You are on page 1of 2

PLC1-D AC CONTACTOR

AC CONTACTOR
SPECIFICATIONS

Type of contactor

PLC1-

D09...D18

D25...D38

D40

D50...D95 D115...D150

Conforming to IEC 947-4-1, Rated insulation voltage overvoltage category , (Ui) degree for pollution: 3

690V

690V

1000V

1000V

1000V

Rated impulse withstand Conforming to IEC 947 voltage (Uimp) PLC1-D 09/12/18 Conforming to standards Power connection Degree of protection (1) (front face only) protective treatment Coil connection Conforming to IEC 68 Storage

6KV

6KV

8KV

8KV

8KV

IEC 60947-1, 60947-4-1, EN 60947-1, EN 60947-4-1 Protection against direct finger contact IP 2X Protection against direct finger contact IP 2X (except CKYC1-D40...D80) TH -60...+80 -5...+60 -40...+70 ,for operation at Uc

Ambient air temperature Operation around the device Permissible

Maximum operating Without derating altitude Operating position Flame resistance Shock resistance (2) PLC1-D 25/32 1 / 2 sine wave = 11ms Vibration resistance (2) 5...300 Hz Without derating 30o possible, in relation to normal vertical mounting plane 3000m

Conforming to IEC 695-2-1 960 Contactor open Contactor closed Contactor open Contactor closed 10 gn 15 gn 2 gn 4 gn 8 gn 15 gn 2 gn 4 gn 8 gn 10 gn 2 gn 4 gn 8 gn 10 gn 2 gn 3 gn 6 gn 15 gn 2 gn 4 gn

(1) Protection ensured for the connection cross-sections shown on the next page and for connection via cable. (2) In the least favourable direction, without change of contact state (coil supplied at Ue)

B A-01

PLC1-D AC CONTACTOR
AC CONTACTOR

SPECIFICATIONS
Type of contactor PC1D09 & D12 D18 DT20 & (3P) T25

D25 D23 D38 D40

D50 & D80 & D65 D95

D115 & D150


2-input connector 10...120 10...120+10...50 10...120 10...120+10...50 10...120 10...120+10...50 -

Tightening
Flexible cable 1 conductor

Screw clamps mm 2 mm 2 mm 2 mm 2 mm mm
2

Screw clamps

1-input connector

1...4 1...4 1...4 1...2.5 1...4 1...4 N 2 6 o

1.5...6 1.5...10 2.5...10 2.5...25 2.5...25 4...50 1.5...6 1.5...6 1...6 1...4 1...6 1...4 2.5...10 2.5...16 2.5...16 4...25 1...10 2.5...25 2.5...25 4...50

Without cable end 2 conductors Flexible cable With cable end 1 conductor 2 conductors 1conductor

1.5...6 2.5...10 2.5...10 4...16 1.5...10 2.5...25 2.5...25 4...50 1.5...10 2.5...16 2.5...16 4...25 No 2 6 2.5 5 -

PLC1-D 40/50/65

Solid cable

1.5...6 1.5...6 1.5...6 1.5...6 No 2 No 2 6 1.7 2.5 6

Without cable end 2 conductors Screwdriver Head flat screw/driver 6 sided key Tightening torque

6... 8 6... 8 6... 8 5 4 9 4 12

N.m

1.7

CONNECTION VIA SPRING TERMINALS (2)


Flexibl cable 1 conductor without cable end 2 conductors mm 2 mm 2 2.5 (4: DT25) 4 4 4 -

2.5(except 4 DT25: -)

CONNECTION VIA BARS OR LUGS


PLC1-D 80/95 Bar cross-section Lug external of screw Screw/driver Head flat screwdriver Key for hexagonal headed screw Tightening torque N.m 1.7 mm mm 8 8 10 10 13 M5 16 3x16 17 5x25 25 M8 8 10 9 13 12

M3.5 M3.5 M4 M4 N2 6 1.7


o

M6 M6

No2 6

No2 No2 6 6

No2 No2 6 5 5 8

2.5 2.5

B A-02

You might also like