Professional Documents
Culture Documents
16mm - A6 Series
A2
Switches & Pilot Devices
Degree of Protection Contact Configuration Maximum Voltage Thermal Current Minimum Applicable Load Contact Material Terminal Style Operating Temperature Operating Humidity Contact Resistance Insulation Resistance Vibration Resistance Shock Resistance Electrical Life Mechanical Life
IP40: Dustproof IP65 Waterproof/Oiltight/Corrosion Resistant SPDT, DPDT 250V AC/DC 3A 5V AC/DC, 1mA (subject to operating conditions) Gold-clad silver .110" Solder/ Quick Connect LED Type: -25 to +55C (no freezing) 45 to 85% RH 50m maximum (initial value) 100M minimum (500V DC megger) 10 to 55Hz, amplitude 1.5mm p-p Damage limits: 500m/sec2 (approx. 50G) Operating extremes: 200m/sec2 (approx. 20G) 100,000 operations minimum (at full rated load) Maintained: 100,000 operations minimum Momentary: 1,000,000 operations minimum Selector/Keylock: 250,000 operations minimum Switch Unit: 2,000VAC, 1 min. between live/dead part and terminals of different poles; 1,000V AC, 1 minute between terminals of the same pole; 1,500V AC, 1 minute between contact and lamp terminals. Illumination Unit: 2,000VAC, 1 min. between live part/ground 20W/5 seconds or 260C/3 seconds
Specifications
Dielectric Strength Soldering Temperature Operating Voltage AC (50/60Hz) DC Resistive Inductive Resistive Inductive
24V
1.0A 0.7A 5V DC 5% 6V AC/DC (10%) DC: A, R, W, Y: 6mA G, S: 5mA AC: A, R, W, Y: 8mA G, S: 7mA
120V
1.0A 0.7A 0.2A 0.1A 12V AC/DC (10%) DC: 8mA AC: 9mA
240V
0.5A 0.5A 24V AC/DC (10%) DC: 8mA AC: 9mA
Rated Voltage/Current
8mA
1. 2. 3. 4.
AC Inductive Load, PF = 0.6 0.7; DC Inductive Load, L/R = 7ms. Minimum applicable load (reference value) is 5V AC/DC/1mA (applicable range is subject to the operating conditions and load). LED lamp contains a built-incurrent-limiting resistor and a protection diode. LEDs dont burn out. Luminance is reduced to 50% of initial intensity after being lit for 50,000 hours continuously.
www.idec.com
A2-17
16mm - A6 Series
Part Numbers: Non-Illuminated Pushbuttons Style Contact Part Number Momentary Maintained (Latching) Dustproof (IP40) Oiltight (IP65) Dustproof (IP40) Oiltight (IP65)
A2
Switches & Pilot Devices
Round 18mm SPDT DPDT AB6M-M1- AB6M-M2- AB6M-M1P- AB6M-M2P- AB6M-A1- AB6M-A2- AB6M-A1P- AB6M-A2P-
Standard Button
Square 18mm SPDT DPDT AB6Q-M1- AB6Q-M2- AB6Q-M1P- AB6Q-M2P- AB6Q-A1- AB6Q-A2- AB6Q-A1P- AB6Q-A2P-
Rectangular 18mm x 24mm SPDT DPDT AB6H-M1- AB6H-M2- AB6H-M1P- AB6H-M2P- AB6H-A1- AB6H-A2- AB6H-A1P- AB6H-A2P-
Color
Black Green
Code
B G R S W Y
Oversize Button
1. In place of , specify Button Color Code from the table at the right. 2. To order as sub-assembled, see page A2-19. 3. For accessories, see page A2-25. 4. For dimensions, see page A2-27.
Operation
Contact
Remarks
Shape
Voltage
12V DC
Part Number
UZ6-11 UZ6-12
A2-18
www.idec.com
16mm - A6 Series
Operator
Button
Completed Unit
A2
Switches & Pilot Devices
Operator
Momentary Maintained Momentary
Square
AB6Q-M100 AB6Q-A100 AB6Q-M200 AB6Q-A200
Rectangular
AB6H-M100 AB6H-A100 AB6H-M200 AB6H-A200
DPDT
Maintained
Square
AB6Q-BK1 AB6Q-BK2-
Rectangular
Button Color Code AB6H-BK1- AB6H-BK2-
Color
Black Green Red
Code
B G R S W Y
1. In place of , specify Button Color Code from table on right. 2. Buttons which are rated IP65 include a waterproof rubber gasket. 3. For accessories, see page A2-25.
www.idec.com
A2-19
16mm - A6 Series
A2
Switches & Pilot Devices
Description
Style
Round 18mm diameter
Voltage
Contact
Part Numbers Momentary Maintained (Latching) Dustproof (IP40) Oiltight (IP65) Dustproof (IP40) Oiltight (IP65)
SPDT DPDT
AL6M-M14- AL6M-M24-
AL6M-M14P- AL6M-M24P-
AL6M-A14- AL6M-A24-
AL6M-A14P- AL6M-A24P-
Square 18mm
Standard Lens
SPDT DPDT
AL6Q-M14- AL6Q-M24-
AL6Q-M14P- AL6Q-M24P-
AL6Q-A14- AL6Q-A24-
AL6Q-A14P- AL6Q-A24P-
Rectangular 18mm x 24mm 24V AC/DC 10% SPDT DPDT AL6H-M14- AL6H-M24- AL6H-M14P- AL6H-M24P- AL6H-A14- AL6H-A24- AL6H-A14P- AL6H-A24P-
Round 24mm diameter 24V AC/DC 10% SPDT DPDT AL6M-M14P-M AL6M-M24P-M AL6M-A14P-M AL6M-A24P-M
Oversize Lens
Square 24 mm 24V AC/DC 10% SPDT DPDT AL6Q-M14P-Q AL6Q-M24P-Q AL6Q-A14P-Q AL6Q-A24P-Q
Rectangular 18mm x 24mm 24V AC/DC 10% SPDT DPDT AL6Q-M14P-H AL6Q-M24P-H AL6Q-A14P-H AL6Q-A24P-H
1. In place of , specify Lens/LED Color Code from table below. 2. Lamps also available in 5V DC, 6V AC/DC or 12 V AC/DC, change 4 using voltage/lamp codes (ie AL6M-M13- uses 12V AC/DC LED). 3. LED lamp is included in unit and contains a current-limiting resistor and a protection diode. (External resistor not required.) 4. To order as sub-assembled, see page A2-21. 5. For accessories, see page A2-25. 6. For dimensions, see page A2-27.
Code
1 2 3 4
A2-20
www.idec.com
16mm - A6 Series
Operator
LED Lamp
Lens
Completed Unit
A2
Switches & Pilot Devices
Operator
Momentary Maintained Momentary
Square
AL6Q-M100 AL6Q-A100 AL6Q-M200 AL6Q-A200
Rectangular
AL6H-M100 AL6H-A100 AL6H-M200 AL6H-A200
DPDT
Maintained
Part Numbers: Lenses Unit Degree of Dustproof (IP40) Protection Size Standard AL6M-LK1-
Round
Oversize
AL6M-LK2-M
AL6Q-LK1-
AL6Q-LK2-
AL6Q-LK2-Q
Square
AL6H-LK1- Rectangular
AL6H-LK2-
AL6Q-LK2-H
1. In place of , specify Lens Color Code from table below. 2. Lenses which are rated IP65 include a waterproof rubber gasket. 3. For accessories, see page A2-25.
Part Number
LATD-5 LATD-6 LATD-1 LATD-2
www.idec.com
A2-21
16mm - A6 Series
Part Numbers: AS6 Selector Switches and Keylock Switches (2- & 3- Position)
Style 2-Position 90 Function Maintained Spring Return Right Maintained Round Keylock 3-Position 45 Spring Return Right Center Spring Return LeftCenter 2-Way ReturnCenter 2-Position 90 Square Selector Maintained Spring Return to Right Maintained 3-Position 45 Square Keylock Spring Return RightCenter Spring Return Left Center 2-Way ReturnCenter Rectangular Selector 2-Position 90 Maintained Spring Return Right Maintained 3-Position 45 Rectangular Keylock Spring Return Right Center Spring Return LeftCenter 2-Way ReturnCenter L R Selector Switches AS6M-2Y2P Keylock Switches AS6M-2KT2P
A2
Switches & Pilot Devices
Round Selector
Left L C R AS6M-21Y2P AS6M-21KT2PB 2-pos. (DPDT) Right AS6M-3Y2P AS6M-3KT2P Left AS6M-31Y2P AS6M-31KT2P 3-pos. (DPDT)
NO
NC
NO
NC
Left
Right
NO
NC
NO
NC
Left
Right
NO
NC
NO
NC
Left
Right
Center
NO
NC
NO
NC
AS6M-32Y2P
AS6M-32KT2P
Left
Right NO NC
Right
NO
NC
L L
R R
AS6M-33Y2P
Code
AS6Q-2Y2P AS6Q-2KT2P A L C R C R C R C R R R AS6Q-21Y2P AS6Q-21KT2PB AS6Q-3KT2P AS6Q-31KT2P B C L L AS6Q-3Y2P D E G L AS6Q-32Y2P AS6Q-32KT2P H AS6Q-33Y2P AS6Q-33KT2PD
Description
Key not retained in any position (removable in all positions) Key retained in right position only Key retained in left position only Key retained in left and right (3 position only) Key retained in center only (3 position only) Key retained right and center (3 position only) Key retained left and center (3 position only) 1. For more information on these options, contact your IDEC representative. 2. Key cannot be removed in a spring return position.
AS6Q-31Y2P
L L
AS6H-2Y2P
AS6H-2KT2P
L C
AS6H-21Y2P
AS6H-21KT2PB
R C R C R C R
AS6H-3Y2P
AS6H-3KT2P
AS6H-31Y2P
AS6H-31KT2P
AS6H-32Y2P
AS6H-32KT2P
AS6H-33Y2P
AS6H-33KT2PD
1. In place of , specify Key Retention Code. See table on right. 2. All models are IP65 and DPDT. 3. Available as assembled units only. 4. For accessories, see page A2-25. 5. For dimensions, see page A2-27.
A2-24
www.idec.com
16mm - A6 Series
Appearance Locking Ring Wrench Lens Removal Tool Lamp Holder Tool
Description
Made of metal. Used for tightening plastic locking ring during installation. Tightening torque should not exceed 3kgfcm
Used With
5/8" (16mm) units 31/64" (12mm) AP2M units 13/32" (10mm) AP1M units All pushbuttons and pilot lights
Part Number
MT-001 MT-002 MT-003 MT-101
A2
Switches & Pilot Devices
Made of metal. Used for removing lens or button from the housing
Made of rubber. Used for removing and replacing LED lamps in illuminated units Prevents inadvertent switch operation. IP40 dust-tight rated. 90 degrees opening maintained Prevents inadvertent switch operation. IP65 oiltight rated 180 degrees opening, spring return Made of translucent nylon. Fits over and shields the terminals
All illuminated pushbuttons and pilot lights Round/Square Rectangular Round/Square Rectangular
Switch Guard
Terminal Cover
AL-V6
Dust Cover
Fits over the lens or button to provide protection from dust. (not applicable for oversize lenses or buttons) Plug-on terminal adaptor with solder terminal
Adaptor Socket Plug-on terminal adaptor with PCB terminal Fills unused panel cutouts. Made of nitrile rubber. Push-in installation from front of panel. IP65 (oiltight) rated. Fills unused panel cutouts. Made of aluminum. Screw-on locking ring from inside of panel. IP65 (oiltight) rated. LED with built in current limiting resistor (with all illuminated assemblies).
All 5/8" (16mm) units AL-C6V Rubber Aluminum 5V DC 6V AC/DC 12V AC/DC 24V AC/DC All switches & pilot lights AL-B6 AL-BM6 LATD-5 LATD-6 LATD-1 LATD-2 HA9Z-LN
All switches & pilot lights Round standard Square standard Rectangular standard Round oversize Square/rectangular oversize
Engraving plates to allow legends underneath translucent lenses (included with all lenses).
Replacement Keys
Pair of keys (#132). All key switches use same standard key.
AS6-SK
1, In place of specify color code. A=Amber, W=White, G=Green, Y=Yellow, R=Red, S=Blue. 2. LEDs include built-in current limiting resistor and reverse polarity protection diode.
www.idec.com
A2-25
16mm - A6 Series
Terminal Arrangement
(Top View)
A2
Switches & Pilot Devices
NC NO
Illuminated Pushbuttons
NC NO COM
IDECs Superbright LED Internal Circuit LATD-1,-2,-6 (GS) LED Chip Protective Diode Zener Diode
LATD-5 (ARWY)
LATD-1,-2,-6 (ARWY)
LATD-5 (GS)
A2-26
www.idec.com
16mm - A6 Series
A2
Switches & Pilot Devices
1 8 22
0.6 9
24
18 9
5.7
6 8
1 22
0.6
9 15.5
23.5
0.6
9 15.5
23.5
0.6 12.5
23.5
1 8
18 18
1 8 22
8 15.5 24
17.5
Gasket Terminal Width 2.8 0.5t 2.5 3 Anti-Rotation Ring Locking Ring Panel Thickness: 0.5 to 6 mm Rectangular (TOP) Square (TOP) Round (TOP)
N C N O C 1 8 22 26 24 18 18
18
www.idec.com
A2-27
16mm - A6 Series
A2
Switches & Pilot Devices
24 33 Gasket 14 28
23.5
13
10.5
23.5 10.5
26.5 min.
13
26.5 min.
Gasket 14 28
34
18
24 33
R2 2
13
23.5
13
45.5 min.
Gasket 0.4 14 28
19 min.
25 min.
Terminal Sockets
AL-C6, 5/8" (16mm), Solder
Rubber Gasket Terminal Width 2.8 0.5t 2.5 3 Anti-rotation Ring Locking Ring Panel Thickness 0.5 to 6mm Rectangular (TOP)
Dust Covers
AL-D6, Round
0.936" (24)
17.5
AL-DQ6, Square
0.936" (24)
AL-DH6, Rectangular
1.17" (30)
0.293" (7.5)
6 6 8 1 22 0.6 9 15.5 23.5
Square (TOP)
Round (TOP)
0.012" (0.3)
0.012" (0.3)
23.5
23.5
0.6
9 15.5
0.6 12.5
Rectangular
0.632"+0.007 ( 16.2+0.2)
0.936" (24)
0.936" (24)
0.936" ( 24)
1.17" ( 30)
A2-28
www.idec.com
16mm - A6 Series
Marking Plates for Pushbuttons with Standard Size Lens Style RoundAL6M-W SquareAL6Q-W
a
RectangularAL6H-W
OD2
A2
Switches & Pilot Devices
Dimensions
Engraving must be made on the engraving area within 0.02" (0.5mm) deep.
Square/RectangularAL6Q-QW
Dimensions
Marking Area
5/8" (16mm)
Latches Recess
www.idec.com
A2-29