Professional Documents
Culture Documents
http://www.rcgroups.com/forums/printthread.php?t=638507
Page 1 of 6 1 2 3 Last
Show 100 post(s) from this thread on one page
RC Groups (http://www.rcgroups.com/forums/index.php) - Radios (http://www.rcgroups.com/forums/forumdisplay.php?f=135) - - Article Futaba 6EX 2.4GHz Full Range 6 Channel System Review (http://www.rcgroups.com /forums/showthread.php?t=638507)
#1 pda4you
Futaba 6EX 2.4GHz Full Range 6 Channel System Review
21 Attachment(s)
INTRODUCTION
The much anticipated Futaba full range 6 channel 6EX FASST spread spectrum sport radio system makes use of the 2.4GHz band. Futaba developed their own chip set for both the transmitter and receiver that makes use of Continuous Channel Shifting within the 2.4GHz band. No question, the 2.4GHz radio systems are very popular and are here to stay. With better frequency control, increased reliability and especially added peace of mind, this spread spectrum system gives the RC enthusiast significant advantages. The Futaba 6EX system works flawlessly and marks a bright future for 2.4GHz technology.
Futaba 6EX 2.4GHz System Specifications: TRANSMITTER Channels: Model Memory: Model Types: Modulation: Battery: Weight (with battery): Current drain: 6 6 Air/Heli FASST Futaba Advanced Spread Spectrum Technology 600mAh Ni-Cd 1lb 10oz 170mA
Futaba R606FS Receiver Size: 41.6mm x 27.5mm x 9.2mm (1.64" x 1.08" x .36") 10g 4.8-6V 80mA 126mm (see text) 90 degrees (preferred)
Weight: Voltage Range: Current drain: Antenna Length (each): Antenna Orientation:
1 of 15
5/16/2013 6:00 PM
http://www.rcgroups.com/forums/printthread.php?t=638507
SYSTEM FEATURES
Standard Programming Functions
Model Select with storage for six unique models Model Type - airplane or helicopter Servo Reversing Dual Rate/Exponential End Point Adjustment Digital Trim Fail-safe Battery Fail-safe - moves the throttle to a preset position when the airborne pack reaches 3.8V Stick Mode - choose from Mode 1 through 4 Range Checking - Power Down Mode Changeable Throttle Stick - ratchet or smooth Adjustable Stick Length
2 of 15
5/16/2013 6:00 PM
http://www.rcgroups.com/forums/printthread.php?t=638507
System Package includes: 6-channel 6EX 2.4GHz transmitter Futaba R606FS receiver 600mAh NiCD transmitter battery Neck strap Overnight wall charger Switch harness Detailed instruction manual Futaba Decal set
BACKGROUND
Futabas significant 2.4GHz knowledge comes from their original line of work outside of the hobby: designers of radio-control tools for industrial business. Futaba engineers perfected this technology in their own 2.4GHz tools years before bringing it to the hobby industry.
3 of 15
5/16/2013 6:00 PM
http://www.rcgroups.com/forums/printthread.php?t=638507
Reduced interference
The ability (and reliability) of a transmitter to cope with and reject interference is extremely important for safe aircraft operation. The new Futaba Advanced Spread Spectrum Technology (FASST) system manages this by linking your transmitter to your individual receiver. Upon power up, the receiver looks for a Futaba Easy Link permanent ID code and reacts only to your transmitter. I felt totally locked in and protected by this unique Easy Link code from other transmitter uses on the frequency band.
No more crystals
With 2.4GHz systems, crystals are a thing of the past: the transmitter is able to send on all of the available frequency slots.
4 of 15
5/16/2013 6:00 PM
http://www.rcgroups.com/forums/printthread.php?t=638507
The Futaba 6EX 2.4GHz transmitter and short antenna. Note the antenna is in the 90 degree position. The antenna swivels and rotates so you do not "point" at the model in flight.
The case of the 6EX is unquestionably plastic, typical of sport level systems. It is black with a chrome gimbal surround. It is comfortable to hold, but with the short antenna, it does have a slightly bottom heavy balance point when using a neck strap.
The program screen is located at the bottom of the case. The switch and buttons are very well labeled and easy to actuate. The programing buttons consist of two push buttons and a data input up and down selection switch.
5 of 15
5/16/2013 6:00 PM
http://www.rcgroups.com/forums/printthread.php?t=638507
The LCD display area - here you can clearly see the input buttons and switches.
The stick gimbals and switches are comfortably placed. The gimbals have firm spring tension (my preference) and the sticks have heavy knurling on the knob tops. The standard switch placement is welcomingly familiar with the transmitter - flap on the right side and gear on the left. The switches trigger with a positive audible click and have a solid feel to them. They are short, stout and placed in such a way that I found them easy to actuate and hard to break.
Aileron, elevator and rudder dual rates, channel 6 for flaps, or heli throttle hold.
Channel 5 switch and three position trainer/Idle up switch. The three position switch is unique in that is has a positive click stop to actuate the function or can be pulled beyond the stop where it can be held in training mode.
The power switch is situated well away from the trims and the neck strap hook. The trim levers are digital and placed slightly off stick centers (I found myself hunting for the trim switch location in flight). The transmitter includes a 110v 70mA wall charger and a 600mAh NiCad battery. Battery life allowed plenty of flight time.
6 of 15
5/16/2013 6:00 PM
http://www.rcgroups.com/forums/printthread.php?t=638507
The 6EX has an internal diode, so discharging must be done outside the charge jack. For data storage, the transmitter uses flash memory to hold your model data settings if the NiCad main pack is removed - an improvement, I believe, over the button Lithium battery cells which can be costly and inconvenient to replace.
7 of 15
5/16/2013 6:00 PM
http://www.rcgroups.com/forums/printthread.php?t=638507
The program screen is small but the characters are very large and easy to read.
Mode and select buttons. Simply press and hold both to enter the program mode. Turn on the TX, then select your model number!
6EX Manual
The 6EX manual is excellent. It is well laid out and it begins with a glossary section to help new users with terms and abbreviations. It is clearly written and has a detailed system illustration with descriptions of switches and functions.
Also included is the antenna setup guide for the RX, an owners reference card and some decals.
Futaba has posted the 38 page 6EX Manual on their web site.
8 of 15
5/16/2013 6:00 PM
http://www.rcgroups.com/forums/printthread.php?t=638507
R606FS RECEIVER
Those using 72MHz systems will notice a big change in the look of R606FS receiver. The 2.4GHz band uses a shorter wavelength and the external antennas are much shorter than those used for other frequencies. The receiver uses a short length of flexible cable to extend the antennas well past the case. Only the last 30mm of the wires function as the antenna. The positions of the dual antennas are important. Optimal configuration for the antennas is at 90 degree angles to each other to reduce the possibility of signal shadowing. The proper antenna orientation was easy to accomplish with the extended length of wire included.
Two co-axial wires extend the actual antenna past the case of this unique receiver. While the wires are 126mm long (measured from the case), only the last 30mm is the actual antenna.
The R606FS receiver is full range and it can be used in any size or type of aircraft. This system also supports dual receiver setups for large models. It should be noted that standard 72MHz receivers cannot be used with this transmitter. You must purchase Futaba R606FS receivers for use with this system.
Fail-safe
Another great feature in this entry-level sport system is the smart fail-safe system. Futaba uses a two system approach for fail-safe: one system checks the battery voltage and the other allows the
9 of 15
5/16/2013 6:00 PM
http://www.rcgroups.com/forums/printthread.php?t=638507
user to select the throttle stick position. I set the fail-safe via a software program setting. It worked perfectly going to zero throttle when I shut off the TX to simulate the signal loss.
SERVOS
With the Futaba 6EX you can use any servos you wish and I tested many servo brands and types without issue. It does not come bundled with any servos or airborne receiver battery. I like that Futaba gave me the choice to select the proper servos for my application.
FLIGHT TESTING
I have flown the 6EX in a number of models, but primarily, flight testing was done with a 1.5m powered glider. This plane is large and easy to see and provided an excellent test of the systems range.
You must not fly the system until you exit from the power down mode: attempting flight during power down could result in the loss of your plane! The display clearly indicates POWR dn and the transmitter beeps every few seconds reminding you not to fly. I flew the 1.5m glider to speck height many times. To approximate a worst case scenario for testing purposes, I did two things you should not do: I used parallel receiver antenna orientation and I pointed the transmitter antenna directly at the model. I did not encounter any issues even at visual limits for the model.
10 of 15
5/16/2013 6:00 PM
http://www.rcgroups.com/forums/printthread.php?t=638507
Standard receiver installation in the glider. Note the antennas are parallel - the worst orientation and used for testing only. No glitches or bumps encountered.
I am totally comfortable with the full range claims of this new system. It is clear that this system has been well tested and it worked perfectly for me during testing for this review.
CONCLUSION
I was very impressed with the new Futaba 6EX 2.4GHz system. Perhaps the best thing about the 6EX system is that it frees us from frequency control and conflicts. These systems can be used nearly anywhere. The 6EX system was completely bullet proof and reliable during my flight testing. It is very easy to program and the user interface is simple enough for the first time computer system user. I really liked the short antenna wires on the receiver. You do not have to extend the antenna outside the model making it perfect for scale models. Orient these wires at 90 degrees and go fly! I did not have any issue with "hits", bumps or glitches. I felt totally locked into the model. No issues with latency or delays. I am a firm believer that 2.4GHz systems are here to stay and they bring a bright future to our hobby. Pluses:
11 of 15
5/16/2013 6:00 PM
http://www.rcgroups.com/forums/printthread.php?t=638507
Easy to program Reliable Almost immune to interference Feels locked-in No frequency control worries! Full range Minuses: No flight timer functions 4 character model names No sub trim feature The Futaba 6EX 2.4GHz FASST system is exceptionally reliable and works exactly as advertised. Pick up your system at your local hobby shop or online at Tower Hobbies.
#2 Rudy Vienna
Hi,
EPA means End Point Adjustment. But is the T6EXP EPA not the better Servo Travel Adjustment and the EPA is only a indirect result from travel adjusting? Rudy Checked: It is definitely servo travel/servo throw with a adjustable relation between stickangle and servoangle respectively. And not only a simple and brute throw limitation at an adjustable endpoint.
#3 pda4you
Thanks Rudy yes EPA is end point adjustment.
EPA is different that sub trim - and the perform entirely different funtions. EPA is where the end points of travel are - sub trim is where the center point of travel starts from. EPA does not affect servo center, just the stops. Both are important in my book... Am I missing your point? Mike
#4 Rudy Vienna
In my opinion that what is called EPA with the T6 (and all other futabas??)is an exact proportional adjustment of the stickangle and the servoposition. At every given stickposition. The real endpoint is a goodie of the proportional adjustment and not a brute limit before the stick is in its endposition. A endpointadjuster in my opinion is a limiter anywhere at the stick causing servo-stopping and if you
12 of 15
5/16/2013 6:00 PM
http://www.rcgroups.com/forums/printthread.php?t=638507
move the stick beyond that point you get no any more servoangle. Its a fight between definitions, I know, but the term EPA for a real proportional ServothrowAdjustment seems to be not the best choice by the "inventor" Rudy
#5 bzfrank
I would add that due to the Frequency Hopping technique Futaba uses the system can be used also in most countries of Europe with full power (100mW) legally. This is not the case with most other systems which must be 'throttled down' to meet the EU regulations. Regards Frank
#6 robin andrew
new Futaba 2.4gigs
I will need to know how long the TX will last on the supplied battery and how much current does the RX take. The SPEKTRUM says, use a 2000mah for the RX and the TX has a 1500mha battery, cheers Robin Andrew, Uk j
#7 4*60
quote:"The case of the 6EX is unquestionably plastic, typical of sport level systems. " That is an understatement in my opinion. It could not look or feel cheaper unless it was a Radio Shack toy with TX included.
#8 Julez
Hi!
The TX Module takes about 120mA (not sure about the whole TX), The RX draws 70mA. This is about 10 times as much as a normal PPM RX. The feeling of the TX is ok in my opinion.
#9 Rudy Vienna
Manual pg4: "Current drain 170mA" R.
13 of 15
5/16/2013 6:00 PM
http://www.rcgroups.com/forums/printthread.php?t=638507
#10 dawnron1
Great review, Mike!! Ronnie
#11 carrinsr
1.5M wing span isn't what most sailplane flyers would call "large". Most of my sailplanes are 127" to 149.5" wingspan. Just a comment for your consideration. -- DC
#12 helicycle
How do the heli programming features compare to say a Hitec Optic 6? I know there's no timer, but how about the rest of the available features? I might consider an Optic or regular FM 7CHP over this one, b/c receivers are a lot less expensive and there are much smaller and lighter ones available. Just trying to get the best 'bang for the buck'! -- J
#13 Tfour2
Did your 6EX 2.4GHz box include a smooth throttle ratchet for heli use? Mine did. When changing to the heli ratchet (as directed in the manual) I saw a 2-position switch on the small, separated circuit board marked GENERAL on one side and FRANCE on the other. What is this for?? Thanks, Buzz
#14 FlyStraight
If you're in france then switch it to france otherwise leave it on general. France has lower power requirements from the TX while other countries do not.
#15 Tfour2
Quote:
Originally Posted by FlyStraight If you're in france then switch it to france otherwise leave it on general. France has lower power requirements from the TX while other countries do not.
What power levels does France require that is different from the general setting? Buzz
14 of 15
5/16/2013 6:00 PM
http://www.rcgroups.com/forums/printthread.php?t=638507
All times are GMT -5. The time now is 07:19 AM.
Page 1 of 6 1 2 3 Last
Show 100 post(s) from this thread on one page
Powered by vBulletin Version 3.8.4 Copyright 2000 - 2013, Jelsoft Enterprises Ltd.
15 of 15
5/16/2013 6:00 PM