Professional Documents
Culture Documents
HUAWEI
www.huawei.com
The module in Quidway routers to manage backup function Network reliability and usability can be improved by using backup center Use backup center to provide backup for a router interface
www.huawei.com
Can provide backup interface for any interface on a router (except dialer interface) Any interface on a router can be taken as the backup interface of other interfaces (or logic channels) Can provide backup to a certain logic channel on a interface. The backup interface can be an interface and can also be a certain logic channel on the interface (the logic channel referred here can be the virtual circuit of X.25 and frame relay, and can also be a certain dialer map of a dialer interface) For a main interface, can provide it with many backup interfaces. When a fault happens to the main interface, these backup interfaces can decide a usage sequence according to their priorities For an interface with many logic channels (such as BRI and PRI interfaces), can provide backup for several main interfaces.
www.huawei.com
E n ter into the configuration m odeofam a inin terfacethatusesbackupfunction Specifythebackupinterfaceanditspriorityusedbythem a inin terface C o n figureswitchoverconditionbetweenm a inandbackupin terfaces (optional) Setstate-judgingconditionswhenthemaininterfaceisalogicchannel(optional) Setstate-judgingconditionswhenthebackupinterfaceisalogicchannel(optional) C o n figureroutesform a inandbackupin terfaces.Nom a tterusingdynam ic route or static route, th em a inandbackupin terfacesallneedtohavearoutetoreachdestinationnetwork
www.huawei.com
The main interface is a physical interface interface interface-type interface-number The main interface is a logic channel x25 map protocol address x.121-address [ lin logic-channel-number ] frame-relay map protocol address dlci [ lin logic-channel-number ] dialer map protocol next-hop-address dialer-string [ lin logic-channel-number ] logic-channel logic-channel-number
www.huawei.com
Specifyalogicchanneltobackupamaininterface,andsetitspriority
backup logic-channel number [ priority ]
Establishacorrespondingrelationbetweenvirtualcircuitandlogicchannel SpecifyalogicchannelnumberforX.25virtualcircuit
x25 map protocol address x.121-address [ lin logic-channel-number ]
Specify alogicchannelnumberfordialerm a p
dialer map protocol next-hop-address dialer-string [ lin logic-channel-number ]
www.huawei.com
HUAWEI
Setting delay time for switchover between main and backup interfaces
backup delay { enable-delay }{ disable-delay }
Note: this command only applies to the situation when the main interface is a physical interface!
www.huawei.com
HUAWEI
backup state-down n u m b e r
A ftersystems w itchestobackupinterface,interval-tim eis set to makeregularinspectionssoasto checkwhethertheoriginallogicalchannelhasrecoveredits"up"state.
www.huawei.com
PSTN
Quidway 2501
IP 129.102.0.1
IP 129.102.0.2
Quidway 2501
www.huawei.com
IP 10.110.0.1
IP 10.110.0.2
PPP
Quidway 2501 1000 IP 129.102.0.1 2000 Quidway 2501
x.25
IP 129.102.0.2
www.huawei.com
Summary
HUAWEI
Grasp the concept and principle (the switchover process between main and backup interfaces) of backup center. Grasp backup center function (to know which interfaces can participate in backup). Grasp backup configuration commands, and distinguish differences between physical interface and logic interface.
www.huawei.com