Professional Documents
Culture Documents
2/4/2013
Scientific Spine
Spinal Anatomy
Spinal Diseases
Spine Scores
Spine Imaging
Spine Surgery
Spinal Materials
Spine Articles
Spine News
Who is Who
Spine Physicians
Patient Resources
You are here: Scientific Spine > Spinal Anatomy > Thoracic Spine Anatomy
Search
BONY ANATOMY
The thoracic vertebrae are intermediate in size between the cervical and lumbar vertebrae. There are regional variations from Tl to T12. Tl shows some similarities to the cervical vertebrae with uncinate processes protruding from its superolateral edges. T2 to T8 are quite uniform, and are considered as typical thoracic vertebrae. T9 to T12 are the transition vertebrae, and shows some similarities with lumbar vertebrae. Thoracic region can also be subdivided as upper (T1-T4), middle (T5-T8), and lower (T9-T12) thoracic areas. Vertebral bodies: Thoracic vertebral bodies are heart-shaped, with a deeper anterior posterior dimension than medio-lateral width. The left side of the vertebral body may be slightly flattened or depressed due to pulsations of the aorta. The dimensions of the bodies increase as one moves down the spinal column (see picture).
Pedicles: The pedicles connect the vertebral bodies to the posterior elements. They are cylinderlike structures and their medial cortex is thicker than the lateral cortex. They are oval in cross section, having larger heights and smaller widths. However, their elliptical shapes are highly variable. The medial wall of the pedicle is bounded by the exiting nerve roots and the thecal sac. Laterally the pedicle is bounded by the costovertebral ligaments, joints, and ribs. Superiorly and inferiorly, the pedicles are bounded by the adjacent neural foramen. Pedicle sizes are around 6 to 8 mm from T1 to T12. The smallest sizes of pedicles are found between T3 and T6 and may only be 10 mm in height and 4 mm in width. The largest pedicle diameter is usually in the low thoracic region, being 14 mm in height and 8 mm in height at T12 level. In the proximal thoracic spine, pedicle sizes are slightly larger than those of middle thoracic levels. Pedicle axes show convergence at the axial (transverse) plane. These transverse angles are also show regional differences. The largest transverse angulations are observed at T1 (30 degrees). A steady reduction in transverse angulations is observed as one moves caudally, with the transverse inclination of the T12 pedicles being approximately 0 degrees. The pedicles are also show downward inclination at the sagittal plane. This inclination is at the posterior superior to anterior inferior direction, and is around 20 degrees.Determining the posterior projection of the pedicle on the posterior elements is of crucial importance during pedicle screw placement. The center of the pedicle projection lies at the intersection of a line drawn parallel to the edge of the transverse process in its superior one-third, and a line drawn 1 to 2 mm medial to the lateral edge of the lamina. Facet Joints: The thoracic facets oriented in the coronal plane. Thus, thoracic facets allow primarily lateral bending and axial rotation. The superior articular facet of the caudal vertebrae forms the roof of the neural foramen. Transverse Processes: The transverse processes join the pedicles and the laminae at their bases. They extend lateral and posterior, to make room for the ribs to pass anterior to them. They articulate with the ribs on their anterolateral surface. T1 transverse processes is the largest and then gradually decrease in size toward T12. The angulation in the transverse plane changes from fairly flat at T1 to more posteriorly protruding at T12. Lamina and Spinous Processes: The thoracic vertebrae typically have long, slender spinous processes that point downward and overlap vertebral arches of the vertebra below. Thus, thoracic laminectomy requires removal of the inferior portion of the rostral spinous process. Both the laminae and the spinous processes slope in a superior anterior to posterior inferior direction. They serve as attachment points for the segmental spinal muscles and the thoracolumbar fascia.
RIB CAGE
Each thoracic segment is accompanied by a pair of ribs. The ribs articulate with the spinal column posteriorly, and the sternum anteriorly. Ribs 1 to 7 are termed as true ribs. They articulate with the sternum directly. Ribs 8-10 are termed as false ribs, and they articulate with the costocartilage of the rib
http://www.scientificspine.com/spinal-anatomy/thoracic-spine-anatomy.html 1/5
2/4/2013
above. Ribs 11 and 12 are termed as floating ribs, because they do not articulate to either the sternum or the costal cartilage at their distal ends (see picture).
Costovertebral Joints (Costal facets): The first, eleventh, and twelfth pair of ribs articulate with their named vertebra only. The second through tenth ribs articulate both with their named vertebral body and with the intervertebral disk and the vertebra above. Also, each pair of ribs articulates with the anterior surface of the transverse process of its named vertebrae. The ribs are connected to the vertebral column by the costovertebral ligaments. The space between the transverse process, the lateral edge of the pedicle, and the medial edge of the rib constitutes a triangular osteoligamentous zone. This zone can be used for extrapedicular screw placement (see picture).
LIGAMENTS
The functions of the ligaments are to allow and limit physiologic motion, to contribute to the spinal stability, and to protect the spinal cord in trauma. There are seven spinal ligaments (see picture).
Anterior Longitudinal Ligament: The anterior longitudinal ligament (ALL) runs down the ventral surface of the spine from the occiput to the sacrum. The ALL is thicker and narrower in the thoracic region. The ligament is thick and slightly more narrow over the vertebral bodies and firmly
http://www.scientificspine.com/spinal-anatomy/thoracic-spine-anatomy.html 2/5
2/4/2013
attached to the edges of the vertebral bodies. On contrary, the ALL thinner but slightly wider over the intervertebral discs and it is loosely attached to the disk annulus. The ligament has three layers: superficial, intermediate and deep. The superficial layer traverses three or four vertebrae, the intermediate layer covers two or three and the deep layer is only between individual vertebrae. The deep layers of the ligament, as it crosses the vertebral body, blend with the periosteum. Posterior Longitudinal Ligament: The posterior longitudinal ligament (PLL) is situated within the vertebral canal. It arises from the posterior aspect of the basiocciput, is continuous with the membrana tectoria, and runs over the posterior surfaces of the bodies of the vertebrae, down to the coccyx. It is wider over the intervertebral disk than over the vertebral body. This is important in understanding the typical location for a disc herniation. The PLL is composed of smooth, shining, longitudinal fibers, denser and more compact than those of the ALL, and consists of superficial layers occupying the interval between three or four vertebae, and deeper layers which extend between adjacent vertebrae. Intertransverse Ligaments: The intertransverse ligaments are situated between the transverse processes. In the thoracic region, they are rounded cords, and closely connected with the deep muscles of the back. Capsular Ligaments: In general, a capsular ligament is a part of the articular capsule that surrounds a synovial joint. In the spine, the capsular ligaments are attached to the articular margins of the articular processes. The fibers are oriented perpendicular to the facet joint and are stronger in the thoracic and lumbar region than in the cervical region. Ligamentum Flavum: The ligamentum flavum connects the anteroinferior edge of the lamina to the posterosuperior edge of the lamina below. They are best seen from the interior of the vertebral canal. It extends from C2 to S1. The ligament consists of two lateral portions which start out on either side of the roots of the articular processes, and extend backward to the midline; the posterior margins of the two portions are in contact and to a certain extent united, there are small gaps for the passage of small vessels. The ligamentum flavum is thicker in the thoracic region. This ligament is composed mainly of elastic fibers, and that elasticity serves to preserve the upright posture, and to assist the vertebral column to resume after flexion. Hypertrophy of this ligament is one of the major reasons of spinal stenosis. Interspinous Ligaments: The interspinous ligaments connect adjacent spinous processes, and runs obliquely from the anterior inferior aspect of the spinous process above to the posterior superior aspect of the spinous process below. The ligament is thin and membranous, and narrow and elongated in the thoracic region. They meet the ligamentum flavum in front and the supraspinal ligament behind. Supraspinous Ligament: The supraspinous ligament is a strong fibrous cord, which connects together the tips of the spinous processes from the C7 to the sacrum. In the cervical area, it extends as the ligamentum nuchae. The supraspinous ligament consists largely of tendinous fibers derived from the back muscles and is better developed in the upper lumbar region and is often absent in the lower lumbar region. The ligament closely blended with the neighboring fascia. The most superficial fibers of this ligament extend over three or four vertebrae; those more deeply seated pass between two or three vertebrae while the deepest connect the spinous processes of neighboring vertebrae. Between the spinous processes, it is continuous with the interspinous ligament.
MUSCLES
Because most body weight lies anterior to the vertebral column, the many strong muscles attached to the spinous and transverse processes are necessary to support and move the vertebral column. Those muscles and the complex neuromuscular controls is essential to provide spine stability, and to produce balanced spinal motion during physiologic activities. The spinal musculature does not only play an important role in spine stability, motion, and balance; but also interrelate with the upper and lower extremity function. There are two major groups of muscles in the back. The extrinsic back muscles produce and control limb and respiratory movements. The intrinsic (deep) back muscles act on the vertebral column, maintaining posture and producing its movements (see picture).
http://www.scientificspine.com/spinal-anatomy/thoracic-spine-anatomy.html
3/5
2/4/2013
2/4/2013
As all transversospinalis mucles have common origins and insertions, the muscle layers are difficult to accurately separate from each other. They are much shorter muscles, situated deep to the erector spinae, and run obliquely. These muscles originate from transverse processes of vertebrae and pass to spinous processes of more superior vertebrae. They occupy the valley between the transverse and the spinous processes. The semispinalis is the superficial member of the group. It is divided into three parts according to the superior attachments: semispinalis capitis, semispinalis thoracis, and semispinalis cervicis. The multifidus is the middle layer of the group and consists of short, triangular muscular bundles that are thickest in the lumbar region. The rotatores are the deepest of the three layers of transversospinal muscles and are best developed in the thoracic region. As it is stated above, the deep back muscles can be grouped into superficial, intermediate, and deep layers. However, there is also another group, which can be classified as minor deep layer muscles. These are: The interspinal (connects spinous processes), intertransverse (connects transverse processes), and elevators of ribs (represent the posterior intertransverse muscles of the neck) are minor deep back muscles that are poorly developed in the thoracic region.
Last Updated: 08/20/2011 11:59:10 Any comment about this page? Your feedback is appreciated. Please click here.
Spinal Biomechanics | Spine Dictionary | Statistics Guide | Softwares | Miscellaneous | Blog | RSS | Spine Forum | Spine Links | Search | Sitemap
2009 The Scientific Spine. All rights reserved | Terms of Service | About & Contact This is an informational webpage about thoracic spine anatomy
http://www.scientificspine.com/spinal-anatomy/thoracic-spine-anatomy.html
5/5