You are on page 1of 10

SURFACE PRODUCTION OPERATION & EQUIPMENT

IN HOUSE TRAINING PROPOSAL

Office : Bener Tr IV / 39 RT 03 RW 10, Yogyakarta 55243 Phone : (0274) 5305512, Mobile : 0812 2792 6688, email : mitraglobaltc@gmail.com Blog :mgtc-jogja.blogspot.com Web: mitraglobaltrainingcenter.weebly.com.

MITRA GLOBAL TRAINING CENTER

SURFACE PRODUCTION OPERATION & EQUIPMENT


CONTENT COURSE:
OBJECTIVE COURSE COURSE CONTENT FACILITIES INSTRUCTOR AND CV RUNNING COST TRAINING ACCOMODATION REGISTRATION & PAYMENT SCHEDULE IN HOUSE TRAINING CLOSSING

SURFACE PRODUCTION OPERATION & EQUIPMENT


After completion of this course, the participants will be able and capable to : technology in field application. with current handling processes. handling processes.

OBJECTIVE COURSE

1. Understand the basic concept of oil and gas handling processes and facilities, and how to operate this

2. Diagnostic of oil and gas reservoir performance under actual drive mecanism and future performance 3. Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity. 4. Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas

COURSE CONTENT

1. Gas Surface Production Operation and Equipments b. Gas Properties


a. Introduction to Gas Handling and Facilities Ideal gas Real Gas Gas Formation Volume Factor Gas Compressibility Gas-Water System Gas Reserves Reservoir Gas Flow Tight Gas Well Gas Well Testing Gas-Condensate System Well Completion Effect

c. Gas Reservioir Performance


d. Gas Piping System


Basic Flow Equation Effect of Liquids

Flow in Wells and Flow in Pipelines Use of Pressure Traverse Curve Liquid Removal from Gas Wells Type of Compressors Compressor Design Centrifugal Compressor Compressor Selection Orifice Metering

e. Gas Compression

f. Total System Analysis


g. Flow Measuring

Tubing and Flow Line Effect Separator Pressure Effect Metering System Design

h. Gas Condensate Reservoir


i. Field Operation Problems


Well Testing and Sampling Gas Cycling Hydrate Formation Sulfur Deposition

Other Metering Methods

Pressure Cumulative Production Plot Sour Gas Production Corrosion Control With Inhibitors Field treatment of Natural Gas Gas Plant Operation Gas Dehydration Gas Sweetening

j. Gas Processing

2. Oil Surface Production Operation and Equipments

a. Oil Well Surface Production Equipment and Operation

b. Oil Gathering System. Manifold and Flowline


Oil Well Equipment

Oil Well Production Operation Well Automatic Safety Device Oil Gath ring System Manifold e System Flowline Sizing and Design

c. Crude Oil and Gas Separation


d. Principles of Measurement

Separator and Principle of Separation Design of Separator Oil Dehydration Introduction to Measurement Crude Oil Measurement Gas Measurement Introduction Responsibility for Test Preparation for Test Types of Well Test Type of Test Gas Lift Problem in Testing Submersible Pump Succker Rod Pump Hydraulic Pump

e. Well Test

Equipment and Procedures

f. Artificial Lift Method


Accuracy of Fluid Measurement

3. Cases study and discussion

FACILITIES
1. Training Kit 2. Matery Bag training, jacket training, Flash Disk 4 GB, Block Note, pencil case (include stasionery), Souvenir Handout Hardcopy and Soft Copy Training material

3. Sertificate Participants training

INSTRUCTOR & CV

Dr.Ir. Sudjati Rachmat, DEA. is a lecturer in the department of petroleum in Bandung University since 1979 until now. Mr. Sudjati is an alumnus of the ITB graduating in 1977, then continued his education at diplome courses Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Indonesia, such as Pertamina, Chevron, Rhino LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and

Dr.Ir. Sudjati Rachmat, DEA

d'Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. And in the years 1985 - 1987 he took Dr. Sudjati Rachmat often become instructors in many petroleum-related training to companies throughout Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Gas , PPTM Gas, PT Caltex Pacific Indonesia, Gulf, Arco, etc.. Training topics that he convey them is production surface and down hole equipment, Basic Reservoir fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information Systems, field of Oil and Gas and has published and took seminar in the world forum.

Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover , Numerical and Statistical Methods for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and

Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology,

Transportation of Oil and Gas, Sand Control Technology, and others. Mr. Sudjati did a lot of research in the

Date Duration Venue

: 13-16 May 2013 or TENTATIVE : 08.00 am 04.00 pm, 4 days : Company

RUNNING

Cost Training(can negotiable) Rp.6.889.000 /person ( 10 person) Rp.6.589.000/person (15 orang) : participant, instructor and provider MGTC by Company : Instructor & 1 person (provider MGTC) by Company : Instructor & 1 person (provider MGTC ) by Company ACCOMODATION

Coffee break and Lunch Hotel to stay Transportation (airline ticket)

a. Registration confirmed by phone or email b. Payment: Cash on the first days training. Invoice Transfer c. For further information, please contact: Mitra Global Training Center

REGISTRATION & PAYMENT

Diana
Phone E-mail web Blog

0812 2792 6688

: (0274) 530 5512 : mitraglobaltc@gmail.com : http://mitraglobaltrainingcenter.weebly.com : http://mgtc-jogja.blogspot.com

Training Instructor

Duration

: Surface Production Operation & Equipment : Dr. Ir. Sudjati Rachmat, DEA

IN HOUSE TRAINING SCHEDULE


Date Venue

Monday,

Tuesday,

: 13-16 May 2013 or Tentative : Company

Wednesday,

Thursday,

Conductor
organizer

08.00-08.15 (H1) 08.15-10.00 (H2-H4) 08.00-09.30 10.00-10.30 10.30-12.00

Opening

1. Gas Surface Production Operation and Equipments a. Introduction to Gas Handling and Facilities b. Gas Properties Ideal gas Real Gas Gas Formation Volume Factor Gas Compressibility Gas-Water System Gas-Condensate System

f. Total System Analysis Tubing and Flow Line Effect Separator Pressure Effect Compressor Selection g. Flow Measuring Orifice Metering Metering System Design Other Metering Methods h. Gas Condensate Reservoir Well Testing and Sampling Gas Cycling

j. Gas Processing Field treatment of Natural Gas Gas Plant Operation Gas Dehydration Gas Sweetening 2. Oil Surface Production Operation and Equipments a. Oil Well Surface Production Equipment and Operation Oil Well Equipment Oil Well Production Operation

d. Principles of Measurement Introduction to Measurement Crude Oil Measurement Gas Measurement e. Well Test Introduction Responsibility for Test Preparation for Test Types of Well Test Equipment and Procedures

Instructor

c. Gas Reservioir Performance Reservoir Gas Flow Gas Reserves Well Completion Effect Tight Gas Well Gas Well Testing

Coffee Break

organizer

Instructor

12.00-13.00 13.00-14.30 14.30-15.00 15.00-16.00

d. Gas Piping System Basic Flow Equation Flow in Wells and Flow in Pipelines Effect of Liquids Use of Pressure Traverse Curve Liquid Removal from Gas Wells e. Gas Compression Type of Compressors Compressor Design Centrifugal Compressor

i. Field Operation Problems Pressure Cumulative Production Plot Hydrate Formation Sour Gas Production Corrosion Control With Inhibitors Sulfur Deposition
Case study and Discussion

Well Automatic Safety Device

Lunch

b. Oil Gathering System. Manifold and Flowline Oil Gath ring System Manifold e System Flowline Sizing and Design

Accuracy of Fluid Measurement Problem in Testing Type of Test

Coffee Break

c. Crude Oil and Gas Separation Separator and Principle of Separation Design of Separator Oil Dehydration

f. Artificial Lift Method Gas Lift Submersible Pump Succker Rod Pump Hydraulic Pump

organizer Instructor organizer

Case study and Discussion

Instructor & organizer

Thats our proposal we are offering. We hope you consider it and enrollment participants to join this training. Thanks for your attention. We wait your company soon.

CLOSING

Sincerely yours, Mitra Global Training Center

Diana- NAF
Phone E-mail web Blog

0812 2792 6688

: (0274) 530 5512 : mitraglobaltc@gmail.com : http://mitraglobaltrainingcenter.weebly.com : http://mgtc-jogja.blogspot.com

You might also like