You are on page 1of 2

CUTSAW SERIES 720pc

Straight and revolving Cross Cut Saw

The length bench ”LX” with inbuilt short


lumber/timber stop. Stopper accuracy ±1
mm. The bench is designed to be completed
with forks and pushers for automatic stacking of
finished sawed lumber/timber on a lift table.

0 REVOLVE from 0° to 360°


0 INCLINATION from 90° down to 28°
0 CUT HEIGHTS up to 260 mm
0 ADJUSTABLE in depth
0 COMPUTER guided, resulting in fast adjustments

HUMAN MACHINE INTERFACE eliminated since the operator has a full overwiew of
each step in the sawing process.
RANDEK’s 720pc series is equipped with graphic touch
screen. The program controlling the saw is using HMI For more advanced manufacturers the saw can
(Human Machine Interface) which is an excellent tool for interface with most common CAD/CAM programs on
the operator. The operator can directly, on the screen, see the market. The saw has a inbuilt network card and is
how the finished detail will look, and can easily change ready to be connected over a network through the
any measure by click on the screen. The graphical picture TCP/IP protocol. With this CAD inter face the operator
will update immediately and show how the detail looks downloads a project from the network directly into the
like after the changes. The sawprogram will process all saw, and the saw automatically follow every step in the
necessary parameters suc h as revolving, inclination and downloaded file. All the operator has to do is feeding in
center line and so on regardless what value the operator new lumber/timber and start the saw sequence and
changes. The risk for miscalculations or other common the saw will then do all the settings and positioning
mistakes at manual programming are almost automatically.
CUTSAW SERIES 720pc
Straight and revolving Cross Cut Saw

EXTRA OPTIONS
We can offer several different options to our saws. From
roller conveyors, milling machines, drilling units and splicing
presses to more advanced equipment like automatic infeed
of lumber/timber and fully automatic stackers of finished
sawed lumber/timber.
Splicing press Timber feeder

FEEDING DEVICE
Complete with Ø150mm with motor. Pneumatically raised with a button on the saw. When the operator
activates the device the roller will turn and at the same time the roller lifts up. The device stops working
when the operator releases the button.
RETRACTING DEVICE
Available in different sizes depending on which type of bench and back fence is used. When the operator
presses the saw button the device come up and then move the timber towards the back fence.

PLUNGER
Adjustable pneumatic plunger to lock the timber during the sawing. Included with saws but can be used
with other equipment like drilling units, splicing press and milling machines.

Description / Sawtype Sort SPL722pc SPL725pc SPL728pc


Computer guided revolving Degrees 180° 180° 360°
Revolving accuracy Degrees ±0,1° ±0,1° ±0,1°
Manual guided revolving Degrees — — —
Computer guided revolving Degrees — — 90-28°
Inclination accuracy Degrees — — ±0,5°
Manual pneumatic inclination Degrees — 90-40° —
Computer guided center line adjustment mm 250 250 250
Center line accuracy mm ±0,5 ±0,5 ±0,5
Diameter af the saw blade mm 700 700 700
Air consumption NL / min ˜500 ˜500 ˜500
Air speed output m / sec 30 30 30
Saw motor kW 5,5 7,5 7,5
Article number ra ra00003 ra00002 ra00001

Examples on possible cuts for respective saw model


SP722pc SP722pc
SPL725pc SPL725pc SPL725pc SPL725pc
SPL728pc SPL728pc SPL728pc SPL728pc SPL728pc

Reseller:

Randek AB
Tångvägen 20 • SE-311 32 Falkenberg • Sweden
Phone: +46 380 566500 • Fax: +46 346 80660
www.randek.se • E-mail: info@randek.se

You might also like