You are on page 1of 8

CD4093BC Quad 2-Input NAND Schmitt Trigger

October 1987 Revised January 1999

CD4093BC Quad 2-Input NAND Schmitt Trigger


General Description
The CD4093B consists of four Schmitt-trigger circuits. Each circuit functions as a 2-input NAND gate with Schmitttrigger action on both inputs. The gate switches at different points for positive and negative-going signals. The difference between the positive (VT+) and the negative voltage (VT) is defined as hysteresis voltage (VH). All outputs have equal source and sink currents and conform to standard B-series output drive (see Static Electrical Characteristics). Guaranteed s Equal source and sink currents s No limit on input rise and fall time s Standard B-series output drive s Hysteresis voltage (any input) TA = 25C Typical VDD = 5.0V VDD = 10V VDD = 15V VH = 1.5V VH = 2.2V VH = 2.7V VH = 0.1 VDD

Features
s Wide supply voltage range: s Schmitt-trigger on each input with no external components s Noise immunity greater than 50% 3.0V to 15V

Applications
Wave and pulse shapers High-noise-environment systems Monostable multivibrators Astable multivibrators NAND logic

Ordering Code:
Order Number CD4093BCM CD4093BCN Package Number M14A N14A Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow Body 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide

Devices also available in Tape and Reel. Specify by appending the suffix letter X to the ordering code.

Connection Diagram
Pin Assignments for SOIC and DIP

Top View

1999 Fairchild Semiconductor Corporation

DS005982.prf

www.fairchildsemi.com

CD4093BC

Absolute Maximum Ratings(Note 1)


(Note 2) DC Supply Voltage (VDD) Input Voltage (VIN) Storage Temperature Range (TS) Power Dissipation (PD) Dual-In-Line Small Outline Lead Temperature (TL) (Soldering, 10 seconds) 260C (Note 2) 700 mW 500 mW 0.5 to +18 VDC 0.5 to VDD +0.5 VDC 65C to +150C

Recommended Operating Conditions (Note 2)


DC Supply Voltage (VDD) Input Voltage (VIN) Operating Temperature Range (TA) 3 to 15 VDC 0 to VDD VDC 40C to +85C

Note 1: Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed; they are not meant to imply that the devices should be operated at these limits. The table of Recommended Operating Conditions and Electrical Characteristics provides conditions for actual device operation. Note 2: VSS = 0V unless otherwise specified.

DC Electrical Characteristics
Symbol IDD Parameter Quiescent Device Current VOL LOW Level Output Voltage VDD = 5V VDD = 10V VDD = 15V

Conditions

40C Min Max 1.0 2.0 4.0 0.05 0.05 0.05 4.95 9.95 14.95 1.3 2.85 4.35 2.75 5.5 8.25 0.5 1.0 1.5 0.52 1.3 3.6 0.52 1.3 3.6 0.3 0.3 2.25 4.5 6.75 3.6 7.15 10.65 2.35 4.3 6.3 4.95 9.95 14.95 1.5 3.0 4.5 2.75 5.5 8.25 0.5 1.0 1.5 0.44 1.1 3.0 0.44 1.1 3.0 Min

+25C Typ Max 1.0 2.0 4.0 0 0 0 5 10 15 1.8 4.1 6.3 3.3 6.2 9.0 1.5 2.2 2.7 0.88 2.25 8.8 0.88 2.25 8.8 105 105 0.3 0.3 2.25 4.5 6.75 3.5 7.0 10.5 2.0 4.0 6.0 0.05 0.05 0.05

+85C Min Max 7.5 15.0 30.0 0.05 0.05 0.05 4.95 9.95 14.95 1.5 3.0 4.5 2.65 5.35 8.1 0.35 0.70 1.20 0.36 0.9 2.4 0.36 0.9 2.4 1.0 1.0 2.3 4.65 6.9 3.5 7.0 10.5 2.0 4.0 6.0

Units A A A V V V V V V V V V V V V V V V mA mA mA mA mA mA A A

VIN = VDD, |IO| < 1 A VDD = 5V VDD = 10V VDD = 15V

VOH

HIGH Level Output Voltage

VIN = VSS, |IO| < 1 A VDD = 5V VDD = 10V VDD = 15V

VT

Negative-Going Threshold Voltage (Any Input)

|IO| < 1 A VDD = 5V, VO = 4.5V VDD = 10V, VO = 9V VDD = 15V, VO = 13.5V

VT+

Positive-Going Threshold Voltage (Any Input)

|IO| < 1 A VDD = 5V, VO = 0.5V VDD = 10V, VO = 1V VDD = 15V, VO = 1.5V

VH

Hysteresis (VT+ VT) (Any Input)

VDD = 5V VDD = 10V VDD = 15V VIN = VDD VDD = 5V, VO = 0.4V VDD = 10V, VO = 0.5V VDD = 15V, VO = 1.5V

IOL

LOW Level Output Current (Note 3)

IOH

HIGH Level Output Current (Note 3)

VIN = VSS VDD = 5V, VO = 4.6V VDD = 10V, VO = 9.5V VDD = 15V, VO = 13.5V

IIN

Input Current

VDD = 15V, VIN = 0V VDD = 15V, VIN = 15V

Note 3: IOH and IOL are tested one output at a time.

www.fairchildsemi.com

CD4093BC

AC Electrical Characteristics
Symbol tPHL, tPLH Parameter Propagation Delay Time

(Note 4)
Conditions Min Typ 300 120 80 90 50 40 (Any Input) (Per Gate) 5.0 24 Max 450 210 160 145 75 60 7.5 Units ns ns ns ns ns ns pF pF

TA = 25C, CL = 50 pF, RL = 200k, Input tr, tf = 20 ns, unless otherwise specified VDD = 5V VDD = 10V VDD = 15V tTHL, tTLH Transition Time VDD = 5V VDD = 10V VDD = 15V CIN CPD Input Capacitance Power Dissipation Capacitance

Note 4: AC Parameters are guaranteed by DC correlated testing.

www.fairchildsemi.com

CD4093BC

Typical Applications Gated Oscillator

Assume t1 + t2 >> tPHL + tPLH then: t0 = RC ln [VDD/VT] t1 = RC ln [(VDD VT)/(VDD VT+)] t2 = RC ln [VT+/VT]

Gated One-Shot
(a) Negative-Edge Triggered

(b) Positive-Edge Triggered

www.fairchildsemi.com

CD4093BC

Typical Performance Characteristics


Typical Transfer Characteristics Guaranteed Trigger Threshold Voltage vs VDD

Guaranteed Hysteresis vs VDD

Guaranteed Hysteresis vs VDD

Input and Output Characteristics

VNML = VIH(MIN) VOL VIH(MIN) = V T+(MIN) VNMH = VOH VIL(MAX) VDD VIL(MAX) = VDD VT(MAX)

www.fairchildsemi.com

CD4093BC

AC Test Circuits and Switching Time Waveforms

www.fairchildsemi.com

CD4093BC

Physical Dimensions inches (millimeters) unless otherwise noted

14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow Body Package Number M14A

www.fairchildsemi.com

CD4093BC Quad 2-Input NAND Schmitt Trigger

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N14A

LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the sonably expected to cause the failure of the life support body, or (b) support or sustain life, and (c) whose failure device or system, or to affect its safety or effectiveness. to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the www.fairchildsemi.com user.

Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.

You might also like