You are on page 1of 2

Visit CIRCUIT www.deekshith.

in for more unique project ideas and circuits

IDEAS

DIGITAL AUDIO/VIDEO INPUT SELECTOR


T.K. HAREENDRAN eed to connect more than one audio-video (AV) source to your colour television? Dont worry, heres an AV input expander for your TV. It is inexpensive and easy to construct. The working of the circuit is simple

IVEDI S.C. DW

S1 once. To select the second AV signal, press switch S1 twice. In the same way, you can select the other two signals. Momentarily pressing of switch S1 once results in clocking of the decade counter and relay driver transistor T1

and straightforward. Whenever 12V DC is applied to the circuit, power-on LED1 glows. Now reset the decade counter by momentarily pressing switch S2 to make Q0 output of IC1 high. LED2 glows to indicate that the circuit is ready to work. Switch S1 is used for selecting a particular audio-video (AV) signal. To select the first AV signal, press switch

conducts to energise relay RL1. Now normally opened (N/O) contacts of two-changeover relay RL1 connect the television sets inputs to the first AV signal (marked as Video-In 1 and Audio-in 1). LED3 glows to indicate this. When you press switch S1 twice, the Q2 output of IC1 goes high. Consequently, 2C/O relay RL2 (not shown in the circuit) energises and television

inputs are connected to the second AV signal (not shown in the figure). LED4 (not shown in figure) glows to indicate this. Similarly, pressing switch S1 thrice makes the Q3 output of IC1 high. Consequently, 2C/O relay RL3 (not shown in the figure) energises and the television inputs are connected to the third AV signal source. LED5 (not shown in the figure) glows to indicate this. Again, pressing switch S1 four times makes the Q4 output of IC1 high. Consequently, 2C/O relay RL4 energises and the TV inputs are connected to the fourth AV signal source (marked as Video-in 4 and Audio-in 4). LED6 glows to indicate this. Further pressing of switch S1 resets the decade counter and LED2 glows again. Thereafter, the cycle repeats. The circuit is wired for four-input selection, therefore the Q5 output of IC1 is connected to reset pin 15 of IC1. Enclose the assembled PCB along with the relays in a cabinet with the input/output sockets and indicators mounted on the body of the cabinet.

PCB FOR 8085 MICROPROCESSOR KIT (EFY NOVEMBER 99) WITH ALL ITS ICs

Available at:

KitsnSpares
303, Dohil Chambers, 46, Nehru Place, New Delhi 110019; Phone: 26430523, 26449577; E-mail: kits@efyindia.com

108 MARCH 2005 ELECTRONICS FOR YOU WWW EFYMA http://www.deekshith.in/search/label/Projects :Visit for more unique project .ideas G . C O Mcircuits and

Visit www.deekshith.in for more unique project ideas and circuits

Get this project done!


Get the Document + PPT + KIT
Are you interested in doing this project either as your college (mini / major) project or as your hobby? We can help you out. We can provide you with all the documents including documentation, PPT, etc that you need as a student to present this project at your college. Also, if you are in need of the hardware kit for this project, we can provide it to you at a cheaper cost and in little time.
Contact: http://deekshith.in/p/contact.html Email: dkh.hyd@gmail.com Facebook: http://facebook.com/deekshithallamaneni Phone: +919441921293 (Local to Hyderabad, India)

http://www.deekshith.in/search/label/Projects :Visit for more unique project ideas and circuits

You might also like