Professional Documents
Culture Documents
Write your reaction here including work-up and purification method (e.g. chromatography). Use the form below to risk assess ALL associated reaction and process conditions (e.g. heating, cooling, vacuum), particular hazards (e.g., exotherm, gas evolution, flooding, asphyxiation, burns - hot or cold, explosion), quench procedures, and waste disposal as well as the chemicals to be used, including your expected product, solvents, and known byproducts.
Compound Dicyclopentadiene (1) Cyclopentadiene (2) Iron(II)chloride tetrahydrate (3) Diethylether (4) Potassium hydroxide (5) Dimethylsulfoxide (6) Ferrocene (7) Aqueous hydrogen chloride (8)
x x
x x x x x x x x
Repeat experiment (this book only - please circle one) New experiment (Please circle one):
No
Category:
Standard protocol followed? (Please give reference) As per laboratory manual Reaction conditions and associated processes (heat, cooling, pressure, vacuum etc) and hazards:
(Refer to general risk assessments on Departmental safety website)
Rotavap
Safety glasses: x Control Measures: (please tick boxes) Gloves (type): Scrubbing train (type): Lab coat: x Nitrile: x Fume hood: x Marigolds: Other: Safety screen: Other:
Are specific emergency procedures necessary for this process: Yes/No. If Yes, give details:
In case of spill contain in fume cupboard, close sash, notify demonstrator Reaction and/or reagent quench: n/a
(Give quench type and possible hazard)
Hydrocarbon Waste
Silica Waste
Other (specify):
1, 2, 4, 6, 7 Co-worker signature: JOE BLOGGS Designated Supervisor Signature: L Patel Date: 01/01/12 Date: 01/01/12
Harmful/irritant
Lachrymator
Pyrophoric
Explosive
Corrosive
Oxidising
Write your reaction here including work-up and purification method (e.g. chromatography). Use the form below to risk assess ALL associated reaction and process conditions (e.g. heating, cooling, vacuum), particular hazards (e.g., exotherm, gas evolution, flooding, asphyxiation, burns - hot or cold, explosion), quench procedures, and waste disposal as well as the chemicals to be used, including your expected product, solvents, and known byproducts.
Compound
Ferrocene (1) Dichloromethane (2) Toluene (3) Nitric acid (4) Acetic anhydride (5) Phosphoric acid (6) Acetyl ferrocene (7) Cyclohexane (8)
FW
186.03 84.93 92.14 n/a 102.09 n/a 228.07 n/a
d
n/a 1.325 0.865 n/a 1.08 1.685 n/a n/a
Quantity
3.0 g n/a n/a 5 mL 10 mL 2 mL 3.7 g n/a
mmols
16.1 n/a n/a n/a 90.7 n/a 16.1 n/a
equiv
1 n/a n/a n/a xs cat 1 n/a 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 x x x x x x x x x x x x x x x x
Repeat experiment (this book only - please circle one) New experiment (Please circle one):
No
Category:
Standard protocol followed? (Please give reference) As per laboratory manual p.23 Reaction conditions and associated processes (heat, cooling, pressure, vacuum etc) and hazards:
(Refer to general risk assessments on Departmental safety website)
Are specific emergency procedures necessary for this process: Yes/No. If Yes, give details:
In case of spill contain in fume cupboard, close sash, notify demonstrator Reaction and/or reagent quench: Crushed ice
Waste disposal: Chlorinated Waste
(circle as appropriate)
Hydrocarbon Waste
Silica Waste
Other (specify):
Harmful/irritant
Lachrymator
Pyrophoric
Explosive
Corrosive
Oxidising