Professional Documents
Culture Documents
Multimag TM II Class C
The Multimag TM II Class C version with nominal flow of 1.5 m3/h was developed for sanitation companies that use multi-jet meters in their parks, where a good portion of their billing comes from low consumption residential users.
Superior Technology
In order to guarantee top metrological performance, the turbine should have appropriate hydrodynamic balance and should also have high-performing hinges to support it. Additionally, the magnetic transmission should be made with well designed magnets and the gear train should be designed to minimize resistance from friction. 1
Adaptability
Multimag TM II meters can be equipped with CybleTM remote reading interfaces. The application possibilities of this technology are: Optimal reading and billing Leak detection Reverse flow detection Fraud detection Study of consumer habits Additionally, the CybleTM technology has the following characteristics and advantages The CybleTM interface can be applied to any Actaris meter that has a pre-equipped register Reliability Immune to magnetic fraud Field tested for over 10 years
Metrological Characteristics
Nominal diameter (DN) Metrology classes Starting flow rate Minimum flow rate Nominal flow rate Maximum flow rate Qmin Qn Qmax Transitional flow rate Qt L/h L/h L/h m3/h m3/h C bar bar m3 L 9999* 0.02 mm inches B 1 1 30 120 1.5 3 15 1/2" C 9 15 22.5 B 1 1 30 120 1.5 3 20 3/4" C 9 15 22.5 1.5 3 B 18 50 200 2.5 5 25 70 280 3.5 7 40 10 <1 99999** 0.2 25 1" B 30 100 400 5 10 40 1" 1/2 B 70 200 800 10 20 50 2" B 90 300 1 200 15 30
Maximum admissible temperature Maximum admissible pressure Pressure loss group at Qmax Indicating range Minimum scale interval
* Optional 99999 - ** Optional 999999
Head Loss
DN15 (165 mm) DN15 (190 mm) DN20 DN25 DN40 DN50
Dimensions
Nominal diameter (DN) A (length)
E
mm mm mm mm mm
25 260 98 70 1 10 180
The meter thread should be specified as BSP (ISO 228-1) or NPS-M (ANSI/ASME B1.20.1)
Variants
D C
In addition to the standard register, we also offer a inclined and copper can mineral glass register. < Inclined Register Designed for supported installations or wall cases Easy to read
< Glass Copper Register Designed for installations in cases on the ground or those subject to intermittent flooding Tamper-proof cover
Actaris Ltda. Av. Joaquim Boer, 792 - PO Box 209 13477-360 - Americana - SP - Brasil For more information, see www.actaris.com t e l +55 19 3471.8400 fax +55 19 3471.8410
WA-0018.0-GB-08.05 Copyright 2005, Actaris. All Rights Reserved. Actaris reserves the right to change these specifications without prior notice.