Professional Documents
Culture Documents
com
www.jwjobs.net
Code No: 57024 Set No. 1 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD IV B.Tech. I Sem., I Mid-Term Examinations, August- 2012 CAD CAM Objective Exam Name: ______________________________ Hall Ticket No. A Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10. I. 1. Choose the correct alternative: The heart of a computer is: a) CPU b) ALU [ c) Monitor d) Keyboard [ ] ]
2.
Raster CRT eliminates....... a) Flicker and slow update b) ficker displays c) slow update only d) has no effect The degree of the Bezier curve with n control points is: a) n+1 b) n-1 c)n d) 2n After creating a CAD model, we often need a hard copy, using. a) output device b) Input devices c) CAM d) FEM Manufacturing software is usually called........ a) CAD b) CAM c) CAPP d) CADD
3.
4.
5.
6.
Which of the following is not an analytical entity? a) Line b) circle c) spline d) parabola A display of a volume model that shows all of its edges is called a....... a) 3-D model b) surface modelling c) wire-frame d) solid model
7.
8.
Technique, which enables the designer to mould and shape, rather than construct an object using a series of line is ...... [ ] a) solid modelling b) surface modelling c) wire-frame modelling d) FEM Rapid prototyping is used to generate the product directly from the a) 3D CAD model b) 2D CAD model c) 1D CAD systems d) None of these [ ]
T N
W U
R O
D L
9.
10.
The measurement, properties, and relationships of the lines and points of an object that make up its ......... [ ] a) Geometry b) shape c) system d) layout
Cont..2
www.jntuworld.com
www.jntuworld.com
www.jwjobs.net
:2:
Set No. 1
__________is the process of developing a mathematical, wireframe representation of any threedimensional object. Parametric representation is the most general way to specify a _______________ ________Serves as a tool to document a design and communicate it to the design and manufacturing departments. Write the application of solid models__________ The degrees of freedom of a two-node bar element are ___________ The Bezier surface is defined by m+1________of control points. Ink jet printer is a_____________ device.
12. 13.
The linear sweep is divided into the ___________ and ____________ Two dimensional representations is used for a ___________
T N
W U
-oOo-
R O
D L
www.jntuworld.com
www.jntuworld.com
www.jwjobs.net
Code No: 57024 Set No. 2 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD IV B.Tech. I Sem., I Mid-Term Examinations, August- 2012 CAD CAM Objective Exam Name: ______________________________ Hall Ticket No. A Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10. I. 1. Choose the correct alternative: After creating a CAD model, we often need a hard copy, using. a) output device b) Input devices c) CAM d) FEM Manufacturing software is usually called........ a) CAD b) CAM c) CAPP d) CADD Which of the following is not an analytical entity? a) Line b) circle c) spline d) parabola [ ]
2.
3.
4.
A display of a volume model that shows all of its edges is called a....... a) 3-D model b) surface modelling c) wire-frame d) solid model
5.
Technique, which enables the designer to mould and shape, rather than construct an object using a series of line is ...... [ ] a) solid modelling b) surface modelling c) wire-frame modelling d) FEM Rapid prototyping is used to generate the product directly from the a) 3D CAD model b) 2D CAD model c) 1D CAD systems d) None of these
6.
7.
8.
The measurement, properties, and relationships of the lines and points of an object that make up its ......... [ ] a) Geometry b) shape c) system d) layout The heart of a computer is: [ ] a) CPU b) ALU c) Monitor d) Keyboard
T N
W U
R O
D L
9.
Raster CRT eliminates....... a) Flicker and slow update b) ficker displays c) slow update only d) has no effect The degree of the Bezier curve with n control points is: a) n+1 b) n-1 c)n d) 2n
10.
Cont..2
www.jntuworld.com
www.jntuworld.com
www.jwjobs.net
Code No: 57024 II 11. 12. 13. 14. 15. 16. 17. 18. Fill in the Blanks: Write the application of solid models__________
:2:
Set No. 2
The degrees of freedom of a two-node bar element are ___________ The Bezier surface is defined by m+1________of control points. Ink jet printer is a_____________ device. The linear sweep is divided into the ___________ and ____________ Two dimensional representations is used for a ___________ B-Splines can be regarded a generalization of ____________
__________is the process of developing a mathematical, wireframe representation of any threedimensional object. Parametric representation is the most general way to specify a _______________ ________Serves as a tool to document a design and communicate it to the design and manufacturing departments.
19. 20.
T N
W U
-oOo-
R O
D L
www.jntuworld.com
www.jntuworld.com
www.jwjobs.net
Code No: 57024 Set No. 3 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD IV B.Tech. I Sem., I Mid-Term Examinations, August- 2012 CAD CAM Objective Exam Name: ______________________________ Hall Ticket No. A Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10. I. 1. Choose the correct alternative: Which of the following is not an analytical entity? a) Line b) circle c) spline d) parabola A display of a volume model that shows all of its edges is called a....... a) 3-D model b) surface modelling c) wire-frame d) solid model [ ]
2.
3.
Technique, which enables the designer to mould and shape, rather than construct an object using a series of line is ...... [ ] a) solid modelling b) surface modelling c) wire-frame modelling d) FEM Rapid prototyping is used to generate the product directly from the a) 3D CAD model b) 2D CAD model c) 1D CAD systems d) None of these
4.
5.
The measurement, properties, and relationships of the lines and points of an object that make up its ......... [ ] a) Geometry b) shape c) system d) layout The heart of a computer is: a) CPU b) ALU
6.
7.
Raster CRT eliminates....... a) Flicker and slow update b) ficker displays c) slow update only d) has no effect The degree of the Bezier curve with n control points is: a) n+1 b) n-1 c)n d) 2n After creating a CAD model, we often need a hard copy, using. a) output device b) Input devices c) CAM d) FEM Manufacturing software is usually called........ a) CAD b) CAM c) CAPP d) CADD
8.
T N
W U
c) Monitor
R O
D L
d) Keyboard [ ]
9.
10.
Cont..2
www.jntuworld.com
www.jntuworld.com
www.jwjobs.net
Code No: 57024 II 11. 12. 13. 14. 15. 16. Fill in the Blanks:
:2:
Set No. 3
The Bezier surface is defined by m+1________of control points. Ink jet printer is a_____________ device. The linear sweep is divided into the ___________ and ____________ Two dimensional representations is used for a ___________ B-Splines can be regarded a generalization of ____________ __________is the process of developing a mathematical, wireframe representation of any threedimensional object. Parametric representation is the most general way to specify a _______________
17. 18.
________Serves as a tool to document a design and communicate it to the design and manufacturing departments. Write the application of solid models__________
19. 20.
T N
W U
-oOo-
R O
D L
www.jntuworld.com
www.jntuworld.com
www.jwjobs.net
Code No: 57024 Set No. 4 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD IV B.Tech. I Sem., I Mid-Term Examinations, August- 2012 CAD CAM Objective Exam Name: ______________________________ Hall Ticket No. A Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10. I. 1. Choose the correct alternative: Technique, which enables the designer to mould and shape, rather than construct an object using a series of line is ...... [ ] a) solid modelling b) surface modelling c) wire-frame modelling d) FEM Rapid prototyping is used to generate the product directly from the a) 3D CAD model b) 2D CAD model c) 1D CAD systems d) None of these
2.
3.
The measurement, properties, and relationships of the lines and points of an object that make up its ......... [ ] a) Geometry b) shape c) system d) layout The heart of a computer is: a) CPU b) ALU
4.
5.
Raster CRT eliminates....... a) Flicker and slow update b) ficker displays c) slow update only d) has no effect The degree of the Bezier curve with n control points is: a) n+1 b) n-1 c)n d) 2n After creating a CAD model, we often need a hard copy, using. a) output device b) Input devices c) CAM d) FEM Manufacturing software is usually called........ a) CAD b) CAM c) CAPP d) CADD Which of the following is not an analytical entity? a) Line b) circle c) spline d) parabola A display of a volume model that shows all of its edges is called a....... a) 3-D model b) surface modelling c) wire-frame d) solid model
6.
7.
8.
T N
W U
c) Monitor
d) Keyboard
R O
D L
9.
10.
Cont..2
www.jntuworld.com
www.jntuworld.com
www.jwjobs.net
Code No: 57024 II 11. 12. 13. 14. Fill in the Blanks:
:2:
Set No. 4
The linear sweep is divided into the ___________ and ____________ Two dimensional representations is used for a ___________ B-Splines can be regarded a generalization of ____________ __________is the process of developing a mathematical, wireframe representation of any threedimensional object. Parametric representation is the most general way to specify a _______________
15. 16.
________Serves as a tool to document a design and communicate it to the design and manufacturing departments. Write the application of solid models__________
The degrees of freedom of a two-node bar element are ___________ The Bezier surface is defined by m+1________of control points. Ink jet printer is a_____________ device.
T N
W U
-oOo-
R O
D L
www.jntuworld.com