Professional Documents
Culture Documents
DOCUMENT CODE
PLAN/PRJ/SUB UNIT PHASE DISCIPLINE DOCUMENT TYPE SERIAL NO. REV. NO. NO. OF PAGES: 4 DATE
NIOEC
000
EG
IN
SP
7012
A1
DECEMBER 2009
THIS SPECIFICATION IS THE PROPERTY OF NATIONAL IRANIAN OIL ENGINEERING & CONSTRUCTION COMPANY. IT IS CONFIDENTIAL AND ALL RIGHTS RESERVED TO THE OWNER. NEITHER WHOLE NOR ANY PART OF THIS DOCUMENT MAY BE DISCLOSED TO ANY THIRD PARTY, REPRODUCTED, STORED IN ANY RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN CONSENT OF THE NATIONAL IRANIAN OIL ENGINEERING & CONSTRUCTION COMPANY
DECEMBER, 2009
NIOEC-SP-70-12(2)
DECEMBER, 2009
NIOEC-SP-70-12(2)
REVISION INDEX
REV. PAGE
REV. PAGE
REV. PAGE
REV. PAGE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 X X
26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
NOTES:
1) 2) 3) 4) THIS SHEET IS A RECORD OF ALL REVISIONS TO THIS SPECIFICATION. REMARKS RELATED TO EACH REVISION SHOW A BRIEF DESCRIPTION. THESE REMARKS SHALL BE INTERPRETED IN CONJUNCTION WITH THE REVISED TEXT MARKED BY REVISION NUMBERS. WHEN APPROVED EACH REVISION SHALL BE CONSIDERED AS A PART OF THE ORIGINAL DOCUMENT. NUMBER OF PAGES EXCLUDES THIS SHEET AND THE COVER SHEET.
5 4 3 2 1 0
KHATIB ORDOOBADI
M.R.FARZAM M.R.FARZAM
SAJEDI SAJEDI
REV.
DATE
PREPARED
CHECKED
APPROVED
AUTHORIZED
DECEMBER, 2009
NIOEC-SP-70-12(2)
CONTENTS:
PAGE NO.
DECEMBER, 2009
NIOEC-SP-70-12(2)
0- INTRODUCTION To satisfy the requirements of this NIOEC specification, Iranian Petroleum Standards IPS-C-IN-240, IPSE-IN-240 and IPS-M-IN-240, with the modifications as specified hereinafter shall be strictly followed. Articles 1 through 4 of this document replace entirely the related articles in the referenced IPS Standard. 1. SCOPE This specification defines NIOECS minimum requirements for metering equipment used in metering stations of volumetric liquid measurement Volumetric meters such as positive displacement meters, turbine meters and ancillary equipment such as provers are covered in this Standard. Deviations from this specification will only be permitted on obtaining written approval from NIOEC.
2. REFERENCES Throughout this specification the following dated and undated standards and codes are referred to. These referenced documents shall, to the extent specified herein, form a part of this specification. For undated references, the latest edition of the referenced document (including any supplements and amendments) applies. For dated references, the edition cited applies. The applicability of changes in the dated references that occur after the cited date shall be mutually agreed upon by NIOEC and the vendor /contractor. ANSI (AMERICAN NATIONAL STANDARD INSTITUTE) ANSI/ASME B 1.20.1 ANSI/ASME B 16.5 ANSI/ASME B 31.3 ANSI B 31.4 "Pipe Threads" "Steel Pipe Flanges and Flanged Fittings" "Process Piping" "Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids"
API
(AMERICAN PETROLEUM INSTITUTE) API 5L API Spec. 6D API Std. 598 API Std. 600 API Std. 602 API Std. 1104 CHAPTER-4 "Specification for Line Pipe" "Specification for Pipeline Valves" "Valve Inspection and Test" "Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries" "Compact Carbon Steel Gate Valves" "Standard for Welding of Pipelines and Related Facilities" "Proving Systems"
DECEMBER, 2009
NIOEC-SP-70-12(2)
ASME (AMERICAN SOCIETY OF MECHANICAL ENGINEERS) ASME-Sec. VIII BSI "Boiler and Pressure Vessels Code for"
(BRITISH STANDARDS INSTITUTION) BS 1414 BS 1501 BS 1503 BS 1504 BS 1506 BS 1560 Part 3 BS 3293 BS 3799 BS 6169 Part 1 Part 2 "Steel Wedge Gate Valves Flanged and Butt Welding Ends" "Steels for Pressure Purposes: Plates, Sheet and Strip" "Steel Forgings for Pressure Purposes" "Steel Castings for Pressure Purposes" "Carbon, Low Alloy and Stainless Steel Bars and Billets for Bolting Material to be Used in Pressure Retaining Applications" "Steel Pipe Flanges and Flanged Fittings for the Petroleum Industry" "Carbon Steel Pipe Flanges for Petroleum Industry" "Steel Pipe Fittings, Screwed and Socket Welding for Petroleum Industry" "Volumetric Measurement of Liquid Hydrocarbon" "Displacement Meter System" "Turbine Meter Systems"
IP
IPS
(IRANIAN PETROLEUM STANDARD) IPS-C-IN-240 IPS-E-IN-240 IPS-M-IN-240 Construction Standard for Measurement of Liquid Hydrocarbons Custody Transfer Engineering Standard for Measurement of Liquid Hydrocarbons Material Standard for Volumetric Liquid Measurement Methods
ISA
(INSTRUMENTATION, SYSTEMS, AND AUTOMATION SOCIETY OF AMERICA) RP 31.3 "Specification, Installation, and Calibration of Turbine Flow Meters"
DECEMBER, 2009
NIOEC-SP-70-12(2)
NIOEC-SP (NIOEC SPECIFICATIONS) NIOEC-SP-70-01 NIOEC-SP-00-10 Specification for Instrumentation Specification for Units
3. UNITS International System of Units (SI) shall be used in accordance with NIOEC-SP-00-10, unless otherwise specified. 4. DEFINITIONS
In cases where this specification is part of a direct order, Purchaser shall mean National Iranian Oil Engineering and Construction Company. Where this specification forms part of contract documents, purchaser shall mean contractor. In references to inspection by purchaser when this specification forms part of contract documents this shall be construed to mean that NIOEC shall also have the right of inspection.