Professional Documents
Culture Documents
Product Catalogue
2013
Table of Contents
Background 3
Shooter Mats
Drag Bags
Discrete Bags
10
13
Duffle Bags
15
Grab-Bags
17
Range Bags
19
21
Tactical Vests
22
23
25
Suppressors
30
Ghillie Suits
31
33
Order Form
38
2|Page
3|P age
B-TACT (TACTICAL ACCESSORIES) CC PRODUCTS: TACTICAL SLINGS & BELTS Tactical Sling: Single Point with bungee cord
A tactical sling permits fast and easy transition between your primary weapon and other weapon systems. Product code: TS 001
Rifle Sling
A Plain rifle sling 50mm wide Product code: TS 003
4|P age
5|P age
Tactical Weigh belt: This stiff tactical belt is 50mm in width and has a quick release buckle, with Velcro adjuster. This belt design makes it ideal for use of drop leg rigs
Product code: TS 010
6|P age
7|P age
8|P age
9|P age
10 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC PRODUCTS: DISCRETE BAGS (continue.) Discrete Bag: Handgun Caddy
Deep bag, with no extras fitted on the outside of the bag. It has 5 magazine pouches. It has an inner sleeve, to keep 2 handguns in position and for extra protection. Molle System can be fitted to expand versatility (Handguns & Magazines NOT Included) Product code: DGC 001
11 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC PRODUCTS: DISCRETE BAGS (continue.) Discrete Bag: Handgun Traveler - Basic
Zip pouch, with wrist sling. No extras fitted on the outside of the bag. It has 2 magazine sleeves and a small utility pouch. It will hold 1x large handguns (e.g. Beretta 92F) in position underneath an additional sleeve for extra protection. Molle System can be fitted to expand versatility. (Handgun and Magazines NOT Included) Product code: DGC 004
12 | P a g e
13 | P a g e
14 | P a g e
15 | P a g e
16 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC PRODUCTS: GRAB-BAGS GRAB-BAG: Assault (with molle system)
This Grab-Bag is manufactured with Rip Stop Canvas, with Molle System all round for easy custom fitment of pouches and utilities. It allows for a hydration pack to be fitted in the back It also features a padded waist belt. (Currently available in: Black, Military Green, Navy Blue) Product code: GB 001 DISCONTINUED
17 | P a g e
18 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC PRODUCTS: RANGE BAGS Range Bag: Large (with Molle System)
This Range Bag is manufactured with Rip Stop Canvas. It has Molle System right round for easy custom fitment of pouches and utilities. The sides are padded with SVA closed cell foam. Dimensions: 450mm x 220mm x 240mm (Currently available in: Black, Military Green, Navy Blue and Light Brown) Product code: RB 001
19 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC PRODUCTS: RANGE BAGS (continue.) Range Bag: Medium (NEW!!!!)
This Range Bag is manufactured with Rip Stop Canvas, with 1 (one) large compartment and 2 (two) side pouches. Every compartment has YKK RC zip chain with 2 (two) steel sliders per compartment and pouch. The removable stiffeners inside the bag are padded with SVA closed cell foam for durability. Dimensions: 380mm x 280mm x 200mm (Currently available in: Black, Military Green, Navy Blue and Light Brown) Product code: RB 002
20 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC PRODUCTS: MAG-GRIP, SCOPE GUARD and SUPPRESSOR COVER
Mag-Grip:
This product gives one the ability to strap two magazines side by side. The blocks are made from aluminum for durability (set on left) Magazine grips used in the set on the right are imported on special request. (Magazines Not Included) Product code: MG 001
Suppressor Cover:
This Cover is manufactured with Rip Stop Canvas and helps to insulate the suppressor. The heat built up in a suppressor during shooting can cause a mirage in front of the scope. (Suppressor NOT Included) Product code: SC 001
21 | P a g e
22 | P a g e
23 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC PRODUCTS: DROP LEG RIGS AND HOLSTERS (continue.)
24 | P a g e
25 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC PRODUCTS: POUCHES AND PATCHES (continue) Ammunition Patch: (Molle system)
This patch can be strapped into or onto tactical vests, bags or drop leg rigs that employ Molle system for easy access for e.g. 12GA Shotgun ammunition (Dummy rounds sold separately) Product code: PS 003
26 | P a g e
DISCONTINUED
27 | P a g e
28 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC PRODUCTS: POUCHES AND PATCHES (continue.) Club Magazine Pouch:
This bag is manufactured with 600D material or Rip Stop Canvas for durability and can accommodate 8 (eight) double stack magazines or 16 (sixteen) 1911 type single stack magazines. (Magazines NOT Included) Product code: PS 013
29 | P a g e
Suppressor: NOTE:
Other caliber suppressors also available to be made on request of client.
30 | P a g e
NOTE: All Ghillie suits are available in 2 (two) variations: 1. Burlap and Jute coverage 2. Jute coverage only
31 | P a g e
32 | P a g e
4.
Applicable Law The Quotation, Purchase Order and any Agreement that shall result there from shall be governed by the laws of the Republic of South Africa.
5.
Payment 5.1. Unless otherwise agreed to in writing, the Customer shall effect payment for the Goods with placement of order. Interest shall be paid on all overdue amounts at the rate of 1,5% per month or part thereof unless otherwise agreed. 5.2. All prices quoted are exclusive of VAT unless otherwise stated. 5.3. All prices quoted are exclusive of postage charges unless otherwise stated.
33 | P a g e
34 | P a g e
9.
Packaging, Packing and Shipment Packing will be in accordance with the Closed Corporations standards, unless otherwise specified in writing. Any special packing required by the Customer will be charged for as an extra.
10. Cancellation 10.1. In the event of cancellation by the Customer of the contract or part thereof, or in the event of the Closed Corporation canceling the contract as a result of a breach by the Customer of any of these conditions, the Closed Corporation shall be entitled to payment of a standard cancellation fee not less than 50% of the value of the contract so cancelled, or in the case where a 50% deposit was paid by the Customer it will so be forfeited by the Customer to the Closed Corporation plus : 10.1.1. 10.1.2. 10.1.3. The sales value of all Goods delivered. The sales value of all Goods finished and not delivered at the time of such cancellation. The sales value of all materials ordered by the Closed Corporation especially for such order whether such materials have been received or not. The cost of all labour accumulated on any unfinished Goods in process of manufacture. The sales value of any special engineering and other costs incurred up to the time of cancellation.
10.1.4. 10.1.5.
10.2. The Closed Corporation shall be entitled to suspend or cancel further deliveries and to suspend or cancel work under this or any other contract between the Closed Corporation and the Purchaser if any payment is overdue. 10.3. The Closed Corporation may, by notice in writing, cancel the Purchase Order if the Customer becomes insolvent or makes an arrangement with its creditors or goes into voluntary liquidation or is placed under a provisional or final order of sequestration or judicial management. 11. Warranty 11.1. Unless otherwise agreed in writing, the Closed Corporation warrants that in the event of any defect occurring within a period of one year or any other period as agreed to in writing from the date of delivery to the Customer, as a result of faulty material or workmanship which can be attributed to the Closed Corporation, the Closed Corporation will repair, or refund the cost of the Goods at its option provided that : 11.1.1. The Goods have not been misused, inadequately stored, neglected or used for other than its intended purpose, or if its operating instructions have not been adhered to; The Goods have not been serviced by any person who has not been authorized by the Closed Corporation; The Closed Corporation is notified in writing within the warranty period and the Goods or faulty component thereof is sent to the Closed Corporation's designated address at the Customer's risk.
11.1.2. 11.1.3.
11.2. Should any parts, materials or components forming part of the Goods sold by the Closed Corporation to the Customer, be manufactured by anyone else than the Closed Corporation, then the manufacturer's normal warranty in respect of those parts, materials or components shall apply and no further warranties in this regard will be given by the Closed Corporation. The Closed Corporation's liability will not extend beyond that of the manufacturer's liability.
35 | P a g e
12. Return of Goods 12.1. The Customer shall not be entitled to return any Goods to the Closed Corporation without the Closed Corporation's express consent. 12.2. Unless otherwise agreed in writing, the Closed Corporation's normal express consent for the return of Goods shall be by means of a Return Material Authorization (RMA). 12.3. No claim regarding material defects will be entertained by the Closed Corporation unless made in writing and delivered to the Closed Corporation within the warranty period from the date of delivery of the Goods. 12.4. In the event of material defects or shortages in the Goods proved to the Closed Corporation's satisfaction and upon being properly notified, the Closed Corporation shall at its option : 12.4.1. 12.4.2. Either exchange the Goods for similar Goods; or Repair the Goods.
12.5. If no material faults are found with the Goods, then the Closed Corporation will charge a handling fee of 50% of the sales price of the Goods. 13. Indemnity The Customer shall indemnify the Closed Corporation against all damages, penalties, costs, charges and expenses to which the Closed Corporation may become liable as a result of work done in accordance with the Customer's drawings and/or specifications. 14. Liability 14.1. These terms set out the Closed Corporations entire liability in respect of the Goods and the Closed Corporation's liability under these terms shall be in lieu and to the exclusion of all other warranties, conditions, terms and liabilities expressed or implied statutory or otherwise in respect of the quality or the fitness for any particular purpose of the Goods. 14.2. The Closed Corporation shall not, under any circumstances, be liable for: 14.2.1. Any loss or injury whatsoever (including indirect or consequential loss including loss of profit) arising from the supply of the Goods, including any loss or injury (whether direct, indirect or consequential) attributed to any negligent act of the Closed Corporation or the Closed Corporation's servants or agents'; or Any representations or warranties as to the Goods given by any of the Closed Corporations servants or agents; Any loss or injury (whether direct, indirect or consequential) attributed to any misuse of the Goods or any negligent act by the Customer.
14.2.2. 14.2.3.
15. Intellectual Property Rights Any patent, copyright or other intellectual property rights owned by the Closed Corporation shall remain those of the Closed Corporation whether or not the purchase price under that transaction has been paid by the Customer. Any information obtained by the Customer from the Closed Corporation which is identified as confidential and/or proprietary or is confidential and/or proprietary in nature, may not be disclosed to any third party without the prior written approval of the Closed Corporation.
36 | P a g e
16. General 16.1. 16.2. This document constitutes the sole and entire agreement between the parties. The Closed Corporation shall not be bound by any express or implied term, representation, warranty, promise or the like not recorded herein. No addition to, variation of, or agreed cancellation of this contract shall be of any force or effect unless reduced to writing and signed by both parties. No indulgence which the Closed Corporation may grant to the Customer party shall constitute a waiver of any of the rights of the Closed Corporation, who shall not thereby be precluded from exercising any rights against the Customer which may have arisen in the past or which might arise in the future.
16.3.
16.4.
17. Notices All notices or demands to either party shall be in writing and may be served by hand delivery, registered mail, e-mail or facsimile at the address of the receiving party as set forth in the Request for Quotation, Quotation or Purchase Order as applicable. All notices and demands by mail shall be deemed to have been received within seven (7) days of postage, unless proved otherwise by the receiving party.
37 | P a g e
B-TACT (TACTICAL ACCESSORIES) CC ORDER FORM Kindly submit the completed form per e-mail at info@b-tact.co.za or per fax to 086 670 6256.
PRODUCT CODE ADDITIONAL DESCRIPTION COLOUR SIZE QUANTITY
NAME SURNAME CONTACT NUMBER FAX NUMBER E-MAIL ADDRESS PREFERED CONTACT HOURS
38 | P a g e