Professional Documents
Culture Documents
Sabroe products are recognised and respected throughout the world for their build quality, longterm operating reliability and cost-effectiveness. You and your customers also reap the benefits of our consistent focus on low life cycle costs and world-leading expertise in the use of naturally occurring refrigerants.
Contents
Control systems
Meeting your exact needs . . . . . . . . . . . . page 4 Sabroe control systems . . . . . . . . . . . . . page 10 Sabroe compressors . . . . . . . . . . . . . . page 20 Sabroe chillers . . . . . . . . . . . . . . . . . . page 34 Sabroe heat pumps . . . . . . . . . . . . . . . page 46
Sabroe has been in the business of industrial cooling and heating ever since 1897. Weve proved we can repeatedly and consistently deliver on our customers requirements no matter how big and complex, or how small and straightforward. We listen to what your real challenges are, and what you really want and need. And then we focus more than a century of specialist knowledge on how best to achieve it.
Compressors
Compressor
Valve
Natural refrigerants
Naturally occurring refrigerants (including ammonia, carbon dioxide, air and water, as well as hydrocarbons) have the lowest GWP and ODP values. Widely known as natural refrigerants, they also feature in legislative and technical requirements in more and more countries and are more and more a part of consumer awareness. All Sabroe products are designed to operate with naturally occurring refrigerants as standard.
ODP 0.055 0 0 0 0
ODP (Ozone Depletion Potential) is a number that indicates the effect a refrigerant has on the ozone layer, compared with dichlorodifluoromethane (R12) as index 1.0. GWP (Global Warming Potential) is a number that indicates the effect a refrigerant has on global warming, compared with carbon dioxide (CO 2) as index 1.0.
GWP HFC CFC
ODP
HFC HCFC
HFC
Natural refrigerants
Servic e cos
Inv est
ts
me
nt
cos
ts
Energy costs
Operating costs
(LCC = 20 years)
Sabroe products and systems are renowned for their reliability and technological excellence, backed by our ability to meet even the most demanding customer requirements. One of the many unique advantages of doing business with Sabroe is that our compressor, chiller and heat pump products are systematically tested before delivery, ensuring rapid, glitch-free commissioning and a bare minimum of interruption to your operations.
The extensive specialist knowledge available from Sabroe Parts Centre helps you
prevent unnecessary and expensive breakdowns identify minor malfunctions before they develop into major problems cut operating costs by ensuring greater efficiency extend the service life of all Sabroe equipment and installations update your equipment and optimise your operating procedures
10
Remote access
Web access
iRIS
ISAC
Unisab lll
CP Optimiser
Process hardware
11
Control systems
12
Control systems
PLC systems
Compressor sequencing
Advantages
Single, fully integrated control system for use with virtually all types of compressors and chillers Easy to integrate into the vast majority of industrial control systems, providing seamless transfer of data between systems Monitoring, control and diagnostics capabilities combined in one compact, integrated unit Compressor sequencing and load sharing are possible without additional equipment
Benefits
Ensures more effective monitoring, control and diagnostics of a wide range of key refrigeration installations Ensures effective management of important operating data and secures the production process for best performance Does away with the need for multiple systems, resulting in significant equipment savings Keeps power consumption to a minimum and reduces operating costs
Intuitive, easy-to-use interface, with a Requires fewer operator skills, consistent look and feel resulting in lower training costs
Connectivity
The Unisab III systems controller has normal industry-standard communication ports fitted as standard, and therefore does not require additional communication gateways. Data can then be made available via any kind of network, where virtually any computer can be used to monitor and operate the Unisab III systems controller.
Functionality
onfigurable for both screw compressors and C reciprocating compressors, with or without variable-speed drive (VSD), and using any refrigerant Built-in regulation of suction pressure, water temperature, discharge pressure, etc. Limitations on suction pressure, discharge pressure, motor current, etc. Logging of operating history and profiles for effective fault-finding and diagnosis E-mail dispatch in case of alarm or shut down
Control systems
Retrofit
A wide range of Unisab III retrofit kits are available to provide all the advantages of upgrading a wide range of existing compressors to a modern controls standard for improved performance and control system integration.
Connectivity . . . . . . . . . Multiple communication ports, including Modbus TCP, Profibus DP and Sequence Bus, as standard Smartphone app available . iPhone Sequencing . . . . . . . . . As many as 14 refrigeration compressors, chillers and heat pumps of different makes and types can be linked in sequence, to ensure effective load sharing and capacity optimisation Diagnostics . . . . . . . . . Detailed operating data documenting 30 shut-down situations Refrigerants . . . . . . . . . Pre-loaded with the requisite data about all refrigerants normally used Operating languages . . . . Multiple languages available as standard, with additional languages as options Enclosure . . . . . . . . . . IP54 Ambient temperature . . . . 055C Power supply . . . . . . . . 85250 Volt AC, 5060 Hz Dimensions (H x W x D) . . . 380 x 300 x 210 mm Weight . . . . . . . . . . . . 6.5 kg
13
Control systems
14
Control systems
Sabroe CP Optimiser
Automatic device for balancing R717 condensing pressure against compressor efficiency
Many refrigeration systems that use R717 (ammonia) as refrigerant and feature an evaporative condenser are operated using a fixed set point to maintain a constant condensing pressure. This is rarely ideal, as the energy consumption of the compressors typically increases by 3% for every C the condensing pressure rises shaft power consumption is directly influenced by condensing pressure. This impacts overall operating costs and plant efficiency. Reducing condensing pressure improves compressor efficiency, but itself also requires energy. Maximum overall efficiency stems from the best possible balance between compressor energy consumption and the energy required to reduce condensing pressure. The CP Optimiser automatically calculates this energy balance, taking into account changing loads and conditions. This paves the way to considerable savings on energy bills, which means the CP Optimiser normally pays for itself within a matter of months.
Advantages
Automatic operation based on inputs from just two sensors temperature and humidity Output signal can be connected directly to PLCs and frequency converters No time-consuming programming or complicated technical set-up required No manual intervention or special operator skills required
Benefits
Substantial reduction in compressor energy consumption, resulting in lower operating costs Easy to integrate with modern monitoring and control systems to ensure maximum efficiency Easy to commission and operate, and helps eliminate human error Virtually no maintenance, calibration or attention necessary after commissioning Straightforward, inexpensive way to boost operating efficiency and reduce running costs
No special requirements for integration into new or existing R717based refrigeration set-ups
The CP Optimiser works with the following equipment: Evaporative condensers Air-cooled condensers Open cooling towers It can also be configured for use with other types of equipment, by request.
Mounting
The CP Optimiser unit is a small box of electronics that is easy to mount in virtually any convenient location. either indoors or outdoors. The unit only requires a 24-Volt DC power supply and data from appropriate sensors for measuring temperature and relative humidity.
Control systems
CP Optimiser
Condenser controller
Condenser 2
Condenser 3 VSD
Supply voltage . . . . Inputs . . . . . . . Relative humidity . . . Outputs . . . . . . . Dimensions (H x W x D) Enclosure . . . . . . Cable connections . . .
24-Volt DC Temperature 420 mA/050C 420 mA/0100% RH Set point signals normally 420 mA or 010-Volt DC 115 x 90 x 55 mm IP54 4 x PG7
Temperature and relative humidity sensors are not included with the Sabroe CP Optimiser, but are available as optional equipment. Controller (PLC) not included.
15
Control systems
16
Control systems
Reports
Design your own reports or let us help you
System restore
Quick recovery from fatal system breakdown
Web access
Safely connect to your plant from anywhere
Service counters
Provide a maintenance plan for your plant
Advantages
Extensive Sabroe practical experience is embedded in all ISAC modules All modules are designed as modular building blocks and based on standardised interfaces and data exchange configurations Each module designed and tested individually to eliminate technical incompatibilities Supports a wide range of standard configurations, ranging from single touch screens to multiple workstations Based on standardised components with a very high degree of documentation, for maximum consistency and efficiency
Benefits
Ensures rapid, cost-effective application of best practise Minimises time required for design, planning, configuration and service
High saving potential on commissioning, running in and system optimisation, as well as on energy consumption
Compatibility/integration
The Sabroe ISAC system is easily scaleable to meet a broad spectrum of possible refrigeration plant configurations, and to give the best match with the performance and technical requirements of each individual installation. At the same time, any subsequent plant modifications or extensions will build on and integrate into the original ISAC monitoring and controls configuration package. ISAC provides some of the following standard components: Multiple compressor interfaces Flexible cold stores main options Defrost queue management Conditional set points and neutral zones Smart compressor sequencing control
The ISAC system is fully integrated with the iRIS remote monitoring system. The software structure is compatible with the exchange of data between these two systems without any timeconsuming software updates. ISAC is based on and completely compatible with industry-standard Siemens S7 hardware and GE IFIX Proficy SCADA software.
Control systems
PC SCADA
Process hardware
PLC control
Web access
Touch screen
17
Control systems
18
Control systems
iRIS
Data transmitter Customers process hardware
Advantages
Reliable, comprehensive operating data documenting what is actually happening in the refrigeration installation Performance and energy consumption benchmarks on a comparative basis
Benefits
Best possible basis for streamlining and optimising operations based on documented facts
Greater capacity, reduced energy consumption and better plant performance Solid operating data as the basis for decisions about new investment and new equipment configurations Predictive maintenance and lower service costs
More cost-effective operations and solid facts for maintenance and extension Identifying potential problems and inefficiencies before they give rise to disruption
Analysis and guidance by refrigeration Access to world-class technical technology experts from Sabroe and assistance and optimisation Johnson Controls knowledge
Compressors
The intelligent iRIS loop All information is subject to change without notice.
Compatibility/integration
The iRIS software platform can be adapted to a wide range of refrigeration systems, right from individual compressors to complete refrigeration plants, and is equally well suited for new installations and existing plants. iRIS is designed to interface seamlessly with Unisab III compressor controllers and plant control systems designed using ISAC toolbox modules. It is also possible to integrate with other systems where data are made available.
Control systems
iRIS
Customer Johnson Controls
19
Compressors
20
Compressors
Reciprocating compressors
Screw compressors
100
1000
10000
21
Compressors
22
Range
Six different models are available to provide swept volumes of between 116 and 273 m3/h at 1800 rpm.
Advantages
High coefficient of performance (COP), with excellent performance even under part-load conditions Special design ensures low noise and vibration
Benefits
Low power consumption, which greatly reduces operating costs
Wider range of possible mounting locations, and minimal expenditure on noise attenuation systems Power consumption and operating costs kept to a minimum
Variable-speed drive (optional) provides stepless capacity control over the entire operating range Repairs can be undertaken in situ, without removing the compressor Easy to access for service, with limited spare parts requirements
Easy, inexpensive maintenance, which helps limit downtime and reduce operating costs
22
Optional equipment
nisab III systems controller U Variable-speed drive line Gauges, thermometers and temperature/pressure control switches Extended cylinder capacity control Oil level regulator (for use in parallel systems) ATEX-compliant configuration Oil separators with coalescing element Special vibration dampening
Compressors
Model
Number of cylinders
Bore x stroke
Swept volume at 1800 rpm m3/h 116 175 233 136 204 273
Nominal capacities kW R717 Single/high stage -10/+35C 53 79 105 62 93 123 0/+35C 85 127 170 100 149 199 Booster -40/-10C 14 21 28 17 25 33 R404A Single/high stage 0/+35C 85 127 169 99 149 198 -10/+35C 54 81 108 63 95 127 L
Weight excluding motor H 900 900 900 900 900 900 kg 480 520 550 480 520 550
Nominal capacities are based on 1500 rpm and 5C liquid subcooling. Note: some refrigerants may make it possible to operate CMO compressors at speeds of up to 1800 rpm. Sound pressure levels in free field, over reflecting plane and one metre distance from the unit.
23
23
Compressors
24
Compressors
Range
Fifteen different models are available to provide swept volumes of between 250 and 1357 m3/h at 1800 rpm.
SMC 108 single-stage reciprocating compressor unit with Unisab III systems controller
Advantages
High coefficient of performance (COP), with excellent performance under part-load conditions Variable-speed drive (optional) provides stepless capacity control over the entire operating range Repairs can be undertaken in situ, without removing the compressor Easy to access for service, with limited spare parts requirements
Benefits
Low power consumption, which greatly reduces operating costs
Easy, inexpensive maintenance, which helps limit downtime and reduce operating costs Low oil carry-over, which cuts back on oil costs
Compressors
SMC 108 singlestage reciprocating compressor block with gauges Model Number of cylinders SMC 104 S SMC 104 L SMC 104 E SMC 106 S SMC 106 L SMC 106 E SMC 108 S SMC 108 L SMC 108 E SMC 112 S SMC 112 L SMC 112 E SMC 116 S SMC 116 L SMC 116 E 4 4 4 6 6 6 8 8 8 12 12 12 16 16 16 All information is subject to change without notice.
Optional equipment
nisab III systems controller U Variable-speed drive line Gauges, thermometers and temperature/pressure control switches Extended cylinder capacity control Oil level regulator (for use in parallel systems) ATEX-compliant configuration Special vibration dampening
Compressors
Bore x stroke
Nominal capacities kW R717 Single/high stage -10/+35C 129 167 206 194 251 309 259 335 412 388 502 618 517 669 824 0/+35C 209 266 324 313 398 486 417 531 648 626 796 972 834 1062 1297 Booster -40/-10C 35 46 57 52 70 86 70 93 115 106 140 172 141 187 230 R404A Single/high stage 0/+35C 205 208 N/A 308 312 N/A 410 416 N/A 616 624 N/A 821 831 N/A -10/+35C 132 235 N/A 197 202 N/A 263 270 N/A 395 405 N/A 526 539 N/A L
Weight excluding motor H 1103 1103 1103 1108 1108 1108 1103 1103 1103 1314 1314 1314 1314 1314 1314 kg 830 830 830 925 925 925 990 990 990 1660 1660 1660 1760 1760 1760
mm 100 x 80 100 x 100 100 x 120 100 x 80 100 x 100 100 x 120 100 x 80 100 x 100 100 x 120 100 x 80 100 x 100 100 x 120 100 x 80 100 x 100 100 x 120
W 1228 1228 1228 1190 1190 1190 1201 1201 1201 1290 1290 1290 1301 1301 1301
271 339 339 407 509 509 543 679 679 814 1018 1018 1086 1357 1357
2400-2800 2400-2800 2400-2800 2400-2800 2400-2800 2400-2800 2400-2800 2400-2800 2400-2800 24253000 24253000 24253000 24753200 24753200 24753200
Nominal capacities are based on 5C subcooling and 1500 rpm. SMC-E series: max. rpm 1500 for R717 SMC-S series: max. rpm 1500 for R404A SMC-L series: max. rpm 1200 for R404A Sound pressure levels in free field, over reflecting plane and one metre distance from the unit.
25
Compressors
26
Range
Six different models are available to provide swept volumes of between 97 and 452 m3/h at 1500 rpm.
HPC 108 single-stage reciprocating compressor unit (40 bar) with Unisab III systems controller
Advantages
High coefficient of performance (COP), with excellent performance under partload conditions Variable-speed drive (optional) provides stepless capacity control over the entire operating range Provides exceptionally high condensing temperatures up to 70C
Benefits
Low power consumption, especially under part-load conditions. This greatly reduces operating costs Power consumption and operating costs kept to a minimum
Matches radiator temperature in most domestic/commercial heating systems, making HPO/HPC units ideal in district heating, etc Lower repair and maintenance costs, and less downtime
Designed for easy service access, and repairs can be undertaken in situ, without removing the compressor Special oil separator design based on coalescer technology
Optional equipment
nisab III systems controller U Variable-speed drive line Gauges, thermometers and temperature/pressure control switches Extended cylinder capacity control ATEX-compliant configuration Special vibration dampening
Compressors
Model
Number of cylinders
Bore x stroke
Swept volume
Nominal capacities kW Heating R717 Cooling R717 0/+55C 71 106 141 168 252 335 Cooling R410A 0/+35C 117 176 235 284 426 568 Cooling R744 -50/-10C 92 138 184 228 343 457 Cooling R744 -40/-5C 138 207 276 338 507 676 L
Weight excluding motor H 985 985 985 1103 1108 1103 kg 510 550 580 850 1025 1100
mm HPO 24 HPO 26 HPO 28 HPC 104S HPC 106S HPC 108S 4 6 8 4 6 8 70 x 70 70 x 70 70 x 70 100 x 80 100 x 80 100 x 80
m /h
3
Nominal capacities are based on 1500 rpm. Nominal capacities for R744 are based on no subcooling in cascade cooler, 10K useful suction superheat. Sound pressure levels in free field, over reflecting plane and one metre distance from the unit.
27
Compressors
28
Compressors
Range
Eight different models are available to provide swept volumes of between 175 and 1018 m3/h at 1500 rpm.
TSMC 108 two-stage reciprocating compresor unit with intermediate cooling system and Unisab lll systems controller
Advantages
Splitting the temperature lift into two separate stages reduces overall energy consumption Relatively small footprint
Benefits
Two-stage installations are relatively cost-effective, which helps reduce energy costs Can be installed in relatively small locations, or where space is limited Low power consumption, which greatly reduces operating costs
High coefficient of performance (COP), with excellent performance under part-load conditions Variable-speed drive (optional) provides stepless capacity control over the entire operating range
Optional equipment
nisab III systems controller U Gauges, thermometers and temperature/pressure control switches Extended cylinder capacity control Oil level regulator (for use in parallel systems) ATEX-compliant configuration Special vibration dampening
Compressors
Model TCMO 28 TCMO 38 TSMC 108 S TSMC 108 L TSMC 108 E TSMC 116 S TSMC 116 L TSMC 116 E All information is subject to change without notice.
Compressors
Bore x stroke
mm 70 x 70 70 x 82 100 x 80 100 x 100 100 x 120 100 x 80 100 x 100 100 x 120
Low-pressure side swept volume at 1500 rpm m3/h 175 *) 204 *) 339 424 509 669 848 1018
Nominal capacities kW -40/+35C R134a R404A 11 14 30 31 **) NA 60 62 **) NA 27 32 66 68 **) NA 132 136 **) NA
Dimensions in mm Direct-coupled unit without intermediate cooler R507 28 33 70 72 **) NA 139 144 **) NA L 14001750 14001750 19002500 19002500 19002500 24753200 24753200 24753200 W 700 700 1050 1050 1050 1150 1150 1150 H 1000 1000 1125 1125 1125 1335 1335 1335
Weight excluding motor kg 500 500 1000 1000 1000 1800 1800 1800
Nominal capacities are at 1500 rpm except for: *) at 1800 rpm, **) at 1200 rpm. Nominal capacities are based on 2C subcooling from condenser, 2C superheat and liquid subcooling in intermediate cooler to 10C above intermediate temperature. Sound pressure levels in free field, over reflecting plane and one metre distance from the unit.
29
Compressors
Compressors
30
Range
Eight different models are available to provide swept volumes of 204847 m3/h at 3000 rpm.
SAB 120 screw compressor unit with Unisab lll systems controller
Advantages
Variable-speed drive and stepless capacity control ensure that capacity is always adjusted to suit requirements SAB screw compressor units are all equipped with a Unisab lll systems controller Cold Start valve lubricates the compressor, with no oil pump needed SuperFilter II oil filter captures 99% of all particles larger than 5 microns
Benefits
Maximum part-load efficiency and lowest possible operating costs
More efficient operating profile, less downtime and longer service life
Lower operating costs and less maintenance Longer bearing life, providing maximum reliability and savings on both maintenance and replacement Significant reductions in space requirements
Compressors
Model SAB 120 S SAB 120 M SAB 120 L SAB 120 E SAB 151 S SAB 151 M SAB 151 L SAB 151 E All information is subject to change without notice.
Optional equipment
ariable-speed drive V Thermosyphon and water-cooled oil coolers, with 3-way oil temperature control valve Liquid injection oil cooling (EZ Cool) Dual SuperFilter II oil filters (on SAB 151 models only) Complete economiser systems Demand oil pump controlled by Unisab III systems controller Sensors and transmitters for control by external PLC systems
Compressors
Swept volume at 3000 rpm m3/h 204 255 316 413 484 571 708 847 High stage -10/+35C 121 156 200 270 305 369 469 568 R717 Booster -40/-10C 36 48 61 83 97 117 149 180
Nominal capacities in kW R404A High stage -10/35C 115 152 195 261 305 367 466 560 0/+40C 157 207 265 355 416 500 635 763 36 47 61 82 87 105 133 161 With economiser R717 -40/+35C 47 63 80 107 126 151 192 231 R404A
Dimensions in mm
LxWxH 2200 x 1300 x 1500 2200 x 1300 x 1500 2200 x 1300 x 1500 2200 x 1300 x 1500 2800 x 1300 x 1700 2800 x 1300 x 1700 2800 x 1300 x 1800 2800 x 1300 x 1800
dB(A) 85 86 88 89 90 91 91 92
Nominal capacities are based on 3000 rpm. New oil separator frame design available for SAB 151 Sound pressure levels in free field, over reflecting plane and one metre distance from the unit.
31
Compressors
32
Compressors
Range
Thirteen different models are available to provide swept volumes of 8389053 m3/h at 3000 rpm.
SAB 193 screw compressor unit with Unisab lll systems controller
Advantages
Variable-speed drive and stepless capacity control ensures that capacity is always adjusted to suit requirements SAB screw compressor units are all equipped with a Unisab lll systems controller Cold Start valve lubricates the compressor, with no oil pump needed SuperFilter II oil filter captures 99% of all particles larger than 5 microns
Benefits
Maximum part-load efficiency and lowest possible operating costs
More efficient operating profile, less downtime and longer service life
Lower operating costs and less maintenance Longer bearing life, providing maximum reliability and savings on both maintenance and replacement Significant reductions in space requirements Highly efficient oil carry-over as a result of two-stage separation
Optional equipment
ariable-speed drive V Thermosyphon and water-cooled oil coolers, with 3-way oil temperature control valve Liquid injection oil cooling (EZ Cool) Dual external oil filters (SuperFilter II type) Complete economiser systems Demand oil pump controlled by Unisab III systems controller Sensors and transmitters for control by external PLC systems
Compressors
Model Swept m3/h SAB 193 S SAB 193 L SAB 233 S SAB 233 L SAB 233 E SAB 283 S SAB 283 L SAB 283 E SAB 355 S SAB 283 X SAB 355 L SAB 355 E SAB 355 X 838 1118 1475 1856 2258 2640 3326 3998 4134 4516 5638 7175 9053 All information is subject to change without notice.
Compressors
Capacities in kW R717 High stage -10/+35C 541 723 974 1220 1520 1767 2215 2667 2785 3033 3771 4793 N/A Booster -40/-10C 164 220 292 366 456 530 664 800 836 910 1131 1438 1796 R404A High stage 0/+40C -10/35C 524 709 922 1199 1472 1694 2079 2524 2649 2832 3418 4300 N/A 779 1041 1404 1760 2191 2544 3190 N/A 4033 N/A 5459 6940 N/A With economiser R717 -40/+35C 155 207 271 340 424 500 627 755 786 844 1065 1354 1681 213 289 379 492 606 707 874 1064 1116 1185 1457 1838 2139 R404A
Dimensions in mm LxWxH 3145 x 1470 x 1562 3232 x 1470 x 1562 3388 x 1497 x 2317 3388 x 1497 x 2342 4118 x 1775 x 2534 4121 x 1858 x 2590 4121 x 1858 x 2647 4406 x 2075 x 2813 4350 x 2400 x 3400 4582 x 2075 x 2815 4350 x 2400 x 3400 5600 x 2450 x 3700 5600 x 2450 x 3700
Weight excluding motor/oil kg 2370 2470 3350 3450 4550 5700 5850 7650 8000 8950 8250 11100 11300
Nominal capacities are based on 3000 rpm. New oil separator frame design available for SAB 193. Sound pressure levels in free field, over reflecting plane and one metre distance from the unit.
33
Compressors
34
The use of secondary refrigerants water, glycol, brine, etc. is increasing rapidly because of the demand for safer installations and an intense, continuous focus on energy efficiency. Another driver lies in both national and international legislation that requires phasing out particular refrigerants because of their environmental impacts.
Compliance
All Sabroe chiller units are fully compliant with appropriate major international design codes and the specifications laid down by the most common classification societies. Approval in accordance with other technical requirements, specific national legislation or other classification societies requirements is available on request.
35
Chillers
Compressors
36
Range
There are 21 different standard models in this range of packaged chillers, with capacities ranging from 50 kW to 1400 kW. Customised configurations are also available for use with remote air-cooled or evaporative condensers, and for twin or multi-packages, designed to provide particularly large cooling capacities.
Advantages
Factory-assembled, pre-tested packaged units
Benefits
Easy pre-commissioning makes installation and running-in both faster and cheaper. Factory acceptance tests (FAT) available as an option
Optional equipment
ariable-speed drive V Soft-starter or Y/D starter De-superheater Sub-cooler External condenser Control panel mounted separately
Avoid paying for greater capacity Comprehensive selection of compressor capacities, making it easier than needed to match particular requirements Very easy access for service Improves safety, ensures maximum reliability and global sourcing of parts Greater safety and outstanding reliability
Indirect cooling and uncomplicated flooded evaporating system, using natural ammonia (R717) only Plate evaporator/condenser are easy to open and service
Water: inlet 12C, outlet 6C Type Capacity kW NSPAC 24-A 92 NSPAC 34-A 108 NSPAC 26-A 138 NSPAC 36-A 162 NSPAC 28-A 184 NSPAC 38-A 215 PAC 104 S-A 226 PAC 104 L-A 286 PAC 106 S-A 338 PAC 104 E-A 341 PAC 106 L-A 429 PAC 108 S-A 451 PAC 106 E-A 523 PAC 108 L-A 572 PAC 112 S-A 677 PAC 108 E-A 697 PAC 112 L-A 858 PAC 116 S-A 902 PAC 112 E-A 1046 PAC 116 L-A 1144 PAC 116 E-A 1394
Dry weight kg 1400 1450 1450 1600 1600 1650 3100 3250 3500 3400 3550 3700 3700 3900 4650 4300 5000 5350 5300 5650 6300
L 2500 2500 2500 2700 2700 2900 3300 3300 3300 3300 3300 3300 3550 3550 4130 3850 4130 4130 4550 4900 5750
Dimensions in mm W 1500 1500 1500 1500 1500 1500 1850 1850 1850 1850 1850 1850 1850 1850 1850 1850 1850 1850 1850 1850 2000
H 2200 2200 2200 2200 2200 2200 2300 2300 2300 2300 2300 2300 2300 2300 2450 2450 2450 2450 2450 2450 2600
Chillers
Ethylene glycol 30%: inlet -4C, outlet -8C Type Capacity E-motor kW NSPAC 24-C NSPAC 34-C NSPAC 26-C NSPAC 36-C NSPAC 28-C NSPAC 38-C PAC 104 S-C PAC 104 L-C PAC 106 S-C PAC 104 E-C PAC 106 L-C PAC 108 S-C PAC 106 E-C PAC 108 L-C PAC 112 S-C PAC 108 E-C PAC 112 L-C PAC 116 S-C PAC 112 E-C PAC 116 L-C PAC 116 E-C 47 55 71 83 94 110 113 147 170 183 220 227 279 294 340 371 441 453 557 588 743 kW 15 22 22 30 30 37 37 45 55 55 75 75 90 90 110 110 132 160 160 200 250
Dry weight kg 1400 1400 1450 1500 1550 1600 3000 3050 3250 3200 3450 3550 3600 3650 4400 4100 4600 5150 5050 5400 6000 L 2500 2500 2500 2600 2600 2700 3300 3300 3300 3300 3300 3300 3300 3300 4130 3600 4130 4130 4130 4130 4550
Dimensions in mm W 1500 1500 1500 1500 1500 1500 1850 1850 1850 1850 1850 1850 1850 1850 1850 1850 1850 1850 1850 1850 2000 H 2200 2200 2200 2200 2200 2200 2300 2300 2300 2300 2300 2300 2300 2300 2450 2450 2450 2450 2450 2450 2600
Sound level
dB(A)
68 68 68 69 69 70 76 77 78 77 79 79 79 80 80 80 81 81 81 82 83
Condenser: water inlet 25C, outlet 30C Motor: 3 x 400V, 50 Hz, 1460 rpm The above data are only valid for the stated temperatures and operating conditions.
Capacities are nominal. Sound pressure levels in free field. All sound measuring has been carried out according to ISO 9614-2 at a distance of 1 m.
Compliance
All Sabroe chiller units are fully compliant with appropriate major international design codes and the specifications laid down by the most common classification societies. Approval in accordance with other technical requirements, specific national legislation or other classification societies requirements is available on request.
37
Compressors
PAC ammonia-based chillers are fully integrated packaged units, designed to take full advantage of the many different models of ultra-reliable Sabroe screw compressors. They are popular because there is such a wide range of different standard sizes, and they are also particularly easy to customise to meet specific requirements. The integrated design, with the plate evaporator/condenser, oil separator and control system all built in, means PAC units provide exceptional refrigeration capacity while only taking up a minimum of space. They are ideal for use in indirect cooling set-ups, and in installations where it is important to use future-compatible natural refrigerants, such as ammonia. The advanced technology and the well-matched integration of the component systems make these chillers so energy efficient that their low operating costs make them the most economical choice over the lifetime of a refrigeration plant.
Range
There are 19 different standard models in this range of packaged chillers, with capacities ranging from approx. 200 kW to 6200 kW. Customised configurations are also available for use with remote aircooled or evaporative condensers, and for twin or multi-packages, designed to provide particularly large cooling capacities.
Advantages
Factory-assembled, pre-tested packaged units
Benefits
Easy pre-commissioning makes installation and running-in both faster and cheaper. Factory acceptance tests (FAT) available as an option Avoid paying for greater capacity than needed
Optional equipment
ariable-speed drive V Soft-starter or Y/D starter De-superheater Sub-cooler External condenser Control panel mounted separately
Comprehensive selection of compressor capacities, making it easier to match particular requirements Very easy access for service
Improves safety, ensures maximum reliability and global sourcing of parts Greater safety and outstanding reliability
Indirect cooling and uncomplicated flooded evaporating system, using natural ammonia (R717) only Plate evaporator/condenser are easy to open and service
Compressors
Water: inlet 12C, outlet 7C Type PAC 120 S-A PAC 120 M-A PAC 120 L-A PAC 120 E-A PAC 151 S-A PAC 151 M-A PAC 151 L-A PAC 193 S-A PAC 151 E-A PAC 193 L-A PAC 233 S-A PAC 233 L-A PAC 233 E-A PAC 283 S-A NSPAC 283 L-A NSPAC 283 E-A NSPAC 355 S-A NSPAC 283 X-A NSPAC 355 L-A Capacity kW 197 254 326 441 496 600 761 885 921 1180 1595 2009 2481 2859 3596 4367 4516 4939 6180 E-motor kW 55 75 75 110 132 132 200 200 200 250 355 400 500 630 800 900 1000 1000 1250 R717 charge kg 38 40 50 54 55 59 75 81 80 91 169 184 211 230 350 391 410 450 700 Operational weight kg 4000 4150 4550 4800 5600 5700 6200 6400 6350 7000 11500 12500 15200 17000 20500 25500 28000 30000 40000 L 4310 4310 4310 4560 3800 5700 3940 4600 4600 5300 5500 6700 6700 7500 7300 8500 8500 9100 10000 Dimensions in mm W 1870 1870 1870 1870 2070 2070 2090 2350 2090 2350 2900 3000 3050 3400 3700 3700 4000 4000 4000 H 2260 2260 2260 2360 2360 2360 2450 2450 2450 2450 3200 3200 3400 3400 4500 4700 4700 4700 6000 Sound level dB(A) 82 83 84 86 88 89 89 82 90 82 83 83 84 85 83 83 83 83 83
Chillers
Type
PAC 120 S-C PAC 120 M-C PAC 120 L-C PAC 120 E-C PAC 151 S-C PAC 151 M-C PAC 151 L-C PAC 193 S-C PAC 151 E-C PAC 193 L-C PAC 233 S-C PAC 233 L-C PAC 233 E-C PAC 283 S-C PAC 283 L-C NSPAC 283 E-C NSPAC 355 S-C NSPAC 283 X-C NSPAC 355 L-C
Capacity kW
109 141 180 243 275 333 422 489 512 653 880 1103 1373 1597 1995 2412 2525 2752 3418
E-motor kW
55 75 75 110 110 132 160 200 200 250 315 400 500 560 710 900 900 1000 1200
R717 charge kg
38 39 49 53 54 57 73 78 77 87 161 175 198 211 230 374 380 400 600
Operational weight kg
4000 4150 4500 4700 5550 5600 6100 6250 6200 6750 11250 12100 14700 16350 19000 24500 26000 28000 38000
Dimensions in mm L
4310 4310 4310 4310 3940 3940 3940 4600 4290 5000 5200 5800 6500 6700 7100 7300 8000 8500 9500
Sound level H
2260 2260 2360 2360 2360 2360 2450 2450 2450 2450 3200 3200 3400 3400 3400 4500 4700 4700 6000
W
1870 1870 1870 1870 2070 2070 2090 2350 2090 2350 2750 2750 2800 3150 3700 3700 4000 4000 4000
dB(A)
82 83 84 86 88 89 89 82 90 82 84 84 84 86 88 84 84 84 84
Condenser: water inlet 30C, outlet 35C Motor: 3 x 400V, 50 Hz, 2960 rpm The above data are only valid for the stated temperatures and operating conditions.
Capacities are nominal. Sound pressure levels in free field. All sound measuring has been carried out according to ISO 9614-2 at a distance of 1 m.
Compliance
All Sabroe chiller units are fully compliant with appropriate major international design codes and the specifications laid down by the most common classification societies. Approval in accordance with other technical requirements, specific national legislation or other classification societies requirements is available on request.
All information is subject to change without notice.
39
Compressors
ChillPAC ammonia-based chillers are designed from the outset to achieve an ultracompact format, so narrow that it can even pass through a normal doorway. The fully integrated design, with an extra-compact shell-and-plate evaporator/ condenser, oil separator and control system all built in, means ChillPAC units provide exceptional refrigeration capacity while only taking up a minimum of space and taking full advantage of the many different models of ultra-reliable Sabroe reciprocating compressors. ChillPAC chillers are ideal in installations where there is only limited space, and where there are restrictions on the refrigerant charge used.
Range
There are 15 different models in the standard ChillPAC range, with capacities ranging from 100 kW to 1400 kW.
ChillPAC 108
Advantages
Factory-assembled, pre-tested packaged units
Benefits
Easy pre-commissioning makes installation and running-in both faster and cheaper. Factory acceptance tests (FAT) available as an option Major savings on both weight and space, resulting in lower installation costs. Much less need for expensive separate machinery rooms Greater safety and outstanding reliability
Optional equipment
ariable-speed drive V Soft-starter or Y/D starter De-superheater Sub-cooler External condenser Control panel mounted separately
Exceptionally compact design and fully integrated configuration results in less than half the footprint of bespoke chiller designs Indirect cooling and uncomplicated flooded evaporating system, using natural ammonia (R717) only Exceptional COP and outstanding part-load performance Refrigerant charge 50% smaller than with conventional chillers, because of special condenser/evaporator design
Greater cooling effect from a smaller refrigerant charge Higher output per unit kW/kg refrigerant, lower unit cost and lower installation costs
Water chillers (Water: inlet 12C, outlet 7C) Type Cooling capacity kW CPAC 104 S-A CPAC 104 L-A CPAC 106 S-A CPAC 104 E-A CPAC 106 L-A CPAC 108 S-A CPAC 106 E-A CPAC 108 L-A CPAC 112 S-A CPAC 108 E-A CPAC 112 L-A CPAC 116 S-A CPAC 112 E-A CPAC 116 L-A CPAC 116 E-A 233 294 346 357 440 464 536 588 690 715 878 921 1066 1167 1398 kW 45 55 75 75 90 90 110 110 132 132 160 200 200 250 315 kg 14 15 17 17 21 22 24 26 29 30 36 37 41 45 49 kg 2301 2410 2727 2652 2950 3060 3225 3526 4315 3880 4738 5044 5196 5556 5878 L 2900 2900 2900 2900 2900 2900 3100 3100 4000 3300 4500 4500 4600 4700 5000 W 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 H 2000 2000 2000 2000 2000 2000 2000 2000 2200 2000 2200 2200 2200 2200 2200 E-motor R717 charge Dry weight Dimensions in mm Sound level dB(A) 78 79 79 79 80 80 81 82 82 82 83 83 83 83 84
Compressors
Chillers
Brine chillers (Ethylene glycol 30%: inlet -4C, outlet -8C) Type Cooling capacity kW CPAC 104 S-C CPAC 104 L-C CPAC 106 S-C CPAC 104 E-C CPAC 106 L-C CPAC 108 S-C CPAC 106 E-C CPAC 108 L-C CPAC 112 S-C CPAC 108 E-C CPAC 112 L-C CPAC 116 S-C CPAC 112 E-C CPAC 116 L-C CPAC 116 E-C 116 150 172 185 222 227 272 295 339 363 440 450 544 586 718 kW 37 55 55 75 75 75 90 110 110 132 160 160 200 200 250 kg 13 15 15 17 18 18 20 22 24 25 29 29 35 37 43 kg 2253 2378 2505 2586 2701 2766 2866 3091 3696 3523 4290 4390 4733 4898 5322 L 2700 2900 2900 2900 2900 2900 2900 3100 3800 3300 4200 4200 4300 4300 4300 W 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 H 2000 2000 2000 2000 2000 2000 2000 2000 2200 2000 2200 2200 2200 2200 2200 E-motor R717 charge Dry weight Dimensions in mm Sound level dB(A) 78 79 79 79 80 80 80 82 82 82 83 83 83 83 83
Condenser: water inlet 30C, outlet 35C Motor: 3 x 400V, 50 Hz, 1460 rpm The above data are only valid for the stated temperatures and operating conditions.
Capacities are nominal. Sound pressure levels in free field. All sound measuring has been carried out according to ISO 9614-2 at a distance of 1 m.
Compliance
All Sabroe chiller units are fully compliant with appropriate major international design codes and the specifications laid down by the most common classification societies. Approval in accordance with other technical requirements, specific national legislation or other classification societies requirements is available on request.
41
Compressors
Sabroe CAFP freezer systems are based on a cascade system that combines the advantages of CO2 on the low-temperature side and ammonia on the hightemperature side. These packaged systems are built around Sabroe reciprocating compressors that use CO2 as refrigerant, which gives them a significantly greater cooling capacity than corresponding compressors using ammonia. This in turn makes the lowtemperature compressor much smaller, and the whole package significantly more compact than traditional two-stage ammonia-based freezer systems. As a result, each standard CAFP package can be fitted inside a standard 20-foot shipping container, if required. This does away with the need for a special machinery space, and the freezer installation can easily be moved if required. Compared with conventional ammonia-based two-stage or single-stage systems with economisers, a CAFP unit uses significantly less power in the temperature range down to 55C. This results in energy savings of as much as 15% compared with traditional two-stage ammonia systems, and up to 45% compared with single-stage set-ups.
Advantages
Compact design that fits inside a standard 20-foot container High COP and extremely low power consumption, even at part load Use of CO2 as low-temperature refrigerant reduces piping complexity and costs Very small ammonia charge, located on the unit itself
Benefits
Big savings on installation costs
Range
There are 6 standard models in this range of freezer systems, with capacities ranging from 87 kW to 793 kW. All CAFP units are operationally tested with refrigerant before dispatch. Factory acceptance tests (FAT) available as an option
No risk of ammonia leaks in production areas, cold stores and working areas Low operating costs
Compressors
Model C CAFP 80 CAFP 80 CAFP 80 CAFP 80 CAFP 120 CAFP 120 CAFP 120 CAFP 120 CAFP 160 CAFP 160 CAFP 160 CAFP 160 CAFP 200 CAFP 200 CAFP 200 CAFP 200 CAFP 300 CAFP 300 CAFP 300 CAFP 300 CAFP 400 CAFP 400 CAFP 400 CAFP 400 -50 -45 -40 -35 -50 -45 -40 -35 -50 -45 -40 -35 -50 -45 -40 -35 -50 -45 -40 -35 -50 -45 -40 -35 All information is subject to change without notice.
Standard equipment
ouble control panel including D Unisab III systems controller CO2 pump separator including two pumps (one standby). Shell-and-tube cascade cooler with double-tube sheet to minimise any risk of CO2 and ammonia mixing. Standstill cooling unit, with separate control panel and power supply, to limit CO2 pressure. Automatic oil recovery system in both circuits. Water-cooled condenser (plate heat exchanger type) on ammonia side. Insulation of all cold parts.
Optional equipment
ariable-speed drive. V Titanium plates in condenser. Oversized CO2 pump separator for high CO2 evaporator volume. Oversized CO2 pumps for higher circulation rate. Oversized ammonia condenser for higher cooling water temperature. Fully welded shell-and-tube cascade cooler. External interstage load, including a brine cooler on the R717 side of the cascade cooler. Special version for use with remote condenser. Configurations for use with HCFC refrigerants instead of ammonia.
Compliance
All Sabroe chiller units are fully compliant with appropriate major international design codes and the specifications laid down by the most common classification societies. Approval in accordance with other technical requirements, specific national legislation or other classification societies requirements is available on request.
Chillers
Evaporation temperature
Capacity kW 87 112 144 144 131 169 217 264 174 223 288 363 211 277 353 415 324 416 511 599 421 520 667 793
Power consumption kW 64 74 84 82 94 110 126 137 125 147 167 188 150 177 200 214 228 263 290 310 296 332 375 398
Compressors R744/R717 HPO24 / SMC104S HPO24 / SMC104L HPO24 / SMC104E HPO24 / SMC106S HPO26 / SMC106S HPO26 / SMC106L HPO26 / SMC106E HPO26 / SMC108L HPO28 / SMC108S HPO28 / SMC108L HPO28 / SMC108E HPO28 / SMC112L HPC104 / SMC106E HPC104 / SMC108E HPC104 / SMC112L HPC104 / SMC112L HPC106 / SMC112L HPC106 / SMC112E HPC106 / SMC116L HPC106 / SMC116L HPC108 / SMC112E HPC108 / SMC116L HPC108 / SMC116E HPC108 / SMC116E
NH3 charge approx. kg 45 45 45 45 55 55 55 55 60 60 60 60 80 80 80 80 120 120 120 120 155 155 155 155
Max. CO2 charge l 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 1650 1650 1650 1650 1650 1650 1650 1650
Dimensions in mm LxWxH 5200 x 2600 x 2800 5200 x 2600 x 2800 5200 x 2600 x 2800 5200 x 2600 x 2800 5200 x 2600 x 2800 5200 x 2600 x 2800 5200 x 2600 x 2800 5200 x 2600 x 2800 5200 x 2600 x 2800 5200 x 2600 x 2800 5200 x 2600 x 2800 5900 x 2800 x 3000 5200 x 2600 x 2800 5200 x 2600 x 2800 5900 x 2800 x 3000 5900 x 2800 x 3000 6300 x 3200 x 3100 6300 x 3200 x 3100 6300 x 3200 x 3100 6300 x 3200 x 3100 6300 x 3200 x 3100 6300 x 3200 x 3100 6700 x 3200 x 3200 6700 x 3200 x 3200
Weight kg 8000 8500 9000 9000 9500 9500 9500 10000 10500 11000 11000 12000 12000 12000 13500 13500 14000 14000 15000 15500 16000 17000 17000 18000
Capacity is based on 50 Hz. In addition, 25C/30C cooling water to/from condenser. Power consumption applies to compressors only. Dry weight (approx.).
Sound pressure levels in free field. All sound measuring has been carried out according to ISO 9614-2 at a distance of 1 m.
43
Compressors
The SABlight air-cooled chiller is a particularly compact design that uses V-coil condensers to substantially reduce the overall footprint. The screw compressor and fully welded plate heat exchanger are mounted underneath the V-coils, resulting in a height of 2.9 m and a width of only 1.3 m. SABlight units provide a cost-effective alternative to traditional air conditioning, chilled rooms and industrial/process refrigeration. They are designed for quiet running and outdoor operation, and a special ultralow-noise version is available on request. SABlight uses a small propane refrigerant charge, providing an attractive, economical and environmentally responsible alternative to air-cooled chillers that use HFCs as refrigerant.
Range
There are 6 standard models in this range of air-cooled chillers, with capacities ranging from 95 kW to 400 kW.
SABlight air-cooled chiller
Advantages
Compact design with small footprint
Benefits
Easy to mount outdoors no special machinery room required Can be placed close to occupied buildings
Quiet while running Available in both low and ultra-low noise versions
Variable-speed drive fitted to both Low power consumption, which compressor and fans, providing very means low operating costs high coefficient of performance (COP), even under part-load conditions Designed for maximum safety, with very small natural refrigerant charge (propane R290) Easy to mount, install and connect up No expenditure on special safety precautions
Compressors
SABlight air-cooled chiller Technical data Type SABlight A95-1 SABlight A95-2 SABlight A140-1 SABlight A140-2 SABlight A200-1 SABlight A200-2 SABlight A260-1 SABlight A260-2 SABlight A340-1 SABlight A340-2 SABlight A400-1 SABlight A400-2 All information is subject to change without notice.
Standard equipment
ontrol and monitoring system C Variable-speed drive Hot-dip galvanised base frame Screw compressor
Optional equipment
xternal communication via E network and industrial-standard bus systems Evaporator heating elements for frost-proofing Epoxy coating of condenser surface
Compliance
All SABlight air-cooled chillers are fully compliant with PED (CE marked and PED approved). Approval in accordance with other classification societies is available on request.
Chillers
Cooling capacity kW 129 128 180 188 237 238 297 301 350 346 432 428
COP Eseer 4.6 4.6 5.0 5.1 5.0 4.9 5.1 5.2 5.0 5.0 5.3 5.3
COP IPLV 5.3 5.3 5.4 5.7 5.4 5.5 5.5 5.6 5.5 5.5 5.7 5.7
R290 charge kg 20 20 24 24 24 32 32 40 40 48 48 56
Dry weight kg 1900 1900 1950 2200 2500 3000 3000 3300 3700 4200 4400 4800 L 3860 3860 5260 5260 5260 6660 6660 8060 8060 9460 9460 10860
Dimensions in mm W 1250 1250 1250 1250 1250 1250 1250 1250 1250 1250 1250 1250 H 2835 2835 2835 2835 2835 2835 2835 2835 2835 2915 2915 2915
Nominal load current A 95 95 110 115 155 160 190 190 215 220 250 250
Capacity data are based on water temperature 12/7C, ambient temperature 30C. Two or more units can be built together if larger capacities are required.
Eseer = European Seasonal Energy Efficiency Ratio (Eurovent Institute, Europe). IPLV according to ARI, Air-conditioning and Refrigeration Institute standard (USA). Fans and VSD are included in the power consumption.
45
Ammonia as refrigerant
Sabroe industrial heat pumps use natural ammonia (R717) as refrigerant. Each unit is customised for the specific use and the particular installation, making sure that a minimum of thermal energy is used to provide maximum effect.
46
Capacity in kW
HPAC 157 HR HPAC 108-W HPAC 106-W HPAC 104-W HPAC 28-W HPAC 26-W HPAC 24-W NSPAC 355 L-A 10 100 1000 NSPAC 283 X-A NSPAC 355 S-A NSPAC 283 E-A NSPAC 283 L-A CAFP 400 CAFP 300 CAFP 200 CAFP 160 CAFP 120 CAFP 80 PAC 283 S-A PAC 233 E-A PAC 233 L-A PAC 233 S-A PAC 193 L-A PAC 151 E-A PAC 193 S-A PAC 151 L-A PAC 151 M-A PAC 151 S-A PAC 120 E-A PAC 120 L-A PAC 120 M-A PAC 120 S-A PAC 116 E-A PAC 116 L-A PAC 112 E-A PAC 116 S-A PAC 112 L-A PAC 108 E-A PAC 112 S-A PAC 108 L-A PAC 106 E-A PAC 108 S-A PAC 106 L-A PAC 104 E-A PAC 106 S-A PAC 104 L-A PAC 104 S-A NSPAC 38-A NSPAC 28-A NSPAC 36-A NSPAC 26-A NSPAC 34-A NSPAC 24-A CPAC 116E-A CPAC 116L-A CPAC 112E-A CPAC 116S-A CPAC 112L-A CPAC 108E-A CPAC 112S-A CPAC 108L-A CPAC 106E-A CPAC 108S-A CPAC 106L-A CPAC 104E-A CPAC 106S-A CPAC 104L-A CPAC 104S-A SABlight 400 SABlight 340 SABlight 260 SABlight 200 SABlight 140 SABlight 95 10 100 1.000 10.000
47
Heat pumps
Compressors
48
Range
There are 6 standard models in this range of heat pump systems, with capacities ranging from 202 kW to 1149 kW.
HeatPAC 108
Advantages
Factory-assembled, pre-tested packaged units based on Sabroe reciprocating compressors worldrenowned for their reliability Integrated configuration weighs less, and has less than half the footprint of bespoke heat pump designs Indirect cooling and an uncomplicated flooded evaporating system, using natural ammonia (R717) only Exceptional COP and outstanding part-load performance Refrigerant charge 50% smaller than with conventional heat pumps, because of special condenser/ evaporator design
Benefits
Easy pre-commissioning makes installation and running-in both faster and cheaper. Factory acceptance tests (FAT) available as an option Low installation costs. Easy to mount even in confined spaces or unconventional locations Greater safety and outstanding reliability
Higher output per unit kW/kg refrigerant, lower unit cost and lower installation costs
Optional equipment
abroe HeatPAC heat pumps S provide considerable scope for customisation to meet specific customer requirements.
Compliance
All HeatPAC heat pumps are fully compliant with appropriate major international design codes and the specifications laid down by the most common classification societies. Approval in accordance with other technical requirements, specific national legislation or other classification societies requirements is available on request.
Heat pumps
Condenser water inlet +64C, outlet +70C Evaporator water inlet +39C, outlet +34C Type Heating capacity kW 240 359 484 570 852 1149 Cooling capacity kW 202 302 408 478 715 965 Power consumption kW 38 57 77 93 138 186 Motor size kW 45 75 90 110 160 250 R717 charge kg 20 23 25 28 37 48 Dry weight kg 2020 2230 2420 2630 3300 3950 L 2800 2850 2900 3050 3750 4050 Dimensions in mm W 1000 1000 1000 1000 1000 1000 H 2000 2000 2000 2000 2000 2000 Sound level dB(A) 75 76 77 81 82 83
HPAC 24-W HPAC 26-W HPAC 28-W HPAC 104-W HPAC 106-W HPAC 108-W
W = Heat pump unit water/water. Motor: 3 x 400V / 50Hz, 1470 rpm. COP ratio average = heating capacity / power consumption = 6.2. Capacities are nominal values.
Sound pressure levels in free field. All sound measuring has been carried out according to ISO 9614-2 at a distance of 1 m. All data are only valid for operating conditions as stated.
49
Compressors
Heat pumps
HeatPAC 157 HR
Advantages
Factory-assembled, pre-tested packaged units based on Sabroe screw compressors world-renowned for their reliability . Integrated configuration weighs less, and has less than half the footprint of bespoke heat pump designs Indirect cooling and an uncomplicated flooded evaporating system, using natural ammonia (R717) only Exceptional COP and outstanding part-load performance Refrigerant charge 50% smaller than with conventional heat pumps, because of special condenser/ evaporator design
Benefits
Easy pre-commissioning makes installation and running-in both faster and cheaper. Factory acceptance tests (FAT) available as an option Low installation costs. Easy to mount even in confined spaces or unconventional locations Greater safety and outstanding reliability
Higher output per unit kW/kg refrigerant, lower unit cost and lower installation costs
50
Optional equipment
Sabroe HeatPAC heat pumps provide considerable scope for customisation to meet specific customer requirements.
Compliance
All HeatPAC heat pumps are fully compliant with appropriate major international design codes and the specifications laid down by the most common classification societies. Approval in accordance with other technical requirements, specific national legislation or other classification societies requirements is available on request.
>>
Traditional process plant
Water/water condenser heat recovery
Electric power
Hightemperature water
>>
Traditional process plant
Ammonia/water condenser heat recovery
Heat pumps
Electric power
Hightemperature water
The HeatPAC 157-HR is a versatile heat pump that can cope with a wide range of oper ating conditions. These units are particularly efficient under part-load conditions due to the variable speed drive (10006000 rpm) fitted as standard. Each unit is specially configured to comply with the specific set of operating conditions, in order to ensure the most effective exploitation of the waste heat available. Specific capacity must be calculated for actual running conditions. Heating capacity 1600 kW at 40C heat source and 85C water out.
Approximate dimensions Type R717 charge kg HeatPAC 157 HR ~150 Dry weight kg ~9500 L ~6500 Dimensions in mm W ~2500 H ~2700
51
Johnson Controls Denmark ApS Sabroe Factory Christian Xs Vej 201 . 8270 Hjbjerg Denmark Phone +45 87 36 70 00 Fax +45 87 36 70 05 www.sabroe.com
PUBL-7034ENG 02.2013-2