You are on page 1of 13

+++ HUAWEI 2012-03-26 01:38:48 O&M #146132 %%RST SUBRACK: SRN=1;%% RETCODE = 235307040 Response timeout --END

+++ HUAWEI 2012-03-26 01:39:43 O&M #146151 %%SET SCUPORT: SRN=1, PN=0, Switch=OPEN;%% RETCODE = 235219210 Except for the SCUs in the main BM and TC, port 0 and port 1 on other SCUs must be enabled, and the attributes of these two ports cannot be modified. --END

+++ HUAWEI 2012-03-26 01:41:08 O&M #146165 %%RST SUBRACK: SRN=1;%% RETCODE = 235307040 Response timeout --END

+++ HUAWEI 2012-03-26 01:42:17 O&M #146183 %%MOD SUBRACK: SRN=1, CONNPWR=YES;%% RETCODE = 235218725 There should be one power monitor subrack at most in a cabi net. --END

+++ HUAWEI 2012-03-26 01:44:59 O&M #146215 %%LST BRD: SRN=0, SN=4;%% RETCODE = 0 Execution succeeded. List Board Information ---------------------Subrack No. Subrack name Slot No. Board Class Board Type Logical function type Backup TC board MPU Subrack No. MPU Slot No. Application type of POUc_ TDM Inhibitive Status Logical Slot No. MPS YES NO 0 UNINHIBITED 4 (Number of results = 1) 0 4 TNU 0 TNUa <NULL> TDM_Switching

---

END

+++ HUAWEI 2012-03-26 01:54:56 O&M #146337 %%ADD BRD: SRN=1, BRDCLASS=TNU, BRDTYPE=TNUa, ISTCBRD=NO, MPUSUBRACK=0, MPUSLOT= 0;%% RETCODE = 0 Execution succeeded. --END

+++ HUAWEI 2012-03-26 02:01:34 O&M #146425 %%ADD BRD: SRN=1, BRDCLASS=INT, BRDTYPE=FG2c, SN=20, RED=YES, ISTCBRD=NO, MPUSUB RACK=0, MPUSLOT=0;%% RETCODE = 0 Execution succeeded. --END

+++ HUAWEI 2012-03-26 02:09:11 O&M #146521 %%ADD BRD: SRN=1, BRDCLASS=DPU, BRDTYPE=DPUd, SN=8, MPUSUBRACK=0, MPUSLOT=2;%% RETCODE = 235219418 In external PCU mode, the GPCU board cannot be configured. --END

+++ HUAWEI 2012-03-26 02:12:25 O&M #146560 %%ADD BRD: SRN=1, BRDCLASS=DPU, BRDTYPE=DPUd, SN=8, MPUSUBRACK=0, MPUSLOT=2;%% RETCODE = 235219418 In external PCU mode, the GPCU board cannot be configured. --END

+++ HUAWEI 2012-03-26 02:12:50 O&M #146565 %%ADD BRD: SRN=1, BRDCLASS=DPU, BRDTYPE=DPUd, SN=8, MPUSUBRACK=0, MPUSLOT=2;%% RETCODE = 235219418 In external PCU mode, the GPCU board cannot be configured. --END

+++ HUAWEI 2012-03-26 02:13:15 O&M #146572 %%ADD BRD: SRN=1, BRDCLASS=DPU, BRDTYPE=DPUd, SN=8, MPUSUBRACK=0, MPUSLOT=0;%% RETCODE = 235219418 In external PCU mode, the GPCU board cannot be configured. --END

+++ HUAWEI 2012-03-26 02:15:57 O&M #146611 %%ADD BRD: SRN=1, BRDCLASS=DPU, BRDTYPE=DPUd, LGCAPPTYPE=GPCU, SN=8, MPUSUBRACK= 0, MPUSLOT=0;%% RETCODE = 235219418 In external PCU mode, the GPCU board cannot be configured. --END

+++ HUAWEI 2012-03-26 02:18:28 O&M #146642 %%ADD BRD: SRN=1, BRDCLASS=DPU, BRDTYPE=DPUd, SN=8, MPUSUBRACK=0, MPUSLOT=0;%% RETCODE = 235219418 In external PCU mode, the GPCU board cannot be configured. --END

+++ HUAWEI 2012-03-26 02:40:55 O&M #146915 %%SET ETHPORT: SRN=1, SN=20, BRDTYPE=FG2c, PTYPE=FE, PN=0, AUTO=ENABLE, MTU=1500 , OAMFLOWBW=0, FLOWCTRLSWITCH=ON, FCINDEX=0, ERRDETECTSW=OFF;%% RETCODE = 0 Execution succeeded. --END

+++ HUAWEI 2012-03-26 03:43:32 O&M #147708 %%SET ETHPORT: SRN=1, SN=20, BRDTYPE=FG2c, PTYPE=FE, PN=0, AUTO=ENABLE, MTU=1500 , OAMFLOWBW=0, FLOWCTRLSWITCH=ON, FCINDEX=0, ERRDETECTSW=OFF;%% RETCODE = 0 Execution succeeded. --END

+++ HUAWEI 2012-03-26 03:46:30 O&M #147753 %%ADD DEVIP: SRN=1, SN=20, DEVTYPE=LOGIC_IP, IPADDR="10.210.15.244";%% RETCODE = 0 Execution succeeded. --END

+++ HUAWEI 2012-03-26 03:49:25 O&M #147789 %%ADD ETHIP: SRN=1, SN=20, PN=0, IPINDEX=0, IPADDR="10.210.24.137", MASK="255.25 5.255.248";%% RETCODE = 0 Execution succeeded. --END

+++ O&M

HUAWEI #147814

2012-03-26 03:51:29

%%ADD VLANID: SRN=1, SN=20, IPADDR="10.210.24.142", VLANID=1225;%% RETCODE = 0 Execution succeeded. --END

+++ HUAWEI 2012-03-26 03:54:54 O&M #147861 %%SET ETHPORT: SRN=1, SN=21, BRDTYPE=FG2c, PTYPE=FE, PN=0, AUTO=ENABLE, MTU=1500 , OAMFLOWBW=0, FLOWCTRLSWITCH=ON, FCINDEX=0, ERRDETECTSW=OFF;%% RETCODE = 0 Execution succeeded. --END

+++ HUAWEI 2012-03-26 03:55:13 O&M #147864 %%ACT ETHPORT: SRN=1, SN=20, PN=0;%% RETCODE = 0 Execution succeeded. The object is activated again. --END

+++ HUAWEI 2012-03-26 03:55:36 O&M #147869 %%ACT ETHPORT: SRN=1, SN=21, PN=0;%% RETCODE = 0 Execution succeeded. The object is activated again. --END

+++ HUAWEI 2012-03-26 04:02:31 O&M #147959 %%ADD ETHREDPORT: SRN=1, SN=20, PN=0;%% RETCODE = 0 Execution succeeded. --END

PING 10.210.24.142: 56 data bytes Request time out Request time out Request time out

Request time out

--- 10.210.24.142 ping statistics --4 packet(s) transmitted 0 packet(s) received Percent 100.00 packet lost

+++ HUAWEI 2012-03-26 04:14:42 O&M #148105 %%PING IP: SRN=1, SN=20, SIPADDR="10.210.15.244", DESTIP="10.210.24.142", CONTPI NG=NO;%% RETCODE = 0 Execution succeeded.

9 reports in total (Number of results = 1) --END

+++ HUAWEI 2012-03-26 04:20:06 O&M #148178 %%LST BRD: SRN=1, SN=20;%% RETCODE = 0 Execution succeeded. List Board Information ---------------------Subrack No. Subrack name Slot No. Board Class Board Type Logical function type Backup TC board MPU Subrack No. MPU Slot No. Application type of POUc_ TDM Inhibitive Status Logical Slot No. EPS1 20 YES NO 0 UNINHIBITED 20 (Number of results = 1) --END 1 INT 0 FG2c <NULL> IP

+++ HUAWEI 2012-03-26 04:22:17 O&M #148206 %%LST VLANID: SRN=1, SN=20;%% RETCODE = 0 Execution succeeded.

List IP to VLAN ID Mapping Table -------------------------------Subrack No. Subrack name Slot No. Next Hop IP address. VLAN ID. 1 EPS1 (Number of results = 1) --END 20 10.210.24.142 1225

PING 10.210.24.142: 56 data bytes Request time out Request time out Request time out Request time out

--- 10.210.24.142 ping statistics --4 packet(s) transmitted 0 packet(s) received Percent 100.00 packet lost

+++ HUAWEI 2012-03-26 04:23:55 O&M #148223 %%PING IP: SRN=1, SN=20, SIPADDR="10.210.15.244", DESTIP="10.210.24.142", CONTPI NG=NO;%% RETCODE = 0 Execution succeeded.

9 reports in total (Number of results = 1) --END

+++ HUAWEI 2012-03-26 04:25:33 O&M #148243 %%LST IPPATH:;%% RETCODE = 0 Execution succeeded.

Corresponding results not found --END

PING 10.210.24.142: 56 data bytes Request time out Request time out Request time out Request time out

--- 10.210.24.142 ping statistics --4 packet(s) transmitted 0 packet(s) received Percent 100.00 packet lost

+++ HUAWEI 2012-03-26 04:26:34 O&M #148255 %%PING IP: SRN=1, SN=20, SIPADDR="10.210.24.137", DESTIP="10.210.24.142", CONTPI NG=NO;%% RETCODE = 0 Execution succeeded.

9 reports in total (Number of results = 1) --END

+++ HUAWEI 2012-03-26 04:26:56 O&M #148266 %%LST ETHIP: SRN=1, SN=20;%% RETCODE = 0 Execution succeeded. List Ethernet Port IP Address ----------------------------Subrack No. Subrack name Slot No. Port No. IP address index Local IP addre

ss Subnet mask EPS1 255.255.255.248 (Number of results = 1) --END 1 20 0 0 10.210.24.137

PING 10.210.24.142: 32 data bytes Request time out Request time out Request time out Request time out

--- 10.210.24.142 ping statistics --4 packet(s) transmitted 0 packet(s) received Percent 100.00 packet lost

+++ HUAWEI 2012-03-26 04:30:27 O&M #148309 %%PING IP: SRN=1, SN=20, SIPADDR="10.210.24.137", DESTIP="10.210.24.142", CONTPI NG=NO, PKTSIZE=32;%% RETCODE = 0 Execution succeeded.

9 reports in total (Number of results = 1) --END

+++ HUAWEI 2012-03-26 04:31:40 O&M #148327 %%DSP ETHPORT: SRN=1, SN=20, PN=0;%% RETCODE = 0 Execution succeeded.

ETHPORT state ------------Slot No. Port No. Port type Port state Link Availability Status IP Address-0 Net Mask-0 IP Address-1 Net Mask-1 IP Address-2 Net Mask-2 IP Address-3 Net Mask-3 IP Address-4 Net Mask-4 IP Address-5 Net Mask-5 MAC address State Changed Time State Changed Cause Optic module type Max transmit unit Speed Duplex Auto negotiation Loopback Flow control mode Backup mode or not Primary flag Number of Frames received with VLAN flag Number of Frames sent with VLAN flag Rx correct packages Tx correct packages Rx bad frames Tx bad frames Number of received Pause frame Number of sent Pause frame Number of received Package Bytes Number of sent Package Bytes Number of Bad Uplink TAG packages Number of Bad Uplink MAC packages Number of Uplink Success packages Rx check error packages Number of Sent OAM Loopback packages Number of Sent 802.3AH packages Number of received Unicast packages Number of received Jumbo Frames Number of Success Recieved VLAN Packages Number of Success Recieved Non-VLAN Packages Number of Discard VLAN Packages With UNTAG Number of Discard Non-VLAN Packages With TAG Number of sent Unicast packages Number of sent Jumbo frame (Number of results = 1) --END = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = 20 0 FE electrical port Activated Available 10.210.24.137 255.255.255.248 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 54-89-98-04-23-B9 2012-03-26 02:01:51 First startup <NULL> 1500 100M Full Enable No loopback Disable Backup Yes <NULL> <NULL> 8968 118 0 0 0 0 573952 7552 0 8968 0 8968 0 0 8968 0 0 0 0 0 0 0

+++ HUAWEI 2012-03-26 04:33:08 O&M #148345 %%LST IPRT: SRN=1, SN=20, DSTIP="10.210.24.137";%% RETCODE = 0 Execution succeeded. Corresponding results not found --END

+++ HUAWEI 2012-03-26 04:34:33 O&M #148364 %%DSP ETHPORT: SRN=1, SN=20, PN=0;%% RETCODE = 0 Execution succeeded. ETHPORT state ------------Slot No. Port No. Port type Port state Link Availability Status IP Address-0 Net Mask-0 IP Address-1 Net Mask-1 IP Address-2 Net Mask-2 IP Address-3 Net Mask-3 IP Address-4 Net Mask-4 IP Address-5 Net Mask-5 MAC address State Changed Time State Changed Cause Optic module type Max transmit unit Speed Duplex Auto negotiation Loopback Flow control mode Backup mode or not Primary flag Number of Frames received with VLAN flag Number of Frames sent with VLAN flag Rx correct packages Tx correct packages Rx bad frames Tx bad frames Number of received Pause frame Number of sent Pause frame Number of received Package Bytes Number of sent Package Bytes = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = 20 0 FE electrical port Activated Available 10.210.24.137 255.255.255.248 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 54-89-98-04-23-B9 2012-03-26 02:01:51 First startup <NULL> 1500 100M Full Enable No loopback Disable Backup Yes <NULL> <NULL> 9142 126 0 0 0 0 585088 8064

Number of Bad Uplink TAG packages Number of Bad Uplink MAC packages Number of Uplink Success packages Rx check error packages Number of Sent OAM Loopback packages Number of Sent 802.3AH packages Number of received Unicast packages Number of received Jumbo Frames Number of Success Recieved VLAN Packages Number of Success Recieved Non-VLAN Packages Number of Discard VLAN Packages With UNTAG Number of Discard Non-VLAN Packages With TAG Number of sent Unicast packages Number of sent Jumbo frame (Number of results = 1) --END

= = = = = = = = = = = = = =

0 9142 0 9142 0 0 9142 0 0 0 0 0 0 0

+++ HUAWEI 2012-03-26 04:50:13 O&M #148563 %%EXP CFGMML:;%% RETCODE = 0 Execution succeeded. Session ID = 148563 --END

+++ HUAWEI 2012-03-26 04:50:13 O&M #148563 %%EXP CFGMML:;%% RETCODE = 0 Progress report, Execution succeeded. Progress Report --------------Report Type = Export Status = Start Session ID = 148563 --END

+++ HUAWEI 2012-03-26 04:50:13 O&M #148563 %%EXP CFGMML:;%% RETCODE = 0 Progress report, Execution succeeded. Progress Report --------------Report Type Status Progress Session ID --END

= = = =

Export Progressing 0% 148563

+++ HUAWEI 2012-03-26 04:50:15 O&M #148563 %%EXP CFGMML:;%% RETCODE = 0 Progress report, Execution succeeded. Progress Report --------------Report Type Status Progress Session ID --END

= = = =

Export Progressing 10% 148563

+++ HUAWEI 2012-03-26 04:50:20 O&M #148563 %%EXP CFGMML:;%% RETCODE = 0 Progress report, Execution succeeded. Progress Report --------------Report Type Status Progress Session ID --END

= = = =

Export Progressing 20% 148563

+++ HUAWEI 2012-03-26 04:50:25 O&M #148563 %%EXP CFGMML:;%% RETCODE = 0 Progress report, Execution succeeded. Progress Report --------------Report Type Status Progress Session ID --END

= = = =

Export Progressing 30% 148563

+++ HUAWEI 2012-03-26 04:50:29 O&M #148563 %%EXP CFGMML:;%% RETCODE = 0 Progress report, Execution succeeded. Progress Report --------------Report Type Status Progress Session ID --END

= = = =

Export Progressing 65% 148563

+++ HUAWEI 2012-03-26 04:50:29 O&M #148563 %%EXP CFGMML:;%% RETCODE = 0 Progress report, Execution succeeded. Progress Report --------------Report Type = Export Status = Success Session ID = 148563 The file is saved at /BSC6000/data/mbsc/bam/version_a/ftp/export_cfgmml/CFGMML-B SC0-20120326045013.txt. --END

You might also like