IRQ4 2F8/IRQ3 Normal Disabled 3E8/IRQ10 2E8/IRQ11 All Disabled Disabled YES S1 & S3 STR Yes Disabled No Enabled Disabled Enabled Disabled Disabled All USB Ports Enabled Enabled Full Speed
Page 5 of 7
Rev: AA
2.4 Boot
BIOS Entry Boot Settings Configuration Quick Boot Quite Boot Boot up Num-Lock PS/2 Mouse Support Halt on Hit DEL Message Display Interrupt 19 Capture Boot Device Priority 1st Boot device 2nd Boot Device Auto Adjust Boot Priority Removable Devices 1st Force boot Device Hide Removable Devices Execute Embedded Firmware Setting Enabled Disabled On Auto All, But Keyboard Enabled Disabled 1st floppy drive Current Hard drive Yes Yes Disabled No Disabled
2.5 Security
BIOS Entry Supervisor Password User Password Change Supervisor Password Change User Password Clear User Password Boot Sector Virus Protection Primary Master HDD User Password Setting Not Installed Not Installed Do Nothing Do Nothing Do Nothing Disabled Do Nothing
2.6 Chipset
BIOS Entry Intel Montara-GML NorthBridge Configuration Primary Video device Graphics Mode Select Southbridge Configuration OnBoard AC 97 Audio IOAPIC OnBoard Amplifier Extended IOAPIC Boot Type Backlight Signal Inversion LCDVCC Voltage EDID Support LVDS Setting Auto Enabled, 32MB Enabled Enabled Enabled Enabled CRT + LFP Enabled 3.3V Enabled 1024 X 768 => Special => LVDS-XGA-CRT-DA
Page 6 of 7
Rev: AA
2.7 Power
BIOS Entry Power Management / APM Restore on AC Power Loss Keyboard/ Mouse Power On S3-S5 Keyboard Hotkey Setting Disabled On Disabled Any Key
2.8 Exit
BIOS Entry Save Changes and Exit Secure CMOS Halt on Invalid Time/Date Setting Enter key for this choice once done setting BIOS Enabled This will remember the BIOS setting if battery loss Enable
Page 7 of 7