Professional Documents
Culture Documents
hello.ftdi.44.echo.c hello.ftdi.44.echo.c.make You will need open terminal and navigate to the location where you saved these files in order for the commands below to work. You must be in the same directory (or provide a path to the file).
You'll need to provide power to both your board and your programmer (FabISP). Connect the programmer to the ISP header on the LED + Button board
The serial monitor window will open. Make sure the "115200 baud" setting is selected.
Step 2: Type a single character into the top text entry area.
The character you type on the keyboard will be sent to the board via the serial port on your computer. The C code on the board will echo back the character that you typed.
Type another character into the top text entry area and hit "send" or hit the <ENTER> key. The characters you have typed so far are stored and echoed back along with the new character that you typed.
Keep typing characters and letting them echo back until you reach the limit.