Professional Documents
Culture Documents
F1 Food groups
Food Any substance, whether processed, semi-processed or raw, which is intended for human consumption, and includes drink, chewing gum and any substance which has been used in the manufacture, preparation or treatment of food, but does not include cosmetics or tobacco or substances used only as drugs Codex Alimentarius (FAO/WHO) denition 2005.
Learning objectives
Distinguish between a food and a nutrient Describe the chemical composition of lipids, carbohydrates and proteins
Nutrients
A nutrient is any substance obtained from food and used by the body to provide energy, to regulate growth or to maintain and repair the bodys tissues. Any item of food will contain at least one, and possibly many, dierent types of nutrient. For example, bread is food and contains several nutrients including carbohydrates, proteins and lipids. Any substance that does not contain usable nutrients is not food. There are seven principal classes of nutrient: carbohydrate protein lipid (fats and oils) minerals vitamins water bre is sometimes included because, although it is not absorbed by the body, it is required for the maintenance of a properly functioning intestinal tract.
Examiners tip The words lipid and fat may be used interchangeably in many texts and exam questions.
Carbohydrate
Carbohydrates contain only the elements carbon, hydrogen and oxygen. The most basic carbohydrates, which are often referred to as simple sugars, are called monosaccharides. Examples of monosaccharides include glucose, fructose and galactose. They contain carbon, hydrogen and oxygen in the ratio 1 : 2 :1 and therefore can be represented by the empirical formula CH2O. Monosaccharides can exist in two structural forms: linear or cyclic (Figure F1). In the cyclic form, the carbonyl group is broken to produce an intramolecular oxygen bridge (see Figure F1). The hydroxyl groups remain unchanged. In the linear form, monosaccharides contain a carbonyl group (C=O) as part of either an aldehyde (e.g. glucose) or a ketone (e.g. fructose) and at least two hydroxyl (alcohol) OH groups. Monosaccharides can be combined to produce more complex carbohydrates such as disaccharides, e.g. sucrose and maltose (Figure F2)
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
The structure of carbohydrates is discussed in more detail in Option B, page 11 on the CD-ROM.
In solution, the cyclic form of a monosaccharide predominates, with only a small fraction existing as the linear structure.
F FOOD CHEMISTRY
Fischer projection is a twodimensional representation of a three-dimensional molecule. In the projected structure, horizontal bonds represent groups pointing towards the viewer and vertical bonds represent groups pointing away from the viewer.
a H C H HO H H C C C C
O CH2OH OH H OH OH HO H H C O C C C H OH OH
b CH2OH H C HO C H OH C H O H C OH OH C H
CH2OH
CH2OH
Figure F1 (a) The chemical structures of glucose (left) and fructose (right) in Fischer projection; (b) a cyclic form of glucose.
and polysaccharides (e.g. starch and cellulose). When monosaccharides are joined together, they release a molecule of water in a condensation reaction. The bond formed between the monomers is called a glycosidic bond and contains another oxygen atom that bridges the gap between two monosaccharide units.
CH2OH H HO O H OH H H OH H O H CH2OH O H OH H H OH OH H
Protein
Some proteins also contain the element sulfur. Protein always contains the elements carbon, hydrogen, oxygen and nitrogen. Proteins are polymers of smaller sub-units called amino acids (or, more precisely, 2-amino acids). The smallest protein (called a dipeptide) contains just 2 amino acids but many proteins contain thousands of amino acids. Amino acids contain an amine group (NH2) at one end and a carboxylic acid group (COOH) at the other. The central carbon contains a bond to a variable group, R (Figure F3). Amino acids are sometimes referred to as 2-amino acids to indicate that the amine group is on the second carbon of the carboxylic acid (position 1) main chain. When two amino acids join together in a condensation reaction (water eliminated) they form a peptide bond which contains the amide (CONH) functional group (Figure F3).
The structure of proteins is discussed in more detail in Option B, page 2 on the CD-ROM.
Lipids
Lipids contain only the elements carbon, hydrogen and oxygen. Lipids may be split into two classes: oils (usually from plant sources and liquids at room temperature) and fats (usually from animal sources and solids at room temperature).
a H N H R C H C O H HO b O O C H C CH2 N H H c H H N H C H O C H N H C H C OH O
SH Figure F3 (a) The general structure of an amino acid; (b) the sulfur-containing amino acid methionine; (c) a dipeptide molecule containing a peptide bond.
peptide bond
F FOOD CHEMISTRY
ester groups
H H H H H H H H H H H H H H H C C C C C C C C C C C C C C C C H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H C C C C C C C C C C C C C C C C H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H C C C C C C C C C C C C C C C C H H H H H H H H H H H H H H H H
H C O O H C O O H C O H
Lipids are triester molecules, formed by reacting three longchain fatty acid molecules with the three hydroxyl (OH) groups of a glycerol (propane-1,2,3triol) molecule. The resultant compounds are often referred to as triglycerides (Figure F4).
Test yourself
1 Give the molecular formula of the molecule, X, shown and explain to which food group it belongs.
CH2OH H HO O H OH H H OH H OH
2 The molecule in Question 1 can react with another molecule in a condensation reaction to form the compound, Y, below. Work out the molecular formula of Y and give the structure of the molecule, Z, that must react with X to form Y.
CH2OH H HO O H OH H H OH H HOCH2 H O OH H O HO CH2OH H
Learning objectives
Describe the structure of saturated and mono-unsaturated fatty acids and understand how structure aects melting point Deduce the stability of a lipid from its structure Describe the hydrogenation of unsaturated fats and its advantages and disadvantages
F FOOD CHEMISTRY
Unsaturated
Unsaturated fatty acids contain one (mono-unsaturated) or several (poly-unsaturated) C=C double bonds. They therefore do not contain the maximum number of hydrogen atoms in the carbon chain. In a typical, naturally occurring lipid (oil or fat), there will be a mixture of saturated, mono-unsaturated and poly-unsaturated fatty acids (Figure F6). For example, butterfat (the main fat found in cows milk) contains predominantly saturated fatty acids. Table F1 compares the composition of butterfat to olive oil and sunower oil, which are both derived from plants.
a HO b HO c HO Figure F6 (a) Elaidic acid; (b) linoleic acid; (c) arachidonic acid. O
Olive oil 15 70 15
Sunower oil 10 20 70
Fats and oils are categorised according to the predominant type of fatty acid present. Thus butterfat is classed as saturated, olive oil as monounsaturated and sunower oil would be classed as poly-unsaturated.
Solid or liquid?
In general, saturated fatty acids will tend to be solid at room temperature, while mono- and poly-unsaturated ones will remain liquid. Lipid-rich foods can have very dierent physical properties. For example, beef dripping is a solid at room temperature but vegetable oil stays liquid even when placed in the fridge. The reason for this dierence depends mainly on the structure of the fatty acids that make up the predominant triglyceride in the food.
Degree of crystallisation
Degree of crystallisation is another way of describing the property of solidication (i.e. how likely a substance is to be a solid) and is directly related to a fats melting point. There are three main factors that aect the melting point of a fat: relative molecular mass (length of fatty acid chains), degree of unsaturation and nature of the double bonds (cis or trans).
F FOOD CHEMISTRY
Effect of unsaturation
Unsaturation (C=C bonds) in the hydrocarbon chain decreases the degree of crystallisation of lipids and they are more likely to be oils; this is why oils are a source of mono- and poly-unsaturated fatty acids. Some examples of saturated and unsaturated lipids are shown in Table F2. Mono- and poly-unsaturated fatty acids generally have lower melting points than saturated fatty acids of similar relative molecular mass, because the double bond(s) causes many of them to adopt a kinked or curled structure (see Figure F7). The greater the number of double bonds (i.e. the more unsaturated the molecule) the more distorted the chain will become, and hence the lower the melting point.
H3C C
C
CH3 H
C
CH3
trans-but-2-ene
Name of food butter lard shortening palm (oil) coconut (oil) olive oil peanut oil safower oil sunower oil corn oil cod liver oil linoleic acid linolenic acid
State at room Approximate temperature melting point / C solid solid solid solid solid 35 30 45 37 26 0 2 10 17 17 11 5 5 11
mono-unsaturated liquid mono-unsaturated liquid poly-unsaturated poly-unsaturated poly-unsaturated poly-unsaturated poly-unsaturated poly-unsaturated liquid liquid liquid liquid liquid liquid
F FOOD CHEMISTRY
In the trans isomer, the carbon chain remains straight and so contact points between chains are maximised; thus the strength of van der Waals interactions is greater. This means that trans fatty acids have a higher melting point than their cis isomers, which are kinked or bent and have a reduced number of potential contact points (Figure F7).
a trans double bond
c H O
Figure F7 (a) Trans double bonds: chain is fairly straight; (b) cis double bond causes a kink in the chain; (c) cis double bonds cause the chains to be kinked and molecules cannot pack together as well.
Stability
In general, fats that contain predominantly saturated fatty acids are more stable than those classied as mono- or poly-unsaturated. This is due to the reactivity of the C=C double bond(s) present in the latter two. The absence of a reactive functional group in saturated fatty acids renders them fairly inert. Saturated fats are more stable than unsaturated fats. They go rancid at a slower rate. The C=C double bond in unsaturated fats may undergo a number of reactions: reaction with oxygen (auto-oxidation), reaction with hydrogen (hydrogenation), in the presence of light (photo-oxidation) and with enzymes/heat/water (hydrolysis).
Rancidi cation is the process by which fats, oils and other lipids undergo chemical decomposition.
aldehydes and ketones. The mechanism involves the production of highly reactive free radical species. Generally, the more unsaturated fatty acids present in a fat, i.e. the greater the number of double bonds present, the faster the rate of oxidation.
Hydrogenation
In this process, hydrogen gas is added across the double bond(s) present in mono- or, more usually, poly-unsaturated vegetable oils at a high temperature (140225 C) and pressure in the presence of a nickel, zinc or copper catalyst. This increases the saturated character of a fat (partial hydrogenation) and is used to turn liquid vegetable oils into semi-solid or solid fats; for example, margarine. Generally, the degree of saturation in the hydrogenated product is not 100% and, by carefully controlling the conditions, the percentage saturation can be varied to yield partially hydrogenated products with dierent physical properties and uses. Hydrogenation is also used to produce other semi-solid fats used for baking.
Advantages of hydrogenation Partially hydrogenated vegetable oils are cheaper to produce than saturated fats from animals, and they also have an increased shelf life over their fully unsaturated precursors as the rate of oxidation decreases with increased saturation. Hydrogenation also increases hardness and plasticity (stiness) of the products. Disadvantages of hydrogenation Clinical evidence points to health benets from a diet containing more mono- and poly-unsaturated fats than saturated. Saturated fats are more damaging to the heart and circulatory system. In addition, in the hydrogenation process, cis fatty acids can isomerise into the trans form. These have been implicated in a number of cardiovascular diseases. The body nds it dicult to metabolise trans fatty acids (lipase enzymes seem to recognise only cis forms) and so they tend to accumulate in the adipose (fatty) tissue rather than be excreted. Trans fatty acids also cause an increase in more harmful forms of circulating cholesterol such as low density lipoprotein (LDL). Finally, trans fats are a poorer quality source of energy compared to their cis counterparts.
An enzyme is a biological catalyst that speeds up a specic biochemical reaction. Enzymes are proteins with a unique threedimensional structure.
F FOOD CHEMISTRY
Test yourself
3 The formulas of some fatty acids are shown below. Deduce the number of C=C bonds in each and classify them as saturated, mono-unsaturated or poly-unsaturated. C15H23COOH C13H27COOH C19H35COOH C17H33COOH 4 Arrange the following fatty acids in order of increasing melting point (lowest rst). C19H39COOH C17H35COOH C17H31COOH
Learning objectives
F3 Shelf life
Shelf life is the period of time for which a food retains the desired qualities expected by the consumer, such as avour, texture and appearance. Once a foods shelf life has been exceeded it is considered unsuitable for human consumption due to changes in the properties described above as well as the potential for microbial spoilage. In most supermarkets, best before dates are displayed clearly on packaging. These indicate the supermarket or manufacturers estimate of the foods shelf life. Many items of food may still be edible beyond this date, but the food will not be in its optimum state. Shelf life is dierent to the expiration or use by dates, after which a food product may become harmful.
Understand the factors that aect the shelf life of a food Describe hydrolytic and oxidative rancidity of fats and how they can be reduced Describe traditional methods for extending shelf life Discuss natural and synthetic antioxidants including their structural features, sources, advantages and disadvantages of use
Water content
Changes in the water content can alter the texture of food (e.g. if breakfast cereal absorbs water it becomes less crisp). There are several other reasons why changes in water content aect the shelf life of food. The abundance of water increases the rate of hydrolysis and can lead to rancidity (due to hydrolysis of fats). Changes in water content can also result in degradation of nutrients such as vitamins, proteins and starch. Changes in water content can also increase the rate of non-enzymatic and enzymatic browning of food (the process in which foods literally turn the colour brown), which is undesirable in foods such as fruits, vegetables and seafood. The rate of these processes is a maximum at an intermediate level of water content. Bacteria nd it easier to multiply in foods containing higher quantities of water drying or salting foods can increase their shelf life by reducing water content. These preserved foods are, however, particularly vulnerable to bacterial spoilage should they absorb moisture.
F FOOD CHEMISTRY
Light
Light can cause rancidity in fats by the process of photo-oxidation (see page 7). Exposure to high light levels can also lead to chemical changes in many of the common vitamins, causing them to degrade more rapidly and rendering them less useful. Light is also able to bleach the natural dyes present in many foods, causing colours to fade. Appropriate packaging should be used to reduce exposure of the food to light.
Temperature
Raised temperatures generally act to increase the rate at which processes such as hydrolysis, photo-oxidation and microbial growth occur, thus reducing the shelf life of products. Keeping food in a cool, dry environment such as a pantry or fridge helps to alleviate the eect of raised temperature.
Rancidity
Rancidity is a descriptive term relating to our perception of the avour of fats and oils: specically, those avours that we perceive as unpleasant, indicating a food has gone o or is starting to spoil. Rancidity will be manifest as disagreeable changes in taste, smell, texture and appearance (Table F3).
Name of fatty acid Substance(s) detected in butanoic acid hexanoic acid octanoic acid palmitic acid oleic acid stearic acid lauric acid milk, butter milk milk chocolate chocolate chocolate palm/coconut oil, cocoa butter substitutes Characteristic smell/taste vomit goats, farmyard animals musty, acrid oil, soap wax, lard oil, fat soap
Table F3 Various off-smelling naturally occurring fatty acids and their associated odours.
F FOOD CHEMISTRY
Hydrolytic rancidity
This is the process by which fats and oils are broken down into their constituent fatty acids and glycerol (Figure F8). The process can be speeded up by increased water content, the presence of enzymes (e.g. lipase), high (OH) or low (H+) pH values and raised temperatures. During deep-fat frying, the extremely high temperatures and presence of water in foods can lead to rapid rancidication.
H H H H C C C H
triglyceride
H C C C H
glycerol fatty acid
OH OH + 3C17H35COOH OH
Figure F8 The hydrolysis of a triglyceride to yield one molecule of glycerol and three molecules of fatty acid.
Oily sh, like mackerel and herring, which contain polyunsaturated fatty acids such as eicosapentaenoic acid (EPA) with ve C=C double bonds, are particularly susceptible to rancidication.
Oxidative rancidity
The fatty acid chains liberated by hydrolysis can undergo oxidation via auto- and photo-oxidation in a free radical chain reaction; enzymes may also catalyse the mechanism. In this process, oxygen adds across C=C double bonds of unsaturated fatty acids and causes them to break down into unpleasant smelling and tasting volatile compounds such as ketones, aldehydes as well as some alcohols. The greater the degree of unsaturation present, the more predisposed a lipid will be to oxidative rancidication.
Processing
Low temperature storage/refrigeration reduces the rate of lipasecatalysed hydrolysis, particularly in dairy products. The lipase enzyme works best at its optimum temperature of around 37 C. Decreasing exposure to light by storing food in a dark environment (e.g. in a cupboard or pantry), or by using coloured glass for storage vessels will reduce the rate of adverse photochemical reactions. Reducing moisture content by using methods such as salting, crystallising (adding sugar) and smoking decreases the eects of hydrolysis and microbial spoilage.
Packaging
Inert gas Filling packaging with an inert gas to expel atmospheric oxygen reduces the rate of auto- and photo-oxidation. Classic examples include lling packets of crisps (US: chips) and other snack foods with nitrogen.
10
F FOOD CHEMISTRY
Hermetic sealing Using a lm packaging around the food, prevents it from coming into contact with oxygen in the air. Low-gas-permeability lm can be used as an alternative. Most fresh meat tends to be sold in hermetically sealed packaging. Minimising the amount of air present This is used especially in bottled and canned foods. Reducing the quantity of air present at the top of the vessel will decrease the rate of oxidation.
Adding additives
Sodium sul te (Na2SO3), sodium hydrogensul te (NaHSO3) and citric acid are added to foods as oxygen scavengers and help to prevent non-enzymatic browning. The sultes are commonly added to fresh meat and dried fruit; citric acid is often used to preserve soft drinks. Sodium and potassium nitrite and nitrate (NaNO2, NaNO3, KNO2, KNO3) are used to cure meat and sh, prevent the growth of bacteria and moulds and also as colour xatives. Sodium benzoate (C6H5COONa) and benzoic acid (C6H5COOH) are used as preservatives preventing the growth of microbes in fruit juices, carbonated drinks and pickled foods (Figure F9). Sorbic acid (C5H7COOH), propanoic acid (C2H5COOH), sodium and calcium propanoate (C2H5COONa and (C2H5COO)2Ca) can be added to bread and cheese to delay the growth of bacteria, yeasts and other moulds (Figure F10). Ethanoic acid (CH3COOH) and benzoic acid prevent mould and bacterial growth in pickled meat and sh products. They also add to the avour.Vinegar is a solution of ethanoic acid.
a H C HC3 H C O C b H3C CH2 O C OH
The sulte, SO32, ion is also called the sulfate(IV) ion. The nitrite, NO2, ion is also called the nitrate(III) ion.
O OH
O C OH
Osmosis is the passive process by which water moves from a region of low solute concentration (dilute solution) to a region of high solute concentration, through a partially permeable membrane (e.g. the cell membrane).
F FOOD CHEMISTRY
11
Drying and smoking are other techniques with a long heritage. They also work by reducing the water content of foods. Smoked salmon and cured meats such as Parma ham and Westphalian ham are examples of foods preserved by this method.
Antioxidants
Antioxidants are substances that delay the onset or slow down the process of oxidation. They are commonly used as preservatives to extend the shelf life of foodstus. Naturally occurring antioxidants include vitamin C, vitamin E, -carotene and selenium.
Vitamin C (Figure F12) is found in high levels in citrus fruits, green-leaf vegetables, broccoli, green peppers, strawberries, raw cabbage and potatoes. It is broken down by cooking at high temperature and also dissolves in water during boiling.
Vitamin E
Vitamin E (Figure F13) is a fat-soluble antioxidant found in wheatgerm, nuts, seeds, whole grains, green-leaf vegetables, soya beans and vegetable oils such as canola.Vitamin E is part of a family of compounds called tocopherols. This family contains a number of compounds with vitamin E activity, based around a similar chemical structure to that in Figure F13, containing a methylated phenol group.
CH3 HO CH3 H3C CH3 Figure F13 Vitamin E. O CH3 CH3 CH3 CH3
-carotene
-carotene
(Figure F14) is a precursor to vitamin A. It is highly fat-soluble and has a vivid red-orange colour. -carotene is found in high quantities in carrots, squash, pumpkin, broccoli, sweet potato, tomato, kale cabbage, cantaloupe melon, peaches and apricots.
CH3 CH3 CH3 H3C H3C
CH3
CH3
CH3
Selenium
Selenium is found in sh, shellsh, red meat, eggs, grains, chicken and garlic.
OH
Synthetic antioxidants
Synthetic antioxidants act as free-radical scavengers preventing oxidation via a free radical mechanism. The structures of some synthetic antioxidants are shown in Table F4. The phenol group is common to all these compounds (Figure F15).
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
12
F FOOD CHEMISTRY
Structure
ether group
Arrangement 2- and 3-tert-butyl-4-hydroxyanisole (BHA): differ by the position of the tertiary butyl group, (CH3)3C, on the phenolic ring structure. 3-BHA is the more effective antioxidant but commercially a mixture is used. The COCH3 group is called an ether group. Specically this is an aromatic ether.
CH3 O
OH CH3 O
3-tert-butyl-4-hydroxyanisole (3-BHA)
3,5-di-tert-butyl-4-hydroxytoluene (BHT) Contains a phenolic ring as well as two tertiary butyl side chains. Toluene is an alternative name for methylbenzene.
CH3 OH HO OH
H H H C O
ester group
O C C C H H H H
OH OH
2,4,5-trihydroxybutyrophenone (THBP)
HO C O
ketone group
H H H C C C H H H H
OH C
tert-butylhydroquinone (TBHQ)
F FOOD CHEMISTRY
13
Free radicals are chemical species that contain an unpaired electron. This causes them to be highly reactive. In a biological setting, free radicals such as the hydroxyl radical (OH) and superoxide radical (O2) can be generated from the metabolism of oxygen. Due to their reactive nature they can cause signicant cellular damage by reacting with proteins, lipids and DNA, leading to inactivation of enzymes, degradation of the cell membrane and mutation of the genetic code, among many other eects.
Naturally occurring antioxidants have been shown to reduce the risk of heart disease and cancer by acting as free radical scavengers, preventing the damaging eects of these very reactive species. Vitamin C is essential for the synthesis of many hormones and the connective protein, collagen. It acts as a reducing agent in important enzymatic processes, transferring electrons to the enzymes when required. -carotene can be added to margarine to provide colouring (yellow colour). It is also the principal precursor in the synthesis of vitamin A. Public consensus suggests that antioxidants are perceived as being benecial for healthy living and can be useful in the prevention of disease and ageing.
Disadvantages
Synthetic antioxidants are generally perceived by the public to be less eective and possibly less safe because they are not naturally occurring. Natural antioxidants add colour and an aftertaste that is not always pleasant to foods. They also tend to be less eective at reducing the rate of oxidation when compared to their synthetic alternatives. There is a signicant amount of legislation, policy and scientic testing that must be in place before synthetic antioxidants can be used in food. This is needed to ensure that they are safe for human consumption. Across the globe and especially in developing countries, it is often very dicult to ensure the correct implementation and monitoring of the safe use and labelling of food additives in food.
dark chocolate
14
F FOOD CHEMISTRY
Test yourself
5 The molecule shown here has been synthesised as a potential antioxidant. Copy the molecule, then circle the tertiary butyl group and identify any other functional groups present.
H3C O OH OH O H H C C C H H C(CH3)3
F4 Colour
A dye is a food-grade, synthetic, water-soluble colourant. A pigment is a naturally occurring colourant found in the cells of plants and animals.
Learning objectives
Occurrence of colour
Naturally occurring pigments possess colour due to their ability to absorb dierent wavelengths of visible light and transmit or reect the portion of the spectrum that has not been absorbed. The transmitted or reected light is the complementary colour to the light absorbed. Thus a compound which absorbs the blue-green wavelengths of light will appear red-orange (Figure F17).
orangeyellow orange
Explain the occurrence of colour in naturally occurring pigments, including the range of colour and sources of carotenoids, anthocyanins, chlorophyll and heme Describe the factors that aect stability of colour in carotenoids, anthocyanins, chlorophyll and heme Discuss the issues associated with the use of synthetic colourants Understand the dierence between caramelisation and the Maillard reaction in the browning of food
redorange
Chlorophylls are the green pigments that give most plant leaves their characteristic colour. Chlorophylls have a complex structure containing multiple C=C double bonds that allow the compounds to absorb specic wavelengths of light in the visible spectrum. Chlorophyll a (Figure F18) absorbs visible light in the blue (400500 nm) and red (620700 nm) regions of the visible spectrum. It does not absorb light in the green
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 F FOOD CHEMISTRY 15
N Mg2+ O N
O O
O H
400
violet
500
blue
600
green yellow
700
red
800
infrared
Wavelength / nm
Figure F18 (a) The structure of chlorophyll a; (b) its visible light spectrum.
part of the spectrum (500600 nm) and so these wavelengths of light are transmitted. Chlorophylls therefore appear green as do the leaves in which these compounds are found in high concentrations. Foods may have colour due to the presence of naturally occurring pigments or the addition of articial dyes. Dyes appeared coloured for exactly the same reasons as described above.
Anthocyanins
Anthocyanins are the most widely occurring pigments in plants. They all have a characteristic structure based on the same core unit. Anthocyanins are the principal pigments responsible for the pink, red, blue and purple colours of many fruits and vegetables including red cabbage, blackcurrants, strawberries, cranberries, blueberries, raspberries and grapes (Figure F19).
OCH3 OH
+ O
OH OH
+ O
HO
OCH3 O HO HO O OH OH
HO
OH O HO HO O OH OH
OH
OH
Figure F19 (a) Oenin found in purple grape skin; (b) myrtillin found in blackcurrants and blueberries.
16
F FOOD CHEMISTRY
a H3C
CH3
CH3
CH3 OH
H3C H3C
CH3 CH3
CH3
CH3
CH3
Carotenoids
Carotenoids are the most widespread pigment found in nature; primarily due to their abundance in algae. Many of the carotenoids are precursors of vitamin A. The structural similarities between vitamin A and -carotene can be seen in Figure F20. Carotenoids generally transmit or reect longer wavelengths of the visible spectrum (absorb in the blue-violet region) and so have colours in the yellow-orange-red region. Carotenoids are present in bananas, carrots, tomatoes, watermelon, sweet peppers and saron (Figure F21). The red carotenoid astaxanthin (Figure F22), when it is complexed with protein, gives live lobsters and crabs their blue-green hue. When the shellsh is cooked, the astaxanthin becomes dissociated from the protein and the shell turns red. Astaxanthin is also responsible for the deep pink colour of wild salmon. Farmed salmon are fed supplements that include astaxanthin so that their esh matches the colour of wild salmon. a
a CH3 CH3 CH3 CH3 CH3 CH3 CH3 CH3 OH b b OH HO HO
O O
CH3 CH3
CH3 CH3
OH OH OH
O O
OH OH OH OH OH
OH HO HO HO HO O HO HO HO HO OH O O O OH OH OH O O O O O O
CH3 CH3
O O O O
O O OH OH
Figure F21 (a) Lycopene found in tomatoes and watermelons; (b) crocin found in saffron. OH
F FOOD CHEMISTRY
17
HO O
CH3
CH3
CH3
H3C
CH3
CH2 H C H3C N HC N H 3C C H Fe
2+
CH3
Chlorophylls
These are the major pigments in green plants responsible for harvesting light energy the rst stage in the process of photosynthesis.
CH2
N CH N
Heme
Heme is the red pigment found in the haemoglobin of red blood cells and the myoglobin of muscle tissue (Figure F23). The heme in myoglobin is what gives meat its purple-red colour.
CH3
HOOC
Numerous factors aect the stability of pigments.Variation in these factors may result in the loss or change of pigment colour. Major factors aecting pigment colour are: temperature, pH, oxidation, presence of metal ions and the oxidation state of these metal ions. These factors contribute to changes in the structure of the pigment and/or the way in which it absorbs certain wavelengths of light.
Effects on anthocyanins
(A)
Anthocyanin Structural form (A) (AH ) (B) (C)
+
(AH+)
(B)
(C)
In aqueous solution, anthocyanins exist in a complex equilibrium between four dierent structural forms (Table F6). The position of the equilibrium depends on the pH and temperature of the solution. At low pH (13) the red avylium form predominates. When the pH is increased, the blue quinoid (pH 67) and colourless carbinol (pH 45) forms may be produced. In basic conditions, the chalcone is formed.
flavylium cation (red)
OH HO OH
carbinol
HO
O+
OH
OH
OH
pH 12
OH
OH
pH 45
OH HO OH
chalcone
OH H OO OH
OH
pH 67
OH
pH > 7
18
F FOOD CHEMISTRY
At low temperatures, the coloured forms are abundant, but as the temperature rises, the equilibrium shifts to the right causing the pigments to lose their colour. This also causes them to lose their potent antioxidant ability, which leads to browning of the food. Anthocyanins are able to form vivid, deep-coloured complexes with Al3+ and Fe3+ ions. These metal ions can come from the packaging in canned fruit and often causes discoloration in these food products.
Effects on carotenoids
Due to the presence of a conjugated, multiple C=C double bond system, carotenoids are not only coloured but highly susceptible to photo-oxidation and oxidation by metals and organic hydroperoxides (ROOH). On oxidation, the conjugation is destroyed and the pigment is bleached (decolorised). The oxidised species are also unable to be converted to vitamin A and often have an unpleasant odour. Carotenoids are thermally stable up to 50 C and structurally stable in acidic conditions (pH range 27). They tend, therefore, to withstand most forms of food processing without being degraded. When heated above 50 C, however, the abundant naturally occurring all-trans form rearranges to yield a variety of cis isomers.
A conjugated system is a system of alternating C=C double bonds and CC single bonds.
Effects on chlorophylls
Chlorophylls can be destabilised by high temperatures depending on the pH of the environment. In an alkaline solution (pH 9), chlorophyll remains stable, but in an acidic solution (pH 3) it is highly unstable. When plant material is heated, i.e. cooked, the plant cell membranes break down and cause acid to be released, thus decreasing the pH of the surrounding solution. The magnesium ion located at the centre of the porphin ring (see Figure F18a on page 16) is normally stable and dicult to remove, but at low pH, the Mg2+ ion is displaced by two H+ ions, resulting in formation of an olive-brown pheophytin complex. Generally, brighter-green vegetables are viewed as more appealing than darker coloured ones; by reducing cooking time and boiling vegetables with the pan lid o to allow the escape of volatile acids, the production of pheophytin and discoloration can be minimised. Adding a small amount of sodium hydrogencarbonate (bicarbonate of soda, NaHCO3) to the water during boiling may also help to keep the vegetables green as this raises the pH. The heat-induced cellular degradation can also predispose the chlorophyll pigments to photo-degradation in which they chemically decompose in the presence of light.
Heme
Freshly cut meat has a purple-red appearance due to the predominance of the pigment myoglobin in the tissue. If freshly cut meat is exposed to air it changes colour within an hour. When oxygen in the air binds to the purple-red myoglobin (Mb) it forms oxymyoglobin (MbO2) which is red the colour most people associate with meat being fresh. In both these complexes, the iron ion at the centre of the heme porphyrin ring
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 F FOOD CHEMISTRY 19
(see Figure F23 on page 18) is in the +2 oxidation state (Fe2+). However, if meat is left exposed to air for several days, the myoglobin and oxymyoglobin undergo auto-oxidation in which Fe2+ is oxidised to Fe3+ which results in the formation of metmyoglobin (MMb) which has an undesirable brownred colour and indicates that the meat is no longer fresh.
oxidation
deoxygenation oxidation
myoglobin (Mb)
oxygenation
metmyoglobin (MMb)
reduction
purple-red (Fe2+)
brown-red (Fe3+)
This interconversion between the three forms of myoglobin happens readily. Formation of metmyoglobin in meat products can be reduced by packaging the food in low-gas permeability lm or hermetically sealing them in oxygen-free conditions. The storage gas used in the packaging of many meat products is 100% CO2, which prevents oxidation from occurring and the meat from discolouring.
Non-enzymatic browning
There are two principal processes by which non-enzymatic browning of foods occurs: the Maillard reaction and caramelisation.
20 F FOOD CHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
The brown colour of chocolate does not come from the Maillard reaction as cocoa is naturally brown. However, the Maillard reaction is partly responsible for the avour of milk chocolate.
Caramelisation
Caramelisation is a form of non-enzymatic browning that occurs in foods with a high content of carbohydrates, especially sucrose and reducing sugars. Nitrogen-containing compounds must be absent otherwise the Maillard reaction will occur. Caramelisation involves the process of pyrolysis, in which a high temperature causes the sugars to oxidise and decompose to form volatile compounds that may then go on to polymerise. The products of decomposition give food its resultant nutty, caramel-like aroma, while the products of polymerisation make the food light-brown. Baked-egg dishes go brown on top as a result of caramelisation. The rate of caramelisation can be increased by catalysis with a base (pH > 9) or an acid (pH < 3), as well as by using high temperatures in excess of 120 C, which occur when baking and roasting foods with a high sugar content. When foods are boiled, neither caramelisation nor the Maillard reaction occur appreciably as the temperature is not suciently high. Many recipes therefore suggest that meat is browned and vegetables such as onions are caramelised to develop avour and colour before they are cooked using a method requiring a temperature below 100 C (e.g. stewing).
Examiners tip Despite the obvious name, caramel is not formed by caramelisation but rather by the Maillard reaction.
Test yourself
6 Use the colour wheel on page 15 to suggest the colour of compounds that absorb the following colours of visible light: a green b orange c red 7 Name two classes of naturally occurring pigments.
F FOOD CHEMISTRY
21
Learning objectives
Understand what is meant by a genetically modied organism Discuss the advantages and disadvantages of using genetically modied foods
In the transgenic pig, the inserted gene designed to make the pig produce more omega-3 oils came from the microscopic nematode worm, Caenorhabditis elegans.
Benets of GM foods
1 Increased yield and nutritional content of crops of particular benet to developing countries with exploding populations and those prone to famine or endemic malnutrition. So-called Golden Rice has been genetically modied by inserting genes from daodil and a bacterium, so that it is enriched with vitamin A. Increasing yield also permits diversication in the uses of some crops (e.g. use of vegetable oils as biofuel a renewable alternative to gasoline). 2 Reduced maturation time for crops increases annual yield and permits more frequent harvests. Ideal for feeding a growing population or meeting increased consumer demand for a product. 3 Ability of crops to grow in adverse conditions for example, the ability to grow in a hot climate with limited water and mineral availability. It might be possible to grow GM plants that are able to remove pollutants (e.g. heavy metals), from barren soil eciently, allowing it to be farmed again. 4 Improved crop resistance to disease, drought, pests and herbicides inserted genes could confer these benecial characteristics on crops to prevent damage from microbial infection or attack by damaging pests such as beetles and locusts. 5 Enhanced taste, texture, quality and shelf life improves upon currently available foods and makes the GM products more desirable and saleable. 6 Production of healthy crops which can produce higher levels of useful unsaturated fatty acids and fewer saturated ones. It may also be possible to modify crops so that they contain medicinal compounds such as antioxidants or anticancer compounds. 7 Improved productivity and feed eciency in GM animals means that livestock would require less food per kilogram gain in body mass. 8 Improved animal health GM animals could also be developed to be more resistant to disease. 9 Enhanced yield of dairy products such as milk and eggs. 10 Replacement of chemical insecticides and herbicides with environmentally friendly bioherbicides and bioinsecticides to eradicate damaging weeds and pests.
22 F FOOD CHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
11 Improved conservation of water, soil and energy GM crops can be engineered to require less space, less water and less management. Better natural waste management is an additional benet.
F6 Texture
The texture of foods can be described using many dierent adjectives including soft, gummy, crispy, viscous and rough. Many individual foods have the same textural qualities throughout there is no change of texture within the food. This uniformity is described as homogeneity. Many foods appear homogeneous although they actually contain components that are immiscible with each other. This is because they contain very small particles (too small to be seen with the naked eye) of one phase dispersed in another. Imagine smoke rising from a re the smoke appears as a uniform and continuous grey blanket, when it is actually billions of microscopic solid particles oating in air. The two phases (solid smoke particles and gaseous air) are immiscible they remain separate and discrete and yet the overall impression is one of homogeneity (though the solid particles could be seen easily under a microscope). This type of system is called a dispersed system or a colloid. Phases are dierent substances separated by a boundary (e.g. in mayonnaise the oil and vinegar are dierent phases). The particles which are nely dispersed make up the dispersed phase. The phase they are dispersed in is called the continuous phase.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
Learning objectives
Understand what is meant by a dispersed system and their relationship to the texture of food Distinguish between emulsions, suspensions and foams in food Describe the action of emulsiers
A dispersed system can be de ned as a kinetically stable mixture of one phase (dispersed phase) within another, largely immiscible, phase (continuous phase).
F FOOD CHEMISTRY
23
There are various dispersed systems possible (many are found in foods) depending on the phases involved. In most foods the continuous phase is a liquid and the state of the dispersed phase varies. Examples are shown in Table F7.
Type of dispersed system Continuous phase sol (can also be called a suspension) emulsion foam gel solid foam
Table F7 Dispersed systems.
Example melted chocolate (continuous phase molten cocoa butter, dispersed phase cocoa solids), many natural food colourings mayonnaise (continuous phase oil, dispersed phase vinegar), cream, salad dressing whipped cream (continuous phase liquid cream, dispersed phase air), beer froth, raw meringue jelly cooked meringue, souf
liquid
The colloidal particles of the dispersed phase scatter light so you cannot see through a colloid. Compare a cup of black coee (solution see-through) to a cup of white coee (dispersed system not see-through).
Emulsiers
Emulsiers are substances that increase the kinetic stability of a dispersed system. They aid the formation of emulsions or foams. Emulsiers act as an interface between the liquid continuous phase and the solid or gas dispersed phase holding them together. Generally, emulsi ers have both hydrophilic (water-liking) and lipophilic (fat-liking) properties and can therefore dissolve in both the continuous and dispersed phases helping bind them together. Emulsiers are added to emulsions and foams to prevent the individual phases from separating from one another and to maintain homogeneity. Surface tension causes liquids to try to have minimum surface area. When two droplets collide and combine to form a single, larger droplet the surface area is less, therefore it is favourable for the colloid to separate out. Emulsiers lower the surface tension between two liquids and stabilise the emulsion. Typical emulsiers used in food production include mustard and egg yolk. Mustard contains mucilage which consists of long-chain polysaccharides and polypeptides. This allows it to bind to both oil and water and to prevent the small droplets of each from separating. This is useful for making vinaigrettes. Egg yolk contains a substance called lecithin. Lecithin is used in chocolate bars to help the cocoa solids and butter mix and in mayonnaise to help the oil and vinegar form an emulsion. Lecithin contains phospholipid and glycolipid molecules. These have fatty acid chains which will dissolve in the oily phase of the emulsion (lipophilic) and polar phosphate/sugar heads which will dissolve in the aqueous phase (hydrophilic), thus keeping the two phases bonded together (Figure F24). To make an emulsion, an oil, water and an emulsier need to be beaten, mixed or whisked together using mechanical energy. This breaks the intermolecular forces between the molecules in each of the phases and causes them to form minute droplets that take some time to coalesce back into large globules; the rate of coalescence is signicantly reduced
24
F FOOD CHEMISTRY
hydrophilic head
lipophilic tail
OIL
emulsifier
water molecules
in the presence of stabilisers, such as pectin or agar, and emulsiers. While emulsiers help the two phases of a dispersed system to form an emulsion, a stabiliser works to prevent the phases from separating.
Test yourself
8 For each of the following dispersed systems (colloids) give the state of the continuous phase and dispersed phase: emulsion foam 9 State what types of dispersed system (colloid) are present in each of the following foods: mayonnaise froth on cappuccino beaten egg white hot chocolate
HL
Learning objectives
Describe the free radical mechanism of oxidative rancidity in fatty acids Understand the role of lipid peroxides as key intermediates during rancidication
Initiation
In the rst step, a CH bond undergoes homolytic ssion to produce two free radicals. RH R + H The homolytic ssion of the CH bond requires a signicant amount of energy input due to the strength of the CH bond (412 kJ mol1).
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
RH represents any unsaturated fatty acid with hydrogen atoms that can be lost to form free radicals (e.g. linoleic acid).
F FOOD CHEMISTRY
25
Extension
The exact mechanism of initiation in auto-oxidation is poorly understood, it is believed that the removal of a hydrogen atom from the fatty acid chain actually requires an initiator molecule which may be oxygen itself or a free radical present in the substance. In + RH InH + R
HL
Propagation
The alkyl radical (R) produced in the initiation step now reacts with oxygen to form a peroxyl radical (ROO). This peroxyl radical is able to remove a hydrogen from an intact fatty acid molecule to form a hydroperoxide and regenerate the alkyl radical, which can subsequently react with oxygen and continue the chain reaction. R + O2 ROO ROO + RH ROOH + R This mechanism shows how a large number of hydroperoxide molecules can be formed from a small number of free radicals.
Termination
In the termination steps, two free radicals combine to form a non-radical species. This stage produces a mixture of compounds. R + R RR ROO + R ROOR Splitting of the OO bond requires less energy input than the initial CH homolysis due to a signicantly lower bond enthalpy (OO 146 kJ mol1). ROO + ROO ROOR + O2
Examiners tip Remember, the partial hydrogenation of unsaturated fats uses metals such as nickel as catalysts, so there are trace amounts of these metals in products such as margarine. Iron is a commonly occurring transition metal in many foods and also promotes rancidication.
H R1 H O H R1 C O C O UV R2
ultraviolet radiation
H R1 C O R2 + OH
ketone
R2 + R
R1
C O H
R2 + RH
Examiners tip The equations for the decomposition reactions of lipid hydroperoxides are not required for the exam, but an understanding that decomposition occurs to yield ketones, aldehydes and other products, as well as additional free radicals, is expected.
R1
+ R2
aldehyde O
Figure F25 The formation of volatile molecules from the decomposition of a lipid peroxide.
Test yourself
10 Draw out a reaction sequence to show how pentan-3-one could be formed from a suitable organic hydroperoxide.
26
F FOOD CHEMISTRY
F8 Antioxidants
There are three main types of antioxidants: free-radical scavengers (freeradical quenchers), chelating agents and reducing agents.
HL
Learning objectives
Describe the mechanism of action of free radical scavengers Understand the role of chelating agents as antioxidants Explain the function of reducing agents as antioxidants
F FOOD CHEMISTRY
27
HL During termination:
R + A RA RO + A ROA ROO + A ROOA HO + A AOH The antioxidants mentioned here (BHA, BHT, TBHQ and tocopherols) all contain a phenolic ring structure which is excellent at sequestering free radicals. The hydrogen on the phenolic OH group is easily removed.
Chelating agents
The decomposition of organic hydroperoxides may occur in the presence of metal ions and so removing these ions from solution acts to reduce the rate of hydroperoxide decomposition and rancidication of fats. One method of removing active metal ions from solution is to use a chelating agent (from the Greek meaning claw) which essentially wraps the metal ion up inside a molecular cage, like clutching a coin in a closed st. This prevents the metal ion from coming into contact with other species such as organic hydroperoxides and thereby prevents the auto-oxidation reaction. One well-known and commonly used synthetic chelating agent is ethylenediaminetetraacetic acid or EDTA for short (Figure F27). EDTA is called a hexadentate ligand, literally meaning six teeth.
O HO C CH2 N CH2 HO O O O O O O C O O C C N H2 H2 O C CH2 CH2 C OH OH
N N
M3+
O O
Figure F28 The [EDTA]4 ion bound to a central metal ion in an octahedral coordination complex.
Natural chelating agents are found in many plant extracts such as rosemary, tea and ground mustard.
The four acidic protons on EDTA partially dissociate in aqueous solution to produce an ion with a 4 charge, [EDTA]4, with available lone pairs of electrons on the four O atoms and the two nitrogens. These six atoms are able to form an octahedral coordination complex with a central metal ion (Figure F28). In doing so, the metal ion is almost entirely enclosed in the structure of the [EDTA]4 ion. In many food and cosmetics products, EDTA is added as di- or tetrasodium EDTA in which the [EDTA]2/4 ion is already present. By preventing metal-catalysed oxidation, [EDTA]4 is eective at: reducing non-enzymatic browning of potato products, sh and shellsh; preventing avour changes in milk due to oxidative rancidication; preventing oxidation of meat products; and preventing discoloration of canned fruits and vegetables by chelating Al3+ and Fe3+ ions.
28
F FOOD CHEMISTRY
Reducing agents
Antioxidants falling into this class include the carotenoids and ascorbic acid (vitamin C). They work by acting as electron and hydrogen donors which causes molecular oxygen to be reduced and hence removed (or at least lowered in concentration) from the environment. Ascorbic acid reduces oxygen to water and, in the process, is converted to the oxidised form, dehydroascorbic acid (Figure F29).
HL
a HO HO H HO OH O
b HO HO H O O O
F9 Stereochemistry in food
Naming enantiomeric stereoisomers
Several dierent systems are employed for naming the enantiomers present in food.
Figure F29 (a) The reduced form of ascorbic acid; (b) the oxidised form of ascorbic acid, dehydroascorbic acid.
Learning objectives
Apply the D/L, R/S and (+)/() systems for naming enantiomers Discuss the dierent occurrence of enantiomers in food Distinguish the properties of dierent enantiomers found in food
b CHO HO C H CH2OH
L-glyceraldehyde
CHO C H H
CHO C OH CH2OH
L-glyceraldehyde
Examiners tip Remind yourself about enantiomers by looking at Chapter 10, page 495 in the Coursebook.
HO HOH2C
D-glyceraldehyde
Figure F30 The reference compound glyceraldehyde in (a) Fischer projection and (b) tetrahedral projection.
When applying the D and L system, it is the chiral carbon furthest away from the carbonyl group that is important. When shown in the Fischer projection (see page 2), if the OH group on this important carbon is on the right, the molecule is given the D notation; if the OH group is on the left, it is given the L notation. Looking at two forms of glucose in the Fischer projection, we can compare them to glyceraldehyde to determine which is the D enantiomer and which is the L form (Figure F31). If the molecule is not shown in Fischer projection it must be considered whether the molecule could be converted by a series of chemical reactions into D- or L-glyceraldehyde. If it could be converted into D-glyceraldehyde then it is assigned the label D.
Amino acids When applying the D and L system to amino acids, the CORN rule is used. This rule looks at the positions of the COOH, R and NH2 groups around the chiral carbon.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 F FOOD CHEMISTRY 29
HL
CHO
CHO HO H HO HO
H HO H H
OH H OH OH
CH2OH
D-glucose
H OH H H
CH2OH
L-glucose
CHO H C OH CH2OH
D-glyceraldehyde
CHO HO C H CH2OH
L-glyceraldehyde
Figure F31 Fischer projections of the two stereoisomers of glucose and their relationship to glyceraldehyde.
The molecule is drawn in a classic tetrahedral projection with the chiral carbon at the centre and the single hydrogen atom pointing away from the viewer. If looking from the COOH to R to NH2 you go in a clockwise direction, the structure is the D form; if you must go anticlockwise it is the L form (Figure F32).
anticlockwise therefore L
R
C
clockwise therefore D
CH3
CH3
N H2N
H
L-alanine
COOH HOOC
mirror plane
CO
H
D-alanine
NH2
anticlockwise, therefore S 2
Br
C
clockwise, therefore R 2
HL
Br
C
CI
F4
F4
CI
mirror plane
Consider the enantiomer of lactic acid (2-hydroxypropanoic acid) shown in Figure F34. The OH group has the highest priority as O has a higher atomic number than C and H. The COOH group is assigned a higher priority than CH3 as, when two atoms attached to the central C have the same atomic number, we must look at the atoms joined to those atoms. In the COOH group the C has an O attached (higher atomic number), whereas the CH3 only has Hs (lower atomic number) attached.
Priority of other groups With larger groups which have the same atom attached to the central C, we keep going along the chain until there is a dierence between the groups. Thus CH2CH3 has a higher priority than CH3, and in the groups shown here the group on the left has higher priority as the C with O (higher atomic number) is closer to the chiral centre.
H H C H H C H HO C H H H C OH
COOH H HO
1 4
C
3
clockwise, therefore R
CH3
>
H C H H C H
Double bonded atoms count as two groups attached to an atom, thus CHO has higher priority than CH2OH as it is counted as if there are two O atoms attached to the C.
O C OH
>
O C
>
HO C H
decreasing priority
Examiners tip Do not confuse the (d) and (l) system with D and L system as they are based on dierent things. The three systems do not always match up with each other; for example, D-glyceraldehyde is the (+) form, but D-alanine is the () form.
F FOOD CHEMISTRY
31
HL
Stereoisomers in food
Knowing about the enantiomeric forms of certain compounds present in the food we eat is extremely important because dierent optical isomers can possess dierent tastes, odours and toxicities. A classic example of varying toxicity shown by enantiomeric forms of the same compound is the dierence in eect between the R and S isomers of the drug thalidomide. The R form is highly eective in treating morning sickness, while the S form is implicated in causing severe birth defects. Unfortunately, thousands of pregnant women were dosed with a mixture of both enantiomers (racemate) and many of them gave birth to children with limb abnormalities. In food science, being able to distinguish between two enantiomeric forms of a compound based on smell and taste can be very useful in determining the authenticity of the ingredients and the level of processing to which the food has been subjected. For example, S(+)-carvone tastes of caraways seeds and dill, while the R()-carvone enantiomer tastes of spearmint (Figure F35). Most naturally occurring amino acids are in the L form, which means they have little-to-no taste; the D forms of amino acids taste sweet. Conversely, most naturally occurring carbohydrates are of the D form and taste sweet. This is due to the way in which the enantiomers interact with taste receptors. Other examples of taste being aected by the enantiomeric form of a molecule present include: 1 R(+)-limonene, which smells of oranges. S()-limonene, which is described as having a piney or turpentine-like odour (Figure F36). Examiners tip The IB syllabus describes the fragrance of S()-limonene as that of lemons, but there is signicant evidence in available published literature to support the belief that it does, in fact, smell of pine.
R() H H
S(+)
Figure F35 The R() and S(+) enantiomers of the fragrant molecule carvone.
The dierence in smell arises because of the way that protein receptors (olfactory receptors) in our nose detect the molecules.
R(+)-limonene
S()-limonene
Synthetic raspberry avourings contain a mixture of both enantiomers which is why they never taste quite like the real thing!
O
2 R(+)-alpha-ionone gives raspberries their natural avour. S()-alpha-ionone has less raspberry avour, but cedar wood overtones. See Figure F37. Many other synthetic food avourings contain a racemic mixture of both enantiomers, where only one enantiomer provides the natural avour. Measuring optical activity could, therefore, allow us to distinguish between natural food components and components that have been produced synthetically.
32
F FOOD CHEMISTRY
Test yourself
11 Draw the structure of the 2-amino acid that does not show optical activity. 12 Classify each of the following amino acids as D or L.
a b c
HL
CH2C6H5 C COOH
H2N
CH3 H H2N C CI H HO
OH C CH2CH3
Learning objectives
+ O C6 C3 C6 Figure F38 The avylium ion core structure found in anthocyanin pigments.
Describe the similarities and dierences in the structures of natural pigments, including anthocyanins, carotenoids, chlorophyll and heme Explain why natural pigments are coloured Deduce the solubility rules for carotenoids and anthocyanins
Individual anthocyanins dier in: the number of hydroxyl (OH) and methoxy (OCH3) side groups present on the rings the identity, number and position of attached sugar moieties the types and number of aliphatic or aromatic acids attached to the sugars. Some examples are shown in Figure F39.
Carotenoids
Most carotenoids are derived from a 40-carbon polyene (multiple C=C double bonds) chain. The ends of the chain may terminate in a cyclic (ring) group which may or may not have oxygen-containing functional groups attached. Some examples are shown in Figure F40.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
Examiners tip The molecule quercetin is not technically an anthocyanin despite being included on the IB syllabus as an example. It does not contain the positively charged avylium ion core, nor does it have sugar groups attached. Quercetin is a avonol.
F FOOD CHEMISTRY
33
OH OH HO O OH OH
c
OCH3 OH HO
+ O
OCH3 O HO HO
sugar
OH OH
O OH OH
+ O
OH
CH3 O OH OH
HO
OH
OH
O HO HO
O OH
OH HO O+ O O O CH3 O O O OH O HO O OH OH O OH HO
OH OH O OH
HO HO OH
O OH O
HO OH HO OH O OH
O HO O O HO O OH OH O OH
HL Figure F39 (a) Quercetin (no sugars); (b) oenin (one sugar); (c) antirrhinin (two
sugars); (d) Heavenly Blue anthocyanin (from Ipomoea tricolor Mexican Morning Glory) which contains caffeic acid groups (in blue) between the sugar molecules.
Those carotenoids that contain solely carbon and hydrogen are called carotenes, while those containing oxygen atoms are called xanthophylls.
34
F FOOD CHEMISTRY
OH
d H
OH
HO Figure F40 (a) Lycopene (C40H56) no cyclic groups; (b) -carotene (C40H56) cyclic groups; (c) retinol/vitamin A (C20H30O) half a carotene unit with cyclic groups; (d) lutein (C40H56O2) xanthophyll with oxygen-containing groups.
HL
Heterocyclic refers to the presence of a ring structure (cyclic) containing carbon and at least one other element (hetero), typically sulfur or nitrogen in chlorophyll.
Myoglobin exists as a monomer, whereas haemoglobin exists as a tetramer comprising four globin molecules and four heme units.
a 3 4
R=CH3 CH3
chlorophyll a
R=CHO H O
chlorophyll b
N
2 5
N N Mg O
6
2+
N N
N Mg2+ N O O N
NH
1
HN
N O O O
O O O H
C20H39
Figure F41 (a) The ring structure of a porphin unit. In both (b) chlorophyll a and (c) chlorophyll b, a C=C is missing so that the carbon atoms at positions 7 and 8 are sp3 hybridised and tetrahedral, where previously all carbons in the porphyrin unit were planar and sp2 hybridised. At position 3, the substituent R group is a methyl (CH3) in chlorophyll a and an aldehyde (CHO) in chlorophyll b.
Examiners tip Conjugation and chromophores are discussed in detail in Option A, pages 38 and 4041 on the CD-ROM.
HL
The part of a molecule that absorbs light and is therefore responsible for the property of colour is called a chromophore. In the classes of molecule here, the chromophore is a conjugated system alternating single and double bonds that absorbs energy from photons to promote electrons from a lower energy level to a higher one. Given that the energy required to do so is quantised (i.e. takes discrete values), only certain parts of the spectrum are absorbed depending on the molecule. The longer the conjugated (delocalised) system of alternating single and double bonds, the longer the wavelength of light absorbed (Figure F42). As the size and arrangement of the -bonds are dierent in the various anthocyanins, carotenoids, chlorophyll and heme they all absorb light in slightly dierent parts of the visible spectrum and so have dierent colours. An organic molecule will absorb visible light and appear coloured if the conjugated system is su ciently long (usually more than eight conjugated double bonds). A benzene ring counts as three conjugated bonds.
36
F FOOD CHEMISTRY
H C H
H C C H
H C C H
H C
H C H CH3
H C H
H C
H C H
H C C H
H C H C H
H C H
Figure 42 (a) Octa-1,3,5-triene has a conjugated system of three double bonds; (b) octa-1,4,7-triene the double bonds are not conjugated and this will absorb a shorter wavelength of light than octa-1,3,5-triene.
Solubility
Anthocyanins are water-soluble because they contain numerous hydroxyl (OH) groups which can hydrogen bond with water molecules. Many of them possess an overall positive charge in the avylium ring structure permitting electrostatic forces to form between the molecule and water. Anthocyanins are not fat-soluble due to the extensive hydrogen bonding between molecules due to the OH groups. Carotenoids are not water soluble because most of the molecule consists of a non-polar hydrocarbon chain. The primary type of intermolecular force is van der Waals forces as most of the molecule is non-polar. They contain no/few OH groups so cannot form any/many hydrogen bonds to water molecules. Carotenoids are fat soluble. The forces between fat molecules are mainly van der Waals forces. Carotenoids are able to form signicant van der Waals forces with fatty acids, hydrocarbons and other non-polar molecules.
HL
Test yourself
14 Explain which of the molecules shown here will absorb longer wavelength electromagnetic radiation.
a H3C CH3 CH3 CH3
15 Would you expect the molecules shown in Question 14 to be water soluble or fat soluble?
O
H3C
CH3 O
CH3
H3C
CH3
F FOOD CHEMISTRY
37
Exam-style questions
1 The study of the chemistry of food is an essential part of ensuring food quality and providing consumers with better avours, smells, textures and appealing colours in the foods they buy. a Describe what is meant by a food. The composition of foods can be broken down into a number of discrete nutrient groups each with a dierent chemistry and all need to be represented in a balanced diet. b Give details on the structure and chemical composition of: i a named amino acid ii a named monosaccharide c In which nutrient groups could the following features be found: i a peptide bond ii a glycosidic bond iii an ester linkage 2 Oleic acid is a mono-unsaturated fatty acid, eicosapentaenoic acid is a poly-unsaturated fatty acid containing ve C=C double bonds. Olive oil has a melting point around 0 C while that of sh oil is < 5 C. a State and explain, in terms of structure and bonding, which fatty acid is most likely to be present in each of the oils. Vaccenic acid, C18H34O2, is a naturally occurring mono-unsaturated fatty acid found in dairy products. It exists as both trans and cis stereoisomers. b i State and explain, in terms of structure and bonding, the relative melting points of the two isomers. One of the stereoisomers of vaccenic acid is believed to be more harmful to human health than the other. ii State which isomer is more harmful and give two possible reasons for your choice. Lipids are prone to rancidication, during which they react with oxygen to form a number of unpleasant smelling and tasting breakdown products. c i Place the following fatty acids in order (fastest rst) of the rate at which they undergo auto-oxidation: stearic acid oleic acid linoleic acid [1] ii Give one reason for your choice. [1] [3] [3] [4] [3] [3] [1] [1] [1] [2]
Margarine and butter are two similar products used in cooking that dier chemically. Butter tends to be produced from saturated animal fats while margarine is manufactured from unsaturated vegetable oils. d Suggest two reasons why it is benecial to partially hydrogenate the unsaturated fatty acids during the production of margarine. [2]
3 We are all familiar with the best before dates seen on food products at the supermarket. This date is an indication of the shelf life of the product. Shelf life is an important concept in the selling and marketing of foods. a State two properties of a food that might be adversely aected when it exceeds its shelf life. b Quantitatively describe the eects of three named factors on the shelf life of a food. For one of these factors, explain the eect described. Fatty foods have a shelf life generally determined by the rate at which the lipids decompose to form o-smelling byproducts. This process is called rancidication and is a form of oxidation. c i By what sort of mechanism do fats undergo rancidication? ii Name a functional group present in the products of rancidication. [1] [1] [2] [4]
38
F FOOD CHEMISTRY
The shelf life of products can be increased by a number of methods. There is a signicant amount of chemistry behind these processes. d i Explain how lm packaging helps to increase the shelf life of food. The rate at which food becomes unsafe to eat can be reduced by combining foods with additives such as antioxidants. There are a number of naturally occurring antioxidants but, increasingly, synthetic antioxidants are added to perishable items to extend their shelf life. ii For a named synthetic antioxidant, explain how its chemical structure gives it antioxidant properties. [2] iii State and explain two ways in which traditional preservation techniques increase the shelf life of food. [4] 4 Coloration in foods is due to the presence of naturally occurring pigments within the substance. One function of colour in foods is to make them more appealing to consumers, including animals in the natural world. a b i Explain why pigments and dyes are coloured. ii Name two naturally occurring pigments and give one source for each. i Name one factor that aects the colour of a pigment. ii Describe and explain the eect of varying this factor on the colour of an anthocyanin. [2] [4] [1] [3] [2] [3]
To make bland foods appear more nutritious and tasty, synthetic colourants are added by manufacturers. c Suggest two problems associated with the worldwide use of synthetic food colourants. The Maillard reaction and caramelisation are two mechanisms by which foods develop avours and a brown coloration. d i Describe the main ways in which these two processes are dierent. ii Name one food in which the Maillard reaction predominates and one in which caramelisation is the predominant process of browning. iii How might the rate of the Maillard reaction be increased? [3] [2] [1]
5 In a world with a rapidly increasingly population, food and fuel production struggle to keep up. There is a very real danger that many countries will simply become unable to feed their people. Genetic modication of plants and animals is one possible partial solution to this potential disaster. a Describe the principles behind genetic modication of an organism. b Give two arguments for and two arguments against the global use of genetically modied organisms in the food industry. 6 Besides avour, odour and colour, the texture of a food is an extremely important factor to humans in determining the likeability of a product. The texture of a food depends to a large extent on the phases of matter that exist within a food. a Explain what is meant by a dispersed system. b For each of the following foods, state which type of dispersed system is present: i melted chocolate ii whipped cream iii jelly iv Name a further type of dispersed system found in foods not included in parts iiii and describe the phases present. The texture and appearance of some foods can be manipulated by the addition of substances with special properties. A separated mixture of oil and vinegar would be unpalatable to most, but shake it with an emulsifying agent to prevent the separation process and a vinaigrette is produced. c Explain how structure and bonding make lecithin useful as an emulsier.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
[2] [4]
[4]
F FOOD CHEMISTRY 39
7 During rancidication of fat-containing foods, fatty acids molecules undergo oxidation. The key intermediate in the auto-oxidation of fatty acids is an organic hydroperoxide. a i Draw the structure of a hydroperoxide, use R to represent the side group. ii Why are hydroperoxide molecules prone to photolysis? [1] [2] [5] [1] [1] [2]
b Describe, using equations, the process of fatty acid auto-oxidation. Include the correct terminology for each step. c Write equations for the decomposition of an organic hydroperoxyl radical into: i an aldehyde ii a ketone d Suggest two reasons why margarine might undergo rancidication more rapidly than butter. 8 Antioxidants, synthetic and natural, are important in maintaining the chemical environment in which other molecules exist. They are able to slow down the natural process of oxidation, during which foods undergo changes in texture, avour, odour and colour. a Explain, including appropriate equations, how some antioxidants are able to prevent the auto-oxidation of fatty acids. To be an eective antioxidant, ethylenediaminetetraacetic acid (EDTA) needs to exist as a hexadentate ligand. b i State what is meant by a hexadentate ligand and the shape of the EDTAmetal ion coordination complex. ii By considering the answer to part i, why might EDTA be expected to lose antioxidant potency in solutions with a very low pH? iii Why is the EDTA useful in preventing the discoloration of canned fruit, such as peaches?
[4]
c Many fruits go brown when their esh is exposed to air or when they are chopped and stored in water. This process occurs as the colourless molecule catechol (1,2-dihydroxybenzene) is converted to 1,2-benzoquinone which is red.
OH OH O O
catechol
1,2-benzoquinone
i What name is given to the type of reaction which converts catechol to 1,2-benzoquinone? ii Suggest a chemical species which might bring about this conversion when fruit is either exposed to air or stored in water. iii Why does adding lemon juice to the water used to store cut fruit reduce the rate at which it goes brown? 9 Compounds with identical chemical formulae may exist in various dierent forms, or isomers. One type of isomerism is called stereoisomerism. There are several dierent naming conventions for distinguishing the enantiomers of a molecule. a Name the compound used as the basis for the D and L system for naming stereoisomers. The D and L system for naming enantiomers of amino acids can be applied by using the CORN rule.
[1]
b Explain how the CORN rule can be used to determine whether an amino acid is the D or L stereoisomer. [4]
40
F FOOD CHEMISTRY
c Determine whether the following compounds are D or L enantiomers: i alanine ii galactose iii fructose
CHO H H H2N O alanine CH3 OH HO HO H C C C C OH H H OH HO H H CH2OH C O H OH OH
[3]
CH2OH galactose
CH2OH fructose
d Describe the taste of each of the specic compounds shown in part c. e Use the R and S system to determine which enantiomer of the amino acid alanine is shown in part ci. f Explain why it is possible to have pairs of enantiomers designated as S() and R(+) as well as S(+) and R(). g Suggest one property shared by both (+) and () enantiomers of a compound, and one property that might dier. Menthol exists as a pair of enantiomers. Most naturally occurring menthol is ()-menthol.
h Suggest why manufacturers of menthol have spent signicant time and money in developing a synthetic route that yields the () enantiomer and not a mixture of the () and (+) enantiomers. [2] 10 The absorption spectra of the anthocyanins oenin and antirrhinin are very similar, with an absorption maximum of around 520 nm. They appear close in colour to the naked eye but, under close inspection, there is a small variation of a few nanometres in their absorption maxima. a By comparing the structures of oenin and antirrhinin, suggest one reason they appear the same colour, and two reasons for the small dierence in the wavelength of the maximal absorption. Another type of naturally occurring pigment is the carotenoid family, members of which are found in carrots, tomatoes and the shell of some shellsh. b Identify the subcategory of carotenoid to which each of the following molecules belongs: i [1] [3]
ii
O O HO
OH
[1]
[1]
F FOOD CHEMISTRY
41
The structure and bonding present in a molecule is an important factor in determining whether a molecule will be coloured or not. c i Describe and explain what would be expected to happen to the position of the absorption peak for lycopene located in the visible region of the light spectrum, when bromine water is added to a solution of lycopene in hexane. ii In terms of structure and bonding, explain why the solvent used in part ci is hexane rather than water. iii State and explain whether the naturally occurring molecule betanin could be used as a food colouring.
O HO H N O OH
O N HO O
+
HO HO
OH OH betanin
42
F FOOD CHEMISTRY