Professional Documents
Culture Documents
TM
EVERQUARTZ
TM
LAVAcode
TM
DURASTONE HEXAGON
TM
www.voguebay.com
LAVAcodeTM - P10-11
METALUXE TILE
WINDMILL COMBINATION MOSAIC - P18 PLATINUM
TM
COPPER
ALLOY
FLASHING
VORTEX
INSPIRED
BY
FASHION,
NATURE
AND
CULTURE
TM
METALUXE Tiles have passed strict ceramic tile tests, performed by CSIRO in Australia. These tiles can be used for interior and exterior applications and can withstand freeze and thaw
conditions, will not chip nor flake or peel from the porcelain substrate. The use of Durastone porcelain tile as substrate, allows the METALUXE as any other standard porcelain tile.
TM TM
Each METALUXE
tile is a masterpiece handcrafted and finished to the highest standard by Everstone skilled workforce bringing an unrivalled result in design, looks and touch.
6x12
6x24
12x24
www.voguebay.com
www.voguebay.com
DATASHEET
Metaluxe tile is a porcelain tile with real metal surface, available in 5 colors and 4 surface textures. Each tile has been coated with a unique liquefied compound of real metal powder exclusively developed and manufactured by Everstone the leading Australian company. A durable clear protective top layer prevents the Metaluxe metal surface from oxidation on interior and exterior applications. EN-ISO standard assessments on the final products have been carried out by CSIRO (Australia) in line with international ceramic standard requirements.
Installation
Metaluxe tiles should be installed only by an Approved Applicator or qualified tiler following strict instruction: Cutting Metaluxe tiles To cut Metaluxe tiles we strongly recommend the use of diamond blade on a wet tile cutting saw. After cutting, always dry and clean the cut edge to avoid oxidation or water stains. For best result, after drying and cleaning, we recommend to coat the exposed cut edge with a coat of protective clear (see below Touch Up Kit) and allow at least one hour to dry before installation. This will protect and stop the exposed metal from oxidation in the long run. Type of Joint To prevent damaging the tile surface, the use of non-sanded grout is highly recommended. If silicon is used, always protect the tile surface with an easy removable painters tape. The joint should not be filled until tile adhesive cured. Care must be taken in quickly removing the excessive grout from the tiles surface by using a soft sponge and clean water, rinsing the sponge frequently to avoid abrasion marks. Finally, a dry soft cloth should be used to wipe any water residues from the tiles. Cleaning while Installing Always keep tiles clean. During installation, if tile adhesive, grout or silicone is noticed on the surface of the tile, this must be removed immediately. Do not wait till job is complete or grouting product cured.
METALUXE MOSAIC
TM
12x12,6x24sheet.
Maintenance
Maintaining Metaluxe tiles Cleaning of Metaluxe tiles is easy. Clean with warm water and mild detergent only. Never use any solvents, thinners, caustics or powder cleansers. Damaged Metaluxe tiles can be repaired using the Metaluxe Touch Up Kit. This will prolong the life and the beauty of your tiles. Repairing of tiles Metaluxe tile surface is extremely durable but like many other decorative metal surface it can be scratched or damaged. A Touch Up Kit is available for in place repairs. Which is available from most official Everstone distributors.
12x12,6x24sheet.
BLUETOOTH
5/8x4
2x4
CULTURAL BRICK
6X24X3/8SHEET.
ALLOY
ULTIMATE PLUS
6X24X3/8SHEET(NO GAP).
COPPER
PLATINUM
TM
METALUXE
TM
SAMPLE BOX
www.voguebay.com
www.voguebay.com
EVERQUARTZ
TM
TM
CRYSTAL WHITE
BLACK PEARL
GUNMETAL
NATURE
BUSHLAND
MOONSTONE
SANDBANK
BULLNOSE TILE
EVERQUARTZ
TM
COVE TILE
4x12x2 and 4x12x1 available by special order
STEP TREAD
12x12 available by special order
www.voguebay.com
www.voguebay.com 12x12sheet.
TM
DATASHEET
Physical-Chemical Properties
Water Absorption
EN 14411
Standards
ASTM C373 ISO 10545/3
Value(averages)
0.05%/0.07% 0.07%/0.03% Sides max -0.4% Thickness max -1.1%(0.039") Straightness of Sides 0.0% Rectangularity -0.2%( -0.03%) Centre Curvature 0.0% Edge Curvature -0.1% Warpage 0.1%(0.12%) Surface defects 0% 452Ibf 2040N 45.7N/mm 114.3mm 3 128mm
2
Applies to
Super Polished / Honed
Determination of Dimensions
ASTMC648 ISO 10545-4 ISO 10545-4 ASTMC1243 ISO 10545-6 ASTMC372 ISO 10545-8 ASTMC484 ISO 10545-9 AS/NZ 4586-2004 App-A App-A,B(Dual Classification) ASTM C1028 D.M.236-89 AS/NZ 4586-2004 App-B AS/NZ 4586-2004 App-D
All Surfaces
All Surfaces
CRYSTAL WHITE
NATURE
MOONSTONE
All Surfaces
5.2497x10 /C -6 5.95x10 /C
O
-6
All Surfaces
Thermal Shock Resistance Slip Resistance (Pendulum Testers) Slip Resistance (Horizontal Dynamometer) BLACK PEARL GUNMETAL SANDBANK Slip Resistance (Oil Wet Ramp)
No Damage
All Surfaces
Wet:23 - Z Dual: Z 0.87 Dry / 0.42 Wet - 0.78 Dry / 0.60 Wet 0.43 Dry / 0.44 Wet Dry:0.45 - F
Honed
MOSAIC SHUTTLE
12x12SHEET,SUPER POLISHED 40%+HONED 40%+20% GLOSSY GLASS MIXED.
Honed
Chemical Resistance
All Surfaces
Stain Resistance
ISO 10545-14
Passed
All Surfaces
No Damage
All Surfaces
Value 7
All Surfaces
Note:'All Surfaces' averages are based on tests performed on Honed surface tiles and for reference only. Results may vary slightly on the super polished surface.
ST02 NATURE+ES56(MG25)
ST03 MOONSTONE+ES57(MG26)
PACKING
Textures Super Polished/Honed Super Polished/Honed Super Polished/Honed Super Polished/Honed Format 12"x12" 12"x24" 24"x24" 24"x6" m/Box 0.90m 1.08m 1.44m 1.08m Pcs/Box 10 tiles 6 tiles 4 tiles 12 tiles Qty/Box 18.5Kg 22.1Kg 29.3Kg 22.1Kg Boxes/Pallet 66 boxes 56 boxes 36 boxes 48 boxes
ST04 BUSHLAND+ES43(MG23)
ST05 SANDBANK+ES43(MG23)
ST06 GUNMETAL+ES57(MG26)
MOSAIC JETSTAR
12x12SHEET,SUPER POLISHED & GLOSSY GLASS MIXED.
www.voguebay.com
www.voguebay.com
SPECIFICATION
Physical-Chemical Properties Standards Value(averages)
0.02% Length max 0.1% Thickness max - 1.1% Straightness of Sides max 0.0% Rectangularity max 0.4% Centre Curvature max 0.0% Edge Curvature max 0.0% Warpage max 0.1%
EN 14411
Applies to
All Surfaces
Water Absorption
ISO 10545/3
Determination of Dimensions
ISO 10545-2
Breaking Strength Module of Rapture Abrasion Resistance Linear Thermal Expansion Thermal Shock Resistance Slip Resistance (Pendulum Testers) Slip Resistance (Horizontal Dynamometer)
1740N
All Surfaces
49.9N/mm2
All Surfaces
113mm3
All Surfaces
6.1(10 /C )
-6
All Surfaces
No Damage
All Surfaces
AS/NZ 4586-2004
Wet:49- W Wet:49- W Wet:49- W Dry 0.79; Wet 0.49 Dry 0.65; Wet 0.46 Dry 0.91; Wet 0.75 Dry 0.90; Wet 0.76 Dry 0.89; Wet 0.82 6.5 34.5 34.2 32.3
O O O O
Cross hatched Flamed Combed Super-Polished Honed Cross hatched Flamed Combed Honed Cross hatched Flamed Combed All Surfaces except Super-Polished and Honed
ASTM C1028
AS/NZ 4586-2004
Passed
Chemical Resistance
LAVACODE TILE - - CROSS HATCH (12X12)
TM
Passed
All Surfaces
No Damage
All Surfaces
Value 7
All Surfaces
WITHIN V2
All Surfaces
Note: Test results are for reference only and product result may vary from one batch to another and from color to color. For strict application requirements, we recommend to have product retested for compliance.
FLAMED
SUPER POLISHED
MATTE
HONED
CROSS HATCH
COMBED
10
11
www.voguebay.com
www.voguebay.com
24x20-3/4x3/8piece.
E ) TT LA ATTE M (
CO ) CO ATTE M (
T RE NC ) CO ATTE (M
A UN AL EM E) CR ATT (M
NO ICI TT ) BO ATTE (M
IVE ) OL ATTE (M
Y RE LG EE TE) ST AT (M
Y RE HG ) AS ATTE (M
E IG BE ND E) SA ATT (M
AL CO AR ) CH ATTE (M
de co VA D) LA ONE (H
DURASTONE HEXAGON MOSAIC - - STEEL GREY(MIXED FINISHES)
12
13
www.voguebay.com
www.voguebay.com 3-5/16x3-13/16x3/8piece,10-3/8x12x3/8sheet.
CONCRETE
LATTE
COCO
CREMA LUNA
STEEL GREY
CREMA LUNA
BOTTICINO
LATTE
COCO
BOTTICINO
OLIVE
CONCRETE
ASH GREY
OLIVE
SAND BEIGE
ASH GREY
CHARCOAL
STEEL GREY
CHOC
CHARCOAL
LAVAcode MATTE/COMBED/FLAMED
14
15
www.voguebay.com
www.voguebay.com
CREMA LUNA
BOTTICINO
LATTE
COCO
CONCRETE
ASH GREY
OLIVE
SAND BEIGE
NOCE
DURASTONE DIAMOND MOSAIC - - SAND BEIGE
STEEL GREY
CHOC
CHARCOAL
16
17
www.voguebay.com
TM
CREMA LUNA
LATTE
CONCRETE
COCO
BOTTICINO
ASH GREY
OLIVE
SAND BEIGE
NOCE
STEEL GREY
CHOC
CHARCOAL
LAVAcode
18
$10.00
w w w. v o g u e b a y. c o m for samples email: samples@voguebay.com for marketing and ASTM tests email: marketing@voguebay.com
EAST COAST 709 Middle Ground Boulevard, Suite B - 104, Newport News, VA 23606 Phone: 1-757-327-0880 Fax: 1-757-327-0885 WEST COAST 3004 Alvarado Street, Unit I, San Leandro, CA 94577 Phone: 1-510-357-0880 Fax: 1-510-357-0886
PROUD SUPPLIER OF