Professional Documents
Culture Documents
P N M T
ASOLINK
ETWORK
ANAGEMENT
ERMINAL
NEC Corporation
Copyright 2002
ROI-S03514
Table of Contents
1. 2. 3. 4. 5. 6. 7. 8. Hardware/Software Recommendations .....................................................................................1 Order of Installation ...................................................................................................................2 Windows NT RAS Setup (Windows NT networking is not yet installed.)................................3 Windows NT RAS Setting (Windows NT with networking already installed) ...................13 Dial-up Setting..........................................................................................................................16 Confirmation of Dial Up Setting ..............................................................................................19 PNMT Setup..............................................................................................................................22 Launching PNMT .....................................................................................................................27
ROI-S03668
1. Hardware/Software Recommendations
1.1. Hardware Configuration for Mobile Terminal (PNMT) Recommended PNMT mobile PC configuration:
Laptop PC with TFT DISPLAY (IBM PC or compatible) CPU: RAM: HDD: FDD: Pentium-400 or higher 128 MB or more 2 GB or more 3.5 x 1 8 X or higher
CD-ROM:
1.2.
Software Configuration for Mobile terminal (PNMT) All structured and modular programs used in PNMT are resident in the hard disk and RAM of the personal computer. The Windows operating system is employed which is capable of multi-task processing using the Pentium microprocessor. The PNMT software basically consist of two parts, the operating system and the application programs . The operating system -Windows 95(English Version) or -Windows 98(English Version) or -Windows NT Workstation Ver4.0 (English Version) with SP6.0 or higher -Windows 2000 (English Version) with SP 2.0 or higher The application programs IE 5.0 or higher PNMT Software
ROI-S03668
2. Order of Installation
Notice -Before installing PNMT, Installation of Internet Explorer 5.0 or more is required. -Installation of Acrobat Reader is also required in order to see a help file.
ROI-S03668
(3)
Check on Remote access to the network box on Network Setup Wizard, and Cclick on Next button to continue.
ROI-S03668
(4)
(5)
ROI-S03668
(6)
Select all network services on the list and click on Next button to continue.
(7)
ROI-S03668
(8)
Insert Windows NT Installation CD and input Path. Then click on Continue button.
(9)
ROI-S03668
(11) Check on Dont detect my modem box and click on Next button to continue.
(12) Select Standard Modem Types and Standard 19200 Modem from Manufacturers and Models list respectively. Click on Next button to continue.
ROI-S03668
(13) Select Selected ports and COM1, then click on Next button to continue. If you are using multi-port configuration, select All ports to install the standard 19200 bps modem driver to all available COM ports.
ROI-S03668
(15) Select COM1-Standard 19200 bps Modem and click on OK button to continue.
(16) Click on Yes button on the confirmation message window to apply new settings.
(17) Verify that COM1 Standard 19200 bps Modem is displayed on the list. Click on Continue button.
ROI-S03668
10
ROI-S03668
11
ROI-S03668
(22) Confirmation to reset Windows NT. Click on Yes button. The Windows NT will reset and the changes will take effect after the startup.
12
ROI-S03668
(2)
13
ROI-S03668
(3)
(4)
Follow steps (8) to (17) of the previous chapter (Chapter 2 Windows NT RAS Setup (Windows NT) networking is not yet installed.).
(5)
14
ROI-S03668
(6)
Confirmation to reset Windows NT. Click on Yes button. The Windows NT will reset and the changes will take effect after the startup.
15
ROI-S03668
5. Dial-up Setting
(1) Click on [My Computer] Icon[Dial-up Networking] Icon Then click on OK button on the next prompt. If there are already existing dial-up connections, proceed to step 2.
(2)
On the [New Phonebook Entry Wizard] Window Type in pnmt on [Name the new phonebook entry]. Click on Next button to continue.
16
ROI-S03668
(3)
On the [Server] Window Check I am calling the Internet box then click on Next button.
(4)
On the [Phone Number] Window Type in 1234 (or other dummy value) on [Phone number]. Click on Next button to continue.
17
ROI-S03668
(5)
On the [New Phonebook Entry Wizard] window Click on Finish button to complete the Dial-up Setting.
(6)
18
ROI-S03668
(2)
19
ROI-S03668
(3)
Click on Configure button and set the Initial speed to 19200 bps. Click on OK button when done.
(4)
On the Server tab, verify that the Dial-up server type is set to PPP:Windows NT, Windows 95 Plus, Internet and that TCP/IP box is checked.
20
ROI-S03668
(5)
Click on TCP/IP Settings button and verify that Server assigned IP address is selected. Force IP header compression and Use default gateway on remote network box should both be checked. Note the most of this are default settings that only needed to be confirmed.
21
ROI-S03668
7. PNMT Setup
(1) Double-click the setup.exe of PNMT from the folder of CD-ROM.
(2)
22
ROI-S03668
(3)
(4) Specify the folder where you want to install. Then click Next button.
23
ROI-S03668
24
ROI-S03668
(7) The end message of installation. When you push the Close button, it is the completion of installation.
25
ROI-S03668
Note: You may be required to re-start Windows NT during the installation process due to updates done on some system files by the PNMT installer. If this occurs, please start installation again after re-start.
26
ROI-S03668
8. Launching PNMT
[1] Click on Start | Programs |PNMT |PNMT to start the application.
[2] Default user name and password are: After installation of PNMT, Initial password is listed below. User name: Password : Admin (No initial password defined. Just press on Enter key. The password can then be modified.)
27