Professional Documents
Culture Documents
A: Open your web browser and type the IP address of the TEW-452BRP in the address bar. The
default IP address is 192.168.1.1. At the login, enter your username (admin) and password (admin).
A:
A:
Step 1.
Open your web browser and type the IP address of the TEW-452BRP in the address bar. The default IP address is 192.168.1.1. At the login, enter your username (admin) and password (admin). Click on LAN Setting on the left hand side and then click on LAN&DHCP server at the top of the page.
Step 2.
Step 3.
A:
TEW-452BRP F.A.Q.
Q: How do I change the password and username on my TEW-452BRP?
A: Step 1.
Open your web browser and type the IP address of the TEW-452BRP in the address bar. The default IP address is 192.168.1.1. At the login, enter your username (admin) and password (admin). Click on LAN Setting on the left hand side and then click on Password at the top of the page.
Step 2.
Step 3.
Enter the new Administrator ID and/or password. Click Apply and then back to save the settings.
TEW-452BRP F.A.Q.
Q: How do I save or reload the configuration of my TEW-452BRP?
A:
Step 1.
Open your web browser and type the IP address of the TEW-452BPR in the address bar. The default IP address is 192.168.1.1. At the login, enter your username (admin) and password (admin). Click on the Tools on the left hand side and then click on Settings at the top of the page.
Step 2.
Step 3.
To save a configuration file click on the Backup button. It will prompt you to save the file. The default name of the file is config.bin. Click on Browse under the Load Settings field to load a previously saved configuration file. Locate and select the previously saved config.bin file and click on Load.
TEW-452BRP F.A.Q.
Step 2. Click on the Tools on the left hand side and then click on Firmware at the top of the page.
Step 3. Step 4.
Click on Browse next to the box under the Upgrade Firmware section. Locate and select the firmware file that you previously downloaded and extracted. Click on Upgrade. It will take approximately 30 seconds to upgrade the firmware and the access point to restart.
Do NOT interrupt the firmware update process. Doing so may damage the product.
A: Step 1.
Open your web browser and type the IP address of the TEW-452BRP in the address bar. The default IP address is 192.168.1.1. At the login, enter your username (admin) and password (admin).
TEW-452BRP F.A.Q.
Step 2. Click on Wireless on the left hand side and then click on Authentication at the top of the page.
Step 3. Step 4.
Choose your Authentication type and enter your key settings. Click Apply to save your settings.
Open your web browser and type the IP address of the TEW-452APB in the address bar. The default IP address is 192.168.1.1. At the login, enter your username (admin) and password (admin).
TEW-452BRP F.A.Q.
Step 2. Click on the Status on the left hand side and then click on Device Information at the top of the page. The MAC address for the unit is located under the LAN section.
A:
Step 1.
Open your web browser and type the IP address of the TEW-452BRP in the address bar. The default IP address is 192.168.1.1. At the login, enter your username (admin) and password (admin). Click on Wireless on the left hand side and then click on Basic at the top of the page.
Step 2.
TEW-452BRP F.A.Q.
Step 3. Step 4. Choose a different channel from the drop down box next to the Channel field. Click Apply to save your settings.
A: Step 1.
Open your web browser and type the IP address of the TEW-452BRP in the address bar. The default IP address is 192.168.1.1. At the login, enter your username (admin) and password (admin). Click on Wireless on the left hand side and then click on Basic at the top of the page.
Step 2.
Step 3. Step 4.
Enter in your desired SSID in the SSID field. Click Apply to save your settings.
Q: Why doesnt it save or make changes when I click Apply for WEP or changing the Time?
A: Make sure that you are using Internet Explorer and not an unsupported browser like Fire Fox.